This commit fixes the function of $subject for shared relations. This
feature has been added by e042678. Unfortunately, this new behavior got
removed by 5891c7a when moving statistics to shared memory.
Reported-by: Mitsuru Hinata
Author: Masahiro Ikeda
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada
Discussion: https://postgr.es/m/7cc69f863d9b1bc677544e3accd0e4b4@oss.nttdata.com
Backpatch-through: 15
This new view, wrapped around a SRF, shows some information known about
wait events, as of:
- Name.
- Type (Activity, I/O, Extension, etc.).
- Description.
All the information retrieved comes from wait_event_names.txt, and the
description is the same as the documentation with filters applied to
remove any XML markups. This view is useful when joined with
pg_stat_activity to get the description of a wait event reported.
Custom wait events for extensions are included in the view.
Original idea by Yves Colin.
Author: Bertrand Drouvot
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Tom Lane, Michael
Paquier
Discussion: https://postgr.es/m/0e2ae164-dc89-03c3-cf7f-de86378053ac@gmail.com
A significant chunk of the time on the macos CI task is spent installing
packages using homebrew. The downloads of the packages are cached, but the
installation needs to happen every time. We can't cache the whole homebrew
installation, because it is too large due to pre-installed packages.
Speed this up by installing packages using macports and caching the
installation as .dmg. That's a lot faster than unpacking a tarball.
In addition, don't install llvm - it wasn't enabled when building, so it's
just a waste of time/space.
This substantially speeds up the mac CI time, both in the cold cache and in
the warm cache case (the latter from ~1m20s to ~5s).
It doesn't seem great to have diverging sources of packages for CI between
branches, so backpatch to 15 (where CI was added).
Discussion: https://postgr.es/m/20230805202539.r3umyamsnctysdc7@awork3.anarazel.de
Backpatch: 15-, where CI was added
Commit d2e15083 got rid of the main configure probe and HAVE_FDATASYNC
macro, but we still searched -lrt and -lposix4 for old Solaris systems.
It's in the C library on modern Solaris, as on other supported systems.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://postgr.es/m/CA%2BhUKGLLVx4drdvXats9PxH3eeB%2BE2NkJReJ%2BRGmaOpU%3D9rgEA%40mail.gmail.com
The OAT hooks are added in ALTER TABLE for the following subcommands:
- { ENABLE | DISABLE | [NO] FORCE } ROW LEVEL SECURITY
- { ENABLE | DISABLE } TRIGGER
- { ENABLE | DISABLE } RULE. Note that there was hook for pg_rewrite,
but not for relation ALTER'ed in pg_class.
Tests are added to test_oat_hook for all the subcommand patterns gaining
hooks here. Based on an ask from Legs Mansion.
Discussion: https://postgr.es/m/tencent_083B3850655AC6EE04FA0A400766D3FE8309@qq.com
The source code comment already said that the presence of the field
element_types.domain_default might be a bug in the standard, since it
never made sense there. Indeed, the field is gone in newer versions
of the standard. So just remove it.
Previously, if a specialized comparator found equal datum1 keys,
the "comparetup" function would repeat the comparison on the
datum before proceeding with the unabbreviated first key
and/or additional sort keys.
Move comparing additional sort keys into "tiebreak" functions so
that specialized comparators can call these directly if needed,
avoiding duplicate work.
Reviewed by David Rowley
Discussion: https://postgr.es/m/CAFBsxsGaVfUrjTghpf%3DkDBYY%3DjWx1PN-fuusVe7Vw5s0XqGdGw%40mail.gmail.com
This was disabled in commit 6f80a8d9c due to the lack of support for
handling of pseudoconstant quals assigned to replaced joins in
createplan.c. To re-allow it, this patch adds the support by 1)
modifying the ForeignPath and CustomPath structs so that if they
represent foreign and custom scans replacing a join with a scan, they
store the list of RestrictInfo nodes to apply to the join, as in
JoinPaths, and by 2) modifying create_scan_plan() in createplan.c so
that it uses that list in that case, instead of the baserestrictinfo
list, to get pseudoconstant quals assigned to the join, as mentioned in
the commit message for that commit.
