walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
Per bug #5988, reported by Marko Tiikkaja, and further analyzed by Tom
Lane, the previous coding was broken in several respects: even if the
target table already existed, a subsequent CREATE TABLE IF NOT EXISTS
might try to add additional constraints or sequences-for-serial
specified in the new CREATE TABLE statement.
In passing, this also fixes a minor information leak: it's no longer
possible to figure out whether a schema to which you don't have CREATE
access contains a sequence named like "x_y_seq" by attempting to create a
table in that schema called "x" with a serial column called "y".
Some more refactoring of this code in the future might be warranted,
but that will need to wait for a later major release.
There can never be a need to push the indcheckxmin horizon forward, since
any HOT chains that are actually broken with respect to the index must
pre-date its original creation. So we can just avoid changing pg_index
altogether during a REINDEX operation.
This offers a cleaner solution than my previous patch for the problem
found a few days ago that we mustn't try to update pg_index while we are
reindexing it. System catalog indexes will always be created with
indcheckxmin = false during initdb, and with this modified code we should
never try to change their pg_index entries. This avoids special-casing
system catalogs as the former patch did, and should provide a performance
benefit for many cases where REINDEX formerly caused an index to be
considered unusable for a short time.
Back-patch to 8.3 to cover all versions containing HOT. Note that this
patch changes the API for index_build(), but I believe it is unlikely that
any add-on code is calling that directly.
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
Since the code underlying pg_get_expr() is not secure against malformed
input, and can't practically be made so, we need to prevent miscreants
from feeding arbitrary data to it. We can do this securely by declaring
pg_get_expr() to take a new datatype "pg_node_tree" and declaring the
system catalog columns that hold nodeToString output to be of that type.
There is no way at SQL level to create a non-null value of type pg_node_tree.
Since the backend-internal operations that fill those catalog columns
operate below the SQL level, they are oblivious to the datatype relabeling
and don't need any changes.
those process types that go through InitPostgres; in particular, bootstrap
and standalone-backend cases. This ensures that we have set up a PGPROC
and done some other basic initialization steps (corresponding to the
if (IsUnderPostmaster) block in AuxiliaryProcessMain) before we attempt to
run WAL recovery in a standalone backend. As was discovered last September,
this is necessary for some corner-case code paths during WAL recovery,
particularly end-of-WAL cleanup.
Moving the bootstrap case here too is not necessary for correctness, but it
seems like a good idea since it reduces the number of distinct code paths.
of shared or nailed system catalogs. This has two key benefits:
* The new CLUSTER-based VACUUM FULL can be applied safely to all catalogs.
* We no longer have to use an unsafe reindex-in-place approach for reindexing
shared catalogs.
CLUSTER on nailed catalogs now works too, although I left it disabled on
shared catalogs because the resulting pg_index.indisclustered update would
only be visible in one database.
Since reindexing shared system catalogs is now fully transactional and
crash-safe, the former special cases in REINDEX behavior have been removed;
shared catalogs are treated the same as non-shared.
This commit does not do anything about the recently-discussed problem of
deadlocks between VACUUM FULL/CLUSTER on a system catalog and other
concurrent queries; will address that in a separate patch. As a stopgap,
parallel_schedule has been tweaked to run vacuum.sql by itself, to avoid
such failures during the regression tests.
Attributes can now have options, just as relations and tablespaces do, and
the reloptions code is used to parse, validate, and store them. For
simplicity and because these options are not performance critical, we store
them in a separate cache rather than the main relcache.
Thanks to Alex Hunsaker for the review.
walreceiver as whole into a dynamically loaded module, split the
libpq-specific parts of it into dynamically loaded module and keep the rest
in the main backend binary.
Although Tom fixed the Windows compilation problems with the old walreceiver
module already, this is a cleaner division of labour and makes the code
more readable. There's also the prospect of adding new transport methods
as pluggable modules in the future, which this patch makes easier, though for
now the API between libpqwalreceiver and walreceiver process should be
considered private.
