Add a lazy_scan_heap() subsidiary function that handles heap pruning and
tuple freezing: lazy_scan_prune(). This is a great deal cleaner. The
code that remains in lazy_scan_heap()'s per-block loop can now be
thought of as code that either comes before or after the call to
lazy_scan_prune(), which is now the clear focal point. This division is
enforced by the way in which we now manage state. lazy_scan_prune()
outputs state (using its own struct) that describes what to do with the
page following pruning and freezing (e.g., visibility map maintenance,
recording free space in the FSM). It doesn't get passed any special
instructional state from the preamble code, though.
Also cleanly separate the logic used by a VACUUM with INDEX_CLEANUP=off
from the logic used by single-heap-pass VACUUMs. The former case is now
structured as the omission of index and heap vacuuming by a two pass
VACUUM. The latter case goes back to being used only when the table
happens to have no indexes (just as it was before commit a96c41fe).
This structure is much more natural, since the whole point of
INDEX_CLEANUP=off is to skip the index and heap vacuuming that would
otherwise take place. The single-heap-pass case doesn't skip any useful
work, though -- it just does heap pruning and heap vacuuming together
when the table happens to have no indexes.
Both of these changes are preparation for an upcoming patch that
generalizes the mechanism used by INDEX_CLEANUP=off. The later patch
will allow VACUUM to give up on index and heap vacuuming dynamically, as
problems emerge (e.g., with wraparound), so that an affected VACUUM
operation can finish up as soon as possible.
Also fix a very old bug in single-pass VACUUM VERBOSE output. We were
reporting the number of tuples deleted via pruning as a direct
substitute for reporting the number of LP_DEAD items removed in a
function that deals with the second pass over the heap. But that
doesn't work at all -- they're two different things.
To fix, start tracking the total number of LP_DEAD items encountered
during pruning, and use that in the report instead. A single pass
VACUUM will always vacuum away whatever LP_DEAD items a heap page has
immediately after it is pruned, so the total number of LP_DEAD items
encountered during pruning equals the total number vacuumed-away.
(They are _not_ equal in the INDEX_CLEANUP=off case, but that's okay
because skipping index vacuuming is now a totally orthogonal concept to
one-pass VACUUM.)
Also stop reporting the count of LP_UNUSED items in VACUUM VERBOSE
output. This makes the output of VACUUM VERBOSE more consistent with
log_autovacuum's output (because it never showed information about
LP_UNUSED items). VACUUM VERBOSE reported LP_UNUSED items left behind
by the last VACUUM, and LP_UNUSED items created via pruning HOT chains
during the current VACUUM (it never included LP_UNUSED items left behind
by the current VACUUM's second pass over the heap). This makes it
useless as an indicator of line pointer bloat, which must have been the
original intention. (Like the first VACUUM VERBOSE issue, this issue was
arguably an oversight in commit 282d2a03, which added the heap-only
tuple optimization.)
Finally, stop reporting empty_pages in VACUUM VERBOSE output, and start
reporting pages_removed instead. This also makes the output of VACUUM
VERBOSE more consistent with log_autovacuum's output (which does not
show empty_pages, but does show pages_removed). An empty page isn't
meaningfully different to a page that is almost empty, or a page that is
empty but for only a small number of remaining LP_UNUSED items.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com
Andrew Gierth reported that it's possible to crash the backend if no
pg_attrdef record is found to match an attribute that has atthasdef set.
AttrDefaultFetch warns about this situation, but then leaves behind
a relation tupdesc that has null "adbin" pointer(s), which most places
don't guard against.
We considered promoting the warning to an error, but throwing errors
during relcache load is pretty drastic: it effectively locks one out
of using the relation at all. What seems better is to leave the
load-time behavior as a warning, but then throw an error in any code
path that wants to use a default and can't find it. This confines
the error to a subset of INSERT/UPDATE operations on the table, and
in particular will at least allow a pg_dump to succeed.
Also, we should fix AttrDefaultFetch to not leave any null pointers
in the tupdesc, because that just creates an untested bug hazard.
While at it, apply the same philosophy of "warn at load, throw error
only upon use of the known-missing info" to CHECK constraints.
CheckConstraintFetch is very nearly the same logic as AttrDefaultFetch,
but for reasons lost in the mists of time, it was throwing ERROR for
the same cases that AttrDefaultFetch treats as WARNING. Make the two
functions more nearly alike.
In passing, get rid of potentially-O(N^2) loops in equalTupleDesc
by making AttrDefaultFetch sort the entries after fetching them,
so that equalTupleDesc can assume that entries in two equal tupdescs
must be in matching order. (CheckConstraintFetch already was sorting
CHECK constraints, but equalTupleDesc hadn't been told about it.)
There's some argument for back-patching this, but with such a small
number of field reports, I'm content to fix it in HEAD.
