This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
Previously, in the loop in postgresAcquireSampleRowsFunc() to iterate
fetching rows from a given remote table, we redundantly 1) determined the
fetch size by parsing the table's server/table-level options and then 2)
constructed the fetch command; remove that redundancy.
Author: Etsuro Fujita
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAPmGK17_urk9qkLV65_iYMFw64z5qhdfhY=tMVV6Jg4KNYx8+w@mail.gmail.com
Commit aa09cd242 modified estimate_path_cost_size() so that it reuses
cached costs of a basic foreign path for a given foreign-base/join
relation when costing pre-sorted foreign paths for that relation, but it
incorrectly re-computed retrieved_rows, an estimated number of rows
fetched from the remote side, which is needed for costing both the basic
and pre-sorted foreign paths. To fix, handle retrieved_rows the same way
as the cached costs: store in that relation's fpinfo the retrieved_rows
estimate computed for costing the basic foreign path, and reuse it when
costing the pre-sorted foreign paths. Also, reuse the rows/width
estimates stored in that relation's fpinfo when costing the pre-sorted
foreign paths, to make the code consistent.
In commit ffab494a4, to extend the costing mentioned above to the
foreign-grouping case, I made a change to add_foreign_grouping_paths() to
store in a given foreign-grouped relation's RelOptInfo the rows estimate
for that relation for reuse, but this patch makes that change unnecessary
since we already store the row estimate in that relation's fpinfo, which
this patch reuses when costing a foreign path for that relation with the
sortClause ordering; remove that change.
In passing, fix thinko in commit 7012b132d: in estimate_path_cost_size(),
the width estimate for a given foreign-grouped relation to be stored in
that relation's fpinfo was reset incorrectly when costing a basic foreign
path for that relation with local stats.
Apply the patch to HEAD only to avoid destabilizing existing plan choices.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK17jaJLPDEkgnP2VmkOg=5wT8YQ1CqssU8JRpZ_NSE+dqQ@mail.gmail.com
Previously, in postgresPlanForeignModify, we planned an UPDATE operation
on a foreign table so that we transmit only columns that were explicitly
targets of the UPDATE, so as to avoid unnecessary data transmission, but
if there were BEFORE ROW UPDATE triggers on the foreign table, those
triggers might change values for non-target columns, in which case we
would miss sending changed values for those columns. Prevent optimizing
away transmitting all columns if there are BEFORE ROW UPDATE triggers on
the foreign table.
This is an oversight in commit 7cbe57c34 which added triggers on foreign
tables, so apply the patch all the way back to 9.4 where that came in.
Author: Shohei Mochizuki
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/201905270152.x4R1q3qi014550@toshiba.co.jp
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
In commit 7012b132d0, which added support for aggregate pushdown in
postgres_fdw, the expense of evaluating the final scan/join target
computed by make_group_input_target() was not accounted for at all in
costing aggregate pushdown paths with local statistics. The right fix
for this would be to have a separate upper stage to adjust the final
scan/join relation (see comments for apply_scanjoin_target_to_paths());
but for now, fix by adding the tlist eval cost when costing aggregate
pushdown paths with local statistics.
Apply this to HEAD only to avoid destabilizing existing plan choices.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska
Discussion: https://postgr.es/m/5C66A056.60007%40lab.ntt.co.jp
foreign_grouping_ok() is willing to put fairly arbitrary expressions into
the targetlist of a remote SELECT that's doing grouping or aggregation on
the remote side, including expressions that have no foreign component to
them at all. This is possibly a bit dubious from an efficiency standpoint;
but it rises to the level of a crash-causing bug if the expression is just
a Param or non-foreign Var. In that case, the expression will necessarily
also appear in the fdw_exprs list of values we need to send to the remote
server, and then setrefs.c's set_foreignscan_references will mistakenly
replace the fdw_exprs entry with a Var referencing the targetlist result.
The root cause of this problem is bad design in commit e7cb7ee14: it put
logic into set_foreignscan_references that IMV is postgres_fdw-specific,
and yet this bug shows that it isn't postgres_fdw-specific enough. The
transformation being done on fdw_exprs assumes that fdw_exprs is to be
evaluated with the fdw_scan_tlist as input, which is not how postgres_fdw
uses it; yet it could be the right thing for some other FDW. (In the
bigger picture, setrefs.c has no business assuming this for the other
expression fields of a ForeignScan either.)
The right fix therefore would be to expand the FDW API so that the
FDW could inform setrefs.c how it intends to evaluate these various
expressions. We can't change that in the back branches though, and we
also can't just summarily change setrefs.c's behavior there, or we're
likely to break external FDWs.
As a stopgap, therefore, hack up postgres_fdw so that it won't attempt
to send targetlist entries that look exactly like the fdw_exprs entries
they'd produce. In most cases this actually produces a superior plan,
IMO, with less data needing to be transmitted and returned; so we probably
ought to think harder about whether we should ship tlist expressions at
all when they don't contain any foreign Vars or Aggs. But that's an
optimization not a bug fix so I left it for later. One case where this
produces an inferior plan is where the expression in question is actually
a GROUP BY expression: then the restriction prevents us from using remote
grouping. It might be possible to work around that (since that would
reduce to group-by-a-constant on the remote side); but it seems like a
pretty unlikely corner case, so I'm not sure it's worth expending effort
solely to improve that. In any case the right long-term answer is to fix
the API as sketched above, and then revert this hack.
Per bug #15781 from Sean Johnston. Back-patch to v10 where the problem
was introduced.
Discussion: https://postgr.es/m/15781-2601b1002bad087c@postgresql.org
Commit 3d956d9562 added support for update row movement in postgres_fdw.
This patch fixes the following issues introduced by that commit:
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel that would be updated later, the UPDATE that
used a direct modification plan modified those routed rows incorrectly
because those routed rows were visible to the later UPDATE command.
The right fix for this would be to have some way in postgres_fdw in
which the later UPDATE command ignores those routed rows, but it seems
hard to do so with the current infrastructure. For now throw an error
in that case.
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel, fmstate created for the UPDATE that used a
non-direct modification plan was mistakenly overridden by another
fmstate created for inserting those routed rows into the partition.
This caused 1) server crash when the partition would be updated later,
and 2) resource leak when the partition had been already updated. To
avoid that, adjust the treatment of the fmstate for the inserting. As
for #1, since we would also have the incorrectness issue as mentioned
above, error out in that case as well.
Update the docs to mention that postgres_fdw currently does not handle
the case where a remote partition chosen to insert a routed row into is
also an UPDATE subplan target rel that will be updated later.
Author: Amit Langote and Etsuro Fujita
Reviewed-by: Amit Langote
Backpatch-through: 11 where row movement in postgres_fdw was added
Discussion: https://postgr.es/m/21e7eaa4-0d4d-20c2-a1f7-c7e96f4ce440@lab.ntt.co.jp
As reported by Tom, when ExecStoreMinimalTuple() had to perform a
conversion to store the minimal tuple in the slot, it forgot to
respect the shouldFree flag, and leaked the tuple into the current
memory context if true. Fix that by freeing the tuple in that case.
