A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
The target failed, tested $PATH binaries, or tested a stale temporary
installation. Commit c66b438db6 missed
this. Back-patch to v10 (all supported versions).
The "check" target no longer needs to depend on "all", because it now
runs "install" directly, which in turn depends on "all". Doing both
will cause problems with parallel make, because two builds will run next
to each other.
Also remove the redirection of the temp-install output into a log file.
This was appropriate when this was done from within pg_regress, but now
it's just a regular make run, and especially with the above changes this
will now take the place of running the "all" target before the test
suites.
problem report by Jeff Janes, patch in part by Michael Paquier
This is to see if it will stop intermittent build failures on buildfarm
member okapi. We know that gmake 3.82 has some problems with sometimes
not honoring dependencies in parallel builds, and it seems likely that
this is more of the same. Since the vast bulk of the work in the preproc
directory is associated with creating preproc.c and then preproc.o,
parallelism buys us hardly anything here anyway.
Also, make both this .NOTPARALLEL and the one previously added in
interfaces/ecpg/Makefile be conditional on "ifeq ($(MAKE_VERSION),3.82)".
The known bug in gmake is fixed upstream and should not be present in
3.83 and up, and there's no reason to think it affects older releases.
Investigation shows that some intermittent build failures in ecpg are the
result of a gmake bug that was reported quite some time ago:
http://savannah.gnu.org/bugs/?30653
Preventing parallel builds of the ecpg subdirectories seems to dodge the
bug. Per yesterday's pgsql-hackers discussion, there are some other things
in the subdirectory makefiles that seem rather unsafe for parallel builds
too, but there's little point in fixing them as long as we have to work
around a make bug.
Back-patch to 9.1; parallel builds weren't very well supported before
that anyway.
Make sure ecpg/include/ is rebuilt before the other subdirectories,
so that ecpg_config.h is up to date. This is not likely to matter
during production builds, only development, so no back-patch.
In addition to the
all-foo-recurse: all-bar-recurse
dependencies that constraint the order of the rule execution, we need
install-foo-recurse: install-bar-recurse
dependencies in case one runs make install without a make all first,
as some people apparently do.
Add some additional dependencies to constrain the build order to prevent
parallel make from failing. In the case of src/Makefile, this is likely to be
too complicated to be worth maintaining, so just add .NOTPARALLEL to get the
old for-loop-like behavior.
More fine-tuning might be necessary for some platforms or configurations.
Replace for loops in makefiles with proper dependencies. Parallel
make can now span across directories. Also, make -k and make -q work
properly.
GNU make 3.80 or newer is now required.
errors in any commands, including in various clean targets that have so far
been handled inconsistently. make -i is available to ignore all errors in
a consistent and official way.
The latter updated accordingly. Also add `dist' and `distcheck' targets
to play with, but caveat packager.
Updated backend/bootstrap and backend/parser makefile to make them
marginally builddir aware and fix the usual set of things.
Add rule to automatically remake config.h dependent on config.h.in and
config.status. (Adopted from Autoconf manual and about every other
package.) On a good day we should now have a complete and accurate set
of dependencies throughout everything.
standard targets and behaviour. Replaced Makefile.in's with
Makefile's and declared the respective variables in Makefile.global.
maintainer-clean target now available at top level, although it does
not work in the backend tree yet.
Cleanup pass over Makefile.shlib, renamed some targets and variables.
The shared library symlink tests are now done by make, not the shell.
ecpg: Remove one warning in sloppy flex output.
PL/Perl and Perl interface: the MakeMaker documentation is confusing,
the realclean target *does* "delete derived files", but it also
uninstalls them. Don't use that.
The submake targets in the various bin directories that update libpq
should `make all', not `make libpq.a'. That is a) unportable, and
b) doesn't build the shared library.
Attached you'll find a (big) patch that fixes make dep and make
depend in all Makefiles where I found it to be appropriate.
It also removes the dependency in Makefile.global for NAMEDATALEN
and OIDNAMELEN by making backend/catalog/genbki.sh and bin/initdb/initdb.sh
a little smarter.
This no longer requires initdb.sh that is turned into initdb with
a sed script when installing Postgres, hence initdb.sh should be
renamed to initdb (after the patch has been applied :-) )
This patch is against the 6.3 sources, as it took a while to
complete.
Please review and apply,
Cheers,
Jeroen van Vianen
+
+ - use char[] as string not as array of bytes that is integers
+
+ Sun Feb 22 16:37:36 CET 1998
+
+ - use long for all size variables
+ - added execute immediate statement
+
+ Sun Feb 22 20:41:32 CET 1998
+
+ - use varcharsize = 1 for all simple types, 0 means pointer, > 1
+ means array if type is char resp. unsigned char
+
+ Thu Feb 24 12:26:12 CET 1998
+
+ - allow 'go to' in whenever statement as well as 'goto'
+ - new argument 'stop' for whenever statement
From: Michael Meskes <meskes@topsystem.de>
below is the patch to have views to override the permission
checks for the accessed tables. Now we can do the following:
CREATE VIEW db_user AS SELECT
usename,
usesysid,
usecreatedb,
usetrace,
usecatupd,
'**********'::text as passwd,
valuntil
FROM pg_user;
REVOKE ALL ON pg_user FROM public;
REVOKE ALL ON db_user FROM public;
GRANT SELECT ON db_user TO public;
Well this is not really a patch. But I mananged to get Linus' old Postgres95
precompiler to compile and work with PostgreSQL. The next step would be to
collect bug/missing feature reports and to put it into the distribution so
that it is made with the standard make procedure.
Warning! So far it is not tested much and it does not install correctly. But
I was able to create a small binary with it.
Peter Eisentraut
Noah Misch
Peter Eisentraut
Bruce Momjian
Tom Lane
Michael Meskes
Marc G. Fournier
Thomas G. Lockhart