Discussion: https://postgr.es/m/87pmzaq4gx.fsf@news-spur.riddles.org.uk
Previously if hot standby was enabled, archive recovery exited with
an error when it found WAL generated with wal_level=minimal.
But if hot standby was disabled, it just reported a warning and
continued in that case. Which could lead to data loss or errors
during normal operation. A warning was emitted, but users could
easily miss that and not notice this serious situation until
they encountered the actual errors.
To improve this situation, this commit changes archive recovery
so that it exits with FATAL error when it finds WAL generated with
wal_level=minimal whatever the setting of hot standby. This enables
users to notice the serious situation soon.
The FATAL error is thrown if archive recovery starts from a base
backup taken before wal_level is changed to minimal. When archive
recovery exits with the error, if users have a base backup taken
after setting wal_level to higher than minimal, they can recover
the database by starting archive recovery from that newer backup.
But note that if such backup doesn't exist, there is no easy way to
complete archive recovery, which may make the database server
unstartable and users may lose whole database. The commit adds
the note about this risk into the document.
Even in the case of unstartable database server, previously by just
disabling hot standby users could avoid the error during archive
recovery, forcibly start up the server and salvage data from it.
But note that this commit makes this procedure unavailable at all.
Author: Takamichi Osumi
Reviewed-by: Laurenz Albe, Kyotaro Horiguchi, David Steele, Fujii Masao
Discussion: https://postgr.es/m/OSBPR01MB4888CBE1DA08818FD2D90ED8EDF90@OSBPR01MB4888.jpnprd01.prod.outlook.com
Commit 49f49def took entirely the wrong approach to fixing this issue.
Just allocate a local buffer access strategy in each individual worker
instead of trying to propagate state. This state was never propagated
by parallel VACUUM in the first place.
It looks like the only reason that this worked following commit 40d964ec
was that it involved static global variables, which are initialized to 0
per the C standard.
A more comprehensive fix may be necessary, even on HEAD. This fix
should at least get the buildfarm green once again.
Thanks once again to Thomas Munro for continued off-list assistance with
the issue.
Not much to say here: does what it says on the tin.
We steal a previously-always-zero bit from the nextOffset
field of leaf index tuples in order to track whether there
is a nulls bitmap. Otherwise it works about like included
columns in other index types.
Pavel Borisov, reviewed by Andrey Borodin and Anastasia Lubennikova,
and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com
Parallel VACUUM relied on global variable state from the leader process
being propagated to workers on fork(). Commit b4af70cb removed most
uses of global variables inside vacuumlazy.c, but did not account for
the buffer access strategy state.
To fix, propagate the state through shared memory instead.
Per buildfarm failures on elver, curculio, and morepork.
Many thanks to Thomas Munro for off-list assistance with this issue.
Reorganize the state struct used by VACUUM -- group related items
together to make it easier to understand. Also stop relying on stack
variables inside lazy_scan_heap() -- move those into the state struct
instead. Doing things this way simplifies large groups of related
functions whose function signatures had a lot of unnecessary redundancy.
Switch over to using int64 for the struct fields used to count things
that are reported to the user via log_autovacuum and VACUUM VERBOSE
output. We were using double, but that doesn't seem to have any
advantages. Using int64 makes it possible to add assertions that verify
that the first pass over the heap (pruning) encounters precisely the
same number of LP_DEAD items that get deleted from indexes later on, in
the second pass over the heap. These assertions will be added in later
commits.
Finally, adjust the signatures of functions with IndexBulkDeleteResult
pointer arguments in cases where there was ambiguity about whether or
not the argument relates to a single index or all indexes. Functions
now use the idiom that both ambulkdelete() and amvacuumcleanup() have
always used (where appropriate): accept a mutable IndexBulkDeleteResult
pointer argument, and return a result IndexBulkDeleteResult pointer to
caller.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkeOSYwC6KNckbhk2b1aNnWum6Yyn0NKP9D-Hq1LGTDPw@mail.gmail.com
spg_box_quad_leaf_consistent unconditionally returned the leaf
datum as leafValue, even though in its usage for poly_ops that
value is of completely the wrong type.
In versions before 12, that was harmless because the core code did
nothing with leafValue in non-index-only scans ... but since commit
2a6368343, if we were doing a KNN-style scan, spgNewHeapItem would
unconditionally try to copy the value using the wrong datatype
parameters. Said copying is a waste of time and space if we're not
going to return the data, but it accidentally failed to fail until
I fixed the datatype confusion in ac9099fc1.
Hence, change spgNewHeapItem to not copy the datum unless we're
actually going to return it later. This saves cycles and dodges
the question of whether lossy opclasses are returning the right
type. Also change spg_box_quad_leaf_consistent to not return
data that might be of the wrong type, as insurance against
somebody introducing a similar bug into the core code in future.
It seems like a good idea to back-patch these two changes into
v12 and v13, although I'm afraid to change spgNewHeapItem's
mistaken idea of which datatype to use in those branches.
