Enabled by recovery_connections = on (default) and forcing archive recovery using a recovery.conf. Recovery processing now emulates the original transactions as they are replayed, providing full locking and MVCC behaviour for read only queries. Recovery must enter consistent state before connections are allowed, so there is a delay, typically short, before connections succeed. Replay of recovering transactions can conflict and in some cases deadlock with queries during recovery; these result in query cancellation after max_standby_delay seconds have expired. Infrastructure changes have minor effects on normal running, though introduce four new types of WAL record.
New test mode "make standbycheck" allows regression tests of static command behaviour on a standby server while in recovery. Typical and extreme dynamic behaviours have been checked via code inspection and manual testing. Few port specific behaviours have been utilised, though primary testing has been on Linux only so far.
This commit is the basic patch. Additional changes will follow in this release to enhance some aspects of behaviour, notably improved handling of conflicts, deadlock detection and query cancellation. Changes to VACUUM FULL are also required.
Simon Riggs, with significant and lengthy review by Heikki Linnakangas, including streamlined redesign of snapshot creation and two-phase commit.
Important contributions from Florian Pflug, Mark Kirkwood, Merlin Moncure, Greg Stark, Gianni Ciolli, Gabriele Bartolini, Hannu Krosing, Robert Haas, Tatsuo Ishii, Hiroyuki Yamada plus support and feedback from many other community members.
This was possibly linked to a deadlock-like situation in glibc syslog code
invoked by the ereport call in quickdie(). In any case, a signal handler
should not unblock its own signal unless there is a specific reason to.
presented with an UNKNOWN-type Var, which can happen in cases where an
unknown literal appeared in a subquery. While many such cases will fail
later on anyway in the planner, there are some cases where the planner is
able to flatten the query and replace the Var by the constant before it has
to coerce the union column to the final type. I had added this check in 8.4
to provide earlier/better error detection, but it causes a regression for
some cases that worked OK before. Fix by not making the check if the input
node is UNKNOWN type and not a Const or Param. If it isn't going to work,
it will fail anyway at plan time, with the only real loss being inability to
provide an error cursor. Per gripe from Britt Piehler.
In passing, rename a couple of variables to remove confusion from an
inner scope masking the same variable names in an outer scope.
ExplainSeparatePlans() was busted for both JSON and YAML output - the present
code is a holdover from the original version of my machine-readable explain
patch, which didn't have the grouping_stack machinery. Also, fix an odd
distribution of labor between ExplainBeginGroup() and ExplainYAMLLineStarting()
when marking lists with "- ", with each providing one character. This broke
the output format for multi-query statements. Also, fix ExplainDummyGroup()
for the YAML output format.
Along the way, make the YAML format use escape_yaml() in situations where the
JSON format uses escape_json(). Right now, it doesn't matter because all the
values are known not to need escaping, but it seems safer this way. Finally,
I added some comments to better explain what the YAML output format is doing.
Greg Sabino Mullane reported the issues with multi-query statements.
Analysis and remaining cleanups by me.
For long source strings the copying results in O(N^2) behavior, and the
multiplier can be significant if wide-char conversion is involved.
Andres Freund, reviewed by Kevin Grittner.
non-kluge method for controlling the order in which values are fed to an
aggregate function. At the same time eliminate the old implementation
restriction that DISTINCT was only supported for single-argument aggregates.
Possibly release-notable behavioral change: formerly, agg(DISTINCT x)
dropped null values of x unconditionally. Now, it does so only if the
agg transition function is strict; otherwise nulls are treated as DISTINCT
normally would, ie, you get one copy.
Andrew Gierth, reviewed by Hitoshi Harada
This patch also removes buffer-usage statistics from the track_counts
output, since this (or the global server statistics) is deemed to be a better
interface to this information.
Itagaki Takahiro, reviewed by Euler Taveira de Oliveira.
we have to cope with the possibility that the declared result rowtype contains
dropped columns. This fails in 8.4, as per bug #5240.
While at it, be more paranoid about inserting binary coercions when inlining.
The pre-8.4 code did not really need to worry about that because it could not
inline at all in any case where an added coercion could change the behavior
of the function's statement. However, when inlining a SRF we allow sorting,
grouping, and set-ops such as UNION. In these cases, modifying one of the
targetlist entries that the sort/group/setop depends on could conceivably
change the behavior of the function's statement --- so don't inline when
such a case applies.
does a search for the user in the directory first, and then binds with
the DN found for this user.
This allows for LDAP logins in scenarios where the DN of the user cannot
be determined simply by prefix and suffix, such as the case where different
users are located in different containers.
The old way of authentication can be significantly faster, so it's kept
as an option.
