I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
As implemented, -e ran an EXPLAIN but then discarded the output, which
certainly seems pointless. Make it print to stdout instead. It's been
like that forever, so back-patch to all supported branches.
Daniel Gustafsson, reviewed by Andreas Scherbaum
Patch: <B97BDCB7-A3B3-4734-90B5-EDD586941629@yesql.se>
In blinsert(), cope with the possibility that a page we pull from the
notFullPage list is marked BLOOM_DELETED. This could happen if VACUUM
recently marked it deleted but hasn't (yet) updated the metapage.
We can re-use such a page safely, but we *must* reinitialize it so that
it's no longer marked deleted.
Fix blvacuum() so that it updates the notFullPage list even if it's
going to update it to empty. The previous "optimization" of skipping
the update seems pretty dubious, since it means that the next blinsert()
will uselessly visit whatever pages we left in the list.
Uniformly treat PageIsNew pages the same as deleted pages. This should
allow proper recovery if a crash occurs just after relation extension.
Properly use vacuum_delay_point, not assorted ad-hoc CHECK_FOR_INTERRUPTS
calls, in the blvacuum() main loop.
Fix broken tuple-counting logic: blvacuum.c counted the number of live
index tuples over again in each scan, leading to VACUUM VERBOSE reporting
some multiple of the actual number of surviving index tuples after any
vacuum that removed any tuples (since they'd be counted in blvacuum, maybe
more than once, and then again in blvacuumcleanup, without ever zeroing the
counter). It's sufficient to count them in blvacuumcleanup.
stats->estimated_count is a boolean, not a counter, and we don't want
to set it true, so don't add tuple counts to it.
Add a couple of Asserts that we don't overrun available space on a bloom
page. I don't think there's any bug there today, but the way the
FreeBlockNumberArray size calculation is set up is scarily fragile, and
BloomPageGetFreeSpace isn't much better. The Asserts should help catch
any future mistakes.
Per investigation of a report from Jeff Janes. I think the first item
above may explain his report; the other changes were things I noticed
while casting about for an explanation.
Report: <CAMkU=1xEUuBphDwDmB1WjN4+td4kpnEniFaTBxnk1xzHCw8_OQ@mail.gmail.com>
Per discussion, we should provide such functions to replace the lost
ability to discover AM properties by inspecting pg_am (cf commit
65c5fcd35). The added functionality is also meant to displace any code
that was looking directly at pg_index.indoption, since we'd rather not
believe that the bit meanings in that field are part of any client API
contract.
As future-proofing, define the SQL API to not assume that properties that
are currently AM-wide or index-wide will remain so unless they logically
must be; instead, expose them only when inquiring about a specific index
or even specific index column. Also provide the ability for an index
AM to override the behavior.
In passing, document pg_am.amtype, overlooked in commit 473b93287.
Andrew Gierth, with kibitzing by me and others
Discussion: <87mvl5on7n.fsf@news-spur.riddles.org.uk>
This oversight could cause logical decoding to fail to decode an outer
transaction containing changes, if a subtransaction had an XID but no
actual changes. Per bug #14279 from Marko Tiikkaja. Patch by Marko
based on analysis by Andrew Gierth.
Discussion: <20160804191757.1430.39011@wrigleys.postgresql.org>
Commits 4452000f3 et al established semantics for NullTest.argisrow that
are a bit different from its initial conception: rather than being merely
a cache of whether we've determined the input to have composite type,
the flag now has the further meaning that we should apply field-by-field
testing as per the standard's definition of IS [NOT] NULL. If argisrow
is false and yet the input has composite type, the construct instead has
the semantics of IS [NOT] DISTINCT FROM NULL. Update the comments in
primnodes.h to clarify this, and fix ruleutils.c and deparse.c to print
such cases correctly. In the case of ruleutils.c, this merely results in
cosmetic changes in EXPLAIN output, since the case can't currently arise
in stored rules. However, it represents a live bug for deparse.c, which
would formerly have sent a remote query that had semantics different
from the local behavior. (From the user's standpoint, this means that
testing a remote nested-composite column for null-ness could have had
unexpected recursive behavior much like that fixed in 4452000f3.)
In a related but somewhat independent fix, make plancat.c set argisrow
to false in all NullTest expressions constructed to represent "attnotnull"
constructs. Since attnotnull is actually enforced as a simple null-value
check, this is a more accurate representation of the semantics; we were
previously overpromising what it meant for composite columns, which might
possibly lead to incorrect planner optimizations. (It seems that what the
SQL spec expects a NOT NULL constraint to mean is an IS NOT NULL test, so
arguably we are violating the spec and should fix attnotnull to do the
other thing. If we ever do, this part should get reverted.)
