near daylight savings time boudaries. This handles it properly, e.g.
test=> select '2005-04-03 04:00:00'::timestamp at time zone
'America/Los_Angeles';
timezone
------------------------
2005-04-03 07:00:00-04
(1 row)
test=> select (CURRENT_DATE + '05:00'::time)::timestamp at time zone
'Canada/Pacific';
timezone
------------------------
2005-07-22 08:00:00-04
(1 row)
test=> select ('2005-07-20 00:00:00'::timestamp without time zone) at
time zone 'Europe/Paris';
timezone
------------------------
2005-07-19 22:00:00-04
Udpate documentation.
coding would ignore startup cost differences of less than 1% of the
estimated total cost; which was OK for normal planning but highly not OK
if a very small LIMIT was applied afterwards, so that startup cost becomes
the name of the game. Instead, compare startup and total costs fuzzily
but independently. This changes the plan selected for two queries in the
regression tests; adjust expected-output files for resulting changes in
row order. Per reports from Dawid Kuroczko and Sam Mason.
24 hours. This is very helpful for daylight savings time:
select '2005-05-03 00:00:00 EST'::timestamp with time zone + '24 hours';
?column?
----------------------
2005-05-04 01:00:00-04
select '2005-05-03 00:00:00 EST'::timestamp with time zone + '1 day';
?column?
----------------------
2005-05-04 01:00:00-04
Michael Glaesemann
test=> select '4 months'::interval / 5;
?column?
---------------
1 mon -6 days
(1 row)
after:
test=> select '4 months'::interval / 5;
?column?
----------
24 days
(1 row)
The problem was the use of rint() to round, and then find the remainder,
causing the negative values.
output targetlist of the Unique or HashAgg plan. This code was OK when
written, but subsequent changes to use "physical tlists" where possible
had broken it: given an input subplan that has extra variables added to
avoid a projection step, it would copy those extra variables into the
upper tlist, which is pointless since a projection has to happen anyway.
I have seen this case in CVS tip due to new "physical tlist" optimization
for subqueries. I believe it probably can't happen in existing releases,
but the check is not going to hurt anything, so backpatch to 8.0 just
in case.
cases: we can't just consider whether the subquery's output is unique on its
own terms, we have to check whether the set of output columns we are going to
use will be unique. Per complaint from Luca Pireddu and test case from
Michael Fuhr.
requiring superuserness always, allow an owner to reassign ownership
to any role he is a member of, if that role would have the right to
create a similar object. These three requirements essentially state
that the would-be alterer has enough privilege to DROP the existing
object and then re-CREATE it as the new role; so we might as well
let him do it in one step. The ALTER TABLESPACE case is a bit
squirrely, but the whole concept of non-superuser tablespace owners
is pretty dubious anyway. Stephen Frost, code review by Tom Lane.
optional arguments as text input functions, ie, typioparam OID and
atttypmod. Make all the datatypes that use typmod enforce it the same
way in typreceive as they do in typinput. This fixes a problem with
failure to enforce length restrictions during COPY FROM BINARY.
The specification of this function is as follows.
regexp_replace(source text, pattern text, replacement text, [flags
text])
returns text
Replace string that matches to regular expression in source text to
replacement text.
- pattern is regular expression pattern.
- replacement is replace string that can use '\1'-'\9', and '\&'.
'\1'-'\9': back reference to the n'th subexpression.
'\&' : entire matched string.
- flags can use the following values:
g: global (replace all)
i: ignore case
When the flags is not specified, case sensitive, replace the first
instance only.
Atsushi Ogawa
XLOG_DBASE_DROP_OLD WAL records -- these records are no longer created in
current sources. Adjust numbering of XLOG_DBASE_CREATE and XLOG_DBASE_DROP
and bump the catversion. Patch from Gavin Sherry, adjusted by Neil Conway.
have adequate mechanisms for tracking the contents of databases and
tablespaces). This solves the longstanding problem that you can drop a
user who still owns objects and/or has access permissions.
Alvaro Herrera, with some kibitzing from Tom Lane.
The content of the patch is as follows:
(1)Create shortcut when subtext was not found.
(2)Stop using LEFT and RIGHT macro.
In LEFT and RIGHT macro, TEXTPOS is executed by the same content as
execution immediately before. The execution frequency of TEXTPOS can be
reduced by using text_substring instead of LEFT and RIGHT macro.
(3)Add appendStringInfoText, and use it instead of
appendStringInfoString.
There is an overhead of PG_TEXT_GET_STR when appendStringInfoString is
executed by text type. This can be reduced by appendStringInfoText.
(4)Reduce execution of TEXTDUP.
The effect of the patch that I measured is as follows:
- The Data for test was created by 'pgbench -i'.
