> I see in your recent bytea-LIKE patch
>
> if (datatype != BYTEAOID && pg_database_encoding_max_length()
> 1)
> len = pg_mbcliplen((const unsigned char *) workstr, len,
len - 1);
> else
> len -= -1;
>
> Surely there's one too many minus signs in that last?
Joe Conway
> moment, but they used to be used; I think the correct response is to
> put back the missing counter increments, not rip out the counters.
Ok, fair enough. It's worth noting that they've been broken for a
while -- for example, the HashJoin counter increments were broken when
you comitted r1.20 of executor/nodeHashJoin.c in May of '99.
I've attached a revised patch that doesn't remove the counters (but
doesn't increment them either: I'm not sure of all the places where
the counter should be incremented).
Neil Conway
composite types. Add a couple more lsyscache.c routines to support this,
and make use of them in some other places that were doing lookups the
hard way.
ruleutils display is not such a great idea. For arguments of functions
and operators I think we'd better keep the historical behavior of showing
such casts explicitly, to ensure that the function/operator is reparsed
the same way when the rule is reloaded. This also makes the output of
EXPLAIN less obscurantist about exactly what's happening.
to be flexible about assignment casts without introducing ambiguity in
operator/function resolution. Introduce a well-defined promotion hierarchy
for numeric datatypes (int2->int4->int8->numeric->float4->float8).
Change make_const to initially label numeric literals as int4, int8, or
numeric (never float8 anymore).
Explicitly mark Func and RelabelType nodes to indicate whether they came
from a function call, explicit cast, or implicit cast; use this to do
reverse-listing more accurately and without so many heuristics.
Explicit casts to char, varchar, bit, varbit will truncate or pad without
raising an error (the pre-7.2 behavior), while assigning to a column without
any explicit cast will still raise an error for wrong-length data like 7.3.
This more nearly follows the SQL spec than 7.2 behavior (we should be
reporting a 'completion condition' in the explicit-cast cases, but we have
no mechanism for that, so just do silent truncation).
Fix some problems with enforcement of typmod for array elements;
it didn't work at all in 'UPDATE ... SET array[n] = foo', for example.
Provide a generalized array_length_coerce() function to replace the
specialized per-array-type functions that used to be needed (and were
missing for NUMERIC as well as all the datetime types).
Add missing conversions int8<->float4, text<->numeric, oid<->int8.
initdb forced.
(notify/SI-overrun interrupt) while it is in process of doing proc_exit,
it is possible for Async_NotifyHandler() to try to start a transaction
when one is already running. This leads to Asserts() or worse. I think
it may only be possible to occur when frontend synchronization is lost
(ie, the elog(FATAL) in SocketBackend() fires), but that is a standard
occurrence after error during COPY. In any case, I have seen this
failure occur during regression tests, so it is definitely possible.
that are explicitly JOINed are not considered dependencies unless they
are actually used in the query: mere presence in the joinaliasvars
list of a JOIN RTE doesn't count as being used. The patch touches
a number of files because I needed to generalize the API of
query_tree_walker to support an additional flag bit, but the changes
are otherwise quite small.
never been the correct procedure for locking a relation, and the
recently-found ALTER TABLE bug with adding a constraint and a toast
table in the same command shows why it's a bad idea.
Eliminate the mysterious games that the Cygwin build plays with the linker
flag variables. DLLLIBS is gone, use SHLIB_LINK like everyone else.
Detect cygipc in configure, after the linker flags are set up, otherwise
configure might not work at all.
Make sure everything is covered by make clean.
Fix the build of the new conversion procedure modules.
Add new DLLIMPORT markers where required.
Finally, the compiler complains if we use an explicit
-I/usr/local/include, so don't do that. Curiously, -L/usr/local/lib is
still necessary.
'make install'; there are enough of 'em that this slowed down the make
noticeably. Ensure that 'all' is the default make target in all these
directories (defaulting to 'make install' is surprising and dangerous
IMHO). Fix a couple small typos.
creation to world, but disallow temp table creation in template1. Per
latest round of pghackers discussion.
I did not force initdb, but the permissions lockdown on template1 will
not take effect unless you do one (or manually REVOKE TEMP ON DATABASE template1 FROM public).
a series of localtime() calls to determine the local timezone offset
when mktime() fails. This eliminates regression failures on RHL 7.3,
and should continue to work until it occurs to the glibc boys to break
localtime() as well. By then I hope we'll have our own timezone code...
