Here is a patch to bring both libpq and psql to a state where it compiles on
win32 (native) again. A lot of things have changed, and I have not been able
to keep up with them all, so it has been broken for quite a while.
After this patch, at least it compiles. It also talks "basic talk" to the
server, but I have not yet tested all things. Sending queries, and using
e.g. \d or \dt works fine. The rest will have to be tested further.
It also bumps the version on libpq.dll to 7.0.
Everything should be enclosed in #ifdef WIN32, unless I have missed
something. Except for one or maybe two places where I have moved a #include
that should not be used on win32 from the "global area" into a "#ifndef
WIN32 area".
//Magnus
by creating a race condition. It wasn't waiting for select() to say
write-ready immediately after connect, which meant that you might get
an unhelpful 'broken pipe' error message if connect failed, rather than
the intended error message.
in libpq --- mostly, poor response to error conditions. You now actually
get to see the postmaster's 'The Data Base System is starting up' message,
which you didn't before. I suspect the SSL code is still broken though.
parameter in some flavor of Unix, but Linux, HPUX, and SunOS all say
it's int. For now I'm just going to make it int so that I can compile.
If the other way is actually necessary on some Unix somewhere, I guess
we will need a configure test...
PQconnectStart
PQconnectPoll
PQresetStart
PQresetPoll
PQsetenvStart
PQsetenvPoll
PQsetenvAbort
and brings into the published interface
PQsetenv.
The first four are asynchronous analogues of PQconnectdb and PQreset -
they allow an application to connect to the DB without blocking on
remote I/O.
The PQsetenv functions perform an environment negotiation with the
server.
Internal to libpq, pqReadReady and pqWriteReady have been made available
across the library (they were previously static functions inside
fe-misc.c). A lot of internal rearrangement has been necessary to
support these changes.
The API documentation has been updated also.
Caveats:
o The Windows code does not default to using non-blocking sockets,
since I have no documentation: Define WIN32_NON_BLOCKING_CONNECTIONS to
do that.
o The SSL code still blocks.
Ewan Mellor.
* Add use of 'const' for varibles in source tree
(which is misspelled, btw.)
I went through the front-end libpq code and did so. This affects in
particular the various accessor functions (such as PQdb() and
PQgetvalue()) as well as, by necessity, the internal helpers they use.
I have been really thorough in that regard, perhaps some people will find
it annoying that things like
char * foo = PQgetvalue(res, 0, 0)
will generate a warning. On the other hand it _should_ generate one. This
is no real compatibility break, although a few clients will have to be
fixed to suppress warnings. (Which again would be in the spirit of the
above TODO.)
In addition I replaced some int's by size_t's and removed some warnings
(and generated some new ones -- grmpf!). Also I rewrote PQoidStatus (so it
actually honors the const!) and supplied a new function PQoidValue that
returns a proper Oid type. This is only front-end stuff, none of the
communicaton stuff was touched.
The psql patch also adds some new consts to honor the new libpq situation,
as well as fixes a fatal condition that resulted when using the -V
(--version) option and there is no database listening.
So, to summarize, the psql you should definitely put in (with or without
the libpq). If you think I went too far with the const-mania in libpq, let
me know and I'll make adjustments. If you approve it, I will also update
the docs.
-Peter
--
Peter Eisentraut Sernanders vaeg 10:115
One, it now returns the previous hook. That way people don't have to dig
around in libpq-int.h for that information anymore. It previously
returned void, so there should be no incompatibilities.
Second, you cannot set the callback to NULL anymore. (Of course you can
still call it with NULL just to get the current hook.) The way libpq uses
the callback pointer, having a NULL there wasn't very healthy.
Peter Eisentraut
eliminating some wildly inconsistent coding in various parts of the
system. I set MAXPGPATH = 1024 in config.h.in. If anyone is really
convinced that there ought to be a configure-time test to set the
value, go right ahead ... but I think it's a waste of time.
I have changed a bit the makefiles for the win32 port - the *.def files
(created when building shared libraries) are now clean from
Makefile.shlib.