Looking at the relevant code made me (Andres) realize that not having
the shouldFree parameter to ExecForceStoreHeapTuple() was a bad
idea. Some callers had to locally implement the necessary logic, and
in one case it was missing, creating a potential per-group leak in
non-hashed aggregation.
The choice to not free the tuple in ExecComputeStoredGenerated() is
not pretty, but not introduced by this commit - I'll start a separate
discussion about it.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/366.1555382816@sss.pgh.pa.us
Similarly to the set of parameters for keepalive, a connection parameter
for libpq is added as well as a backend GUC, called tcp_user_timeout.
Increasing the TCP user timeout is useful to allow a connection to
survive extended periods without end-to-end connection, and decreasing
it allows application to fail faster. By default, the parameter is 0,
which makes the connection use the system default, and follows a logic
close to the keepalive parameters in its handling. When connecting
through a Unix-socket domain, the parameters have no effect.
Author: Ryohei Nagaura
Reviewed-by: Fabien Coelho, Robert Haas, Kyotaro Horiguchi, Kirk
Jamison, Mikalai Keida, Takayuki Tsunakawa, Andrei Yahorau
Discussion: https://postgr.es/m/EDA4195584F5064680D8130B1CA91C45367328@G01JPEXMBYT04
The upper-planner pathification allows FDWs to arrange to push down
different types of upper-stage operations to the remote side. This
commit teaches postgres_fdw to do it for the (FINAL, NULL) upperrel,
which is responsible for doing LockRows, LIMIT, and/or ModifyTable.
This provides the ability for postgres_fdw to handle SELECT commands
so that it 1) skips the LockRows step (if any) (note that this is
safe since it performs early locking) and 2) pushes down the LIMIT
and/or OFFSET restrictions (if any) to the remote side. This doesn't
handle the INSERT/UPDATE/DELETE cases.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska and Jeff Janes
Discussion: https://postgr.es/m/87pnz1aby9.fsf@news-spur.riddles.org.uk
The upper-planner pathification allows FDWs to arrange to push down
different types of upper-stage operations to the remote side. This
commit teaches postgres_fdw to do it for the (ORDERED, NULL) upperrel,
which is responsible for evaluating the query's ORDER BY ordering.
Since postgres_fdw is already able to evaluate that ordering remotely
for foreign baserels and foreign joinrels (see commit aa09cd242f et al.),
this adds support for that for foreign grouping relations.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska and Jeff Janes
Discussion: https://postgr.es/m/87pnz1aby9.fsf@news-spur.riddles.org.uk
Previously, the planner created RangeTblEntry and RelOptInfo structs
for every partition of a partitioned table, even though many of them
might later be deemed uninteresting thanks to partition pruning logic.
This incurred significant overhead when there are many partitions.
Arrange to postpone creation of these data structures until after
we've processed the query enough to identify restriction quals for
the partitioned table, and then apply partition pruning before not
after creation of each partition's data structures. In this way
we need not open the partition relations at all for partitions that
the planner has no real interest in.
For queries that can be proven at plan time to access only a small
number of partitions, this patch improves the practical maximum
number of partitions from under 100 to perhaps a few thousand.
Amit Langote, reviewed at various times by Dilip Kumar, Jesper Pedersen,
Yoshikazu Imai, and David Rowley
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
This is an SQL-standard feature that allows creating columns that are
computed from expressions rather than assigned, similar to a view or
materialized view but on a column basis.
This implements one kind of generated column: stored (computed on
write). Another kind, virtual (computed on read), is planned for the
future, and some room is left for it.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b151f851-4019-bdb1-699e-ebab07d2f40a@2ndquadrant.com
We've been creating duplicate RTEs for partitioned tables just
because we do so for regular inheritance parent tables. But unlike
regular-inheritance parents which are themselves regular tables
and thus need to be scanned, partitioned tables don't need the
extra RTE.
This makes the conditions for building a child RTE the same as those
for building an AppendRelInfo, allowing minor simplification in
expand_single_inheritance_child. Since the planner's actual processing
is driven off the AppendRelInfo list, nothing much changes beyond that,
we just have one fewer useless RTE entry.
Amit Langote, reviewed and hacked a bit by me
Discussion: https://postgr.es/m/9d7c5112-cb99-6a47-d3be-cf1ee6862a1d@lab.ntt.co.jp
If there's only one child relation, the Append or MergeAppend isn't
doing anything useful, and can be elided. It does have a purpose
during planning though, which is to serve as a buffer between parent
and child Var numbering. Therefore we keep it all the way through
to setrefs.c, and get rid of it only after fixing references in the
plan level(s) above it. This works largely the same as setrefs.c's
ancient hack to get rid of no-op SubqueryScan nodes, and can even
share some code with that.
Note the change to make setrefs.c use apply_tlist_labeling rather than
ad-hoc code. This has the effect of propagating the child's resjunk
and ressortgroupref labels, which formerly weren't propagated when
removing a SubqueryScan. Doing that is demonstrably necessary for
the [Merge]Append cases, and seems harmless for SubqueryScan, if only
because trivial_subqueryscan is afraid to collapse cases where the
resjunk marking differs. (I suspect that restriction could now be
removed, though it's unclear that it'd make any new matches possible,
since the outer query can't have references to a child resjunk column.)
David Rowley, reviewed by Alvaro Herrera and Tomas Vondra
Discussion: https://postgr.es/m/CAKJS1f_7u8ATyJ1JGTMHFoKDvZdeF-iEBhs+sM_SXowOr9cArg@mail.gmail.com
In preparation for abstracting table storage, convert trigger.c to
track tuples in slots. Which also happens to make code calling
triggers simpler.
As the calling interface for triggers themselves is not changed in
this patch, HeapTuples still are extracted from the slot at that
time. But that's handled solely inside trigger.c, not visible to
callers. It's quite likely that we'll want to revise the external
trigger interface, but that's a separate large project.
As part of this work the slots used for old/new/return tuples are
moved from EState into ResultRelInfo, as different updated tables
might need different slots. The slots are now also now created
on-demand, which is good both from an efficiency POV, but also makes
the modifying code simpler.
Author: Andres Freund, Amit Khandekar and Ashutosh Bapat
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Historically we've always materialized the full output of a CTE query,
treating WITH as an optimization fence (so that, for example, restrictions
from the outer query cannot be pushed into it). This is appropriate when
the CTE query is INSERT/UPDATE/DELETE, or is recursive; but when the CTE
query is non-recursive and side-effect-free, there's no hazard of changing
the query results by pushing restrictions down.
Another argument for materialization is that it can avoid duplicate
computation of an expensive WITH query --- but that only applies if
the WITH query is called more than once in the outer query. Even then
it could still be a net loss, if each call has restrictions that
would allow just a small part of the WITH query to be computed.
Hence, let's change the behavior for WITH queries that are non-recursive
and side-effect-free. By default, we will inline them into the outer
query (removing the optimization fence) if they are called just once.
If they are called more than once, we will keep the old behavior by
default, but the user can override this and force inlining by specifying
NOT MATERIALIZED. Lastly, the user can force the old behavior by
specifying MATERIALIZED; this would mainly be useful when the query had
deliberately been employing WITH as an optimization fence to prevent a
poor choice of plan.
