use these instead of its previous hack of changing pg_class.reltriggers.
Documentation is lacking, will add that later.
Patch by Satoshi Nagayasu, review and some extra work by Tom Lane.
after the fact. Fix bug with incorrect test for whether we are at end
of logfile segment. Arrange for writes triggered by XLogInsert's
is-cache-more-than-half-full test to synchronize with the cache boundaries,
so that in long transactions we tend to write alternating halves of the
cache rather than randomly chosen portions of it; this saves one more
write syscall per cache load.
erroring out as it has done for the last couple weeks. Document that this
form is now ignored because indexes can't usefully have different owners
from their parent tables. Fix pg_dump to not generate ALTER OWNER commands
for indexes.
discussion of getting around this by relaxing the checks made for regular
users, but I'm disinclined to toy with the security model right now,
so just special-case it for superusers where needed.
not accepting queries).
errmsg("database is not accepting queries to avoid
wraparound data loss in database \"%s\"",
errhint("Stop the postmaster and use a standalone
backend to VACUUM database \"%s\".",
in postgresql.conf.sample, mark custom_variable_classes as SIGHUP not
POSTMASTER to agree with the documentation (I can't see a reason it has
to be POSTMASTER so I think the docs are right).
to 'Size' (that is, size_t), and install overflow detection checks in it.
This allows us to remove the former arbitrary restrictions on NBuffers
etc. It won't make any difference in a 32-bit machine, but in a 64-bit
machine you could theoretically have terabytes of shared buffers.
(How efficiently we could manage 'em remains to be seen.) Similarly,
num_temp_buffers, work_mem, and maintenance_work_mem can be set above
2Gb on a 64-bit machine. Original patch from Koichi Suzuki, additional
work by moi.
insufficient paranoia in code that follows t_ctid links. (We must do both
because even with VACUUM doing it properly, the intermediate state with
a dangling t_ctid link is visible concurrently during lazy VACUUM, and
could be seen afterwards if either type of VACUUM crashes partway through.)
Also try to improve documentation about what's going on. Patch is a bit
bulky because passing the XMAX information around required changing the
APIs of some low-level heapam.c routines, but it's not conceptually very
complicated. Per trouble report from Teodor and subsequent analysis.
This needs to be back-patched, but I'll do that after 8.1 beta is out.
or OFFSET clauses by using estimate_expression_value(). The main advantage
of this is that if the expression is a Param and we have a value for the
Param, we'll use that value rather than defaulting. Also, fix some
thinkos in the logic for combining LIMIT/OFFSET with an externally
supplied tuple fraction (this covers cases like EXISTS(...LIMIT...)).
And make sure the results of all this are shown by EXPLAIN. Per a
gripe from Merlin Moncure.
Fix to_char(interval) to return large year/month/day/hour values that
are larger than possible timestamp values.
Prevent to_char(interval) format specifications that make no sense, like
Month.
Clean up formatting.c code to more logically handle return lengths.
their OID parameter. It was possible to crash the backend with
select array_in('{123}',0,0); because that would bypass the needed step
of initializing the workspace. These seem to be the only two places
with a problem, though (record_in and record_recv don't have the issue,
and the other array functions aren't depending on user-supplied input).
Back-patch as far as 7.4; 7.3 does not have the bug.
(the stats system has always collected this info, but the views were
filtering it out). Modify autovacuum so that over-threshold activity
in a toast table can trigger a VACUUM of the parent table, even if the
parent didn't appear to need vacuuming itself. Per discussion a month
or so back about "short, wide tables".
SearchCatCacheList and ReleaseCatCacheList. Previously, we incremented
and decremented the refcounts of list member tuples along with the list
itself, but that's unnecessary, and very expensive when the list is big.
It's cheaper to change only the list refcount. When we are considering
deleting a cache entry, we have to check not only its own refcount but
its parent list's ... but it's easy to arrange the code so that this
check is not made in any commonly-used paths, so the cost is really nil.