I have also removed "-g" from CFLAGS in the "cygwin32" template - it can
be
enabled when running configure.
Dan
When drawing up a very simple "text-drawing" of how the negotiation is done,
I realised I had done this last part (fallback) in a very stupid way. Patch
#4 fixes this, and does it in a much better way.
Included is also the simple text-drawing of how the negotiation is done.
//Magnus
message under a kernel that only returns one packet per recv() call. This
didn't use to matter much, but it starts to get annoying with multi-megabyte
EXPLAIN VERBOSE responses...
error/notice message lengths, and number of fields per tuple. Add
pqexpbuffer.c/.h, a frontend version of backend's stringinfo module.
This is first step in applying Mike Ansley's long-query patches,
even though he didn't do any of these particular changes...
> (native win32, not cygnus).
> It does the following:
> Patches two win32.mak files to DEFINE HAVE_VSNPRINTF and
> HAVE_STRDUP. This is required to build at all.
> Bumps the version number on libpq.dll from 6.4 to 6.5.
> Required for install programs to work.
> Adds defintions for BLCKSZ and MAXIMUM_ALIGN to "win32.h" in
> the client-side libpiq directory.
>
> All these files are only used when building on native win32,
> so it should be safe I think.
>
> Again, really sorry to throw this in so late, but I would
> hate to do the same thing as with 6.4 (which required 6.4.1
> to at all compile on Win32).
>
> Thanks,
>
> //Magnus
do the right thing: look for a NOTICE message from the backend before we
close our side of the socket. 6.4 libpq did not reliably print the backend's
hara-kiri message, 'The Postmaster has informed me ...', because it only
did the right thing if connection closure was detected during a read
attempt instead of a write attempt.
been applied. The patches are in the .tar.gz attachment at the end:
varchar-array.patch this patch adds support for arrays of bpchar() and
varchar(), which where always missing from postgres.
These datatypes can be used to replace the _char4,
_char8, etc., which were dropped some time ago.
block-size.patch this patch fixes many errors in the parser and other
program which happen with very large query statements
(> 8K) when using a page size larger than 8192.
This patch is needed if you want to submit queries
larger than 8K. Postgres supports tuples up to 32K
but you can't insert them because you can't submit
queries larger than 8K. My patch fixes this problem.
The patch also replaces all the occurrences of `8192'
and `1<<13' in the sources with the proper constants
defined in include files. You should now never find
8192 hardwired in C code, just to make code clearer.
--
Massimo Dal Zotto
would be a Bad Thing.
For what it's worth, I found another case in libpq where you can get a T
message without a D that my utility patch needs to handle. I have
attached
the updated patch against the 6.4.2 version of
src/interfaces/libpq/fe-exec.c
Jerry Gay
Just in case you'd like to see what I was talking about, I am
attaching
my patch to src/interfaces/libpq/fe-exec.c to prevent utility functions
called from SPI from locking up the client.
Jerry Gay
authentifica
tion
working with postgresql-6.4.2 and KTH-KRB Ebones
(http://www.pdc.kth.se/kth-kr
b) on a dec alpha running DU 4.0D using the native compiler. The
following
patch does the trick.
The rationale behind this is as follows. The KTH-KRB code header files
defines
lots of lengths like INST_SZ,REALM_SZ and KRB_SENDAUTH_VLEN. It also has
a
habit of doing things like
chararray[LENGTH] = '\0'
to ensure null terminated strings. In my instance this just happens to
blat
the kerberos principal instance string leading to error like
pg_krb4_recvauth: kerberos error: Can't decode authenticator
(krb_rd_req
)
The application code that comes with KTH-KRB uses "KRB_SENDAUTH_VLEN +
1" and
sometimes uses "INST_SZ + 1" so it seems safest to put that 1 char
buffer in
the appropriate place.
Rodney McDuff
palloc.h again. Move exporting of backend header files out of libpq's
Makefile (whatever was it doing there in the first place?) and into
backend/Makefile.