Andreas Karlsson, Andrew Gierth, David Fetter
Discussion: https://postgr.es/m/87sh48ffhb.fsf@news-spur.riddles.org.uk
Add support function requests for estimating the selectivity, cost,
and number of result rows (if a SRF) of the target function.
The lack of a way to estimate selectivity of a boolean-returning
function in WHERE has been a recognized deficiency of the planner
since Berkeley days. This commit finally fixes it.
In addition, non-constant estimates of cost and number of output
rows are now possible. We still fall back to looking at procost
and prorows if the support function doesn't service the request,
of course.
To make concrete use of the possibility of estimating output rowcount
for SRFs, this commit adds support functions for array_unnest(anyarray)
and the integer variants of generate_series; the lack of plausible
rowcount estimates for those, even when it's obvious to a human,
has been a repeated subject of complaints. Obviously, much more
could now be done in this line, but I'm mostly just trying to get
the infrastructure in place.
Discussion: https://postgr.es/m/15193.1548028093@sss.pgh.pa.us
Up to now postgres_fdw has been using create_foreignscan_path() to
generate not only base-relation paths, but also paths for foreign joins
and foreign upperrels. This is wrong, because create_foreignscan_path()
calls get_baserel_parampathinfo() which will only do the right thing for
baserels. It accidentally fails to fail for unparameterized paths, which
are the only ones postgres_fdw (thought it) was handling, but we really
need different APIs for the baserel and join cases.
In HEAD, the best thing to do seems to be to split up the baserel,
joinrel, and upperrel cases into three functions so that they can
have different APIs. I haven't actually given create_foreign_join_path
a different API in this commit: we should spend a bit of time thinking
about just what we want to do there, since perhaps FDWs would want to
do something different from the build-up-a-join-pairwise approach that
get_joinrel_parampathinfo expects. In the meantime, since postgres_fdw
isn't prepared to generate parameterized joins anyway, just give it a
defense against trying to plan joins with lateral refs.
In addition (and this is what triggered this whole mess) fix bug #15613
from Srinivasan S A, by teaching file_fdw and postgres_fdw that plain
baserel foreign paths still have outer refs if the relation has
lateral_relids. Add some assertions in relnode.c to catch future
occurrences of the same error --- in particular, to catch other FDWs
doing that, but also as backstop against core-code mistakes like the
one fixed by commit bdd9a99aa.
Bug #15613 also needs to be fixed in the back branches, but the
appropriate fix will look quite a bit different there, since we don't
want to assume that existing FDWs get the word right away.
Discussion: https://postgr.es/m/15613-092be1be9576c728@postgresql.org
The old name of this file was never a very good indication of what it
was for. Now that there's also access/relation.h, we have a potential
confusion hazard as well, so let's rename it to something more apropos.
Per discussion, "pathnodes.h" is reasonable, since a good fraction of
the file is Path node definitions.
While at it, tweak a couple of other headers that were gratuitously
importing relation.h into modules that don't need it.
Discussion: https://postgr.es/m/7719.1548688728@sss.pgh.pa.us
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Discussion: https://postgr.es/m/11460.1548706639@sss.pgh.pa.us
estimate_path_cost_size() failed to re-use cached costs when the cached
startup/total cost was 0, so it calculated the costs redundantly.
This is an oversight in commit aa09cd242f; but apply the patch to HEAD
only because there are no reports of actual trouble from that.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/5C4AF3F3.4060409%40lab.ntt.co.jp
The fact that "SELECT expression" has no base relations has long been a
thorn in the side of the planner. It makes it hard to flatten a sub-query
that looks like that, or is a trivial VALUES() item, because the planner
generally uses relid sets to identify sub-relations, and such a sub-query
would have an empty relid set if we flattened it. prepjointree.c contains
some baroque logic that works around this in certain special cases --- but
there is a much better answer. We can replace an empty FROM clause with a
dummy RTE that acts like a table of one row and no columns, and then there
are no such corner cases to worry about. Instead we need some logic to
get rid of useless dummy RTEs, but that's simpler and covers more cases
than what was there before.
For really trivial cases, where the query is just "SELECT expression" and
nothing else, there's a hazard that adding the extra RTE makes for a
noticeable slowdown; even though it's not much processing, there's not
that much for the planner to do overall. However testing says that the
penalty is very small, close to the noise level. In more complex queries,
this is able to find optimizations that we could not find before.
The new RTE type is called RTE_RESULT, since the "scan" plan type it
gives rise to is a Result node (the same plan we produced for a "SELECT
expression" query before). To avoid confusion, rename the old ResultPath
path type to GroupResultPath, reflecting that it's only used in degenerate
grouping cases where we know the query produces just one grouped row.
(It wouldn't work to unify the two cases, because there are different
rules about where the associated quals live during query_planner.)
Note: although this touches readfuncs.c, I don't think a catversion
bump is required, because the added case can't occur in stored rules,
only plans.
Patch by me, reviewed by David Rowley and Mark Dilger
Discussion: https://postgr.es/m/15944.1521127664@sss.pgh.pa.us
Previously, estimate_path_cost_size() didn't account for tlist eval
costs, except when costing a foreign-grouping path using local
statistics, but such costs should be accounted for when costing that path
using remote estimates, because some of the tlist expressions might be
evaluated locally. Also, such costs should be accounted for in the case
of a foreign-scan or foreign-join path, because the tlist might contain
PlaceHolderVars, which postgres_fdw currently evaluates locally.
This also fixes an oversight in my commit f8f6e44676.
Like that commit, apply this to HEAD only to avoid destabilizing existing
plan choices.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/5BFD3EAD.2060301%40lab.ntt.co.jp
postgresExecForeignInsert(), postgresExecForeignUpdate(), and
postgresExecForeignDelete() are coded almost identically, except that
postgresExecForeignInsert() does not need CTID. Extract that code into
a separate function and use it in all the three function implementations.
Author: Ashutosh Bapat
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/CAFjFpRcz8yoY7cBTYofcrCLwjaDeCcGKyTUivUbRiA57y3v-bw%40mail.gmail.com
heapam.h previously was included in a number of widely used
headers (e.g. execnodes.h, indirectly in executor.h, ...). That's
problematic on its own, as heapam.h contains a lot of low-level
details that don't need to be exposed that widely, but becomes more
problematic with the upcoming introduction of pluggable table storage
- it seems inappropriate for heapam.h to be included that widely
afterwards.
heapam.h was largely only included in other headers to get the
HeapScanDesc typedef (which was defined in heapam.h, even though
HeapScanDescData is defined in relscan.h). The better solution here
seems to be to just use the underlying struct (forward declared where
necessary). Similar for BulkInsertState.
Another problem was that LockTupleMode was used in executor.h - parts
of the file tried to cope without heapam.h, but due to the fact that
it indirectly included it, several subsequent violations of that goal
were not not noticed. We could just reuse the approach of declaring
parameters as int, but it seems nicer to move LockTupleMode to
lockoptions.h - that's not a perfect location, but also doesn't seem
bad.
As a number of files relied on implicitly included heapam.h, a
significant number of files grew an explicit include. It's quite
probably that a few external projects will need to do the same.
