The main point of doing this is to allow the cutoff to be set very small,
even zero, to allow parallel-query behavior to be tested on relatively
small tables such as we typically use in the regression tests. But it
might be of use to users too. The number-of-workers scaling behavior in
create_plain_partial_paths() is pretty ad-hoc and subject to change, so
we won't expose anything about that, but the notion of not considering
parallel query at all for tables below size X seems reasonably stable.
Amit Kapila, per a suggestion from me
Discussion: <17170.1465830165@sss.pgh.pa.us>
While beneficial, both for throughput and average/worst case latency, in
a significant number of workloads, there are other workloads in which
backend_flush_after can cause significant performance regressions in
comparison to < 9.6 releases. The regression is most likely when the hot
data set is bigger than shared buffers, but significantly smaller than
the operating system's page cache.
I personally think that the benefit of enabling backend flush control is
considerably bigger than the potential downsides, but a fair argument
can be made that not regressing is more important than improving
performance/latency. As the latter is the consensus, change the default
to 0.
The other settings introduced in 428b1d6b2 do not have the same
potential for regressions, so leave them enabled.
Benchmarks leading up to changing the default have been performed by
Mithun Cy, Ashutosh Sharma and Robert Haas.
Discussion: CAD__OuhPmc6XH=wYRm_+Q657yQE88DakN4=Ybh2oveFasHkoeA@mail.gmail.com
As noted by Andres Freund, we'd accumulated quite a few similar functions
in clauses.c that examine all functions in an expression tree to see if
they satisfy some boolean test. Reduce the duplication by inventing a
function check_functions_in_node() that applies a simple callback function
to each SQL function OID appearing in a given expression node. This also
fixes some arguable oversights; for example, contain_mutable_functions()
did not check aggregate or window functions for mutability. I doubt that
that represents a live bug at the moment, because we don't really consider
mutability for aggregates; but it might someday be one.
I chose to put check_functions_in_node() in nodeFuncs.c because it seemed
like other modules might wish to use it in future. That in turn forced
moving set_opfuncid() et al into nodeFuncs.c, as the alternative was for
nodeFuncs.c to depend on optimizer/setrefs.c which didn't seem very clean.
In passing, teach contain_leaked_vars_walker() about a few more expression
node types it can safely look through, and improve the rather messy and
undercommented code in has_parallel_hazard_walker().
Discussion: <20160527185853.ziol2os2zskahl7v@alap3.anarazel.de>
Since indexes are created without valid LSNs, an index created
while a snapshot older than old_snapshot_threshold existed could
cause queries to return incorrect results when those old snapshots
were used, if any relevant rows had been subject to early pruning
before the index was built. Prevent usage of a newly created index
until all such snapshots are released, for relations where this can
happen.
Questions about the interaction of "snapshot too old" with index
creation were initially raised by Andres Freund.
Reviewed by Robert Haas.
Transmit the leader's temp-namespace state to workers. This is important
because without it, the workers do not really have the same search path
as the leader. For example, there is no good reason (and no extant code
either) to prevent a worker from executing a temp function that the
leader created previously; but as things stood it would fail to find the
temp function, and then either fail or execute the wrong function entirely.
We still prohibit a worker from creating a temp namespace on its own.
In effect, a worker can only see the session's temp namespace if the leader
had created it before starting the worker, which seems like the right
semantics.
Also, transmit the leader's BackendId to workers, and arrange for workers
to use that when determining the physical file path of a temp relation
belonging to their session. While the original intent was to prevent such
accesses entirely, there were a number of holes in that, notably in places
like dbsize.c which assume they can safely access temp rels of other
sessions anyway. We might as well get this right, as a small down payment
on someday allowing workers to access the leader's temp tables. (With
this change, directly using "MyBackendId" as a relation or buffer backend
ID is deprecated; you should use BackendIdForTempRelations() instead.
I left a couple of such uses alone though, as they're not going to be
reachable in parallel workers until we do something about localbuf.c.)
Move the thou-shalt-not-access-thy-leader's-temp-tables prohibition down
into localbuf.c, which is where it actually matters, instead of having it
in relation_open(). This amounts to recognizing that access to temp
tables' catalog entries is perfectly safe in a worker, it's only the data
in local buffers that is problematic.
Having done all that, we can get rid of the test in has_parallel_hazard()
that says that use of a temp table's rowtype is unsafe in parallel workers.
That test was unduly expensive, and if we really did need such a
prohibition, that was not even close to being a bulletproof guard for it.