- Test SQL:
select replace(aid, '9', 'A') from accounts;
- Test results: Linux(CPU: Pentium III, Compiler option: -O2)
original: 1.515s
patched: 1.250s
Atsushi Ogawa
chdir into PGDATA and subsequently use relative paths instead of absolute
paths to access all files under PGDATA. This seems to give a small
performance improvement, and it should make the system more robust
against naive DBAs doing things like moving a database directory that
has a live postmaster in it. Per recent discussion.
able to do this before, but I had tried to make an exception for functions
with OUT parameters. Michael Fuhr found one problem with it already, and
I found another, which was it didn't work for strict functions with a
NULL input. While both of these could be worked around, the probability
that there are more gotchas seems high; I think prudence dictates just
reverting to the former behavior for now. Accordingly, remove the kluge
added to get_expr_result_type() for Michael's case.
propagated inside an outer join. In particular, given
LEFT JOIN ON (A = B) WHERE A = constant, we cannot conclude that
B = constant at the top level (B might be null instead), but we
can nonetheless put a restriction B = constant into the quals for
B's relation, since no inner-side rows not meeting that condition
can contribute to the final result. Similarly, given
FULL JOIN USING (J) WHERE J = constant, we can't directly conclude
that either input J variable = constant, but it's OK to push such
quals into each input rel. Per recent gripe from Kim Bisgaard.
Along the way, remove 'valid_everywhere' flag from RestrictInfo,
as on closer analysis it was not being used for anything, and was
defined backwards anyway.
basic regression tests for GiST to the standard regression tests.
I took the opportunity to add an rtree-equivalent gist opclass for
circles; the contrib version only covered boxes and polygons, but
indexing circles is very handy for distance searches.
the difference between checkpoints forced due to WAL segment consumption
and checkpoints forced for other reasons (such as CREATE DATABASE). Avoid
generating 'checkpoints are occurring too frequently' messages when the
checkpoint wasn't caused by WAL segment consumption. Per gripe from
Chris K-L.
current time: provide a GetCurrentTimestamp() function that returns
current time in the form of a TimestampTz, instead of separate time_t
and microseconds fields. This is what all the callers really want
anyway, and it eliminates low-level dependencies on AbsoluteTime,
which is a deprecated datatype that will have to disappear eventually.
role memberships; make superuser/createrole distinction do something
useful; fix some locking and CommandCounterIncrement issues; prevent
creation of loops in the membership graph.
syntactic conflicts, both privilege and role GRANT/REVOKE commands have
to use the same production for scanning the list of tokens that might
eventually turn out to be privileges or role names. So, change the
existing GRANT/REVOKE code to expect a list of strings not pre-reduced
AclMode values. Fix a couple other minor issues while at it, such as
InitializeAcl function name conflicting with a Windows system function.
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
- full concurrency for insert/update/select/vacuum:
- select and vacuum never locks more than one page simultaneously
- select (gettuple) hasn't any lock across it's calls
- insert never locks more than two page simultaneously:
- during search of leaf to insert it locks only one page
simultaneously
- while walk upward to the root it locked only parent (may be
non-direct parent) and child. One of them X-lock, another may
be S- or X-lock
- 'vacuum full' locks index
- improve gistgetmulti
- simplify XLOG records
Fix bug in index_beginscan_internal: LockRelation may clean
rd_aminfo structure, so move GET_REL_PROCEDURE after LockRelation
with a table that has a small predicted size. Avoids wasting several
hundred K on the timezone hash table, which is likely to have only one
or a few entries, but the entries use up 10Kb apiece ...
with main, avoid using a SQL-defined SQLSTATE for what is most definitely
not a SQL-compatible error condition, fix documentation omissions,
adhere to message style guidelines, don't use two GUC_REPORT variables
when one is sufficient. Nothing done about pg_dump issues.
literally.
Add GUC variables:
"escape_string_warning" - warn about backslashes in non-E strings
"escape_string_syntax" - supports E'' syntax?
"standard_compliant_strings" - treats backslashes literally in ''
Update code to use E'' when escapes are used.
should fix the recent reports of "index is not a btree" failures,
as well as preventing a more obscure race condition involving changes
to a template database just after copying it with CREATE DATABASE.
to the existing X-direction tests. An rtree class now includes 4 actual
2-D tests, 4 1-D X-direction tests, and 4 1-D Y-direction tests.
This involved adding four new Y-direction test operators for each of
box and polygon; I followed the PostGIS project's lead as to the names
of these operators.
NON BACKWARDS COMPATIBLE CHANGE: the poly_overleft (&<) and poly_overright
(&>) operators now have semantics comparable to box_overleft and box_overright.
This is necessary to make r-tree indexes work correctly on polygons.
