In theory, the second px_find_digest call in px_crypt_md5 could fail
even though the first one succeeded, since resource allocation is
required. Don't skip testing for a failure. (If one did happen,
the likely result would be a crash rather than clean recovery from
an OOM failure.)
The code's been like this all along, so back-patch to all supported
branches.
Daniel Gustafsson
Discussion: https://postgr.es/m/AA8D6FE9-4AB2-41B4-98CB-AE64BA668C03@yesql.se
Commit 32a9c0bdf introduced connection retry logic into postgres_fdw.
Previously it used goto statement for retry. This commit gets rid of that
goto from the logic to make the code simpler and easier-to-read.
When getting out of PG_CATCH() for the retry, the error state should be
cleaned up and the memory context should be reset. But commit 32a9c0bdf
forgot to do that. This commit also fixes this bug.
Previously only PQstatus()==CONNECTION_BAD was verified to detect
connection failure. But this could cause false detection in the case where
any error other than connection failure (e.g., out-of-memory) was thrown
after a broken connection was detected in libpq and CONNECTION_BAD is set.
To fix this issue, this commit changes the logic so that it also checks
the error's sqlstate is ERRCODE_CONNECTION_FAILURE.
Author: Fujii Masao
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/2943611.1602375376@sss.pgh.pa.us
A number of places were using appendStringInfo() when they could have been
using appendStringInfoString() instead. While there's no functionality
change there, it's just more efficient to use appendStringInfoString()
when no formatting is required. Likewise for some
appendStringInfoString() calls which were just appending a single char.
We can just use appendStringInfoChar() for that.
Additionally, many places were using appendPQExpBuffer() when they could
have used appendPQExpBufferStr(). Change those too.
Patch by Zhijie Hou, but further searching by me found significantly more
places that deserved the same treatment.
Author: Zhijie Hou, David Rowley
Discussion: https://postgr.es/m/cb172cf4361e4c7ba7167429070979d4@G08CNEXMBPEKD05.g08.fujitsu.local
FDWs that can perform an UPDATE/DELETE remotely using the "direct modify"
set of APIs need to access the ResultRelInfo of the target table. That's
currently available in EState.es_result_relation_info, but the next
commit will remove that field.
This commit adds a new resultRelation field in ForeignScan, to store the
target relation's RT index, and the corresponding ResultRelInfo in
ForeignScanState. The FDW's PlanDirectModify callback is expected to set
'resultRelation' along with 'operation'. The core code doesn't need them
for anything, they are for the convenience of FDW's Begin- and
IterateDirectModify callbacks.
Authors: Amit Langote, Etsuro Fujita
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqGEmiib8FLiHMhKB%2BCH5dRgHSLc5N5wnvc4kym%2BZYpQEQ%40mail.gmail.com
The test cases added by that commit were trying to test the exact number of
times a particular transaction has spilled. However, that number can vary if
any background transaction (say by autovacuum) happens in parallel to the main
transaction. So let's not try to verify the exact count.
Author: Amit Kapila
Reviewed-by: Sawada Masahiko
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
Buildfarm member lorikeet is still failing the test from commit
32a9c0bdf, but now it's down to the should-have-foreseen-it problem
that the error message isn't what the expected-output file expects.
Let's see if we can get stable results by printing just the SQLSTATE.
I believe we'll reliably see ERRCODE_CONNECTION_FAILURE, since
pgfdw_report_error() will report that for any libpq-originated error.
There may be a better way to do this, but I'd like to get the
buildfarm back to green before we discuss further improvements.
Discussion: https://postgr.es/m/E1kPc9v-0005L4-2l@gemulon.postgresql.org
Discussion: https://postgr.es/m/2621622.1602184554@sss.pgh.pa.us
In postgres_fdw, once remote connections are established, they are cached
and re-used for subsequent queries and transactions. There can be some
cases where those cached connections are unavaiable, for example,
by the restart of remote server. In these cases, previously an error was
reported and the query accessing to remote server failed if new remote
transaction failed to start because the cached connection was broken.
This commit improves postgres_fdw so that new connection is remade
if broken connection is detected when starting new remote transaction.
This is useful to avoid unnecessary failure of queries when connection is
broken but can be reestablished.
Author: Bharath Rupireddy, tweaked a bit by Fujii Masao
Reviewed-by: Ashutosh Bapat, Tatsuhito Kasahara, Fujii Masao
Discussion: https://postgr.es/m/CALj2ACUAi23vf1WiHNar_LksM9EDOWXcbHCo-fD4Mbr1d=78YQ@mail.gmail.com
PX_OWN_ALLOC was intended as a way to disable the use of palloc(), and
over the time new palloc() or equivalent calls have been added like in
32984d8, making this extra layer losing its original purpose. This
simplifies on the way some code paths to use palloc0() rather than
palloc() followed by memset(0).
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/A5BFAA1A-B2E8-4CBC-895E-7B1B9475A527@yesql.se
You can use this to view the contents of the time to XID mapping
which the server maintains when old_snapshot_threshold != -1.
Being able to view that information may be interesting for users,
and it's definitely useful for figuring out whether the mapping
is being maintained correctly. It isn't, so that will need to be
fixed in a subsequent commit.
Patch by me, reviewed by Thomas Munro, Dilip Kumar, Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmoY=aqf0zjTD+3dUWYkgMiNDegDLFjo+6ze=Wtpik+3XqA@mail.gmail.com
According to buildfarm member sungazer, the behavior of VACUUM can be
unstable in these tests even if we prevent autovacuum from running on
the tables in question, apparently because even a manual vacuum can
behave differently depending on whether anything else is running that
holds back the global xmin. So use a temporary table instead, which
as of commit a7212be8b9 enables
vacuuming using a more aggressive cutoff.
This approach can't be used for the regression test that involves a
materialized view, but that test doesn't run vacuum, so it shouldn't
be prone to this particular failure mode.
Analysis by Tom Lane. Patch by Ashutosh Sharma and me.
Discussion: http://postgr.es/m/665524.1599948007@sss.pgh.pa.us
This feature has been a thorn in our sides for a long time, causing
many grammatical ambiguity problems. It doesn't seem worth the
pain to continue to support it, so remove it.
There are some follow-on improvements we can make in the grammar,
but this commit only removes the bare minimum number of productions,
plus assorted backend support code.
Note that pg_dump and psql continue to have full support, since
they may be used against older servers. However, pg_dump warns
about postfix operators. There is also a check in pg_upgrade.
Documentation-wise, I (tgl) largely removed the "left unary"
terminology in favor of saying "prefix operator", which is
a more standard and IMO less confusing term.
I included a catversion bump, although no initial catalog data
changes here, to mark the boundary at which oprkind = 'r'
stopped being valid in pg_operator.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
The "!" operator is our only built-in postfix operator. Remove it,
on the way to removal of grammar support for postfix operators.
There is also a "!!" prefix operator, but since it's been marked
deprecated for most of its existence, we might as well remove it too.
Also zap the SQL alias function numeric_fac(), which seems to have
equally little reason to live.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
Commit d114cc53 overlooked the fact that pg_upgrade'd B-Tree indexes
have leaf page high keys whose offset numbers do not match the one from
the copy of the tuple one level up (the copy stored with a downlink for
leaf page's right sibling page). This led to false positive reports of
corruption from bt_index_parent_check() when it was called to verify a
pg_upgrade'd index.
To fix, skip comparing the offset number on pg_upgrade'd B-Tree indexes.
Author: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Andrew Bille <andrewbille@gmail.com>
Diagnosed-By: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Bug: #16619
Discussion: https://postgr.es/m/16619-aaba10f83fdc1c3c@postgresql.org
Backpatch: 13-, where child check was enhanced.
We were decoding empty transactions via streaming APIs added in commit
45fdc9738b even when the user used the option 'skip-empty-xacts'. The APIs
makes no effort to skip empty xacts under the assumption that we will
never try to stream such transactions. However, that is not true because
we can pick to stream a transaction that has change messages for
REORDER_BUFFER_CHANGE_INTERNAL_SNAPSHOT and we don't send such messages to
downstream rather they are just to update the internal state. So, we need
to skip such xacts when plugin uses the option 'skip-empty-xacts'.
Diagnosed-By: Amit Kapila
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1+OqgFNZkf7=ETe_y5ntjgDk3T0wcdkd4Sot_u1hySGfw@mail.gmail.com
Sometimes it happens that the visibility information for a tuple
becomes corrupted, either due to bugs in the database software or
external factors. Provide a function heap_force_kill() that can
be used to truncate such dead tuples to dead line pointers, and
a function heap_force_freeze() that can be used to overwrite the
visibility information in such a way that the tuple becomes
all-visible.
These functions are unsafe, in that you can easily use them to
corrupt a database that was not previously corrupted, and you can
use them to further corrupt an already-corrupted database or to
destroy data. The documentation accordingly cautions against
casual use. However, in some cases they permit recovery of data
that would otherwise be very difficult to recover, or to allow a
system to continue to function when it would otherwise be difficult
to do so.
Because we may want to add other functions for performing other
kinds of surgery in the future, the new contrib module is called
pg_surgery rather than something specific to these functions. I
proposed back-patching this so that it could be more easily used
by people running existing releases who are facing these kinds of
problems, but that proposal did not attract enough support, so
no back-patch for now.
Ashutosh Sharma, reviewed and tested by Andrey M. Borodin,
M. Beena Emerson, Masahiko Sawada, Rajkumar Raghuwanshi,
Asim Praveen, and Mark Dilger, and somewhat revised by me.
Discussion: http://postgr.es/m/CA+TgmoZW1fsU-QUNCRUQMGUygBDPVeOTLCqRdQZch=EYZnctSA@mail.gmail.com
Until now, REINDEX was not able to work with partitioned tables and
indexes, forcing users to reindex partitions one by one. This extends
REINDEX INDEX and REINDEX TABLE so as they can accept a partitioned
index and table in input, respectively, to reindex all the partitions
assigned to them with physical storage (foreign tables, partitioned
tables and indexes are then discarded).
This shares some logic with schema and database REINDEX as each
partition gets processed in its own transaction after building a list of
relations to work on. This choice has the advantage to minimize the
number of invalid indexes to one partition with REINDEX CONCURRENTLY in
the event a cancellation or failure in-flight, as the only indexes
handled at once in a single REINDEX CONCURRENTLY loop are the ones from
the partition being working on.
Isolation tests are added to emulate some cases I bumped into while
developing this feature, particularly with the concurrent drop of a
leaf partition reindexed. However, this is rather limited as LOCK would
cause REINDEX to block in the first transaction building the list of
partitions.
Per its multi-transaction nature, this new flavor cannot run in a
transaction block, similarly to REINDEX SCHEMA, SYSTEM and DATABASE.
Author: Justin Pryzby, Michael Paquier
Reviewed-by: Anastasia Lubennikova
Discussion: https://postgr.es/m/db12e897-73ff-467e-94cb-4af03705435f.adger.lj@alibaba-inc.com
This patch started out with the goal of harmonizing various arbitrary
limits on password length, but after awhile a better idea emerged:
let's just get rid of those fixed limits.
recv_password_packet() has an arbitrary limit on the packet size,
which we don't really need, so just drop it. (Note that this doesn't
really affect anything for MD5 or SCRAM password verification, since
those will hash the user's password to something shorter anyway.
It does matter for auth methods that require a cleartext password.)
Likewise remove the arbitrary error condition in pg_saslprep().
The remaining limits are mostly in client-side code that prompts
for passwords. To improve those, refactor simple_prompt() so that
it allocates its own result buffer that can be made as big as
necessary. Actually, it proves best to make a separate routine
pg_get_line() that has essentially the semantics of fgets(), except
that it allocates a suitable result buffer and hence will never
return a truncated line. (pg_get_line has a lot of potential
applications to replace randomly-sized fgets buffers elsewhere,
but I'll leave that for another patch.)
I built pg_get_line() atop stringinfo.c, which requires moving
that code to src/common/; but that seems fine since it was a poor
fit for src/port/ anyway.
This patch is mostly mine, but it owes a good deal to Nathan Bossart
who pressed for a solution to the password length problem and
created a predecessor patch. Also thanks to Peter Eisentraut and
Stephen Frost for ideas and discussion.
Discussion: https://postgr.es/m/09512C4F-8CB9-4021-B455-EF4C4F0D55A0@amazon.com
Historically, we've considered the state with relpages and reltuples
both zero as indicating that we do not know the table's tuple density.
This is problematic because it's impossible to distinguish "never yet
vacuumed" from "vacuumed and seen to be empty". In particular, a user
cannot use VACUUM or ANALYZE to override the planner's normal heuristic
that an empty table should not be believed to be empty because it is
probably about to get populated. That heuristic is a good safety
measure, so I don't care to abandon it, but there should be a way to
override it if the table is indeed intended to stay empty.
Hence, represent the initial state of ignorance by setting reltuples
to -1 (relpages is still set to zero), and apply the minimum-ten-pages
heuristic only when reltuples is still -1. If the table is empty,
VACUUM or ANALYZE (but not CREATE INDEX) will override that to
reltuples = relpages = 0, and then we'll plan on that basis.
This requires a bunch of fiddly little changes, but we can get rid of
some ugly kluges that were formerly needed to maintain the old definition.
One notable point is that FDWs' GetForeignRelSize methods will see
baserel->tuples = -1 when no ANALYZE has been done on the foreign table.
That seems like a net improvement, since those methods were formerly
also in the dark about what baserel->tuples = 0 really meant. Still,
it is an API change.
I bumped catversion because code predating this change would get confused
by seeing reltuples = -1.
Discussion: https://postgr.es/m/F02298E0-6EF4-49A1-BCB6-C484794D9ACC@thebuild.com
When calling cracklib to check the password, the diagnostic from
cracklib was thrown away. This would hide essential information such
as no dictionary being installed. Change this to show the cracklib
error message using errdetail_log().
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/f7266133-618a-0adc-52ef-f43c78806b0e%402ndquadrant.com
REPLICA IDENTITY USING INDEX behaves the same way as NOTHING if the
associated index is dropped, even if there is a primary key that could
be used as a fallback for the changes generated. There have never been
any tests to cover such scenarios, so this commit closes the gap.
Author: Michael Paquier
Reviewed-by: Masahiko Sawada, Rahila Syed, Euler Taveira
Discussion: https://postgr.es/m/20200522035028.GO2355@paquier.xyz
xact.h included utils/datetime.h, which cannot be used in the frontend
(it includes fmgr.h, which needs Datum). But xact.h only needs the
definition of TimestampTz from it, which is available directly in
datatypes/timestamp.h. Change xact.h to include that instead of
utils/datetime.h, so that it can be used in client programs.
Since commit 865f14a2d made "=>" unusable as an operator name,
it's been impossible either to install hstore 1.0 or to execute
this update script. There's not much point in continuing
to ship it.
Discussion: https://postgr.es/m/653936.1597431032@sss.pgh.pa.us
Upstream SELinux has recently marked security_context_t as officially
deprecated, causing warnings with -Wdeprecated-declarations. This is
considered as legacy code for some time now by upstream as
security_context_t got removed from most of the code tree during the
development of 2.3 back in 2014.
This removes all the references to security_context_t in sepgsql/ to be
consistent with SELinux, fixing the warnings. Note that this does not
impact the minimum version of libselinux supported.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20200813012735.GC11663@paquier.xyz
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
They are equivalent, except that StrNCpy() zero-fills the entire
destination buffer instead of providing just one trailing zero. For
all but a tiny number of callers, that's just overhead rather than
being desirable.
Remove StrNCpy() as it is now unused.