Ok. I made patches replacing all of "#if FALSE" or "#if 0" to "#ifdef
NOT_USED" for current. I have tested these patches in that the
postgres binaries are identical.
comparisons correctly. The psql monitor converts all table and field
names to lower case. If the PQfnumber function is called with a mixed
case name, it will always return -1.
Bahman Rafatjoo
o allow to use Big5 (a Chinese encoding used in Taiwan) as a client
encoding. In this case the server side encoding should be EUC_TW
o add EUC_TW and Big5 test cases to the regression and the mb test
(contributed by Jonah Kuo)
o fix mistake in include/mb/pg_wchar.h. An encoding id for EUC_TW was
not correct (was 3 and now is 4)
o update documents (doc/README.mb and README.mb.jp)
o update psql helpfile (bin/psql/psqlHelp.h)
--
Tatsuo Ishii
t-ishii@sra.co.jp
Included patches fix a portability problem of unsetenv() used in
6.4.2 multi-byte support. unsetenv() is only avaliable on FreeBSD and
Linux so I decided to replace with putenv().
missed before the release. It's simply a symbol that is undefined. This
patch defines this symbol in "win32.h", so it should have no effect on any
other platforms. It should go into 6.4.1 if possible, since compilation is
completely broken without it.
I am also attaching a patch for the "win32.mak" file - it leaves a file
behind when doing "make clean" after the library is built on Visual C++ 6.0.
This is not at all as urgent, but I don't see it breaking here, so I think
it might as well go in there too?
//Magnus
src/Makefile.shlib. Updated all the makefiles that try to build shlibs
to include that file instead of having duplicate (and mostly incomplete)
copies of shared-library options. It works on HPUX, a lot better than it
did before in fact, but there's a chance I broke some other platforms.
At least now you only have to fix one place not six...
Get the permissions right, don't overwrite real files with symlinks, etc.
plpgsql and odbc still aren't fully up to speed, but at least they don't crash and burn...
Here are patches needed to complie under AIX 4.2.
I changed configure.in, pqcomm.c, config.h.in, and fe-connect.c.
Also I had to install flex because lex did not want to translate pgc.l.
Here are two new patches for the Win32 support.
1) The patch based on the one from Hiroshi Inoue [Inoue@tpf.co.jp], to
load
Winsock.dll from libpq.dll.
2) A patch for psql.c to remove the call to WSAStartup(), since it is
not
required when it's done in libpq.dll.
I'm still looking for the possibility of having a crypt() function in
libpq.dll too, the same way getopt was included. Any chance of getting
this
before 6.4, or should we wait for the next one?
//Magnus
regression test on a FreeBSD box with both non-MULTIBYTE and
MULTIBYTE-enabled, and confirmed that the results are same.
However I do not tested on PCs(I don't have access to win). Please let
me know if the patches break anything on PCs.
Also please note that the patch for varchar.c is a fix for a nasty bug
of char(n) types that I introduced and I believe at least this should
be applied.
Tatsuo Ishii
structs from libpq-fe.h, as we previously discussed.
There turned out to be sloppy coding practices in more places than
I had realized :-(, but all in all I think it was a well-worth-while
exercise.
I ended up adding several routines to libpq's API in order to respond
to application requirements that were exposed by this work. I owe the
docs crew updates for libpq.sgml to describe these changes. I'm way too
tired to work on the docs tonight, however.
This is the last major change I intend to submit for 6.4. I do want
to see if I can make libpgtcl work with Tcl 8.0 before we go final,
but hopefully that will be a minor bug fix.
Here is a new patch for libpq, to make it work on Win32 again (since
the latest modifications broke it a little).
Please also add the file "libpq.rc" to the interfaces/libpq directory.
This will allow version-stamping of the generated DLL file, so that
automatic install programs (and interested users) can determine
the version of the file. The file is currently set as "prerelease".
Before the release, somebody should change the line "FILEFLAGS
VS_FF_PRERELEASE" to "FILEFLAGS 0". That information should probably
go into toos\RELEASE_CHANGES.
The patch is against the cvs as of ~ 1998-08-26 14:30 CEST.