Back-patch, same as the previous commit.
Discussion: <10682.1469566308@sss.pgh.pa.us>
That script is incorrect in that it sets the combine function for
max(citext) twice instead of setting the combine function for
max(citext) once and the combine functon for min(citext) once. The
consequence is that if you install 1.0 or 1.1 and then update to 1.2,
you end up with min(citext) not having a combine function, contrary to
what was intended. If you install 1.2 directly, you're OK.
Fix things up by defining a new 1.3 version. Upgrading from 1.2 to
1.3 won't change anything for people who first installed the 1.2
version, but people upgrading from 1.0 or 1.1 will get the right
catalog contents once they reach 1.3.
Report and patch by David Rowley, reviewed by Andreas Karlsson.
In btree_gin and citext, avoid some not-particularly-interesting
dependencies on the sorting of 'aa'. In tsearch2, use COLLATE "C" to
remove an uninteresting dependency on locale sort order (and thereby
allow removal of a variant expected-file).
Also, in citext, avoid assuming that lower('I') = 'i'. This isn't relevant
to Danish but it does fail in Turkish.
To ensure that "make installcheck" can be used safely against an existing
installation, we need to be careful about what global object names
(database, role, and tablespace names) we use; otherwise we might
accidentally clobber important objects. There's been a weak consensus that
test databases should have names including "regression", and that test role
names should start with "regress_", but we didn't have any particular rule
about tablespace names; and neither of the other rules was followed with
any consistency either.
This commit moves us a long way towards having a hard-and-fast rule that
regression test databases must have names including "regression", and that
test role and tablespace names must start with "regress_". It's not
completely there because I did not touch some test cases in rolenames.sql
that test creation of special role names like "session_user". That will
require some rethinking of exactly what we want to test, whereas the intent
of this patch is just to hit all the cases in which the needed renamings
are cosmetic.
There is no enforcement mechanism in this patch either, but if we don't
add one we can expect that the tests will soon be violating the convention
again. Again, that's not such a cosmetic change and it will require
discussion. (But I did use a quick-hack enforcement patch to find these
cases.)
Discussion: <16638.1468620817@sss.pgh.pa.us>
The old code used SEQ_MINVALUE to get the smallest int64 value. This
was done as a convenience to avoid having to deal with INT64_IS_BUSTED,
but that is obsolete now. Also, it is incorrect because the smallest
int64 value is actually SEQ_MINVALUE-1. Fix by using PG_INT64_MIN.
We must not push down a foreign join when the foreign tables involved
should be accessed under different user mappings. Previously we tried
to enforce that rule literally during planning, but that meant that the
resulting plans were dependent on the current contents of the
pg_user_mapping catalog, and we had to blow away all cached plans
containing any remote join when anything at all changed in pg_user_mapping.
This could have been improved somewhat, but the fact that a syscache inval
callback has very limited info about what changed made it hard to do better
within that design. Instead, let's change the planner to not consider user
mappings per se, but to allow a foreign join if both RTEs have the same
checkAsUser value. If they do, then they necessarily will use the same
user mapping at runtime, and we don't need to know specifically which one
that is. Post-plan-time changes in pg_user_mapping no longer require any
plan invalidation.
This rule does give up some optimization ability, to wit where two foreign
table references come from views with different owners or one's from a view
and one's directly in the query, but nonetheless the same user mapping
would have applied. We'll sacrifice the first case, but to not regress
more than we have to in the second case, allow a foreign join involving
both zero and nonzero checkAsUser values if the nonzero one is the same as
the prevailing effective userID. In that case, mark the plan as only
runnable by that userID.
The plancache code already had a notion of plans being userID-specific,
in order to support RLS. It was a little confused though, in particular
lacking clarity of thought as to whether it was the rewritten query or just
the finished plan that's dependent on the userID. Rearrange that code so
that it's clearer what depends on which, and so that the same logic applies
to both RLS-injected role dependency and foreign-join-injected role
dependency.
Note that this patch doesn't remove the other issue mentioned in the
original complaint, which is that while we'll reliably stop using a foreign
join if it's disallowed in a new context, we might fail to start using a
foreign join if it's now allowed, but we previously created a generic
cached plan that didn't use one. It was agreed that the chance of winning
that way was not high enough to justify the much larger number of plan
invalidations that would have to occur if we tried to cause it to happen.
In passing, clean up randomly-varying spelling of EXPLAIN commands in
postgres_fdw.sql, and fix a COSTS ON example that had been allowed to
leak into the committed tests.
This reverts most of commits fbe5a3fb7 and 5d4171d1c, which were the
previous attempt at ensuring we wouldn't push down foreign joins that
span permissions contexts.