In some cases, namestrcpy() is the more appropriate function to use.
While we're here, simplify the API of namestrcpy(): Remove the return
value, don't check for NULL input. Nothing was using that anyway.
Also, remove a few unused name-related functions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/44f5e198-36f6-6cdb-7fa9-60e34784daae%402ndquadrant.com
Any libpq client can use the header. Clients include backend components
postgres_fdw, dblink, and logical replication apply worker. Back-patch
to v10, because another fix needs this. In released branches, just copy
the header and keep the original.
Hostile objects located within the installation-time search_path could
capture references in an extension's installation or upgrade script.
If the extension is being installed with superuser privileges, this
opens the door to privilege escalation. While such hazards have existed
all along, their urgency increases with the v13 "trusted extensions"
feature, because that lets a non-superuser control the installation path
for a superuser-privileged script. Therefore, make a number of changes
to make such situations more secure:
* Tweak the construction of the installation-time search_path to ensure
that references to objects in pg_catalog can't be subverted; and
explicitly add pg_temp to the end of the path to prevent attacks using
temporary objects.
* Disable check_function_bodies within installation/upgrade scripts,
so that any security gaps in SQL-language or PL-language function bodies
cannot create a risk of unwanted installation-time code execution.
* Adjust lookup of type input/receive functions and join estimator
functions to complain if there are multiple candidate functions. This
prevents capture of references to functions whose signature is not the
first one checked; and it's arguably more user-friendly anyway.
* Modify various contrib upgrade scripts to ensure that catalog
modification queries are executed with secure search paths. (These
are in-place modifications with no extension version changes, since
it is the update process itself that is at issue, not the end result.)
Extensions that depend on other extensions cannot be made fully secure
by these methods alone; therefore, revert the "trusted" marking that
commit eb67623c9 applied to earthdistance and hstore_plperl, pending
some better solution to that set of issues.
Also add documentation around these issues, to help extension authors
write secure installation scripts.
Patch by me, following an observation by Andres Freund; thanks
to Noah Misch for review.
Security: CVE-2020-14350
Since commit efc77cf5f, an indexed query using <@ has required a
full-index scan, so that it actually performs worse than a plain seqscan
would do. As I noted at the time, we'd be better off to not treat <@ as
being indexable by such indexes at all; and that's what this patch does.
It would have been difficult to remove these opclass members without
dropping the whole opclass before commit 9f9682783 fixed GiST opclass
member dependency rules, but now it's quite simple, so let's do it.
I left the existing support code in place for the time being, with
comments noting it's now unreachable. At some point, perhaps we should
remove that code in favor of throwing an error telling people to upgrade
the extension version.
Discussion: https://postgr.es/m/2176979.1596389859@sss.pgh.pa.us
Discussion: https://postgr.es/m/458.1565114141@sss.pgh.pa.us
Teach contrib/amcheck's bt_index_check() function to check agreement
between siblings links. The left sibling's right link should point to a
right sibling page whose left link points back to the same original left
sibling. This extends a check that bt_index_parent_check() always
performed to bt_index_check().
This is the first time amcheck has been taught to perform buffer lock
coupling, which we have explicitly avoided up until now. The sibling
link check tends to catch a lot of real world index corruption with
little overhead, so it seems worth accepting the complexity. Note that
the new lock coupling logic would not work correctly on replica servers
without the changes made by commits 0a7d771f and 9a9db08a (there could
be false positives without those changes).
Author: Andrey Borodin, Peter Geoghegan
Discussion: https://postgr.es/m/0EB0CFA8-CBD8-4296-8049-A2C0F28FAE8C@yandex-team.ru
Commit 7259736a6e added the capability to stream changes in ReorderBuffer
which has some tests to test the streaming mode. It is quite possible that
while this test is running a parallel transaction could be logged by
autovacuum. Such a transaction won't perform any insert/update/delete to
non-catalog tables so will be shown as an empty transaction. Fix it by
skipping the empty transactions during this test.
Per report by buildfarm.
Instead of serializing the transaction to disk after reaching the
logical_decoding_work_mem limit in memory, we consume the changes we have
in memory and invoke stream API methods added by commit 45fdc9738b.
However, sometimes if we have incomplete toast or speculative insert we
spill to the disk because we can't generate the complete tuple and stream.
And, as soon as we get the complete tuple we stream the transaction
including the serialized changes.
We can do this incremental processing thanks to having assignments
(associating subxact with toplevel xacts) in WAL right away, and
thanks to logging the invalidation messages at each command end. These
features are added by commits 0bead9af48 and c55040ccd0 respectively.
Now that we can stream in-progress transactions, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We handle such failures by returning ERRCODE_TRANSACTION_ROLLBACK
sqlerrcode from system table scan APIs to the backend or WALSender
decoding a specific uncommitted transaction. The decoding logic on the
receipt of such a sqlerrcode aborts the decoding of the current
transaction and continue with the decoding of other transactions.
We have ReorderBufferTXN pointer in each ReorderBufferChange by which we
know which xact it belongs to. The output plugin can use this to decide
which changes to discard in case of stream_abort_cb (e.g. when a subxact
gets discarded).
We also provide a new option via SQL APIs to fetch the changes being
streamed.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila, Nikhil Sontakke
Reviewed-by: Amit Kapila, Kuntal Ghosh, Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
This will be helpful if it ever proves necessary to revoke an opclass's
support for deduplication.
Backpatch: 13-, where nbtree deduplication was introduced.
Currently, page unlink leaves remaining items "as is", but replay of
corresponding WAL-record re-initializes page leaving it with no items.
For the sake of consistency, this commit makes primary delete all the items
during page unlink as well.
Thanks to this change, we now don't mask contents of deleted btree page for
WAL consistency checking.
Discussion: https://postgr.es/m/CAPpHfdt_OTyQpXaPJcWzV2N-LNeNJseNB-K_A66qG%3DL518VTFw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
This allows AM-specific knowledge to be applied during creation of
pg_amop and pg_amproc entries. Specifically, the AM knows better than
core code which entries to consider as required or optional. Giving
the latter entries the appropriate sort of dependency allows them to
be dropped without taking out the whole opclass or opfamily; which
is something we'd like to have to correct obsolescent entries in
extensions.
This callback also opens the door to performing AM-specific validity
checks during opclass creation, rather than hoping than an opclass
developer will remember to test with "amvalidate". For the most part
I've not actually added any such checks yet; that can happen in a
follow-on patch. (Note that we shouldn't remove any tests from
"amvalidate", as those are still needed to cross-check manually
constructed entries in the initdb data. So adding tests to
"amadjustmembers" will be somewhat duplicative, but it seems like
a good idea anyway.)
Patch by me, reviewed by Alexander Korotkov, Hamid Akhtar, and
Anastasia Lubennikova.
Discussion: https://postgr.es/m/4578.1565195302@sss.pgh.pa.us
Commit eba77534 fixed an amcheck false positive bug involving
inconsistencies in TOAST input state between table and index. A test
case was added that verified that such an inconsistency didn't result in
a spurious corruption related error.
Test coverage from the test was accidentally lost by commit 501e41dd,
which propagated ALTER TABLE ... SET STORAGE attstorage state to
indexes. This broke the test because the test specifically relied on
attstorage not being propagated. This artificially forced there to be
index tuples whose datums were equivalent to the datums in the heap
without the datums actually being bitwise equal.
Fix this by updating pg_attribute directly instead. Commit 501e41dd
made similar changes to a test_decoding TOAST-related test case which
made the same assumption, but overlooked the amcheck test case.
Backpatch: 11-, just like commit eba77534 (and commit 501e41dd).
Avoid repeatedly calling lseek(SEEK_END) during recovery by caching
the size of each fork. For now, we can't use the same technique in
other processes, because we lack a shared invalidation mechanism.
Do this by generalizing the pre-existing caching used by FSM and VM
to support all forks.
Discussion: https://postgr.es/m/CAEepm%3D3SSw-Ty1DFcK%3D1rU-K6GSzYzfdD4d%2BZwapdN7dTa6%3DnQ%40mail.gmail.com
This commit makes pg_stat_statements track the total number
of rows retrieved or affected by CREATE TABLE AS, SELECT INTO,
CREATE MATERIALIZED VIEW and FETCH commands.
Suggested-by: Pascal Legrand
Author: Fujii Masao
Reviewed-by: Asif Rehman
Discussion: https://postgr.es/m/1584293755198-0.post@n3.nabble.com
This adds seven methods to the output plugin API, adding support for
streaming changes of large in-progress transactions.
* stream_start
* stream_stop
* stream_abort
* stream_commit
* stream_change
* stream_message
* stream_truncate
Most of this is a simple extension of the existing methods, with
the semantic difference that the transaction (or subtransaction)
is incomplete and may be aborted later (which is something the
regular API does not really need to deal with).
This also extends the 'test_decoding' plugin, implementing these
new stream methods.
The stream_start/start_stop are used to demarcate a chunk of changes
streamed for a particular toplevel transaction.
This commit simply adds these new APIs and the upcoming patch to "allow
the streaming mode in ReorderBuffer" will use these APIs.
Author: Tomas Vondra, Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
A compressed stream may end with an empty packet. In this case
decompression finishes before reading the empty packet and the
remaining stream packet causes a failure in reading the following
data. This commit makes sure to consume such extra data, avoiding a
failure when decompression the data. This corner case was reproducible
easily with a data length of 16kB, and existed since e94dd6a. A cheap
regression test is added to cover this case based on a random,
incompressible string.
The first attempt of this patch has allowed to find an older failure
within the compression logic of pgcrypto, fixed by b9b6105. This
involved SLES 15 with z390 where a custom flavor of libz gets used.
Bonus thanks to Mark Wong for providing access to the specific
environment.
Reported-by: Frank Gagnepain
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/16476-692ef7b84e5fb893@postgresql.org
Backpatch-through: 9.5
contrib/pgcrypto mishandled the case where deflate() does not consume
all of the offered input on the first try. It reset the next_in pointer
to the start of the input instead of leaving it alone, causing the wrong
data to be fed to the next deflate() call.
This has been broken since pgcrypto was committed. The reason for the
lack of complaints seems to be that it's fairly hard to get stock zlib
to not consume all the input, so long as the output buffer is big enough
(which it normally would be in pgcrypto's usage; AFAICT the input is
always going to be packetized into packets no larger than ZIP_OUT_BUF).
However, IBM's zlibNX implementation for AIX evidently will do it
in some cases.
I did not add a test case for this, because I couldn't find one that
would fail with stock zlib. When we put back the test case for
bug #16476, that will cover the zlibNX situation well enough.
While here, write deflate()'s second argument as Z_NO_FLUSH per its
API spec, instead of hard-wiring the value zero.
Per buildfarm results and subsequent investigation.
Discussion: https://postgr.es/m/16476-692ef7b84e5fb893@postgresql.org
This reverts commit 9e10898, after finding out that buildfarm members
running SLES 15 on z390 complain on the compression and decompression
logic of the new test: pipistrelles, barbthroat and steamerduck.
Those hosts are visibly using hardware-specific changes to improve zlib
performance, requiring more investigation.
Thanks to Tom Lane for the discussion.
Discussion: https://postgr.es/m/20200722093749.GA2564@paquier.xyz
Backpatch-through: 9.5
Add infinities that behave the same as they do in the floating-point
data types. Aside from any intrinsic usefulness these may have,
this closes an important gap in our ability to convert floating
values to numeric and/or replace float-based APIs with numeric.
The new values are represented by bit patterns that were formerly
not used (although old code probably would take them for NaNs).
So there shouldn't be any pg_upgrade hazard.
Patch by me, reviewed by Dean Rasheed and Andrew Gierth
Discussion: https://postgr.es/m/606717.1591924582@sss.pgh.pa.us
A compressed stream may end with an empty packet, and PGP decompression
finished before reading this empty packet in the remaining stream. This
caused a failure in pgcrypto, handling this case as corrupted data.
This commit makes sure to consume such extra data, avoiding a failure
when decompression the entire stream. This corner case was reproducible
with a data length of 16kB, and existed since its introduction in
e94dd6a. A cheap regression test is added to cover this case.
Thanks to Jeff Janes for the extra investigation.
Reported-by: Frank Gagnepain
Author: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/16476-692ef7b84e5fb893@postgresql.org
Backpatch-through: 9.5
One change for getObjectIdentity() has been missed in 2a10fdc, causing
the module to not compile properly. This was actually the only problem,
and it happens that it is easy enough to check the compilation of the
module on Debian after installing libselinux1-dev.
Per buildfarm member rhinoceros.
When using the following functions, users could see various types of
errors of the type "cache lookup failed for OID XXX" with elog(), that
can only be used for internal errors:
* pg_describe_object()
* pg_identify_object()
* pg_identify_object_as_address()
The set of APIs managing object addresses for all object types are made
smarter by gaining a new argument "missing_ok" that allows any caller to
control if an error is raised or not on an undefined object. The SQL
functions listed above are changed to handle the case where an object is
missing.
Regression tests are added for all object types for the cases where
these are undefined. Before this commit, these cases failed with cache
lookup errors, and now they basically return NULL (minus the name of the
object type requested).
Author: Michael Paquier
Reviewed-by: Aleksander Alekseev, Dmitry Dolgov, Daniel Gustafsson,
Álvaro Herrera, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAB7nPqSZxrSmdHK-rny7z8mi=EAFXJ5J-0RbzDw6aus=wB5azQ@mail.gmail.com
read_binary_file(), used by SQL functions pg_read_file() and friends,
uses stat to determine file length to read, when not passed an explicit
length as an argument. This is problematic, for example, if the file
being read is a virtual file with a stat-reported length of zero.
Arrange to read until EOF, or StringInfo data string lenth limit, is
reached instead.
Original complaint and patch by me, with significant review, corrections,
advice, and code optimizations by Tom Lane. Backpatched to v11. Prior to
that only paths relative to the data and log dirs were allowed for files,
so no "zero length" files were reachable anyway.
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/flat/969b8d82-5bb2-5fa8-4eb1-f0e685c5d736%40joeconway.com
Backpatch-through: 11
Since v13 pg_stat_statements is allowed to track the planning time of
statements when track_planning option is enabled. Its default was on.
But this feature could cause more terrible spinlock contentions in
pg_stat_statements. As a result of this, Robins Tharakan reported that
v13 beta1 showed ~45% performance drop at high DB connection counts
(when compared with v12.3) during fully-cached SELECT-only test using
pgbench.
To avoid this performance regression by the default setting,
this commit changes default of pg_stat_statements.track_planning to off.
Back-patch to v13 where pg_stat_statements.track_planning was introduced.
Reported-by: Robins Tharakan
Author: Fujii Masao
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/2895b53b033c47ccb22972b589050dd9@EX13D05UWC001.ant.amazon.com
TOAST tables have a visibility map and a free space map, so they can
be supported by pgstattuple_approx just fine.
Add test cases to show how various pgstattuple functions accept TOAST
tables. Also add similar tests to pg_visibility, which already
accepted TOAST tables correctly but had no test coverage for them.
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/27c4496a-02b9-dc87-8f6f-bddbef54e0fe@2ndquadrant.com
Since %c only passes a C "char" to printf, it's incapable of dealing
with multibyte characters. Passing just the first byte of such a
character leads to an output string that is visibly not correctly
encoded, resulting in undesirable behavior such as encoding conversion
failures while sending error messages to clients.
We've lived with this issue for a long time because it was inconvenient
to avoid in a portable fashion. However, now that we always use our own
snprintf code, it's reasonable to use the %.*s format to print just one
possibly-multibyte character in a string. (We previously avoided that
obvious-looking answer in order to work around glibc's bug #6530, cf
commits 54cd4f045 and ed437e2b2.)