Per buildfarm results from ac9099fc1.
Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us
According to the documentation, the attType passed to the opclass
config function (and also relied on by the core code) is the type
of the heap column or expression being indexed. But what was
actually being passed was the type stored for the index column.
This made no difference for user-defined SP-GiST opclasses,
because we weren't allowing the STORAGE clause of CREATE OPCLASS
to be used, so the two types would be the same. But it's silly
not to allow that, seeing that the built-in poly_ops opclass
has a different value for opckeytype than opcintype, and that if you
want to do lossy storage then the types must really be different.
(Thus, user-defined opclasses doing lossy storage had to lie about
what type is in the index.) Hence, remove the restriction, and make
sure that we use the input column type not opckeytype where relevant.
For reasons of backwards compatibility with existing user-defined
opclasses, we can't quite insist that the specified leafType match
the STORAGE clause; instead just add an amvalidate() warning if
they don't match.
Also fix some bugs that would only manifest when trying to return
index entries when attType is different from attLeafType. It's not
too surprising that these have not been reported, because the only
usual reason for such a difference is to store the leaf value
lossily, rendering index-only scans impossible.
Add a src/test/modules module to exercise cases where attType is
different from attLeafType and yet index-only scan is supported.
Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us
When calling sort_expanded_ranges() we need to remember the return
value, because the function sorts and also deduplicates the ranges. So
the number of ranges may decrease. brin_minmax_multi_union failed to do
that, which resulted in crashes due to bogus ranges (equal minval/maxval
but not marked as compacted).
Reported-by: Jaime Casanova
Discussion: https://postgr.es/m/20210404052550.GA4376%40ahch-to
The BRIN minmax-multi consistent function incorrectly assumed it can
lookup an operator, and then swap the arguments to get the commutator.
For example <(a,b) would be called as <(b,a) to get >(a,b). This works
when the arguments are of the same type, but with cross-type opclasses
this fails. We can't swap <(float4,float8) arguments, for example.
Fixed by passing arguments in the right order.
Discussion: https://postgr.es/m/CAJKUy5jLZFLCxyxfT%3DMfK5mtPfSzHA1rVLowR-j4RRsFVvKm7A%40mail.gmail.com
The distance calculation ignored the mask, unlike the inet comparator,
which resulted in negative distance in some cases. Fixed by applying the
mask in brin_minmax_multi_distance_inet. I've considered simply calling
inetmi() to calculate the delta, but that does not consider mask either.
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/1a0a7b9d-9bda-e3a2-7fa4-88f15042a051%40enterprisedb.com
The distance calculation for interval type was treating months as having
31 days, which is inconsistent with the interval comparator (using 30
days). Due to this it was possible to get negative distance (b-a) when
(a<b), trigerring an assert.
Fixed by adopting the same logic as interval_cmp_value.
Reported-by: Jaime Casanova
Discussion: https://postgr.es/m/CAJKUy5jKH0Xhneau2mNftNPtTy-BVgQfXc8zQkEvRvBHfeUThQ%40mail.gmail.com
The existing convention in SP-GiST is that any pass-by-value datatype
is stored in Datum representation, i.e. it's of width sizeof(Datum)
even when typlen is less than that. This is okay, or at least it's
too late to change it, for prefix datums and node-label datums in inner
(upper) tuples. But it's problematic for leaf datums, because we'd
prefer those to be stored in Postgres' standard on-disk representation
so that we can easily extend leaf tuples to carry additional "included"
columns.
I believe, however, that we can get away with just up and changing that.
This would be an unacceptable on-disk-format break, but there are two
big mitigating factors:
1. It seems quite unlikely that there are any SP-GiST opclasses out
there that use pass-by-value leaf datatypes. Certainly none of the
ones in core do, nor has codesearch.debian.net heard of any. Given
what SP-GiST is good for, it's hard to conceive of a use-case where
the leaf-level values would be both small and fixed-width. (As an
example, if you wanted to index text values with the leaf level being
just a byte, then every text string would have to be represented
with one level of inner tuple per preceding byte, which would be
horrendously space-inefficient and slow to access. You always want
to use as few inner-tuple levels as possible, leaving as much as
possible in the leaf values.)
2. Even granting that you have such an index, this change only
breaks things on big-endian machines. On little-endian, the high
order bytes of the Datum format will now just appear to be alignment
padding space.
So, change the code to store pass-by-value leaf datums in their
usual on-disk form. Inner-tuple datums are not touched.
This is extracted from a larger patch that intends to add support for
"included" columns. I'm committing it separately for visibility in
our commit logs.