The libpq-specific module is now in src/backend/replication/libpqwalreceiver,
and the part linked with postgres binary is in
src/backend/replication/walreceiver.c.
This includes two new kinds of postmaster processes, walsenders and
walreceiver. Walreceiver is responsible for connecting to the primary server
and streaming WAL to disk, while walsender runs in the primary server and
streams WAL from disk to the client.
Documentation still needs work, but the basics are there. We will probably
pull the replication section to a new chapter later on, as well as the
sections describing file-based replication. But let's do that as a separate
patch, so that it's easier to see what has been added/changed. This patch
also adds a new section to the chapter about FE/BE protocol, documenting the
protocol used by walsender/walreceivxer.
Bump catalog version because of two new functions,
pg_last_xlog_receive_location() and pg_last_xlog_replay_location(), for
monitoring the progress of replication.
Fujii Masao, with additional hacking by me
Index expression columns are now named after the FigureColname result for
their expressions, rather than always being "pg_expression_N". Digits are
appended to this name if needed to make the column name unique within the
index. (That happens for regular columns too, thus fixing the old problem
that CREATE INDEX fooi ON foo (f1, f1) fails. Before exclusion indexes
there was no real reason to do such a thing, but now maybe there is.)
Default names for indexes and associated constraints now include the column
names of all their columns, not only the first one as in previous practice.
(Of course, this will be truncated as needed to fit in NAMEDATALEN. Also,
pkey indexes retain the historical behavior of not naming specific columns
at all.)
An example of the results:
regression=# create table foo (f1 int, f2 text,
regression(# exclude (f1 with =, lower(f2) with =));
NOTICE: CREATE TABLE / EXCLUDE will create implicit index "foo_f1_lower_exclusion" for table "foo"
CREATE TABLE
regression=# \d foo_f1_lower_exclusion
Index "public.foo_f1_lower_exclusion"
Column | Type | Definition
--------+---------+------------
f1 | integer | f1
lower | text | lower(f2)
btree, for table "public.foo"
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Petr Jelinek
the strings seen during the bootstrap run. There might have been some
actual point to doing that, many years ago, but as far as I can see the only
value now is to conserve a bit of memory. Even if we cared about wasting
a megabyte or so during the initdb run, it'd be far more effective to
arrange to release memory at the end of each BKI command, instead of
intentionally hanging onto strings that might never be used again.
Not maintaining the table probably makes it faster too; but the main point
of this patch is to get rid of a couple hundred lines of unnecessary and
rather crufty code.
hand-assigned rowtype OIDs, even when they are not "bootstrapped" catalogs
that have handmade type rows in pg_type.h. Give pg_database such an OID.
Restore the availability of C macros for the rowtype OIDs of the bootstrapped
catalogs. (These macros are now in the individual catalogs' .h files,
though, not in pg_type.h.)
This commit doesn't do anything especially useful by itself, but it's
necessary infrastructure for reverting some ill-considered changes in
relcache.c.
source directory even for out-of-tree builds. They are now alsl built in
the build tree. This should be more convenient for certain developers'
workflows, and shouldn't really break anything else.
This patch gets us out from under the Unix limitation of two user-defined
signal types. We already had done something similar for signals directed to
the postmaster process; this adds multiplexing for signals directed to
backends and auxiliary processes (so long as they're connected to shared
memory).
As proof of concept, replace the former usage of SIGUSR1 and SIGUSR2
for backends with use of the multiplexing mechanism. There are still some
hard-wired definitions of SIGUSR1 and SIGUSR2 for other process types,
but getting rid of those doesn't seem interesting at the moment.
Fujii Masao
The current implementation fires an AFTER ROW trigger for each tuple that
looks like it might be non-unique according to the index contents at the
time of insertion. This works well as long as there aren't many conflicts,
but won't scale to massive unique-key reassignments. Improving that case
is a TODO item.
Dean Rasheed
its usual buffer cleaning duties during archive recovery, and it's responsible
for performing restartpoints.