//Magnus
Summary of changes:
In pqcomm.h, use the SUN_LEN macro if it is defined to calculate
the size of the sockaddr_un structure.
In unixware.h, drop the use of the UNIXWARE macro. Everything can
be handled with the USE_UNIVEL_CC and DISABLE_COMPLEX_MACRO macros.
In s_lock.h, remove the reference to the UNIXWARE macro (see above).
In the unixware template, add the YFLAGS:-d line.
In various makefile templates, add (or cleanup) unixware and univel
port specific information.
-- Billy G. Allie
From: Tom Lane <tgl@sss.pgh.pa.us>
Attached is a patch for this weekend's work on libpq. I've dealt
with several issues:
<for details: see message, in pgsql-patches archive for above data>
couple weeks ago on the hackers and interfaces lists:
1. When the backend sends a NOTICE message and closes the connection
(typically, because it was told to by the postmaster after
another backend coredumped), libpq will now print the notice
and close the connection cleanly. Formerly, the frontend app
would usually terminate ungracefully due to a SIGPIPE. (I am
not sure if 6.3.2 behaved that way, but the current cvs sources
do...)
2. libpq's various printouts to stderr are now fed through a single
"notice processor" routine, which can be overridden by the
application to direct notices someplace else. This should ease
porting libpq to Windows.
I also noticed and fixed a problem in PQprint: when sending output
to a pager subprocess, it would disable SIGPIPE in case the pager
terminates early (this is good) --- but afterwards it reset SIGPIPE
to SIG_DFL, rather than restoring the application's prior setting
(bad).
regards, tom lane
As Bruce mentioned, this is due to the conflict among changes we made.
Included patches should fix the problem(I changed all MB to
MULTIBYTE). Please let me know if you have further problem.
P.S. I did not include pathces to configure and gram.c to save the
file size(configure.in and gram.y modified).
From: t-ishii@sra.co.jp
Attached are patches to enhance the multi-byte support. (patches are
against 7/18 snapshot)
* determine encoding at initdb/createdb rather than compile time
Now initdb/createdb has an option to specify the encoding. Also, I
modified the syntax of CREATE DATABASE to accept encoding option. See
README.mb for more details.
For this purpose I have added new column "encoding" to pg_database.
Also pg_attribute and pg_class are changed to catch up the
modification to pg_database. Actually I haved added pg_database_mb.h,
pg_attribute_mb.h and pg_class_mb.h. These are used only when MB is
enabled. The reason having separate files is I couldn't find a way to
use ifdef or whatever in those files. I have to admit it looks
ugly. No way.
* support for PGCLIENTENCODING when issuing COPY command
commands/copy.c modified.
* support for SQL92 syntax "SET NAMES"
See gram.y.
* support for LATIN2-5
* add UNICODE regression test case
* new test suite for MB
New directory test/mb added.
* clean up source files
Basic idea is to have MB's own subdirectory for easier maintenance.
These are include/mb and backend/utils/mb.
The attached patches respond to discussion that was on pgsql-hackers
around the beginning of June (see thread "libpgtcl bug (and symptomatic
treatment)"). The changes are:
1. Remove code in connectDB that throws away the password after making
a connection. This doesn't really add much security IMHO --- a bad guy
with access to your client's address space can likely extract the
password anyway, to say nothing of what he might do directly. And
there's the serious shortcoming that it prevents PQreset() from working
if the database requires a password.
2. Fix coredump problem: fe_sendauth did not guard against being handed
a NULL password pointer. (This is the proximate cause of the coredump-
during-PQreset problem that Magosanyi Arpad complained of last month.)
3. Remove highly questionable "error recovery" logic in libpgtcl's
pg_exec statement.
I believe the consensus of the discussion last month was in favor of
#1 and #3, but I'm just now getting around to making the change.
I realized that #2 was a bug in process of looking at the change.
Making PQrequestCancel safe to call in a signal handler turned out to be
much easier than I feared. So here are the diffs.
