9e2d870119 enabled the COPY command to skip malformed data, however
there was no visibility into how many tuples were actually skipped
during the COPY FROM.
This commit adds a new "tuples_skipped" column to
pg_stat_progress_copy view to report the number of tuples that were
skipped because they contain malformed data.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/d12fd8c99adcae2744212cb23feff6ed%40oss.nttdata.com
Add WITHOUT OVERLAPS clause to PRIMARY KEY and UNIQUE constraints.
These are backed by GiST indexes instead of B-tree indexes, since they
are essentially exclusion constraints with = for the scalar parts of
the key and && for the temporal part.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
Use C99 designated initializer syntax for array elements, instead of
writing the position in a comment. This is less verbose and much more
readable. Akin to cc15059634.
One disadvantage is that the BuiltinTrancheNames array now has a hole of
51 NULLs -- previously, the array elements were shifted 51 elements
downward to avoid this. This can be fixed by merging the
IndividualLWLockNames array into BuiltinTrancheNames, which would occupy
those 51 pointers, but because it requires some arguably ugly Meson
hackery, it's left for later.
Discussion: https://postgr.es/m/202401231025.gbv4nnte5fmm@alvherre.pgsql
This change adds a new meta-command called \syncpipeline to pgbench,
able to send a sync message without flushing using the new libpq
function PQsendPipelineSync().
This meta-command is available within a block made of \startpipeline and
\endpipeline.
Author: Anthonin Bonnefoy
Discussion: https://postgr.es/m/CAO6_XqpcNhW6LZHLF-2NpPzdTbyMm4-RVkr3+AP5cOKSm9hrWA@mail.gmail.com
This adds a Node *escontext parameter to it and a bunch of functions
downstream to it, replacing any ereport()s in that path by either
errsave() or ereturn() as appropriate. This also adds code to those
functions where necessary to return early upon encountering a soft
error.
The changes here are mainly intended to suppress errors in the
functions of jsonfuncs.c. Functions in any external modules, such as
arrayfuncs.c, that those functions may in turn call are not changed
here based on the assumption that the various checks in jsonfuncs.c
functions should ensure that only values that are structurally valid
get passed to the functions in those external modules. An exception
is made for domain_check() to allow handling domain constraint
violation errors softly.
For testing, this adds a function jsonb_populate_record_valid(),
which returns true if jsonb_populate_record() would finish without
causing an error for the provided JSON object, false otherwise. Note
that jsonb_populate_record() internally calls populate_record(),
which in turn uses populate_record_field().
Extracted from a much larger patch to add SQL/JSON query functions.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund,
Alexander Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers,
Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby,
Álvaro Herrera, Jian He, Peter Eisentraut
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqHROpf9e644D8BRqYvaAPmgBZVup-xKMDPk-nd4EpgzHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This adjusts the code for CoerceViaIO and CoerceToDomain expression
nodes to handle errors softly.
For CoerceViaIo, this adds a new ExprEvalStep opcode
EEOP_IOCOERCE_SAFE, which is implemented in the new accompanying
function ExecEvalCoerceViaIOSafe(). The only difference from
EEOP_IOCOERCE's inline implementation is that the input function
receives an ErrorSaveContext via the function's
FunctionCallInfo.context, which it can use to handle errors softly.
For CoerceToDomain, this simply entails replacing the ereport() in
ExecEvalConstraintNotNull() and ExecEvalConstraintCheck() by
errsave() passing it the ErrorSaveContext passed in the expression's
ExprEvalStep.
In both cases, the ErrorSaveContext to be used is passed by setting
ExprState.escontext to point to it before calling ExecInitExprRec()
on the expression tree whose errors are to be handled softly.
Note that there's no functional change as of this commit as no call
site of ExecInitExprRec() has been changed. This is intended for
implementing new SQL/JSON expression nodes in future commits.