Author: Andres Freund
Reviewed-By: Alvaro Herrera
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
COPY can skip writing WAL when loading data on a table which has been
created in the same transaction as the one loading the data, however
this cannot work on views or foreign table as this would result in
trying to flush relation files which do not exist. So disable the
optimization so as commands are able to work the same way with any
configuration of wal_level.
Tests are added to cover the different cases, which need to have
wal_level set to minimal to allow the problem to show up, and that is
not the default configuration.
Reported-by: Luis M. Carril, Etsuro Fujita
Author: Amit Langote, Michael Paquier
Reviewed-by: Etsuro Fujita
Discussion: https://postgr.es/m/15552-c64aa14c5c22f63c@postgresql.org
Backpatch-through: 10, where support for COPY on views has been added,
while v11 has added support for COPY on foreign tables.
The changes I made in 578b229718 assigned oids below
FirstBootstrapObjectId to objects in include/catalog/*.dat files that
did not have an oid assigned, starting at the max oid explicitly
assigned. Tom criticized that for mainly two reasons:
1) It's not clear which values are manually and which explicitly
assigned.
2) The space below FirstBootstrapObjectId gets pretty crowded, and
some PostgreSQL forks have used oids >= 9000 for their own objects,
to avoid conflicting.
Thus create a new range for objects not assigned explicit oids, but
assigned by genbki.pl. For now 1-9999 is for explicitly assigned oids,
FirstGenbkiObjectId (10000) to FirstBootstrapObjectId (1200) -1 is for
genbki.pl assigned oids, and < FirstNormalObjectId (16384) is for oids
assigned during bootstrap. It's possible that we'll have to adjust
these boundaries, but there's some headroom for now.
Add a note suggesting that oids in forks should be assigned in the
9000-9999 range.
Catversion bump for obvious reasons.
Per complaint from Tom Lane.
Author: Andres Freund
Discussion: https://postgr.es/m/16845.1544393682@sss.pgh.pa.us
postgres_fdw's postgresGetForeignPlan() assumes without checking that the
outer_plan it's given for a join relation must have a NestLoop, MergeJoin,
or HashJoin node at the top. That's been wrong at least since commit
4bbf6edfb (which could cause insertion of a Sort node on top) and it seems
like a pretty unsafe thing to Just Assume even without that.
Through blind good fortune, this doesn't seem to have any worse
consequences today than strange EXPLAIN output, but it's clearly trouble
waiting to happen.
To fix, test the node type explicitly before touching Join-specific
fields, and avoid jamming the new tlist into a node type that can't
do projection. Export a new support function from createplan.c
to avoid building low-level knowledge about the latter into FDWs.
Back-patch to 9.6 where the faulty coding was added. Note that the
associated regression test cases don't show any changes before v11,
apparently because the tests back-patched with 4bbf6edfb don't actually
exercise the problem case before then (there's no top-level Sort
in those plans).
Discussion: https://postgr.es/m/8946.1544644803@sss.pgh.pa.us
In commit 7012b132d0, which added aggregate
pushdown to postgres_fdw, we didn't account for the evaluation cost and the
selectivity of HAVING quals attached to ForeignPaths performing aggregate
pushdown, as core had never accounted for that for AggPaths and GroupPaths.
And we didn't set these values of the locally-checked quals (ie, fpinfo's
local_conds_cost and local_conds_sel), which were initialized to zeros, but
since estimate_path_cost_size factors in these to estimate the result size
and the evaluation cost of such a ForeignPath when the use_remote_estimate
option is enabled, this caused it to produce underestimated results in that
case.
By commit 7b6c075471 core was changed so that
it accounts for the evaluation cost and the selectivity of HAVING quals in
aggregation paths, so change the postgres_fdw's aggregate pushdown code as
well as such. This not only fixes the underestimation issue mentioned
above, but improves the estimation using local statistics in that function
when that option is disabled.
This would be a bug fix rather than an improvement, but apply it to HEAD
only to avoid destabilizing existing plan choices.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/5BFD3EAD.2060301%40lab.ntt.co.jp
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
Previously materializing a slot always returned a HeapTuple. As
current work aims to reduce the reliance on HeapTuples (so other
storage systems can work efficiently), that needs to change. Thus
split the tasks of materializing a slot (i.e. making it independent
from the underlying storage / other memory contexts) from fetching a
HeapTuple from the slot. For brevity, allow to fetch a HeapTuple from
a slot and materializing the slot at the same time, controlled by a
parameter.
For now some callers of ExecFetchSlotHeapTuple, with materialize =
true, expect that changes to the heap tuple will be reflected in the
underlying slot. Those places will be adapted in due course, so while
not pretty, that's OK for now.
Also rename ExecFetchSlotTuple to ExecFetchSlotHeapTupleDatum and
ExecFetchSlotTupleDatum to ExecFetchSlotHeapTupleDatum, as it's likely
that future storage methods will need similar methods. There already
is ExecFetchSlotMinimalTuple, so the new names make the naming scheme
more coherent.
Author: Ashutosh Bapat and Andres Freund, with changes by Amit Khandekar
Discussion: https://postgr.es/m/20181105210039.hh4vvi4vwoq5ba2q@alap3.anarazel.de
In the wake of commit f2343653f, we no longer need some fields that
were used before to control executor lock acquisitions:
* PlannedStmt.nonleafResultRelations can go away entirely.
* partitioned_rels can go away from Append, MergeAppend, and ModifyTable.
However, ModifyTable still needs to know the RT index of the partition
root table if any, which was formerly kept in the first entry of that
list. Add a new field "rootRelation" to remember that. rootRelation is
partly redundant with nominalRelation, in that if it's set it will have
the same value as nominalRelation. However, the latter field has a
different purpose so it seems best to keep them distinct.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
and whacked around a bit more by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Instead of doing a lot of list_nth() accesses to es_range_table,
create a flattened pointer array during executor startup and index
into that to get at individual RangeTblEntrys.
This eliminates one source of O(N^2) behavior with lots of partitions.
(I'm not exactly convinced that it's the most important source, but
it's an easy one to fix.)
Amit Langote and David Rowley
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Create an array estate->es_relations[] paralleling the es_range_table,
and store references to Relations (relcache entries) there, so that any
given RT entry is opened and closed just once per executor run. Scan
nodes typically still call ExecOpenScanRelation, but ExecCloseScanRelation
is no more; relation closing is now done centrally in ExecEndPlan.
This is slightly more complex than one would expect because of the
interactions with relcache references held in ResultRelInfo nodes.
The general convention is now that ResultRelInfo->ri_RelationDesc does
not represent a separate relcache reference and so does not need to be
explicitly closed; but there is an exception for ResultRelInfos in the
es_trig_target_relations list, which are manufactured by
ExecGetTriggerResultRel and have to be cleaned up by
ExecCleanUpTriggerState. (That much was true all along, but these
ResultRelInfos are now more different from others than they used to be.)
To allow the partition pruning logic to make use of es_relations[] rather
than having its own relcache references, adjust PartitionedRelPruneInfo
to store an RT index rather than a relation OID.
