A cascaded drop might find independent reasons to drop both a table
and some column of the table (for instance, a schema drop might include
dropping a data type used in some table in the schema). Depending on
the order of visitation of pg_depend entries, we might report the
table column and the whole table as separate objects-to-be-dropped,
or we might only report the table. This is confusing and leads to
unstable regression test output, so fix it to report only the table
regardless of visitation order.
Per gripe from Peter Geoghegan. This is just cosmetic from a user's
standpoint, and we haven't actually seen regression test problems in
practice (yet), so I'll refrain from back-patching.
Discussion: https://postgr.es/m/15908.1547762076@sss.pgh.pa.us
AC_ARG_VAR is necessary if an environment variable influences a
configure result that is then used by other tests that are cached.
With AC_ARG_VAR, a change in the variable is detected on subsequent
configure runs and the user is then advised to remove the cache.
This adds AC_ARG_VAR calls for: MSGFMT, PERL, PYTHON, TCLSH, XML2_CONFIG
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/30672.1546816567@sss.pgh.pa.us
current_schema() gets called in the recently-added regression test from
c5660e0, and can be used in a parallel context, causing its call to fail
when creating a temporary schema.
Per buildfarm members crake and lapwing.
Discussion: https://postgr.es/m/20190118005949.GD1883@paquier.xyz
I've had enough of "fixing" this test case. Whatever value it has
is limited to verifying that pgbench fails for an unrecognized switch,
and we don't need to assume anything about what getopt_long prints in
order to do that.
Discussion: https://postgr.es/m/9427.1547701450@sss.pgh.pa.us
Attempting to use a temporary table within a two-phase transaction is
forbidden for ages. However, there have been uncovered grounds for
a couple of other object types and commands which work on temporary
objects with two-phase commit. In short, trying to create, lock or drop
an object on a temporary schema should not be authorized within a
two-phase transaction, as it would cause its state to create
dependencies with other sessions, causing all sorts of side effects with
the existing session or other sessions spawned later on trying to use
the same temporary schema name.
Regression tests are added to cover all the grounds found, the original
report mentioned function creation, but monitoring closer there are many
other patterns with LOCK, DROP or CREATE EXTENSION which are involved.
One of the symptoms resulting in combining both is that the session
which used the temporary schema is not able to shut down completely,
waiting for being able to drop the temporary schema, something that it
cannot complete because of the two-phase transaction involved with
temporary objects. In this case the client is able to disconnect but
the session remains alive on the backend-side, potentially blocking
connection backend slots from being used. Other problems reported could
also involve server crashes.
This is back-patched down to v10, which is where 9b013dc has introduced
MyXactFlags, something that this patch relies on.
Reported-by: Alexey Bashtanov
Author: Michael Paquier
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/5d910e2e-0db8-ec06-dd5f-baec420513c3@imap.cc
Backpatch-through: 10
Previously, parseCheckAggregates was run before
assign_query_collations, but this causes problems if any expression
has already had a collation assigned by some transform function (e.g.
transformCaseExpr) before parseCheckAggregates runs. The differing
collations would cause expressions not to be recognized as equal to
the ones in the GROUP BY clause, leading to spurious errors about
unaggregated column references.
The result was that CASE expr WHEN val ... would fail when "expr"
contained a GROUPING() expression or matched one of the group by
expressions, and where collatable types were involved; whereas the
supposedly identical CASE WHEN expr = val ... would succeed.
Backpatch all the way; this appears to have been wrong ever since
collations were introduced.
Per report from Guillaume Lelarge, analysis and patch by me.
Discussion: https://postgr.es/m/CAECtzeVSO_US8C2Khgfv54ZMUOBR4sWq+6_bLrETnWExHT=rFg@mail.gmail.com
Discussion: https://postgr.es/m/87muo0k0c7.fsf@news-spur.riddles.org.uk
postgresExecForeignInsert(), postgresExecForeignUpdate(), and
postgresExecForeignDelete() are coded almost identically, except that
postgresExecForeignInsert() does not need CTID. Extract that code into
a separate function and use it in all the three function implementations.