This requires some changes in postmaster. When the startup process has done
all the initialization and is ready to start WAL redo, it signals the
postmaster to launch the background writer. The postmaster is signaled again
when the point in recovery is reached where we know that the database is in
consistent state. Postmaster isn't interested in that at the moment, but
that's the point where we could let other backends in to perform read-only
queries. The postmaster is signaled third time when the recovery has ended,
so that postmaster knows that it's safe to start accepting connections.
The startup process now traps SIGTERM, and performs a "clean" shutdown. If
you do a fast shutdown during recovery, a shutdown restartpoint is performed,
like a shutdown checkpoint, and postmaster kills the processes cleanly. You
still have to continue the recovery at next startup, though.
Currently, the background writer is only launched during archive recovery.
We could launch it during crash recovery as well, but it seems better to keep
that codepath as simple as possible, for the sake of robustness. And it
couldn't do any restartpoints during crash recovery anyway, so it wouldn't be
that useful.
log_restartpoints is gone. Use log_checkpoints instead. This is yet to be
documented.
This whole operation is a pre-requisite for Hot Standby, but has some value of
its own whether the hot standby patch makes 8.4 or not.
Simon Riggs, with lots of modifications by me.
and heap_deformtuple in favor of the newer functions heap_form_tuple et al
(which do the same things but use bool control flags instead of arbitrary
char values). Eliminate the former duplicate coding of these functions,
reducing the deprecated functions to mere wrappers around the newer ones.
We can't get rid of them entirely because add-on modules probably still
contain many instances of the old coding style.
Kris Jurka
free space information is stored in a dedicated FSM relation fork, with each
relation (except for hash indexes; they don't use FSM).
This eliminates the max_fsm_relations and max_fsm_pages GUC options; remove any
trace of them from the backend, initdb, and documentation.
Rewrite contrib/pg_freespacemap to match the new FSM implementation. Also
introduce a new variant of the get_raw_page(regclass, int4, int4) function in
contrib/pageinspect that let's you to return pages from any relation fork, and
a new fsm_page_contents() function to inspect the new FSM pages.
during parsing. Formerly the parser's stack was allocated with malloc
and so wouldn't be reclaimed; this patch makes it use palloc instead,
so that flushing the current context will reclaim the memory. Per
Marko Kreen.
to suppress zero-padding of "name" entries in indexes.
The alignment change is unlikely to save any space, but it is really needed
anyway to make the world safe for our widespread practice of passing plain
old C strings to functions that are declared as taking Name. In the previous
coding, the C compiler was entitled to assume that a Name pointer was
word-aligned; but we were failing to guarantee that. I think the reason
we'd not seen failures is that usually the only thing that gets done with
such a pointer is strcmp(), which is hard to optimize in a way that exploits
word-alignment. Still, some enterprising compiler guy will probably think
of a way eventually, or we might change our code in a way that exposes
more-obvious optimization opportunities.
The padding change is accomplished in one-liner fashion by declaring the
"name" index opclasses to use storage type "cstring" in pg_opclass.h.
Normally btree and hash don't allow a nondefault storage type, because they
don't have any provisions for converting the input datum to another type.
However, because name and cstring are effectively the same thing except for
padding, no conversion is needed --- we only need index_form_tuple() to treat
the datum as being cstring not name, and this is sufficient. This seems to
make for about a one-third reduction in the typical sizes of system catalog
indexes that involve "name" columns, of which we have many.
These two changes are only weakly related, but the alignment change makes
me feel safer that the padding change won't introduce problems, so I'm
committing them together.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
as those for inherited columns; that is, it's no longer allowed for a child
table to not have a check constraint matching one that exists on a parent.
This satisfies the principle of least surprise (rows selected from the parent
will always appear to meet its check constraints) and eliminates some
longstanding bogosity in pg_dump, which formerly had to guess about whether
check constraints were really inherited or not.