Amit Langote, reviewed by David Rowley and Jesper Pedersen,
some mods by me
Discussion: https://postgr.es/m/468c85d9-540e-66a2-1dde-fec2b741e688@lab.ntt.co.jp
Upcoming changes introduce further types of tuple table slots, in
preparation of making table storage pluggable. New storage methods
will have different representation of tuples, therefore the slot
accessor should refer explicitly to heap tuples.
Instead of just renaming the functions, split it into one function
that accepts heap tuples not residing in buffers, and one accepting
ones in buffers. Previously one function was used for both, but that
was a bit awkward already, and splitting will allow us to represent
slot types for tuples in buffers and normal memory separately.
This is split out from the patch introducing abstract slots, as this
largely consists out of mechanical changes.
Author: Ashutosh Bapat
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/20180220224318.gw4oe5jadhpmcdnm@alap3.anarazel.de
Commit f49842d, which added support for partitionwise joins, built the
child's tlist by applying adjust_appendrel_attrs() to the parent's. So in
the case where the parent's included a whole-row Var for the parent, the
child's contained a ConvertRowtypeExpr. To cope with that, that commit
added code to the planner, such as setrefs.c, but some code paths still
assumed that the tlist for a scan (or join) rel would only include Vars
and PlaceHolderVars, which was true before that commit, causing errors:
* When creating an explicit sort node for an input path for a mergejoin
path for a child join, prepare_sort_from_pathkeys() threw the 'could not
find pathkey item to sort' error.
* When deparsing a relation participating in a pushed down child join as a
subquery in contrib/postgres_fdw, get_relation_column_alias_ids() threw
the 'unexpected expression in subquery output' error.
* When performing set_plan_references() on a local join plan generated by
contrib/postgres_fdw for EvalPlanQual support for a pushed down child
join, fix_join_expr() threw the 'variable not found in subplan target
lists' error.
To fix these, two approaches have been proposed: one by Ashutosh Bapat and
one by me. While the former keeps building the child's tlist with a
ConvertRowtypeExpr, the latter builds it with a whole-row Var for the
child not to violate the planner assumption, and tries to fix it up later,
But both approaches need more work, so refuse to generate partitionwise
join paths when whole-row Vars are involved, instead. We don't need to
handle ConvertRowtypeExprs in the child's tlists for now, so this commit
also removes the changes to the planner.
Previously, partitionwise join computed attr_needed data for each child
separately, and built the child join's tlist using that data, which also
required an extra step for adding PlaceHolderVars to that tlist, but it
would be more efficient to build it from the parent join's tlist through
the adjust_appendrel_attrs() transformation. So this commit builds that
list that way, and simplifies build_joinrel_tlist() and placeholder.c as
well as part of set_append_rel_size() to basically what they were before
partitionwise join went in.
Back-patch to PG11 where partitionwise join was introduced.
Report by Rajkumar Raghuwanshi. Analysis by Ashutosh Bapat, who also
provided some of regression tests. Patch by me, reviewed by Robert Haas.
Discussion: https://postgr.es/m/CAKcux6ktu-8tefLWtQuuZBYFaZA83vUzuRd7c1YHC-yEWyYFpg@mail.gmail.com
Commit aa09cd242 changed a condition in find_em_expr_for_rel from
being a bms_equal comparison of relids to bms_is_subset, in order to
support order by clauses on foreign joins. But this also allows
through the degenerate case of expressions with no Vars at all (and
hence empty relids), including integer constants which will be parsed
unexpectedly on the remote (viz. "ERROR: ORDER BY position 0 is not in
select list" as in the bug report).
Repair by adding an additional !bms_is_empty test.
Backpatch through to 9.6 where the aforementioned change was made.
Per bug #15352 from Maksym Boguk; analysis and patch by me.
Discussion: https://postgr.es/m/153518420278.1478.14875560810251994661@wrigleys.postgresql.org
Some data types under adt/ have separate header files, but most simple
ones do not, and their public functions are defined in builtins.h. As
the patches improving geometric types will require making additional
functions public, this seems like a good opportunity to create a header
for floats types.
Commit 1acf757255 made _cmp functions public to solve NaN issues locally
for GiST indexes. This patch reworks it in favour of a more widely
applicable API. The API uses inline functions, as they are easier to
use compared to macros, and avoid double-evaluation hazards.
Author: Emre Hasegeli
Reviewed-by: Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/CAE2gYzxF7-5djV6-cEvqQu-fNsnt%3DEqbOURx7ZDg%2BVv6ZMTWbg%40mail.gmail.com
Previously a lot of the error messages referenced the type in the
error message itself. That requires that the message is translated
separately for each type.
Note that currently a few smallint cases continue to reference the
integer, rather than smallint, type. A later patch will create a
separate routine for 16bit input.
Author: Andres Freund
Discussion: https://postgr.es/m/20180707200158.wpqkd7rjr4jxq5g7@alap3.anarazel.de
In final_cost_hashjoin(), commit 9c7f5229a allowed inner_unique cases
to follow a code path previously used only for SEMI/ANTI joins; but it
neglected to fix an if-test within that path that assumed SEMI and ANTI
were the only possible cases. This resulted in a wrong value for
hashjointuples, and an ensuing bad cost estimate, for inner_unique normal
joins. Fortunately, for inner_unique normal joins we can assume the number
of joined tuples is the same as for a SEMI join; so there's no need for
more code, we just have to invert the test to check for ANTI not SEMI.
It turns out that in two contrib tests in which commit 9c7f5229a
changed the plan expected for a query, the change was actually wrong
and induced by this estimation error, not by any real improvement.
Hence this patch also reverts those changes.
Per report from RK Korlapati. Backpatch to v10 where the error was
introduced.
David Rowley
Discussion: https://postgr.es/m/CA+SNy03bhq0fodsfOkeWDCreNjJVjsdHwUsb7AG=jpe0PtZc_g@mail.gmail.com
If a view references a foreign table, and the foreign table has a
BEFORE INSERT trigger, then it's possible for a tuple inserted or
updated through the view to be changed such that it violates the
view's WITH CHECK OPTION constraint.
Before this commit, postgres_fdw handled this case inconsistently. A
RETURNING clause on the INSERT or UPDATE statement targeting the view
would cause the finally-inserted tuple to be read back, and the WITH
CHECK OPTION violation would throw an error. But without a RETURNING
clause, postgres_fdw would not read the final tuple back, and WITH
CHECK OPTION would not throw an error for the violation (or may throw
an error when there is no real violation). AFTER ROW triggers on the
foreign table had a similar effect as a RETURNING clause on the INSERT
or UPDATE statement.
To fix, this commit retrieves the attributes needed to enforce the
WITH CHECK OPTION constraint along with the attributes needed for the
RETURNING clause (if any) from the remote side. Thus, the WITH CHECK
OPTION constraint is always evaluated against the final tuple after
any triggers on the remote side.
This fix may be considered inconsistent with CHECK constraints
declared on foreign tables, which are not enforced locally at all
(because the constraint is on a remote object). The discussion
concluded that this difference is reasonable, because the WITH CHECK
OPTION is a constraint on the local view (not any remote object);
therefore it only makes sense to enforce its WITH CHECK OPTION
constraint locally.