Hence, run around and fix a bunch of places that used %c to report
a character found in a user-supplied string. For simplicity, I did
not touch places that were emitting non-user-facing debug messages,
or reporting catalog data that should always be ASCII. (It's also
unclear how useful this approach could be in frontend code, where
it's less certain that we know what encoding we're dealing with.)
In passing, improve a couple of poorly-written error messages in
pageinspect/heapfuncs.c.
This is a longstanding issue, but I'm hesitant to back-patch because
of the impact on translatable message strings. In any case this fix
would not work reliably before v12.
Tom Lane and Quan Zongliang
Discussion: https://postgr.es/m/a120087c-4c88-d9d4-1ec5-808d7a7f133d@gmail.com
SQL:1999 had syntax
SUBSTRING(text FROM pattern FOR escapechar)
but this was replaced in SQL:2003 by the more clear
SUBSTRING(text SIMILAR pattern ESCAPE escapechar)
but this was never implemented in PostgreSQL. This patch adds that
new syntax as an alternative in the parser, and updates documentation
and tests to indicate that this is the preferred alternative now.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/flat/a15db31c-d0f8-8ce0-9039-578a31758adb%402ndquadrant.com
This patch removes the hardcoded check for superuser privileges when
executing replication origin functions. Instead, execution is revoked
from public, meaning that those functions can be executed by a superuser
and that access to them can be granted.
Author: Martín Marqués
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Masahiko Sawada
Discussion: https:/postgr.es/m/CAPdiE1xJMZOKQL3dgHMUrPqysZkgwzSMXETfKkHYnBAB7-0VRQ@mail.gmail.com
Commit 5e0928005 changed the planner so that, instead of blindly using
DEFAULT_COLLATION_OID when invoking operators for selectivity estimation,
it would use the collation of the column whose statistics we're
considering. This was recognized as still being not quite the right
thing, but it seemed like a good incremental improvement. However,
shortly thereafter we introduced nondeterministic collations, and that
creates cases where operators can fail if they're passed the wrong
collation. We don't want planning to fail in cases where the query itself
would work, so this means that we *must* use the query's collation when
invoking operators for estimation purposes.
The only real problem this creates is in ineq_histogram_selectivity, where
the binary search might produce a garbage answer if we perform comparisons
using a different collation than the column's histogram is ordered with.
However, when the query's collation is significantly different from the
column's default collation, the estimate we previously generated would be
pretty irrelevant anyway; so it's not clear that this will result in
noticeably worse estimates in practice. (A follow-on patch will improve
this situation in HEAD, but it seems too invasive for back-patch.)
The patch requires changing the signatures of mcv_selectivity and allied
functions, which are exported and very possibly are used by extensions.
In HEAD, I just did that, but an API/ABI break of this sort isn't
acceptable in stable branches. Therefore, in v12 the patch introduces
"mcv_selectivity_ext" and so on, with signatures matching HEAD, and makes
the old functions into wrappers that assume DEFAULT_COLLATION_OID should
be used. That does not match the prior behavior, but it should avoid risk
of failure in most cases. (In practice, I think most extension datatypes
aren't collation-aware, so the change probably doesn't matter to them.)
Per report from James Lucas. Back-patch to v12 where the problem was
introduced.
Discussion: https://postgr.es/m/CAAFmbbOvfi=wMM=3qRsPunBSLb8BFREno2oOzSBS=mzfLPKABw@mail.gmail.com
Commit 1f39bce021 added disk-based hash aggregation, which may spill
incoming tuples to disk. It however did not request projection to make
the tuples as narrow as possible, which may mean having to spill much
more data than necessary (increasing I/O, pushing other stuff from page
cache, etc.).
This adds CP_SMALL_TLIST in places that may use hash aggregation - we do
that only for AGG_HASHED. It's unnecessary for AGG_SORTED, because that
either uses explicit Sort (which already does projection) or pre-sorted
input (which does not need spilling to disk).
Author: Tomas Vondra
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/20200519151202.u2p2gpiawoaznsv2%40development
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
amcheck expects at least hikey to always exist on leaf page even if it is
deleted page. But replica reinitializes page during replay of page deletion,
causing deleted page to have no items. Thus, replay of page deletion can
cause an error in concurrent amcheck run.
This commit relaxes amcheck expectation making it tolerate deleted page with
no items.
Reported-by: Konstantin Knizhnik
Discussion: https://postgr.es/m/CAPpHfdt_OTyQpXaPJcWzV2N-LNeNJseNB-K_A66qG%3DL518VTFw%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
Backpatch-through: 11
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
In commit 33e05f89c5, we have added the option to display WAL usage
statistics in Explain and auto_explain. The display format used two spaces
between each field which is inconsistent with Buffer usage statistics which
is using one space between each field. Change the format to make WAL usage
statistics consistent with Buffer usage statistics.
This commit also changed the usage of "full page writes" to
"full page images" for WAL usage statistics to make it consistent with
other parts of code and docs.
Author: Julien Rouhaud, Amit Kapila
Reviewed-by: Justin Pryzby, Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
Add a test case to contrib/amcheck that creates coverage of code paths
that are used to verify posting list tuples (tuples created when
deduplication merges together existing tuples to avoid a leaf page
split).
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
The libpq parameters ssl{max|min}protocolversion are renamed to use
underscores, to become ssl_{max|min}_protocol_version. The related
environment variables still use the names introduced in commit ff8ca5f
that added the feature.
Per complaint from Peter Eisentraut (this was also mentioned by me in
the original patch review but the issue got discarded).
Author: Daniel Gustafsson
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/b319e449-318d-e691-4997-1327e166fcc4@2ndquadrant.com
Lack of these checks could cause visible misbehavior, including
assertion failures. This was missed in commit c655077639, whereby
restart_lsn becomes invalid when the size limit is exceeded.
Also reword some existing error messages, and add errdetail(), so that
the reported errors all match in spirit.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200408.093710.447591748588426656.horikyota.ntt@gmail.com
fixup_whole_row_references() did the wrong thing with a dropped column,
resulting in a commit-time warning about a cache reference leak.
I (tgl) added a test case exercising this, but back-patched the test
only as far as v10; the patch didn't apply cleanly to 9.6 and it
didn't seem worth the trouble to adapt it. The bug is pretty old
though, so apply the code change all the way back.
Michael Luo, with cosmetic improvements by me
Discussion: https://postgr.es/m/BYAPR08MB5606D1453D7F50E2AF4D2FD29AD80@BYAPR08MB5606.namprd08.prod.outlook.com
An nbtree split point can be thought of as a point between two adjoining
tuples from an imaginary version of the page being split that includes
the incoming/new item (in addition to the items that really are on the
page). These adjoining tuples are called the lastleft and firstright
tuples.
The variables that represent split points contained a field called
firstright, which is an offset number of the first data item from the
original page that goes on the new right page. The corresponding tuple
from origpage was usually the same thing as the actual firstright tuple,
but not always: the firstright tuple is sometimes the new/incoming item
instead. This situation seems unnecessarily confusing.
Make things clearer by renaming the origpage offset returned by
_bt_findsplitloc() to "firstrightoff". We now have a firstright tuple
and a firstrightoff offset number which are comparable to the
newitem/lastleft tuples and the newitemoff/lastleftoff offset numbers
respectively. Also make sure that we are consistent about how we
describe nbtree page split point state.
Push the responsibility for dealing with pg_upgrade'd !heapkeyspace
indexes down to lower level code, relieving _bt_split() from dealing
with it directly. This means that we always have a palloc'd left page
high key on the leaf level, no matter what. This enables simplifying
some of the code (and code comments) within _bt_split().
Finally, restructure the page split code to make it clearer why suffix
truncation (which only takes place during leaf page splits) is
completely different to the first data item truncation that takes place
during internal page splits. Tuples are marked as having fewer
attributes stored in both cases, and the firstright tuple is truncated
in both cases, so it's easy to imagine somebody missing the distinction.
We've had a mixture of the warnings pragma, the -w switch on the shebang
line, and no warnings at all. This patch removes the -w swicth and add
the warnings pragma to all perl sources missing it. It raises the
severity of the TestingAndDebugging::RequireUseWarnings perlcritic
policy to level 5, so that we catch any future violations.
Discussion: https://postgr.es/m/20200412074245.GB623763@rfd.leadboat.com
Add a DEBUG1 message indicating that verification of the index structure
is underway. Also reduce the severity level of the existing "tree
level" debug message to DEBUG1. It should never have been made DEBUG2.
Any B-Tree index with more than a couple of levels will generally also
have so many pages that the per-page DEBUG2 messages will become
completely unmanageable.
In passing, add a new "Tip" to the docs that advises users that run into
corruption that the debug messages might provide useful additional
context.
Commit d2d8a229bc introduced Incremental Sort, but it was considered
only in create_ordered_paths() as an alternative to regular Sort. There
are many other places that require sorted input and might benefit from
considering Incremental Sort too.
This patch modifies a number of those places, but not all. The concern
is that just adding Incremental Sort to any place that already adds
Sort may increase the number of paths considered, negatively affecting
planning time, without any benefit. So we've taken a more conservative
approach, based on analysis of which places do affect a set of queries
that did seem practical. This means some less common queries may not
benefit from Incremental Sort yet.
Author: Tomas Vondra
Reviewed-by: James Coleman
Discussion: https://postgr.es/m/CAPpHfds1waRZ=NOmueYq0sx1ZSCnt+5QJvizT8ndT2=etZEeAQ@mail.gmail.com
The txid_XXX family of fmgr functions exposes 64 bit transaction IDs to
users as int8. Now that we have an SQL type xid8 for FullTransactionId,
define a new set of functions including pg_current_xact_id() and
pg_current_snapshot() based on that. Keep the old functions around too,
for now.
It's a bit sneaky to use the same C functions for both, but since the
binary representation is identical except for the signedness of the
type, and since older functions are the ones using the wrong signedness,
and since we'll presumably drop the older ones after a reasonable period
of time, it seems reasonable to switch to FullTransactionId internally
and share the code for both.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
This commit adds a new option WAL similar to existing option BUFFERS in the
EXPLAIN command. This option allows to include information on WAL record
generation added by commit df3b181499 in EXPLAIN output.
This also allows the WAL usage information to be displayed via
the auto_explain module. A new parameter auto_explain.log_wal controls
whether WAL usage statistics are printed when an execution plan is logged.
This parameter has no effect unless auto_explain.log_analyze is enabled.
Author: Julien Rouhaud
Reviewed-by: Dilip Kumar and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
This commit adds three new columns in pg_stat_statements output to
display WAL usage statistics added by commit df3b181499.
This commit doesn't bump the version of pg_stat_statements as the
same is done for this release in commit 17e0328224.
Author: Kirill Bychik and Julien Rouhaud
Reviewed-by: Julien Rouhaud, Fujii Masao, Dilip Kumar and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
contrib/lo's lo_manage() thought it could use
trigdata->tg_trigger->tgname in its error message about
not being called as a trigger. That naturally led to a core dump.
unique_key_recheck() figured it could Assert that fcinfo->context
is a TriggerData node in advance of having checked that it's
being called as a trigger. That's harmless in production builds,
and perhaps not that easy to reach in any case, but it's logically
wrong.
The first of these per bug #16340 from William Crowell;
the second from manual inspection of other CALLED_AS_TRIGGER
call sites.
Back-patch the lo.c change to all supported branches, the
other to v10 where the thinko crept in.
Discussion: https://postgr.es/m/16340-591c7449dc7c8c47@postgresql.org
This commit makes pg_stat_statements support new GUC
pg_stat_statements.track_planning. If this option is enabled,
pg_stat_statements tracks the planning statistics of the statements,
e.g., the number of times the statement was planned, the total time
spent planning the statement, etc. This feature is useful to check
the statements that it takes a long time to plan. Previously since
pg_stat_statements tracked only the execution statistics, we could
not use that for the purpose.
The planning and execution statistics are stored at the end of
each phase separately. So there are not always one-to-one relationship
between them. For example, if the statement is successfully planned
but fails in the execution phase, only its planning statistics are stored.
This may cause the users to be able to see different pg_stat_statements
results from the previous version. To avoid this,
pg_stat_statements.track_planning needs to be disabled.
This commit bumps the version of pg_stat_statements to 1.8
since it changes the definition of pg_stat_statements function.
Author: Julien Rouhaud, Pascal Legrand, Thomas Munro, Fujii Masao
Reviewed-by: Sergei Kornilov, Tomas Vondra, Yoshikazu Imai, Haribabu Kommi, Tom Lane
Discussion: https://postgr.es/m/CAHGQGwFx_=DO-Gu-MfPW3VQ4qC7TfVdH2zHmvZfrGv6fQ3D-Tw@mail.gmail.com
Discussion: https://postgr.es/m/CAEepm=0e59Y_6Q_YXYCTHZkqOc6H2pJ54C_Xe=VFu50Aqqp_sA@mail.gmail.com
Discussion: https://postgr.es/m/DB6PR0301MB21352F6210E3B11934B0DCC790B00@DB6PR0301MB2135.eurprd03.prod.outlook.com
Fix lquery parsing to handle repeated flag characters correctly,
and to enforce the max label length correctly in some cases where
it did not before, and to detect empty labels in some cases where
it did not before.
In a more cosmetic vein, use a switch rather than if-then chains to
handle the different states, and avoid unnecessary checks on charlen
when looking for ASCII characters, and factor out multiple copies of
the label length checking code.
Tom Lane and Dmitry Belyavsky
Discussion: https://postgr.es/m/CADqLbzLVkBuPX0812o+z=c3i6honszsZZ6VQOSKR3VPbB56P3w@mail.gmail.com
Not much to say here --- does what it says on the tin. The "binary"
representation in each case is really just the same as the text format,
though we prefix a version-number byte in case anyone ever feels
motivated to change that. Thus, there's not any expectation of improved
speed or reduced space; the point here is just to allow clients to use
binary format for all columns of a query result or COPY data.
This makes use of the recently added ALTER TYPE support to add binary
I/O functions to an existing data type. As in commit a80818605,
we can piggy-back on there already being a new-for-v13 version of the
ltree extension, so we don't need a new update script file.
Nino Floris, reviewed by Alexander Korotkov and myself
Discussion: https://postgr.es/m/CANmj9Vxx50jOo1L7iSRxd142NyTz6Bdcgg7u9P3Z8o0=HGkYyQ@mail.gmail.com
Quite a few matching operators such as JSONB's @> used "contsel" and
"contjoinsel" as their selectivity estimators. That was a bad idea,
because (a) contsel is only a stub, yielding a fixed default estimate,
and (b) that default is 0.001, meaning we estimate these operators as
five times more selective than equality, which is surely pretty silly.
There's a good model for improving this in ltree's ltreeparentsel():
for any "var OP constant" query, we can try applying the operator
to all of the column's MCV and histogram values, taking the latter
as being a random sample of the non-MCV values. That code is
actually 100% generic, except for the question of exactly what
default selectivity ought to be plugged in when we don't have stats.
Hence, migrate the guts of ltreeparentsel() into the core code, provide
wrappers "matchingsel" and "matchingjoinsel" with a more-appropriate
default estimate, and use those for the non-geometric operators that
formerly used contsel (mostly JSONB containment operators and tsquery
matching).
Also apply this code to some match-like operators in hstore, ltree, and
pg_trgm, including the former users of ltreeparentsel as well as ones
that improperly used contsel. Since commit 911e70207 just created new
versions of those extensions that we haven't released yet, we can sneak
this change into those new versions instead of having to create an
additional generation of update scripts.