Etsuro Fujita and Tom Lane
Discussion: <d49c1e5b-f059-20f4-c132-e9752ee0113e@lab.ntt.co.jp>
This is fallout from join pushdown; get_relid_attribute_name can't
handle an attribute number of 0, indicating a whole-row reference,
and shouldn't be called in that case.
Etsuro Fujita, reviewed by Ashutosh Bapat
As pointed out by Ashutosh Bapat, the header comments for this file
say that schema-qualification is needed for all and only those types
outside pg_catalog. pg_catalog.text is not outside pg_catalog.
After pg_upgrade, it is possible that some tuples' Xmax have multixacts
corresponding to the old installation; such multixacts cannot have
running members anymore. In many code sites we already know not to read
them and clobber them silently, but at least when VACUUM tries to freeze
a multixact or determine whether one needs freezing, there's an attempt
to resolve it to its member transactions by calling GetMultiXactIdMembers,
and if the multixact value is "in the future" with regards to the
current valid multixact range, an error like this is raised:
ERROR: MultiXactId 123 has not been created yet -- apparent wraparound
and vacuuming fails. Per discussion with Andrew Gierth, it is completely
bogus to try to resolve multixacts coming from before a pg_upgrade,
regardless of where they stand with regards to the current valid
multixact range.
It's possible to get from under this problem by doing SELECT FOR UPDATE
of the problem tuples, but if tables are large, this is slow and
tedious, so a more thorough solution is desirable.
To fix, we realize that multixacts in xmax created in 9.2 and previous
have a specific bit pattern that is never used in 9.3 and later (we
already knew this, per comments and infomask tests sprinkled in various
places, but we weren't leveraging this knowledge appropriately).
Whenever the infomask of the tuple matches that bit pattern, we just
ignore the multixact completely as if Xmax wasn't set; or, in the case
of tuple freezing, we act as if an unwanted value is set and clobber it
without decoding. This guarantees that no errors will be raised, and
that the values will be progressively removed until all tables are
clean. Most callers of GetMultiXactIdMembers are patched to recognize
directly that the value is a removable "empty" multixact and avoid
calling GetMultiXactIdMembers altogether.
To avoid changing the signature of GetMultiXactIdMembers() in back
branches, we keep the "allow_old" boolean flag but rename it to
"from_pgupgrade"; if the flag is true, we always return an empty set
instead of looking up the multixact. (I suppose we could remove the
argument in the master branch, but I chose not to do so in this commit).
This was broken all along, but the error-facing message appeared first
because of commit 8e9a16ab8f and was partially fixed in a25c2b7c4d.
This fix, backpatched all the way back to 9.3, goes approximately in the
same direction as a25c2b7c4d but should cover all cases.
Bug analysis by Andrew Gierth and Álvaro Herrera.
A number of public reports match this bug:
https://www.postgresql.org/message-id/20140330040029.GY4582@tamriel.snowman.nethttps://www.postgresql.org/message-id/538F3D70.6080902@publicrelay.comhttps://www.postgresql.org/message-id/556439CF.7070109@pscs.co.ukhttps://www.postgresql.org/message-id/SG2PR06MB0760098A111C88E31BD4D96FB3540@SG2PR06MB0760.apcprd06.prod.outlook.comhttps://www.postgresql.org/message-id/20160615203829.5798.4594@wrigleys.postgresql.org
something.* IS NOT NULL means that every attribute of the row is not
NULL, not that the row itself is non-NULL (e.g. because it's coming
from below an outer join. Use (somevar.*)::pg_catalog.text IS NOT
NULL instead.
Ashutosh Bapat, per a report by Rushabh Lathia. Reviewed by
Amit Langote and Etsuro Fujita. Schema-qualification added by me.
There was some very strange code here, dating to commit b525bf77, that
purported to work around an ancient gcc bug by forcing a float4 comparison
to be done as int instead. Commit 5871b8848 broke that when it changed
one side of the comparison to "double" but left the comparison code alone.
Commit f576b17cd doubled down on the weirdness by introducing a "volatile"
marker, which had nothing to do with the actual problem.
Guess that the gcc bug, even if it's still present in the wild, was
triggered by comparison of float4's and can be avoided if we store the
result of cnt_sml() into a double before comparing to the double "nlimit".
This will at least work correctly on non-broken compilers, and it's way
more readable.
Per bug #14202 from Greg Navis. Add a regression test based on his
example.
Report: <20160620115321.5792.10766@wrigleys.postgresql.org>
As shown by buildfarm reports, dblink_build_sql_insert and
dblink_build_sql_update are *not* parallel safe, because they
may attempt to access temporary tables of the local session.
Although dblink_build_sql_delete doesn't actually touch the
contents of the referenced table, it seems consistent and prudent
to mark it PARALLEL RESTRICTED too.