> src/backend/optimizer/path/indxpath.c; see the "special indexable
> operators" stuff near the bottom of that file. (It's a bit of a crock
> that this code is hardwired there, and not somehow accessed through a
> system catalog, but it's what we've got at the moment.)
The attached patch re-enables a bytea right hand argument (as compared
to a text right hand argument), and enables index usage, for bytea LIKE
Joe Conway
already fixed by You. However there were a few left and attached patch
should fix the rest of them.
I used StringInfo only in 2 places and both of them are inside debug
ifdefs. Only performance penalty will come from using strlen() like all
the other code does.
I also modified some of the already patched parts by changing
snprintf(buf, 2 * BUFSIZE, ... style lines to
snprintf(buf, sizeof(buf), ... where buf is an array.
Jukka Holappa
(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
pointed out by Barry Lind: UPDATE bigintcol = 10000000000 fails because
the constant is initially taken as float8. We really need a better way,
but it's not gonna happen for 7.3.
Also, remove int4reltime() function, which is redundant with the
existing binary-compatibility coercion path from int4 to reltime,
and probably has been unreachable code for a long while.
type for runtime constraint checks, instead of misusing the parse-time
Constraint node for the purpose. Fix some damage introduced into type
coercion logic; in particular ensure that a coerced expression tree will
read out the correct result type when inspected (patch had broken some
RelabelType cases). Enforce domain NOT NULL constraints against columns
that are omitted from an INSERT.
available (else there's no way to interpret the list links). Change
pg_locks view to show transaction ID locks separately from ordinary
relation locks. Avoid showing N duplicate rows when the same lock is
held multiple times (seems unlikely that users care about exact hold
count). Improve documentation.
to false provides more SQL-spec-compliant behavior than we had before.
I am not sure that setting it false is actually a good idea yet; there
is a lot of client-side code that will probably be broken by turning
autocommit off. But it's a start.
Loosely based on a patch by David Van Wie.
column additions, deletions, and renames that would let a child table
get out of sync with its parent. Patch by Alvaro Herrera, with some
kibitzing by Tom Lane.
> Upon invoking a polygon(integer, circle) function a
> src/backend/utils/adt/geo_ops.c:circle_poly() function will gets
> called, which suffers from a buffer overflow.
>
> 2) A src/backend/adt/utils/geo_ops.c:path_encode() fails to detect a
> buffer overrun condition. It is called in multiple places, the most
> interesting are path_out() and poly_out() functions.
> 5) A src/backend/utils/adt/geo_ops.c:path_add() also fails to detect
> a simple buffer overrun.
I've attached a patch which should fix these problems.
Neil Conway
connections by the superuser only.
This patch replaces the last patch I sent a couple of days ago.
It closes a connection that has not been authorised by a superuser if it would
leave less than the GUC variable ReservedBackends
(superuser_reserved_connections in postgres.conf) backend process slots free
in the SISeg. This differs to the first patch which only reserved the last
ReservedBackends slots in the procState array. This has made the free slot
test more expensive due to the use of a lock.
After thinking about a comment on the first patch I've also made it a fatal
error if the number of reserved slots is not less than the maximum number of
connections.
Nigel J. Andrews
to the table function, thus preventing memory leakage accumulation across
calls. This means that SRFs need to be careful to distinguish permanent
and local storage; adjust code and documentation accordingly. Patch by
Joe Conway, very minor tweaks by Tom Lane.
ERROR: Cannot display a value of type RECORD
rather than a random integer when someone tries to SELECT a tuple
value. Per pghackers discussion around 26-May-02.
when it finds an existing relation with the same name as the
to-be-created index.
Old error message:
nconway=# create table foo (a int);
CREATE TABLE
nconway=# create index foo on foo (a);
ERROR: index named "foo" already exists
I replaced 'index' with 'relation' in the error message.
Neil Conway
should be pretty safe in practice, but it's probably better to be safe
than sorry.
I was actually looking for cases where NAMEDATALEN is assumed to be
32, but only found one. That's fixed too, as well as a few bits of
code cleanup.
Neil Conway
CVS HEAD):
Amended "strings" regression test. TOAST tests now insert two values
with storage set to "external", to exercise properly the TOAST slice
routines which fetch only a subset of the chunks.