Also, I changed circle_left and circle_right to agree with box_left and
box_right --- formerly they allowed the boundaries to touch. This isn't
actually essential given the lack of any r-tree opclass for circles, but
it seems best to sync all the definitions while we are at it.
CURRENT_TIME, and LOCALTIME: now they just produce "timestamptz" not
"timestamptz(6)", etc. This makes the behavior more consistent with our
choice to not assign a specific default precision to column datatypes.
It should also save a few cycles at runtime due to not having to invoke
the round-to-given-precision functions.
I also took the opportunity to translate CURRENT_TIMESTAMP into "now()"
instead of an invocation of the timestamptz input converter --- this should
save a few cycles too.
polygon operators (<<, &<, >>, &>). Per ideas originally put forward
by andrew@supernews and later rediscovered by moi. This patch just
fixes the existing opclasses, and does not add any new behavior as I
proposed earlier; that can be sorted out later. In principle this
could be back-patched, since it changes only search behavior and not
system catalog entries nor rtree index contents. I'm not currently
planning to do that, though, since I think it could use more testing.
in the database. The old behavior (reindex system catalogs only) is now
available as REINDEX SYSTEM. I did not add the complementary REINDEX USER
case since there did not seem to be consensus for this, but it would be
trivial to add later. Per recent discussions.
argument list contains parameter symbols ($n) declared as type VOID,
discard these arguments. This allows the driver to avoid renumbering
mixed IN and OUT argument placeholders (the JDBC syntax involves writing
? for both IN and OUT parameters, but on the server side we don't think
that OUT parameters are arguments). This doesn't break any currently-
useful cases since VOID is not used as an input argument type.
is redundant after a check has already been made for "num < 0". The "set"
variable can also be removed, as it is now no longer used. Per checking
with Karel, this is the right fix.
Per Coverity static analysis performed by EnterpriseDB.
unlike template0 and template1 does not have any special status in
terms of backend functionality. However, all external utilities such
as createuser and createdb now connect to "postgres" instead of
template1, and the documentation is changed to encourage people to use
"postgres" instead of template1 as a play area. This should fix some
longstanding gotchas involving unexpected propagation of database
objects by createdb (when you used template1 without understanding
the implications), as well as ameliorating the problem that CREATE
DATABASE is unhappy if anyone else is connected to template1.
Patch by Dave Page, minor editing by Tom Lane. All per recent
pghackers discussions.
malformed ident map file. This was introduced by the linked list
rewrite in 8.0 -- mea maxima culpa.
Per Coverity static analysis performed by EnterpriseDB.
only used in one branch of an if statement, so we can move its
declaration to that block. This also avoids an unnecessary syscache
lookup.
Per Coverity static analysis performed by EnterpriseDB.
(due to the preceding strlen(), for example), so we needn't recheck this
before invoking pg_mbcliplen().
Per Coverity static analysis performed by EnterpriseDB.
(a/k/a SELECT INTO). Instead, flush and fsync the whole relation before
committing. We do still need the WAL log when PITR is active, however.
Simon Riggs and Tom Lane.
2. improve vacuum for gist
- use FSM
- full vacuum:
- reforms parent tuple if it's needed
( tuples was deleted on child page or parent tuple remains invalid
after crash recovery )
- truncate index file if possible
3. fixes bugs and mistakes
scankeys arrays that it needs can never have more than INDEX_MAX_KEYS
entries, so it's reasonable to just allocate them as fixed-size local
arrays, and save the cost of palloc/pfree. Not a huge savings, but
a cycle saved is a cycle earned ...
includes error checking and an appropriate ereport(ERROR) message.
This gets rid of rather tedious and error-prone manipulation of errno,
as well as a Windows-specific bug workaround, at more than a dozen
call sites. After an idea in a recent patch by Heikki Linnakangas.
given reasonably short lifespans for prepared transactions, this should
mean that only a small minority of state files ever need to be fsynced
at all. Per discussion with Heikki Linnakangas.
not memcpy() to copy the offered key into the hash table during HASH_ENTER.
This avoids possible core dump if the passed key is located very near the
end of memory. Per report from Stefan Kaltenbrunner.
old suggestion by Oliver Jowett. Also, add a transaction column to the
pg_locks view to show the xid of each transaction holding or awaiting
locks; this allows prepared transactions to be properly associated with
the locks they own. There was already a column named 'transaction',
and I chose to rename it to 'transactionid' --- since this column is
new in the current devel cycle there should be no backwards compatibility
issue to worry about.
work if either of the join relations are empty. The logic is:
(1) if the inner relation's startup cost is less than the outer
relation's startup cost and this is not an outer join, read
a single tuple from the inner relation via ExecHash()
- if NULL, we're done
(2) read a single tuple from the outer relation
- if NULL, we're done
(3) build the hash table on the inner relation
- if hash table is empty and this is not an outer join,
we're done
(4) otherwise, do hash join as usual
The implementation uses the new MultiExecProcNode API, per a
suggestion from Tom: invoking ExecHash() now produces the first
tuple from the Hash node's child node, whereas MultiExecHash()
builds the hash table.