The bigger gain though is to refrain from DLMoveToFront'ing each individual
member tuple each time the list is referenced. To keep some semblance
of fair space management, lists are just marked as used or not since the
last cache cleanout search, and we do a MoveToFront pass only when about
to run a cleanout. In combination, these changes reduce the costs of
SearchCatCacheList and ReleaseCatCacheList from about 4.5% of pgbench
runtime to under 1%, according to my gprof results.
remember the output parameter set for himself. It's a bit of a kluge
but fixing array_in to work in bootstrap mode looks worse.
I removed the separate pg_file_length() function, as it no longer has any
real notational advantage --- you can write (pg_stat_file(...)).length.
stderr-in-service or output-from-syslogger-in-service code. Previously
everything was flagged as ERRORs there, which caused all instances to
log "LOG: logger shutting down" as error...
Please apply for 8.1. I'd also like it considered for 8.0 since logging
non-errors as errors can be cause for alarm amongst people who actually
look at their logs...
Magnus Hagander
> >> 3) I restarted the postmaster both times. I got this error
> both times.
> >> :25: ERROR: could not load library "C:/Program
> >> Files/PostgreSQL/8.0/lib/testtrigfuncs.dll": dynamic load error
>
> > Yes. We really need to look at fixing that error message. I had
> > forgotten it completely :-(
>
> > Bruce, you think we can sneak that in after feature freeze? I would
> > call it a bugfix :-)
>
> Me too. That's been on the radar for awhile --- please do
> send in a patch.
Here we go, that wasn't too hard :-)
Apart from adding the error handling, it does one more thing: it changes
the errormode when loading the DLLs. Previously if a DLL was broken, or
referenced other DLLs that couldn't be found, a popup dialog box would
appear on the screen. Which had to be clicked before the backend could
continue. This patch also disables the popup error message for DLL
loads.
I think this is something we should consider doing for the entire
backend - disable those popups, and say we deal with it ourselves. What
do you other win32 hackers thinnk about this?
In the meantime, this patch fixes the error msgs. Please apply for 8.1
and please consider a backpatch to 8.0.
Magnus Hagander
> > I ran across this yesterday on HEAD:
>
> > template1=# grant select on foo, foo to swm;
> > ERROR: tuple already updated by self
>
> Seems to fail similarly in every version back to 7.2; probably further,
> but that's all I have running at the moment.
>
> > We could do away with the error by producing a unique list of object names
> > -- but that would impose an extra cost on the common case.
>
> CommandCounterIncrement in the GRANT loop would be easier, likely.
> I'm having a hard time getting excited about it though...
Yeah, its not that exciting but that error message would throw your
average user.
I've attached a patch which calls CommandCounterIncrement() in each of the
grant loops.
Gavin Sherry
should surely be timestamptz not timestamp; fix some but not all of the
holes in check_and_make_absolute(); other minor cleanup. Also put in
the missed catversion bump.
computation. On modern machines this is as fast if not faster, and we
don't have to clog the CPU's L2 cache with a tens-of-KB pointer array.
If we ever decide to adopt a more dynamic allocation method for shared
buffers, we'll probably have to revert this patch, but in the meantime
we might as well save a few bytes and nanoseconds. Per Qingqing Zhou.
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
delay and limit, both as global GUCs and as table-specific entries in
pg_autovacuum. stats_reset_on_server_start is now OFF by default,
but a reset is forced if we did WAL replay. XID-wrap vacuums do not
ANALYZE, but do FREEZE if it's a template database. Alvaro Herrera
against the PGPROC array. Anything in the file that isn't in PGPROC
gets rejected as being a stale entry. This should solve complaints about
stale entries in pg_stat_activity after a BETERM message has been dropped
due to overload.
ResourceOwner mechanism already released all reference counts for the
cache entries; therefore, we do not need to scan the catcache or relcache
at transaction end, unless we want to do it as a debugging crosscheck.