Extracted from a much larger patch to add SQL/JSON query functions.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund,
Alexander Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers,
Zihong Yu, Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby,
Álvaro Herrera, Jian He, Peter Eisentraut
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqHROpf9e644D8BRqYvaAPmgBZVup-xKMDPk-nd4EpgzHw@mail.gmail.com
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This command, when used to add a column on a parent table with a complex
inheritance tree, tried to update multiple times the same tuple in
pg_attribute for a child table when incrementing attinhcount, causing
failures with "tuple already updated by self" because of a missing
CommandCounterIncrement() between two updates.
This exists for a rather long time, so backpatch all the way down.
Reported-by: Alexander Lakhin
Author: Tender Wang
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/18297-b04cd83a55b51e35@postgresql.org
Backpatch-through: 12
Commit abb0b4fc03 moved the shared state for autoprewarm to a
dynamic shared memory (DSM) segment, but it left apw_detach_shmem()
in the on_shmem_exit callback list for the autoprewarm leader
process. This is a problem because shmem_exit() detaches all the
DSM segments prior to calling the on_shmem_exit callbacks, thus
producing segfaults in the exit path for the autoprewarm leader
process.
To fix, move apw_detach_shmem() to the before_shmem_exit callback
list. This commit also adds a check to pg_prewarm's test that the
server shut down normally. It might be worth making this a common
check for all shutdowns in TAP tests, but that is left as a future
exercise.
Reported-by: Andres Freund
Reviewed-by: Andres Freund, Álvaro Herrera
Discussion: https://postgr.es/m/20240122204117.swton324xcoodnyi%40awork3.anarazel.de
AM was used throughout the documentation to denote Access Method, but
the acronym was not described. This adds an acronym entry as well as
a glossary term which the acronym links to. Each page which describe
AMs have the first occurrence with <acronym> markup.
Reported-by: alaa.attya91@gmail.com
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/169974408805.398198.6927340566912872957@wrigleys.postgresql.org
portname is set to host_system, but host_system might still be changed
later in the file. As a consequence, platforms where host_system is
changed later wouldn't find some of their platform-specific files
(driven by portname), and the build would fail. Move the assignment
of portname further down after the last change of host_system (but
before further overriding assignments to portname).
Discussion: https://www.postgresql.org/message-id/flat/CAC7zN94TdsHhY88XkroJzSMx7E%3DBQpV9LKKjNSEnTM04ihoWCA%40mail.gmail.com
This reverts commit 728f86fec6.
The signal handling was a few bricks shy of a load in that commit,
which made the walreceiver non-responsive to SIGTERM while it was
waiting for the connection to be established. That prevented a standby
from being promoted.
Since it was non-essential refactoring, let's revert it to make v16
work the same as earlier releases. I reverted it in 'master' too, to
keep the branches in sync. The refactoring was a good idea as such,
but it needs a bit more work. Once we have developed a complete patch
with this issue fixed, let's re-apply that to 'master'.
Reported-by: Kyotaro Horiguchi
Backpatch-through: 16
Discussion: https://www.postgresql.org/message-id/20231231.200741.1078989336605759878.horikyota.ntt@gmail.com
This commit tweaks a couple of things in 035_standby_logical_decoding to
hopefully stabilize it:
- Autovacuum is now disabled, as it could hold a global xmin with a
transaction.
- Conflicts are generated with command sequences that removed rows (on
catalogs, shared or non-shared, or just plain relations) followed by a
VACUUM. This was unstable because these did not check that the horizon
moved between the SQL commands and the VACUUM. The logic is refactored
as follows, to ensure that VACUUM removes dead rows before testing for
slot invalidation on a standby (idea suggested by Andres Freund):
-- Grab the current horizon.
-- Launch SQL commands removing rows.
-- Check that the snapshot horizon has been updated.
-- Launch VACUUM on the relation whose rows have been removed by the
first step.
Note that there are still some issues because of standby snapshot WAL
records generated by the bgwriter, but this makes the test much more
stable.
Per reports from buildfarm members dikkop and skink, with analysis and
tests from Alexander Lakhin.
While on it, fix a couple of incorrect comments.
