Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The xlog-specific headers need to be included in both frontend code -
specifically, pg_waldump - and the backend, but the remainder of the
private headers for each index are only needed by the backend. By
splitting the xlog stuff out into separate headers, pg_waldump pulls
in fewer backend headers, which is a good thing.
Patch by me, reviewed by Michael Paquier and Andres Freund, per a
complaint from Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoZ=F=GkxV0YEv-A8tb+AEGy_Qa7GSiJ8deBKFATnzfEug@mail.gmail.com
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
While prior to this patch the user-visible effect on the database
of any set of successfully committed serializable transactions was
always consistent with some one-at-a-time order of execution of
those transactions, the presence of declarative constraints could
allow errors to occur which were not possible in any such ordering,
and developers had no good workarounds to prevent user-facing
errors where they were not necessary or desired. This patch adds
a check for serialization failure ahead of duplicate key checking
so that if a developer explicitly (redundantly) checks for the
pre-existing value they will get the desired serialization failure
where the problem is caused by a concurrent serializable
transaction; otherwise they will get a duplicate key error.
While it would be better if the reads performed by the constraints
could count as part of the work of the transaction for
serialization failure checking, and we will hopefully get there
some day, this patch allows a clean and reliable way for developers
to work around the issue. In many cases existing code will already
be doing the right thing for this to "just work".
Author: Thomas Munro, with minor editing of docs by me
Reviewed-by: Marko Tiikkaja, Kevin Grittner
The newly added ON CONFLICT clause allows to specify an alternative to
raising a unique or exclusion constraint violation error when inserting.
ON CONFLICT refers to constraints that can either be specified using a
inference clause (by specifying the columns of a unique constraint) or
by naming a unique or exclusion constraint. DO NOTHING avoids the
constraint violation, without touching the pre-existing row. DO UPDATE
SET ... [WHERE ...] updates the pre-existing tuple, and has access to
both the tuple proposed for insertion and the existing tuple; the
optional WHERE clause can be used to prevent an update from being
executed. The UPDATE SET and WHERE clauses have access to the tuple
proposed for insertion using the "magic" EXCLUDED alias, and to the
pre-existing tuple using the table name or its alias.
This feature is often referred to as upsert.
This is implemented using a new infrastructure called "speculative
insertion". It is an optimistic variant of regular insertion that first
does a pre-check for existing tuples and then attempts an insert. If a
violating tuple was inserted concurrently, the speculatively inserted
tuple is deleted and a new attempt is made. If the pre-check finds a
matching tuple the alternative DO NOTHING or DO UPDATE action is taken.
If the insertion succeeds without detecting a conflict, the tuple is
deemed inserted.
To handle the possible ambiguity between the excluded alias and a table
named excluded, and for convenience with long relation names, INSERT
INTO now can alias its target table.
Bumps catversion as stored rules change.
Author: Peter Geoghegan, with significant contributions from Heikki
Linnakangas and Andres Freund. Testing infrastructure by Jeff Janes.
Reviewed-By: Heikki Linnakangas, Andres Freund, Robert Haas, Simon Riggs,
Dean Rasheed, Stephen Frost and many others.
Even though the main benefit of the Lehman and Yao algorithm for
btrees is that no locks need be held between page reads in an
index search, we were holding a buffer pin on each leaf page after
it was read until we were ready to read the next one. The reason
was so that we could treat this as a weak lock to create an
"interlock" with vacuum's deletion of heap line pointers, even
though our README file pointed out that this was not necessary for
a scan using an MVCC snapshot.
The main goal of this patch is to reduce the blocking of vacuum
processes by in-progress btree index scans (including a cursor
which is idle), but the code rearrangement also allows for one
less buffer content lock to be taken when a forward scan steps from
one page to the next, which results in a small but consistent
performance improvement in many workloads.
This patch leaves behavior unchanged for some cases, which can be
addressed separately so that each case can be evaluated on its own
merits. These unchanged cases are when a scan uses a non-MVCC
snapshot, an index-only scan, and a scan of a btree index for which
modifications are not WAL-logged. If later patches allow all of
these cases to drop the buffer pin after reading a leaf page, then
the btree vacuum process can be simplified; it will no longer need
the "super-exclusive" lock to delete tuples from a page.