Author: Ashutosh Bapat
Reviewed-By: Michael Paquier
Discussion: https://postgr.es/m/CAFjFpRcz8yoY7cBTYofcrCLwjaDeCcGKyTUivUbRiA57y3v-bw%40mail.gmail.com
This is architecturally mildly problematic, which becomes more
pronounced with the upcoming introduction of pluggable storage.
To fix, teach heap_parallelscan_estimate() to deal with SnapshotAny
snapshots, and then use it from _bt_parallel_estimate_shared().
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
The parent of some WCO expressions was, apparently by accident, set to
the the source of DML queries, rather than the target table. This
causes problems for the upcoming pluggable storage work, because the
target and source table might be of different storage types.
It's possible that this is already problematic, but neither
experimenting nor inquiries on -hackers have found them. So don't
backpatch for now.
Author: Andres Freund
Discussion: https://postgr.es/m/20181205225213.hiwa3kgoxeybqcqv@alap3.anarazel.de
This reverts commit c203d6cf8 and some follow-on fixes, completing the
task begun in commit 5d28c9bd7. If that feature is ever resurrected,
the code will look quite a bit different from this, so it seems best
to start from a clean slate.
The v11 branch is not touched; in that branch, the recheck_on_update
storage option remains present, but nonfunctional and undocumented.
Discussion: https://postgr.es/m/20190114223409.3tcvejfhlvbucrv5@alap3.anarazel.de
This is the genam.h equivalent of 4c850ecec6 (which removed
heapam.h from a lot of other headers). There's still a few header
includes of genam.h, but not from central headers anymore.
As a few headers are not indirectly included anymore, execnodes.h and
relscan.h need a few additional includes. Some of the depended on
types were replacable by using the underlying structs, but e.g. for
Snapshot in execnodes.h that'd have gotten more invasive than
reasonable in this commit.
Like the aforementioned commit 4c850ecec6, this requires adding new
genam.h includes to a number of backend files, which likely is also
required in a few external projects.
Author: Andres Freund
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
We usually don't change the name of structs between the struct name
itself and the name of the typedef. Additionally, structs that are
usually used via a typedef that hides being a pointer, are commonly
suffixed Data. Change tupdesc code to follow those convention.
This is triggered by a future patch that intends to forward declare
TupleDescData in another header - keeping with the naming scheme makes
that easier to understand.
Author: Andres Freund
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
heapam.h previously was included in a number of widely used
headers (e.g. execnodes.h, indirectly in executor.h, ...). That's
problematic on its own, as heapam.h contains a lot of low-level
details that don't need to be exposed that widely, but becomes more
problematic with the upcoming introduction of pluggable table storage
- it seems inappropriate for heapam.h to be included that widely
afterwards.
heapam.h was largely only included in other headers to get the
HeapScanDesc typedef (which was defined in heapam.h, even though
HeapScanDescData is defined in relscan.h). The better solution here
seems to be to just use the underlying struct (forward declared where
necessary). Similar for BulkInsertState.
Another problem was that LockTupleMode was used in executor.h - parts
of the file tried to cope without heapam.h, but due to the fact that
it indirectly included it, several subsequent violations of that goal
were not not noticed. We could just reuse the approach of declaring
parameters as int, but it seems nicer to move LockTupleMode to
lockoptions.h - that's not a perfect location, but also doesn't seem
bad.
As a number of files relied on implicitly included heapam.h, a
significant number of files grew an explicit include. It's quite
probably that a few external projects will need to do the same.
Author: Andres Freund
Reviewed-By: Alvaro Herrera
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
These have been found while cross-checking for the use of unique words
in the documentation, and a wait event was not getting generated in a way
consistent to what the documentation provided.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/9b5a3a85-899a-ae62-dbab-1e7943aa5ab1@gmail.com
After 578b229718 / the removal of WITH OIDS support, older dump files
containing
SET default_with_oids = false;
either report unnecessary errors (as the subsequent tables have no
oids) or even fail to restore entirely (when using transaction mode).