Author: Etsuro Fujita
Reviewed-by: Arthur Zakirov, Stephen Frost
Discussion: https://www.postgresql.org/message-id/7eb58fab-fd3b-781b-ac33-f7cfec96021f%40lab.ntt.co.jp
Deparsing logic in postgres_fdw for locking, FROM clause (alias) and Var
(column qualification) does not need to know the exact number of members
involved, which can be calculated with bms_num_members(), but just if
there is more than one relation involved, which is what bms_membership()
does. The latter is more performant than the former so this shaves a
couple of cycles.
Author: Daniel Gustafsson
Reviewed-by: Ashutosh Bapat, Nathan Bossart
Discussion: https://postgr.es/m/C73594E0-2B67-4E10-BB35-CDE0E41CC384@yesql.se
Print columns as "column C of <relation>" rather than "<relation> column
C". This seems to read noticeably better in English, as evidenced by the
regression test output changes, and the code change also makes it possible
for translators to adjust the phrase order in other languages.
Also change the output for OCLASS_DEFAULT from "default for %s" to
"default value for %s". This seems to read better and is also more
consistent with the output of, for instance, getObjectTypeDescription().
Kyotaro Horiguchi, per a complaint from me
Discussion: https://postgr.es/m/20180522.182020.114074746.horiguchi.kyotaro@lab.ntt.co.jp
Previously, we passed the toplevel PlannerInfo, but we actually want
to pass the relevant subroot. One problem with passing the toplevel
PlannerInfo is that the FDW which wants to push down an UPDATE or
DELETE against a join won't find the relevant joinrel there.
As of commit 1bc0100d27, postgres_fdw
tries to do exactly this and can be made to fail an assertion as a
result.
It's possible that this should be regarded as a bug fix and
back-patched to earlier releases, but for lack of a test case that
fails in earlier releases, no back-patch for now.
Etsuro Fujita, reviewed by Amit Langote.
Discussion: http://postgr.es/m/5AF43E02.30000@lab.ntt.co.jp
Without these fixes, changes to the inserted tuple made by remote
triggers are ignored when building local RETURNING tuples.
In the core code, call ExecInitRoutingInfo at a later point from
within ExecInitPartitionInfo so that the FDW callback gets invoked
after the returning list has been built. But move CheckValidResultRel
out of ExecInitRoutingInfo so that it can happen at an earlier stage.
In postgres_fdw, refactor assorted deparsing functions to work with
the RTE rather than the PlannerInfo, which saves us having to
construct a fake PlannerInfo in cases where we don't have a real one.
Then, we can pass down a constructed RTE that yields the correct
deparse result when no real one exists. Unfortunately, this
necessitates a hack that understands how the core code manages RT
indexes for update tuple routing, which is ugly, but we don't have a
better idea right now.
Original report, analysis, and patch by Etsuro Fujita. Heavily
refactored by me. Then worked over some more by Amit Langote.
Discussion: http://postgr.es/m/5AD4882B.10002@lab.ntt.co.jp
On further reflection, commit e5d83995e didn't go far enough: pretty much
everywhere in the planner that examines a clause's is_pushed_down flag
ought to be changed to use the more complicated behavior where we also
check the clause's required_relids. Otherwise we could make incorrect
decisions about whether, say, a clause is safe to use as a hash clause.
Some (many?) of these places are safe as-is, either because they are
never reached while considering a parameterized path, or because there
are additional checks that would reject a pushed-down clause anyway.
However, it seems smarter to just code them all the same way rather
than rely on easily-broken reasoning of that sort.
In support of that, invent a new macro RINFO_IS_PUSHED_DOWN that should
be used in place of direct tests on the is_pushed_down flag.
Like the previous patch, back-patch to all supported branches.
Discussion: https://postgr.es/m/f8128b11-c5bf-3539-48cd-234178b2314d@proxel.se
We've made multiple attempts to stabilize the plans shown by commit
1bc0100d2, with little success so far. The reason for the remaining
instability seems to be that if a transaction (such as auto-analyze)
is running concurrently with the test, then get_actual_variable_range may
return a maximum value for "T 1"."C 1" that's far away from the actual max,
as a result of our having transiently inserted such a value earlier in
the test. Because we use a non-MVCC snapshot to fetch the value (for
performance reasons), the presence of other transactions can cause that
function to return entries that are actually dead.
To fix, use a less extreme value in the earlier transient insertion, so
that whether it is visible or not won't affect the selectivity estimate.
The use of 9999 there seems to have been picked with the aid of a
dartboard anyway, rather than having a specific reason.
Discussion: https://postgr.es/m/16962.1523551784@sss.pgh.pa.us
Also enable this for postgres_fdw.
Etsuro Fujita, based on an earlier patch by Amit Langote. The larger
patch series of which this is a part has been reviewed by Amit
Langote, David Fetter, Maksim Milyutin, Álvaro Herrera, Stephen Frost,
and me. Minor documentation changes to the final version by me.
Discussion: http://postgr.es/m/29906a26-da12-8c86-4fb9-d8f88442f2b9@lab.ntt.co.jp
Etsuro Fujita. The larger patch series of which this is a part has
been reviewed by Amit Langote, David Fetter, Maksim Milyutin,
Álvaro Herrera, Stephen Frost, and me.
Discussion: http://postgr.es/m/5A95487E.9050808@lab.ntt.co.jp
We were being careless in some places about the order of -L switches in
link command lines, such that -L switches referring to external directories
could come before those referring to directories within the build tree.
This made it possible to accidentally link a system-supplied library, for
example /usr/lib/libpq.so, in place of the one built in the build tree.
Hilarity ensued, the more so the older the system-supplied library is.
To fix, break LDFLAGS into two parts, a sub-variable LDFLAGS_INTERNAL
and the main LDFLAGS variable, both of which are "recursively expanded"
so that they can be incrementally adjusted by different makefiles.
Establish a policy that -L switches for directories in the build tree
must always be added to LDFLAGS_INTERNAL, while -L switches for external
directories must always be added to LDFLAGS. This is sufficient to
ensure a safe search order. For simplicity, we typically also put -l
switches for the respective libraries into those same variables.
(Traditional make usage would have us put -l switches into LIBS, but
cleaning that up is a project for another day, as there's no clear
need for it.)
This turns out to also require separating SHLIB_LINK into two variables,
SHLIB_LINK and SHLIB_LINK_INTERNAL, with a similar rule about which
switches go into which variable. And likewise for PG_LIBS.
Although this change might appear to affect external users of pgxs.mk,
I think it doesn't; they shouldn't have any need to touch the _INTERNAL
variables.
In passing, tweak src/common/Makefile so that the value of CPPFLAGS
recorded in pg_config lacks "-DFRONTEND" and the recorded value of
LDFLAGS lacks "-L../../../src/common". Both of those things are
mistakes, apparently introduced during prior code rearrangements,
as old versions of pg_config don't print them. In general we don't
want anything that's specific to the src/common subdirectory to
appear in those outputs.
This is certainly a bug fix, but in view of the lack of field
complaints, I'm unsure whether it's worth the risk of back-patching.
In any case it seems wise to see what the buildfarm makes of it first.