I had to put in a bit of a kludge to get the row count returned
for EXPLAIN ANALYZE to be correct: since ExecHash() is invoked to
return a tuple, and then MultiExecHash() is invoked, we would
return one too many tuples to EXPLAIN ANALYZE. I hacked around
this by just manually detecting this situation and subtracting 1
from the EXPLAIN ANALYZE row count.
"AT TIME ZONE", and not just the shorlist previously available. For
example:
SELECT CURRENT_TIMESTAMP AT TIME ZONE 'Europe/London';
works fine now. It will also obey whatever DST rules were in effect at
just that date, which the previous implementation did not.
It also supports the AT TIME ZONE on the timetz datatype. The whole
handling of DST is a bit bogus there, so I chose to make it use whatever
DST rules are in effect at the time of executig the query. not sure if
anybody is actuallyi *using* timetz though, it seems pretty
unpredictable just because of this...
Magnus Hagander
it is sufficient to track whether a backend holds a lock or not, and
store information about transaction vs. session locks only in the
inside-the-backend LocalLockTable. Since there can now be but one
PROCLOCK per lock per backend, LockCountMyLocks() is no longer needed,
thus eliminating some O(N^2) behavior when a backend holds many locks.
Also simplify the LockAcquire/LockRelease API by passing just a
'sessionLock' boolean instead of a transaction ID. The previous API
was designed with the idea that per-transaction lock holding would be
important for subtransactions, but now that we have subtransactions we
know that this is unwanted. While at it, add an 'isTempObject' parameter
to LockAcquire to indicate whether the lock is being taken on a temp
table. This is not used just yet, but will be needed shortly for
two-phase commit.
part of service principal. If not set, any service principal matching
an entry in the keytab can be used.
NEW KERBEROS MATCHING BEHAVIOR FOR 8.1.
Todd Kover
if geqo_rand() returns exactly 1.0, resulting in failure due to indexing
off the end of the pool array. Also, since this is using inexact float math,
it seems wise to guard against roundoff error producing values slightly
outside the expected range. Per report from bug@zedware.org.
constraint while determining whether the index sort order matches the
query's ORDER BY. This for example allows an index on (x,y) to match
... WHERE x = 42 ORDER BY y;
It only works for btree indexes, but since those are the only ones we
currently have that are ordered at all, that's good enough for now.
Per popular demand.
nonconsecutive columns of a multicolumn index, as per discussion around
mid-May (pghackers thread "Best way to scan on-disk bitmaps"). This
turns out to require only minimal changes in btree, and so far as I can
see none at all in GiST. btcostestimate did need some work, but its
original assumption that index selectivity == heap selectivity was
quite bogus even before this.
a descriptor that uses the current transaction snapshot, rather than
SnapshotNow as it did before (and still does if INV_WRITE is set).
This means pg_dump will now dump a consistent snapshot of large object
contents, as it never could do before. Also, add a lo_create() function
that is similar to lo_creat() but allows the desired OID of the large
object to be specified. This will simplify pg_restore considerably
(but I'll fix that in a separate commit).
These contain the SQLSTATE and error message of the current exception,
respectively. They are scope-local variables that are only defined
in exception handlers (so attempting to reference them outside an
exception handler is an error). Update the regression tests and the
documentation.
Also, do some minor related cleanup: export an unpack_sql_state()
function from the backend and use it to unpack a SQLSTATE into a
string, and add a free_var() function to pl_exec.c
Original patch from Pavel Stehule, review by Neil Conway.
to a subquery if the outer query is simple enough that the LIMIT can
be reflected directly to the subquery. This didn't use to be very
interesting, because a subquery that couldn't have been flattened into
the upper query was usually not going to be very responsive to
tuple_fraction anyway. But with new code that allows UNION ALL subqueries
to pay attention to tuple_fraction, this is useful to do. In particular
this lets the optimization occur when the UNION ALL is directly inside
a view.
if the limit were directly applied to it. This does not actually
add a LIMIT plan node to the generated subqueries --- that would be
useless overhead --- but it does cause the planner to prefer fast-
start plans when the limit is small. After an idea from Phil Endecott.
this in turn causes CREATE TABLE AS in plpgsql to set ROW_COUNT.