Do the crosscheck only in Assert mode. This is the same logic we had
previously installed in AtEOXact_Buffers to avoid overhead with large
numbers of shared buffers. I thought it'd be a good idea to do it here
too, in view of Kari Lavikka's recent report showing a real-world case
where AtEOXact_CatCache is taking a significant fraction of runtime.
exit, instead of trying to take shortcuts. Introduce some additional
shutdown callback routines to eliminate kluges like having ProcKill
be responsible for shutting down the buffer manager. Ensure that the
order of operations during shutdown is predictable and what you would
expect given the module layering.
max_files_per_process. Going further than that is just a waste of
cycles, and it seems that current Cygwin does not cope gracefully
with deliberately running the system out of FDs. Per Andrew Dunstan.
character, tighten the inner loops of CopyReadLine and CopyReadAttribute,
arrange to parse out all the attributes of a line in just one call instead
of one CopyReadAttribute call per attribute, be smarter about which client
encodings require slow pg_encoding_mblen() loops. Also, clean up the
mishmash of static variables and overly-long parameter lists in favor of
passing around a single CopyState struct containing all the state data.
Original patch by Alon Goldshuv, reworked by Tom Lane.
This was not especially critical before, but it is now that we track
ownership dependencies --- the dependency for the rowtype *must* shift
to the new owner. Spotted by Bernd Helmle.
Also fix a problem introduced by recent change to allow non-superusers
to do ALTER OWNER in some cases: if the table had a toast table, ALTER
OWNER failed *even for superusers*, because the test being applied would
conclude that the new would-be owner had no create rights on pg_toast.
A side-effect of the fix is to disallow changing the ownership of indexes
or toast tables separately from their parent table, which seems a good
idea on the whole.
doesn't block the bgwriter from making progress writing out other buffers.
This was a hard problem in the context of the ARC/2Q design, but it's
trivial in the context of clock sweep ... just advance the sweep counter
before we try to write not after.
of special case for Windows port. Put a PG_TRY around most of createdb()
to ensure that we remove copied subdirectories on failure, even if the
failure happens while creating the pg_database row. (I think this explains
Oliver Siegmar's recent report.) Having done that, there's no need for
the fragile assumption that copydir() mustn't ereport(ERROR), so simplify
its API. Eliminate the old code that used system("cp ...") to copy
subdirectories, in favor of using copydir() on all platforms. This not
only should allow much better error reporting, but allows us to fsync
the created files before trusting that the copy has succeeded.
continue to recurse after eliminating a NOT-below-a-NOT, since the
contained subexpression will now be part of the top-level AND/OR structure
and so deserves to be simplified. The real-world impact of this is
probably minimal, since it'd require at least three levels of NOT to make
a difference, but it's still a bug.
Also remove some redundant tests for NULL subexpressions.
track shared relations in a separate hashtable, so that operations done
from different databases are counted correctly. Add proper support for
anti-XID-wraparound vacuuming, even in databases that are never connected
to and so have no stats entries. Miscellaneous other bug fixes.
Alvaro Herrera, some additional fixes by Tom Lane.
Also, write multiple WAL buffers out in one write() operation.
ITAGAKI Takahiro
---------------------------------------------------------------------------
> If we disable writeback-cache and use open_sync, the per-page writing
> behavior in WAL module will show up as bad result. O_DIRECT is similar
> to O_DSYNC (at least on linux), so that the benefit of it will disappear
> behind the slow disk revolution.
>
> In the current source, WAL is written as:
> for (i = 0; i < N; i++) { write(&buffers[i], BLCKSZ); }
> Is this intentional? Can we rewrite it as follows?
> write(&buffers[0], N * BLCKSZ);
>
> In order to achieve it, I wrote a 'gather-write' patch (xlog.gw.diff).
> Aside from this, I'll also send the fixed direct io patch (xlog.dio.diff).
> These two patches are independent, so they can be applied either or both.
>
>
> I tested them on my machine and the results as follows. It shows that
> direct-io and gather-write is the best choice when writeback-cache is off.
> Are these two patches worth trying if they are used together?
>
>
> | writeback | fsync= | fdata | open_ | fsync_ | open_
> patch | cache | false | sync | sync | direct | direct
> ------------+-----------+--------+-------+-------+--------+---------
> direct io | off | 124.2 | 105.7 | 48.3 | 48.3 | 48.2
> direct io | on | 129.1 | 112.3 | 114.1 | 142.9 | 144.5
> gather-write| off | 124.3 | 108.7 | 105.4 | (N/A) | (N/A)
> both | off | 131.5 | 115.5 | 114.4 | 145.4 | 145.2
>
> - 20runs * pgbench -s 100 -c 50 -t 200
> - with tuning (wal_buffers=64, commit_delay=500, checkpoint_segments=8)
> - using 2 ATA disks:
> - hda(reiserfs) includes system and wal.