Some notes:
* I modified the postmaster's packet "iodone" callback interface to allow
the callback routine to return a continue-or-drop-connection return
code; this was necessary to allow the connection to be closed after
receiving a Cancel, rather than proceeding to launch a new backend...
Being a neatnik, I also made the iodone proc have a typechecked
parameter list.
* I deleted all code I could find that had to do with OOB.
* I made some edits to ensure that all signals mentioned in the code
are referred to symbolically not by numbers ("SIGUSR2" not "2").
I think Bruce may have already done at least some of the same edits;
I hope that merging these patches is not too painful.
Through some minor changes, I have been able to compile the libpq
client libraries on the Win32 platform. Since the libpq communications
part has been rewritten, this has become much easier. Enclosed is
a patch that will allow at least Microsoft Visual C++ to compile
libpq into both a static and a dynamic library. I will take a look
at porting the psql frontend as well, but I figured it was a good
idea to send in these patches first - so no major changes are done
to the files before it gets applied (if it does).
Regards,
Magnus Hagander
I have implemented a framework of encoding translation between the
backend and the frontend. Also I have added a new variable setting
command:
SET CLIENT_ENCODING TO 'encoding';
Other features include:
Latin1 support more 8 bit cleaness
See doc/README.mb for more details. Note that the pacthes are
against May 30 snapshot.
Tatsuo Ishii
1. Rewritten libpq to allow asynchronous clients.
2. Implemented client side of cancel protocol in library,
and patched psql.c to send a cancel request upon SIGINT. The
backend doesn't notice it yet :-(
3. Implemented 'Z' protocol message addition and renaming of
copy in/out start messages. These are implemented conditionally,
ie, the client protocol version is checked; so the code should
still work with 1.0 clients.
4. Revised protocol and libpq sgml documents (don't have an SGML
compiler, though, so there may be some markup glitches here).
What remains to be done:
1. Implement addition of atttypmod field to RowDescriptor messages.
The client-side code is there but ifdef'd out. I have no idea
what to change on the backend side. The field should be sent
only if protocol >= 2.0, of course.
2. Implement backend response to cancel requests received as OOB
messages. (This prolly need not be conditional on protocol
version; just do it if you get SIGURG.)
3. Update libpq.3. (I'm hoping this can be generated mechanically
from libpq.sgml... if not, will do it by hand.) Is there any
other doco to fix?
4. Update non-libpq interfaces as necessary. I patched libpgtcl
so that it would compile, but haven't tested it. Dunno what
needs to be done with the other interfaces.
Have at it!
Tom Lane
If PQfn() receives NOTICEs from the backend, it fails because there is no
provision to deal with them.
This patch (supplied by Anders Hammarquist <iko@netg.se> to me as Debian
maintainer of postgresql) cures the problem:
HP-UX (all versions) requires shared libraries to have execute
permission, and really needs them to be exactly mode 555 for
performance reasons. The standard configure/install procedure
installs libpq.sl as mode 644, which DOES NOT WORK.
The attached patch modifies the makefiles to distinguish
INSTL_LIB_OPTS (install mode for ordinary libraries) from
INSTL_SHLIB_OPTS (mode for shared libs), and adds a test
to configure to set INSTL_SHLIB_OPTS="-m 555" when on HP-UX.
Here's a fix for a tiny memory leak in PQsetdb/PQfinish.
(Analysis of a running program indicates there are several others, but
this is the only obvious one I saw in the code).
Attached you'll find a (big) patch that fixes make dep and make
depend in all Makefiles where I found it to be appropriate.
It also removes the dependency in Makefile.global for NAMEDATALEN
and OIDNAMELEN by making backend/catalog/genbki.sh and bin/initdb/initdb.sh
a little smarter.
This no longer requires initdb.sh that is turned into initdb with
a sed script when installing Postgres, hence initdb.sh should be
renamed to initdb (after the patch has been applied :-) )
This patch is against the 6.3 sources, as it took a while to
complete.
Please review and apply,
Cheers,
Jeroen van Vianen
a dumpall. This has been happening when a second \connect is
encountered.