(For example, any user-defined function executed in a parallel worker
might have attempted such access.)
This terminology provoked widespread complaints. So, instead, rename
the GUC max_parallel_degree to max_parallel_workers_per_gather
(leaving room for a possible future GUC max_parallel_workers that acts
as a system-wide limit), and rename the parallel_degree reloption to
parallel_workers. Rename structure members to match.
These changes create a dump/restore hazard for users of PostgreSQL
9.6beta1 who have set the reloption (or applied the GUC using ALTER
USER or ALTER DATABASE).
This commit reverts 137805f89 as well as the associated commits 015e88942,
5306df283, and 68d704edb. We found multiple bugs in this feature, and
there was concern about possible planner slowdown (though to be fair,
exhibiting a very large slowdown proved difficult). The way forward
requires a considerable rewrite, which may or may not be possible to
accomplish in time for beta2. In my judgment reviewing the rewrite will
be easier to accomplish starting from a clean slate, so let's temporarily
revert what's there now. This also leaves us in a safe state if it turns
out to be necessary to postpone the rewrite to the next development cycle.
Discussion: <20160429102531.GA13701@huehner.biz>
This attempts to buy back some of whatever performance we lost from fixing
bug #14174 by inlining the initial checks in MakeExpandedObjectReadOnly()
into the callers. We can do that in a macro without creating multiple-
evaluation hazards, so it's pretty much free notationally; and the amount
of code added to callers should be minimal as well. (Testing a value can't
take many more instructions than passing it to a subroutine.)
Might as well inline DatumIsReadWriteExpandedObject() while we're at it.
This is an ABI break for callers, so it doesn't seem safe to put into 9.5,
but I see no reason not to do it in HEAD.
The "snapshot too old" condition was not being recognized when
using a copied snapshot, since the original timestamp and lsn were
not being passed along. Noticed when testing the combination of
"snapshot too old" with parallel query execution.
Mostly these are just comments but there are a few in documentation
and a handful in code and tests. Hopefully this doesn't cause too much
unnecessary pain for backpatching. I relented from some of the most
common like "thru" for that reason. The rest don't seem numerous
enough to cause problems.
Thanks to Kevin Lyda's tool https://pypi.python.org/pypi/misspellings
If both timeout indicators are set when we arrive at ProcessInterrupts,
we've historically just reported "lock timeout". However, some buildfarm
members have been observed to fail isolationtester's timeouts test by
reporting "lock timeout" when the statement timeout was expected to fire
first. The cause seems to be that the process is allowed to sleep longer
than expected (probably due to heavy machine load) so that the lock
timeout happens before we reach the point of reporting the error, and
then this arbitrary tiebreak rule does the wrong thing. We can improve
matters by comparing the scheduled timeout times to decide which error
to report.
I had originally proposed greatly reducing the 1-second window between
the two timeouts in the test cases. On reflection that is a bad idea,
at least for the case where the lock timeout is expected to fire first,
because that would assume that it takes negligible time to get from
statement start to the beginning of the lock wait. Thus, this patch
doesn't completely remove the risk of test failures on slow machines.
Empirically, however, the case this handles is the one we are seeing
in the buildfarm. The explanation may be that the other case requires
the scheduler to take the CPU away from a busy process, whereas the
case fixed here only requires the scheduler to not give the CPU back
right away to a process that has been woken from a multi-second sleep
(and, perhaps, has been swapped out meanwhile).
Back-patch to 9.3 where the isolationtester timeouts test was added.
Discussion: <8693.1464314819@sss.pgh.pa.us>
subquery_planner() failed to apply expression preprocessing to the
arbiterElems and arbiterWhere fields of an OnConflictExpr. No doubt the
theory was that this wasn't necessary because we don't actually try to
execute those expressions; but that's wrong, because it results in failure
to match to index expressions or index predicates that are changed at all
by preprocessing. Per bug #14132 from Reynold Smith.
Also add pullup_replace_vars processing for onConflictWhere. Perhaps
it's impossible to have a subquery reference there, but I'm not exactly
convinced; and even if true today it's a failure waiting to happen.
Also add some comments to other places where one or another field of
OnConflictExpr is intentionally ignored, with explanation as to why it's
okay to do so.
Also, catalog/dependency.c failed to record any dependency on the named
constraint in ON CONFLICT ON CONSTRAINT, allowing such a constraint to
be dropped while rules exist that depend on it, and allowing pg_dump to
dump such a rule before the constraint it refers to. The normal execution
path managed to error out reasonably for a dangling constraint reference,
but ruleutils.c dumped core; so in addition to fixing the omission, add
a protective check in ruleutils.c, since we can't retroactively add a
dependency in existing databases.
