Historically, the code to build relation options has been shaped the
same way in multiple code paths by using a set of datums in input with
the options parsed with a static table which is then filled with the
option values. This introduces a new common routine in reloptions.c to
do most of the legwork for the in-core code paths.
Author: Amit Langote
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CA+HiwqGsoSn_uTPPYT19WrtR7oYpYtv4CdS0xuedTKiHHWuk_g@mail.gmail.com
This feature was using a process local map to track the first few blocks
in the relation. The map was reset each time we get the block with enough
freespace. It was discussed that it would be better to track this map on
a per-relation basis in relcache and then invalidate the same whenever
vacuum frees up some space in the page or when FSM is created. The new
design would be better both in terms of API design and performance.
List of commits reverted, in reverse chronological order:
06c8a5090e Improve code comments in b0eaa4c51b.
13e8643bfc During pg_upgrade, conditionally skip transfer of FSMs.
6f918159a9 Add more tests for FSM.
9c32e4c350 Clear the local map when not used.
29d108cdec Update the documentation for FSM behavior..
08ecdfe7e5 Make FSM test portable.
b0eaa4c51b Avoid creation of the free space map for small heap relations.
Discussion: https://postgr.es/m/20190416180452.3pm6uegx54iitbt5@alap3.anarazel.de
This uses the progress reporting infrastructure added by c16dc1aca5,
adding support for CREATE INDEX and CREATE INDEX CONCURRENTLY.
There are two pieces to this: one is index-AM-agnostic, and the other is
AM-specific. The latter is fairly elaborate for btrees, including
reportage for parallel index builds and the separate phases that btree
index creation uses; other index AMs, which are much simpler in their
building procedures, have simplistic reporting only, but that seems
sufficient, at least for non-concurrent builds.
The index-AM-agnostic part is fairly complete, providing insight into
the CONCURRENTLY wait phases as well as block-based progress during the
index validation table scan. (The index validation index scan requires
patching each AM, which has not been included here.)
Reviewers: Rahila Syed, Pavan Deolasee, Tatsuro Yamada
Discussion: https://postgr.es/m/20181220220022.mg63bhk26zdpvmcj@alvherre.pgsql
To support building indexes over tables of different AMs, the scans to
do so need to be routed through the table AM. While moving a fair
amount of code, nearly all the changes are just moving code to below a
callback.
Currently the range based interface wouldn't make much sense for non
block based table AMs. But that seems aceptable for now.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Previously, all heaps had FSMs. For very small tables, this means that the
FSM took up more space than the heap did. This is wasteful, so now we
refrain from creating the FSM for heaps with 4 pages or fewer. If the last
known target block has insufficient space, we still try to insert into some
other page before giving up and extending the relation, since doing
otherwise leads to table bloat. Testing showed that trying every page
penalized performance slightly, so we compromise and try every other page.
This way, we visit at most two pages. Any pages with wasted free space
become visible at next relation extension, so we still control table bloat.
As a bonus, directly attempting one or two pages can even be faster than
consulting the FSM would have been.
Once the FSM is created for a heap we don't remove it even if somebody
deletes all the rows from the corresponding relation. We don't think it is
a useful optimization as it is quite likely that relation will again grow
to the same size.
Author: John Naylor, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Mithun C Y
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
Previously, all heaps had FSMs. For very small tables, this means that the
FSM took up more space than the heap did. This is wasteful, so now we
refrain from creating the FSM for heaps with 4 pages or fewer. If the last
known target block has insufficient space, we still try to insert into some
other page before giving up and extending the relation, since doing
otherwise leads to table bloat. Testing showed that trying every page
penalized performance slightly, so we compromise and try every other page.
This way, we visit at most two pages. Any pages with wasted free space
become visible at next relation extension, so we still control table bloat.
As a bonus, directly attempting one or two pages can even be faster than
consulting the FSM would have been.
Once the FSM is created for a heap we don't remove it even if somebody
deletes all the rows from the corresponding relation. We don't think it is
a useful optimization as it is quite likely that relation will again grow
to the same size.