Discussion: https://postgr.es/m/25214.1522604295@sss.pgh.pa.us
Since commit 7012b132d0, postgres_fdw
has been able to push down the toplevel aggregation operation to the
remote server. Commit e2f1eb0ee3 made
it possible to break down the toplevel aggregation into one
aggregate per partition. This commit lets postgres_fdw push down
aggregation in that case just as it does at the top level.
In order to make this work, this commit adds an additional argument
to the GetForeignUpperPaths FDW API. A matching argument is added
to the signature for create_upper_paths_hook. Third-party code using
either of these will need to be updated.
Also adjust create_foreignscan_plan() so that it picks up the correct
set of relids in this case.
Jeevan Chalke, reviewed by Ashutosh Bapat and by me and with some
adjustments by me. The larger patch series of which this patch is a
part was also reviewed and tested by Antonin Houska, Rajkumar
Raghuwanshi, David Rowley, Dilip Kumar, Konstantin Knizhnik, Pascal
Legrand, and Rafia Sabih.
Discussion: http://postgr.es/m/CAM2+6=V64_xhstVHie0Rz=KPEQnLJMZt_e314P0jaT_oJ9MR8A@mail.gmail.com
Discussion: http://postgr.es/m/CAM2+6=XPWujjmj5zUaBTGDoB38CemwcPmjkRy0qOcsQj_V+2sQ@mail.gmail.com
If the toplevel scan/join target list is parallel-safe, postpone
generating Gather (or Gather Merge) paths until after the toplevel has
been adjusted to return it. This (correctly) makes queries with
expensive functions in the target list more likely to choose a
parallel plan, since the cost of the plan now reflects the fact that
the evaluation will happen in the workers rather than the leader.
The original complaint about this problem was from Jeff Janes.
If the toplevel scan/join relation is partitioned, recursively apply
the changes to all partitions. This sometimes allows us to get rid of
Result nodes, because Append is not projection-capable but its
children may be. It also cleans up what appears to be incorrect SRF
handling from commit e2f1eb0ee30d144628ab523432320f174a2c8966: the old
code had no knowledge of SRFs for child scan/join rels.
Because we now use create_projection_path() in some cases where we
formerly used apply_projection_to_path(), this changes the ordering
of columns in some queries generated by postgres_fdw. Update
regression outputs accordingly.
Patch by me, reviewed by Amit Kapila and by Ashutosh Bapat. Other
fixes for this problem (substantially different from this version)
were reviewed by Dilip Kumar, Amit Khandekar, and Marina Polyakova.
Discussion: http://postgr.es/m/CAMkU=1ycXNipvhWuweUVpKuyu6SpNjF=yHWu4c4US5JgVGxtZQ@mail.gmail.com
Per the project style guide, details and hints should have leading
capitalization and end with a period. On the other hand, errcontext should
not be capitalized and should not end with a period. To support well
formatted error contexts in dblink, extend dblink_res_error() to take a
format+arguments rather than a hardcoded string.
Daniel Gustafsson
Discussion: https://postgr.es/m/B3C002C8-21A0-4F53-A06E-8CAB29FCF295@yesql.se
This reverts commit c2c537c56d.
It's now clear that whatever is going on there, it can't be blamed
on unexpected ANALYZE runs, because the statistics are the same
just before the failing query as they were at the start of the test.
It seems fairly hard to explain recent buildfarm failures without the
theory that something is doing an ANALYZE behind our backs. Probe
for this directly to see if it's true.
In principle the outputs of these queries should be stable, since the table
in question is small enough that ANALYZE's sample will include all rows.
But even if that turns out to be wrong, we can put up with some failures
for a bit. I don't intend to leave this here indefinitely.
Discussion: https://postgr.es/m/25502.1520277552@sss.pgh.pa.us
Commit 1bc0100d27 added this test, and
commits 882ea509fe,
958e20e42d,
4fa396464e tried to stabilize it. It's
still not stable, so keep trying.
The latest comment from Tom Lane is that disabling autovacuum seems
like a good strategy, but we might need to do it on more tables, hence
this patch.
Etsuro Fujita
Discussion: http://postgr.es/m/5A9928F1.2010206@lab.ntt.co.jp
Commit a26116c6c accidentally changed the behavior of the SQL format_type()
function while refactoring. For the reasons explained in that function's
comment, a NULL typemod argument should behave differently from a -1
argument. Since we've managed to break this, add a regression test
memorializing the intended behavior.
In passing, be consistent about the type of the "flags" parameter.
Noted by Rushabh Lathia, though I revised the patch some more.
Discussion: https://postgr.es/m/CAGPqQf3RB2q-d2Awp_-x-Ur6aOxTUwnApt-vm-iTtceZxYnePg@mail.gmail.com
Commit 1bc0100d27 added this test,
and commit 882ea509fe tried to
stabilize it. There were still failures, so commit
958e20e42d tried again to stabilize
it. That approach is still failing on jaguarundi, though, so
back it out and try something else. Specifically, instead of
disabling remote estimates for the table in question, let's tell
autovacuum to leave it alone.
Etsuro Fujita
Discussion: http://postgr.es/m/5A82DCCE.3060107@lab.ntt.co.jp
Introduce a new format_type_extended, with a flags bitmask argument that
can modify the default behavior. A few compatibility and readability
wrappers remain:
format_type_be
format_type_be_qualified
format_type_with_typemod
while format_type_with_typemod_qualified, which had a single caller, is
removed.
Author: Michael Paquier, some revisions by me
Discussion: 20180213035107.GA2915@paquier.xyz
The modern way is to use a missing_ok argument instead of two separate
almost-identical routines, so do that.
Author: Michaël Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20180201063212.GE6398@paquier.xyz
Even after commit 882ea509fe, some
buildfarm members are still failing in the postgres_fdw tests.
Try to fix that by disabling use of remote statistics for some
test cases.
Etsuro Fujita
Discussion: http://postgr.es/m/5A7D76CF.8080601@lab.ntt.co.jp
Commit 1bc0100d27 added these tests,
but they're not stable enough to survive in the buildfarm. Remove
CTIDs from the output in the hopes of fixing that.
Commit 0bf3ae88af allowed direct
foreign table modification; instead of fetching each row, updating
it locally, and then pushing the modification back to the remote
side, we would instead do all the work on the remote server via a
single remote UPDATE or DELETE command. However, that commit only
enabled this optimization when join tree consisted only of the
target table.
This change allows the same optimization when an UPDATE statement
has a FROM clause or a DELETE statement has a USING clause. This
works much like ordinary foreign join pushdown, in that the tables
must be on the same remote server, relevant parts of the query
must be pushdown-safe, and so forth.
Etsuro Fujita, reviewed by Ashutosh Bapat, Rushabh Lathia, and me.
Some formatting corrections by me.
Discussion: http://postgr.es/m/5A57193A.2080003@lab.ntt.co.jp
Discussion: http://postgr.es/m/b9cee735-62f8-6c07-7528-6364ce9347d0@lab.ntt.co.jp
Commit 4bbf6edfbd added a test case,
but it turns out that the test case doesn't reliably test for the
bug, and in the context of the regression test suite did not because
ANALYZE had not been run.
Report and patch by Etsuro Fujita. I added a comment along lines
previously suggested by Tom Lane.