Patch by me, reviewed by Alexey Bashtanov
Discussion: https://postgr.es/m/12237.1582833074@sss.pgh.pa.us
The existing implementation of the ltree ~ lquery match operator is
sufficiently complex and undocumented that it's hard to tell exactly
what it does. But one thing it clearly gets wrong is the combination
of NOT symbols (!) and '*' symbols. A pattern such as '*.!foo.*'
should, by any ordinary understanding of regular expression behavior,
match any ltree that has at least one label that's not "foo". As best
we can tell by experimentation, what it's actually matching is any
ltree in which *no* label is "foo". That's surprising, and not at all
what the documentation says.
Now, that's arguably a useful behavior, so if we rewrite to fix the
bug we should provide some other way to get it. To do so, add the
ability to attach lquery quantifiers to non-'*' items as well as '*'s.
Then the pattern '!foo{,}' expresses "any ltree in which no label is
foo". For backwards compatibility, the default quantifier for non-'*'
items has to be "{1}", although the default for '*' items is '{,}'.
I wouldn't have done it like that in a green field, but it's not
totally horrible.
Armed with that, rewrite checkCond() from scratch. Treating '*' and
non-'*' items alike makes it simpler, not more complicated, so that
the function actually gets a lot shorter than it was.
Filip Rembiałkowski, Tom Lane, Nikita Glukhov, per a very
ancient bug report from M. Palm
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
Ensure that the type name is mentioned in all cases (bare "syntax error"
isn't that helpful). Avoid using the term "level", since that's not
used in the documentation. Phrase error position reports as "at
character N" not "in position N"; the latter seems ambiguous, and it's
certainly not how we say it elsewhere. For the same reason, make the
character position values be 1-based not 0-based. Provide a position
in more cases. (I continued to leave that out of messages complaining
about end-of-input, where it seemed pointless, as well as messages
complaining about overall input complexity, where fingering any one part
of the input would be arbitrary.)
Discussion: https://postgr.es/m/15582.1585529626@sss.pgh.pa.us
PostgreSQL provides set of template index access methods, where opclasses have
much freedom in the semantics of indexing. These index AMs are GiST, GIN,
SP-GiST and BRIN. There opclasses define representation of keys, operations on
them and supported search strategies. So, it's natural that opclasses may be
faced some tradeoffs, which require user-side decision. This commit implements
opclass parameters allowing users to set some values, which tell opclass how to
index the particular dataset.
This commit doesn't introduce new storage in system catalog. Instead it uses
pg_attribute.attoptions, which is used for table column storage options but
unused for index attributes.
In order to evade changing signature of each opclass support function, we
implement unified way to pass options to opclass support functions. Options
are set to fn_expr as the constant bytea expression. It's possible due to the
fact that opclass support functions are executed outside of expressions, so
fn_expr is unused for them.
This commit comes with some examples of opclass options usage. We parametrize
signature length in GiST. That applies to multiple opclasses: tsvector_ops,
gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and
gist_hstore_ops. Also we parametrize maximum number of integer ranges for
gist__int_ops. However, the main future usage of this feature is expected
to be json, where users would be able to specify which way to index particular
json parts.
Catversion is bumped.
Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera
Previously pg_stat_statements calculated the difference of buffer counters
by its own code even while BufferUsageAccumDiff() had the same code.
This commit expose BufferUsageAccumDiff() and makes pg_stat_statements
use it for the calculation, in order to simply the code.
This change also would be useful for the upcoming patch for the planning
counters in pg_stat_statements because the patch will add one more code
for the calculation of difference of buffer counters and that can easily be
done by using BufferUsageAccumDiff().
Author: Julien Rouhaud
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/bdfee4e0-a304-2498-8da5-3cb52c0a193e@oss.nttdata.com
Add more comments in ltree.h, and correct a misstatement or two.
Use a symbol, rather than hardwired constants, for the maximum length
of an ltree label. The max length is still hardwired in the associated
error messages, but I want to clean that up as part of a separate patch
to improve the error messages.
Something like "*{2}.*{3}" should presumably mean the same as
"*{5}", but it didn't. Improve that.
Get rid of an undocumented and remarkably ugly (though not, as far as
I can tell, actually unsafe) static variable in favor of passing more
arguments to checkCond().
Reverse-engineer some commentary. This function, like all of ltree,
is still far short of what I would consider the minimum acceptable
level of internal documentation, but at least now it has more than
zero comments.
Although this certainly seems like a bug fix, people might not
thank us for changing query behavior in stable branches, so
no back-patch.
Nikita Glukhov, with cosmetic improvements by me
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
These uint16 fields could be overflowed by excessively long input,
producing strange results. Complain for invalid input.
Likewise check for out-of-range values of the repeat counts in lquery.
(We don't try too hard on that one, notably not bothering to detect
if atoi's result has overflowed.)
Also detect length overflow in ltree_concat.
In passing, be more consistent about whether "syntax error" messages
include the type name. Also, clarify the documentation about what
the size limit is.
This has been broken for a long time, so back-patch to all supported
branches.
Nikita Glukhov, reviewed by Benjie Gillam and Tomas Vondra
Discussion: https://postgr.es/m/CAP_rww=waX2Oo6q+MbMSiZ9ktdj6eaJj0cQzNu=Ry2cCDij5fw@mail.gmail.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
We don't need to manually clean up allocations in a SRF's
multi_call_memory_ctx, because the SRF_RETURN_DONE infrastructure
takes care of that (and also ensures that it will happen even if the
function never gets a final call, which simple manual cleanup cannot
do).
Hence, the code removed by this patch is a waste of code and cycles.
Worse, it gives the impression that cleaning up manually is a thing,
which can lead to more serious errors such as those fixed in
commits 085b6b667 and b4570d33a. So we should get rid of it.
These are not quite actual bugs though, so I couldn't muster the
enthusiasm to back-patch. Fix in HEAD only.
Justin Pryzby
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
This extends the fixes made in commit 085b6b667 to other SRFs with the
same bug, namely pg_logdir_ls(), pgrowlocks(), pg_timezone_names(),
pg_ls_dir(), and pg_tablespace_databases().
Also adjust various comments and documentation to warn against
expecting to clean up resources during a ValuePerCall SRF's final
call.
Back-patch to all supported branches, since these functions were
all born broken.
Justin Pryzby, with cosmetic tweaks by me
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
This commit eliminates lossiness in check for missing parent downlinks in
B-tree. Instead of collecting lossy bitmap, we check for missing downlinks
while visiting child pages referenced by downlinks of target level. We
traverse from previous child page to the subsequent child page by right links.
Intermediate pages are candidates to have lost parent downlinks.
Also this commit introduces matching of child high key to the pivot key of
it's parent.
Discussion: https://postgr.es/m/CAPpHfduoF-c4RhOyOm%3D4-Y367%2B8txq9Q6iM_ty0OYc8si1Abww%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
Previously, this code just smashed all types of DefElem values to
strings, cavalierly reasoning that nobody would care. But in point of
fact, most of the defGetFoo functions do distinguish among different
input syntaxes; for instance defGetBoolean will accept 1 as an integer
but not "1" as a string. This led to CREATE/ALTER TEXT SEARCH
DICTIONARY accepting 0 and 1 as values for boolean dictionary
properties, only to have the dictionary fail at runtime.
We can upgrade this behavior by teaching serialize_deflist that it
does not need to quote T_Integer or T_Float nodes' values on output,
and then teaching deserialize_deflist to restore unquoted integer or
float values as the appropriate node type. This should not break
anything using pg_ts_dict.dictinitoption, since that field is just
defined as being something valid to include in CREATE TEXT SEARCH
DICTIONARY.
deserialize_deflist is also used to parse the options arguments
for the ts_headline family of functions, but so far as I can see
this won't cause any problems there either: the only consumer of
that output is prsd_headline which always uses defGetString.
(Really that's a bad idea, but I won't risk changing it here.)
This is surely a bug fix, but given the lack of field complaints
I don't think it's necessary to back-patch.
Discussion: https://postgr.es/m/CAMkU=1xRcs_BUPzR0+V3WndaCAv0E_m3h6aUEJ8NF-sY1nnHsw@mail.gmail.com
The need for this was removed by
8b9e9644dc.
A number of files now need to include utils/acl.h or
parser/parse_node.h explicitly where they previously got it indirectly
somehow.
Since parser/parse_node.h already includes nodes/parsenodes.h, the
latter is then removed where the former was added. Also, remove
nodes/pg_list.h from objectaddress.h, since that's included via
nodes/parsenodes.h.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/7601e258-26b2-8481-36d0-dc9dca6f28f1%402ndquadrant.com
The data types that contrib/pageinspect's bt_metap() function were
declared to return as OUT arguments were wrong in some cases. For
example, the oldest_xact column (a TransactionId/xid field) was declared
integer/int4 within the pageinspect extension's sql file. This led to
errors when an oldest_xact value that exceeded 2^31-1 was encountered.
Some of the other columns were defined incorrectly ever since
pageinspect was first introduced, though they were far less likely to
produce problems in practice.
Fix these issues by changing the declaration of bt_metap() to
consistently use data types that can reliably represent all possible
values. This fixes things on HEAD only. No backpatch, since it doesn't
seem like there is a safe way to fix the issue without including a new
version of the pageinspect extension (HEAD/Postgres 13 already
introduced a new version of the extension). Besides, the oldest_xact
issue has been around since the release of Postgres 11, and we haven't
heard any complaints about it before now.
Also, throw an error when we detect a bt_metap() declaration that must
be from an old version of the pageinspect extension by examining the
number of attributes from the tuple descriptor for the return tuples.
It seems better to throw an error in a reliable and obvious way
following a Postgres upgrade, rather than letting bt_metap() fail
unpredictably. The problem is fundamentally with the CREATE FUNCTION
declared data types themselves, so I see no sensible alternative.
Reported-By: Victor Yegorov
Bug: #16285
Discussion: https://postgr.es/m/16285-df8fc1000ab3d5fc@postgresql.org
plperl's default handling of bool arguments or results is not terribly
satisfactory, since Perl doesn't consider the string 'f' to be false.
Ideally we'd just fix that, but the backwards-compatibility hazard
would be substantial. Instead, build a TRANSFORM module that can
be optionally applied to provide saner semantics.
Perhaps usefully, this is also about the minimum possible skeletal
example of a plperl transform module; so it might be a better starting
point for user-written transform modules than hstore_plperl or
jsonb_plperl.
Ivan Panchenko
Discussion: https://postgr.es/m/1583013317.881182688@f390.i.mail.ru
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
The backend was using strings to represent command tags and doing string
comparisons in multiple places, but that's slow and unhelpful. Create a
new command list with a supporting structure to use instead; this is
stored in a tag-list-file that can be tailored to specific purposes with
a caller-definable C macro, similar to what we do for WAL resource
managers. The first first such uses are a new CommandTag enum and a
CommandTagBehavior struct.
Replace numerous occurrences of char *completionTag with a
QueryCompletion struct so that the code no longer stores information
about completed queries in a cstring. Only at the last moment, in
EndCommand(), does this get converted to a string.
EventTriggerCacheItem no longer holds an array of palloc’d tag strings
in sorted order, but rather just a Bitmapset over the CommandTags.
Author: Mark Dilger, with unsolicited help from Álvaro Herrera
Reviewed-by: John Naylor, Tom Lane
Discussion: https://postgr.es/m/981A9DB4-3F0C-4DA5-88AD-CB9CFF4D6CAD@enterprisedb.com
Add a new bt_metap() column to display the metapage's allequalimage
field. Also add three new columns to contrib/pageinspect's
bt_page_items() function:
* Add a boolean column ("dead") that displays the LP_DEAD bit value for
each non-pivot tuple.
* Add a TID column ("htid") that displays a single heap TID value for
each tuple. This is the TID that is returned by BTreeTupleGetHeapTID(),
so comparable values are shown for pivot tuples, plain non-pivot tuples,
and posting list tuples.
* Add a TID array column ("tids") that displays TIDs from each tuple's
posting list, if any. This works just like the "tids" column from
pageinspect's gin_leafpage_items() function.
No version bump for the pageinspect extension, since there hasn't been a
stable Postgres release since the last version bump (the last bump was
part of commit 58b4cb30).
Author: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-WzmSMmU2eNvY9+a4MNP+z02h6sa-uxZvN3un6jY02ZVBSw@mail.gmail.com
This also involves renaming src/include/utils/hashutils.h, which
becomes src/include/common/hashfn.h. Perhaps an argument can be
made for keeping the hashutils.h name, but it seemed more
consistent to make it match the name of the file, and also more
descriptive of what is actually going on here.
Patch by me, reviewed by Suraj Kharage and Mark Dilger. Off-list
advice on how not to break the Windows build from Davinder Singh
and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
Deduplication reduces the storage overhead of duplicates in indexes that
use the standard nbtree index access method. The deduplication process
is applied lazily, after the point where opportunistic deletion of
LP_DEAD-marked index tuples occurs. Deduplication is only applied at
the point where a leaf page split would otherwise be required. New
posting list tuples are formed by merging together existing duplicate
tuples. The physical representation of the items on an nbtree leaf page
is made more space efficient by deduplication, but the logical contents
of the page are not changed. Even unique indexes make use of
deduplication as a way of controlling bloat from duplicates whose TIDs
point to different versions of the same logical table row.
The lazy approach taken by nbtree has significant advantages over a GIN
style eager approach. Most individual inserts of index tuples have
exactly the same overhead as before. The extra overhead of
deduplication is amortized across insertions, just like the overhead of
page splits. The key space of indexes works in the same way as it has
since commit dd299df8 (the commit that made heap TID a tiebreaker
column).
Testing has shown that nbtree deduplication can generally make indexes
with about 10 or 15 tuples for each distinct key value about 2.5X - 4X
smaller, even with single column integer indexes (e.g., an index on a
referencing column that accompanies a foreign key). The final size of
single column nbtree indexes comes close to the final size of a similar
contrib/btree_gin index, at least in cases where GIN's posting list
compression isn't very effective. This can significantly improve
transaction throughput, and significantly reduce the cost of vacuuming
indexes.
A new index storage parameter (deduplicate_items) controls the use of
deduplication. The default setting is 'on', so all new B-Tree indexes
automatically use deduplication where possible. This decision will be
reviewed at the end of the Postgres 13 beta period.
There is a regression of approximately 2% of transaction throughput with
synthetic workloads that consist of append-only inserts into a table
with several non-unique indexes, where all indexes have few or no
repeated values. The underlying issue is that cycles are wasted on
unsuccessful attempts at deduplicating items in non-unique indexes.
There doesn't seem to be a way around it short of disabling
deduplication entirely. Note that deduplication of items in unique
indexes is fairly well targeted in general, which avoids the problem
there (we can use a special heuristic to trigger deduplication passes in
unique indexes, since we're specifically targeting "version bloat").
Bump XLOG_PAGE_MAGIC because xl_btree_vacuum changed.
No bump in BTREE_VERSION, since the representation of posting list
tuples works in a way that's backwards compatible with version 4 indexes
(i.e. indexes built on PostgreSQL 12). However, users must still
REINDEX a pg_upgrade'd index to use deduplication, regardless of the
Postgres version they've upgraded from. This is the only way to set the
new nbtree metapage flag indicating that deduplication is generally
safe.
