for speed reasons; its result type also changes to int8. avg() on these
datatypes now accumulates the running sum in int8 for speed; but we still
deliver the final result as numeric, so that fractional accuracy is
preserved.
count() now counts and returns in int8, not int4. I am a little nervous
about this possibly breaking users' code, but there didn't seem to be
a strong sentiment for avoiding the problem. If we get complaints during
beta, we can change count back to int4 and add a "count8" aggregate.
For that matter, users can do it for themselves with a simple CREATE
AGGREGATE command; the int4inc function is still present, so no C hacking
is needed.
Also added max() and min() aggregates for OID that do proper unsigned
comparison, instead of piggybacking on int4 aggregates.
initdb forced.
Note: I didn't force an initdb, figuring that one today was enough.
However, there is a new function in pg_proc.h, and pg_dump won't be
able to dump partial indexes until you add that function.
IS TRUE, etc, with some degree of verisimilitude. Split out
selectivity support functions from builtins.h into a new header
file selfuncs.h, so as to reduce the number of header files builtins.h
must depend on. Fix a few missing inclusions exposed thereby.
From Joe Conway, with some kibitzing from Tom Lane.
Tom Lane). For the moment, only the OID/name variants are provided.
I didn't force initdb, but the additions to the 'privileges' regress
test won't pass until you do one.
inet(text), cidr(text): convert a text value into inet/cidr
set_masklen(inet): set masklen on the inet value
Patch also contains regression checks for these functions.
Alex Pilosov
It "make"s and "make check"s clean against current cvs tip.
There are now both Text and Name variants, and the regression test support
is rolled into the patch. Note that to be complete wrt Name based variants,
there are now 12 user visible versions of has_table_privilege:
has_table_privilege(Text usename, Text relname, Text priv_type)
has_table_privilege(Text usename, Name relname, Text priv_type)
has_table_privilege(Name usename, Text relname, Text priv_type)
has_table_privilege(Name usename, Name relname, Text priv_type)
has_table_privilege(Text relname, Text priv_type) /* assumes current_user */
has_table_privilege(Name relname, Text priv_type) /* assumes current_user */
has_table_privilege(Text usename, Oid reloid, Text priv_type)
has_table_privilege(Name usename, Oid reloid, Text priv_type)
has_table_privilege(Oid reloid, Text priv_type) /* assumes current_user */
has_table_privilege(Oid usesysid, Text relname, Text priv_type)
has_table_privilege(Oid usesysid, Name relname, Text priv_type)
has_table_privilege(Oid usesysid, Oid reloid, Text priv_type)
For the Text based inputs, a new internal function, get_Name is used
(shamelessly copied from get_seq_name in sequence.c) to downcase if not
quoted, or remove quotes if quoted, and truncate. I also added a few test
cases for the downcasing, quote removal, and Name based variants to the
regression test.
Joe Conway
clause with an alias is a <subquery> and therefore hides table references
appearing within it, according to the spec. This is the same as the
preliminary patch I posted to pgsql-patches yesterday, plus some really
grotty code in ruleutils.c to reverse-list a query tree with the correct
alias name depending on context. I'd rather not have done that, but unless
we want to force another initdb for 7.1, there's no other way for now.
recommendation from Paul Vixie. Add a new abbrev() function to produce
abbreviated format as text. No forced initdb, but new function is not
available unless you do an initdb or add the pg_proc row manually.
varlena type. (I did not force initdb, but you won't see the fix
unless you do one.) Also, make sure all index support operators and
functions are careful not to leak memory for toasted inputs; I had
missed some hash and rtree support ops on this point before.
re-adopt these settings at every postmaster or standalone-backend startup.
This should fix problems with indexes becoming corrupt due to failure to
provide consistent locale environment for postmaster at all times. Also,
refuse to start up a non-locale-enabled compilation in a database originally
initdb'd with a non-C locale. Suppress LIKE index optimization if locale
is not "C" or "POSIX" (are there any other locales where it's safe?).
Issue NOTICE during initdb if selected locale disables LIKE optimization.
rather than just being aliases for int4in/int4out. Give type Oid a
full set of comparison operators that do proper unsigned comparison,
instead of reusing the int4 comparators. Since pg_dump is now doing
unsigned comparisons of OIDs, it is now *necessary* that we play by
the rules here. In fact, given that btoidcmp() has been doing unsigned
comparison for quite some time, it seems likely that we have index-
corruption problems in 7.0 and before once the Oid counter goes past
2G. Fixing these operators is a necessary step before we can think
about 8-byte Oid, too.
functions, per recent discussions on pghackers. For now, I have called
the verbose-display formatting function text(), but will reconsider if
enough people object.
initdb forced.