> - hdc(jfs) includes database files. writeback-cache is always on.
>
> ---
> ITAGAKI Takahiro
An attached patch is a small additional improvement.
This patch use appendStringInfoText instead of appendStringInfoString.
There is an overhead of PG_TEXT_GET_STR when appendStringInfoString is
executed by text type. This can be reduced by appendStringInfoText.
Atsushi Ogawa
planning logic for bitmap indexscans. Partial indexes create corner
cases in which a scan might be done with no explicit index qual conditions,
and the code wasn't handling those cases nicely. Also be a little
tenser about eliminating redundant clauses in the generated plan.
Per report from Dmitry Karasik.
to the "text" segment. It would be possible to mark the elements of the
array "const" as well, but this would require multiple API changes and
does not seem to be worth the notational inconvenience.
into .def and .exp files automatically on Windows, AIX, and the like.
An additional benefit is that changes in libpgport files correctly
propagate to force rebuild of the backend executable. This is my
reworking of Rocco Altier's idea, and if it breaks anything it's
definitely my fault.
doesn't automatically inherit the privileges of roles it is a member of;
for such a role, membership in another role can be exploited only by doing
explicit SET ROLE. The default inherit setting is TRUE, so by default
the behavior doesn't change, but creating a user with NOINHERIT gives closer
adherence to our current reading of SQL99. Documentation still lacking,
and I think the information schema needs another look.
existing ones for object privileges. Update the information_schema for
roles --- pg_has_role() makes this a whole lot easier, removing the need
for most of the explicit joins with pg_user. The views should be a tad
faster now, too. Stephen Frost and Tom Lane.
pg_strcasecmp and pg_strncasecmp ... but I see some of the former have
crept back in.
Eternal vigilance is the price of locale independence, apparently.
near daylight savings time boudaries. This handles it properly, e.g.
test=> select '2005-04-03 04:00:00'::timestamp at time zone
'America/Los_Angeles';
timezone
------------------------
2005-04-03 07:00:00-04
(1 row)
test=> select (CURRENT_DATE + '05:00'::time)::timestamp at time zone
'Canada/Pacific';
timezone
------------------------
2005-07-22 08:00:00-04
(1 row)
test=> select ('2005-07-20 00:00:00'::timestamp without time zone) at
time zone 'Europe/Paris';
timezone
------------------------
2005-07-19 22:00:00-04
Udpate documentation.
coding would ignore startup cost differences of less than 1% of the
estimated total cost; which was OK for normal planning but highly not OK
if a very small LIMIT was applied afterwards, so that startup cost becomes
the name of the game. Instead, compare startup and total costs fuzzily
but independently. This changes the plan selected for two queries in the
regression tests; adjust expected-output files for resulting changes in
row order. Per reports from Dawid Kuroczko and Sam Mason.
24 hours. This is very helpful for daylight savings time:
select '2005-05-03 00:00:00 EST'::timestamp with time zone + '24 hours';
?column?
----------------------
2005-05-04 01:00:00-04
select '2005-05-03 00:00:00 EST'::timestamp with time zone + '1 day';
?column?
----------------------
2005-05-04 01:00:00-04
Michael Glaesemann
test=> select '4 months'::interval / 5;
?column?
---------------
1 mon -6 days
(1 row)
after:
test=> select '4 months'::interval / 5;
?column?
----------
24 days
(1 row)
The problem was the use of rint() to round, and then find the remainder,
causing the negative values.
output targetlist of the Unique or HashAgg plan. This code was OK when
written, but subsequent changes to use "physical tlists" where possible
had broken it: given an input subplan that has extra variables added to
avoid a projection step, it would copy those extra variables into the
upper tlist, which is pointless since a projection has to happen anyway.