Changed now-misleading comment on AlterTableCreateToastTable in
tablecmds.c, because both columns of the index on a toast table are now
used.
John Gray
anonymous return type SRF code. It gets rid of the superflous
'pg_locks_result' that Bruce/Tom had commented on. Otherwise, no
changes in functionality.
Neil Conway
copying into a fixed-size buffer (in this case, a buffer of
NAMEDATALEN bytes). AFAICT nothing to worry about here, but worth
fixing anyway...
Neil Conway
bit on the indexes.
I also attach clusterdb and clusterdb.sgml; both of them are blatant
rips of vacuumdb and vacuumdb.sgml, but get the job done. Please review
them, as I'm probably making a lot of mistakes with SGML and I can't
compile it here.
vacuumdb itself is not very comfortable to use when the databases have
passwords, because it has to connect once for each table (I can probably
make it connect only once for each database; should I?). Because of
this I added a mention of PGPASSWORDFILE in the documentation, but I
don't know if that is the correct place for that.
Alvaro Herrera
that ANALYZE would not gather any stats for a CHAR(255) column. I still
think a width threshold is appropriate for the reasons mentioned in the
code, but we can loosen it at least.
array header, and to compute sizing and alignment of array elements
the same way normal tuple access operations do --- viz, using the
tupmacs.h macros att_addlength and att_align. This makes the world
safe for arrays of cstrings or intervals, and should make it much
easier to write array-type-polymorphic functions; as examples see
the cleanups of array_out and contrib/array_iterator. By Joe Conway
and Tom Lane.
width types and varlena types, since with the introduction of CSTRING as
a more-or-less-real type, these concepts aren't identical. I've tried to
use varlena consistently to denote datatypes with typlen = -1, ie, they
have a length word and are potentially TOASTable; while the term variable
width covers both varlena and cstring (and, perhaps, someday other types
with other rules for computing the actual width). No code changes in this
commit except for renaming a couple macros.
value '-2' is used to indicate a variable-width type whose width is
computed as strlen(datum)+1. Everything that looks at typlen is updated
except for array support, which Joe Conway is working on; at the moment
it wouldn't work to try to create an array of cstring.
tighten foreign-key check (a self-reference should not prevent TRUNCATE),
improve error message, cause a relation's TOAST table to be truncated
along with the relation.
for repeat(). Again, somewhat off-the-cuff, so I might have missed
something...
test=# select lpad('xxxxx',1431655765,'yyyyyyyyyyyyyyyy');
ERROR: Requested length too large
test=# select rpad('xxxxx',1431655765,'yyyyyyyyyyyyyyyy');
ERROR: Requested length too large
(That's on a Unicode DB, haven't tested other encodings but AFAICT
this fix should still work.)
Neil Conway
> Neil Conway <neilc@samurai.com> writes:
> > + /* Check for integer overflow */
> > + if (tlen / slen != count)
> > + elog(ERROR, "Requested buffer is too large.");
>
> What about slen == 0?
Good point -- that wouldn't cause incorrect results or a security
problem, but it would reject input that we should really accept.
Revised patch is attached.
Neil Conway
constraints
The issue with finding and removing foreign key constraints is no longer
an issue, so please apply the attached.
It does NOT check for rules or on delete triggers (old style foreign
keys) as those are difficult to deal with (remove, truncate, re-add).
Rod Taylor
bytealike to TEXT.
This leaves like_escape_bytea() without anything to do, but I left it in
place in anticipation of the eventual bytea pattern selectivity
functions. If there is agreement that this would be the best long term
solution, I'll take it as a TODO for 7.4.
Joe Conway
replace(string, from, to)
-- replaces all occurrences of "from" in "string" to "to"
split(string, fldsep, column)
-- splits "string" on "fldsep" and returns "column" number piece
to_hex(int32_num) & to_hex(int64_num)
-- takes integer number and returns as hex string
Joe Conway
with OPAQUE, as per recent pghackers discussion. I still want to do some
more work on the 'cstring' pseudo-type, but I'm going to commit the bulk
of the changes now before the tree starts shifting under me ...
> Quick system function to pull out the current database.
>
> I've used this a number of times to allow stored procedures to find out
> where they are. Especially useful for those that do logging or hit a
> remote server.
>
> It's called current_database() to match with current_user().