Author: Bertrand Drouvot
Reviewed-by: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/OSZPR01MB6310ED3CEDB531BCEDBC6AF2FD479@OSZPR01MB6310.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/bf67e076-b163-9ba3-4ade-b9fc51a3a8f6@gmail.com
Backpatch-through: 16
Until now PostgreSQL has not been very smart about optimizing away IS
NOT NULL base quals on columns defined as NOT NULL. The evaluation of
these needless quals adds overhead. Ordinarily, anyone who came
complaining about that would likely just have been told to not include
the qual in their query if it's not required. However, a recent bug
report indicates this might not always be possible.
Bug 17540 highlighted that when we optimize Min/Max aggregates the IS NOT
NULL qual that the planner adds to make the rewritten plan ignore NULLs
can cause issues with poor index choice. That particular case
demonstrated that other quals, especially ones where no statistics are
available to allow the planner a chance at estimating an approximate
selectivity for can result in poor index choice due to cheap startup paths
being prefered with LIMIT 1.
Here we take generic approach to fixing this by having the planner check
for NOT NULL columns and just have the planner remove these quals (when
they're not needed) for all queries, not just when optimizing Min/Max
aggregates.
Additionally, here we also detect IS NULL quals on a NOT NULL column and
transform that into a gating qual so that we don't have to perform the
scan at all. This also works for join relations when the Var is not
nullable by any outer join.
This also helps with the self-join removal work as it must replace
strict join quals with IS NOT NULL quals to ensure equivalence with the
original query.
Author: David Rowley, Richard Guo, Andy Fan
Reviewed-by: Richard Guo, David Rowley
Discussion: https://postgr.es/m/CAApHDvqg6XZDhYRPz0zgOcevSMo0d3vxA9DvHrZtKfqO30WTnw@mail.gmail.com
Discussion: https://postgr.es/m/17540-7aa1855ad5ec18b4%40postgresql.org
--enable-injection-points and -Dinjection_points=true are now given to
the commands triggered by the tasks where assertions are enabled,
providing coverage for injection points or any test using them.
Author: Heikki Linnakangas
Discussion: https://postgr.es/m/0615a424-b726-4157-afa7-4245629f9512@iki.fi
GetNamedDSMSegment() doesn't check whether dsm_attach() returns
NULL, which creates the possibility of a NULL pointer dereference
soon after. To fix, emit an ERROR if dsm_attach() returns NULL.
This shouldn't happen, but it would be nice to avoid a segfault if
it does. In passing, tidy up the surrounding code.
Reported-by: Tom Lane
Reviewed-by: Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/3348869.1705854106%40sss.pgh.pa.us
This commit fixes an error message that failed to show the correct
function and library names when a function cannot be loaded.
While on it, adjust the call to load_external_function() so as this
ERROR can be reached, by making load_external_function() return NULL
rather than fail if a function cannot be found for a given injection
point.
Thinkos in d86d20f0ba.
1. The memcpy()s in InjectionPointAttach() would copy garbage from
beyond the end of input string to the buffer in shared memory. You
won't usually notice, but if there is not enough valid mapped memory
beyond the end of the string, the read of unmapped memory will
segfault. This was flagged by the Cirrus CI build with address
sanitizer enabled.
2. The memcpy() in injection_point_cache_add() failed to copy the NULL
terminator.
Discussion: https://www.postgresql.org/message-id/0615a424-b726-4157-afa7-4245629f9512%40iki.fi
When a pipeline is opened with \startpipeline and not closed, pgbench
will either error on the next transaction with a "already in pipeline
mode" error or successfully end if this was the last transaction --
despite not sending anything that was piped in the pipeline.
Make it an error to reach end of script is reached while there's an
open pipeline.
Backpatch to 14, where pgbench got support for pipelines.
Author: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Za4IObZkDjrO4TcS@paquier.xyz
This was previously fixed in 9e215378d but got broken again as a result
of 2489d76c4. It seems that commit causes ppi_clauses to contain
duplicate clauses and it's no longer safe to check the list_length of
that list to determine if there are join conditions other than what's
mentioned in ppi_clauses.
Here we adjust the check to count the distinct rinfo_serial mentioned in
ppi_clauses. We expect that extra->restrictlist won't have duplicate
rinfo_serials.