There is still no effective difference but it will kick in once setuid
functions exist (not included here). Make old getpgusername() alias for
current_user.
quote_ident(text) returns text
quote_literal(text) returns text
These are handy to build up properly quoted query strings
for the new PL/pgSQL EXECUTE functionality to submit
dynamic DDL statements.
Jan
length is < TOAST_TUPLE_THRESHOLD, even with toastable column types
present. For example, CREATE TABLE foo (f1 int, f2 varchar(100))
does not require a toast table, even though varchar is a toastable
type.
for example, an SQL function can be used in a functional index. (I make
no promises about speed, but it'll work ;-).) Clean up and simplify
handling of functions returning sets.
rather than the "~~" operator; this made it easy to add ESCAPE features.
Implement ILIKE, NOT ILIKE, and the ESCAPE clause for them.
afaict this is not MultiByte clean, but lots of other stuff isn't either.
Fix up underlying support code for LIKE/NOT LIKE.
Things should be faster and does not require internal string copying.
Update regression test to add explicit checks for
LIKE/NOT LIKE/ILIKE/NOT ILIKE.
Remove colon and semi-colon operators as threatened in 7.0.
Implement SQL99 COMMIT/AND NO CHAIN.
Throw elog(ERROR) on COMMIT/AND CHAIN per spec
since we don't yet support it.
Implement SQL99 CREATE/DROP SCHEMA as equivalent to CREATE DATABASE.
This is only a stopgap or demo since schemas will have another
implementation soon.
Remove a few unused production rules to get rid of warnings
which crept in on the last commit.
Fix up tabbing in some places by removing embedded spaces.
on myself to do something about the non-self-consistency of the inet
comparison functions. The results are probably still semantically wrong
(inet and cidr should have different comparison semantics, I think)
but at least the boolean operators now agree with each other and with
the sort order of indexes on inet/cidr.
At this point I think it'd be possible to make float4 be pass-by-value
without too much work --- and float8 too on machines where Datum is
8 bytes. Something to try when the mood strikes, anyway.
(Sorry, couldn't help it...)
Removed type filename as well, since it's unused and probably useless.
INITDB FORCED, because pg_rewrite columns are now plain text again.
I did not force. I marked numeric as compressable-but-not-move-off-able,
partly to test that storage mode and partly because I've got doubts
that numerics are large enough to need external storage.
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
backend functions via backend PQexec(). The SPI interface has long
been our only documented way to do this, and the backend pqexec/portal
code is unused and suffering bit-rot. I'm putting it out of its misery.
entries now for int8 and network hash indexes. int24_ops and int42_ops
are gone. pg_opclass no longer contains multiple entries claiming to be
the default opclass for the same datatype. opr_sanity regress test
extended to catch errors like these in the future.
inputs have been converted to newstyle. This should go a long way towards
fixing our portability problems with platforms where char and short
parameters are passed differently from int-width parameters. Still
more to do for the Alpha port however.
(LIKE and regexp matches). These are not yet referenced in pg_operator,
so by default the system will continue to use eqsel/neqsel.
Also, tweak convert_to_scalar() logic so that common prefixes of strings
are stripped off, allowing better accuracy when all strings in a table
share a common prefix.
Add a random number generator and seed setter (random(), SET SEED)
Fix up the interval*float8 math to carry partial months
into the time field.
Add float8*interval so we have symmetry in the available math.
Fix the parser and define.c to accept SQL92 types as field arguments.
Fix the parser to accept SQL92 types for CREATE TYPE, etc. This is
necessary to allow...
Bit/varbit support in contrib/bit cleaned up to compile and load
cleanly. Still needs some work before final release.
Implement the "SOME" keyword as a synonym for "ANY" per SQL92.
Implement ascii(text), ichar(int4), repeat(text,int4) to help
support the ODBC driver.
Enable the TRUNCATE() function mapping in the ODBC driver.
Clean up grotty coding in them, too. AFAICS from the CVS logs, these
have been broken since Postgres95, so I'm not going to insist on an
initdb to fix them now...
Implement TIME WITH TIME ZONE type (timetz internal type).
Remap length() for character strings to CHAR_LENGTH() for SQL92
and to remove the ambiguity with geometric length() functions.
Keep length() for character strings for backward compatibility.
Shrink stored views by removing internal column name list from visible rte.
Implement min(), max() for time and timetz data types.
Implement conversion of TIME to INTERVAL.
Implement abs(), mod(), fac() for the int8 data type.
Rename some math functions to generic names:
round(), sqrt(), cbrt(), pow(), etc.
Rename NUMERIC power() function to pow().
Fix int2 factorial to calculate result in int4.
Enhance the Oracle compatibility function translate() to work with string
arguments (from Edwin Ramirez).