This is how it behaved before 7.4; I had unintentionally changed the
behavior in a bit of sloppy micro-optimization.
of a relation in a flat 'joininfo' list. The former arrangement grouped
the join clauses according to the set of unjoined relids used in each;
however, profiling on test cases involving lots of joins proves that
that data structure is a net loss. It takes more time to group the
join clauses together than is saved by avoiding duplicate tests later.
It doesn't help any that there are usually not more than one or two
clauses per group ...
as well as the existing pg_catalog entries for prefix and postfix %.
These have never been documented, though they did appear in one old
regression test. This avoids surprising behavior in cases like
"SELECT -25 % -10". Per recent discussion.
Note: although there is a catalog change here, I did not force initdb
since there's no harm in leaving the inaccessible entries in one's
copy of pg_operator.
transaction IDs, rather than like subtrans; in particular, the information
now survives a database restart. Per previous discussion, this is
essential for PITR log shipping and for 2PC.
last nextval() or setval() performed by the current session. Update the
docs, add regression tests, and bump the catalog version. Patch from
Dennis Björklund, various improvements by Neil Conway.
---------------------------------------------------------------------------
While playing around, I got the following error message:
--
FATAL: pre-existing shared memory block (key 5432001, ID 90898435) is
still in use
HINT: If you're sure there are no old server processes still running,
remove the shared memory block with the command "ipcrm", or just delete
the file "/home/hlinnaka/pgsql/data/postmaster.pid".
---
Thats normal because I used "kill -9 postmaster" to shut down.
The hint advises me to use "ipcrm", but there's the "ipcclean" script in
bin for just this purpose. The hint should probably advise to use
ipcclean.
The attached patch replaces all occurances of "ipcrm" with "ipcclean" in
src/backend/utils/init/miscinit.c and all the translations in
src/backend/po.
While reviewing the patch, I noticed a likely typo in hr.po. While I
don't
speak Croatian, the translation seems to advise to use the "icpm(1)"
command. I changed that to "ipcclean" too.
Heikki Linnakangas
up have the standard layout with unused space between pd_lower and pd_upper.
When this is set, XLogInsert will omit the unused space without bothering
to scan it to see if it's zero. That saves time in XLogInsert, and also
allows reversion of my earlier patch to make PageRepairFragmentation et al
explicitly re-zero freed space. Per suggestion by Heikki Linnakangas.
other_rel_list with a single array indexed by rangetable index.
This reduces find_base_rel from O(N) to O(1) without any real penalty.
While find_base_rel isn't one of the major bottlenecks in any profile
I've seen so far, it was starting to creep up on the radar screen
for complex queries --- so might as well fix it.
a new PlannerInfo struct, which is passed around instead of the bare
Query in all the planning code. This commit is essentially just a
code-beautification exercise, but it does open the door to making
larger changes to the planner data structures without having to muck
with the widely-known Query struct.
representation as the jointree) with two lists of RTEs, one showing
the RTEs accessible by qualified names, and the other showing the RTEs
accessible by unqualified names. I think this is conceptually simpler
than what we did before, and it's sure a whole lot easier to search.
This seems to eliminate the parse-time bottleneck for deeply nested
JOIN structures that was exhibited by phil@vodafone.
---------------------------------------------------------------------------
Tom Lane <tgl@sss.pgh.pa.us> writes:
> a_ogawa <a_ogawa@hi-ho.ne.jp> writes:
> > It is a reasonable idea. However, the majority part of MemSet was not
> > able to be avoided by this idea. Because the per-tuple contexts are used
> > at the early stage of executor.
>
> Drat. Well, what about changing that? We could introduce additional
> contexts or change the startup behavior so that the ones that are
> frequently reset don't have any data in them unless you are working
> with pass-by-ref values inside the inner loop.
That might be possible. However, I think that we should change only
aset.c about this article.
I thought further: We can check whether context was used from the last
reset even when blocks list is not empty. Please see attached patch.
postgresql.conf.
---------------------------------------------------------------------------
Here's an updated version of the patch, with the following changes:
1) No longer uses "service name" as "application version". It's instead
hardcoded as "postgres". It could be argued that this part should be
backpatched to 8.0, but it doesn't make a big difference until you can
start changing it with GUC / connection parameters. This change only
affects kerberos 5, not 4.
2) Now downcases kerberos usernames when the client is running on win32.
3) Adds guc option for "krb_caseins_users" to make the server ignore
case mismatch which is required by some KDCs such as Active Directory.
Off by default, per discussion with Tom. This change only affects
kerberos 5, not 4.
4) Updated so it doesn't conflict with the rendevouz/bonjour patch
already in ;-)
Magnus Hagander
> a_ogawa <a_ogawa@hi-ho.ne.jp> writes:
> > It is a reasonable idea. However, the majority part of MemSet was not
> > able to be avoided by this idea. Because the per-tuple contexts are used
> > at the early stage of executor.