The implementation involves adding conislocal and coninhcount columns to
pg_constraint (paralleling attislocal and attinhcount in pg_attribute)
and refactoring various ALTER TABLE actions to be more like those for
columns.
Alex Hunsaker, Nikhil Sontakke, Tom Lane
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
uses of the long-deprecated float32 in contrib/seg; the definitions themselves
are still there, but no longer used. fmgr/README updated to match.
I added a CREATE FUNCTION to account for existing seg_center() code in seg.c
too, and some tests for it and the neighbor functions. At the same time,
remove checks for NULL which are not needed (because the functions are declared
STRICT).
I had to do some adjustments to contrib's btree_gist too. The choices for
representation there are not ideal for changing the underlying types :-(
Original patch by Zoltan Boszormenyi, with some adjustments by me.
constraint status of copied indexes (bug #3774), as well as various other
small bugs such as failure to pstrdup when needed. Allow INCLUDING INDEXES
indexes to be merged with identical declared indexes (perhaps not real useful,
but the code is there and having it not apply to LIKE indexes seems pretty
unorthogonal). Avoid useless work in generateClonedIndexStmt(). Undo some
poorly chosen API changes, and put a couple of routines in modules that seem
to be better places for them.
so that we will be able to create a cookie for all processes for CSVlogs.
It is set wherever MyProcPid is set. Take the opportunity to remove the now
unnecessary session-only restriction on the %s and %c escapes in log_line_prefix.
and fsync WAL at convenient intervals. For the moment it just tries to
offload this work from backends, but soon it will be responsible for
guaranteeing a maximum delay before asynchronously-committed transactions
will be flushed to disk.
This is a portion of Simon Riggs' async-commit patch, committed to CVS
separately because a background WAL writer seems like it might be a good idea
independently of the async-commit feature. I rebased walwriter.c on
bgwriter.c because it seemed like a more appropriate way of handling signals;
while the startup/shutdown logic in postmaster.c is more like autovac because
we want walwriter to quit before we start the shutdown checkpoint.
over a fairly long period of time, rather than being spat out in a burst.
This happens only for background checkpoints carried out by the bgwriter;
other cases, such as a shutdown checkpoint, are still done at full speed.
Remove the "all buffers" scan in the bgwriter, and associated stats
infrastructure, since this seems no longer very useful when the checkpoint
itself is properly throttled.
Original patch by Itagaki Takahiro, reworked by Heikki Linnakangas,
and some minor API editorialization by me.
module and teach PREPARE and protocol-level prepared statements to use it.
In service of this, rearrange utility-statement processing so that parse
analysis does not assume table schemas can't change before execution for
utility statements (necessary because we don't attempt to re-acquire locks
for utility statements when reusing a stored plan). This requires some
refactoring of the ProcessUtility API, but it ends up cleaner anyway,
for instance we can get rid of the QueryContext global.
Still to do: fix up SPI and related code to use the plan cache; I'm tempted to
try to make SQL functions use it too. Also, there are at least some aspects
of system state that we want to ensure remain the same during a replan as in
the original processing; search_path certainly ought to behave that way for
instance, and perhaps there are others.
continuously, and requests vacuum runs of "autovacuum workers" to postmaster.
The workers do the actual vacuum work. This allows for future improvements,
like allowing multiple autovacuum jobs running in parallel.
For now, the code keeps the original behavior of having a single autovac
process at any time by sleeping until the previous worker has finished.
columns procost and prorows, to allow simple user adjustment of the estimated
cost of a function call, as well as control of the estimated number of rows
returned by a set-returning function. We might eventually wish to extend this
to allow function-specific estimation routines, but there seems to be
consensus that we should try a simple constant estimate first. In particular
this provides a relatively simple way to control the order in which different
WHERE clauses are applied in a plan node, which is a Good Thing in view of the
fact that the recent EquivalenceClass planner rewrite made that much less
predictable than before.
per-column options for btree indexes. The planner's support for this is still
pretty rudimentary; it does not yet know how to plan mergejoins with
nondefault ordering options. The documentation is pretty rudimentary, too.