Back-patch to 9.5 where this code was introduced.
Report: <20160510190350.2608.48667@wrigleys.postgresql.org>
Limit maintenance of time to xid mapping to once per minute. At
least in the tested case this brings performance within 5% of when
the feature is off, compared to several times slower without this
patch.
While there, fix comments and whitespace.
Ants Aasma, with cosmetic adjustments suggested by Andres Freund
Reviewed by Kevin Grittner and Andres Freund
This new limit affects both the max_parallel_degree GUC and the
parallel_degree reloption. There may some day be a use case for using
more than 1024 CPUs for a single query, but that's surely not the case
right now. Not only do not very many people have that many CPUs, but
the code hasn't been tested at that kind of scale and is very unlikely
to perform well, or even work at all, without a lot more work. The
issue addressed by commit 06bd458cb8 is
probably just one problem of many.
The idea of a more reasonable limit here was suggested by Tom Lane;
the value of 1024 was suggested by Amit Kapila.
to_timestamp() handles the TH/th format codes by advancing over two input
characters, whatever those are. It failed to notice whether there were
two characters available to be skipped, making it possible to advance
the pointer past the end of the input string and keep on parsing.
A similar risk existed in the handling of "Y,YYY" format: it would advance
over three characters after the "," whether or not three characters were
available.
In principle this might be exploitable to disclose contents of server
memory. But the security team concluded that it would be very hard to use
that way, because the parsing loop would stop upon hitting any zero byte,
and TH/th format codes can't be consecutive --- they have to follow some
other format code, which would have to match whatever data is there.
So it seems impractical to examine memory very much beyond the end of the
input string via this bug; and the input string will always be in local
memory not in disk buffers, making it unlikely that anything very
interesting is close to it in a predictable way. So this doesn't quite
rise to the level of needing a CVE.
Thanks to Wolf Roediger for reporting this bug.
Hash indexes are not WAL-logged, and so do not maintain the LSN of
index pages. Since the "snapshot too old" feature counts on
detecting error conditions using the LSN of a table and all indexes
on it, this makes it impossible to safely do early vacuuming on any
table with a hash index, so add this to the tests for whether the
xid used to vacuum a table can be adjusted based on
old_snapshot_threshold.
While at it, add a paragraph to the docs for old_snapshot_threshold
which specifically mentions this and other aspects of the feature
which may otherwise surprise users.
Problem reported and patch reviewed by Amit Kapila
The similarity of the original names to SQL keywords seems like a bad
idea. Rename them before we're stuck with 'em forever.
In passing, minor code and docs cleanup.
Discussion: <4875.1462210058@sss.pgh.pa.us>
Commit 7d9a4737c2 greatly improved the
accuracy of the numeric transcendental functions, however it failed to
consider the case where the result from pow() is close to the overflow
threshold, for example 0.12 ^ -2345.6. For such inputs, where the
result has more than 2000 digits before the decimal point, the decimal
result weight estimate was being clamped to 2000, leading to a loss of
precision in the final calculation.
Fix this by replacing the clamping code with an overflow test that
aborts the calculation early if the final result is sure to overflow,
based on the overflow limit in exp_var(). This provides the same
protection against integer overflow in the subsequent result scale
computation as the original clamping code, but it also ensures that
precision is never lost and saves compute cycles in cases that are
sure to overflow.
The new early overflow test works with the initial low-precision
result (expected to be accurate to around 8 significant digits) and
includes a small fuzz factor to ensure that it doesn't kick in for
values that would not overflow exp_var(), so the overall overflow
threshold of pow() is unchanged and consistent for all inputs with
non-integer exponents.
Author: Dean Rasheed
Reviewed-by: Tom Lane
Discussion: http://www.postgresql.org/message-id/CAEZATCUj3U-cQj0jjoia=qgs0SjE3auroxh8swvNKvZWUqegrg@mail.gmail.com
See-also: http://www.postgresql.org/message-id/CAEZATCV7w+8iB=07dJ8Q0zihXQT1semcQuTeK+4_rogC_zq5Hw@mail.gmail.com
Conversion functions were previously marked as parallel-unsafe, since
that is the default, but in fact they are safe. Parallel-safe
functions defined in pg_proc.h and redefined in system_views.sql were
ending up as parallel-unsafe because the redeclarations were not
marked PARALLEL SAFE. While editing system_views.sql, mark ts_debug()
parallel safe also.
