linking both executables and shared libraries, and we add on LDFLAGS_EX when
linking executables or LDFLAGS_SL when linking shared libraries. This
provides a significantly cleaner way of dealing with link-time switches than
the former behavior. Also, make sure that the various platform-specific
%.so: %.o rules incorporate LDFLAGS and LDFLAGS_SL; most of them missed that
before. (I did not add these variables for the platforms that invoke $(LD)
directly, however. It's not clear if we can do that safely, since for the
most part we assume these variables use CC command-line syntax.)
Per gripe from Aaron Swenson and subsequent investigation.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
Update install-sh to that from Autoconf 2.63, plus our Darwin-specific
changes (which I simplified a bit). install-sh is now able to install
multiple files in one run, so we could simplify our makefiles sometime.
install-sh also now has a -d option to create directories, so we don't need
mkinstalldirs anymore.
Use AC_PROG_MKDIR_P in configure.in, so we can use mkdir -p when available
instead of install-sh -d. For consistency with the rest of the world,
the corresponding make variable has been renamed from $(mkinstalldirs) to
$(MKDIR_P).
a mismatching installation. Pick a default port number calculated from the
version number, and try a few times with other numbers if that one doesn't
work. Check if we can connect to the port before starting our own postmaster,
to detect some other server already running there. To simplify the code,
drop --temp-port option and use --port for both temp-install and pre-installed
case.
"make all", and then reference them there during the actual tests. This
makes the handling of these files more parallel to that of regress.so,
and in particular simplifies use of the regression tests outside the
original build tree. The PGDG and Red Hat RPMs have been doing this via
patches for a very long time. Inclusion of the change in core was requested
by Jørgen Austvik of Sun, and I can't see any reason not to.
I attempted to fix the MSVC scripts for this too, but they may need
further tweaking ...
modules are built. Foremost, it creates a solid distinction between these two
types of targets based on what had already been implemented and duplicated in
ad hoc ways before. Specifically,
- Dynamically loadable modules no longer get a soname. The numbers previously
set in the makefiles were dummy numbers anyway, and the presence of a soname
upset a few packaging tools, so it is nicer not to have one.
- The cumbersome detour taken on installation (build a libfoo.so.0.0.0 and
then override the rule to install foo.so instead) is removed.
- Lots of duplicated code simplified.
errors in any commands, including in various clean targets that have so far
been handled inconsistently. make -i is available to ignore all errors in
a consistent and official way.
regression driver into two parts and reusing half of it. Required to
run ECPG tests without a shell on MSVC builds.
Fix ECPG thread tests for MSVC build (incl output files).
Joachim Wieland and Magnus Hagander
for input/ and output/ directories, because with the addition of
largeobject_1.source, they're not the same list. Apparently the current
buildfarm process does not exercise whether 'make distclean' leaves a
clean tree behind, else the farm would have been failing for awhile.
the generated files, to help Visual C++ to run these tests. The tests still
pass in VPATH and normal builds.
Patch from Magnus Hagander, editorialized by me.
pg_regress: there's no other way to cope with testing a relocated
installation. Seems better to call it --psqldir though, since the
only thing we need to find in that case is psql. It'd be better if
we could use find_other_exec, but that's not happening unless we are
willing to install pg_regress alongside psql, which seems unlikely
to happen.
just exec instead of creating a subprocess. This reduces process usage
from four processes per parallel test to two. I have no idea whether
a comparable optimization is possible or useful in the Windows port.
This allows it to be used on Windows without installing mingw
(though you do still need 'diff'), and opens the door to future
improvements such as message localization.
Magnus Hagander and Tom Lane.
setting for the regression makefile, allowing Windows users to force locale
settings since Windows does not get its locale from the environment.
Per Petr Jelinek.
on the not-very-good .so pattern rules in the port-specific Makefiles.
(This leaves only pgxs' MODULES case needing those rules.) Also,
compile pgsleep.c locally and add it to regress.so to avoid failure
on AIX.
port number, and use a default value for it that is dependent on the
configuration-time DEF_PGPORT. Should make the world safe for running
parallel 'make check' in different branches. Back-patch as far as 7.4
so that this actually is useful.
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
which are munged by sed, such as:
/e/cygwin/opt/diff9c/pgsql/src/test/regress/data/agg.data to be
correctly passed as:
e:/cygwin/opt/diff9c/pgsql/src/test/regress/data/agg.data
FWIW, "fixes" a large (> 20) tests under Win32.
Claudio Natoli
Eliminate the mysterious games that the Cygwin build plays with the linker
flag variables. DLLLIBS is gone, use SHLIB_LINK like everyone else.
Detect cygipc in configure, after the linker flags are set up, otherwise
configure might not work at all.
Make sure everything is covered by make clean.
Fix the build of the new conversion procedure modules.
Add new DLLIMPORT markers where required.
Finally, the compiler complains if we use an explicit
-I/usr/local/include, so don't do that. Curiously, -L/usr/local/lib is
still necessary.
under libdir, for a cleaner separation in the installation layout
and compatibility with binary packaging standards. Point backend's
default search location there. The contrib modules are also
installed in the said location, giving them the benefit of the
default search path as well. No changes in user interface
nevertheless.
particular, allow linking with arbitrary commands rather than only $(AR) or
$(LD), and treat C++ without hacks.
Add option to disable shared libraries. This takes the place of the
BSD_SHLIB variable. The regression test driver ignores the plpgsql test
if there are no shared libraries available.
source directory. This involves mostly makefiles using $(srcdir) when they
might have used ".". (Regression tests don't work with this, yet.)
Sort out usage of CPPFLAGS, CFLAGS (and CXXFLAGS). Add "override" keyword
in most places, to preserve necessary flags even when the user overrode the
flags.
This patch forces the use of 'DROP VIEW' to destroy views.
It also changes the syntax of DROP VIEW to
DROP VIEW v1, v2, ...
to match the syntax of DROP TABLE.
Some error messages were changed so this patch also includes changes to the
appropriate expected/*.out files.
Doc changes for 'DROP TABLE" and 'DROP VIEW' are included.
--
Mark Hollomon
Instead of hard-wiring one result file per platform, there is a map file
'resultmap' that says which one to use --- a lot like template/.similar.
I have only created entries in resultmap for my own platform (HPUX) so
far; feel free to add lines for other platforms.
1. Using 100 digits after decimal point on the default
make runtest.
2. Using 1000 digits after decimal point in a new target
make bigtest.
At the end of 'make runtest', a hint about the new bigtest is
printed.
Jan
As Bruce mentioned, this is due to the conflict among changes we made.
Included patches should fix the problem(I changed all MB to
MULTIBYTE). Please let me know if you have further problem.
P.S. I did not include pathces to configure and gram.c to save the
file size(configure.in and gram.y modified).
Included are patches intended for allowing PostgreSQL to handle
multi-byte charachter sets such as EUC(Extende Unix Code), Unicode and
Mule internal code. With the MB patch you can use multi-byte character
sets in regexp and LIKE. The encoding system chosen is determined at
the compile time.
To enable the MB extension, you need to define a variable "MB" in
Makefile.global or in Makefile.custom. For further information please
take a look at README.mb under doc directory.
(Note that unlike "jp patch" I do not use modified GNU regexp any
more. I changed Henry Spencer's regexp coming with PostgreSQL.)