This requires some core changes as well so that we can properly
WAL-log the truncation. Specifically, it changes the format of the
XLOG_SMGR_TRUNCATE WAL record, so bump XLOG_PAGE_MAGIC.
Patch by me, reviewed but not fully endorsed by Andres Freund.
Almost all functions provided by this extension are PARALLEL
RESTRICTED. Mostly, that's because the leader's TCP connections won't
be shared with the workers, but in some cases like dblink_get_pkey
it's because they obtain locks which might be released early if taken
within a parallel worker. dblink_fdw_validator probably can't be used
in a query anyway, but there would be no problem from the point of
view of parallel query if it were, so it's PARALLEL SAFE.
Andreas Karlsson
The new pg_check_visible() and pg_check_frozen() functions can be used to
verify that the visibility map bits for a relation's data pages match the
actual state of the tuples on those pages.
Amit Kapila and Robert Haas, reviewed (in earlier versions) by Andres
Freund. Additional testing help by Thomas Munro.
All functions provided by this extension are PARALLEL RESTRICTED,
because they provide information about the connection state. Parallel
workers don't have this information and therefore these functions
can't be executed in a worker (but they can be present in a query some
other part of which uses parallelism).
Andreas Karlsson
Commit 749a787c5b bumped the extension
version on all of these extensions already, and we haven't had a
release since then, so we can make further changes without bumping the
extension version again. Take this opportunity to mark all of the
functions exported by these modules PARALLEL SAFE -- except for
pg_trgm's set_limit(). Mark that one PARALLEL RESTRICTED, because it
makes a persistent change to a GUC value.
Note that some of the markings added by this commit don't have any
effect; for example, gseg_picksplit() isn't likely to be mentioned
explicitly in a query and therefore it's parallel-safety marking will
never be consulted. But this commit just marks everything for
consistency: if it were somehow used in a query, that would be fine as
far as parallel query is concerned, since it does not consult any
backend-private state, attempt to write data, etc.
Andreas Karlsson, with a few revisions by me.
As discovered by Andreas Seltenreich via sqlsmith, it's possible for a
remote join to need to generate a target list which contains a
PlaceHolderVar which would need to be evaluated on the remote server.
This happens when we try to push down a join tree which contains outer
joins and the nullable side of the join contains a subquery which
evauates some expression which can go to NULL above the level of the
join. Since the deparsing logic can't build a remote query that
involves subqueries, it fails while trying to produce an SQL query
that can be sent to the remote side. Detect such cases and don't try
to push down the join at all.
It's actually fine to push down the join if the PlaceHolderVar needs
to be evaluated at the current join level. This patch makes a small
change to build_tlist_to_deparse so that this case will work.
Amit Langote, Ashutosh Bapat, and me.
Extension scripts should never use CREATE OR REPLACE for initial object
creation. If there is a collision with a pre-existing (probably
user-created) object, we want extension installation to fail, not silently
overwrite the user's object. Bloom and sslinfo both violated this precept.
Also fix a number of scripts that had no standard header (the file name
comment and the \echo...\quit guard). Probably the \echo...\quit hack
is less important now than it was in 9.1 days, but that doesn't mean
that individual extensions get to choose whether to use it or not.
And fix a couple of evident copy-and-pasteos in file name comments.
No need for back-patch: the REPLACE bugs are both new in 9.6, and the
rest of this is pretty much cosmetic.
Andreas Karlsson and Tom Lane
Andreas Seltenreich reports that it is possible for a PlaceHolderVar
to creep into this tlist, and I fear that even after that's fixed we
might have other, similar bugs in this area either now or in the
future. There's a lot of action-at-a-distance here, because the
validity of this assertion depends on core planner behavior; so, let's
use elog() to make sure we catch this even in non-assert builds,
rather than just crashing.
All functions provided by this extension are PARALLEL SAFE. Given the
general prohibition against write operations in parallel queries, it is
perhaps a bit surprising that pg_stat_statements_reset() is parallel safe.
But since it only modifies shared memory, not the database, it's OK.
Andreas Karlsson
In commits 9ff60273e3 and dbe2328959 I (tgl) fixed the
signatures of a bunch of contrib's GIN and GIST support functions so that
they would pass validation by the recently-added amvalidate functions.
The backend does not actually consult or check those signatures otherwise,
so I figured this was basically cosmetic and did not require an extension
version bump. However, Alexander Korotkov pointed out that that would
leave us in a pretty messy situation if we ever wanted to redefine those
functions later, because there wouldn't be a unique way to name them.
Since we're going to be bumping these extensions' versions anyway for
parallel-query cleanups, let's take care of this now.
Andreas Karlsson, adjusted for more search-path-safety by me