Author: Anastasia Lubennikova, Peter Geoghegan
Reviewed-By: Peter Geoghegan, Heikki Linnakangas
Discussion:
https://postgr.es/m/55E4051B.7020209@postgrespro.ruhttps://postgr.es/m/4ab6e2db-bcee-f4cf-0916-3a06e6ccbb55@postgrespro.ru
The comments in fd.c have long claimed that all file allocations should
go through that module, but in reality that's not always practical.
fd.c doesn't supply APIs for invoking some FD-producing syscalls like
pipe() or epoll_create(); and the APIs it does supply for non-virtual
FDs are mostly insistent on releasing those FDs at transaction end;
and in some cases the actual open() call is in code that can't be made
to use fd.c, such as libpq.
This has led to a situation where, in a modern server, there are likely
to be seven or so long-lived FDs per backend process that are not known
to fd.c. Since NUM_RESERVED_FDS is only 10, that meant we had *very*
few spare FDs if max_files_per_process is >= the system ulimit and
fd.c had opened all the files it thought it safely could. The
contrib/postgres_fdw regression test, in particular, could easily be
made to fall over by running it under a restrictive ulimit.
To improve matters, invent functions Acquire/Reserve/ReleaseExternalFD
that allow outside callers to tell fd.c that they have or want to allocate
a FD that's not directly managed by fd.c. Add calls to track all the
fixed FDs in a standard backend session, so that we are honestly
guaranteeing that NUM_RESERVED_FDS FDs remain unused below the EMFILE
limit in a backend's idle state. The coding rules for these functions say
that there's no need to call them in code that just allocates one FD over
a fairly short interval; we can dip into NUM_RESERVED_FDS for such cases.
That means that there aren't all that many places where we need to worry.
But postgres_fdw and dblink must use this facility to account for
long-lived FDs consumed by libpq connections. There may be other places
where it's worth doing such accounting, too, but this seems like enough
to solve the immediate problem.
Internally to fd.c, "external" FDs are limited to max_safe_fds/3 FDs.
(Callers can choose to ignore this limit, but of course it's unwise
to do so except for fixed file allocations.) I also reduced the limit
on "allocated" files to max_safe_fds/3 FDs (it had been max_safe_fds/2).
Conceivably a smarter rule could be used here --- but in practice,
on reasonable systems, max_safe_fds should be large enough that this
isn't much of an issue, so KISS for now. To avoid possible regression
in the number of external or allocated files that can be opened,
increase FD_MINFREE and the lower limit on max_files_per_process a
little bit; we now insist that the effective "ulimit -n" be at least 64.
This seems like pretty clearly a bug fix, but in view of the lack of
field complaints, I'll refrain from risking a back-patch.
Discussion: https://postgr.es/m/E1izCmM-0005pV-Co@gemulon.postgresql.org
Andres Freund pointed out that allowing non-superusers to run
"CREATE EXTENSION ... FROM unpackaged" has security risks, since
the unpackaged-to-1.0 scripts don't try to verify that the existing
objects they're modifying are what they expect. Just attaching such
objects to an extension doesn't seem too dangerous, but some of them
do more than that.
We could have resolved this, perhaps, by still requiring superuser
privilege to use the FROM option. However, it's fair to ask just what
we're accomplishing by continuing to lug the unpackaged-to-1.0 scripts
forward. None of them have received any real testing since 9.1 days,
so they may not even work anymore (even assuming that one could still
load the previous "loose" object definitions into a v13 database).
And an installation that's trying to go from pre-9.1 to v13 or later
in one jump is going to have worse compatibility problems than whether
there's a trivial way to convert their contrib modules into extension
style.
Hence, let's just drop both those scripts and the core-code support
for "CREATE EXTENSION ... FROM".
Discussion: https://postgr.es/m/20200213233015.r6rnubcvl4egdh5r@alap3.anarazel.de
Manifested as
ERROR: subtransaction logged without previous top-level txn record
this check forbids legit behaviours like
- First xl_xact_assignment record is beyond reading, i.e. earlier
restart_lsn.
- After restart_lsn there is some change of a subxact.
- After that, there is second xl_xact_assignment (for another subxact)
revealing the relationship between top and first subxact.
Such a transaction won't be streamed anyway because we hadn't seen it in
full. Saying for sure whether xact of some record encountered after
the snapshot was deserialized can be streamed or not requires to know
whether it wrote something before deserialization point --if yes, it
hasn't been seen in full and can't be decoded. Snapshot doesn't have such
info, so there is no easy way to relax the check.
Reported-by: Hsu, John
Diagnosed-by: Arseny Sher
Author: Arseny Sher, Amit Kapila
Reviewed-by: Amit Kapila, Dilip Kumar
Backpatch-through: 9.5
Discussion: https://postgr.es/m/AB5978B2-1772-4FEE-A245-74C91704ECB0@amazon.com
Since its introduction in fe59e56, the code in charge of validating and
converting a file path includes some extra handling for absolute paths
pointing to an external log_directory, but this has never been used.
Author: Antonin Houska
Reviewed-by: Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/32663.1581592539@antos
This allows these modules to be installed into a database without
superuser privileges (assuming that the DBA or sysadmin has installed
the module's files in the expected place). You only need CREATE
privilege on the current database, which by default would be
available to the database owner.
The following modules are marked trusted:
btree_gin
btree_gist
citext
cube
dict_int
earthdistance
fuzzystrmatch
hstore
hstore_plperl
intarray
isn
jsonb_plperl
lo
ltree
pg_trgm
pgcrypto
seg
tablefunc
tcn
tsm_system_rows
tsm_system_time
unaccent
uuid-ossp
In the future we might mark some more modules trusted, but there
seems to be no debate about these, and on the whole it seems wise
to be conservative with use of this feature to start out with.
Discussion: https://postgr.es/m/32315.1580326876@sss.pgh.pa.us
Very recent gcc complains that PLyObject_ToJsonbValue could return
a pointer to a local variable. I think it's wrong; but the coding
is fragile enough, and the savings of one palloc() minimal enough,
that it seems better to just do a palloc() all the time. (My other
idea of tweaking the if-condition doesn't suppress the warning.)
Back-patch to v11 where this code was introduced.
Discussion: https://postgr.es/m/21547.1580170366@sss.pgh.pa.us
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
To make this work, (1) makeJsonLexContextCstringLen now takes the
encoding to be used as an argument; (2) check_stack_depth() is made to
do nothing in frontend code, and (3) elog(ERROR, ...) is changed to
pg_log_fatal + exit in frontend code.
Mark Dilger, reviewed and slightly revised by me.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
These two new parameters, named sslminprotocolversion and
sslmaxprotocolversion, allow to respectively control the minimum and the
maximum version of the SSL protocol used for the SSL connection attempt.
The default setting is to allow any version for both the minimum and the
maximum bounds, causing libpq to rely on the bounds set by the backend
when negotiating the protocol to use for an SSL connection. The bounds
are checked when the values are set at the earliest stage possible as
this makes the checks independent of any SSL implementation.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Cary Huang
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
In a statement like "UPDATE remote_tab SET (x,y) = (SELECT ...)",
we'd conclude that the statement could be directly executed remotely,
because the sub-SELECT is in a resjunk tlist item that's not examined
for shippability. Currently that ends up crashing if the sub-SELECT
contains any remote Vars. Prevent the crash by deeming MULTIEXEC
Params to be unshippable.
This is a bit of a brute-force solution, since if the sub-SELECT
*doesn't* contain any remote Vars, the current execution technology
would work; but that's not a terribly common use-case for this syntax,
I think. In any case, we generally don't try to ship sub-SELECTs, so
it won't surprise anybody that this doesn't end up as a remote direct
update. I'd be inclined to see if that general limitation can be fixed
before worrying about this case further.
Per report from Lukáš Sobotka.
Back-patch to 9.6. 9.5 had MULTIEXPR, but we didn't try to perform
remote direct updates then, so the case didn't arise anyway.
Discussion: https://postgr.es/m/CAJif3k+iA_ekBB5Zw2hDBaE1wtiQa4LH4_JUXrrMGwTrH0J01Q@mail.gmail.com
This function allows us to fsync the specified file or directory.
It's useful, for example, when we want to sync the file that
pg_file_write() writes out or that COPY TO exports the data into,
for durability.
Author: Fujii Masao
Reviewed-By: Julien Rouhaud, Arthur Zakirov, Michael Paquier, Atsushi Torikoshi
Discussion: https://www.postgresql.org/message-id/CAHGQGwGY8uzZ_k8dHRoW1zDcy1Z7=5GQ+So4ZkVy2u=nLsk=hA@mail.gmail.com
The strategy of GIN index scan is driven by opclass-specific extract_query
method. This method that needed search mode is GIN_SEARCH_MODE_ALL. This
mode means that matching tuple may contain none of extracted entries. Simple
example is '!term' tsquery, which doesn't need any term to exist in matching
tsvector.
In order to handle such scan key GIN calculates virtual entry, which contains
all TIDs of all entries of attribute. In fact this is full scan of index
attribute. And typically this is very slow, but allows to handle some queries
correctly in GIN. However, current algorithm calculate such virtual entry for
each GIN_SEARCH_MODE_ALL scan key even if they are multiple for the same
attribute. This is clearly not optimal.
This commit improves the situation by introduction of "exclude only" scan keys.
Such scan keys are not capable to return set of matching TIDs. Instead, they
are capable only to filter TIDs produced by normal scan keys. Therefore,
each attribute should contain at least one normal scan key, while rest of them
may be "exclude only" if search mode is GIN_SEARCH_MODE_ALL.
The same optimization might be applied to the whole scan, not per-attribute.
But that leads to NULL values elimination problem. There is trade-off between
multiple possible ways to do this. We probably want to do this later using
some cost-based decision algorithm.
Discussion: https://postgr.es/m/CAOBaU_YGP5-BEt5Cc0%3DzMve92vocPzD%2BXiZgiZs1kjY0cj%3DXBg%40mail.gmail.com
Author: Nikita Glukhov, Alexander Korotkov, Tom Lane, Julien Rouhaud
Reviewed-by: Julien Rouhaud, Tomas Vondra, Tom Lane
Introduce new fields amusemaintenanceworkmem and amparallelvacuumoptions
in IndexAmRoutine for parallel vacuum. The amusemaintenanceworkmem tells
whether a particular IndexAM uses maintenance_work_mem or not. This will
help in controlling the memory used by individual workers as otherwise,
each worker can consume memory equal to maintenance_work_mem. The
amparallelvacuumoptions tell whether a particular IndexAM participates in
a parallel vacuum and if so in which phase (bulkdelete, vacuumcleanup) of
vacuum.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Tomas Vondra and Robert Haas
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1LmcD5aPogzwim5Nn58Ki+74a6Edghx4Wd8hAskvHaq5A@mail.gmail.com
We currently have several sets of files generated from data provided
by Unicode. These all have ad hoc rules and instructions for updating
when new Unicode versions appear, and it's not done consistently.
This patch centralizes and automates the process and makes it part of
the release checklist. The Unicode and CLDR versions are specified in
Makefile.global.in. There is a new make target "update-unicode" that
downloads all the relevant files and runs the generation script.
There is also a new script for generating the table of combining
characters for ucs_wcwidth(). That table is now in a separate include
file rather than hardcoded into the middle of other code. This is
based on the script that was used for generating
d8594d123c, but the script itself wasn't
committed at that time.
Reviewed-by: John Naylor <john.naylor@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c8d05f42-443e-6c23-819b-05b31759a37c@2ndquadrant.com
Failures in allocations could lead to crashes with NULL pointer
dereferences . Memory context TopMemoryContext is used instead to keep
alive the plans allocated in the session. A more specific context could
be used here, but this is left for later.
Reported-by: Jian Zhang
Author: Michael Paquier
Reviewed-by: Tom Lane, Andres Freund
Discussion: https://postgr.es/m/16190-70181c803641c3dc@postgresql.org
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
Using \ is unnecessary and ugly, so remove that. While at it, stitch
the literals back into a single line: we've long discouraged splitting
error message literals even when they go past the 80 chars line limit,
to improve greppability.
Leave contrib/tablefunc alone.
Discussion: https://postgr.es/m/20191223195156.GA12271@alvherre.pgsql
While building a hash map of categories in load_categories_hash,
resulting category names have not thus far been checked to ensure
they are not null. Prior to pg12 null category names worked to the
extent that they did not crash on some platforms. This is because
those system libraries have an snprintf which can deal with being
passed a null pointer argument for a string. But even in those cases
null categories did nothing useful. And on some platforms it crashed.
As of pg12, our own version of snprintf gets called, and it does
not deal with null pointer arguments at all, and crashes consistently.
Fix that by disallowing null categories. They never worked usefully,
and no one has ever asked for them to work previously. Back-patch to
all supported branches.
Reported-By: Ireneusz Pluta
Discussion: https://postgr.es/m/16176-7489719b05e4303c@postgresql.org
Per project policy, transient roles created by regression test cases
should be named "regress_something", to reduce the risks of running
such cases against installed servers. And no such role should ever
be left behind after running a test.
Discussion: https://postgr.es/m/11297.1576868677@sss.pgh.pa.us
We realized years ago that it's better for libpq to accept all
connection parameters syntactically, even if some are ignored or
restricted due to lack of the feature in a particular build.
However, that lesson from the SSL support was for some reason never
applied to the GSSAPI support. This is causing various buildfarm
members to have problems with a test case added by commit 6136e94dc,
and it's just a bad idea from a user-experience standpoint anyway,
so fix it.
While at it, fix some places where parameter-related infrastructure
was added with the aid of a dartboard, or perhaps with the aid of
the anti-pattern "add new stuff at the end". It should be safe
to rearrange the contents of struct pg_conn even in released
branches, since that's private to libpq (and we'd have to move
some fields in some builds to fix this, anyway).
Back-patch to all supported branches.
Discussion: https://postgr.es/m/11297.1576868677@sss.pgh.pa.us
Currently postgres_fdw doesn't permit a non-superuser to connect to a
foreign server without specifying a password, or to use an
authentication mechanism that doesn't use the password. This is to avoid
using the settings and identity of the user running Postgres.
However, this doesn't make sense for all authentication methods. We
therefore allow a superuser to set "password_required 'false'" for user
mappings for the postgres_fdw. The superuser must ensure that the
foreign server won't try to rely solely on the server identity (e.g.
trust, peer, ident) or use an authentication mechanism that relies on the
password settings (e.g. md5, scram-sha-256).
This feature is a prelude to better support for sslcert and sslkey
settings in user mappings.
Author: Craig Ringer.
Discussion: https://postgr.es/m/075135da-545c-f958-fed0-5dcb462d6dae@2ndQuadrant.com
This patch causes EXPLAIN to always assign a separate table alias to the
parent RTE of an append relation (inheritance set); before, such RTEs
were ignored if not actually scanned by the plan. Since the child RTEs
now always have that same alias to start with (cf. commit 55a1954da),
the net effect is that the parent RTE usually gets the alias used or
implied by the query text, and the children all get that alias with "_N"
appended. (The exception to "usually" is if there are duplicate aliases
in different subtrees of the original query; then some of those original
RTEs will also have "_N" appended.)
This results in more uniform output for partitioned-table plans than
we had before: the partitioned table itself gets the original alias,
and all child tables have aliases with "_N", rather than the previous
behavior where one of the children would get an alias without "_N".
The reason for giving the parent RTE an alias, even if it isn't scanned
by the plan, is that we now use the parent's alias to qualify Vars that
refer to an appendrel output column and appear above the Append or
MergeAppend that computes the appendrel. But below the append, Vars
refer to some one of the child relations, and are displayed that way.
This seems clearer than the old behavior where a Var that could carry
values from any child relation was displayed as if it referred to only
one of them.
