under libdir, for a cleaner separation in the installation layout
and compatibility with binary packaging standards. Point backend's
default search location there. The contrib modules are also
installed in the said location, giving them the benefit of the
default search path as well. No changes in user interface
nevertheless.
CREATE RULE bad_rule_combination_1 AS
ON SELECT TO emp
DO INSTEAD
SELECT * FROM toyemp;
CREATE RULE bad_rule_combination_2 AS
ON SELECT TO toyemp
DO INSTEAD
SELECT * FROM emp;
Tatsuo Ishii
Assign the fixed user id 1 to the user created by initdb.
A stand-alone backend will always set the user id to 1.
(Consequently, the name of that user is no longer important.)
In stand-alone mode, the user id 1 will have implicit superuser
status, to allow repairs even if there are no users defined.
Print a warning message when starting in stand-alone mode when no
users are defined.
Disallow dropping the current user and session user.
Granting/revoking superuser status also grants/revokes usecatupd.
(Previously, it would never grant it back. This could lead to "deadlocks".)
CREATE USER and CREATE GROUP will start allocating user ids at 100
(unless explicitly specified), to prevent accidental creation of a
superuser (plus some room for future extensions).
table creation time. Big deal you say - but this patch is the basis of the
next thing which is adding PRIMARY KEYs after table creation time. (Which
is currently impossible without twiddling catalogs)
Rundown
-------
* I have made the makeObjectName function of analyze.c non-static, and
exported it in analyze.h
* I have included analyze.h and defrem.h into command.c, to support
makingObjectNames and creating indices
* I removed the 'case CONSTR_PRIMARY' clause so that it properly fails and
says you can't add primary keys, rather than just doing nothing and
reporting nothing!!!
* I have modified the docs.
Algorithm
---------
* If name specified is null, search for a new valid constraint name. I'm
not sure if I should "lock" my generated name somehow tho - should I open
the relation before doing this step?
* Open relation in access exclusive mode
* Check that the constraint does not already exist
* Define the new index
* Warn if they're doubling up on an existing index
Christopher Kings-Lynne
occur unconditionally, even if the rule should otherwise execute
conditionally. This is more useful than giving an error, even though it's
not truly the correct behavior. Per today's pghackers discussion.
Client headers are no longer in a subdirectory, since they have been made
namespace-clean.
Internal libpq headers are in a private subdirectory.
Server headers are in a private subdirectory. pg_config has a new option
to point there.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
has an alias SERIAL4 and a sister SERIAL8. SERIAL8 is just the same
except the created column is type int8 not int4.
initdb forced. Note this also breaks any chance of pg_upgrade from 7.1,
unless we hack up pg_upgrade to drop and recreate sequences. (Which is
not out of the question, but I don't wanna do it.)
Allow pg_shadow to be MD5 encrypted.
Add ENCRYPTED/UNENCRYPTED option to CREATE/ALTER user.
Add password_encryption postgresql.conf option.
Update wire protocol version to 2.1.
syntax for language names (instead of 'string').
createlang now handles the case where a second language uses the same call
handler as an already installed language (e.g., plperl/plperlu).
droplang now handles the reverse case, i.e., dropping a language where
the call handler is still used by another language. Moreover, droplang
can now be used to drop any user-defined language, not just the supplied
ones.
Don't hardcode the maximum accepted server version, use PG_VERSION instead.
Install a notice processor so notices are handled like error messages.
Word smithing.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
clauses are equal(), before trying to match them up using btree opclass
inference rules. This allows it to recognize many simple cases involving
non-btree operations, for example 'x IS NULL'. Clean up code a little.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
USER and ALTER USER to appear in any order, not only the fixed order
they used to be required to appear in.
Also, some changes from Tom Lane to create a FULL option for VACUUM;
it doesn't do anything yet, but I needed to change many of the same
files to make that happen, so now seemed like a good time.
in cases of qualified rules as well as unqualified ones. Tweak rules
test to avoid cluttering output with dummy SELECT results. Update
documentation to match code.
for GRANT/REVOKE is now just that, not "CHANGE".
On the way, migrate some of the aclitem internal representation away from
the parser and build a real parse tree instead. Also add some 'const'
qualifiers.
Indicies: palm_buy_date_idx
palm_user_date_idx
Primary Key: palm_buyers_pkey
Unique Key: palm_buyers_username
Constraint: "$1" ((sex = 'M'::bpchar) OR (sex = 'F'::bpchar))
Note that check constraint name now shown as well. (Makes it a lot easier
to test inheritance support in ADD/DROP constraint :) )
Attached is a docs change for psql.
Christopher Kings
Python) to support shared extension modules, I have learned that Guido
prefers the style of the attached patch to solve the above problem.
I feel that this solution is particularly appropriate in this case
because the following:
PglargeType
PgType
PgQueryType
are already being handled in the way that I am proposing for PgSourceType.
