truncating the table and transaction commit. This isn't really making
it safe, but at least there is no good reason to do free space map
cleanup within the risk window. Don't lock out cancel interrupts
until we have to, either.
being called as aggregates, and to get the aggregate transition state memory
context if needed. Use it instead of poking directly into AggState and
WindowAggState in places that shouldn't know so much.
We should have done this in 8.4, probably, but better late than never.
Revised version of a patch by Hitoshi Harada.
recovery. It's zeroed out whenever a checkpoint is written, so the only
scenario where the removed code did anything is when you kill archive
recovery, remove recovery.conf, and start up the server, so that it goes
into crash recovery instead. That's a "don't do that" scenario, but it
seems better to not clear minRecoveryPoint but instead update it like we
do in archive recovery, which is what will now happen.
needed by nothing else.
The restructuring I just finished doing on cache management exposed to me how
silly this routine was. Its function was to go into the catcache and blow
away all entries related to a given relation when there was a relcache flush
on that relation. However, there is no point in removing a catcache entry
if the catalog row it represents is still valid --- and if it isn't valid,
there must have been a catcache entry flush on it, because that's triggered
directly by heap_update or heap_delete on the catalog row. So this routine
accomplished nothing except to blow away valid cache entries that we'd very
likely be wanting in the near future to help reconstruct the relcache entry.
Dumb.
On top of which, it required a subtle and easy-to-get-wrong attribute in
syscache definitions, ie, the column containing the OID of the related
relation if any. Removing that is a very useful maintenance simplification.
VACUUM FULL INPLACE), along with a boatload of subsidiary code and complexity.
Per discussion, the use case for this method of vacuuming is no longer large
enough to justify maintaining it; not to mention that we don't wish to invest
the work that would be needed to make it play nicely with Hot Standby.
Aside from the code directly related to old-style VACUUM FULL, this commit
removes support for certain WAL record types that could only be generated
within VACUUM FULL, redirect-pointer removal in heap_page_prune, and
nontransactional generation of cache invalidation sinval messages (the last
being the sticking point for Hot Standby).
We still have to retain all code that copes with finding HEAP_MOVED_OFF and
HEAP_MOVED_IN flag bits on existing tuples. This can't be removed as long
as we want to support in-place update from pre-9.0 databases.
as per my recent proposal.
First, teach IndexBuildHeapScan to not wait for INSERT_IN_PROGRESS or
DELETE_IN_PROGRESS tuples to commit unless the index build is checking
uniqueness/exclusion constraints. If it isn't, there's no harm in just
indexing the in-doubt tuple.
Second, modify VACUUM FULL/CLUSTER to suppress reverifying
uniqueness/exclusion constraint properties while rebuilding indexes of
the target relation. This is reasonable because these commands aren't
meant to deal with corrupted-data situations. Constraint properties
will still be rechecked when an index is rebuilt by a REINDEX command.
This gets us out of the problem that new-style VACUUM FULL would often
wait for other transactions while holding exclusive lock on a system
catalog, leading to probable deadlock because those other transactions
need to look at the catalogs too. Although the real ultimate cause of
the problem is a debatable choice to release locks early after modifying
system catalogs, changing that choice would require pretty serious
analysis and is not something to be undertaken lightly or on a tight
schedule. The present patch fixes the problem in a fairly reasonable
way and should also improve the speed of VACUUM FULL/CLUSTER a little bit.
of shared or nailed system catalogs. This has two key benefits:
* The new CLUSTER-based VACUUM FULL can be applied safely to all catalogs.
* We no longer have to use an unsafe reindex-in-place approach for reindexing
shared catalogs.
CLUSTER on nailed catalogs now works too, although I left it disabled on
shared catalogs because the resulting pg_index.indisclustered update would
only be visible in one database.
Since reindexing shared system catalogs is now fully transactional and
crash-safe, the former special cases in REINDEX behavior have been removed;
shared catalogs are treated the same as non-shared.
This commit does not do anything about the recently-discussed problem of
deadlocks between VACUUM FULL/CLUSTER on a system catalog and other
concurrent queries; will address that in a separate patch. As a stopgap,
parallel_schedule has been tweaked to run vacuum.sql by itself, to avoid
such failures during the regression tests.
of old and new toast tables can be done either at the logical level (by
swapping the heaps' reltoastrelid links) or at the physical level (by swapping
the relfilenodes of the toast tables and their indexes). This is necessary
infrastructure for upcoming changes to support CLUSTER/VAC FULL on shared
system catalogs, where we cannot change reltoastrelid. The physical swap
saves a few catalog updates too.
We unfortunately have to keep the logical-level swap logic because in some
cases we will be adding or deleting a toast table, so there's no possibility
of a physical swap. However, that only happens as a consequence of schema
changes in the table, which we do not need to support for system catalogs,
so such cases aren't an obstacle for that.
In passing, refactor the cluster support functions a little bit to eliminate
unnecessarily-duplicated code; and fix the problem that while CLUSTER had
been taught to rename the final toast table at need, ALTER TABLE had not.
heap_sync() to the callers, because heap_sync() is sometimes called even
if the operation itself is WAL-logged. This eliminates the bogus unlogged
records from CLUSTER that Simon Riggs reported, patch by Fujii Masao.
the relfilenode of currently-not-relocatable system catalogs.
1. Get rid of inval.c's dependency on relfilenode, by not having it emit
smgr invalidations as a result of relcache flushes. Instead, smgr sinval
messages are sent directly from smgr.c when an actual relation delete or
truncate is done. This makes considerably more structural sense and allows
elimination of a large number of useless smgr inval messages that were
formerly sent even in cases where nothing was changing at the
physical-relation level. Note that this reintroduces the concept of
nontransactional inval messages, but that's okay --- because the messages
are sent by smgr.c, they will be sent in Hot Standby slaves, just from a
lower logical level than before.