It's also a necessity for an informational schema. The catalog
(database) name is required in a number of places.
Rod Taylor
latent wrong-struct-type bugs and makes the coding style more uniform,
since the majority of places working with lists of column names were
already using Strings not Idents. While at it, remove vestigial
support for Stream node type, and otherwise-unreferenced nodes.h entries
for T_TupleCount and T_BaseNode.
NB: full recompile is recommended due to changes of Node type numbers.
This shouldn't force an initdb though.
when two equal() targetlist items were to be added to an ORDER BY or
DISTINCT list. Although indeed this would make sorting fractionally
faster by sometimes saving a comparison, it confuses the heck out of
later stages of processing, because it makes it look like the user
wrote DISTINCT ON rather than DISTINCT. Bug reported by joe@piscitella.com.
The -n and -N options were removed. Quoting is now smart enough to
supply quotes if and only if necessary.
Numerical types are now printed without quotes, except in cases of
special values such as NaN.
Boolean values printed as true and false.
Most string literals now do not escape whitespace characters (newlines,
etc.) for portability.
SET SESSION AUTHORIZATION argument is a string literal, to follow SQL.
Made commands output by pg_dump use consistent spacing and indentation.
offending token more efficiently (per your suggestion of using
scanbuf). The new patch does the same as before:
template1=# select * frum pg_class;
ERROR: parser: parse error at or near "frum" at character 10
It also implement's Tom's suggestion:
template1=# select * from pg_class where\g
ERROR: parse: parse error at end of input
Gavin Sherry
This patch is an updated version of the lock listing patch. I've made
the following changes:
- write documentation
- wrap the SRF in a view called 'pg_locks': all user-level
access should be done through this view
- re-diff against latest CVS
One thing I chose not to do is adapt the SRF to use the anonymous
composite type code from Joe Conway. I'll probably do that eventually,
but I'm not really convinced it's a significantly cleaner way to
bootstrap SRF builtins than the method this patch uses (of course, it
has other uses...)
Neil Conway
sets of triggers. Also modify psql \d command to show foreign key
constraints as such and hide the triggers. pg_get_constraintdef()
function added to backend to support these. From Rod Taylor, code
review and some editorialization by Tom Lane.
> There's no longer a separate call to heap_storage_create in that routine
> --- the right place to make the test is now in the storage_create
> boolean parameter being passed to heap_create. A simple change, but
> it passeth patch's understanding ...
Thanks.
Attached is a patch against cvs tip as of 8:30 PM PST or so. Turned out
that even after fixing the failed hunks, there was a new spot in
bufmgr.c which needed to be fixed (related to temp relations;
RelationUpdateNumberOfBlocks). But thankfully the regression test code
caught it :-)
Joe Conway
CREATE DOMAIN newint as int4;
CREATE TABLE tab (col newint unique);
ERROR: data type newint has no default operator class for access method
"btree"
You must specify an operator class for the index or define a
default operator class for the data type
Specifically, GetDefaultOpClass() finds 0 exact matches and 3 binary
compatible matches. Fetching getBaseType() of the attribute fixes the
problem for domains (see attachment).
Rod Taylor
composite type capability makes it possible to create a system view
based on a table function in a way that is hopefully palatable to
everyone. The attached patch takes advantage of this, moving
show_all_settings() from contrib/tablefunc into the backend (renamed
all_settings(). It is defined as a builtin returning type RECORD. During
initdb a system view is created to expose the same information presently
available through SHOW ALL. For example:
test=# select * from pg_settings where name like '%debug%';
name | setting
-----------------------+---------
debug_assertions | on
debug_pretty_print | off
debug_print_parse | off
debug_print_plan | off
debug_print_query | off
debug_print_rewritten | off
wal_debug | 0
(7 rows)
Additionally during initdb two rules are created which make it possible
to change settings by updating the system view -- a "virtual table" as
Tom put it. Here's an example:
Joe Conway
(they are not part of a chain). When failing to find a parent tuple in
an update chain, emit a warning and abandon repair_frag, but do not give
an error as before. This should eliminate the infamous 'No one parent tuple
was found' failure, which we now realize is not a can't-happen condition
but a perfectly valid database state. Per recent pghackers discussion.
heap_mark4update; this avoids situations where a deleted tuple might
look like it is chained to something else. Also, cause all the WAL
redo routines to set t_ctid to equal t_self, rather than leaving it
undefined as before. Make heap_xlog_clean set the page's LSN and SUI
correctly. All per past discussions in pghackers, ranging back to
last December.
to make a reasonable attempt at accounting for palloc overhead, not just
the requested size of each memory chunk. Since in many scenarios this
will make for a significant reduction in the amount of space acquired,
partially compensate by doubling the default value of SORT_MEM to 1Mb.