The faulty code was in fe-connect.c, where the memory for the user
password was freed, but the pointer itself was not set to NULL.
Later, the memory was reused and the password appeared not to be
empty, so that an attempt was made to reference it.
Oliver Elphick
--------------------------------------------------------------------------
Test Case: ----------
--------------------------------------------------------------------------
Solution: --------- Add this to the libpq and libpq++ Makefiles
to build shared libs:
Mike Ferrara
extern char *sys_errlist[]; #define strerror(A) (sys_errlist[(A)])
#endif /* sunos4
*/
is picked up by Solaris when the above is intended only for SunOS.
Fix Solaris. Albert Chin-A-Young
The following patch is to src/interfaces/libpq of postgresql-6.3.
The purpose of the patch is to make the initialization of
const char *pgresStatus[] match the ExecStatusType enum.
This patch will...
1. Remove the "-Wall" option from the ecpg/lib and ecpg/preproc Makefile.
2. Remove the addition of $(SRCDIR)/include and-or $(SRCDIR)/backend from
ecpg/lib, ecpg/preproc, libpq and utils Makefiles. Already in CFLAGS...
3. Set MK_NO_LORDER and RANLIB in Makefile.aix to avoid a couple of extra
steps taken care of by the 'ld' command anyways.
Ok. I have decided to use:
#if defined(sun) && if defined(sparc) && !defined(__svr4)
instead of defined(sunos4). interfaces/libpq/libpq-fe.h and
include/c.h have been modified(see included patches).
Another porblems I have found are:
o SunOS lacks strtoul(). to fix this I stole strtoul.c from FreeBSD
and place it under backend/port. necessary modifications have been
also made to backend/port/Makefile.in, include/config.h.in and
configure.in (see included patches).
Apart from this Makefile hack, all I've done is to make dynamically
loaded code modules fail properly (as was already done for __mips__,
although I think this is too loose: I believe NetBSD for the pmax can
do dynamic linking), and to add test-and-set lock handling. As Bruce
suggested, this is done in a maximally efficient inlined way: I was
not aware that this code was so important, speed-wise.
I haven't had final confirmation from Peter yet, but the attached patch
needs to be applied for the Beta otherwise password and crypt
authentication just won't work.
It puts back the loop in libpq and also fixes a couple of problems with
maintaining compatability with pre-6.3 drivers.
Attached is the patch to fix the warning messages from my code. I also
fixed one which wasn't my code. Apart from the usual warnings about the
bison/yacc generated code I only have one other warning message. This
is in gramm.y around line 2234. I wasn't sure of the fix.
I've also replaced all the calls to free() in gramm.y to calls to
pfree(). Without these I was getting backend crashes with GRANT. This
might already have been fixed.
This has a problem when using any authentication other than trust or
ident.
Anything using libpq will hang, because the client will go into a loop
while connecting. The following patch simply comments out two lines (a do
and a while), removing the loop. Going through the new scheme, I can't see
why this do..while loop is in there.
I've completed the patch to fix the protocol and authentication issues I
was discussing a couple of weeks ago. The particular changes are:
- the protocol has a version number
- network byte order is used throughout
- the pg_hba.conf file is used to specify what method is used to
authenticate a frontend (either password, ident, trust, reject, krb4
or krb5)
- support for multiplexed backends is removed
- appropriate changes to man pages
- the -a switch to many programs to specify an authentication service
no longer has any effect
- the libpq.so version number has changed to 1.1
The new backend still supports the old protocol so old interfaces won't
break.
The attached patches will allow postgreSQL to compile successfully on SCO
UNIXWARE 2.1.x. The patches fix the following problems:
1. Configure did not properly recognize the UNIXWARE system as needing the
univel port. It used the sys4 port.
2. Configure did not properly process the CC flag in the template file.
3. There was no working test and set locking implementation for the native
UNIXWARE compiler.
4. The test and set locking used for Intel X86 that was selected by defining
NEED_I386_TAS_ASM could fail in a multi-processor environment.
5. The makefiles for libpq and libpgtcl did not make a shared library for
the univel port.