While at it, change ruleutils.c so that the code paths used by EXPLAIN
deal in Plan trees not PlanState trees. This effectively reverts a
decision made in commit 1cc29fe7c, which seemed like a good idea at
the time to make ruleutils.c consistent with explain.c. However,
it's problematic because we'd really like to allow executor startup
pruning to remove all the children of an append node when possible,
leaving no child PlanState to resolve Vars against. (That's not done
here, but will be in the next patch.) This requires different handling
of subplans and initplans than before, but is otherwise a pretty
straightforward change.
Discussion: https://postgr.es/m/001001d4f44b$2a2cca50$7e865ef0$@lab.ntt.co.jp
AfterTriggerExecute() retrieves a fresh tuple or pair of tuples from a
tuplestore and then stores the tuple(s) in the passed-in slot(s) if
AFTER_TRIGGER_FDW_FETCH, while it uses the most-recently-retrieved
tuple(s) stored in the slot(s) if AFTER_TRIGGER_FDW_REUSE. This was
done correctly before 12, but commit ff11e7f4b broke it by mistakenly
clearing the tuple(s) stored in the slot(s) in that function, leading to
an assertion failure as reported in bug #16139 from Alexander Lakhin.
Also, fix some other issues with the aforementioned commit in passing:
* For tg_newslot, which is a slot added to the TriggerData struct by the
commit to store new updated tuples, it didn't ensure the slot was NULL
if there was no such tuple.
* The commit failed to update the documentation about the trigger
interface.
Author: Etsuro Fujita
Backpatch-through: 12
Discussion: https://postgr.es/m/16139-94f9ccf0db6119ec%40postgresql.org
The dict_int text search dictionary template accepts maxlen parameter,
which is then used to cap the length of input strings. The value was
not properly checked, and the code simply does
txt[d->maxlen] = '\0';
to insert a terminator, leading to segfaults with negative values.
This commit simply rejects values less than 1. The issue was there since
dct_int was introduced in 9.3, so backpatch all the way back to 9.4
which is the oldest supported version.
Reported-by: cili
Discussion: https://postgr.es/m/16144-a36a5bef7657047d@postgresql.org
Backpatch-through: 9.4
EXPLAIN generally only adds schema qualifications to table names when
VERBOSE is specified. In postgres_fdw's "Relations" output, table
names were always so qualified, but that was an implementation
restriction: in the original coding, we didn't have access to the
verbose flag at the time the string was generated. After the code
rearrangement of commit 4526951d5, we do have that info available
at the right time, so make this output follow the normal rule.
Discussion: https://postgr.es/m/12424.1575168015@sss.pgh.pa.us
If an inheritance/partitioning parent table is assigned some column
alias names in the query, EXPLAIN mapped those aliases onto the
child tables' columns by physical position, resulting in bogus output
if a child table's columns aren't one-for-one with the parent's.
To fix, make expand_single_inheritance_child() generate a correctly
re-mapped column alias list, rather than just copying the parent
RTE's alias node. (We have to fill the alias field, not just
adjust the eref field, because ruleutils.c will ignore eref in
favor of looking at the real column names.)
This means that child tables will now always have alias fields in
plan rtables, where before they might not have. That results in
a rather substantial set of regression test output changes:
EXPLAIN will now always show child tables with aliases that match
the parent table (usually with "_N" appended for uniqueness).
But that seems like a net positive for understandability, since
the parent alias corresponds to something that actually appeared
in the original query, while the child table names didn't.
(Note that this does not change anything for cases where an explicit
table alias was written in the query for the parent table; it
just makes cases without such aliases behave similarly to that.)
Hence, while we could avoid these subsidiary changes if we made
inherit.c more complicated, we choose not to.
Discussion: https://postgr.es/m/12424.1575168015@sss.pgh.pa.us
The relation aliases shown in the "Relations" line for a foreign scan
didn't always agree with those used in the rest of EXPLAIN's output.
The regression test result changes appearing here provide examples.
It's really impossible for postgres_fdw to duplicate EXPLAIN's alias
assignment logic during postgresGetForeignRelSize(), because of the
de-duplication that EXPLAIN does on a global basis --- and anyway,
trying to duplicate that would be unmaintainable. Instead, just put
numeric rangetable indexes into the string, and convert those to
table names/aliases in postgresExplainForeignScan, which does have
access to the results of ruleutils.c's alias assignment logic.
Aside from being more reliable, this shifts some work from planning
to EXPLAIN, which is a good tradeoff for performance. (I also
changed from using StringInfo to using psprintf, which makes the
code slightly simpler and reduces its memory consumption.)
A kluge required by this solution is that we have to reverse-engineer
the rtoffset applied by setrefs.c. If that logic ever fails
(presumably because the member tables of a join got offset by
different amounts), we'll need some more cooperation with setrefs.c
to keep things straight. But for now, there's no need for that.
Arguably this is a back-patchable bug fix, but since this is a mostly
cosmetic issue and there have been no field complaints, I'll refrain
for now.
Discussion: https://postgr.es/m/12424.1575168015@sss.pgh.pa.us
This patch providies for support for password protected SSL client
keys in libpq, and for DER format keys, both encrypted and unencrypted.
There is a new connection parameter sslpassword, which is supplied to
the OpenSSL libraries via a callback function. The callback function can
also be set by an application by calling PQgetSSLKeyPassHook(). There is
also a function to retreive the connection setting, PQsslpassword().
Craig Ringer and Andrew Dunstan
Reviewed by: Greg Nancarrow
Discussion: https://postgr.es/m/f7ee88ed-95c4-95c1-d4bf-7b415363ab62@2ndQuadrant.com
Use SELinux "db_table: { truncate }" to check if permission is granted to
TRUNCATE. Update example SELinux policy to grant needed permission for
TRUNCATE. Add new regression test to demonstrate a positive and negative
cases. Test will only be run if the loaded SELinux policy has the
"db_table: { truncate }" permission. Makes use of recent commit which added
object TRUNCATE hook. Patch by Yuli Khodorkovskiy with minor
editorialization by me. Not back-patched because the object TRUNCATE hook
was not.
Author: Yuli Khodorkovskiy
Reviewed-by: Joe Conway
Discussion: https://postgr.es/m/CAFL5wJcomybj1Xdw7qWmPJRpGuFukKgNrDb6uVBaCMgYS9dkaA%40mail.gmail.com
Instead of deciding to serialize a transaction merely based on the
number of changes in that xact (toplevel or subxact), this makes
the decisions based on amount of memory consumed by the changes.
The memory limit is defined by a new logical_decoding_work_mem GUC,
so for example we can do this
SET logical_decoding_work_mem = '128kB'
to reduce the memory usage of walsenders or set the higher value to
reduce disk writes. The minimum value is 64kB.
When adding a change to a transaction, we account for the size in
two places. Firstly, in the ReorderBuffer, which is then used to
decide if we reached the total memory limit. And secondly in the
transaction the change belongs to, so that we can pick the largest
transaction to evict (and serialize to disk).
We still use max_changes_in_memory when loading changes serialized
to disk. The trouble is we can't use the memory limit directly as
there might be multiple subxact serialized, we need to read all of
them but we don't know how many are there (and which subxact to
read first).
We do not serialize the ReorderBufferTXN entries, so if there is a
transaction with many subxacts, most memory may be in this type of
objects. Those records are not included in the memory accounting.
We also do not account for INTERNAL_TUPLECID changes, which are
kept in a separate list and not evicted from memory. Transactions
with many CTID changes may consume significant amounts of memory,
but we can't really do much about that.
The current eviction algorithm is very simple - the transaction is
picked merely by size, while it might be useful to also consider age
(LSN) of the changes for example. With the new Generational memory
allocator, evicting the oldest changes would make it more likely
the memory gets actually pfreed.
The logical_decoding_work_mem can be set in postgresql.conf, in which
case it serves as the default for all publishers on that instance.
Author: Tomas Vondra, with changes by Dilip Kumar and Amit Kapila
Reviewed-by: Dilip Kumar and Amit Kapila
Tested-By: Vignesh C
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
postgres_fdw does not support two-phase transactions, so let's add a
small negative test case to check after it. Note that this is checked
using an end-of-xact callback to ensure a proper connection cleanup with
the foreign server, which is called before checking if a server is able
to handle 2PC with max_prepared_xacts, so this test does not need an
alternate output file.
Author: Gilles Darold
Discussion: https://postgr.es/m/20191108090507.GC1768@paquier.xyz
Currently, postgres_fdw does not support preparing a remote transaction
for two-phase commit even in the case where the remote transaction is
read-only, but the old error message appeared to imply that that was not
supported only if the remote transaction modified remote tables. Change
the message so as to include the case where the remote transaction is
read-only.
Also fix a comment above the message.
Also add a note about the lack of supporting PREPARE TRANSACTION to the
postgres_fdw documentation.
Reported-by: Gilles Darold
Author: Gilles Darold and Etsuro Fujita
Reviewed-by: Michael Paquier and Kyotaro Horiguchi
Backpatch-through: 9.4
Discussion: https://postgr.es/m/08600ed3-3084-be70-65ba-279ab19618a5%40darold.net
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
Historically, the code to build relation options has been shaped the
same way in multiple code paths by using a set of datums in input with
the options parsed with a static table which is then filled with the
option values. This introduces a new common routine in reloptions.c to
do most of the legwork for the in-core code paths.
Author: Amit Langote
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CA+HiwqGsoSn_uTPPYT19WrtR7oYpYtv4CdS0xuedTKiHHWuk_g@mail.gmail.com
DatumGetPointer() takes a Datum argument, not a pointer.
This is cosmetic given the current definitions of the
underlying macros, but it's still formally a type violation.
Bug was introduced in commit 389bb2818, but there seems
no need to back-patch.
Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/d8jlfsxq3a0.fsf@dalvik.ping.uio.no
This gives an alternative way of catching exceptions, for the common
case where the cleanup code is the same in the error and non-error
cases. So instead of
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_CATCH();
{
cleanup();
PG_RE_THROW();
}
PG_END_TRY();
cleanup();
one can write
PG_TRY();
{
... code that might throw ereport(ERROR) ...
}
PG_FINALLY();
{
cleanup();
}
PG_END_TRY();
Discussion: https://www.postgresql.org/message-id/flat/95a822c3-728b-af0e-d7e5-71890507ae0c%402ndquadrant.com
The basic rule we follow here is to always first include 'postgres.h' or
'postgres_fe.h' whichever is applicable, then system header includes and
then Postgres header includes. In this, we also follow that all the
Postgres header includes are in order based on their ASCII value. We
generally follow these rules, but the code has deviated in many places.
This commit makes it consistent just for contrib modules. The later
commits will enforce similar rules in other parts of code.
Author: Vignesh C
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
1df5875 has changed the way dependencies are dropped for this command
with inheritance trees, which impacts sepgsql. This just updates the
regression test output to take care of the failures and adapt to the new
code.
Reported by buildfarm member rhinoceros.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20191013101331.GC1434@paquier.xyz
Backpatch-through: 12
Relation options can define a lock mode other than AccessExclusiveMode
since 47167b7, but modules defining custom relation options did not
really have a way to enforce that. Correct that by extending the
current API set so as modules can define a custom lock mode.
Author: Michael Paquier
Reviewed-by: Kuntal Ghosh
Discussion: https://postgr.es/m/20190920013831.GD1844@paquier.xyz
In-core relation options can use a custom lock mode since 47167b7, that
has lowered the lock available for some autovacuum parameters. However
it forgot to consider custom relation options. This causes failures
with ALTER TABLE SET when changing a custom relation option, as its lock
is not defined. The existing APIs to define a custom reloption does not
allow to define a custom lock mode, so enforce its initialization to
AccessExclusiveMode which should be safe enough in all cases. An
upcoming patch will extend the existing APIs to allow a custom lock mode
to be defined.
The problem can be reproduced with bloom indexes, so add a test there.
Reported-by: Nikolay Sharplov
Analyzed-by: Thomas Munro, Michael Paquier
Author: Michael Paquier
Reviewed-by: Kuntal Ghosh
Discussion: https://postgr.es/m/20190920013831.GD1844@paquier.xyz
Backpatch-through: 9.6
When a relation is truncated, shared_buffers needs to be scanned
so that any buffers for the relation forks are invalidated in it.
Previously, shared_buffers was scanned for each relation forks, i.e.,
MAIN, FSM and VM, when VACUUM truncated off any empty pages
at the end of relation or TRUNCATE truncated the relation in place.
Since shared_buffers needed to be scanned multiple times,
it could take a long time to finish those commands especially
when shared_buffers was large.
This commit changes the logic so that shared_buffers is scanned only
one time for those three relation forks.
Author: Kirk Jamison
Reviewed-by: Masahiko Sawada, Thomas Munro, Alvaro Herrera, Takayuki Tsunakawa and Fujii Masao
Discussion: https://postgr.es/m/D09B13F772D2274BB348A310EE3027C64E2067@g01jpexmbkw24
After more discussion, the new function added by ddbd5d8 could have been
designed in a better way. Based on an idea from Álvaro, instead of
returning one column which includes both the raw and combined flags, use
two columns, with one for the raw flags and one for the combined flags.
This also takes care of some issues with HEAP_LOCKED_UPGRADED and
HEAP_XMAX_IS_LOCKED_ONLY which are not really combined flags as they
depend on conditions defined by other raw bits, as mentioned by Amit.
While on it, fix an extra issue with combined flags. A combined flag
was returned if at least one of its bits was set, but all its bits need
to be set to include it in the result.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Amit Kapila
Discussion: https://postgr.es/m/20190913114950.GA3824@alvherre.pgsql
Flags of t_infomask and t_infomask2 for each tuple are already included
in the information returned by heap_page_items as integers, and we
lacked a way to make that information human-readable.
Per discussion, the function includes an option which controls if
combined flags should be decomposed or not. The default is false, to
not decompose combined flags.
The module is bumped to version 1.8.
Author: Craig Ringer, Sawada Masahiko
Reviewed-by: Peter Geoghegan, Robert Haas, Álvaro Herrera, Moon Insung,
Amit Kapila, Michael Paquier, Tomas Vondra
Discussion: https://postgr.es/m/CAMsr+YEY7jeaXOb+oX+RhDyOFuTMdmHjGsBxL=igCm03J0go9Q@mail.gmail.com
As originally coded, the script would fail on Windows 10 and Python 3
because stdout would not be switched to UTF-8 only for Python 2. This
patch makes that apply to both versions.
Also add python 2 compatibility markers so that we know what to remove
once we drop support for that. Also use a "with" clause to ensure file
descriptor is closed promptly.
Author: Hugh Ranalli, Ramanarayana
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAKm4Xs7_61XMyOWmHs3n0mmkS0O4S0pvfWk=7cQ5P0gs177f7A@mail.gmail.com
Discussion: https://postgr.es/m/15548-cef1b3f8de190d4f@postgresql.org
Doing the switch reduces the footprint of "progname" in both utilities
for the messages produced. This also cleans up a couple of
inconsistencies in the message formats.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Peter Eisentraut
Discussion: https://postgr.es/m/20190820012819.GA8326@paquier.xyz
For most uses of acl.h the details of how "Acl" internally looks like
are irrelevant. It might make sense to move a lot of the
implementation details into a separate header at a later point.
The main motivation of this change is to avoid including fmgr.h (via
array.h, which needs it for exposed structs) in a lot of files that
otherwise don't need it. A subsequent commit will remove the fmgr.h
include from a lot of files.
Directly include utils/array.h and utils/expandeddatum.h from the
files that need them, but previously included them indirectly, via
acl.h.