I have seen this case in CVS tip due to new "physical tlist" optimization
for subqueries. I believe it probably can't happen in existing releases,
but the check is not going to hurt anything, so backpatch to 8.0 just
in case.
cases: we can't just consider whether the subquery's output is unique on its
own terms, we have to check whether the set of output columns we are going to
use will be unique. Per complaint from Luca Pireddu and test case from
Michael Fuhr.
requiring superuserness always, allow an owner to reassign ownership
to any role he is a member of, if that role would have the right to
create a similar object. These three requirements essentially state
that the would-be alterer has enough privilege to DROP the existing
object and then re-CREATE it as the new role; so we might as well
let him do it in one step. The ALTER TABLESPACE case is a bit
squirrely, but the whole concept of non-superuser tablespace owners
is pretty dubious anyway. Stephen Frost, code review by Tom Lane.
optional arguments as text input functions, ie, typioparam OID and
atttypmod. Make all the datatypes that use typmod enforce it the same
way in typreceive as they do in typinput. This fixes a problem with
failure to enforce length restrictions during COPY FROM BINARY.
The specification of this function is as follows.
regexp_replace(source text, pattern text, replacement text, [flags
text])
returns text
Replace string that matches to regular expression in source text to
replacement text.
- pattern is regular expression pattern.
- replacement is replace string that can use '\1'-'\9', and '\&'.
'\1'-'\9': back reference to the n'th subexpression.
'\&' : entire matched string.
- flags can use the following values:
g: global (replace all)
i: ignore case
When the flags is not specified, case sensitive, replace the first
instance only.
Atsushi Ogawa
XLOG_DBASE_DROP_OLD WAL records -- these records are no longer created in
current sources. Adjust numbering of XLOG_DBASE_CREATE and XLOG_DBASE_DROP
and bump the catversion. Patch from Gavin Sherry, adjusted by Neil Conway.
have adequate mechanisms for tracking the contents of databases and
tablespaces). This solves the longstanding problem that you can drop a
user who still owns objects and/or has access permissions.
Alvaro Herrera, with some kibitzing from Tom Lane.
The content of the patch is as follows:
(1)Create shortcut when subtext was not found.
(2)Stop using LEFT and RIGHT macro.
In LEFT and RIGHT macro, TEXTPOS is executed by the same content as
execution immediately before. The execution frequency of TEXTPOS can be
reduced by using text_substring instead of LEFT and RIGHT macro.
(3)Add appendStringInfoText, and use it instead of
appendStringInfoString.
There is an overhead of PG_TEXT_GET_STR when appendStringInfoString is
executed by text type. This can be reduced by appendStringInfoText.
(4)Reduce execution of TEXTDUP.
The effect of the patch that I measured is as follows:
- The Data for test was created by 'pgbench -i'.
- Test SQL:
select replace(aid, '9', 'A') from accounts;
- Test results: Linux(CPU: Pentium III, Compiler option: -O2)
original: 1.515s
patched: 1.250s
Atsushi Ogawa
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
able to do this before, but I had tried to make an exception for functions
with OUT parameters. Michael Fuhr found one problem with it already, and
I found another, which was it didn't work for strict functions with a
NULL input. While both of these could be worked around, the probability
that there are more gotchas seems high; I think prudence dictates just
reverting to the former behavior for now. Accordingly, remove the kluge
added to get_expr_result_type() for Michael's case.
propagated inside an outer join. In particular, given
LEFT JOIN ON (A = B) WHERE A = constant, we cannot conclude that
B = constant at the top level (B might be null instead), but we
can nonetheless put a restriction B = constant into the quals for
B's relation, since no inner-side rows not meeting that condition
can contribute to the final result. Similarly, given
FULL JOIN USING (J) WHERE J = constant, we can't directly conclude
that either input J variable = constant, but it's OK to push such
quals into each input rel. Per recent gripe from Kim Bisgaard.
Along the way, remove 'valid_everywhere' flag from RestrictInfo,
as on closer analysis it was not being used for anything, and was
defined backwards anyway.
basic regression tests for GiST to the standard regression tests.
I took the opportunity to add an rtree-equivalent gist opclass for
circles; the contrib version only covered boxes and polygons, but
indexing circles is very handy for distance searches.