To avoid that, re-add the GUC, but don't allow setting it to true.
Per complaint from Tom Lane.
Author: Amit Khandekar, editorialized by me
Discussion: https://postgr.es/m/CAJ3gD9dZyxrtL0rJfoNoOj6v7fJSDaXBngi9wy5XU8m-ioXhAA@mail.gmail.com
pg_ctl is supposed to daemonize the postmaster process, so that it's not
affected by signals to the launching process group. Before this patch, if
you had a shell script that used "pg_ctl start", and you interrupted the
shell script after postmaster had been launched, postmaster was also
killed. To fix, call setsid() after forking the postmaster process.
Long time ago, we had a 'silent_mode' option, which daemonized the
postmaster process by calling setsid(), but that was removed back in 2011
(commit f7ea6beaf4). We discussed bringing that back in some form, but
pg_ctl is the documented way of launching postmaster to the background, so
putting the setsid() call in pg_ctl itself seems appropriate.
Just putting postmaster in a separate session would change the behavior
when you interrupt "pg_ctl -w start", e.g. with CTRL-C, while it's waiting
for postmaster to start. The historical behavior has been that
interrupting pg_ctl aborts the server launch, which is handy if the server
is stuck in recovery, for example, and won't fully start up. To keep that
behavior, install a signal handler in pg_ctl, to explicitly kill
postmaster, if pg_ctl is interrupted while it's waiting for the server to
start up. This isn't 100% watertight, there is a small window after
forking the postmaster process, where the signal handler doesn't know the
postmaster's PID yet, but seems good enough.
Arguably this is a long-standing bug, but I refrained from back-batching,
out of fear of breaking someone's scripts that depended on the old
behavior.
Reviewed by Tom Lane. Report and original patch by Paul Guo, with
feedback from Michael Paquier.
Discussion: https://www.postgresql.org/message-id/CAEET0ZH5Bf7dhZB3mYy8zZQttJrdZg_0Wwaj0o1PuuBny1JkEw%40mail.gmail.com
If ctags (resp. etags) isn't installed, these scripts naturally fail,
but the error messages were less clear than one could wish.
It seems worth installing an explicit test to improve that.
Nikolay Shaplov, with suggestions from Michael Paquier and Andrew Dunstan
Discussion: https://postgr.es/m/2394207.ccz7JgCJsh@x200m
With the previous rule, if pandoc was missing, a zero-length output
file would be created without an error from make. To improve that,
write the rule as two separate commands without a pipe.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
If trying to use something else than a plain table as logical
replication target, a rather-generic error message gets used to report
the problem. This can be confusing when it comes to foreign tables and
partitioned tables, so use more dedicated messages in these cases.
Author: Amit Langote
Reviewed-by: Peter Eisentraut, Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/41799bee-40eb-7bb5-80b1-325ce17518bc@lab.ntt.co.jp
Up to now, createplan.c attempted to share PARAM_EXEC slots for
NestLoopParams across different plan levels, if the same underlying Var
was being fed down to different righthand-side subplan trees by different
NestLoops. This was, I think, more of an artifact of using subselect.c's
PlannerParamItem infrastructure than an explicit design goal, but anyway
that was the end result.
This works well enough as long as the plan tree is executing synchronously,
but the feature whereby Gather can execute the parallelized subplan locally
breaks it. An upper NestLoop node might execute for a row retrieved from
a parallel worker, and assign a value for a PARAM_EXEC slot from that row,
while the leader's copy of the parallelized subplan is suspended with a
different active value of the row the Var comes from. When control
eventually returns to the leader's subplan, it gets the wrong answers if
the same PARAM_EXEC slot is being used within the subplan, as reported
in bug #15577 from Bartosz Polnik.
This is pretty reminiscent of the problem fixed in commit 46c508fbc, and
the proper fix seems to be the same: don't try to share PARAM_EXEC slots
across different levels of controlling NestLoop nodes.
This requires decoupling NestLoopParam handling from PlannerParamItem
handling, although the logic remains somewhat similar. To avoid bizarre
division of labor between subselect.c and createplan.c, I decided to move
all the param-slot-assignment logic for both cases out of those files
and put it into a new file paramassign.c. Hopefully it's a bit better
documented now, too.