Author: John Naylor with design inputs and some code contribution by Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Mithun C Y
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
heapam.h previously was included in a number of widely used
headers (e.g. execnodes.h, indirectly in executor.h, ...). That's
problematic on its own, as heapam.h contains a lot of low-level
details that don't need to be exposed that widely, but becomes more
problematic with the upcoming introduction of pluggable table storage
- it seems inappropriate for heapam.h to be included that widely
afterwards.
heapam.h was largely only included in other headers to get the
HeapScanDesc typedef (which was defined in heapam.h, even though
HeapScanDescData is defined in relscan.h). The better solution here
seems to be to just use the underlying struct (forward declared where
necessary). Similar for BulkInsertState.
Another problem was that LockTupleMode was used in executor.h - parts
of the file tried to cope without heapam.h, but due to the fact that
it indirectly included it, several subsequent violations of that goal
were not not noticed. We could just reuse the approach of declaring
parameters as int, but it seems nicer to move LockTupleMode to
lockoptions.h - that's not a perfect location, but also doesn't seem
bad.
As a number of files relied on implicitly included heapam.h, a
significant number of files grew an explicit include. It's quite
probably that a few external projects will need to do the same.
Author: Andres Freund
Reviewed-By: Alvaro Herrera
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
They already fail anyway, but prior to this patch they raise an ugly
error message about a lock that cannot be acquired. This just improves
the message.
Author: Masahiko Sawada
Reported-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoBZau4g4_NUf3BKNd=CdYK+xaPdtJCzvOC1TxGdTiJx_Q@mail.gmail.com
Reviewed-by: Kuntal Ghosh, Alexander Korotkov, Simon Riggs, Michaël Paquier, Álvaro Herrera
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
BRIN indexes like to propagate additions of free space into the upper pages
of their free space maps as soon as the new space is known, even when it's
just on one individual index page. Previously this required calling
FreeSpaceMapVacuum, which is quite an expensive thing if the map is large.
Use the FreeSpaceMapVacuumRange function recently added by commit c79f6df75
to reduce the amount of work done for this purpose.
Fix a couple of places that neglected to do the upper-page vacuuming at all
after recording new free space. If the policy is to be that BRIN should do
that, it should do it everywhere.
Do RecordPageWithFreeSpace unconditionally in brin_page_cleanup, and do
FreeSpaceMapVacuum unconditionally in brin_vacuum_scan. Because of the
FSM's imprecise storage of free space, the old complications here seldom
bought anything, they just slowed things down. This approach also
provides a predictable path for FSM corruption to be repaired.
Remove premature RecordPageWithFreeSpace call in brin_getinsertbuffer
where it's about to return an extended page to the caller. The caller
should do that, instead, after it's inserted its new tuple. Fix the
one caller that forgot to do so.
Simplify logic in brin_doupdate's same-page-update case by postponing
brin_initialize_empty_new_buffer to after the critical section; I see
little point in doing it before.
Avoid repeat calls of RelationGetNumberOfBlocks in brin_vacuum_scan.
Avoid duplicate BufferGetBlockNumber and BufferGetPage calls in
a couple of places where we already had the right values.
Move a BRIN_elog debug logging call out of a critical section; that's
pretty unsafe and I don't think it buys us anything to not wait till
after the critical section.
Move the "*extended = false" step in brin_getinsertbuffer into the
routine's main loop. There's no actual bug there, since the loop can't
iterate with *extended still true, but it doesn't seem very future-proof
as coded; and it's certainly not documented as a loop invariant.
This is all from follow-on investigation inspired by commit c79f6df75.
Discussion: https://postgr.es/m/5801.1522429460@sss.pgh.pa.us
Autovacuum's 'workitem' request queue is of limited size, so requests
can fail if they arrive more quickly than autovacuum can process them.
Emit a log message when this happens, to provide better visibility of
this.
Backpatch to 10. While this represents an API change for
AutoVacuumRequestWork, that function is not yet prepared to deal with
external modules calling it, so there doesn't seem to be any risk (other
than log spam, that is.)