Pavel Borisov and Tom Lane, reviewed by Andrey Borodin
Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com
We always inserted a larger-than-fillfactor tuple into a newly-extended
page, even when existing pages were empty or contained nothing but an
unused line pointer. This was unnecessary relation extension. Start
tolerating page usage up to 1/8 the maximum space that could be taken up
by line pointers. This is somewhat arbitrary, but it should allow more
cases to reuse pages. This has no effect on tables with fillfactor=100
(the default).
John Naylor and Floris van Nee. Reviewed by Matthias van de Meent.
Reported by Floris van Nee.
Discussion: https://postgr.es/m/6e263217180649339720afe2176c50aa@opammb0562.comp.optiver.com
The design of the data structures which allow storage of the per-worker
memory during parallel seq scans were not ideal. The work done in
56788d215 required an additional data structure to allow workers to
remember the range of pages that had been allocated to them for
processing during a parallel seqscan. That commit added a void pointer
field to TableScanDescData to allow heapam to store the per-worker
allocation information. However putting the field there made very little
sense given that we have AM specific structs for that, e.g.
HeapScanDescData.
Here we remove the void pointer field from TableScanDescData and add a
dedicated field for this purpose to HeapScanDescData.
Previously we also allocated memory for this parallel per-worker data for
all scans, regardless if it was a parallel scan or not. This was just a
wasted allocation for non-parallel scans, so here we make the allocation
conditional on the scan being parallel.
Also, add previously missing pfree() to free the per-worker data in
heap_endscan().
Reported-by: Andres Freund
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20210317023101.anvejcfotwka6gaa@alap3.anarazel.de
The deserialization failed to ensure correct alignment, as it assumed it
can simply point into the serialized value. The serialization however
ignores alignment and copies just the significant bytes in order to make
the result as small as possible. This caused failures on systems that
are sensitive to mialigned addresses, like sparc, or with address
sanitizer enabled.
Fixed by copying the serialized data to ensure proper alignment. While
at it, fix an issue with serialization on big endian machines, using the
same store_att_byval/fetch_att trick as extended statistics.
Discussion: https://postgr.es/0c8c3304-d3dd-5e29-d5ac-b50589a23c8c%40enterprisedb.com
Adds BRIN opclasses similar to the existing minmax, except that instead
of summarizing the page range into a single [min,max] range, the summary
consists of multiple ranges and/or points, allowing gaps. This allows
more efficient handling of data with poor correlation to physical
location within the table and/or outlier values, for which the regular
minmax opclassed tend to work poorly.
It's possible to specify the number of values kept for each page range,
either as a single point or an interval boundary.
CREATE TABLE t (a int);
CREATE INDEX ON t
USING brin (a int4_minmax_multi_ops(values_per_range=16));
When building the summary, the values are combined into intervals with
the goal to minimize the "covering" (sum of interval lengths), using a
support procedure computing distance between two values.
Bump catversion, due to various catalog changes.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Sokolov Yura <y.sokolov@postgrespro.ru>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
Discussion: https://postgr.es/m/5d78b774-7e9c-c94e-12cf-fef51cc89b1a%402ndquadrant.com
Adds a BRIN opclass using a Bloom filter to summarize the range. Indexes
using the new opclasses allow only equality queries (similar to hash
indexes), but that works fine for data like UUID, MAC addresses etc. for
which range queries are not very common. This also means the indexes
work for data that is not well correlated to physical location within
the table, or perhaps even entirely random (which is a common issue with
existing BRIN minmax opclasses).
It's possible to specify opclass parameters with the usual Bloom filter
parameters, i.e. the desired false-positive rate and the expected number
of distinct values per page range.
CREATE TABLE t (a int);
CREATE INDEX ON t
USING brin (a int4_bloom_ops(false_positive_rate = 0.05,
n_distinct_per_range = 100));
The opclasses do not operate on the indexed values directly, but compute
a 32-bit hash first, and the Bloom filter is built on the hash value.
Collisions should not be a huge issue though, as the number of distinct
values in a page ranges is usually fairly small.
Bump catversion, due to various catalog changes.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Sokolov Yura <y.sokolov@postgrespro.ru>
Reviewed-by: Nico Williams <nico@cryptonector.com>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
Discussion: https://postgr.es/m/5d78b774-7e9c-c94e-12cf-fef51cc89b1a%402ndquadrant.com
Commit a1c649d889 changed the signature of the BRIN consistent function
by adding a new required parameter. Treating the parameter as optional,
which would make the change backwards incompatibile, was rejected with
the justification that there are few out-of-core extensions, so it's not
worth adding making the code more complex, and it's better to deal with
that in the extension.
But after further thought, that would be rather problematic, because
pg_upgrade simply dumps catalog contents and the same version of an
extension needs to work on both PostgreSQL versions. Supporting both
variants of the consistent function (with 3 or 4 arguments) makes that
possible.
The signature is not the only thing that changed, as commit 72ccf55cb9
moved handling of IS [NOT] NULL keys from the support procedures. But
this change is backward compatible - handling the keys in exension is
unnecessary, but harmless. The consistent function will do a bit of
unnecessary work, but it should be very cheap.