Robert Fleming and Magnus Hagander
correctly when the output bit width is wider than the given integer by
something other than a multiple of 8 bits.
This has been wrong since I first wrote that code for 8.0 :-(. Kudos to
Roman Kononov for being the first to notice, though I didn't use his
patch. Per bug #5237.
Without these functions, anyone outside of explain.c can't actually use
ExplainPrintPlan, because the ExplainState won't be initialized properly.
The user-visible result of this was a crash when using auto_explain with
the JSON output format.
Report by Euler Taveira de Oliveira. Analysis by Tom Lane. Patch by me.
before we zap the input tuple. Otherwise, pass-by-reference columns of
the result slot are likely to contain just references to the input
tuple, leading to big trouble if the pfree'd space is reused. Per
trouble report from Jaime Casanova. This is a new bug in the recent
rewrite of EvalPlanQual, so nothing to back-patch.
an allegedly immutable index function. It was previously recognized that
we had to prevent such a function from executing SET/RESET ROLE/SESSION
AUTHORIZATION, or it could trivially obtain the privileges of the session
user. However, since there is in general no privilege checking for changes
of session-local state, it is also possible for such a function to change
settings in a way that might subvert later operations in the same session.
Examples include changing search_path to cause an unexpected function to
be called, or replacing an existing prepared statement with another one
that will execute a function of the attacker's choosing.
The present patch secures VACUUM, ANALYZE, and CREATE INDEX/REINDEX against
these threats, which are the same places previously deemed to need protection
against the SET ROLE issue. GUC changes are still allowed, since there are
many useful cases for that, but we prevent security problems by forcing a
rollback of any GUC change after completing the operation. Other cases are
handled by throwing an error if any change is attempted; these include temp
table creation, closing a cursor, and creating or deleting a prepared
statement. (In 7.4, the infrastructure to roll back GUC changes doesn't
exist, so we settle for rejecting changes of "search_path" in these contexts.)
Original report and patch by Gurjeet Singh, additional analysis by
Tom Lane.
Security: CVE-2009-4136
attacks where an attacker would put <attack>\0<propername> in the field and
trick the validation code that the certificate was for <attack>.
This is a very low risk attack since it reuqires the attacker to trick the
CA into issuing a certificate with an incorrect field, and the common
PostgreSQL deployments are with private CAs, and not external ones. Also,
default mode in 8.4 does not do any name validation, and is thus also not
vulnerable - but the higher security modes are.
Backpatch all the way. Even though versions 8.3.x and before didn't have
certificate name validation support, they still exposed this field for
the user to perform the validation in the application code, and there
is no way to detect this problem through that API.
Security: CVE-2009-4034
support any indexable commutative operator, not just equality. Two rows
violate the exclusion constraint if "row1.col OP row2.col" is TRUE for
each of the columns in the constraint.
Jeff Davis, reviewed by Robert Haas
Instead of expensive cross joins to resolve the ACL, add table-returning
function aclexplode() that expands the ACL into a useful form, and join
against that.
Also, implement the role_*_grants views as a thin layer over the respective
*_privileges views instead of essentially repeating the same code twice.
fixes bug #4596
by Joachim Wieland, with cleanup by me
in a subtransaction stays open even if the subtransaction is aborted, so
any temporary files related to it must stay alive as well. With the patch,
we use ResourceOwners to track open temporary files and don't automatically
close them at subtransaction end (though in the normal case temporary files
are registered with the subtransaction resource owner and will therefore be
closed).
At end of top transaction, we still check that there's no temporary files
marked as close-at-end-of-transaction open, but that's now just a debugging
cross-check as the resource owner cleanup should've closed them already.
to the client by the server. This might seem pretty pointless but apparently
it will help pgbouncer, and perhaps other connection poolers. Anyway it's
practically free to do so for the normal use-case where appname is only set
in the startup packet --- we're just adding a few more bytes to the initial
ParameterStatus response packet. Per comments from Marko Kreen.
locale-dependent character classification properly when the database encoding
is UTF8.
The previous coding worked okay in single-byte encodings, or in any case for
ASCII characters, but failed entirely on multibyte characters. The fix
assumes that the <wctype.h> functions use Unicode code points as the wchar
representation for Unicode, ie, wchar matches pg_wchar.
This is only a partial solution, since we're still stupid about non-ASCII
characters in multibyte encodings other than UTF8. The practical effect
of that is limited, however, since those cases are generally Far Eastern
glyphs for which concepts like case-folding don't apply anyway. Certainly
all or nearly all of the field reports of problems have been about UTF8.