Author: Masahiko Sawada
Reviewed-by: Fabrízio Mello, Ildar Musin, Álvaro Herrera
Discussion: https://postgr.es/m/CAD21AoB1HrQhp6_4rTyHN5kWEJCEsG8YzsjZNt-ctoXSn5Uisw@mail.gmail.com
To make this work, tuplesort.c and logtape.c must also support
parallelism, so this patch adds that infrastructure and then applies
it to the particular case of parallel btree index builds. Testing
to date shows that this can often be 2-3x faster than a serial
index build.
The model for deciding how many workers to use is fairly primitive
at present, but it's better than not having the feature. We can
refine it as we get more experience.
Peter Geoghegan with some help from Rushabh Lathia. While Heikki
Linnakangas is not an author of this patch, he wrote other patches
without which this feature would not have been possible, and
therefore the release notes should possibly credit him as an author
of this feature. Reviewed by Claudio Freire, Heikki Linnakangas,
Thomas Munro, Tels, Amit Kapila, me.
Discussion: http://postgr.es/m/CAM3SWZQKM=Pzc=CAHzRixKjp2eO5Q0Jg1SoFQqeXFQ647JiwqQ@mail.gmail.com
Discussion: http://postgr.es/m/CAH2-Wz=AxWqDoVvGU7dq856S4r6sJAj6DBn7VMtigkB33N5eyg@mail.gmail.com
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The previous commit contained a thinko that made a single-range
summarization request process from there to end of table. Fix by
setting the correct end range point. Per buildfarm.
If a process is extending a table concurrently with some BRIN
summarization process, it is possible for the latter to miss pages added
by the former because the number of pages is computed ahead of time.
Fix by determining a fresh relation size after inserting the placeholder
tuple: any process that further extends the table concurrently will
update the placeholder tuple, while previous pages will be processed by
the heap scan.
Reported-by: Tomas Vondra
Reviewed-by: Tom Lane
Author: Álvaro Herrera
Discussion: https://postgr.es/m/083d996a-4a8a-0e13-800a-851dd09ad8cc@2ndquadrant.com
Backpatch-to: 9.5
Previously, these index types left the pd_lower field set to the default
SizeOfPageHeaderData, which is really a lie because it ought to point past
whatever space is being used for metadata. The coding accidentally failed
to fail because we never told xlog.c that the metapage is of standard
format --- but that's not very good, because it impedes WAL consistency
checking, and in some cases prevents compression of full-page images.
To fix, ensure that we set pd_lower correctly, not only when creating a
metapage but whenever we write it out (these apparently redundant steps are
needed to cope with pg_upgrade'd indexes that don't yet contain the right
value). This allows telling xlog.c that the page is of standard format.
The WAL consistency check mask functions are made to mask only if pd_lower
appears valid, which I think is likely unnecessary complication, since
any metapage appearing in a v11 WAL stream should contain valid pd_lower.
But it doesn't cost much to be paranoid.
Amit Langote, reviewed by Michael Paquier and Amit Kapila
Discussion: https://postgr.es/m/0d273805-0e9e-ec1a-cb84-d4da400b8f85@lab.ntt.co.jp
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund
Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Instead of allocating memory in brin_deform_tuple and brin_copy_tuple
over and over during a scan, allow reuse of previously allocated memory.
This is said to make for a measurable performance improvement.
Author: Jinyu Zhang, Álvaro Herrera
Reviewed by: Tomas Vondra
Discussion: https://postgr.es/m/495deb78.4186.1500dacaa63.Coremail.beijing_pg@163.com
The original code was overly optimistic about the cost of scanning a
BRIN index, leading to BRIN indexes being selected when they'd be a
worse choice than some other index. This complete rewrite should be
more accurate.
Author: David Rowley, based on an earlier patch by Emre Hasegeli
Reviewed-by: Emre Hasegeli
Discussion: https://postgr.es/m/CAKJS1f9n-Wapop5Xz1dtGdpdqmzeGqQK4sV2MK-zZugfC14Xtw@mail.gmail.com
When the BRIN summary tuple for a page range becomes too "wide" for the
values actually stored in the table (because the tuples that were
present originally are no longer present due to updates or deletes), it
can be useful to remove the outdated summary tuple, so that a future
summarization can install a tighter summary.
This commit introduces a SQL-callable interface to do so.