I'll work on improving that stuff later.
Note incompatible change from prior behavior: ORDER BY ... USING will now be
rejected if the operator is not a less-than or greater-than member of some
btree opclass. This prevents less-than-sane behavior if an operator that
doesn't actually define a proper sort ordering is selected.
Windows), arrange for each postmaster child process to be its own process
group leader, and deliver signals SIGINT, SIGTERM, SIGQUIT to the whole
process group not only the direct child process. This provides saner behavior
for archive and recovery scripts; in particular, it's possible to shut down a
warm-standby recovery server using "pg_ctl stop -m immediate", since delivery
of SIGQUIT to the startup subprocess will result in killing the waiting
recovery_command. Also, this makes Query Cancel and statement_timeout apply
to scripts being run from backends via system(). (There is no support in the
core backend for that, but it's widely done using untrusted PLs.) Per gripe
from Stephen Harris and subsequent discussion.
promoted to FATAL) end in exit(1) not exit(0). Then change the postmaster to
allow exit(1) without a system-wide panic, but not for the startup subprocess
or the bgwriter. There were a couple of places that were using exit(1) to
deliberately force a system-wide panic; adjust these to be exit(2) instead.
This fixes the problem noted back in July that if the startup process exits
with elog(ERROR), the postmaster would think everything is hunky-dory and
proceed to start up. Alternative solutions such as trying to run the entire
startup process as a critical section seem less clean, primarily because of
the fact that a fair amount of startup code is shared by all postmaster
children in the EXEC_BACKEND case. We'd need an ugly special case somewhere
near the head of main.c to make it work if it's the child process's
responsibility to determine what happens; and what's the point when the
postmaster already treats different children differently?
internal TypInfo table in bootstrap mode. This allows array_in and
array_out to be used during early bootstrap, which eliminates the
former obstacle to giving OUT parameters to built-in functions.
(table or index) before trying to open its relcache entry. This fixes
race conditions in which someone else commits a change to the relation's
catalog entries while we are in process of doing relcache load. Problems
of that ilk have been reported sporadically for years, but it was not
really practical to fix until recently --- for instance, the recent
addition of WAL-log support for in-place updates helped.
Along the way, remove pg_am.amconcurrent: all AMs are now expected to support
concurrent update.
created in the bootstrap phase proper, rather than added after-the-fact
by initdb. This is cleaner than before because it allows us to retire the
undocumented ALTER TABLE ... CREATE TOAST TABLE command, but the real reason
I'm doing it is so that toast tables of shared catalogs will now have
predetermined OIDs. This will allow a reasonably clean solution to the
problem of locking tables before we load their relcache entries, to appear
in a forthcoming patch.
it's handled just about like timezone; in particular, don't try
to read anything during InitializeGUCOptions. Should solve current
startup failure on Windows, and avoid wasted cycles if a nondefault
setting is specified in postgresql.conf too. Possibly we need to
think about a more general solution for handling 'expensive to set'
GUC options.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
LWLocks during a panic exit. This avoids the possible self-deadlock pointed
out by Qingqing Zhou. Also, I noted that an error during LoadFreeSpaceMap()
or BuildFlatFiles() would result in exit(0) which would leave the postmaster
thinking all is well. Added a critical section to ensure such errors don't
allow startup to proceed.
Backpatched to 8.1. The 8.0 code is a bit different and I'm not sure if the
problem exists there; given we've not seen this reported from the field, I'm
going to be conservative about backpatching any further.
(relpages/reltuples). To do this, create formal support in heapam.c for
"overwrite" tuple updates (including xlog replay capability) and use that
instead of the ad-hoc overwrites we'd been using in VACUUM and CREATE INDEX.