A more general solution would require switching to the platform's wchar
representation for all regex operations; which is possible but would have
substantial disadvantages. Let's try this and see if it's sufficient in
practice.
by adding a requirement that build_join_rel add new join RelOptInfos to the
appropriate list immediately at creation. Per report from Robert Haas,
the list_concat_unique_ptr() calls that this change eliminates were taking
the lion's share of the runtime in larger join problems. This doesn't do
anything to fix the fundamental combinatorial explosion in large join
problems, but it should push out the threshold of pain a bit further.
Note: because this changes the order in which joinrel lists are built,
it might result in changes in selected plans in cases where different
alternatives have exactly the same costs. There is one example in the
regression tests.
be part of multixacts, so allocate a slot for each prepared transaction in
the "oldest member" array in multixact.c. On PREPARE TRANSACTION, transfer
the oldest member value from the current backends slot to the prepared xact
slot. Also save and recover the value from the 2pc state file.
The symptom of the bug was that after a transaction prepared, a shared lock
still held by the prepared transaction was sometimes ignored by other
transactions.
Fix back to 8.1, where both 2PC and multixact were introduced.
checked to determine whether the trigger should be fired.
For BEFORE triggers this is mostly a matter of spec compliance; but for AFTER
triggers it can provide a noticeable performance improvement, since queuing of
a deferred trigger event and re-fetching of the row(s) at end of statement can
be short-circuited if the trigger does not need to be fired.
Takahiro Itagaki, reviewed by KaiGai Kohei.
output filename if CSV logging was enabled and only one of the two possible
output files got rotated during a particular call (which would, in fact,
typically be the case during a size-based rotation). This would amount to
about MAXPGPATH (1KB) per rotation, and it's been there since the CSV
code was put in, so it's surprising that nobody noticed it before.
Per bug #5196 from Thomas Poindessous.
strength of database passwords, and create a sample implementation of
such a hook as a new contrib module "passwordcheck".
Laurenz Albe, reviewed by Takahiro Itagaki
adopted for EXPLAIN. This will allow additional options to be implemented
in future without having to make them fully-reserved keywords. The old syntax
remains available for existing options, however.
Itagaki Takahiro
non-Var sort/group expressions using ressortgroupref labels instead of
depending entirely on equal()-ity of the upper node's tlist expressions
to the lower node's. This avoids emitting the wrong outputs in cases
where there are textually identical volatile sort/group expressions,
as for example
select distinct random(),random() from generate_series(1,10);
Per report from Andrew Gierth.
Backpatch to 8.4. Arguably this is wrong all the way back, but the only known
case where there's an observable problem is when using hash aggregation to
implement DISTINCT, which is new as of 8.4. So for the moment I'll refrain
from backpatching further.
mergejoin to shield it from doing mark/restore and refetches. Put an explicit
flag in MergePath so we can centralize the logic that knows about this,
and add costing logic that considers using Materialize even when it's not
forced by the previously-existing considerations. This is in response to
a discussion back in August that suggested that materializing an inner
indexscan can be helpful when the refetch percentage is high enough.
but the transformed ArrayExpr claimed to have a return type of "domain",
even though the domain constraint was only checked by the enclosing
CoerceToDomain node. With this fix, the ArrayExpr is correctly labeled with
the base type of the domain. Per gripe by Tom Lane.
we need to check domain constraints. We used to do it correctly, but 8.4
introduced a separate code path for the "ARRAY[]::arraytype" case to infer
the type of an empty ARRAY construct from the cast target, and forgot to take
domains into account.
Per report from Florian G. Pflug.
User-defined consistent functions believes the check array
contains at least one true element which was not a true for
scanning pending list.
Per report from Yury Don <yura@vpcit.ru>
Per discussion, this should result in defaulting to SQL_ASCII encoding.
The original coding could not support that because it conflated selection
of SQL_ASCII encoding with not being able to determine the encoding.
Adjust pg_get_encoding_from_locale()'s API to distinguish these cases,
and fix callers appropriately. Only initdb actually changes behavior,
since the other callers were perfectly content to consider these cases
equivalent.
Per bug #5178 from Boh Yap. Not going to bother back-patching, since
no one has complained before and there's an easy workaround (namely,
specify the encoding you want).
directly. This was a lot of trouble, but should be worth it in terms of
not having to keep the plpgsql lexer in step with core anymore. In addition
the handling of keywords is significantly better-structured, allowing us to
de-reserve a number of words that plpgsql formerly treated as reserved.
The main motivation for this is that it's required for Informix compatibility
in ECPG.
This patch makes the ECPG and core grammars a bit closer to one another for
these productions.
Author: Zoltan Boszormenyi
Peter Eisentraut
Simon Riggs
Bruce Momjian
Tom Lane
Robert Haas
Magnus Hagander
Itagaki Takahiro
Andrew Dunstan
Heikki Linnakangas
Teodor Sigaev
Alvaro Herrera