Author: Álvaro Herrera
Reviewed-by: Eiji Seki
Discussion: https://postgr.es/m/20170228045643.n2ri74ara4fhhfxf@alvherre.pgsql
Previously, only VACUUM would cause a page range to get initially
summarized by BRIN indexes, which for some use cases takes too much time
since the inserts occur. To avoid the delay, have brininsert request a
summarization run for the previous range as soon as the first tuple is
inserted into the first page of the next range. Autovacuum is in charge
of processing these requests, after doing all the regular vacuuming/
analyzing work on tables.
This doesn't impose any new tasks on autovacuum, because autovacuum was
already in charge of doing summarizations. The only actual effect is to
change the timing, i.e. that it occurs earlier. For this reason, we
don't go any great lengths to record these requests very robustly; if
they are lost because of a server crash or restart, they will happen at
a later time anyway.
Most of the new code here is in autovacuum, which can now be told about
"work items" to process. This can be used for other things such as GIN
pending list cleaning, perhaps visibility map bit setting, both of which
are currently invoked during vacuum, but do not really depend on vacuum
taking place.
The requests are at the page range level, a granularity for which we did
not have SQL-level access; we only had index-level summarization
requests via brin_summarize_new_values(). It seems reasonable to add
SQL-level access to range-level summarization too, so add a function
brin_summarize_range() to do that.
Authors: Álvaro Herrera, based on sketch from Simon Riggs.
Reviewed-by: Thomas Munro.
Discussion: https://postgr.es/m/20170301045823.vneqdqkmsd4as4ds@alvherre.pgsql
In combination with 569174f1be, which
taught the btree AM how to perform parallel index scans, this allows
parallel index scan plans on btree indexes. This infrastructure
should be general enough to support parallel index scans for other
index AMs as well, if someone updates them to support parallel
scans.
Amit Kapila, reviewed and tested by Anastasia Lubennikova, Tushar
Ahuja, and Haribabu Kommi, and me.
It's always been possible for index AMs to cache data across successive
amgettuple calls within a single SQL command: the IndexScanDesc.opaque
field is meant for precisely that. However, no comparable facility
exists for amortizing setup work across successive aminsert calls.
This patch adds such a feature and teaches GIN, GIST, and BRIN to use it
to amortize catalog lookups they'd previously been doing on every call.
(The other standard index AMs keep everything they need in the relcache,
so there's little to improve there.)
For GIN, the overall improvement in a statement that inserts many rows
can be as much as 10%, though it seems a bit less for the other two.
In addition, this makes a really significant difference in runtime
for CLOBBER_CACHE_ALWAYS tests, since in those builds the repeated
catalog lookups are vastly more expensive.
The reason this has been hard up to now is that the aminsert function is
not passed any useful place to cache per-statement data. What I chose to
do is to add suitable fields to struct IndexInfo and pass that to aminsert.
That's not widening the index AM API very much because IndexInfo is already
within the ken of ambuild; in fact, by passing the same info to aminsert
as to ambuild, this is really removing an inconsistency in the AM API.
Discussion: https://postgr.es/m/27568.1486508680@sss.pgh.pa.us
This patch doesn't actually make any index AM parallel-aware, but it
provides the necessary functions at the AM layer to do so.
Rahila Syed, Amit Kapila, Robert Haas
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
Per discussion, we should provide such functions to replace the lost
ability to discover AM properties by inspecting pg_am (cf commit
65c5fcd35). The added functionality is also meant to displace any code
that was looking directly at pg_index.indoption, since we'd rather not
believe that the bit meanings in that field are part of any client API
contract.
As future-proofing, define the SQL API to not assume that properties that
are currently AM-wide or index-wide will remain so unless they logically
must be; instead, expose them only when inquiring about a specific index
or even specific index column. Also provide the ability for an index
AM to override the behavior.
In passing, document pg_am.amtype, overlooked in commit 473b93287.
Andrew Gierth, with kibitzing by me and others
Discussion: <87mvl5on7n.fsf@news-spur.riddles.org.uk>
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
brin_summarize_new_values() did not check that the passed OID was for
an index at all, much less that it was a BRIN index, and would fail in
obscure ways if it wasn't (possibly damaging data first?). It also
lacked any permissions test; by analogy to VACUUM, we should only allow
the table's owner to summarize.