>
> Drat. Well, what about changing that? We could introduce additional
> contexts or change the startup behavior so that the ones that are
> frequently reset don't have any data in them unless you are working
> with pass-by-ref values inside the inner loop.
That might be possible. However, I think that we should change only
aset.c about this article.
I thought further: We can check whether context was used from the last
reset even when blocks list is not empty. Please see attached patch.
The effect of the patch that I measured is as follows:
o Execution time that executed the SQL ten times.
(1)Linux(CPU: Pentium III, Compiler option: -O2)
- original: 24.960s
- patched : 23.114s
(2)Linux(CPU: Pentium 4, Compiler option: -O2)
- original: 8.730s
- patched : 7.962s
(3)Solaris(CPU: Ultra SPARC III, Compiler option: -O2)
- original: 37.0s
- patched : 33.7s
Atsushi Ogawa (a_ogawa)
RTE of interest, rather than the whole rangetable list. This makes
the API more understandable and avoids duplicate RTE lookups. This
patch reverts no-longer-needed portions of my patch of 2004-08-19.
performance problem pointed out by phil@vodafone: to wit, we were
spending O(N^2) time to check dropped-ness in an N-deep join tree,
even in the case where the tree was freshly constructed and couldn't
possibly mention any dropped columns. Instead of recursing in
get_rte_attribute_is_dropped(), change the data structure definition:
the joinaliasvars list of a JOIN RTE must have a NULL Const instead
of a Var at any position that references a now-dropped column. This
costs nothing during normal parse-rewrite-plan path, and instead we
have a linear-time update to make when loading a stored rule that
might contain now-dropped columns. While at it, move the responsibility
for acquring locks on relations referenced by rules into this separate
function (which I therefore chose to call AcquireRewriteLocks).
This saves effort --- namely, duplicated lock grabs in parser and rewriter
--- in the normal path at a cost of one extra non-locked heap_open()
in the stored-rule path; seems a good tradeoff. A fringe benefit is
that it is now *much* clearer that we acquire lock on relations referenced
in rules before we make any rewriter decisions based on their properties.
(I don't know of any bug of that ilk, but it wasn't exactly clear before.)
to just around the bare recv() call that gets a command from the client.
The former placement in PostgresMain was unsafe because the intermediate
processing layers (especially SSL) use facilities such as malloc that are
not necessarily re-entrant. Per report from counterstorm.com.
Instead of a separate CRC on each backup block, include backup blocks
in their parent WAL record's CRC; this is important to ensure that the
backup block really goes with the WAL record, ie there was not a page
tear right at the start of the backup block. Implement a simple form
of compression of backup blocks: drop any run of zeroes starting at
pd_lower, so as not to store the unused 'hole' that commonly exists in
PG heap and index pages. Tweak PageRepairFragmentation and related
routines to ensure they keep the unused space zeroed, so that the above
compression method remains effective. All per recent discussions.
and RelationNameGetTupleDesc() as deprecated; remove uses of the
latter in the contrib library. Along the way, clean up crosstab()
code and documentation a little.
key, compare the new and old row versions. If the foreign key column has
not changed, we needn't enqueue the trigger, since the update cannot
violate the foreign key. This optimization was previously applied in the
RI trigger function, but it is more efficient to avoid firing the trigger
altogether. Per recent discussion on pgsql-hackers.
Also add a regression test for some unintuitive foreign key behavior, and
refactor some code that deals with the OIDs of the various RI trigger
functions.
keys, rather than a single trigger for both events. This should not change
functionality, but it is more consistent: previously, there were trigger
functions for both "check_insert" and "check_update", but the former was
used for both events.
Bump catalog version number (not strictly necessary, but best to be
cautious).
would be evaluated only once anyway (ie, it's just a SELECT with no
FROM or an INSERT ... VALUES). The planner can't do it any faster than
the executor, so no point in an extra copying of the expression tree.
pg_class_aclmask(). We only need to do this when we have to check
pg_shadow.usecatupd, and that's not relevant unless the target table
is a system catalog. So we can usually avoid one syscache lookup.
are now reported via elog, eliminating the need to test the result code
at most call sites. Make it possible for the caller to distinguish a
freshly acquired lock from one already held in the current transaction.
Use that capability to avoid redundant AcceptInvalidationMessages() calls
in LockRelation().
status of the most recently queried userid. Since the common pattern is
many successive queries about the same user (ie, the current user) this
can save a lot of syscache probes.
were pretty expensive and I believe the case they were put in to
defend against can no longer arise, now that we have dependency checks
to prevent deletion of a type entry that is still referenced. Certainly
the example given in the CVS log entry can't happen anymore.