2. Move setNewRelfilenode out of catalog/index.c, where it never logically
belonged, into relcache.c; which is a somewhat debatable choice as well but
better than before. (I considered catalog/storage.c, but that seemed too
low level.) Rename to RelationSetNewRelfilenode.
3. Cosmetic cleanups of some other relfilenode manipulations.
relations (they don't live in pg_toast). This caused an Assert failure in
assert-enabled builds. So far as I can see, in a non-assert build it would
only have messed up the checks for conflicting names, so a failure would be
quite improbable but perhaps not impossible.
All callers of FindConversionByName() already do suitable permissions
checking already apart from this function, but this is not just dead
code removal: the unnecessary permissions check can actually lead to
spurious failures - there's no reason why inability to execute the
underlying function should prohibit renaming the conversion, for example.
(The error messages in these cases were also rather poor:
FindConversion would return InvalidOid, eventually leading to a complaint
that the conversion "did not exist", which was not correct.)
KaiGai Kohei
When a column is renamed, we recursively rename the same column in
all descendent tables. But if one of those tables also inherits that
column from a table outside the inheritance hierarchy rooted at the
named table, we must throw an error. The previous coding correctly
prohibited the rename when the parent had inherited the column from
elsewhere, but overlooked the case where the parent was OK but a child
table also inherited the same column from a second, unrelated parent.
For now, not backpatched due to lack of complaints from the field.
KaiGai Kohei, with further changes by me.
Reviewed by Bernd Helme and Tom Lane.
We show the number of buckets, the number of batches (and also the original
number if it has changed), and the peak space used by the hash table. Minor
executor changes to track peak space used.
the input values into a string. The two argument version also does the same
thing, but inserts delimiters between elements.
Original patch by Pavel Stehule, reviewed by David E. Wheeler and me.
matching before recursing instead of after. The DFA match eliminates
unworkable midpoint choices a lot faster than the recursive check, in most
cases, so doing it first can speed things up; particularly in pathological
cases such as recently exhibited by Michael Glaesemann.
In addition, apply some cosmetic changes that were applied upstream (in the
Tcl project) at the same time, in order to sync with upstream version 1.15
of regexec.c.
Upstream apparently intends to backpatch this, so I will too. The
pathological behavior could be unpleasant if encountered in the field,
which seems to justify any risk of introducing new bugs.
Tom Lane, reviewed by Donal K. Fellows of Tcl project
stage of required deadlock detection to allow re-enabling max_standby_delay
setting of -1, which is now essential in the absence of improved relation-
specific conflict resoluton. Requested by Greg Stark et al.
We need to free the OID list returned by ExecInsertIndexTuples to avoid
a query-lifespan memory leak. When many rows require rechecking, this
can be a significant leak --- it's even more than the space used for the
queued trigger events.
Dean Rasheed
There was a race condition where the receiving pipe could be closed by the
child thread if the main thread was pre-empted before it got a chance to
create a new one, and the dispatch thread ran to completion during that time.
One symptom of this is that rows in pg_listener could be dropped under
heavy load.
Analysis and original patch by Radu Ilie, with some small
modifications by Magnus Hagander.
Since all current and foreseeable future command tags will be pure ASCII,
there is no need to do conversion on them. This saves a few cycles and also
avoids polluting otherwise-pristine subtransaction memory contexts, which
is the cause of the backend memory leak exhibited in bug #5302. (Someday
we'll probably want to have a better method of determining whether
subtransaction contexts need to be kept around, but today is not that day.)
Backpatch to 8.0. The cycle-shaving aspect of this would work in 7.4
too, but without subtransactions the memory-leak aspect doesn't apply,
so it doesn't seem worth touching 7.4.
false positives during Hot Standby conflict processing. Simple
patch to enhance conflict processing, following previous discussions.
Controlled by parameter minimize_standby_conflicts = on | off, with
default off allows measurement of performance impact to see whether
it should be set on all the time.
records for heap and btree. Minor change, mostly API changes to
pass through the required values. This is a simple change though
also provides the refactoring required for further enhancements
to conflict processing using the relOid. Changes only have effect
during Hot Standby.
LogwrtRqst.Write can be set to non-existent FF log segment, we mustn't
try to send that in XLogSend().
Also fix similar bug in ReadRecord(), which I just introduced in the
ReadRecord() refactoring patch.
restore_command, if the connection to the primary server is lost. This
ensures that the standby can recover automatically, if the connection is
lost for a long time and standby falls behind so much that the required
WAL segments have been archived and deleted in the master.
This also makes standby_mode useful without streaming replication; the
server will keep retrying restore_command every few seconds until the
trigger file is found. That's the same basic functionality pg_standby
offers, but without the bells and whistles.
To implement that, refactor the ReadRecord/FetchRecord functions. The
FetchRecord() function introduced in the original streaming replication
patch is removed, and all the retry logic is now in a new function called
XLogReadPage(). XLogReadPage() is now responsible for executing
restore_command, launching walreceiver, and waiting for new WAL to arrive
from primary, as required.
This also changes the life cycle of walreceiver. When launched, it now only
tries to connect to the master once, and exits if the connection fails, or
is lost during streaming for any reason. The startup process detects the
death, and re-launches walreceiver if necessary.
Heikki Linnakangas
Magnus Hagander
Tom Lane
Bruce Momjian
Robert Haas
Simon Riggs
Itagaki Takahiro
Peter Eisentraut