Take the responsibility for updating stats during CREATE INDEX out of the
individual index AMs, and do it where it belongs, in catalog/index.c. Aside
from being more modular, this avoids having to update the same tuple twice in
some paths through CREATE INDEX. It's probably not measurably faster, but
for sure it's a lot cleaner than before.
functions are not strict, they will be called (passing a NULL first parameter)
during any attempt to input a NULL value of their datatype. Currently, all
our input functions are strict and so this commit does not change any
behavior. However, this will make it possible to build domain input functions
that centralize checking of domain constraints, thereby closing numerous holes
in our domain support, as per previous discussion.
While at it, I took the opportunity to introduce convenience functions
InputFunctionCall, OutputFunctionCall, etc to use in code that calls I/O
functions. This eliminates a lot of grotty-looking casts, but the main
motivation is to make it easier to grep for these places if we ever need
to touch them again.
(respectively) to rename yylex and related symbols. Some were doing
it this way already, while others used not-too-reliable sed hacks in
the Makefiles. It's all nice and consistent now.
an LWLock instead of a spinlock. This hardly matters on Unix machines
but should improve startup performance on Windows (or any port using
EXEC_BACKEND). Per previous discussion.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
since it can take a fair amount of time and this can confuse boot scripts
that expect postmaster.pid to appear quickly. Move initialization of SSL
library and preloaded libraries to after that point, too, just for luck.
Per reports from Tony Caduto and others.
the parent table, even if the command that creates them is executed by
someone else (such as a superuser or a member of the owning role).
Per gripe from Michael Fuhr.
exit, instead of trying to take shortcuts. Introduce some additional
shutdown callback routines to eliminate kluges like having ProcKill
be responsible for shutting down the buffer manager. Ensure that the
order of operations during shutdown is predictable and what you would
expect given the module layering.
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
current time: provide a GetCurrentTimestamp() function that returns
current time in the form of a TimestampTz, instead of separate time_t
and microseconds fields. This is what all the callers really want
anyway, and it eliminates low-level dependencies on AbsoluteTime,
which is a deprecated datatype that will have to disappear eventually.
which is neither needed by nor related to that header. Remove the bogus
inclusion and instead include the header in those C files that actually
need it. Also fix unnecessary inclusions and bad inclusion order in
tsearch2 files.
only one argument. (Per recent discussion, the option to accept multiple
arguments is pretty useless for user-defined types, and would be a likely
source of security holes if it was used.) Simplify call sites of
output/send functions to not bother passing more than one argument.
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
indexes. Extend the macros in include/catalog/*.h to carry the info
about hand-assigned OIDs, and adjust the genbki script and bootstrap
code to make the relations actually get those OIDs. Remove the small
number of RelOid_pg_foo macros that we had in favor of a complete
set named like the catname.h and indexing.h macros. Next phase will
get rid of internal use of names for looking up catalogs and indexes;
but this completes the changes forcing an initdb, so it looks like a
good place to commit.
Along the way, I made the shared relations (pg_database etc) not be
'bootstrap' relations any more, so as to reduce the number of hardwired
entries and simplify changing those relations in future. I'm not
sure whether they ever really needed to be handled as bootstrap
relations, but it seems to work fine to not do so now.
proposal for OUT parameter support. The columns don't actually *do*
anything yet, they are just left NULLs. But I thought I'd commit this
part separately as a fairly pure example of the tasks needed when adding
a column to pg_proc or one of the other core system tables.
change saves a great deal of space in pg_proc and its primary index,
and it eliminates the former requirement that INDEX_MAX_KEYS and
FUNC_MAX_ARGS have the same value. INDEX_MAX_KEYS is still embedded
in the on-disk representation (because it affects index tuple header
size), but FUNC_MAX_ARGS is not. I believe it would now be possible
to increase FUNC_MAX_ARGS at little cost, but haven't experimented yet.
There are still a lot of vestigial references to FUNC_MAX_ARGS, which
I will clean up in a separate pass. However, getting rid of it
altogether would require changing the FunctionCallInfoData struct,
and I'm not sure I want to buy into that.
Document use of macros for pg_printf functions.