Important item for the release notes: this is non-backwards-compatible
since it modifies the ForeignPath and CustomPath structs, as mentioned
above, and changes the argument lists for FDW helper functions
create_foreignscan_path(), create_foreign_join_path(), and
create_foreign_upper_path().
Richard Guo, with some additional changes by me, reviewed by Nishant
Sharma, Suraj Kharage, and Richard Guo.
Discussion: https://postgr.es/m/CADrsxdbcN1vejBaf8a%2BQhrZY5PXL-04mCd4GDu6qm6FigDZd6Q%40mail.gmail.com
Commit b91dd9de was concerned with a theoretical problem with our
non-atomic condition variable operations. If you stop sleeping, and
then cancel the sleep in a separate step, you might be signaled in
between, and that could be lost. That doesn't matter for callers of
ConditionVariableBroadcast(), but callers of ConditionVariableSignal()
might be upset if a signal went missing like this.
Commit bc971f4025 interacted badly with that logic, because it doesn't
use ConditionVariableSleep(), which would normally put us back in the
wait list. ConditionVariableCancelSleep() would be confused and think
we'd received an extra signal, and try to forward it to another backend,
resulting in wakeup storms.
New idea: ConditionVariableCancelSleep() can just return true if we've
been signaled. Hypothetical users of ConditionVariableSignal() would
then still have a way to deal with rare lost signals if they are
concerned about that problem.
Back-patch to 16, where bc971f4025 arrived.
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/2840876b-4cfe-240f-0a7e-29ffd66711e7%40enterprisedb.com
The new relation extension logic, introduced in 00d1e02be2, could lead to
slowdowns in some scenarios. E.g., when loading narrow rows into a table using
COPY, the caller of RelationGetBufferForTuple() will only request a small
number of pages. Without concurrency, we just extended using pwritev() in that
case. However, if there is *some* concurrency, we switched between extending
by a small number of pages and a larger number of pages, depending on the
number of waiters for the relation extension logic. However, some
filesystems, XFS in particular, do not perform well when switching between
extending files using fallocate() and pwritev().
To avoid that issue, remember the number of prior relation extensions in
BulkInsertState and extend more aggressively if there were prior relation
extensions. That not just avoids the aforementioned slowdown, but also leads
to noticeable performance gains in other situations, primarily due to
extending more aggressively when there is no concurrency. I should have done
it this way from the get go.
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAD21AoDvDmUQeJtZrau1ovnT_smN940=Kp6mszNGK3bq9yRN6g@mail.gmail.com
Backpatch: 16-, where the new relation extension code was added
Currently, the names of the custom wait event must be registered for
each backend, requiring all these to link to the shared memory area of
an extension, even if these are not loaded with
shared_preload_libraries.
This patch relaxes the constraints related to this infrastructure by
storing the wait events and their names in two dynamic hash tables in
shared memory. This has the advantage to simplify the registration of
custom wait events to a single routine call that returns an event ID
ready for consumption:
uint32 WaitEventExtensionNew(const char *wait_event_name);
The caller of this routine can then cache locally the ID returned, to be
used for pgstat_report_wait_start(), WaitLatch() or a similar routine.
The implementation uses two hash tables: one with a key based on the
event name to avoid duplicates and a second using the event ID as key
for event lookups, like on pg_stat_activity. These tables can hold a
minimum of 16 entries, and a maximum of 128 entries, which should be plenty
enough.
The code changes done in worker_spi show how things are simplified (most
of the code removed in this commit comes from there):
- worker_spi_init() is gone.
- No more shared memory hooks required (size requested and
initialization).
- The custom wait event ID is cached in the process that needs to set
it, with one single call to WaitEventExtensionNew() to retrieve it.
Per suggestion from Andres Freund.
Author: Masahiro Ikeda, with a few tweaks from me.
Discussion: https://postgr.es/m/20230801032349.aaiuvhtrcvvcwzcx@awork3.anarazel.de
We deduce a LogicalRepWorker's type from the values of several different
fields ('relid' and 'leader_pid') whenever logic needs to know it.