This also undoes most of the changes to the existing opclasses (minmax
and inclusion), making them use the old signature again. This should
make backpatching simpler.
Catversion bump, because of changes in pg_amproc.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Masahiko Sawada <masahiko.sawada@enterprisedb.com>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
Previously the WAL replay of COMMIT_TS_SETTS record called
TransactionTreeSetCommitTsData() with the argument write_xlog=true,
which generated and wrote new COMMIT_TS_SETTS record.
This should not be acceptable because it's during recovery.
This commit fixes the WAL replay of COMMIT_TS_SETTS record
so that it calls TransactionTreeSetCommitTsData() with write_xlog=false
and doesn't generate new WAL during recovery.
Back-patch to all supported branches.
Reported-by: lx zou <zoulx1982@163.com>
Author: Fujii Masao
Reviewed-by: Alvaro Herrera
Discussion: https://postgr.es/m/16931-620d0f2fdc6108f1@postgresql.org
Change the default_toast_compression GUC to be an enum rather than
a string. Earlier, uncommitted versions of the patch supported using
CREATE ACCESS METHOD to add new compression methods to a running
system, but that idea was dropped before commit. So, we can simplify
the GUC handling as well, which has the nice side effect of improving
the error messages.
While updating the documentation to reflect the new GUC type, also
move it back to the right place in the list. I moved this while
revising what became commit 24f0e395ac,
but apparently the intended ordering is "alphabetical" rather than
"whatever Robert thinks looks nice."
Rejigger things to avoid having access/toast_compression.h depend on
utils/guc.h, so that we don't end up with every file that includes
it also depending on something largely unrelated. Move a few
inline functions back into the C source file partly to help reduce
dependencies and partly just to avoid clutter. A few very minor
cosmetic fixes.
Original patch by Justin Pryzby, but very heavily edited by me,
and reverse reviewed by him and also reviewed by by Tom Lane.
Discussion: http://postgr.es/m/CA+TgmoYp=GT_ztUCeZg2i4hkHAQv8o=-nVJ1-TKWTG1zQOmOpg@mail.gmail.com
To allow inserts in parallel-mode this feature has to ensure that all the
constraints, triggers, etc. are parallel-safe for the partition hierarchy
which is costly and we need to find a better way to do that. Additionally,
we could have used existing cached information in some cases like indexes,
domains, etc. to determine the parallel-safety.
List of commits reverted, in reverse chronological order:
ed62d3737c Doc: Update description for parallel insert reloption.
c8f78b6161 Add a new GUC and a reloption to enable inserts in parallel-mode.
c5be48f092 Improve FK trigger parallel-safety check added by 05c8482f7f.
e2cda3c20a Fix use of relcache TriggerDesc field introduced by commit 05c8482f7f.
e4e87a32cc Fix valgrind issue in commit 05c8482f7f.
05c8482f7f Enable parallel SELECT for "INSERT INTO ... SELECT ...".
Discussion: https://postgr.es/m/E1lMiB9-0001c3-SY@gemulon.postgresql.org
Teach nbtree VACUUM to press on with vacuuming in the event of a page
deletion attempt that fails to "re-find" a downlink for its child/target
page.
There is no good reason to treat this as an irrecoverable error. But
there is a good reason not to: pressing on at this point removes any
question of VACUUM not making progress solely due to misbehavior from
user-defined operator class code.
Discussion: https://postgr.es/m/CAH2-Wzma5G9CTtMjbrXTwOym+U=aWg-R7=-htySuztgoJLvZXg@mail.gmail.com
end_heap_rewrite was not careful to ensure that the target relation
is open at the smgr level before performing its final smgrimmedsync.
In ordinary cases this is no problem, because it would have been
opened earlier during the rewrite. However a crash can be reproduced
by re-clustering an empty table with CLOBBER_CACHE_ALWAYS enabled.
Although that exact scenario does not crash in v13, I think that's
a chance result of unrelated planner changes, and the problem is
likely still reachable with other test cases. The true proximate
cause of this failure is commit c6b92041d, which replaced a call to
heap_sync (which was careful about opening smgr) with a direct call
to smgrimmedsync. Hence, back-patch to v13.
Amul Sul, per report from Neha Sharma; cosmetic changes
and test case by me.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
Once a relation's autovacuum is completed, the logs include more
information about this relation state if the threshold of
log_autovacuum_min_duration (or its relation option) is reached, with
for example contents about the statistics of the VACUUM operation for
the relation, WAL and system usage.
This commit adds more information about the statistics of the relation's
indexes, with one line of logs generated for each index. The index
stats were already calculated, but not printed in the context of
autovacuum yet. While on it, some refactoring is done to keep track of
the index statistics directly within LVRelStats, simplifying some
routines related to parallel VACUUMs.