Modify pg_proc system table to remove OID holes.
as a unary minus operator for numeric. Now that long numeric constants
will get converted to NUMERIC in early parsing, it's essential to have
numeric->int8 conversion to avoid 'can't convert' errors on undecorated
int8 constants. Threw in the rest for completeness while I was in the
area.
I did not force an initdb for this, since the system will still run
without the new pg_proc/pg_operator entries. Possibly I should've.
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
(ie, WHERE x > lowbound AND x < highbound). It's not very bright yet
but it does something useful. Also, rename intltsel/intgtsel to
scalarltsel/scalargtsel to reflect usage better. Extend convert_to_scalar
to do something a little bit useful with string data types. Still need
to make it do something with date/time datatypes, but I'll wait for
Thomas's datetime unification dust to settle first. Eventually the
routine ought not have any type-specific knowledge at all; it ought to
be calling a type-dependent routine found via a pg_type column; but
that's a task for another day.
pghackers discussion of 5-Jan-2000. The amopselect and amopnpages
estimators are gone, and in their place is a per-AM amcostestimate
procedure (linked to from pg_am, not pg_amop).
expressions in CREATE TABLE. There is no longer an emasculated expression
syntax for these things; it's full a_expr for constraints, and b_expr
for defaults (unfortunately the fact that NOT NULL is a part of the
column constraint syntax causes a shift/reduce conflict if you try a_expr.
Oh well --- at least parenthesized boolean expressions work now). Also,
stored expression for a column default is not pre-coerced to the column
type; we rely on transformInsertStatement to do that when the default is
actually used. This means "f1 datetime default 'now'" behaves the way
people usually expect it to.
BTW, all the support code is now there to implement ALTER TABLE ADD
CONSTRAINT and ALTER TABLE ADD COLUMN with a default value. I didn't
actually teach ALTER TABLE to call it, but it wouldn't be much work.
neqsel now behave as per my suggestions in pghackers a few days ago.
selectivity for < > <= >= should work OK for integral types as well, but
still need work for nonintegral types. Since these routines have never
actually executed before :-(, this may result in some significant changes
in the optimizer's choices of execution plans. Let me know if you see
any serious misbehavior.
CAUTION: THESE CHANGES REQUIRE INITDB. pg_statistic table has changed.
been applied. The patches are in the .tar.gz attachment at the end:
varchar-array.patch this patch adds support for arrays of bpchar() and
varchar(), which where always missing from postgres.
These datatypes can be used to replace the _char4,
_char8, etc., which were dropped some time ago.
block-size.patch this patch fixes many errors in the parser and other
program which happen with very large query statements
(> 8K) when using a page size larger than 8192.
This patch is needed if you want to submit queries
larger than 8K. Postgres supports tuples up to 32K
but you can't insert them because you can't submit
queries larger than 8K. My patch fixes this problem.
The patch also replaces all the occurrences of `8192'
and `1<<13' in the sources with the proper constants
defined in include files. You should now never find
8192 hardwired in C code, just to make code clearer.
--
Massimo Dal Zotto
results in a bogus datetime value under AlphaLinux. (Note that
the link to submit a port-specific bug on your website is broken)
-Test Case:
----------
testdb=> create table dttest (dt datetime);
testdb=> insert into dttest values ('now');
--------------------------------------------------------------------------
Solution:
---------
The basic problem is the typedefs of AbsoluteTime and RelativeTime,
which are both 'int32'. These types appear to be used synonymously
with the 'time_t' type, which on AlphaLinux is typedef'd as a 'long
int', which is 64-bits (not 32). The solution included here fixes
the datetime type (it now passes the regression test), but does not
pass the absolute and relative time regression tests. Presumably, a
more thorough investigation of how these types are used is warranted.
The included patch is from the v6.3.2 source, but can be applied to
the v6.4.2 source. Please note that there is also a RedHat-specific
patch distributed with the PostgreSQL source package from RedHat
that was applied first.
Rich Edwards
I would like some feedback on what the hash function for the int8 hash
function
in the ./backend/access/hash/hashfunc.c should return.
Also, could someone (maybe Tomas Lockhart?) look-over the patch and make
sure
the system table entries are correct? I've tried to research them as
much as I
could, but some of them are still not clear to me.