Bump major versions of all interfaces to handle movement of get_progname
from libpq to libpgport in 8.0, and probably other libpgport changes in 8.1.
in GetNewTransactionId(). Since the limit value has to be computed
before we run any real transactions, this requires adding code to database
startup to scan pg_database and determine the oldest datfrozenxid.
This can conveniently be combined with the first stage of an attack on
the problem that the 'flat file' copies of pg_shadow and pg_group are
not properly updated during WAL recovery. The code I've added to
startup resides in a new file src/backend/utils/init/flatfiles.c, and
it is responsible for rewriting the flat files as well as initializing
the XID wraparound limit value. This will eventually allow us to get
rid of GetRawDatabaseInfo too, but we'll need an initdb so we can add
a trigger to pg_database.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
plain SUSET instead. Also delay processing of options received in
client connection request until after we know if the user is a superuser,
so that SUSET values can be set that way by legitimate superusers.
Per recent discussion.
- replace some function signatures of the form "some_type foo()" with
"some_type foo(void)"
- replace a few instances of a literal 0 being used as a NULL pointer;
there are more instances of this in the code, but I just fixed a few
- in src/backend/utils/mb/wstrncmp.c, replace K&R style function
declarations with ANSI style, remove use of 'register' keyword
- remove an "extern" modifier that was applied to a function definition
(rather than a declaration)
Refactor code into something reasonably understandable, cause
use of the feature to not fail in standalone backends or in
EXEC_BACKEND case, fix sloppy guc.c table entries, make the
documentation minimally usable.
default tablespace --- they should always go in the database's default
tablespace. Adjust heap_create() API so that it is passed the relkind
to make this easier; should simplify any further tweaking of the same
sort.
possible to trap an error inside a function rather than letting it
propagate out to PostgresMain. You still have to use AbortCurrentTransaction
to clean up, but at least the error handling itself will cooperate.
keep track of portal-related resources separately from transaction-related
resources. This allows cursors to work in a somewhat sane fashion with
nested transactions. For now, cursor behavior is non-subtransactional,
that is a cursor's state does not roll back if you abort a subtransaction
that fetched from the cursor. We might want to change that later.
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
of a composite type to get that type's OID as their second parameter,
in place of typelem which is useless. The actual changes are mostly
centralized in getTypeInputInfo and siblings, but I had to fix a few
places that were fetching pg_type.typelem for themselves instead of
using the lsyscache.c routines. Also, I renamed all the related variables
from 'typelem' to 'typioparam' to discourage people from assuming that
they necessarily contain array element types.
place of time_t, as per prior discussion. The behavior does not change
on machines without a 64-bit-int type, but on machines with one, which
is most, we are rid of the bizarre boundary behavior at the edges of
the 32-bit-time_t range (1901 and 2038). The system will now treat
times over the full supported timestamp range as being in your local
time zone. It may seem a little bizarre to consider that times in
4000 BC are PST or EST, but this is surely at least as reasonable as
propagating Gregorian calendar rules back that far.
I did not modify the format of the zic timezone database files, which
means that for the moment the system will not know about daylight-savings
periods outside the range 1901-2038. Given the way the files are set up,
it's not a simple decision like 'widen to 64 bits'; we have to actually
think about the range of years that need to be supported. We should
probably inquire what the plans of the upstream zic people are before
making any decisions of our own.
than being random pieces of other files. Give bgwriter responsibility
for all checkpoint activity (other than a post-recovery checkpoint);
so this child process absorbs the functionality of the former transient
checkpoint and shutdown subprocesses. While at it, create an actual
include file for postmaster.c, which for some reason never had its own
file before.
about a third, make it work on non-Windows platforms again. (But perhaps
I broke the WIN32 code, since I have no way to test that.) Fold all the
paths that fork postmaster child processes to go through the single
routine SubPostmasterMain, which takes care of resurrecting the state that
would normally be inherited from the postmaster (including GUC variables).