Reported-by: Amadeo Gallardo
Author: Richard Guo
Discussion: https://postgr.es/m/CADFREbW-BLJd7-a5J%2B5wjVumeFG1ByXiSOFzMtkmY_SDWckTxw%40mail.gmail.com
Backpatch-through: 16, where 2489d76c4 was introduced.
This provides basic coverage for injection points within a single
process, while providing some callbacks that can be used for other
tests. There are plans to extend this module later with more
advanced capabilities for tests.
Author: Michael Paquier, with comment fixes from Ashutosh Bapat.
Reviewed-by: Ashutosh Bapat, Nathan Bossart, Álvaro Herrera, Dilip
Kumar, Amul Sul, Nazir Bilal Yavuz
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
Injection points are a new facility that makes possible for developers
to run custom code in pre-defined code paths. Its goal is to provide
ways to design and run advanced tests, for cases like:
- Race conditions, where processes need to do actions in a controlled
ordered manner.
- Forcing a state, like an ERROR, FATAL or even PANIC for OOM, to force
recovery, etc.
- Arbitrary sleeps.
This implements some basics, and there are plans to extend it more in
the future depending on what's required. Hence, this commit adds a set
of routines in the backend that allows developers to attach, detach and
run injection points:
- A code path calling an injection point can be declared with the macro
INJECTION_POINT(name).
- InjectionPointAttach() and InjectionPointDetach() to respectively
attach and detach a callback to/from an injection point. An injection
point name is registered in a shmem hash table with a library name and a
function name, which will be used to load the callback attached to an
injection point when its code path is run.
Injection point names are just strings, so as an injection point can be
declared and run by out-of-core extensions and modules, with callbacks
defined in external libraries.
This facility is hidden behind a dedicated switch for ./configure and
meson, disabled by default.
Note that backends use a local cache to store callbacks already loaded,
cleaning up their cache if a callback has found to be removed on a
best-effort basis. This could be refined further but any tests but what
we have here was fine with the tests I've written while implementing
these backend APIs.
Author: Michael Paquier, with doc suggestions from Ashutosh Bapat.
Reviewed-by: Ashutosh Bapat, Nathan Bossart, Álvaro Herrera, Dilip
Kumar, Amul Sul, Nazir Bilal Yavuz
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
When evaluating a query with a multi-column GROUP BY clause, we can minimize
sort operations or avoid them if we synchronize the order of GROUP BY clauses
with the ORDER BY sort clause or sort order, which comes from the underlying
query tree. Grouping does not imply any ordering, so we can compare
the keys in arbitrary order, and a Hash Agg leverages this. But for Group Agg,
we simply compared keys in the order specified in the query. This commit
explores alternative ordering of the keys, trying to find a cheaper one.
The ordering of group keys may interact with other parts of the query, some of
which may not be known while planning the grouping. For example, there may be
an explicit ORDER BY clause or some other ordering-dependent operation higher up
in the query, and using the same ordering may allow using either incremental
sort or even eliminating the sort entirely.
The patch always keeps the ordering specified in the query, assuming the user
might have additional insights.
This introduces a new GUC enable_group_by_reordering so that the optimization
may be disabled if needed.
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Author: Andrei Lepikhov, Teodor Sigaev
Reviewed-by: Tomas Vondra, Claudio Freire, Gavin Flower, Dmitry Dolgov
Reviewed-by: Robert Haas, Pavel Borisov, David Rowley, Zhihong Yu
Reviewed-by: Tom Lane, Alexander Korotkov, Richard Guo, Alena Rybakina
Target columns in UPDATE ... SET must not be qualified with the target
table; we disallow this because it'd create ambiguity about which name
is the column name in case of field-qualified names. However, newbies
have been seen to expect that they could qualify a target name just
like other names. The error message when they do is confusing:
"column "foo" of relation "foo" does not exist". To improve matters,
issue a HINT if the invalid name is qualified and matches the
relation's alias.