Per discussion in pgsql-general around 9-Jun-2002..
it takes could be held for quite awhile after the analyze step completes.
Rethink locking of pg_statistic in light of this fact. The original
scheme took an exclusive lock on pg_statistic, which was okay when the
lock could be expected to be released shortly, but that doesn't hold
anymore. Back off to a normal writer's lock (RowExclusiveLock). This
allows concurrent ANALYZE of nonoverlapping sets of tables, at the price
that concurrent ANALYZEs of the same table may fail with 'tuple
concurrently updated'.
> Looks like Alvaro got sideswiped by the system catalog indexing changes
> I made over the weekend. It's a simple change, just reduce the whole
> mess to a "CatalogUpdateIndexes()" call.
I update two tuples, so I manually CatalogOpenIndexes() and
CatalogIndexInsert() two times, as per comments in
CatalogUpdateIndexes().
I also removed a couple of useless CommandCounterIncrement(), some
useless definitions in src/include/commands/cluster.h and useless
includes in src/backend/commands/cluster.c. This version passes the
regression test I had made for previous versions.
Alvaro Herrera
> l.mode, l.isgranted from pg_lock_info() as l(relation oid, database oid,
> backendpid int4, mode text, isgranted bool);
> ERROR: badly formatted planstring "COLUMNDEF "...
>
Reported by Neil Conway -- I never implemented readfuncs.c support for
ColumnDef or TypeName, which is needed so that views can be created on
functions returning type RECORD. Here's a patch.
Joe Conway
relfilenode.
I sent the CLUSTER patch a few days ago and I think it was missed. I
append it again, this time including the regression test files. For the
committer, please note that you have to cvs add the files as they don't
exist. Maybe add to the parallel and serial schedules also, but I don't
know such stuff.
Alvaro Herrera (<alvherre[a]atentus.com>)
error handling, and simplifies the code that remains. Apparently,
the code that left Berkeley had a whole "error handling subsystem",
which exceptions and whatnot. Since we don't use that anymore,
there's no reason to keep it around.
The regression tests pass with the patch applied. Unless anyone
sees a problem, please apply.
Neil Conway
has_language_privilege, has_schema_privilege to let SQL queries test
all the new privilege types in 7.3. Also, add functions pg_table_is_visible,
pg_type_is_visible, pg_function_is_visible, pg_operator_is_visible,
pg_opclass_is_visible to test whether objects contained in schemas are
visible in the current search path. Do some minor cleanup to centralize
accesses to pg_database, as well.
to behave according to SQL92 (or according to my current understanding
of same, anyway). Per pghackers discussion way back in March 2002:
thread 'Do FROM items of different schemas conflict?'
offset past the last-used-item-plus-one, since that would result in
leaving uninitialized holes in the item pointer array. AFAICT the only
place that was depending on this was btree index build, which was being
cavalier about when to fill in the P_HIKEY pointer; easily fixed.
Also a small performance improvement: shuffle itemid's by means of
memmove, not a one-at-a-time loop.
>> alias in this case. What do you think?
>
> I guess that would make sense. I'll make a separate patch just for
that
> change if that's OK.
>
Simple change -- patch attached.
test=# select * from myfoo1() as z;
z
----
1
2
3
(3 rows)
Joe Conway
don't return type RECORD. It also catches a core dump condition when a
function returning RECORD had an alias list instead of a coldeflist.
Now both conditions throw an ERROR.
Joe Conway
executed in an implicitely aborted transaction (e.g. after an occur
occurs), we return an error (and not just a warning). For example:
nconway=# begin;
BEGIN
nconway=# insert; -- syntax error
ERROR: parser: parse error at or near ";"
nconway=# select * from a;
ERROR: current transaction is aborted, queries ignored until end of
transaction block
The old behavior was:
nconway=# begin;
BEGIN
nconway=# insert;
ERROR: parser: parse error at or near ";"
nconway=# select * from a;
WARNING: current transaction is aborted, queries ignored until end
of transaction block
*ABORT STATE*
Which can be confusing: if the client isn't paying careful attention,
they will conclude that the query has executed (because no error is
returned).
