WAL senders sending logically-decoded data fail to properly report in
"streaming" state when starting up, hence as long as one extra record is
not replayed, such WAL senders would remain in a "catchup" state, which
is inconsistent with the physical cousin.
This can be easily reproduced by for example using pg_recvlogical and
restarting the upstream server. The TAP tests have been slightly
modified to detect the failure and strengthened so as future tests also
make sure that a node is in streaming state when waiting for its
catchup.
Backpatch down to 9.4 where this code has been introduced.
Reported-by: Sawada Masahiko
Author: Simon Riggs, Sawada Masahiko
Reviewed-by: Petr Jelinek, Michael Paquier, Vaishnavi Prabakaran
Discussion: https://postgr.es/m/CAD21AoB2ZbCCqOx=bgKMcLrAvs1V0ZMqzs7wBTuDySezTGtMZA@mail.gmail.com
Explain the difference between "make check" and "make installcheck".
Mention the need for --enable-tap-tests (only some of these did so
before). Standardize their wording about how to run the tests.
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
We need to wait for the initial sync of all subscriptions. On
some (faster?) machines, this didn't make a difference, but
the (slower?) buildfarm machines are upset.
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
In the pgoutput plugin, skip changes for relations that are not
publishable, per is_publishable_class(). This concerns in particular
materialized views and information_schema tables. While those relations
cannot be part of a publication, per existing checks, they will be
considered by a FOR ALL TABLES publication. A subscription would not
actually apply changes for those relations, again per existing checks,
but trying to match incoming changes to local tables on the subscriber
would lead to errors if no matching local table exists. Skipping those
changes on the publisher avoids sending useless changes and eliminates
the error.
Bug: #15044
Reported-by: Chad Trabant <chad@iris.washington.edu>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Investigation of 2d2d06b7e2 revealed that
identity values were not applied in some further cases, including
logical replication subscribers, VALUES RTEs, and ALTER TABLE ... ADD
COLUMN. To fix all that, apply the identity column expression in
build_column_default() instead of repeating the same logic at each call
site.
For ALTER TABLE ... ADD COLUMN ... IDENTITY, the previous coding
completely ignored that existing rows for the new column should have
values filled in from the identity sequence. The coding using
build_column_default() fails for this because the sequence ownership
isn't registered until after ALTER TABLE, and we can't do it before
because we don't have the column in the catalog yet. So we specially
remember in ColumnDef the sequence name that we decided on and build a
custom NextValueExpr using that.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
This was nearly the same code. Extend wait_for_catchup to allow waiting
for pg_current_wal_lsn() and use that in the subscription tests. Also
change one use in the pg_rewind tests to use this.
Also remove some broken code in wait_for_catchup and
wait_for_slot_catchup. The error message in case the waiting failed
wanted to show the current LSN, but the way it was written never
worked. So since nobody ever cared, just remove it.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
When a publisher table has fewer columns than a subscriber, the update
of a row on the publisher should result in updating of only the columns
in common. The previous coding mistakenly reset the values of
additional columns on the subscriber to NULL because it failed to skip
updates of columns not found in the attribute map.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
A FOR ALL TABLES publication naturally considers all base tables to be a
candidate for replication. This includes transient heaps that are
created during a table rewrite during DDL. This causes failures on the
subscriber side because it will not have a table like pg_temp_16386 to
receive data (and if it did, it would be the wrong table).
The prevent this problem, we filter out any tables that match this
naming pattern and match an actual table from FOR ALL TABLES
publications. This is only a heuristic, meaning that user tables that
match that naming could accidentally be omitted. A more robust solution
might require an explicit marking of such tables in pg_class somehow.
Reported-by: yxq <yxq@o2.pl>
Bug: #14785
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
005_encoding.pl neglected to wait for the subscriber's initial
synchronization to happen. While we have not seen this fail in
the buildfarm, it's pretty easy to demonstrate there's an issue
by hacking logicalrep_worker_launch() to fail most of the time.
Michael Paquier
Discussion: https://postgr.es/m/27032.1505749806@sss.pgh.pa.us
When ALTER SUBSCRIPTION DISABLE is run in the same transaction before
DROP SUBSCRIPTION, the latter will hang because workers will still be
running, not having seen the DISABLE committed, and DROP SUBSCRIPTION
will wait until the workers have vacated the replication origin slots.
Previously, DROP SUBSCRIPTION killed the logical replication workers
immediately only if it was going to drop the replication slot, otherwise
it scheduled the worker killing for the end of the transaction, as a
result of 7e174fa793. This, however,
causes the present problem. To fix, kill the workers immediately in all
cases. This covers all cases: A subscription that doesn't have a
replication slot must be disabled. It was either disabled in the same
transaction, or it was already disabled before the current transaction,
but then there shouldn't be any workers left and this won't make a
difference.