In fact, the logical replication worker type is already known at the time
of launching the LogicalRepWorker and it never changes for the lifetime of
that process. Instead of deducing the type, it is simpler to just store it
one time, and access it directly thereafter.
Author: Peter Smith
Reviewed-by: Amit Kapila, Bharath Rupireddy
Discussion: http://postgr.es/m/CAHut+PttPSuP0yoZ=9zLDXKqTJ=d0bhxwKaEaNcaym1XqcvDEg@mail.gmail.com
The option causes a measurable slowdown. Macos is, by far, the most expensive
platform for CI, therefore it doesn't make sense to run such a test there.
d3b111e320 used a small segment size for two tasks, one with autoconf, one
with meson. In hindsight that is a bit overkill, it's unlikely that the option
would silently break. Thus don't move the -Dsegsize_blocks=6, just remove
it. I did however change the autoconf test to use 6 instead of 8 blocks, as
long as we allow it, a non-power-of-two test seems like a good idea.
While at it, add a comment explaining why we use a small segment size for CI.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/20230808021541.7lbzdefvma7qmn3w@awork3.anarazel.de
Backpatch: 16-, where d3b111e320 introduced the use of -Dsegsize_blocks=6
RANDOMIZE_ALLOCATED_MEMORY causes a measurable slowdown. Macos is, by far, the
most expensive platform for CI, therefore it doesn't make sense to run such a
test there.
Ubsan and asan on linux should detect most of the the cases of uninitialized
memory, so it doesn't really seem worth using -DRANDOMIZE_ALLOCATED_MEMORY in
another instance type.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/20230808021541.7lbzdefvma7qmn3w@awork3.anarazel.de
Backpatch: 16-, where 89d16b635 added the use of -DRANDOMIZE_ALLOCATED_MEMORY
pg_logical_emit_message(false, '_', repeat('x', 1069547465)) failed with
self-contradictory message "WAL record would be 1069547520 bytes (of
maximum 1069547520 bytes)". There's no particular benefit from allowing
or denying one byte in either direction; XLogRecordMaxSize could rise a
few megabytes without trouble. Hence, this is just for cleanliness.
Back-patch to v16, where this check first appeared.
This relies on the "location" field added to TransactionStmt in 31de7e6,
now applied to the "gid" field used by 2PC commands. These commands are
now reported like:
COMMIT PREPARED $1
PREPARE TRANSACTION $1
ROLLBACK PREPARED $1
Applying constants for these commands is a huge advantage for workloads
that rely a lot on 2PC commands with different GIDs. Some tests are
added to track the new behavior.
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/ZMhT9kNtJJsHw6jK@paquier.xyz
Store function config settings in lists to avoid the need to parse and
allocate for each function execution.
Speedup is modest but significant. Additionally, this change also
seems cleaner and supports some other performance improvements under
discussion.
Discussion: https://postgr.es/m/04c8592dbd694e4114a3ed87139a7a04e4363030.camel@j-davis.com
Reviewed-by: Nathan Bossart
The fix itself is fine, but the test revealed other problems related
to parallel query that are not easily fixable. Remove the test for
now to fix the buildfarm.
Discussion: https://postgr.es/m/88825.1691665432@sss.pgh.pa.us
Backpatch-through: 11
Commit 19d8e2308b changed the list of set-of-columns that can be
returned by RelationGetIndexAttrBitmap, but didn't update its
"documentation". That was pretty hard to read already, so rewrite to
make it more comprehensible, adding the missing values while at it.
Backpatch to 16, like that commit.
Discussion: https://postgr.es/m/20230809091155.7c7f3gttjk3dj4ze@alvherre.pgsql
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
As with the Intel and Arm CRC instructions, compiler intrinsics for
them must be supported by the compiler. In contrast, no runtime check
is needed. Aligned memory access is faster, so use the Arm coding as
a model.
YANG Xudong
Discussion: https://postgr.es/m/b522a0c5-e3b2-99cc-6387-58134fb88cbe%40ymatrix.cn
In-place tablespaces would be dumped with the path produced by
pg_tablespace_location(), which is in this case a relative path built as
pg_tblspc/OID, but this would fail to restore as such tablespaces need
to use an empty string as location. In order to detect if an in-place
tablespace is used, this commit checks if the path returned is relative
and adapts the dump contents in consequence.