Jason Tishler
still looking at the best way to integrate Tom Vijlbrief's fixes
(insofar as they're still needed); would 7.2 be a suitable time for
incompatible API changes?
Jeroen
Changes:
(*) Introduced bool, true, false (replacing some int, 1, 0)
(*) Made some member functions const
(*) Documented GetIsNull()
(*) Marked DisplayTuples() and PrintTuples() as obsolescent; fixed possible
portability problem (assumed that NULL pointer equals all-zero bit pattern)
(*) PrintTuples(): renamed width parameter to fillAlign to conform with other
usage; fixed memory leak and compile issue w.r.t. field separator (should
also slightly improve performance)
(*) Fixed some minor compilation issues
(*) Moved "using namespace std;" out of headers, where they didn't belong; used
new (temporary) preprocessor macro PGSTD to do this
(*) Made ToString() static, removed unneeded memset(), made buffer size adapt
to sizeof(int)
(*) Made some constructors explicit
(*) Changed some const std::string & parameters to plain std::string
(*) Marked PgCursor::Cursor(std::string) as obsolescent (setter with same name
as getter--bad style)
(*) Renamed some paramaters previously named "string"
(*) Introduced size_type typedef for number of tuples in result set
(*) PgTransaction now supports re-opening after closing, and aborts if not
explicitly committed prior to destruction
J. T. Vermeulen
===================
In Notes:
Refer to CREATE FUNCTION for information on creating aggregate functions.
^^^^^^^^^^^^^^^^^^^
I assume it must read C function instead.
In Compatibility SQL/PSM:
SQL/PSM is a proposed standard.
We had that before: remove proposed.
drop_index.sgml:
================
<REFNAME>: Removes existing indexes from a database
as far as I can see index should be singular. The command description is
written as if only one index can be removed at a time. Interestingly
enough, in v7.0.2 it was in fact singular. Am I mistaken here?
drop_operator.sgml:
===================
In Outputs the arguments are referred to as type and type2, but the synopsis
and Inputs section these are left_type and right_type, respectively. Also,
oper is used in Outputs versus id in Inputs/Synopsis. In the translation I
follow the replaceables used in the Inputs/Synopsis part.
Frank Wegmann
===================
In Notes:
Refer to CREATE FUNCTION for information on creating aggregate functions.
^^^^^^^^^^^^^^^^^^^
I assume it must read C function instead.
Frank Wegmann
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
being ratified as yet. This is certainly no longer true, it wasn't
even true in Q2/1998 when I did a little research for Date's book.
SQL/PSM had been published on 1996-12-15 as ISO/IEC 9075:4. So you
might want to update that section.
Frank Wegmann
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
not all of them attached properly in the post I made a few minutes
ago. Please disregard those earlier files. The diffs in the tar file
replace them.
Pierce Tyler
option of CREATE DATABASE. In pg_regress, create regression database
from template0 to ensure that any installation-local cruft in template1
will not mess up the tests.
Add -l option to name log file. Set umask to 077.
Proper file descriptor redirection to allow postmaster to detach from
shell's process group.
Add -s option to turn off informational messages.
and revert documentation to describe the existing INHERITS clause
instead, per recent discussion in pghackers. Also fix implementation
of SQL_inheritance SET variable: it is not cool to look at this var
during the initial parsing phase, only during parse_analyze(). See
recent bug report concerning misinterpretation of date constants just
after a SET TIMEZONE command. gram.y really has to be an invariant
transformation of the query string to a raw parsetree; anything that
can vary with time must be done during parse analysis.
the first paragraph:
As an example, say we wish to find all the records that
are in the temperature range of other records. In
effect, we need to compare the temp_lo and temp_hi
attributes of each EMP instance to the temp_lo and
temp_hi attributes of all other EMP instances.
I believe that EMP should read WEATHER, as the example query that
follows joins WEATHER to itself.
EMP is often used in Oracle examples.
Regards,
Graham
Other RULE cleanups
ISO-compliant UNION/INTERSECT/EXCEPT. Revise discussion of rule
rewriter to reflect new subselect-in-FROM implementation of views.
Miscellaneous other cleanups.
value greater than one. The behavior this sought to disallow doesn't
seem any less confusing than the other behaviors of cached sequences.
Improve wording of some error messages, too.
Update documentation accordingly. Also add an explanation that
aborted transactions do not roll back their nextval() calls; this
seems to be a FAQ, so it ought to be mentioned here...
IPC key assignment will now work correctly even when multiple postmasters
are using same logical port number (which is possible given -k switch).
There is only one shared-mem segment per postmaster now, not 3.
Rip out broken code for non-TAS case in bufmgr and xlog, substitute a
complete S_LOCK emulation using semaphores in spin.c. TAS and non-TAS
logic is now exactly the same.