A regression test case for this might be nice, but we don't know a
test case that triggers the problem with a suitably small amount
of data.
Back-patch to 9.6 where we added Gather nodes. It's conceivable that
related problems exist in older branches; but without some evidence
for that, I'll leave the older branches alone.
Discussion: https://postgr.es/m/15577-ca61ab18904af852@postgresql.org
Since approximately PostgreSQL 10, it is no longer required that
environment variables at installation time such as PERL, PYTHON, TCLSH
be "full path names", so change that phrasing in the installation
instructions. (The exact time of change appears to differ for PERL
and the others, but it works consistently in PostgreSQL 10.)
Also while we're here document the defaults for PERL and PYTHON, but
since the search list for TCLSH is so long, let's leave that out so we
don't need to maintain a copy of that list in the installation
instructions.
This value represents the default behavior of using the current
timeline. Previously, this was represented by an empty string.
(Before the removal of recovery.conf, this setting could not be chosen
explicitly but was used when recovery_target_timeline was not
mentioned at all.)
Discussion: https://www.postgresql.org/message-id/flat/6dd2c23a-4162-8469-410f-bfe146e28c0c@2ndquadrant.com/
Reviewed-by: David Steele <david@pgmasters.net>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
particular user/db/query.
The function pg_stat_statements_reset() is extended to accept userid, dbid,
and queryid as input parameters. Now, it can discard the statistics
gathered so far by pg_stat_statements corresponding to the specified
userid, dbid, and queryid. If no parameter is specified or all the
specified parameters have default value aka 0, it will discard all
statistics as per the old behavior.
The new behavior is useful to get the fresh statistics for a specific
user/database/query without resetting all the existing statistics.
Author: Haribabu Kommi, with few additional changes by me
Reviewed-by: Michael Paquier, Amit Kapila and Fujii Masao
Discussion: https://postgr.es/m/CAJrrPGcyh-gkFswyc6C661K6cknL0XkNqVT0sQt2mFNMR4HRKA@mail.gmail.com
This was an oversight in commit 16828d5c. If the table is going to be
rewritten, we simply clear all the missing values from all the table's
attributes, since there will no longer be any rows with the attributes
missing. Otherwise, we repackage the missing value in an array
constructed with the new type specifications.
Backpatch to release 11.
This fixes bug #15446, reported by Dmitry Molotkov
Reviewed by Dean Rasheed
I chanced to notice that "make distprep" leaves a state of the
tree that git complains about. It's been like this for awhile,
but given the lack of complaints it probably doesn't need
back-patching.
Avoid using "typeid" as a parameter name in header files, since that
is a C++ keyword. These cases were introduced recently, in 04fe805a1
and 586b98fdf.
Since I'm an incurable neatnik, also rename these parameters in the
underlying function definitions. That's not really necessary per
project rules, but I don't like function declarations that don't
quite agree with the underlying definitions.
Per src/tools/pginclude/cpluspluscheck.
This commit moves expand_inherited_tables and underlings from
optimizer/prep/prepunionc.c to optimizer/utils/inherit.c.
Also, all of the AppendRelInfo-based expression manipulation routines
are moved to optimizer/utils/appendinfo.c.
No functional code changes. One exception is the introduction of
make_append_rel_info, but that's still just moving around code.
Also, stop including <limits.h> in prepunion.c, which no longer needs
it since 3fc6e2d7f5. I (Álvaro) noticed this because Amit was copying
that to inherit.c, which likewise doesn't need it.
Author: Amit Langote
Discussion: https://postgr.es/m/3be67028-a00a-502c-199a-da00eec8fb6e@lab.ntt.co.jp
Tom Lane
Peter Eisentraut
Michael Paquier
Magnus Hagander
Andrew Gierth
Tatsuo Ishii
Etsuro Fujita
Alvaro Herrera
Andres Freund
Heikki Linnakangas
Andrew Dunstan
Noah Misch
Amit Kapila