Discussion: http://postgr.es/m/5A6195D8.8060206@lab.ntt.co.jp
When pushing down a join to a foreign server, postgres_fdw constructs
an alternative plan to be used for any EvalPlanQual rechecks that
prove to be necessary. This plan is stored as the outer subplan of
the Foreign Scan implementing the pushed-down join. Previously, this
alternative plan could have a different nominal sort ordering than its
parent, which seemed OK since there will only be one tuple per base
table anyway in the case of an EvalPlanQual recheck. Actually,
though, it caused a problem if that path was used as a building block
for the EvalPlanQual recheck plan of a higher-level foreign join,
because we could end up with a merge join one of whose inputs was not
labelled with the correct sort order. Repair by injecting an extra
Sort node into the EvalPlanQual recheck plan whenever it would
otherwise fail to be sorted at least as well as its parent Foreign
Scan.
Report by Jeff Janes. Patch by me, reviewed by Tom Lane, who also
provided the test case and comment text.
Discussion: http://postgr.es/m/CAMkU=1y2G8VOVBHv3iXU2TMAj7-RyBFFW1uhkr5sm9LQ2=X35g@mail.gmail.com
Commit 7012b132d, which added the ability to push down aggregates and
grouping to the remote server, wasn't careful to ensure that the remote
server would have the same idea we do about which columns are the grouping
columns, in cases where there are textually identical GROUP BY expressions.
Such cases typically led to "targetlist item has multiple sortgroupref
labels" errors.
To fix this reliably, switch over to using "GROUP BY column-number" syntax
rather than "GROUP BY expression" in transmitted queries, and adjust
foreign_grouping_ok() to be more careful about duplicating the sortgroupref
labeling of the local pathtarget.
Per bug #14890 from Sean Johnston. Back-patch to v10 where the buggy code
was introduced.
Jeevan Chalke, reviewed by Ashutosh Bapat
Discussion: https://postgr.es/m/20171107134948.1508.94783@wrigleys.postgresql.org
This is a backward incompatibility which should be noted in the
release notes for PostgreSQL 11.
For security reasons, we require that a postgres_fdw foreign table use
password authentication when accessing a remote server, so that an
unprivileged user cannot usurp the server's credentials. Superusers
are exempt from this requirement, because we assume they are entitled
to usurp the server's credentials or, at least, can find some other
way to do it.
But what should happen when the foreign table is accessed by a view
owned by a user different from the session user? Is it the view owner
that must be a superuser in order to avoid the requirement of using a
password, or the session user? Historically it was the latter, but
this requirement makes it the former instead. This allows superusers
to delegate to other users the right to select from a foreign table
that doesn't use password authentication by creating a view over the
foreign table and handing out rights to the view. It is also more
consistent with the idea that access to a view should use the view
owner's privileges rather than the session user's privileges.
The upshot of this change is that a superuser selecting from a view
created by a non-superuser may now get an error complaining that no
password was used, while a non-superuser selecting from a view
created by a superuser will no longer receive such an error.
No documentation changes are present in this patch because the
wording of the documentation already suggests that it works this
way. We should perhaps adjust the documentation in the back-branches,
but that's a task for another patch.
Originally proposed by Jeff Janes, but with different semantics;
adjusted to work like this by me per discussion.
Discussion: http://postgr.es/m/CA+TgmoaY4HsVZJv5SqEjCKLDwtCTSwXzKpRftgj50wmMMBwciA@mail.gmail.com
Antonin Houska reported that the planner does consider pushing
postgres_fdw_abs() to the remote side, which happens because we make
it shippable earlier in the test case file.
Jeevan Chalke provided this patch, which changes the join
condition to use random(), which is not shippable, instead.
Antonin reviewed the patch.
Discussion: http://postgr.es/m/15265.1511985971@localhost
rewriteTargetListUD's processing is dependent on the relkind of the query's
target table. That was fine at the time it was made to act that way, even
for queries on inheritance trees, because all tables in an inheritance tree
would necessarily be plain tables. However, the 9.5 feature addition
allowing some members of an inheritance tree to be foreign tables broke the
assumption that rewriteTargetListUD's output tlist could be applied to all
child tables with nothing more than column-number mapping. This led to
visible failures if foreign child tables had row-level triggers, and would
also break in cases where child tables belonged to FDWs that used methods
other than CTID for row identification.
To fix, delay running rewriteTargetListUD until after the planner has
expanded inheritance, so that it is applied separately to the (already
mapped) tlist for each child table. We can conveniently call it from
preprocess_targetlist. Refactor associated code slightly to avoid the
need to heap_open the target relation multiple times during
preprocess_targetlist. (The APIs remain a bit ugly, particularly around
the point of which steps scribble on parse->targetList and which don't.
But avoiding such scribbling would require a change in FDW callback APIs,
which is more pain than it's worth.)
Also fix ExecModifyTable to ensure that "tupleid" is reset to NULL when
we transition from rows providing a CTID to rows that don't. (That's
really an independent bug, but it manifests in much the same cases.)
Add a regression test checking one manifestation of this problem, which
was that row-level triggers on a foreign child table did not work right.
Back-patch to 9.5 where the problem was introduced.
Etsuro Fujita, reviewed by Ildus Kurbangaliev and Ashutosh Bapat
Discussion: https://postgr.es/m/20170514150525.0346ba72@postgrespro.ru
Instead of joining two partitioned tables in their entirety we can, if
it is an equi-join on the partition keys, join the matching partitions
individually. This involves teaching the planner about "other join"
rels, which are related to regular join rels in the same way that
other member rels are related to baserels. This can use significantly
more CPU time and memory than regular join planning, because there may
now be a set of "other" rels not only for every base relation but also
for every join relation. In most practical cases, this probably
shouldn't be a problem, because (1) it's probably unusual to join many
tables each with many partitions using the partition keys for all
joins and (2) if you do that scenario then you probably have a big
enough machine to handle the increased memory cost of planning and (3)
the resulting plan is highly likely to be better, so what you spend in
planning you'll make up on the execution side. All the same, for now,
turn this feature off by default.
Currently, we can only perform joins between two tables whose
partitioning schemes are absolutely identical. It would be nice to
cope with other scenarios, such as extra partitions on one side or the
other with no match on the other side, but that will have to wait for
a future patch.
Ashutosh Bapat, reviewed and tested by Rajkumar Raghuwanshi, Amit
Langote, Rafia Sabih, Thomas Munro, Dilip Kumar, Antonin Houska, Amit
Khandekar, and by me. A few final adjustments by me.
Discussion: http://postgr.es/m/CAFjFpRfQ8GrQvzp3jA2wnLqrHmaXna-urjm_UY9BqXj=EaDTSA@mail.gmail.com
Discussion: http://postgr.es/m/CAFjFpRcitjfrULr5jfuKWRPsGUX0LQ0k8-yG0Qw2+1LBGNpMdw@mail.gmail.com
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
David Rowley
Etsuro Fujita
Tom Lane
Michael Paquier
Amit Kapila
Andres Freund
Peter Eisentraut
Alvaro Herrera
Heikki Linnakangas
Bruce Momjian
Thomas Munro
Andrew Gierth
Tomas Vondra
Jeff Davis
Andrew Dunstan
Robert Haas
Peter Eisentraut