James Coleman (editorialized a bit by me)
Discussion: https://postgr.es/m/CAAaqYe8S2Qa060UV-YF5GoSd5PkEhLV94x-fEi3=TOtpaXCV+w@mail.gmail.com
These support functions will transform expressions with constant
range values into direct comparisons on the range bound values,
which are frequently better-optimizable. The transformation is
skipped however if it would require double evaluation of a
volatile or expensive element expression.
Along the way, add the range opfamily OID to range typcache entries,
since load_rangetype_info has to compute that anyway and it seems
silly to duplicate the work later.
Kim Johan Andersson and Jian He, reviewed by Laurenz Albe
Discussion: https://postgr.es/m/94f64d1f-b8c0-b0c5-98bc-0793a34e0851@kimmet.dk
Besides showcasing the DSM registry, this prevents pg_prewarm from
stealing from the main shared memory segment's extra buffer space
when autoprewarm_start_worker() and autoprewarm_dump_now() are used
without loading the module via shared_preload_libraries.
Suggested-by: Michael Paquier
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/20231205034647.GA2705267%40nathanxps13
Presently, the most straightforward way for a shared library to use
shared memory is to request it at server startup via a
shmem_request_hook, which requires specifying the library in
shared_preload_libraries. Alternatively, the library can create a
dynamic shared memory (DSM) segment, but absent a shared location
to store the segment's handle, other backends cannot use it. This
commit introduces a registry for DSM segments so that these other
backends can look up existing segments with a library-specified
string. This allows libraries to easily use shared memory without
needing to request it at server startup.
The registry is accessed via the new GetNamedDSMSegment() function.
This function handles allocating the segment and initializing it
via a provided callback. If another backend already created and
initialized the segment, it simply attaches the segment.
GetNamedDSMSegment() locks the registry appropriately to ensure
that only one backend initializes the segment and that all other
backends just attach it.
The registry itself is comprised of a dshash table that stores the
DSM segment handles keyed by a library-specified string.
Reviewed-by: Michael Paquier, Andrei Lepikhov, Nikita Malakhov, Robert Haas, Bharath Rupireddy, Zhang Mingli, Amul Sul
Discussion: https://postgr.es/m/20231205034647.GA2705267%40nathanxps13
Presently, this section meanders through a few different features,
and the text itself is terse. This commit attempts to improve
matters by splitting the section into smaller sections and by
expanding the text for clarity. This is preparatory work for a
follow-up commit that will introduce a way for libraries to use
shared memory without needing to request it at startup time.
Reviewed-by: Aleksander Alekseev, Bharath Rupireddy, Abhijit Menon-Sen
Discussion: https://postgr.es/m/20240112041430.GA3557928%40nathanxps13
Discussion: https://postgr.es/m/20231205034647.GA2705267%40nathanxps13
Since 5a1dfde833, 2PC filenames use FullTransactionId. Thus, it needs to
convert TransactionId to FullTransactionId in StandbyTransactionIdIsPrepared()
using TransamVariables->nextXid. However, ProcArrayApplyRecoveryInfo()
first releases locks with usage StandbyTransactionIdIsPrepared(), then advances
TransamVariables->nextXid. This sequence of actions could cause errors.
This commit makes ProcArrayApplyRecoveryInfo() advance
TransamVariables->nextXid before releasing locks.
Reported-by: Thomas Munro, Michael Paquier
Discussion: https://postgr.es/m/CA%2BhUKGLj_ve1_pNAnxwYU9rDcv7GOhsYXJt7jMKSA%3D5-6ss-Cw%40mail.gmail.com
Discussion: https://postgr.es/m/Zadp9f4E1MYvMJqe%40paquier.xyz
This is support function 12 for the GiST AM and translates
"well-known" RT*StrategyNumber values into whatever strategy number is
used by the opclass (since no particular numbers are actually
required). We will use this to support temporal PRIMARY
KEY/UNIQUE/FOREIGN KEY/FOR PORTION OF functionality.
This commit adds two implementations, one for internal GiST opclasses
(just an identity function) and another for btree_gist opclasses. It
updates btree_gist from 1.7 to 1.8, adding the support function for
all its opclasses.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
Given an already-initialized hash state and a NUL-terminated string,
accumulate the hash of the string into the hash state and return the
length for the caller to (optionally) save for the finalizer. This
avoids a strlen call.