When deadlock is detected, "Deadlock detected" is now the elog(ERROR)
message, rather than a NOTICE that comes out before an unhelpful ERROR.
Make version.sgml the central place for updating version numbers in the
documentation. Document titles now contain the version number of the
release they belong to.
filelist.sgml is the central (and only) place to declare system entities
(i.e., sgml files). No longer a need to declare them in each document
header.
There is no longer any need to maintain duplicate chapter lists in
postgres.sgml and user/admin/etc.sgml, everything is build from the same
sources. Some parameter entities allow for different text to be included
when the integrated or a single doc set is generated, which eliminates the
problems that had caused this to fail in the past.
in pghackers list. Support for oldstyle internal functions is gone
(no longer needed, since conversion is complete) and pg_language entry
'internal' now implies newstyle call convention. pg_language entry
'newC' is gone; both old and newstyle dynamically loaded C functions
are now called language 'C'. A newstyle function must be identified
by an associated info routine. See src/backend/utils/fmgr/README.
cloned, rather than always cloning template1. Modify initdb to generate
two identical databases rather than one, template0 and template1.
Connections to template0 are disallowed, so that it will always remain
in its virgin as-initdb'd state. pg_dumpall now dumps databases with
restore commands that say CREATE DATABASE foo WITH TEMPLATE = template0.
This allows proper behavior when there is user-added data in template1.
initdb forced!
hosting product, on both shared and dedicated machines. We currently
offer Oracle and MySQL, and it would be a nice middle-ground.
However, as shipped, PostgreSQL lacks the following features we need
that MySQL has:
1. The ability to listen only on a particular IP address. Each
hosting customer has their own IP address, on which all of their
servers (http, ftp, real media, etc.) run.
2. The ability to place the Unix-domain socket in a mode 700 directory.
This allows us to automatically create an empty database, with an
empty DBA password, for new or upgrading customers without having
to interactively set a DBA password and communicate it to (or from)
the customer. This in turn cuts down our install and upgrade times.
3. The ability to connect to the Unix-domain socket from within a
change-rooted environment. We run CGI programs chrooted to the
user's home directory, which is another reason why we need to be
able to specify where the Unix-domain socket is, instead of /tmp.
4. The ability to, if run as root, open a pid file in /var/run as
root, and then setuid to the desired user. (mysqld -u can almost
do this; I had to patch it, too).
The patch below fixes problem 1-3. I plan to address #4, also, but
haven't done so yet. These diffs are big enough that they should give
the PG development team something to think about in the meantime :-)
Also, I'm about to leave for 2 weeks' vacation, so I thought I'd get
out what I have, which works (for the problems it tackles), now.
With these changes, we can set up and run PostgreSQL with scripts the
same way we can with apache or proftpd or mysql.
In summary, this patch makes the following enhancements:
1. Adds an environment variable PGUNIXSOCKET, analogous to MYSQL_UNIX_PORT,
and command line options -k --unix-socket to the relevant programs.
2. Adds a -h option to postmaster to set the hostname or IP address to
listen on instead of the default INADDR_ANY.
3. Extends some library interfaces to support the above.
4. Fixes a few memory leaks in PQconnectdb().
The default behavior is unchanged from stock 7.0.2; if you don't use
any of these new features, they don't change the operation.
David J. MacKenzie
kibitzing from Tom Lane. Large objects are now all stored in a single
system relation "pg_largeobject" --- no more xinv or xinx files, no more
relkind 'l'. This should offer substantial performance improvement for
large numbers of LOs, since there won't be directory bloat anymore.
It'll also fix problems like running out of locktable space when you
access thousands of LOs in one transaction.
Also clean up cruft in read/write routines. LOs with "holes" in them
(never-written byte ranges) now work just like Unix files with holes do:
a hole reads as zeroes but doesn't occupy storage space.
INITDB forced!
as well allow DROP multiple INDEX, RULE, TYPE as well. Add missing
CommandCounterIncrement to DROP loop, which could cause trouble otherwise
with multiple DROP of items affecting same catalog entries. Try to
bring a little consistency to various error messages using 'does not exist',
'nonexistent', etc --- I standardized on 'does not exist' since that's
what the vast majority of the existing uses seem to be.
This patch forces the use of 'DROP VIEW' to destroy views.
It also changes the syntax of DROP VIEW to
DROP VIEW v1, v2, ...
to match the syntax of DROP TABLE.
Some error messages were changed so this patch also includes changes to the
appropriate expected/*.out files.
Doc changes for 'DROP TABLE" and 'DROP VIEW' are included.
--
Mark Hollomon
that RAND_MAX applies to them, since it doesn't. Instead add a
config.h parameter MAX_RANDOM_VALUE. This is currently set at 2^31-1
but could be auto-configured if that ever proves necessary. Also fix
some outright bugs like calling srand() where srandom() is appropriate.
