The list of indexes was being leaked when asked for an index that
doesn't have an index partition in the table partition. Not a common
case admittedly --and in most cases where it occurs, caller throws an
error anyway-- but worth fixing for cleanliness and in case any
third-party code is calling this function.
While at it, remove use of lfirst_oid() to obtain a value we already
have.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20201105203606.GF22691@telsasoft.com
This should have been done in the initial commit that made
unix_socket_directories a list as of c9b0cbe. This change allows to
support correctly the case of ALTER SYSTEM, where it is possible to
specify multiple paths as a list, like the following pattern where
flattening is applied to each item:
ALTER SYSTEM SET unix_socket_directories = '/path1', '/path2';
Any parameters specified in postgresql.conf are parsed the same way, so
there is no compatibility change. pg_dump has a hardcoded list of
parameters marked with GUC_LIST_QUOTE, that gets its routine update.
These are reordered alphabetically for clarity.
Author: Ian Lawrence Barwick
Reviewed-by: Peter Eisentraunt, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CAB8KJ=iMOtNY6_sUwV=LQVCJ2zgYHBDyNzVfvE5GN3WQ3v9kQg@mail.gmail.com
The table generation script would incorrectly complain in the
recomposition sorting when matching code points. This would not have
caused the generation of an incorrect table. Note that this condition
is not reachable yet, but could have been reached with future updates.
pg_bswap.h does not need to be included in the frontend.x
Author: John Naylor
Discussion: https://postgr.es/m/CAFBsxsGWmExpvv=61vtDKCs7+kBbhkwBDL2Ph9CacziFKnV_yw@mail.gmail.com
brin_form_tuple failed to consider the values may be toasted, inserting
the toast pointer into the index. This may easily result in index
corruption, as the toast data may be deleted and cleaned up by vacuum.
The cleanup however does not care about indexes, leaving invalid toast
pointers behind, which triggers errors like this:
ERROR: missing chunk number 0 for toast value 16433 in pg_toast_16426
A less severe consequence are inconsistent failures due to the index row
being too large, depending on whether brin_form_tuple operated on plain
or toasted version of the row. For example
CREATE TABLE t (val TEXT);
INSERT INTO t VALUES ('... long value ...')
CREATE INDEX idx ON t USING brin (val);
would likely succeed, as the row would likely include toast pointer.
Switching the order of INSERT and CREATE INDEX would likely fail:
ERROR: index row size 8712 exceeds maximum 8152 for index "idx"
because this happens before the row values are toasted.
The bug exists since PostgreSQL 9.5 where BRIN indexes were introduced.
So backpatch all the way back.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Backpatch-through: 9.5
Discussion: https://postgr.es/m/20201001184133.oq5uq75sb45pu3aw@development
Discussion: https://postgr.es/m/20201104010544.zexj52mlldagzowv%40development
Revert 59ab4ac32, as well as the followup fix 33862cb9c, in all
branches. We need to think a bit harder about what the behavior
of LOCK TABLE on views should be, and there's no time for that
before next week's releases. We'll take another crack at this
later.
Discussion: https://postgr.es/m/16703-e348f58aab3cf6cc@postgresql.org
Revert 403a3d91c, as well as the followup fix 7f4235032, in all
branches. We need to think a bit harder about what the behavior
of LOCK TABLE on views should be, and there's no time for that
before next week's releases. We'll take another crack at this
later.
Discussion: https://postgr.es/m/16703-e348f58aab3cf6cc@postgresql.org
Currently only OpenSSL requires this initialization, but in the future
other SSL implementations are likely to need it as well. Abstracting
this functionality out into a separate function makes this cleaner and
more clear, and also removes the dependency on OpenSSL headers from
fork_process.c.
OpenSSL is special in that we need to initialize this random number
generator even if we're not going to use it directly, until we drop
support for everything prior to OpenSSL 1.1.1. (And of course also if we
actually use it). All other implementations are left empty at this time,
but more are expected to be added in the future.
Author: Daniel Gustafsson <daniel@yesql.se>, Michael Paquier <michael@paquier.xyz>
Reviewed-By: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/F6291C3C-747C-4C93-BCE0-28BB420B1FF5@yesql.se
There is no outright bug here but it is better to be consistent with the
usage at other places in the same file. In the passing, fix a wrong
assertion in pgstat_recv_replslot.
Author: Kyotaro Horiguchi
Reviewed-by: Sawada Masahiko and Amit Kapila
Discussion: https://postgr.es/m/20201104.175523.1704166915688949637.horikyota.ntt@gmail.com
wal_consistency_checking indicated an inconsistency in certain cases
involving nbtree page deletion. The underlying issue is that there was
a minor difference between the page image produced after a REDO routine
ran and the corresponding page image following original execution.
This harmless inconsistency has been around forever. We more or less
expect total consistency among even deleted nbtree pages these days,
though, so this won't do anymore.
To fix, tweak the REDO routine to match original execution.
Oversight in commit f47b5e13.
LOCK TABLE has complained about "infinite recursion" when applied
to a self-referential view, ever since we made it recurse into views
in v11. However, that breaks pg_dump's new assumption that it's
okay to lock every relation. There doesn't seem to be any good
reason to throw an error: if we just abandon the recursion, we've
still satisfied the requirement of locking every referenced relation.
Per bug #16703 from Andrew Bille (via Alexander Lakhin).