Author: Andres Freund
Discussion: https://postgr.es/m/20190803193733.g3l3x3o42uv4qj7l@alap3.anarazel.de
contrib/amcheck failed to consider the possibility that unlogged
relations will not have any main relation fork files when running in hot
standby mode. This led to low-level "can't happen" errors that complain
about the absence of a relfilenode file.
To fix, simply skip verification of unlogged index relations during
recovery. In passing, add a direct check for the presence of a main
fork just before verification proper begins, so that we cleanly verify
the presence of the main relation fork file.
Author: Andrey Borodin, Peter Geoghegan
Reported-By: Andrey Borodin
Diagnosed-By: Andrey Borodin
Discussion: https://postgr.es/m/DA9B33AC-53CB-4643-96D4-7A0BBC037FA1@yandex-team.ru
Backpatch: 10-, where amcheck was introduced.
In the wake of commit 1cff1b95a, the result of list_concat no longer
shares the ListCells of the second input. Therefore, we can replace
"list_concat(x, list_copy(y))" with just "list_concat(x, y)".
To improve call sites that were list_copy'ing the first argument,
or both arguments, invent "list_concat_copy()" which produces a new
list sharing no ListCells with either input. (This is a bit faster
than "list_concat(list_copy(x), y)" because it makes the result list
the right size to start with.)
In call sites that were not list_copy'ing the second argument, the new
semantics mean that we are usually leaking the second List's storage,
since typically there is no remaining pointer to it. We considered
inventing another list_copy variant that would list_free the second
input, but concluded that for most call sites it isn't worth worrying
about, given the relative compactness of the new List representation.
(Note that in cases where such leakage would happen, the old code
already leaked the second List's header; so we're only discussing
the size of the leak not whether there is one. I did adjust two or
three places that had been troubling to free that header so that
they manually free the whole second List.)
Patch by me; thanks to David Rowley for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
contrib/intarray considers "arraycol <@ constant-array" to be indexable,
but its GiST opclass code fails to reliably find index entries for empty
array values (which of course should trivially match such queries).
This is because the test condition to see whether we should descend
through a non-leaf node is wrong.
Unfortunately, empty array entries could be anywhere in the index,
as these index opclasses are currently designed. So there's no way
to fix this except by lobotomizing <@ indexscans to scan the whole
index ... which is what this patch does. That's pretty unfortunate:
the performance is now actually worse than a seqscan, in most cases.
We'd be better off to remove <@ from the GiST opclasses entirely,
and perhaps a future non-back-patchable patch will do so.
In the meantime, applications whose performance is adversely impacted
have a couple of options. They could switch to a GIN index, which
doesn't have this bug, or they could replace "arraycol <@ constant-array"
with "arraycol <@ constant-array AND arraycol && constant-array".
That will provide about the same performance as before, and it will find
all non-empty subsets of the given constant-array, which is all that
could reliably be expected of the query before.
While at it, add some more regression test cases to improve code
coverage of contrib/intarray.
In passing, adjust resize_intArrayType so that when it's returning an
empty array, it uses construct_empty_array for that rather than
cowboy hacking on the input array. While the hack produces an array
that looks valid for most purposes, it isn't bitwise equal to empty
arrays produced by other code paths, which could have subtle odd
effects. I don't think this code path is performance-critical
enough to justify such shortcuts. (Back-patch this part only as far
as v11; before commit 01783ac36 we were not careful about this in
other intarray code paths either.)
Back-patch the <@ fixes to all supported versions, since this was
broken from day one.
Patch by me; thanks to Alexander Korotkov for review.
Discussion: https://postgr.es/m/458.1565114141@sss.pgh.pa.us
Perl has multiple internal representations of "undef", and just
testing for SvTYPE(x) == SVt_NULL doesn't recognize all of them,
leading to "cannot transform this Perl type to jsonb" errors.
Use the approved test SvOK() instead.
Report and patch by Ivan Panchenko. Back-patch to v11 where
this module was added.
Discussion: https://postgr.es/m/1564783533.324795401@f193.i.mail.ru
When piling up loading of modules using check_password_hook_type,
loading passwordcheck would remove any trace of a previously-loaded
hook. Unloading the module would also cause previous hooks to be
entirely gone.
Reported-by: Rafael Castro
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/15932-78f48f9ef166778c@postgresql.org
Backpatch-through: 9.4
As of Fedora 30, it seems that the system-provided macros for setting
up user privileges in SELinux policies don't grant the ability to read
/etc/passwd, as they formerly did. This restriction breaks psql
(which tries to use getpwuid() to obtain the user name it's running
under) and thereby the contrib/sepgsql regression test. Add explicit
specifications that we need the right to read /etc/passwd.
Mike Palmiotto, per a report from me. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/23856.1563381159@sss.pgh.pa.us
When we already know the length that we're going to append, then it
makes sense to use appendBinaryStringInfo instead of
appendStringInfoString so that the append can be performed with a simple
memcpy() using a known length rather than having to first perform a
strlen() call to obtain the length.
Discussion: https://postgr.es/m/CAKJS1f8+FRAM1s5+mAa3isajeEoAaicJ=4e0WzrH3tAusbbiMQ@mail.gmail.com
Solely relying on a relation's reltuples/relpages estimate to size the
Bloom filters used by amcheck verification makes verification less
effective when the estimates are very stale. In extreme cases,
verification options that use Bloom filters internally could be totally
ineffective, without users receiving any clear indication that certain
types of corruption might easily be missed.
To fix, use RelationGetNumberOfBlocks() instead of relpages to size the
downlink block Bloom filter. Use the same RelationGetNumberOfBlocks()
value to derive a minimum size for the heapallindexed Bloom filter,
rather than completely trusting reltuples. Verification will still be
reasonably effective when the projected/estimated number of Bloom filter
elements is at least 1/5 of the final number of elements, which is
assured by the new sizing logic.
Reported-By: Alexander Korotkov
Discussion: https://postgr.es/m/CAH2-Wzk0ke2J42KrNYBKu0Xovjy-sU5ub7PWjgpbsKdAQcL4OA@mail.gmail.com
Backpatch: 11-, where downlink/heapallindexed verification were added.
The aggregate-order difference explained in my previous commit
turns out to also affect the order of log entries emitted in the
contrib/sepgsql regression test. Per buildfarm.
Discussion: https://postgr.es/m/21272.1563318411@sss.pgh.pa.us
This is numbered take 7, and addresses a set of issues around:
- Fixes for typos and incorrect reference names.
- Removal of unneeded comments.
- Removal of unreferenced functions and structures.
- Fixes regarding variable name consistency.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/10bfd4ac-3e7c-40ab-2b2e-355ed15495e8@gmail.com
Originally, Postgres Lists were a more or less exact reimplementation of
Lisp lists, which consist of chains of separately-allocated cons cells,
each having a value and a next-cell link. We'd hacked that once before
(commit d0b4399d8) to add a separate List header, but the data was still
in cons cells. That makes some operations -- notably list_nth() -- O(N),
and it's bulky because of the next-cell pointers and per-cell palloc
overhead, and it's very cache-unfriendly if the cons cells end up
scattered around rather than being adjacent.
In this rewrite, we still have List headers, but the data is in a
resizable array of values, with no next-cell links. Now we need at
most two palloc's per List, and often only one, since we can allocate
some values in the same palloc call as the List header. (Of course,
extending an existing List may require repalloc's to enlarge the array.
But this involves just O(log N) allocations not O(N).)
Of course this is not without downsides. The key difficulty is that
addition or deletion of a list entry may now cause other entries to
move, which it did not before.
For example, that breaks foreach() and sister macros, which historically
used a pointer to the current cons-cell as loop state. We can repair
those macros transparently by making their actual loop state be an
integer list index; the exposed "ListCell *" pointer is no longer state
carried across loop iterations, but is just a derived value. (In
practice, modern compilers can optimize things back to having just one
loop state value, at least for simple cases with inline loop bodies.)
In principle, this is a semantics change for cases where the loop body
inserts or deletes list entries ahead of the current loop index; but
I found no such cases in the Postgres code.
The change is not at all transparent for code that doesn't use foreach()
but chases lists "by hand" using lnext(). The largest share of such
code in the backend is in loops that were maintaining "prev" and "next"
variables in addition to the current-cell pointer, in order to delete
list cells efficiently using list_delete_cell(). However, we no longer
need a previous-cell pointer to delete a list cell efficiently. Keeping
a next-cell pointer doesn't work, as explained above, but we can improve
matters by changing such code to use a regular foreach() loop and then
using the new macro foreach_delete_current() to delete the current cell.
(This macro knows how to update the associated foreach loop's state so
that no cells will be missed in the traversal.)
There remains a nontrivial risk of code assuming that a ListCell *
pointer will remain good over an operation that could now move the list
contents. To help catch such errors, list.c can be compiled with a new
define symbol DEBUG_LIST_MEMORY_USAGE that forcibly moves list contents
whenever that could possibly happen. This makes list operations
significantly more expensive so it's not normally turned on (though it
is on by default if USE_VALGRIND is on).
There are two notable API differences from the previous code:
* lnext() now requires the List's header pointer in addition to the
current cell's address.
* list_delete_cell() no longer requires a previous-cell argument.
These changes are somewhat unfortunate, but on the other hand code using
either function needs inspection to see if it is assuming anything
it shouldn't, so it's not all bad.
Programmers should be aware of these significant performance changes:
* list_nth() and related functions are now O(1); so there's no
major access-speed difference between a list and an array.
* Inserting or deleting a list element now takes time proportional to
the distance to the end of the list, due to moving the array elements.
(However, it typically *doesn't* require palloc or pfree, so except in
long lists it's probably still faster than before.) Notably, lcons()
used to be about the same cost as lappend(), but that's no longer true
if the list is long. Code that uses lcons() and list_delete_first()
to maintain a stack might usefully be rewritten to push and pop at the
end of the list rather than the beginning.
* There are now list_insert_nth...() and list_delete_nth...() functions
that add or remove a list cell identified by index. These have the
data-movement penalty explained above, but there's no search penalty.
* list_concat() and variants now copy the second list's data into
storage belonging to the first list, so there is no longer any
sharing of cells between the input lists. The second argument is
now declared "const List *" to reflect that it isn't changed.
This patch just does the minimum needed to get the new implementation
in place and fix bugs exposed by the regression tests. As suggested
by the foregoing, there's a fair amount of followup work remaining to
do.
Also, the ENABLE_LIST_COMPAT macros are finally removed in this
commit. Code using those should have been gone a dozen years ago.
Patch by me; thanks to David Rowley, Jesper Pedersen, and others
for review.
Discussion: https://postgr.es/m/11587.1550975080@sss.pgh.pa.us
This adds a built-in function to generate UUIDs.
PostgreSQL hasn't had a built-in function to generate a UUID yet,
relying on external modules such as uuid-ossp and pgcrypto to provide
one. Now that we have a strong random number generator built-in, we
can easily provide a version 4 (random) UUID generation function.
This patch takes the existing function gen_random_uuid() from pgcrypto
and makes it a built-in function. The pgcrypto implementation now
internally redirects to the built-in one.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/6a65610c-46fc-2323-6b78-e8086340a325@2ndquadrant.com
Performance of a SELECT FOR UPDATE may be quite distinct from the
non-UPDATE version of the query, so treat all of the FOR UPDATE clause
as being significant for distinguishing queries.
Andrew Gierth and Vik Fearing, reviewed by Sergei Kornilov, Thomas
Munro, Tom Lane
Discussion: https://postgr.es/m/87h8e4hfwv.fsf@news-spur.riddles.org.uk
This addresses a couple of issues in the code:
- Typos and inconsistencies in comments and function declarations.
- Removal of unreferenced function declarations.
- Removal of unnecessary compile flags.
- A cleanup error in regressplans.sh.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/0c991fdf-2670-1997-c027-772a420c4604@gmail.com
This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
Previously, in the loop in postgresAcquireSampleRowsFunc() to iterate
fetching rows from a given remote table, we redundantly 1) determined the
fetch size by parsing the table's server/table-level options and then 2)
constructed the fetch command; remove that redundancy.
Author: Etsuro Fujita
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAPmGK17_urk9qkLV65_iYMFw64z5qhdfhY=tMVV6Jg4KNYx8+w@mail.gmail.com
In commit 18555b132 we tentatively established a rule that regression
tests should use names containing "regression" for databases, and names
starting with "regress_" for all other globally-visible object names, so
as to circumscribe the side-effects that "make installcheck" could have on
an existing installation. However, no enforcement mechanism was created,
so it's unsurprising that some new violations have crept in since then.
In fact, a whole new *category* of violations has crept in, to wit we now
also have globally-visible subscription and replication origin names, and
"make installcheck" could very easily clobber user-created objects of
those types. So it's past time to do something about this.
This commit sanitizes the tests enough that they will pass (i.e. not
generate any visible warnings) with the enforcement mechanism I'll add
in the next commit. There are some TAP tests that still trigger the
warnings, but the warnings do not cause test failure. Since these tests
do not actually run against a pre-existing installation, there's no need
to worry whether they could conflict with user-created objects.
The problem with rolenames.sql testing special role names like "user"
is still there, and is dealt with only very cosmetically in this patch
(by hiding the warnings :-(). What we actually need to do to be safe is
to take that test script out of "make installcheck" altogether, but that
seems like material for a separate patch.
Discussion: https://postgr.es/m/16638.1468620817@sss.pgh.pa.us
Commit aa09cd242 modified estimate_path_cost_size() so that it reuses
cached costs of a basic foreign path for a given foreign-base/join
relation when costing pre-sorted foreign paths for that relation, but it
incorrectly re-computed retrieved_rows, an estimated number of rows
fetched from the remote side, which is needed for costing both the basic
and pre-sorted foreign paths. To fix, handle retrieved_rows the same way
as the cached costs: store in that relation's fpinfo the retrieved_rows
estimate computed for costing the basic foreign path, and reuse it when
costing the pre-sorted foreign paths. Also, reuse the rows/width
estimates stored in that relation's fpinfo when costing the pre-sorted
foreign paths, to make the code consistent.
In commit ffab494a4, to extend the costing mentioned above to the
foreign-grouping case, I made a change to add_foreign_grouping_paths() to
store in a given foreign-grouped relation's RelOptInfo the rows estimate
for that relation for reuse, but this patch makes that change unnecessary
since we already store the row estimate in that relation's fpinfo, which
this patch reuses when costing a foreign path for that relation with the
sortClause ordering; remove that change.
In passing, fix thinko in commit 7012b132d: in estimate_path_cost_size(),
the width estimate for a given foreign-grouped relation to be stored in
that relation's fpinfo was reset incorrectly when costing a basic foreign
path for that relation with local stats.
Apply the patch to HEAD only to avoid destabilizing existing plan choices.
Author: Etsuro Fujita
Discussion: https://postgr.es/m/CAPmGK17jaJLPDEkgnP2VmkOg=5wT8YQ1CqssU8JRpZ_NSE+dqQ@mail.gmail.com
Previously, in postgresPlanForeignModify, we planned an UPDATE operation
on a foreign table so that we transmit only columns that were explicitly
targets of the UPDATE, so as to avoid unnecessary data transmission, but
if there were BEFORE ROW UPDATE triggers on the foreign table, those
triggers might change values for non-target columns, in which case we
would miss sending changed values for those columns. Prevent optimizing
away transmitting all columns if there are BEFORE ROW UPDATE triggers on
the foreign table.
This is an oversight in commit 7cbe57c34 which added triggers on foreign
tables, so apply the patch all the way back to 9.4 where that came in.