Since this was the only use of typeidIsValid(), remove the routine too.
to columns of an RTE that was a function returning RECORD with a column
definition list. Apparently no one has tried to use non-default typmod
with a function returning RECORD before.
spotted by Qingqing Zhou. The HASH_ENTER action now automatically
fails with elog(ERROR) on out-of-memory --- which incidentally lets
us eliminate duplicate error checks in quite a bunch of places. If
you really need the old return-NULL-on-out-of-memory behavior, you
can ask for HASH_ENTER_NULL. But there is now an Assert in that path
checking that you aren't hoping to get that behavior in a palloc-based
hash table.
Along the way, remove the old HASH_FIND_SAVE/HASH_REMOVE_SAVED actions,
which were not being used anywhere anymore, and were surely too ugly
and unsafe to want to see revived again.
hash table. This is a pretty unlikely scenario, since the table
should be tiny, but we can't guarantee continued correct operation
if it does occur. Spotted by Qingqing Zhou.
from a RECORD Const node, because that's what it may be faced with
after constant-folding of a function returning RECORD. Per example
from Michael Fuhr.
routines in the index's relcache entry, instead of doing a fresh fmgr_info
on every index access. We were already doing this for the index's opclass
support functions; not sure why we didn't think to do it for the AM
functions too. This supersedes the former method of caching (only)
amgettuple in indexscan scan descriptors; it's an improvement because the
function lookup can be amortized across multiple statements instead of
being repeated for each statement. Even though lookup for builtin
functions is pretty cheap, this seems to drop a percent or two off some
simple benchmarks.
Display only 9 not 10 digits of precision for timestamp values when
using non-integer timestamps. This prevents the display of rounding
errors for common values like days < 32.
working buffer into ParseDateTime() and reject too-long input there,
rather than checking the length of the input string before calling
ParseDateTime(). The old method was bogus because ParseDateTime() can use
a variable amount of working space, depending on the content of the
input string (e.g. how many fields need to be NUL terminated). This fixes
a minor stack overrun -- I don't _think_ it's exploitable, although I
won't claim to be an expert.
Along the way, fix a bug reported by Mark Dilger: the working buffer
allocated by interval_in() was too short, which resulted in rejecting
some perfectly valid interval input values. I added a regression test for
this fix.
scanner anyway) to avoid having any backup states. According to the
flex manual, this should speed things up, and indeed the backend scanner
is about a third faster according to some quick profiling checks.
I haven't tried to measure the speed change in psql, but it probably
is similar.
using pg_mblen. Therefore, pg_mblen is executed many times, and it
becomes a bottleneck.
This patch makes a short cut, and reduces execution frequency of
pg_mblen by comparing the first byte first.
a_ogawa
where there was also a WHERE-clause restriction that applied to the
join. The check on restrictlist == NIL is really unnecessary anyway,
because select_mergejoin_clauses already checked for and complained
about any unmergejoinable join clauses. So just take it out.
if they are two-byte multibyte characters. Same thing can be happen
if octet_length(multibyte_chars) == n where n is char(n).
Long standing bug since 7.3 days. Per report and fix from Yoshiyuki Asaba.
that we acquire a lock on relations added to the query due to inheritance.
Formerly, no such lock was held throughout planning, which meant that
a schema change could occur to invalidate the plan before it's even
been completed.
aren't doing anything useful (ie, neither selection nor projection).
Also, extend to SubqueryScan the hacks already in place to avoid
unnecessary ExecProject calls when the result would just be the same
tuple the subquery already delivered. This saves some overhead in
UNION and other set operations, as well as avoiding overhead for
unflatten-able subqueries. Per example from Sokolov Yura.
from Abhijit Menon-Sen, minor editorialization from Neil Conway. Also,
improve md5(text) to allocate a constant-sized buffer on the stack
rather than via palloc.
Catalog version bumped.
Also, remove the rather useless return value of LockReleaseAll. Change
response to detection of corruption in the shared lock tables to PANIC,
since that is the only way of cleaning up fully.
Originally an idea of Heikki Linnakangas, variously hacked on by
Alvaro Herrera and Tom Lane.
communication structure, and make it its own module with its own lock.
This should reduce contention at least a little, and it definitely makes
the code seem cleaner. Per my recent proposal.
external projects, we should be careful about what parts of the GiST
API are considered implementation details, and which are part of the
public API. Therefore, I've moved internal-only declarations into
gist_private.h -- future backward-incompatible changes to gist.h should
be made with care, to avoid needlessly breaking external GiST extensions.
Also did some related header cleanup: remove some unnecessary #includes
from gist.h, and remove some unused definitions: isAttByVal(), _gistdump(),
and GISTNStrategies.