Author: Masahiko Sawada
Reviewed-by: Michael Paquier, Euler Taveira
Discussion: https://postgr.es/m/CAD21AoAy6SxHiTivh5yAPJSUE4S=QRPpSZUdafOSz0R+fRcM6Q@mail.gmail.com
Previously, to check relation permanence, the Relation's Form_pg_class
structure member relpersistence was compared to the value
RELPERSISTENCE_PERMANENT ("p"). This commit adds the macro
RelationIsPermanent() and is used in appropirate places to simplify the
code. This matches other RelationIs* macros.
This macro will be used in more places in future cluster file encryption
patches.
Discussion: https://postgr.es/m/20210318153134.GH20766@tamriel.snowman.net
The bringetbitmap function allocates memory for various purposes, which
may be quite expensive, depending on the number of scan keys. Instead of
allocating them separately, allocate one bit chunk of memory an carve it
into smaller pieces as needed - all the pieces have the same lifespan,
and it saves quite a bit of CPU and memory overhead.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Masahiko Sawada <masahiko.sawada@enterprisedb.com>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
The handling of IS [NOT] NULL clauses is independent of an opclass, and
most of the code was exactly the same in both minmax and inclusion. So
instead move the code from support procedures to the AM.
This simplifies the code - especially the support procedures - quite a
bit, as they don't need to care about NULL values and flags at all. It
also means the IS [NOT] NULL clauses can be evaluated without invoking
the support procedure.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Reviewed-by: Nikita Glukhov <n.gluhov@postgrespro.ru>
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Masahiko Sawada <masahiko.sawada@enterprisedb.com>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
This commit changes how we pass scan keys to BRIN consistent function.
Instead of passing them one by one, we now pass all scan keys for a
given attribute at once. That makes the consistent function a bit more
complex, as it has to loop through the keys, but it does allow more
elaborate opclasses that can use multiple keys to eliminate ranges much
more effectively.
The existing BRIN opclasses (minmax, inclusion) don't really benefit
from this change. The primary purpose is to allow future opclases to
benefit from seeing all keys at once.
This does change the BRIN API, because the signature of the consistent
function changes (a new parameter with number of scan keys). So this
breaks existing opclasses, and will require supporting two variants of
the code for different PostgreSQL versions. We've considered supporting
two variants of the consistent, but we've decided not to do that.
Firstly, there's another patch that moves handling of NULL values from
the opclass, which means the opclasses need to be updated anyway.
Secondly, we're not aware of any out-of-core BRIN opclasses, so it does
not seem worth the extra complexity.
Bump catversion, because of pg_proc changes.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Reviewed-by: Nikita Glukhov <n.gluhov@postgrespro.ru>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
substring(), and perhaps other callers, isn't careful to pass a
slice length that is no more than the datum's true size. Since
toast_decompress_datum_slice's children will palloc the requested
slice length, this can waste memory. Also, close study of the liblz4
documentation suggests that it is dependent on the caller to not ask
for more than the correct amount of decompressed data; this squares
with observed misbehavior with liblz4 1.8.3. Avoid these problems
by switching to the normal full-decompression code path if the
slice request is >= datum's decompressed size.
Tom Lane and Dilip Kumar
Discussion: https://postgr.es/m/507597.1616370729@sss.pgh.pa.us
The authors of bbe0a81db hadn't quite got the idea that macros named
like SOMETHING_4B_C were only meant for internal endianness-related
details in postgres.h. Choose more legible names for macros that are
intended to be used elsewhere. Rearrange postgres.h a bit to clarify
the separation between those internal macros and ones intended for
wider use.
Also, avoid using the term "rawsize" for true decompressed size;
we've used "extsize" for that, because "rawsize" generally denotes
total Datum size including header. This choice seemed particularly
unfortunate in tests that were comparing one of these meanings to
the other.
This patch includes a couple of not-purely-cosmetic changes: be
sure that the shifts aligning compression methods are unsigned
(not critical today, but will be when compression method 2 exists),
and fix broken definition of VARATT_EXTERNAL_GET_COMPRESSION (now
VARATT_EXTERNAL_GET_COMPRESS_METHOD), whose callers worked only
accidentally.
Discussion: https://postgr.es/m/574197.1616428079@sss.pgh.pa.us
Any transactions found as still prepared by a checkpoint have their
state data read from the WAL records generated by PREPARE TRANSACTION
before being moved into their new location within pg_twophase/. While
reading such records, the WAL reader uses the callback
read_local_xlog_page() to read a page, that is shared across various
parts of the system. This callback, since 1148e22a, has introduced an
update of ThisTimeLineID when reading a record while in recovery, which
is potentially helpful in the context of cascading WAL senders.