Author: Shohei Mochizuki
Reviewed-by: Amit Langote
Discussion: https://postgr.es/m/201905270152.x4R1q3qi014550@toshiba.co.jp
Descriptions of pg_trgm GUC options have % replaced with %% like it was
a printf-like format. But that's not needed since they are just plain strings.
This commit fixed that. Backpatch to last supported version since this error
present from the beginning.
Reported-by: Masahiko Sawada
Discussion: https://postgr.es/m/CAD21AoAgPKODUsu9gqUFiNqEOAqedStxJ-a0sapsJXWWAVp%3Dxg%40mail.gmail.com
Backpatch-through: 9.4
It's harmless to call PQfreemem() with a NULL argument, so the only
consequence was that if allocating 'schema' failed, but allocating 'table'
or 'field' succeeded, we would leak a bit of memory. That's highly
unlikely to happen, so this is just academical, but let's get it right.
Per bug #15838 from Timur Birsh. Backpatch back to 9.5, where the
PQfreemem() calls were introduced.
Discussion: https://www.postgresql.org/message-id/15838-3221652c72c5e69d@postgresql.org
A parallel worker process should not be making any decisions of its
own about whether to auto-explain. If the parent session process
passed down flags asking for instrumentation data, do that, otherwise
not. Trying to enable instrumentation anyway leads to bugs like the
"could not find key N in shm TOC" failure reported in bug #15821
from Christian Hofstaedtler.
We can implement this cheaply by piggybacking on the existing logic
for not doing anything when we've chosen not to sample a statement.
While at it, clean up some tin-eared coding related to the sampling
feature, including an off-by-one error that meant that asking for 1.0
sampling rate didn't actually result in sampling every statement.
Although the specific case reported here only manifested in >= v11,
I believe that related misbehaviors can be demonstrated in any version
that has parallel query; and the off-by-one error is certainly there
back to 9.6 where that feature was added. So back-patch to 9.6.
Discussion: https://postgr.es/m/15821-5eb422e980594075@postgresql.org
Perl likes to redefine the _() macro:
#ifdef CAN_PROTOTYPE
#define _(args) args
#else ...
There was lots not to like about the way we dealt with this before:
1. Instead of taking care of the conflict centrally in plperl.h, we
expected every one of its ever-growing number of includers to do so.
This is duplicative and error-prone in itself, plus it means that
plperl.h fails to meet the expectation of being compilable standalone,
resulting in macro-redefinition warnings in cpluspluscheck.
2. We left _() with its Perl definition, meaning that if someone tried
to use it in any Perl-related extension, it would silently fail to
provide run-time translation. I don't see any live bugs of this ilk,
but it's clearly a hard-to-notice bug waiting to happen.
So fix that by centralizing the cleanup logic, making it match what
we're already doing for other macro conflicts with Perl. Since we only
expect plperl.h to be included by extensions not core code, we should
redefine _() as dgettext() not gettext().
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
75445c1 has caused various failures in tests across the tree after
updating some error messages, so fix the newly-expected output.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/8332.1558048838@sss.pgh.pa.us
The term "item pointer" should not be used to refer to ItemIdData
variables, since that is needlessly ambiguous. Only
ItemPointerData/ItemPointer variables should be called item pointers.
To fix, establish the convention that ItemIdData variables should always
be referred to either as "item identifiers" or "line pointers". The
term "item identifier" already predominates in docs and translatable
messages, and so should be the preferred alternative there.
Discussion: https://postgr.es/m/CAH2-Wz=c=MZQjUzde3o9+2PLAPuHTpVZPPdYxN=E4ndQ2--8ew@mail.gmail.com
In commit 7012b132d0, which added support for aggregate pushdown in
postgres_fdw, the expense of evaluating the final scan/join target
computed by make_group_input_target() was not accounted for at all in
costing aggregate pushdown paths with local statistics. The right fix
for this would be to have a separate upper stage to adjust the final
scan/join relation (see comments for apply_scanjoin_target_to_paths());
but for now, fix by adding the tlist eval cost when costing aggregate
pushdown paths with local statistics.
Apply this to HEAD only to avoid destabilizing existing plan choices.
Author: Etsuro Fujita
Reviewed-By: Antonin Houska
Discussion: https://postgr.es/m/5C66A056.60007%40lab.ntt.co.jp
The right way for IsCatalogRelation/Class to behave is to return true
for OIDs less than FirstBootstrapObjectId (not FirstNormalObjectId),
without any of the ad-hoc fooling around with schema membership.
The previous code was wrong because (1) it claimed that
information_schema tables were not catalog relations but their toast
tables were, which is silly; and (2) if you dropped and recreated
information_schema, which is a supported operation, the behavior
changed. That's even sillier. With this definition, "catalog
relations" are exactly the ones traceable to the postgres.bki data,
which seems like what we want.
With this simplification, we don't actually need access to the pg_class
tuple to identify a catalog relation; we only need its OID. Hence,
replace IsCatalogClass with "IsCatalogRelationOid(oid)". But keep
IsCatalogRelation as a convenience function.
This allows fixing some arguably-wrong semantics in contrib/sepgsql and
ReindexRelationConcurrently, which were using an IsSystemNamespace test
where what they really should be using is IsCatalogRelationOid. The
previous coding failed to protect toast tables of system catalogs, and
also was not on board with the general principle that user-created tables
do not become catalogs just by virtue of being renamed into pg_catalog.
We can also get rid of a messy hack in ReindexMultipleTables.
While we're at it, also rename IsSystemNamespace to IsCatalogNamespace,
because the previous name invited confusion with the more expansive
semantics used by IsSystemRelation/Class.
Also improve the comments in catalog.c.
There are a few remaining places in replication-related code that are
special-casing OIDs below FirstNormalObjectId. I'm inclined to think
those are wrong too, and if there should be any special case it should
just extend to FirstBootstrapObjectId. But first we need to debate
whether a FOR ALL TABLES publication should include information_schema.
Discussion: https://postgr.es/m/21697.1557092753@sss.pgh.pa.us
Discussion: https://postgr.es/m/15150.1557257111@sss.pgh.pa.us
This feature was using a process local map to track the first few blocks
in the relation. The map was reset each time we get the block with enough
freespace. It was discussed that it would be better to track this map on
a per-relation basis in relcache and then invalidate the same whenever
vacuum frees up some space in the page or when FSM is created. The new
design would be better both in terms of API design and performance.
List of commits reverted, in reverse chronological order:
06c8a5090e Improve code comments in b0eaa4c51b.
13e8643bfc During pg_upgrade, conditionally skip transfer of FSMs.
6f918159a9 Add more tests for FSM.
9c32e4c350 Clear the local map when not used.
29d108cdec Update the documentation for FSM behavior..
08ecdfe7e5 Make FSM test portable.
b0eaa4c51b Avoid creation of the free space map for small heap relations.
Discussion: https://postgr.es/m/20190416180452.3pm6uegx54iitbt5@alap3.anarazel.de
When reindexing individual indexes on pg_class it was possible to
either trigger an assertion failure:
TRAP: FailedAssertion("!(!ReindexIsProcessingIndex(((index)->rd_id)))
That's because reindex_index() called SetReindexProcessing() - which
enables an asserts ensuring no index insertions happen into the index
- before calling RelationSetNewRelfilenode(). That not correct for
indexes on pg_class, because RelationSetNewRelfilenode() updates the
relevant pg_class row, which needs to update the indexes.
The are two reasons this wasn't noticed earlier. Firstly the bug
doesn't trigger when reindexing all of pg_class, as reindex_relation
has code "hiding" all yet-to-be-reindexed indexes. Secondly, the bug
only triggers when the the update to pg_class doesn't turn out to be a
HOT update - otherwise there's no index insertion to trigger the
bug. Most of the time there's enough space, making this bug hard to
trigger.
To fix, move RelationSetNewRelfilenode() to before the
SetReindexProcessing() (and, together with some other code, to outside
of the PG_TRY()).
To make sure the error checking intended by SetReindexProcessing() is
more robust, modify CatalogIndexInsert() to check
ReindexIsProcessingIndex() even when the update is a HOT update.
Also add a few regression tests for REINDEXing of system catalogs.
The last two improvements would have prevented some of the issues
fixed in 5c1560606d from being introduced in the first place.
Reported-By: Michael Paquier
Diagnosed-By: Tom Lane and Andres Freund
Author: Andres Freund
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20190418011430.GA19133@paquier.xyz
Backpatch: 9.4-, the bug is present in all branches
foreign_grouping_ok() is willing to put fairly arbitrary expressions into
the targetlist of a remote SELECT that's doing grouping or aggregation on
the remote side, including expressions that have no foreign component to
them at all. This is possibly a bit dubious from an efficiency standpoint;
but it rises to the level of a crash-causing bug if the expression is just
a Param or non-foreign Var. In that case, the expression will necessarily
also appear in the fdw_exprs list of values we need to send to the remote
server, and then setrefs.c's set_foreignscan_references will mistakenly
replace the fdw_exprs entry with a Var referencing the targetlist result.
The root cause of this problem is bad design in commit e7cb7ee14: it put
logic into set_foreignscan_references that IMV is postgres_fdw-specific,
and yet this bug shows that it isn't postgres_fdw-specific enough. The
transformation being done on fdw_exprs assumes that fdw_exprs is to be
evaluated with the fdw_scan_tlist as input, which is not how postgres_fdw
uses it; yet it could be the right thing for some other FDW. (In the
bigger picture, setrefs.c has no business assuming this for the other
expression fields of a ForeignScan either.)
The right fix therefore would be to expand the FDW API so that the
FDW could inform setrefs.c how it intends to evaluate these various
expressions. We can't change that in the back branches though, and we
also can't just summarily change setrefs.c's behavior there, or we're
likely to break external FDWs.
As a stopgap, therefore, hack up postgres_fdw so that it won't attempt
to send targetlist entries that look exactly like the fdw_exprs entries
they'd produce. In most cases this actually produces a superior plan,
IMO, with less data needing to be transmitted and returned; so we probably
ought to think harder about whether we should ship tlist expressions at
all when they don't contain any foreign Vars or Aggs. But that's an
optimization not a bug fix so I left it for later. One case where this
produces an inferior plan is where the expression in question is actually
a GROUP BY expression: then the restriction prevents us from using remote
grouping. It might be possible to work around that (since that would
reduce to group-by-a-constant on the remote side); but it seems like a
pretty unlikely corner case, so I'm not sure it's worth expending effort
solely to improve that. In any case the right long-term answer is to fix
the API as sketched above, and then revert this hack.
Per bug #15781 from Sean Johnston. Back-patch to v10 where the problem
was introduced.
Discussion: https://postgr.es/m/15781-2601b1002bad087c@postgresql.org
Adopt a more defensive approach to accessing index tuples in
contrib/amcheck: verify that each line pointer looks sane before
accessing associated tuple using pointer arithmetic based on line
pointer's offset. This avoids undefined behavior and assertion failures
in cases where line pointers are corrupt.
Issue spotted following a complaint about an assertion failure by
Grigory Smolkin, which involved a test harness that deliberately
corrupts indexes.
This is arguably a bugfix, but no backpatch given the lack of field
reports beyond Grigory's.
Discussion: https://postgr.es/m/CAH2-WzmkurhCqnyLHxk0VkOZqd49+ZZsp1xAJOg7j2x7dmp_XQ@mail.gmail.com
Commit 3d956d9562 added support for update row movement in postgres_fdw.
This patch fixes the following issues introduced by that commit:
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel that would be updated later, the UPDATE that
used a direct modification plan modified those routed rows incorrectly
because those routed rows were visible to the later UPDATE command.
The right fix for this would be to have some way in postgres_fdw in
which the later UPDATE command ignores those routed rows, but it seems
hard to do so with the current infrastructure. For now throw an error
in that case.
* When a remote partition chosen to insert routed rows into was also an
UPDATE subplan target rel, fmstate created for the UPDATE that used a
non-direct modification plan was mistakenly overridden by another
fmstate created for inserting those routed rows into the partition.
This caused 1) server crash when the partition would be updated later,
and 2) resource leak when the partition had been already updated. To
avoid that, adjust the treatment of the fmstate for the inserting. As
for #1, since we would also have the incorrectness issue as mentioned
above, error out in that case as well.
Update the docs to mention that postgres_fdw currently does not handle
the case where a remote partition chosen to insert a routed row into is
also an UPDATE subplan target rel that will be updated later.
Author: Amit Langote and Etsuro Fujita
Reviewed-by: Amit Langote
Backpatch-through: 11 where row movement in postgres_fdw was added
Discussion: https://postgr.es/m/21e7eaa4-0d4d-20c2-a1f7-c7e96f4ce440@lab.ntt.co.jp
As reported by Tom, when ExecStoreMinimalTuple() had to perform a
conversion to store the minimal tuple in the slot, it forgot to
respect the shouldFree flag, and leaked the tuple into the current
memory context if true. Fix that by freeing the tuple in that case.
Looking at the relevant code made me (Andres) realize that not having
the shouldFree parameter to ExecForceStoreHeapTuple() was a bad
idea. Some callers had to locally implement the necessary logic, and
in one case it was missing, creating a potential per-group leak in
non-hashed aggregation.
The choice to not free the tuple in ExecComputeStoredGenerated() is
not pretty, but not introduced by this commit - I'll start a separate
discussion about it.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/366.1555382816@sss.pgh.pa.us
Such calls can confuse the reader as strcmp() uses an integer as result.
The places patched here have been spotted by Thomas Munro, David Rowley
and myself.
Author: Michael Paquier
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/20190411021946.GG2728@paquier.xyz
Fix some places where we might fail to do Py_DECREF() on a Python
object (thereby leaking it for the rest of the session). Almost
all of the risks were in error-recovery paths, which we don't really
expect to hit anyway. Hence, while this is definitely a bug fix,
it doesn't quite seem worth back-patching.
Nikita Glukhov, Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/28053a7d-10d8-fc23-b05c-b4749c873f63@postgrespro.ru
Similarly to the set of parameters for keepalive, a connection parameter
for libpq is added as well as a backend GUC, called tcp_user_timeout.
Increasing the TCP user timeout is useful to allow a connection to
survive extended periods without end-to-end connection, and decreasing
it allows application to fail faster. By default, the parameter is 0,
which makes the connection use the system default, and follows a logic
close to the keepalive parameters in its handling. When connecting
through a Unix-socket domain, the parameters have no effect.
Author: Ryohei Nagaura
Reviewed-by: Fabien Coelho, Robert Haas, Kyotaro Horiguchi, Kirk
Jamison, Mikalai Keida, Takayuki Tsunakawa, Andrei Yahorau
Discussion: https://postgr.es/m/EDA4195584F5064680D8130B1CA91C45367328@G01JPEXMBYT04
This allows the user to create duplicates of existing replication slots,
either logical or physical, and even changing properties such as whether
they are temporary or the output plugin used.
There are multiple uses for this, such as initializing multiple replicas
using the slot for one base backup; when doing investigation of logical
replication issues; and to select a different output plugins.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Andres Freund, Petr Jelinek
Discussion: https://postgr.es/m/CAD21AoAm7XX8y_tOPP6j4Nzzch12FvA1wPqiO690RCk+uYVstg@mail.gmail.com
Tom Lane
Fujii Masao
David Rowley
Heikki Linnakangas
Amit Kapila
Michael Paquier
Robert Haas
Peter Geoghegan
Peter Eisentraut
Andres Freund
Noah Misch
Alexander Korotkov
Thomas Munro
Jeff Davis
Joe Conway
Tomas Vondra
Alvaro Herrera
Andrew Dunstan
Bruce Momjian
Etsuro Fujita
Andrew Gierth
Magnus Hagander