Reviewed by Heikki Linnakangas and Kyotaro Horiguchi
While building error messages to return to the user,
BuildIndexValueDescription, ExecBuildSlotValueDescription and
ri_ReportViolation would happily include the entire key or entire row in
the result returned to the user, even if the user didn't have access to
view all of the columns being included.
Instead, include only those columns which the user is providing or which
the user has select rights on. If the user does not have any rights
to view the table or any of the columns involved then no detail is
provided and a NULL value is returned from BuildIndexValueDescription
and ExecBuildSlotValueDescription. Note that, for key cases, the user
must have access to all of the columns for the key to be shown; a
partial key will not be returned.
Further, in master only, do not return any data for cases where row
security is enabled on the relation and row security should be applied
for the user. This required a bit of refactoring and moving of things
around related to RLS- note the addition of utils/misc/rls.c.
Back-patch all the way, as column-level privileges are now in all
supported versions.
This has been assigned CVE-2014-8161, but since the issue and the patch
have already been publicized on pgsql-hackers, there's no point in trying
to hide this commit.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
I got the backup block numbers off-by-one in the commit that changed the
way incomplete-splits are handled. I blame the comments, which said
"backup block 1" and "backup block 2", even though the backup blocks
are numbered starting from 0, in the macros and functions used in replay.
Fix the comments and the code.
Per Jeff Janes' bug report about corruption caused by torn page writes.
The incorrect code is new in git master, but backpatch the comment change
down to 9.0, where the numbering in the redo-side macros was changed.
Forgot to update LSN of left sibling's page, when creating a new root.
I fixed this for regular insertions and page splits earlier, but missed
new root creation.
Inserting a downlink to an internal page clears the incomplete-split flag
of the child's left sibling, so the left sibling's LSN also needs to be
updated.
With this in place, a session blocking behind another one because of
tuple locks will get a context line mentioning the relation name, tuple
TID, and operation being done on tuple. For example:
LOG: process 11367 still waiting for ShareLock on transaction 717 after 1000.108 ms
DETAIL: Process holding the lock: 11366. Wait queue: 11367.
CONTEXT: while updating tuple (0,2) in relation "foo"
STATEMENT: UPDATE foo SET value = 3;
Most usefully, the new line is displayed by log entries due to
log_lock_waits, although of course it will be printed by any other log
message as well.
Author: Christian Kruse, some tweaks by Álvaro Herrera
Reviewed-by: Amit Kapila, Andres Freund, Tom Lane, Robert Haas
Splitting a page consists of two separate steps: splitting the child page,
and inserting the downlink for the new right page to the parent. Previously,
we handled the case that you crash in between those steps with a cleanup
routine after the WAL recovery had finished, which finished the incomplete
split. However, that doesn't help if the page split is interrupted but the
database doesn't crash, so that you don't perform WAL recovery. That could
happen for example if you run out of disk space.
Remove the end-of-recovery cleanup step. Instead, when a page is split, the
left page is marked with a new INCOMPLETE_SPLIT flag, and when the downlink
is inserted to the parent, the flag is cleared again. If an insertion sees
a page with the flag set, it knows that the split was interrupted for some
reason, and inserts the missing downlink before proceeding.
I used the same approach to fix GIN and GiST split algorithms earlier. This
was the last WAL cleanup routine, so we could get rid of that whole
machinery now, but I'll leave that for a separate patch.
Reviewed by Peter Geoghegan.
These flushes were added in my commit d2896a9ed, which added the btree
logic that keeps a cached copy of the index metapage data in index relcache
entries. The idea was to ensure that other backends would promptly update
their cached copies after a change. However, this is not really necessary,
since _bt_getroot() has adequate defenses against believing a stale root
page link, and _bt_getrootheight() doesn't have to be 100% right.
Moreover, if it were necessary, a relcache flush would be an unreliable way
to do it, since the sinval mechanism believes that relcache flush requests
represent transactional updates, and therefore discards them on transaction
rollback. Therefore, we might as well drop these flush requests and save
the time to rebuild the whole relcache entry after a metapage change.
If we ever try to support in-place truncation of btree indexes, it might
be necessary to revisit this issue so that _bt_getroot() can't get caught
by trying to follow a metapage link to a page that no longer exists.
A possible solution to that is to make use of an smgr, rather than
relcache, inval request to force other backends to discard their cached
metapages. But for the moment this is not worth pursuing.