Andreas Karlsson
These adjustments adjust code and comments in minor ways to prevent
pgindent from mangling them. Among other things, I tried to avoid
situations where pgindent would emit "a +b" instead of "a + b", and I
tried to avoid having it break up inline comments across multiple
lines.
Without a few entries beyond old_snapshot_threshold, the lookup
would often fail, resulting in the more aggressive pruning or
vacuum being skipped often enough to matter. This was very clearly
shown by a python test script posted by Ants Aasma, and was likely
a factor in an earlier but somewhat less clear-cut test case posted
by Jeff Janes.
This patch makes no change to the logic, per se -- it just makes
the array of mapping entries big enough to make lookup misses based
on timing much less likely. An occasional miss is still possible
if a thread stalls for more than 10 minutes, but that does not
create any problem with correctness of behavior. Besides, if
things are so busy that a thread is stalling for more than 10
minutes, it is probably OK to skip the more aggressive cleanup at
that particular point in time.
Commit 989be0810d added a flex/bison lexer/parser to interpret
synchronous_standby_names. It was done in a pretty crufty way, though,
making assorted end-use sites responsible for calling the parser at the
right times. That was not only vulnerable to errors of omission, but made
it possible that lexer/parser errors occur at very undesirable times,
and created memory leakages even if there was no error.
Instead, perform the parsing once during check_synchronous_standby_names
and let guc.c manage the resulting data. To do that, we have to flatten
the parsed representation into a single hunk of malloc'd memory, but that
is not very hard.
While at it, work a little harder on making useful error reports for
parsing problems; the previous code felt that "synchronous_standby_names
parser returned 1" was an appropriate user-facing error message. (To
be fair, it did also log a syntax error message, but separately from the
GUC problem report, which is at best confusing.) It had some outright
bugs in the face of invalid input, too.
I (tgl) also concluded that we need to restrict unquoted names in
synchronous_standby_names to be just SQL identifiers. The previous coding
would accept darn near anything, which (1) makes the quoting convention
both nearly-unnecessary and formally ambiguous, (2) makes it very hard to
understand what is a syntax error and what is a creative interpretation of
the input as a standby name, and (3) makes it impossible to further extend
the syntax in future without a compatibility break. I presume that we're
intending future extensions of the syntax, else this parsing infrastructure
is massive overkill, so (3) is an important objection. Since we've taken
a compatibility hit for non-identifier names with this change anyway, we
might as well lock things down now and insist that users use double quotes
for standby names that aren't identifiers.
Kyotaro Horiguchi and Tom Lane
The way that PartialAggregate and FinalizeAggregate plan nodes were
displaying output columns before was bogus. Now, FinalizeAggregate
produces the same outputs as an Aggregate would have produced, while
PartialAggregate produces each of those outputs prefixed by the word
PARTIAL.
Discussion: 12585.1460737650@sss.pgh.pa.us
Patch by me, reviewed by David Rowley.
So far, when a transaction with pending invalidations, but without an
assigned xid, committed, we simply ignored those invalidation
messages. That's problematic, because those are actually sent for a
reason.
Known symptoms of this include that existing sessions on a hot-standby
replica sometimes fail to notice new concurrently built indexes and
visibility map updates.
The solution is to WAL log such invalidations in transactions without an
xid. We considered to alternatively force-assign an xid, but that'd be
problematic for vacuum, which might be run in systems with few xids.
Important: This adds a new WAL record, but as the patch has to be
back-patched, we can't bump the WAL page magic. This means that standbys
have to be updated before primaries; otherwise
"PANIC: standby_redo: unknown op code 32" errors can be encountered.
XXX:
Reported-By: Васильев Дмитрий, Masahiko Sawada
Discussion:
CAB-SwXY6oH=9twBkXJtgR4UC1NqT-vpYAtxCseME62ADwyK5OA@mail.gmail.comCAD21AoDpZ6Xjg=gFrGPnSn4oTRRcwK1EBrWCq9OqOHuAcMMC=w@mail.gmail.com
The true explanation for Peter Eisentraut's report of inexact asind results
seems to be that (a) he's compiling into x87 instruction set, which uses
wider-than-double float registers, plus (b) the library function asin() on
his platform returns a result that is wider than double and is not rounded
to double width. To fix, we have to force the function's result to be
rounded comparably to what happened to the scaling constant asin_0_5.
Experimentation suggests that storing it into a volatile local variable is
the least ugly way of making that happen. Although only asin() is known to
exhibit an observable inexact result, we'd better do this in all the places
where we're hoping to get an exact result by scaling.