Neil Conway
The local buffer manager is no longer used for newly-created relations
(unless they are TEMP); a new non-TEMP relation goes through the shared
bufmgr and thus will participate normally in checkpoints. But TEMP relations
use the local buffer manager throughout their lifespan. Also, operations
in TEMP relations are not logged in WAL, thus improving performance.
Since it's no longer necessary to fsync relations as they move out of the
local buffers into shared buffers, quite a lot of smgr.c/md.c/fd.c code
is no longer needed and has been removed: there's no concept of a dirty
relation anymore in md.c/fd.c, and we never fsync anything but WAL.
Still TODO: improve local buffer management algorithms so that it would
be reasonable to increase NLocBuffer.
hardwired lists of index names for each catalog, use the relcache's
mechanism for caching lists of OIDs of indexes of any table. This
reduces the common case of updating system catalog indexes to a single
line, makes it much easier to add a new system index (in fact, you
can now do so on-the-fly if you want to), and as a nice side benefit
improves performance a little. Per recent pghackers discussion.
of functions returning domain types, update documentation for typtype,
move get_typtype to lsyscache.c (actually, resurrect the old version),
add defense against creating pseudo-typed table columns, fix some
bogus list-parsing in grammar. Issues remain with respect to alias
handling and type checking; Joe is on those.
types for Table Functions, as previously proposed on HACKERS. Here is a
brief explanation:
1. Creates a new pg_type typtype: 'p' for pseudo type (currently either
'b' for base or 'c' for catalog, i.e. a class).
2. Creates new builtin type of typtype='p' named RECORD. This is the
first of potentially several pseudo types.
3. Modify FROM clause grammer to accept:
SELECT * FROM my_func() AS m(colname1 type1, colname2 type1, ...)
where m is the table alias, colname1, etc are the column names, and
type1, etc are the column types.
4. When typtype == 'p' and the function return type is RECORD, a list
of column defs is required, and when typtype != 'p', it is
disallowed.
5. A check was added to ensure that the tupdesc provide via the parser
and the actual return tupdesc match in number and type of
attributes.
When creating a function you can do:
CREATE FUNCTION foo(text) RETURNS setof RECORD ...
When using it you can do:
SELECT * from foo(sqlstmt) AS (f1 int, f2 text, f3 timestamp)
or
SELECT * from foo(sqlstmt) AS f(f1 int, f2 text, f3 timestamp)
or
SELECT * from foo(sqlstmt) f(f1 int, f2 text, f3 timestamp)
Included in the patches are adjustments to the regression test sql and
expected files, and documentation.
p.s.
This potentially solves (or at least improves) the issue of builtin
Table Functions. They can be bootstrapped as returning RECORD, and
we can wrap system views around them with properly specified column
defs. For example:
CREATE VIEW pg_settings AS
SELECT s.name, s.setting
FROM show_all_settings()AS s(name text, setting text);
Then we can also add the UPDATE RULE that I previously posted to
pg_settings, and have pg_settings act like a virtual table, allowing
settings to be queried and set.
Joe Conway
Can now do queries of the form: SELECT value IS OF (integer, float8);
Define macros for handling typmod manipulation for date/time types.
Should be more robust than all of that brute-force inline code.
Rename macros for masking and typmod manipulation to put TIMESTAMP_
or INTERVAL_ in front of the macro name, to reduce the possibility
of name space collisions.
Allow bit string constants without fully-specified length declaration.
Try implementing CREATE TABLE/OF as a mapping to inheritance.
May be appropriate, or may be replace later with something more exactly
like one might expect from databases without the feature.
strings. Should go back in and look at doing this a bit more elegantly
and (hopefully) cheaper. Probably not too bad anyway, but it seems a
shame to scan the strings twice: once for length for this buffer overrun
protection, and once to parse the line.
Remove use of pow() in date/time handling; was already gone from everything
*but* the time data types.
Define macros for handling typmod manipulation for date/time types.
Should be more robust than all of that brute-force inline code.
Rename macros for masking and typmod manipulation to put TIMESTAMP_
or INTERVAL_ in front of the macro name, to reduce the possibility
of name space collisions.