Since C99, it's been standard for printf and friends to accept a "z" size
modifier, meaning "whatever size size_t has". Up to now we've generally
dealt with printing size_t values by explicitly casting them to unsigned
long and using the "l" modifier; but this is really the wrong thing on
platforms where pointers are wider than longs (such as Win64). So let's
start using "z" instead. To ensure we can do that on all platforms, teach
src/port/snprintf.c to understand "z", and add a configure test to force
use of that implementation when the platform's version doesn't handle "z".
Having done that, modify a bunch of places that were using the
unsigned-long hack to use "z" instead. This patch doesn't pretend to have
gotten everyplace that could benefit, but it catches many of them. I made
an effort in particular to ensure that all uses of the same error message
text were updated together, so as not to increase the number of
translatable strings.
It's possible that this change will result in format-string warnings from
pre-C99 compilers. We might have to reconsider if there are any popular
compilers that will warn about this; but let's start by seeing what the
buildfarm thinks.
Andres Freund, with a little additional work by me
MarkBufferDirtyHint() writes WAL, and should know if it's got a
standard buffer or not. Currently, the only callers where buffer_std
is false are related to the FSM.
In passing, rename XLOG_HINT to XLOG_FPI, which is more descriptive.
Back-patch to 9.3.
Checksums are set immediately prior to flush out of shared buffers
and checked when pages are read in again. Hint bit setting will
require full page write when block is dirtied, which causes various
infrastructure changes. Extensive comments, docs and README.
WARNING message thrown if checksum fails on non-all zeroes page;
ERROR thrown but can be disabled with ignore_checksum_failure = on.
Feature enabled by an initdb option, since transition from option off
to option on is long and complex and has not yet been implemented.
Default is not to use checksums.
Checksum used is WAL CRC-32 truncated to 16-bits.
Simon Riggs, Jeff Davis, Greg Smith
Wide input and assistance from many community members. Thank you.
Remove use of PageSetTLI() from all page manipulation functions
and adjust README to indicate change in the way we make changes
to pages. Repurpose those bytes into the pd_checksum field and
explain how that works in comments about page header.
Refactoring ahead of actual feature patch which would make use
of the checksum field, arriving later.
Jeff Davis, with comments and doc changes by Simon Riggs
Direction suggested by Robert Haas; many others providing
review comments.
This patch addresses the problem that applications currently have to
extract object names from possibly-localized textual error messages,
if they want to know for example which index caused a UNIQUE_VIOLATION
failure. It adds new error message fields to the wire protocol, which
can carry the name of a table, table column, data type, or constraint
associated with the error. (Since the protocol spec has always instructed
clients to ignore unrecognized field types, this should not create any
compatibility problem.)
Support for providing these new fields has been added to just a limited set
of error reports (mainly, those in the "integrity constraint violation"
SQLSTATE class), but we will doubtless add them to more calls in future.
Pavel Stehule, reviewed and extensively revised by Peter Geoghegan, with
additional hacking by Tom Lane.
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
This patch changes _bt_split() and _bt_pagedel() to throw a plain ERROR,
rather than PANIC, for several cases that are reported from the field
from time to time:
* right sibling's left-link doesn't match;
* PageAddItem failure during _bt_split();
* parent page's next child isn't right sibling during _bt_pagedel().
In addition the error messages for these cases have been made a bit
more verbose, with additional values included.
The original motivation for PANIC here was to capture core dumps for
subsequent analysis. But with so many users whose platforms don't capture
core dumps by default, or who are unprepared to analyze them anyway, it's hard
to justify a forced database restart when we can fairly easily detect the
problems before we've reached the critical sections where PANIC would be
necessary. It is not currently known whether the reports of these messages
indicate well-hidden bugs in Postgres, or are a result of storage-level
malfeasance; the latter possibility suggests that we ought to try to be more
robust even if there is a bug here that's ultimately found.
Backpatch to 8.2. The code before that is sufficiently different that
it doesn't seem worth the trouble to back-port further.
WAL record for btree delete contains a list of tids, even when backup
blocks are present. We follow the tids to their heap tuples, taking
care to follow LP_REDIRECT tuples. We ignore LP_DEAD tuples on the
understanding that they will always have xmin/xmax earlier than any
LP_NORMAL tuples referred to by killed index tuples. Iff all tuples
are LP_DEAD we return InvalidTransactionId. The heap relfilenode is
added to the WAL record, requiring API changes to pass down the heap
Relation. XLOG_PAGE_MAGIC updated.
Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.