OK, here comes a patch, DBD::Pg (and possibly other 3rd party clients)
can connect to unix sockets.
Patch is against current source tree.
Background:
libpq set some policy for client, which it should not
IMHO. It prevent some 3rd party clients to connect with
unix domain sockets etc.
reference to the name of the shared library, instead of dereferencing
the definition from the top of the file.
From: Tom I Helbekkmo <tih@Hamartun.Priv.NO>
Rename PG_DATESTYLE to PGDATESTYLE environment variable.
Move environment variable code to a different place so it now works!
Note that regression tests can now run with "setenv PGTZ PST8PDT"
at the frontend rather than requiring the backend to have TZ set.
Subject: [PATCHES] More psql and libpq patches
Well..these would be the last patches until the release (I hope)...
I ran the regression tests while watching psql under purify, and it did
not leak even one byte.
In this patch:
* Plugged a major leak when PSQL reads files for input (either through
\i options or through -f option)
* Fixed the one remaining leak in PSQL in not clearing PGresult *results
everywhere it is supposed to. (Thanks Tymm)
* Fixed A small leak in PSQL not clearing all the PGsettings correctly.
* A not-so-obvious (but small) leak in Libpq when PQsetdb fails for any
reason.
* Added \n to some Libpq error messages to make them easier to digest..
* Finally, added /* PURIFY */ comment to some of the code indicating
the reason for why it was added/changed...for future developers.
Subject: [PATCHES] memory leak patches in libpq and psql
A couple of small memory leak patches (detected with Purify) primarily
in libpq.
* Fixed (NULL) border problem in psql (run psql, do \m, then select
something from a table...row separators will be nulls)
* Fixed memory leak with the abovementioned border not being freed
properly.
* Fixed memory leak in freePGconn() not freeing conn->port
* Fixed up PQclear() to free parts of PGresult only if these
parts are not null.
* Fixed a decent memory leak that occured after executing every command
in psql. PGresult *results was not freed most of the time.
There is still a leak being detected (2 bytes) in readline functions, but
I think this is old readline library. I will install new one and test it.
Subject: [PATCHES] libpq patch
Hi,
here is a small patch which fixes two problems:
1. libpq/libpq-fe.h:
somehow disappeared the line
#define DefaultOption ""
now compilation stops with an error complainig an
unknown DefaultOption (970508).
2. Same patch as I sent already twice, but it never made it
into the source tree: there is no default value for
AuthType and Password. This way any libpq-application
(i.e. perl-scripts) which use the function PQconnectdb
will break with PostgreSQL-6.1. The patch simply uses
an empty string as default value.
Subject: [PATCHES] libpq SET var TO patch
One last, I hope. This one corrects a bogus format string, and
actually sends the contents of PG_DATESTYLE to the backend. That
means, you can do a setenv PG_DATESTYLE 'iso', and your libpq
will pick that up and tell the backend.
Subject: [PATCHES] 970417: some large object patches
Two patches here, made against 970417. Both have to do with large
objects:
1. lobjfuncs was not initialized in PQconnectdb. This causes
failure later if large objects are used. (Someone already
caught this error in PQsetdb.)
2. Postgres functions lo_import and lo_export sometimes
produce garbage for the file names because the filename
strings aren't always terminated by \0. (VARDATA isn't
necessarily null terminated.)
FreeBSD
The Makefile(s) have all been cleaned up such that there is a single
LDFLAGS vs LD_ADD or LDADD or LDFLAGS or LDFLAGS_BE. The Makefile(s)
should be alot more straightforward then they were before...and
consistent
The first fixes a warning from gcc about the assignment within the condition.
The extra set of parens should not make a difference, but with -Werror, they
are necessary.
The second fixes an "ln -s" invocation that assumes the current directory is
implicitly the target if not specified. Not true in all cases, and again, it
should not make a difference except to those implementation that it does.
From: "Michael P. Snyder" <msnyder@hawkeye.huntersmoon.com>
nicer. Also, I grabbed my copy of the Informix manual, and
added a couple of variables that make sense (formats for
money, time, a language setting, a timezone).