This update of ThisTimeLineID interacts badly with the checkpointer if a
promotion happens while some 2PC data is read from its record, as, by
changing ThisTimeLineID, any follow-up WAL records would be written to
an timeline older than the promoted one. This results in consistency
issues. For instance, a subsequent server restart would cause a failure
in finding a valid checkpoint record, resulting in a PANIC, for
instance.
This commit changes the code reading the 2PC data to reset the timeline
once the 2PC record has been read, to prevent messing up with the static
state of the checkpointer. It would be tempting to do the same thing
directly in read_local_xlog_page(). However, based on the discussion
that has led to 1148e22a, users may rely on the updates of
ThisTimeLineID when a WAL record page is read in recovery, so changing
this callback could break some cases that are working currently.
A TAP test reproducing the issue is added, relying on a PITR to
precisely trigger a promotion with a prepared transaction still
tracked.
Per discussion with Heikki Linnakangas, Kyotaro Horiguchi, Fujii Masao
and myself.
Author: Soumyadeep Chakraborty, Jimmy Yih, Kevin Yeap
Discussion: https://postgr.es/m/CAE-ML+_EjH_fzfq1F3RJ1=XaaNG=-Jz-i3JqkNhXiLAsM3z-Ew@mail.gmail.com
Backpatch-through: 10
Maintain a simple array of metadata about pages that were deleted during
nbtree VACUUM's current btvacuumscan() call. Use this metadata at the
end of btvacuumscan() to attempt to place newly deleted pages in the FSM
without further delay. It might not yet be safe to place any of the
pages in the FSM by then (they may not be deemed recyclable), but we
have little to lose and plenty to gain by trying. In practice there is
a very good chance that this will work out when vacuuming larger
indexes, where scanning the index naturally takes quite a while.
This commit doesn't change the page recycling invariants; it merely
improves the efficiency of page recycling within the confines of the
existing design. Recycle safety is a part of nbtree's implementation of
what Lanin & Shasha call "the drain technique". The design happens to
use transaction IDs (they're stored in deleted pages), but that in
itself doesn't align the cutoff for recycle safety to any of the
XID-based cutoffs used by VACUUM (e.g., OldestXmin). All that matters
is whether or not _other_ backends might be able to observe various
inconsistencies in the tree structure (that they cannot just detect and
recover from by moving right). Recycle safety is purely a question of
maintaining the consistency (or the apparent consistency) of a physical
data structure.
Note that running a simple serial test case involving a large range
DELETE followed by a VACUUM VERBOSE will probably show that any newly
deleted nbtree pages are not yet reusable/recyclable. This is expected
in the absence of even one concurrent XID assignment. It is an old
implementation restriction. In practice it's unlikely to be the thing
that makes recycling remain unsafe, at least with larger indexes, where
recycling newly deleted pages during the same VACUUM actually matters.
An important high-level goal of this commit (as well as related recent
commits e5d8a999 and 9f3665fb) is to make expensive deferred cleanup
operations in index AMs rare in general. If index vacuuming frequently
depends on the next VACUUM operation finishing off work that the current
operation started, then the general behavior of index vacuuming is hard
to predict. This is relevant to ongoing work that adds a vacuumlazy.c
mechanism to skip index vacuuming in certain cases. Anything that makes
the real world behavior of index vacuuming simpler and more linear will
also make top-down modeling in vacuumlazy.c more robust.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzk76_P=67iUscb1UN44-gyZL-KgpsXbSxq_bdcMa7Q+wQ@mail.gmail.com
Compilers that don't understand that elog(ERROR) doesn't return
issued warnings here. In the cases in libpq_pipeline.c, we were
not exactly helping things by failing to mark pg_fatal() as noreturn.
Per buildfarm.
When compressing the BRIN summary, we can't simply use the compression
method from the indexed attribute. The summary may use a different data
type, e.g. fixed-length attribute may have varlena summary, leading to
compression failures. For the built-in BRIN opclasses this happens to
work, because the summary uses the same data type as the attribute.
When the data types match, we can inherit use the compression method
specified for the attribute (it's copied into the index descriptor).
Otherwise we don't have much choice and have to use the default one.
Author: Tomas Vondra
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/e0367f27-392c-321a-7411-a58e1a7e4817%40enterprisedb.com
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
Commit 05c8482f7f added the implementation of parallel SELECT for
"INSERT INTO ... SELECT ..." which may incur non-negligible overhead in
the additional parallel-safety checks that it performs, even when, in the
end, those checks determine that parallelism can't be used. This is
normally only ever a problem in the case of when the target table has a
large number of partitions.
A new GUC option "enable_parallel_insert" is added, to allow insert in
parallel-mode. The default is on.
In addition to the GUC option, the user may want a mechanism to allow
inserts in parallel-mode with finer granularity at table level. The new
table option "parallel_insert_enabled" allows this. The default is true.