If the string pointer is aligned, we can use a word-at-a-time
algorithm for NUL lookahead. The aligned case is only used on 64-bit
platforms, since it's not worth the extra complexity for 32-bit.
Handling the tail of the string after finishing the word-wise loop
was inspired by NetBSD's strlen(), but no code was taken since that
is written in assembly language.
As demonstration, use this in the search path cache. This brings the
general case performance closer to the special case optimization done
in commit a86c61c9ee. There are other places that could benefit, but
that is left for future work.
Jeff Davis and John Naylor
Reviewed by Heikki Linnakangas, Jian He, Junwang Zhao
Discussion: https://postgr.es/m/3820f030fd008ff14134b3e9ce5cc6dd623ed479.camel%40j-davis.com
Discussion: https://postgr.es/m/b40292c99e623defe5eadedab1d438cf51a4107c.camel%40j-davis.com
It can be useful for a hash function to expose separate initialization,
accumulation, and finalization steps. In particular, this is useful
for building inline hash functions for simplehash. Instead of trying
to whack around hash_bytes while maintaining its current behavior on
all platforms, we base this work on fasthash (MIT licensed) which
is simple, faster than hash_bytes for inputs over 12 bytes long,
and also passes the hash function testing suite SMHasher.
The fasthash functions have been reimplemented using our added-on
incremental interface to validate that this method will still give
the same answer, provided we have the input length ahead of time.
This functionality lives in a new header hashfn_unstable.h. The name
implies we have the freedom to change things across versions that
would be unacceptable for our other hash functions that are used for
e.g. hash indexes and hash partitioning. As such, these should only
be used for in-memory data structures like hash tables. There is also
no guarantee of being independent of endianness or pointer size.
As demonstration, use fasthash for pgstat_hash_hash_key. Previously
this called the 32-bit murmur finalizer on the three elements,
then joined them with hash_combine(). The new function is simpler,
faster and takes up less binary space. While the collision and bias
behavior were almost certainly fine with the previous coding, now we
have objective confidence of that.
There are other places that could benefit from this, but that is left
for future work.
Reviewed by Jeff Davis, Heikki Linnakangas, Jian He, Junwang Zhao
Credit to Andres Freund for the idea
Discussion: https://postgr.es/m/20231122223432.lywt4yz2bn7tlp27%40awork3.anarazel.de
All commands accepting arguments, handling them with OT_NORMAL, OT_SQLID
or OT_SQLIDHACK, should call ignore_slash_options() in inactive branch
to scan and discard extra arguments. All the backslash commands that
handle arguments do so, except \bind.
This commit adds the missing ignore_slash_options to \bind's inactive
branch. This inconsistency is a logic bug, however the behavior happens
to be unchanged as any extra arguments are discarded later in
HandleSlashCmds(), so no backpatch is done.
While on it, this adds \bind to the list of backslash commands where
inactive \if branches are checked in the tests for psql.
Reported-by: Jelte Fennema-Nio
Author: Anthonin Bonnefoy
Discussion: https://postgr.es/m/CAGECzQR1+udGKz+FbHiCQ7CWDiF1fCGi2xYuvQUODdMAfJbaLA@mail.gmail.com
This commit adds some notes about the inability to remove superuser
privileges from the bootstrap superuser. This has been blocked
since commit e530be2c5c, but it wasn't intended be a supported
feature before that, either.
In passing, change "bootstrap user" to "bootstrap superuser" in a
couple places.
Author: Yurii Rashkovskii
Reviewed-by: Vignesh C, David G. Johnston
Discussion: https://postgr.es/m/CA%2BRLCQzSx_eTC2Fch0EzeNHD3zFUcPvBYOoB%2BpPScFLch1DEQw%40mail.gmail.com
Masahiko Sawada
Thomas Munro
Alexander Korotkov
Peter Eisentraut
Alvaro Herrera
Michael Paquier
Amit Langote
Nathan Bossart
Daniel Gustafsson
Heikki Linnakangas
David Rowley
Tom Lane
John Naylor