- New functions SetPGVariable() and GetPGVariable() in tcop/*.
These don't actually do anything for the moment, but should
be enough to implement the SET var_name TO var_val in the
parser?
SetPGVariable() expects just two strings, the var_name and
the var_value from above, and is expected to do the right thing.
Returns TRUE if everything okay.
From: "Martin J. Laubach" <mjl@wwx.vip.at>
of common routines in pqcomprim.c (pq communication primitives).
Not all adapted to it yet, but it's a start.
- Rewritten some of those routines, to write/read bigger chunks of
data, precomputing stuff in buffers instead of sending out byte
by byte.
- As a consequence, I need to know the endianness of the machine.
Currently I rely on getting it from machine/endian.h, but this
may not be available everywhere? (Who the hell thought it was
a good idea to pass integers to the backend the other way around
than the normal network byte order? *argl*)
- Libpq looks in the environment for magic variables, and upon
establishing a connection to the backend, sends it queries
of the form "SET var_name TO 'var_value'". This needs a change
in the backend parser (Mr. Parser, are you there? :)
- Currently it looks for two Env-Vars, namely PG_DATEFORMAT
and PG_FLOATFORMAT. What else makes sense? PG_TIMEFORMAT?
PG_TIMEZONE?
From: "Martin J. Laubach" <mjl@wwx.vip.at>
Subject: [HACKERS] Patch for io routines
I am currently trying to improve on the front-backend communication
routines; and noticed that lots of code are duplicated for libpq and
the backend. This is a first patch that tries to share code between
the two, more to follow.
mjl
Subject: [HACKERS] password authentication
This patch adds support for plaintext password authentication. To use
it, you add a line like
host all 0.0.0.0 0.0.0.0 password pg_pwd.conf
to your pg_hba.conf, where 'pg_pwd.conf' is the name of a file containing
the usernames and password hashes in the format of the first two fields
of a Unix /etc/passwd file. (Of course, you can use a specific database
name or IP instead.)
Then, to connect with a password through libpq, you use the PQconnectdb()
function, specifying the "password=" tag in the connect string and also
adding the tag "authtype=password".
I also added a command-line switch '-u' to psql that tells it to prompt
for a username and password and use password authentication.
#if defined(aix)
#define TERMIOS_H_LOCATION <termios.h>
#else
#define TERMIOS_H_LOCATION <sys/termios.h>
#endif
libpq/fe-exec.c modified so that location of termios.h is determined
by whether HAVE_TERMIOS_H is defined or not, in preparation for switch
to configure
Hi,
counting the empty dummy queries in libpq isn't everything.
If the backend sends an error, the I returns from the dummies
still come. So we must eat them up in any case, not just
returning on the occurence of an E reply.
Until later, Jan
gmake of the code without interruption.
There's also some tidy-up of the MAXPATHLEN stuff based on the assumption that
all supported platforms have MAXPATHLEN defined in <sys/param.h>.
(The only unknowns for the above are AIX and IRIX5.)
PQexec handles the possibility of multiple results from one
query by simply submitting an empty query after the first
result and waiting for an 'I' message.
Rules can generate errors with transaction abort after the
first 'C' message was recieved (e.g. if a C-language function
used in a rule calls elog(WARN, ...)). Thus we have to look
for.
Jan(wieck@sapserv.debis.de)
In particular, no more compiled-in default for PGDATA or LIBDIR. Commands
that need them need either invocation options or environment variables.
PGPORT default is hardcoded as 5432, but overrideable with options or
environment variables.
following is the patch to libpq's large object interface that
removes the requirement to include fmgr.h into fe-lobj.c.
The large object interface now ask's the backend to tell the
OID's of all the required functions in pg_proc.
From: wieck@sapserv.debis.de (Jan Wieck)
Bruce Momjian
Tom Lane
Tatsuo Ishii
Marc G. Fournier
Thomas G. Lockhart
Vadim B. Mikheev
Bryan Henderson