Reported-by: Arseny Sher <a.sher@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/87mv6av84w.fsf%40ars-thinkpad
This would lead to failures if local and remote tables have a different
column order. The tests previously didn't catch that because they only
tested the initial data copy. So add another test that exercises the
apply worker.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
The comparison with the target rows on the subscriber side was done with
datumIsEqual(), which can have false negatives. For instance, it didn't
work reliably for text columns. So use the equality operator provided
by the type cache instead.
Also add more user documentation about replica identity requirements.
Reported-by: Tatsuo Ishii <ishii@sraoss.co.jp>
There was a grammar ambiguity between SET PUBLICATION name REFRESH and
SET PUBLICATION SKIP REFRESH, because SKIP is not a reserved word. To
resolve that, fold the refresh choice into the WITH options. Refreshing
is the default now.
Reported-by: tushar <tushar.ahuja@enterprisedb.com>
Logical replication supports replicating between tables with different
column order. But this failed for the initial table sync because of a
logic error in how the column list for the internal COPY command was
composed. Fix that and also add a test.
Also fix a minor omission in the column name mapping cache. When
creating the mapping list, it would not skip locally dropped columns.
So if a remote column had the same name as a locally dropped
column (...pg.dropped...), then the expected error would not occur.
For CREATE/ALTER PUBLICATION/SUBSCRIPTION, use similar option style as
other statements that use a WITH clause for options.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Per discussion, "location" is a rather vague term that could refer to
multiple concepts. "LSN" is an unambiguous term for WAL locations and
should be preferred. Some function names, view column names, and function
output argument names used "lsn" already, but others used "location",
as well as yet other terms such as "wal_position". Since we've already
renamed a lot of things in this area from "xlog" to "wal" for v10,
we may as well incur a bit more compatibility pain and make these names
all consistent.
David Rowley, minor additional docs hacking by me
Discussion: https://postgr.es/m/CAKJS1f8O0njDKe8ePFQ-LK5-EjwThsDws6ohJ-+c6nWK+oUxtg@mail.gmail.com
It turned out this approach had problems, because a DROP command should
not have any options other than CASCADE and RESTRICT. Instead, always
attempt to drop the slot if there is one configured, but also add an
ALTER SUBSCRIPTION action to set the slot to NONE.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/29431.1493730652@sss.pgh.pa.us
Before restarting a tablesync worker for the same relation, wait
wal_retrieve_retry_interval (currently 5s by default). This avoids
restarting failing workers in a tight loop.
We keep the last start times in a hash table last_start_times that is
separate from the table_states list, because that list is cleared out on
syscache invalidation, which happens whenever a table finishes syncing.
The hash table is kept until all tables have finished syncing.
A future project might be to unify these two and keep everything in one
data structure, but for now this is a less invasive change to accomplish
the original purpose.
For the test suite, set wal_retrieve_retry_interval to its minimum
value, to not increase the test suite run time.
Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
When sending a tuple attribute, the previous coding erroneously sent the
length byte before encoding conversion, which would lead to protocol
failures on the receiving side if the length did not match the following
string.
To fix that, use pq_sendcountedtext() for sending tuple attributes,
which takes care of all of that internally. To match the API of
pq_sendcountedtext(), send even text values without a trailing zero byte
and have the receiving end put it in place instead. This matches how
the standard FE/BE protocol behaves.
Reported-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Add functionality for a new subscription to copy the initial data in the
tables and then sync with the ongoing apply process.
For the copying, add a new internal COPY option to have the COPY source
data provided by a callback function. The initial data copy works on
the subscriber by receiving COPY data from the publisher and then
providing it locally into a COPY that writes to the destination table.
A WAL receiver can now execute full SQL commands. This is used here to
obtain information about tables and publications.
Several new options were added to CREATE and ALTER SUBSCRIPTION to
control whether and when initial table syncing happens.
Change pg_dump option --no-create-subscription-slots to
--no-subscription-connect and use the new CREATE SUBSCRIPTION
... NOCONNECT option for that.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Tested-by: Erik Rijkers <er@xs4all.nl>
Commit f82ec32ac3 renamed the pg_xlog
directory to pg_wal. To make things consistent, and because "xlog" is
terrible terminology for either "transaction log" or "write-ahead log"
rename all SQL-callable functions that contain "xlog" in the name to
instead contain "wal". (Note that this may pose an upgrade hazard for
some users.)
Similarly, rename the xlog_position argument of the functions that
create slots to be called wal_position.
Discussion: https://www.postgresql.org/message-id/CA+Tgmob=YmA=H3DbW1YuOXnFVgBheRmyDkWcD9M8f=5bGWYEoQ@mail.gmail.com
Magnus Hagander
Noah Misch
Alvaro Herrera
Michael Paquier
Tom Lane
Peter Eisentraut
Teodor Sigaev
Bruce Momjian
Robert Haas