Author: "Hou, Zhijie"
Reviewed-by: Greg Nancarrow, Amit Langote, Takayuki Tsunakawa, Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1K-cW7svLC2D7DHoGHxdAdg3P37BLgebqBOC2ZLc9a6QQ%40mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com
While looking at Robert Foggia's report, I noticed a passel of
other issues in the same area:
* The scheme for backslash-quoting newlines in pathnames is just
wrong; it will misbehave if the last ordinary character in a pathname
is a backslash. I'm not sure why we're bothering to allow newlines
in tablespace paths, but if we're going to do it we should do it
without introducing other problems. Hence, backslashes themselves
have to be backslashed too.
* The author hadn't read the sscanf man page very carefully, because
this code would drop any leading whitespace from the path. (I doubt
that a tablespace path with leading whitespace could happen in
practice; but if we're bothering to allow newlines in the path, it
sure seems like leading whitespace is little less implausible.) Using
sscanf for the task of finding the first space is overkill anyway.
* While I'm not 100% sure what the rationale for escaping both \r and
\n is, if the idea is to allow Windows newlines in the file then this
code failed, because it'd throw an error if it saw \r followed by \n.
* There's no cross-check for an incomplete final line in the map file,
which would be a likely apparent symptom of the improper-escaping
bug.
On the generation end, aside from the escaping issue we have:
* If needtblspcmapfile is true then do_pg_start_backup will pass back
escaped strings in tablespaceinfo->path values, which no caller wants
or is prepared to deal with. I'm not sure if there's a live bug from
that, but it looks like there might be (given the dubious assumption
that anyone actually has newlines in their tablespace paths).
* It's not being very paranoid about the possibility of random stuff
in the pg_tblspc directory. IMO we should ignore anything without an
OID-like name.
The escaping rule change doesn't seem back-patchable: it'll require
doubling of backslashes in the tablespace_map file, which is basically
a basebackup format change. The odds of that causing trouble are
considerably more than the odds of the existing bug causing trouble.
The rest of this seems somewhat unlikely to cause problems too,
so no back-patch.
Robert Foggia of Trustwave reported that read_tablespace_map()
fails to prevent an overrun of its on-stack input buffer.
Since the tablespace map file is presumed trustworthy, this does
not seem like an interesting security vulnerability, but still
we should fix it just in the name of robustness.
While here, document that pg_basebackup's --tablespace-mapping option
doesn't work with tar-format output, because it doesn't. To make it
work, we'd have to modify the tablespace_map file within the tarball
sent by the server, which might be possible but I'm not volunteering.
(Less-painful solutions would require changing the basebackup protocol
so that the source server could adjust the map. That's not very
appetizing either.)
This commit changes WAL archiver process so that it's treated as
an auxiliary process and can use shared memory. This is an infrastructure
patch required for upcoming shared-memory based stats collector patch
series. These patch series basically need any processes including archiver
that can report the statistics to access to shared memory. Since this patch
itself is useful to simplify the code and when users monitor the status of
archiver, it's committed separately in advance.
This commit simplifies the code for WAL archiving. For example, previously
backends need to signal to archiver via postmaster when they notify
archiver that there are some WAL files to archive. On the other hand,
this commit removes that signal to postmaster and enables backends to
notify archier directly using shared latch.
Also, as the side of this change, the information about archiver process
becomes viewable at pg_stat_activity view.
Author: Kyotaro Horiguchi
Reviewed-by: Andres Freund, Álvaro Herrera, Julien Rouhaud, Tomas Vondra, Arthur Zakirov, Fujii Masao
Discussion: https://postgr.es/m/20180629.173418.190173462.horiguchi.kyotaro@lab.ntt.co.jp
Consistently set a flag variable that tracks whether the current heap
page has a dead item during lazy vacuum's heap scan. We missed the
common case where there is an preexisting (or even a new) LP_DEAD heap
line pointer.
Also make it clear that the variable might be affected by an existing
line pointer, say from an earlier opportunistic pruning operation. This
distinction is important because it's the main reason why we can't just
use the nearby tups_vacuumed variable instead.
No backpatch. In theory failing to set the page level flag variable had
no consequences. Currently it is only used to defensively check if a
page marked all visible has dead items, which should never happen anyway
(if it does then the table must be corrupt).
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Diagnosed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAtZb4+HJT_8RoOXvu4HM-Zd4HKS3YSMCH6+-W=bDyh-w@mail.gmail.com
Simplify _bt_vacuum_needs_cleanup() functions's signature (it only needs
a single 'rel' argument now), and move it next to its sibling function
in nbtpage.c.
I believe that _bt_vacuum_needs_cleanup() was originally located in
nbtree.c due to an include dependency issue. That's no longer an issue.
Follow-up to commit 9f3665fb.
Peter Geoghegan
Tom Lane
Fujii Masao
Tomas Vondra
Noah Misch
David Rowley
Robert Haas
Michael Paquier
Peter Eisentraut
Amit Kapila
Bruce Momjian
Stephen Frost