Change max_parallel_degree default from 0 to 2. It is possible that
this is not a good idea, or that we should go with 1 worker rather
than 2, but we won't find out without trying it. Along the way,
reword the documentation for max_parallel_degree a little bit to
hopefully make it more clear.
Discussion: 20160420174631.3qjjhpwsvvx5bau5@alap3.anarazel.de
Commit 65abaab547 tried to prevent the scaling constants used in
the degree-based trig functions from being precomputed at compile time,
because some compilers do that with functions that don't yield results
identical-to-the-last-bit to what you get at runtime. A report from
Peter Eisentraut suggests that some recent compilers are smart enough
to see through that trick, though. Instead, let's put the inputs to
these calculations into non-const global variables, which should be a
more reliable way of convincing the compiler that it can't assume that
they are compile-time constants. (If we really get desperate, we could
mark these variables "volatile", but I do not believe we should have to.)
Several issues:
1) checkpoint_flush_after doc and code disagreed about the default
2) new GUCs were missing from postgresql.conf.sample
3) Outdated source-code comment about bgwriter_flush_after's default
4) Sub-optimal categories assigned to new GUCs
5) Docs suggested backend_flush_after is PGC_SIGHUP, but it's PGC_USERSET.
6) Spell out int as integer in the docs, as done elsewhere
Reported-By: Magnus Hagander, Fujii Masao
Discussion: CAHGQGwETyTG5VYQQ5C_srwxWX7RXvFcD3dKROhvAWWhoSBdmZw@mail.gmail.com
NetBSD has seen fit to invent a libc function named strtoi(), which
conflicts with the long-established static functions of the same name in
datetime.c and ecpg's interval.c. While muttering darkly about intrusions
on application namespace, we'll rename our functions to avoid the conflict.
Back-patch to all supported branches, since this would affect attempts
to build any of them on recent NetBSD.
Thomas Munro
When we shoehorned "x op ANY (array)" into the SQL syntax, we created a
fundamental ambiguity as to the proper treatment of a sub-SELECT on the
righthand side: perhaps what's meant is to compare x against each row of
the sub-SELECT's result, or perhaps the sub-SELECT is meant as a scalar
sub-SELECT that delivers a single array value whose members should be
compared against x. The grammar resolves it as the former case whenever
the RHS is a select_with_parens, making the latter case hard to reach ---
but you can get at it, with tricks such as attaching a no-op cast to the
sub-SELECT. Parse analysis would throw away the no-op cast, leaving a
parsetree with an EXPR_SUBLINK SubLink directly under a ScalarArrayOpExpr.
ruleutils.c was not clued in on this fine point, and would naively emit
"x op ANY ((SELECT ...))", which would be parsed as the first alternative,
typically leading to errors like "operator does not exist: text = text[]"
during dump/reload of a view or rule containing such a construct. To fix,
emit a no-op cast when dumping such a parsetree. This might well be
exactly what the user wrote to get the construct accepted in the first
place; and even if she got there with some other dodge, it is a valid
representation of the parsetree.
Per report from Karl Czajkowski. He mentioned only a case involving
RLS policies, but actually the problem is very old, so back-patch to
all supported branches.
Report: <20160421001832.GB7976@moraine.isi.edu>
Also, avoid reading PGPROC's wait_event field twice, once for the wait
event and again for the wait_event_type, because the value might change
in the middle.
Petr Jelinek and Robert Haas
It was incorrectly declared as a volatile pointer to a non-volatile
structure. Eliminate the OldSnapshotControl struct definition; it
is really not needed. Pointed out by Tom Lane.
While at it, add OldSnapshotControlData to pgindent's list of
structures.
Coverity complained about an apparent missing "break" in a switch
added by bb140506df. The human-readable comments are pretty
clear that this is intentional, but add a standard /* FALL THRU */
comment to make it clear to tools too.
This creates an initial set of default roles which administrators may
use to grant access to, historically, superuser-only functions. Using
these roles instead of granting superuser access reduces the number of
superuser roles required for a system. Documention for each of the
default roles has been added to user-manag.sgml.
Bump catversion to 201604082, as we had a commit that bumped it to
201604081 and another that set it back to 201604071...
Reviews by José Luis Tallón and Robert Haas
This will prevent users from creating roles which begin with "pg_" and
will check for those roles before allowing an upgrade using pg_upgrade.
This will allow for default roles to be provided at initdb time.
Reviews by José Luis Tallón and Robert Haas
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