Noted by Jeff Janes, fix by Michael Paquier and me
If the number of heap blocks is not multiples of pages per range, the
summarizing produces wrong summary information for the last brin index
tuple while vacuuming.
Problem reported by Tatsuo Ishii and fixed by Amit Langote.
Discussion at "[HACKERS] BRIN INDEX value (message id :20150903.174935.1946402199422994347.t-ishii@sraoss.co.jp)
Backpatched to 9.5 in which brin index was added.
In some corner cases, it is possible for the BRIN index relation to be
extended by brin_getinsertbuffer but the new page not be used
immediately for anything by its callers; when this happens, the page is
initialized and the FSM is updated (by brin_getinsertbuffer) with the
info about that page, but these actions are not WAL-logged. A later
index insert/update can use the page, but since the page is already
initialized, the initialization itself is not WAL-logged then either.
Replay of this sequence of events causes recovery to fail altogether.
There is a related corner case within brin_getinsertbuffer itself, in
which we extend the relation to put a new index tuple there, but later
find out that we cannot do so, and do not return the buffer; the page
obtained from extension is not even initialized. The resulting page is
lost forever.
To fix, shuffle the code so that initialization is not the
responsibility of brin_getinsertbuffer anymore, in normal cases;
instead, the initialization is done by its callers (brin_doinsert and
brin_doupdate) once they're certain that the page is going to be used.
When either those functions determine that the new page cannot be used,
before bailing out they initialize the page as an empty regular page,
enter it in FSM and WAL-log all this. This way, the page is usable for
future index insertions, and WAL replay doesn't find trying to insert
tuples in pages whose initialization didn't make it to the WAL. The
same strategy is used in brin_getinsertbuffer when it cannot return the
new page.
Additionally, add a new step to vacuuming so that all pages of the index
are scanned; whenever an uninitialized page is found, it is initialized
as empty and WAL-logged. This closes the hole that the relation is
extended but the system crashes before anything is WAL-logged about it.
We also take this opportunity to update the FSM, in case it has gotten
out of date.
Thanks to Heikki Linnakangas for finding the problem that kicked some
additional analysis of BRIN page assignment code.
Backpatch to 9.5, where BRIN was introduced.
Discussion: https://www.postgresql.org/message-id/20150723204810.GY5596@postgresql.org
For correctness of summarization results, it is critical that the
snapshot used during the summarization scan is able to see all tuples
that are live to all transactions -- including tuples inserted or
deleted by in-progress transactions. Otherwise, it would be possible
for a transaction to insert a tuple, then idle for a long time while a
concurrent transaction executes summarization of the range: this would
result in the inserted value not being considered in the summary.
Previously we were trying to use a MVCC snapshot in conjunction with
adding a "placeholder" tuple in the index: the snapshot would see all
committed tuples, and the placeholder tuple would catch insertions by
any new inserters. The hole is that prior insertions by transactions
that are still in progress by the time the MVCC snapshot was taken were
ignored.
Kevin Grittner reported this as a bogus error message during vacuum with
default transaction isolation mode set to repeatable read (because the
error report mentioned a function name not being invoked during), but
the problem is larger than that.
To fix, tweak IndexBuildHeapRangeScan to have a new mode that behaves
the way we need using SnapshotAny visibility rules. This change
simplifies the BRIN code a bit, mainly by removing large comments that
were mistaken. Instead, rely on the SnapshotAny semantics to provide
what it needs. (The business about a placeholder tuple needs to remain:
that covers the case that a transaction inserts a a tuple in a page that
summarization already scanned.)
Discussion: https://www.postgresql.org/message-id/20150731175700.GX2441@postgresql.org
In passing, remove a couple of unused declarations from brin.h and
reword a comment to be proper English. This part submitted by Kevin
Grittner.
Backpatch to 9.5, where BRIN was introduced.
Michael Paquier
Tom Lane
Amit Kapila
Alvaro Herrera
Andres Freund
Bruce Momjian
Teodor Sigaev
Robert Haas
Peter Eisentraut
Kevin Grittner
Tatsuo Ishii