Clean up some places where there's no particularly good reason for the
EXEC and non-EXEC cases to work differently. Take care of one or two
FIXMEs that remained in the code.
of ThisStartUpID and RedoRecPtr into new backends. It's a lot easier just
to make them all grab the values out of shared memory during startup.
This helps to decouple the postmaster from checkpoint execution, which I
need since I'm intending to let the bgwriter do it instead, and it also
fixes a bug in the Win32 port: ThisStartUpID wasn't getting propagated at
all AFAICS. (Doesn't give me a lot of faith in the amount of testing that
port has gotten.)
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
and should do now that we control our own destiny for timezone handling,
but this commit gets the bulk of the picayune diffs in place.
Magnus Hagander and Tom Lane.
* ALTER ... ADD COLUMN with defaults and NOT NULL constraints works per SQL
spec. A default is implemented by rewriting the table with the new value
stored in each row.
* ALTER COLUMN TYPE. You can change a column's datatype to anything you
want, so long as you can specify how to convert the old value. Rewrites
the table. (Possible future improvement: optimize no-op conversions such
as varchar(N) to varchar(N+1).)
* Multiple ALTER actions in a single ALTER TABLE command. You can perform
any number of column additions, type changes, and constraint additions with
only one pass over the table contents.
Basic documentation provided in ALTER TABLE ref page, but some more docs
work is needed.
Original patch from Rod Taylor, additional work from Tom Lane.
results with tuples as ordinary varlena Datums. This commit does not
in itself do much for us, except eliminate the horrid memory leak
associated with evaluation of whole-row variables. However, it lays the
groundwork for allowing composite types as table columns, and perhaps
some other useful features as well. Per my proposal of a few days ago.
remove separate implementation of ALTER TABLE SET WITHOUT OIDS in favor
of doing a regular DROP. Also, cause CREATE TABLE to account completely
correctly for the inheritance status of the OID column. This fixes
problems with dropping OID columns that have dependencies, as noted by
Christopher Kings-Lynne, as well as making sure that you can't drop an
OID column that was inherited from a parent.
* Changes incorrect CYGWIN defines to __CYGWIN__
* Some localtime returns NULL checks (when unchecked cause SEGVs under
Win32
regression tests)
* Rationalized CreateSharedMemoryAndSemaphores and
AttachSharedMemoryAndSemaphores (Bruce, I finally remembered to do it);
requires attention.
Claudio Natoli
exposed thereby. AFAICT these would not lead to any worse problems than
junk emitted on the backend's stdout, but we should have the option to
catch possible worse errors in future.
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
parameters to be declared with names. pg_proc has a column to store
names, and CREATE FUNCTION can insert data into it, but that's all as
yet. I need to do more work on the pg_dump and plpgsql portions of the
patch before committing those, but I thought I'd get the bulky changes
in before the tree drifts under me.
initdb forced due to pg_proc change.
BackendFork/SSDataBase/pgstat) startup, to allow fork/exec calls to
closely mimic (the soon to be provided) Win32 CreateProcess equivalent
calls.
Claudio Natoli
on 64-bit Solaris. Use a non-system-dependent datatype for UsedShmemSegID,
namely unsigned long (which we were already assuming could hold a shmem
key anyway, cf RecordSharedMemoryInLockFile).
This first part of the background writer does no syncing at all.
It's only purpose is to keep the LRU heads clean so that regular
backends seldom to never have to call write().
Jan
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
config file if it exists. This was already discussed as being a good
idea, and now seems the cleanest way to deal with initdb-time failures
on machines with small SHMMAX. (The submitted patches instead modified
initdb.sh to pass the correct sizing parameters, but that would still
leave standalone backends prone to failure later. An admin who needs
to use a standalone backend has enough trouble already, he shouldn't
have to manually configure its shmem settings...)
Peter Eisentraut
Tom Lane
Bruce Momjian
Robert Haas
Alvaro Herrera
Magnus Hagander
Heikki Linnakangas
Andrew Dunstan
Neil Conway
PostgreSQL Daemon
Jan Wieck