Like the other changes related to in-place tablespaces, no backpatch is
done as these are only intended for development purposes. Rui Zhao has
fixed the code, while the test is from me.
Author: Rui Zhao, Michael Paquier
Discussion: https://postgr.es/m/80c80b4a-b87b-456f-bd46-1ae326601d79.xiyuan.zr@alibaba-inc.com
fa88928 has introduced wait_event_names.txt, and some of its entries had
some documentation fields with more information than necessary.
This commit brings back the description of all the wait events to be
consistent with the older stable branches. Five descriptions were
incorrect.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/e378989e-1899-643a-dec1-10f691a0a105@gmail.com
Substituting such values in extension scripts facilitated SQL injection
when @extowner@, @extschema@, or @extschema:...@ appeared inside a
quoting construct (dollar quoting, '', or ""). No bundled extension was
vulnerable. Vulnerable uses do appear in a documentation example and in
non-bundled extensions. Hence, the attack prerequisite was an
administrator having installed files of a vulnerable, trusted,
non-bundled extension. Subject to that prerequisite, this enabled an
attacker having database-level CREATE privilege to execute arbitrary
code as the bootstrap superuser. By blocking this attack in the core
server, there's no need to modify individual extensions. Back-patch to
v11 (all supported versions).
Reported by Micah Gate, Valerie Woolard, Tim Carey-Smith, and Christoph
Berg.
Security: CVE-2023-39417
The use of Memoize was already disabled in normal joins when the join
conditions had volatile functions per the code in
match_opclause_to_indexcol(). Ordinarily, the parameterization for the
inner side of a nested loop will be an Index Scan or at least eventually
lead to an index scan (perhaps nested several joins deep). However, for
lateral joins, that's not the case and seq scans can be parameterized
too, so we can't rely on match_opclause_to_indexcol().
Here we explicitly check the parameterization for volatile functions and
don't consider the generation of a Memoize path when such functions
are present.
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs49nHFnHbpepLsv_yF3qkpCS4BdB-v8HoJVv8_=Oat0u_w@mail.gmail.com
Backpatch-through: 14, where Memoize was introduced
If MERGE executes an UPDATE action on a table with row-level security,
the code incorrectly applied the WITH CHECK clauses from the target
table's INSERT policies to new rows, instead of the clauses from the
table's UPDATE policies. In addition, it failed to check new rows
against the target table's SELECT policies, if SELECT permissions were
required (likely to always be the case).
In addition, if MERGE executes a DO NOTHING action for matched rows,
the code incorrectly applied the USING clauses from the target table's
DELETE policies to existing target tuples. These policies were applied
as checks that would throw an error, if they did not pass.
Fix this, so that a MERGE UPDATE action applies the same RLS policies
as a plain UPDATE query with a WHERE clause, and a DO NOTHING action
does not apply any RLS checks (other than adding clauses from SELECT
policies to the join).
Back-patch to v15, where MERGE was introduced.
Dean Rasheed, reviewed by Stephen Frost.
Security: CVE-2023-39418
If we define ZLIB_CONST before including zlib.h, zlib augments some
interfaces with const decorations. By doing that we can keep our own
interfaces cleaner and can remove some unconstify calls.
ZLIB_CONST was introduced in zlib 1.2.5.2 (17 Dec 2011). When
compiling with older zlib releases, you might now get compiler
warnings about discarding qualifiers.
CentOS 6 has zlib 1.2.3, but in 8e278b6576, we removed support for the
OpenSSL release in CentOS 6, so it seems ok to de-support the zlib
release in CentOS 6 as well.
Reviewed-by: Tristan Partin <tristan@neon.tech>
Discussion: https://www.postgresql.org/message-id/flat/33462926-bb1e-7cc9-8d92-d86318e8ed1d%40eisentraut.org
Alvaro Herrera
Amit Kapila
Michael Paquier
Andres Freund
Peter Eisentraut
Nathan Bossart
Thomas Munro
John Naylor
Etsuro Fujita
Bruce Momjian
Noah Misch
Jeff Davis
David Rowley
Dean Rasheed