Thanks,
-Ryan
no longer returns buffer pointer, can be gotten from scan;
descriptor; bootstrap can create multi-key indexes;
pg_procname index now is multi-key index; oidint2, oidint4, oidname
are gone (must be removed from regression tests); use System Cache
rather than sequential scan in many places; heap_modifytuple no
longer takes buffer parameter; remove unused buffer parameter in
a few other functions; oid8 is not index-able; remove some use of
single-character variable names; cleanup Buffer variables usage
and scan descriptor looping; cleaned up allocation and freeing of
tuples; 18k lines of diff;
Attached to the mail is locale-patch.tar.gz. In the archive
there are:
file README.locale
short description
directory src/test/locale
test suite; currently only koi8-r tests, but the suite can be
easily extended
file locale.patch
the very patch; to apply: patch < locale.patch; should be applied
to postgres-6.3.2 (at least I created it with 6.3.2 without any
additional
patches)
Files touched by the patch: src/include/utils/builtins.h
src/backend/utils/adt/char.c src/backend/utils/adt/varchar.c
src/backend/utils/adt/varlena.c
Oleg
Hi, here are patches I promised (against 6.3.2):
* character_length(), position(), substring() are now aware of
multi-byte characters
* add octet_length()
* add --with-mb option to configure
* new regression tests for EUC_KR
(contributed by "Soonmyung. Hong" <hong@lunaris.hanmesoft.co.kr>)
* add some test cases to the EUC_JP regression test
* fix problem in regress/regress.sh in case of System V
* fix toupper(), tolower() to handle 8bit chars
note that:
o patches for both configure.in and configure are
included. maybe the one for configure is not necessary.
o pg_proc.h was modified to add octet_length(). I used OIDs
(1374-1379) for that. Please let me know if these numbers are not
appropriate.
1. Remove the char2, char4, char8 and char16 types from postgresql
2. Change references of char16 to name in the regression tests.
3. Rename the char16.sql regression test to name.sql. 4. Modify
the regression test scripts and outputs to match up.
Might require new regression.{SYSTEM} files...
Darren King
varchar length.
Cleans up code so attlen is always length.
Removed varchar() hack added earlier.
Will fix bug in selecting varchar() fields, and varchar() can be
variable length.
Add mixed-case #define synonyms to avoid changing more source code.
Add comparison operators for boolean.
Add aggregate min() and max() for datetime and timespan.
Subject: [HACKERS] Money integration patches
Here are patches to integrate the money data type. I have included
some math and aggregate functions and have made the locale support optional
by #ifdef USE_LOCALE bracketing of functions.
Modules affected are:
builtins.h.patch
cash.c.patch
cash.h.patch
main.c.patch
pg_aggregate.h.patch
pg_operator.h.patch
pg_proc.h.patch
pg_type.h.patch
I changed the data type to be pass-by-reference rather than by-value
to pave the way for a larger internal representation (64-bit ints?).
Also, I changed the tabbing of cash.c and cash.h to match most of
the other Postgres source code files (4 space indent, 8 spaces == 1 tab).
The locale stuff should be tested under another convention (Russian?)
but I don't know what the correct results should be so perhaps someone
else can give them a try. Will update docs and regression tests in
the next few days.
Subject: [HACKERS] More date time functions
Here are some additional patches mostly related to the date and time
data types. It includes some type conversion routines to move between
the different date types and some other date manipulation routines such
as date_part(units,datetime).
I noticed Edmund Mergl et al's neat trick for getting function overloading
for builtin functions, so started to use that for the date and time stuff.
Later, if someone figures out how to get function overloading directly
for internal C code, then we can move to that technique.
These patches include documentation updates (don't faint!) for the built-in
man page. Doesn't yet include mention of timestamp, since I don't know
much about it and since it may change a bit to become a _real_ ANSI timestamp
which would include parser support for the declaration syntax (what do you
think, Dan?).
The patches were developed on the 970330 release, but have been rebuilt
off of the 970402 release. The first patch below is to get libpq to compile,
on my Linux box, but is not related to the rest of the patches and you can
choose not to apply that one at this time. Thanks in advance, scrappy!
Subject: [HACKERS] backend/utils/adt/timestamp.c
Back to this timezone stuff. The struct tm has a field (tm_gmtoff) which
is the offset from UTC (GMT is archaic BTW) in seconds. Is this the
value you are looking for when you use timezone? Note that this applies
to NetBSD but it does not appear to be in either ANSI C or POSIX. This
looks like one of those things that is just going to have to be hand
coded for each platform.
Why not just store the values in UTC and use localtime instead of
gmtime when retrieving the value?
Also, you assume the time is returned as a 4 byte integer. In fact,
there is not even any requirement that time be an integral value. You
should use time_t here.
The input function seems unduly restrictive. Somewhere in the sources
there is an input function that allows words for months. Can't we do
the same here?
There is a standard function, difftime, for subtracting two times. It
deals with cases where time_t is not integral. There is, however, a
small performance hit since it returns a double and I don't believe
there is any system currently which uses anything but an integral for
time_t. Still, this is technically the correct and portable thing to do.
The returns from the various comparisons should probably be a bool.