May not be the long-term solution (some continuing discussion with
Peter E.) but better than the current mapping of a conversion to integer
which I'd put in years ago before we had any bit string types at all.
This is already supported in the bit string implementation elsewhere.
ERROR: ExecInsert: rejected due to CHECK constraint insert_con
To be like this:
ERROR: ExecInsert: rejected due to CHECK constraint "insert_con" on
"insert_tbl"
Updated regression tests to match.
I got sick of seeing 'rejected due to CHECK constraint "$1" in my log and
not being able to find the bug in our website code...
Christopher Kings-Lynne
functionality of the command is basically identical to that of
BEGIN; it just accepts a few extra options (only one of which
PostgreSQL currently implements), and is standards-compliant.
The patch includes a simple regression test and documentation.
[ Regression tests removed, per Peter.]
Neil Conway
in the relcache. It's rather silly that we have reference count leak
checks in bufmgr and in catcache, but not in relcache which will normally
have many fewer entries. Chris K-L would have caught at least one bug
in his recent DROP patch if he'd had this.
relation being modified. In most paths of control we'd already have
such a lock, but if we were dropping the default due to a cascaded
delete of some function it depended on, maybe not.
code review by Tom Lane. Remaining issues: functions that take or
return tuple types are likely to break if one drops (or adds!)
a column in the table defining the type. Need to think about what
to do here.
Along the way: some code review for recent COPY changes; mark system
columns attnotnull = true where appropriate, per discussion a month ago.
attstattarget to indicate 'use the default'. The default is now a GUC
variable default_statistics_target, and so may be changed on the fly. Along
the way we gain the ability to have pg_dump dump the per-column statistics
target when it's not the default. Patch by Neil Conway, with some kibitzing
from Tom Lane.
'tioga recipes', whatever those are -- Peter E. killed most
of it a couple days ago, but this patch removes the rest. Most
of it was #ifdef'ed out anyway.
Neil Conway
The attached patch completes the following TODO item:
* Generate failure on short COPY lines rather than pad NULLs
I also restructed a lot of the existing COPY code, did some code
review on the column list patch sent in by Brent Verner a little
while ago, and added some regression tests. I also added an
explicit check (and resultant error) for extra data before
the end-of-line.
Neil Conway
deleted that had another row inserted/updated to its old
value during the same statement or other statements before the
integrity check for noaction would incorrectly error. This
could happen in deferred constraints or due to triggers or
functions. It's effectively a reworking of the previous patch that
did a not exists to instead do a separate check.
Stephan Szabo
changes mentioned above, and also adds a new function to the tablefunc
API. The tablefunc API change adds the following function:
* Oid foidGetTypeId(Oid foid) - Get a function's typeid given the
* function Oid. Use this together with TypeGetTupleDesc() to get a
* TupleDesc which is derived from the function's declared return type.
In the next post I'll send the contrib/tablefunc patch, which
illustrates the usage of this new function. Also attached is a doc patch
for this change. The doc patch also adds a function that I failed to
document previously.
Joe Conway
copied more places than I first thought it would. This fixes a bug:
a couple of these places were neglecting to enforce USAGE access on
explicitly-referenced schemas.
documentation (xindex.sgml should be rewritten), need to teach pg_dump
about it, need to update contrib modules that currently build pg_opclass
entries by hand. Original patch by Bill Studenmund, grammar adjustments
and general update for 7.3 by Tom Lane.
pg_language.lancompiler
pg_operator.oprprec
pg_operator.oprisleft
pg_proc.proimplicit
pg_proc.probyte_pct
pg_proc.properbyte_cpu
pg_proc.propercall_cpu
pg_proc.prooutin_ratio
pg_shadow.usetrace
pg_type.typprtlen
pg_type.typreceive
pg_type.typsend
Attempts to use the obsoleted attributes of pg_operator or pg_proc
in the CREATE commands will be greeted by a warning. For pg_type,
there is no warning (yet) because pg_dump scripts still contain these
attributes.
Also remove new but already obsolete spellings
isVolatile, isStable, isImmutable in WITH clause. (Use new syntax
instead.)
> submitted on July 9:
>
> http://archives.postgresql.org/pgsql-patches/2002-07/msg00056.php
>
> Please disregard that one *if* this one is applied. If this one is
> rejected please go ahead with the July 9th patch.