- make sure we always invoke user-supplied GiST methods in a short-lived
memory context. This means the backend isn't exposed to any memory leaks
that be in those methods (in fact, it is probably a net loss for most
GiST methods to bother manually freeing memory now). This also means
we can do away with a lot of ugly manual memory management in the
GiST code itself.
- keep the current page of a GiST index scan pinned, rather than doing a
ReadBuffer() for each tuple produced by the scan. Since ReadBuffer() is
expensive, this is a perf. win
- implement dead tuple killing for GiST indexes (which is easy to do, now
that we keep a pin on the current scan page). Now all the builtin indexes
implement dead tuple killing.
- cleanup a lot of ugly code in GiST
than one heap page represented in the bitmap. This is a bit ugly but
it cuts overhead fairly effectively in simple join cases. Per example
from Sergey Koposov.
in an inconsistent state. (This is only latent because in reality
ExecSeqRestrPos is dead code at the moment ... but someday maybe it won't
be.) Add some comments about what the API for plan node mark/restore
actually is, because it's not immediately obvious.
when the blocks list is empty (there can surely be no freelist items if
the context contains no memory), and use MemSetAligned not MemSet to
clear the headers (we assume alignof(pointer) >= alignof(int32)).
Per discussion with Atsushi Ogawa. He proposes some further hacking
that I'm not yet sold on, but these two changes are unconditional wins
since there is no case in which they make things slower.
When one side of the join has a NULL, we don't want to uselessly try
to match it against every remaining tuple of the other side. While
at it, rewrite the comparison machinery to avoid multiple evaluations
of the left and right input expressions and to use a btree comparator
where available, instead of double operator calls. Also revise the
state machine to eliminate redundant comparisons and hopefully make it
more readable too.
AtCommit_Portals is restarted when a portal is deleted. This is
necessary since the deletion of a portal may cause the deletion of
another which on rare occations may cause the iterator to return a
deleted portal an thus a renewed attempt delete.
Thomas Hallgren
methods: they all invoke UpdateStats() since they have computed the
number of heap tuples, so I created a function in catalog/index.c that
each AM now calls.
collector messages, per recent discussion on pgsql-patches. This
actually required quite a few changes -- for example,
"databaseid != InvalidOid" was used to check whether a slot in the
backend entry table was initialized, but that no longer works since
the slot might be initialized prior to receiving the BESTART message
which contains the database id. We now use procpid > 0 to indicate
that a slot is non-empty.
Other changes:
- various comment improvements and cleanups
- there's no need to zero-out the entire activity buffer in
pgstat_add_backend(), we can just set activity[0] to '\0'.
- remove the counting of the # of connections to a database; this
was not used anywhere
One change in behavior I wasn't sure about: previously, the code
would create a hash table entry for a database as soon as any message
was received whose header referenced that database. Now, we only
create hash table entries as needed (so for example BESTART won't
create a database hash table entry, since it doesn't need to
access anything in the per-db hash table). It would be easy enough
to retain the old behavior, but AFAICS it is not required.
memset() or MemSet() to a char *. For one, memset()'s first argument is
a void *, and further void * can be implicitly coerced to/from any other
pointer type.
* Add session start time to pg_stat_activity
* Add the client IP address and port to pg_stat_activity
Original patch from Magnus Hagander, code review by Neil Conway. Catalog
version bumped. This patch sends the client IP address and port number in
every statistics message; that's not ideal, but will be fixed up shortly.
and VACUUM: in the interval between adding a new page to the relation
and formatting it, it was possible for VACUUM to come along and decide
it should format the page too. Though not harmful in itself, this would
cause data loss if a third transaction were able to insert tuples into
the vacuumed page before the original extender got control back.
before we check commit/abort status. Formerly this was done in some paths
but not all, with the result that a transaction might be considered
committed for some purposes before it became committed for others.
Per example found by Jan Wieck.
which is neither needed by nor related to that header. Remove the bogus
inclusion and instead include the header in those C files that actually
need it. Also fix unnecessary inclusions and bad inclusion order in
tsearch2 files.
associated with a hashtable is allocated in that hashtable's private
context, so that hash_destroy only has to destroy the context and not
do any retail pfree's; and tighten the inner loop of hash_seq_search.
startup to end, rather than re-opening it in each MultiExecBitmapIndexScan
call. I had foolishly thought that opening/closing wouldn't be much
more expensive than a rescan call, but that was sheer brain fade.
This seems to fix about half of the performance lossage reported by
Sergey Koposov. I'm still not sure where the other half went.
moment this has no particular use except to allow table rows to be
passed to record_out(), but that case seems to be useful in itself
per recent example from Elein. Further down the road we could look
at letting PL functions be declared to accept RECORD parameters.
Tom Lane
Bruce Momjian
Neil Conway
Teodor Sigaev
Peter Eisentraut
Tatsuo Ishii