The July 9th Table Function API patch mentioned above is now in CVS, so
here is an updated version of the guc patch which should apply cleanly
against CVS tip.
Joe Conway
bitmap, if present).
Per Tom Lane's suggestion the information whether a tuple has an oid
or not is carried in the tuple descriptor. For debugging reasons
tdhasoid is of type char, not bool. There are predefined values for
WITHOID, WITHOUTOID and UNDEFOID.
This patch has been generated against a cvs snapshot from last week
and I don't expect it to apply cleanly to current sources. While I
post it here for public review, I'm working on a new version against a
current snapshot. (There's been heavy activity recently; hope to
catch up some day ...)
This is a long patch; if it is too hard to swallow, I can provide it
in smaller pieces:
Part 1: Accessor macros
Part 2: tdhasoid in TupDesc
Part 3: Regression test
Part 4: Parameter withoid to heap_addheader
Part 5: Eliminate t_oid from HeapTupleHeader
Part 2 is the most hairy part because of changes in the executor and
even in the parser; the other parts are straightforward.
Up to part 4 the patched postmaster stays binary compatible to
databases created with an unpatched version. Part 5 is small (100
lines) and finally breaks compatibility.
Manfred Koizar
PX recombination operator, changes some elog() messages from LOG
to DEBUG1, puts some debugging functions inside the appropriate
#ifdef (not enabled by default), and makes a few other minor
cleanups.
BTW, the elog() change is motivated by at least one user who
has sent a concerned email to -general asking exactly what the
"ERX recombination operator" is, and what it is doing to their
DBMS.
Neil Conway
tuple header. The fix is based on the thought that HEAP_MOVED_IN is
not needed any more as soon as HEAP_XMIN_COMMITTED has been set. So
in tqual.c and vacuum.c the HEAP_MOVED bits are cleared when
HEAP_XMIN_COMMITTED is set.
Vacuum robustness is enhanced by rearranging ifs, so that we have a
chance to elog(ERROR, ...) before an assertion fails.
A new regression test is included.
Manfred Koizar
extension to create binary compatible casts. Includes dependency tracking
as well.
pg_proc.proimplicit is now defunct, but will be removed in a separate
commit.
pg_dump provides a migration path from the previous scheme to declare
casts. Dumping binary compatible casts is currently impossible, though.
COPY x (a,d,c,b) from stdin;
COPY x (a,c) to stdout;
as well as the corresponding changes to pg_dump to use the new
functionality. This functionality is not available when using
the BINARY option. If a column is not specified in the COPY FROM
statement, its default values will be used.
In addition to this functionality, I tweaked a couple of the
error messages emitted by the new COPY <options> checks.
Brent Verner
Implements between (symmetric / asymmetric) as a node.
Executes the left or right expression once, makes a Const out of the
resulting Datum and executes the >=, <= portions out of the Const sets.
Of course, the parser does a fair amount of preparatory work for this to
happen.
Rod Taylor
Conway (BuildTupleFromCStrings sets NULL for pass-by-value types when
intended value is 0). It also implements some other improvements
suggested by Neil.
Joe Conway
conversion procs and conversions are added in initdb. Currently
supported conversions are:
UTF-8(UNICODE) <--> SQL_ASCII, ISO-8859-1 to 16, EUC_JP, EUC_KR,
EUC_CN, EUC_TW, SJIS, BIG5, GBK, GB18030, UHC,
JOHAB, TCVN
EUC_JP <--> SJIS
EUC_TW <--> BIG5
MULE_INTERNAL <--> EUC_JP, SJIS, EUC_TW, BIG5
Note that initial contents of pg_conversion system catalog are created
in the initdb process. So doing initdb required is ideal, it's
possible to add them to your databases by hand, however. To accomplish
this:
psql -f your_postgresql_install_path/share/conversion_create.sql your_database
So I did not bump up the version in cataversion.h.
TODO:
Add more conversion procs
Add [CASCADE|RESTRICT] to DROP CONVERSION
Add tuples to pg_depend
Add regression tests
Write docs
Add SQL99 CONVERT command?
--
Tatsuo Ishii
Bruce Momjian
Tom Lane
Tatsuo Ishii
Peter Eisentraut
Hiroshi Inoue
Thomas G. Lockhart