Discussion: https://postgr.es/m/16703-e348f58aab3cf6cc@postgresql.org
Logic for counting heap TIDs from posting list tuples (added by commit
0d861bbb) was faulty. It didn't count any TIDs/index tuples in the
event of no callback being set. This meant that we incorrectly counted
no index tuples in clean-up only VACUUMs, which could lead to
pg_class.reltuples being spuriously set to 0 in affected indexes.
To fix, go back to counting items from the page in cases where there is
no callback. This approach isn't very accurate, but it works well
enough in practice while avoiding the expense of accessing every index
tuple during cleanup-only VACUUMs.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
https://postgr.es/m/20201023174451.69e358f1@firost
Backpatch: 13-, where nbtree deduplication was introduced
Commit dee663f7 intended to drop any queued up fsync requests before
unlinking segment files, but missed a code path. Fix, by centralizing
the forget-and-unlink code into a single function.
Reported-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Discussion: https://postgr.es/m/20201104013205.icogbi773przyny5%40development
float4_div and float8_div correctly produced zero for zero divided
by infinity, but threw an underflow error for nonzero finite values
divided by infinity. This seems wrong; at the very least it's
inconsistent with the behavior recently implemented for numeric
infinities. Remove the error and allow zero to be returned.
This patch also removes a useless isinf() test from the overflow
checks in these functions (non-Inf divided by Inf can't produce Inf).
Extracted from a larger patch; this seems significant outside the
context of geometric operators, so it deserves its own commit.
Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAGf+fX70rWFOk5cd00uMfa__0yP+vtQg5ck7c2Onb-Yczp0URA@mail.gmail.com
Convert array_append, array_prepend, array_cat, array_position,
array_positions, array_remove, array_replace, and width_bucket
to use anycompatiblearray. This is a simple extension of commit
5c292e6b9 to hit some other places where there's a pretty obvious
gain in usability from doing so.
Ideally we'd also modify other functions taking multiple old-style
polymorphic arguments. But most of the remainder are tied into one
or more operator classes, making any such change a much larger can of
worms than I desire to open right now.
Discussion: https://postgr.es/m/77675130-89da-dab1-51dd-492c93dcf5d1@postgresfriends.org
This allows use of a "default" expression that doesn't slavishly
match the data column's type. Formerly you got something like
"function lag(numeric, integer, integer) does not exist", which
is not just unhelpful but actively misleading.
The SQL spec suggests that the default should be coerced to the data
column's type, but this implementation instead chooses the common
supertype, which seems at least as reasonable.
(Note: I took the opportunity to run "make reformat-dat-files" on
pg_proc.dat, so this commit includes some cosmetic changes to
recently-added entries that aren't related to lead/lag.)
Vik Fearing
Discussion: https://postgr.es/m/77675130-89da-dab1-51dd-492c93dcf5d1@postgresfriends.org
The SQL spec calls out nonstandard syntax for certain function calls,
for example substring() with numeric position info is supposed to be
spelled "SUBSTRING(string FROM start FOR count)". We accept many
of these things, but up to now would not print them in the same format,
instead simplifying down to "substring"(string, start, count).
That's long annoyed me because it creates an interoperability
problem: we're gratuitously injecting Postgres-specific syntax into
what might otherwise be a perfectly spec-compliant view definition.
However, the real reason for addressing it right now is to support
a planned change in the semantics of EXTRACT() a/k/a date_part().
When we switch that to returning numeric, we'll have the parser
translate EXTRACT() to some new function name (might as well be
"extract" if you ask me) and then teach ruleutils.c to reverse-list
that per SQL spec. In this way existing calls to date_part() will
continue to have the old semantics.
To implement this, invent a new CoercionForm value COERCE_SQL_SYNTAX,
and make the parser insert that rather than COERCE_EXPLICIT_CALL when
the input has SQL-spec decoration. (But if the input has the form of
a plain function call, continue to mark it COERCE_EXPLICIT_CALL, even
if it's calling one of these functions.) Then ruleutils.c recognizes
COERCE_SQL_SYNTAX as a cue to emit SQL call syntax. It can know
which decoration to emit using hard-wired knowledge about the
functions that could be called this way. (While this solution isn't
extensible without manual additions, neither is the grammar, so this
doesn't seem unmaintainable.) Notice that this solution will
reverse-list a function call with SQL decoration only if it was
entered that way; so dump-and-reload will not by itself produce any
changes in the appearance of views.
This requires adding a CoercionForm field to struct FuncCall.
(I couldn't resist the temptation to rearrange that struct's
field order a tad while I was at it.) FuncCall doesn't appear
in stored rules, so that change isn't a reason for a catversion
bump, but I did one anyway because the new enum value for
CoercionForm fields could confuse old backend code.
Possible future work:
* Perhaps CoercionForm should now be renamed to DisplayForm,
or something like that, to reflect its more general meaning.
This'd require touching a couple hundred places, so it's not
clear it's worth the code churn.
* The SQLValueFunction node type, which was invented partly for
the same goal of improving SQL-compatibility of view output,
could perhaps be replaced with regular function calls marked
with COERCE_SQL_SYNTAX. It's unclear if this would be a net
code savings, however.
Discussion: https://postgr.es/m/42b73d2d-da12-ba9f-570a-420e0cce19d9@phystech.edu
Gen_fmgrtab.pl treated aggregate functions the same as other built-in
functions, which is wasteful because there is no real need to have
entries for them in the fmgr_builtins[] table. Suppressing those
entries saves about 3KB in the compiled table on my machine; which
is not a lot but it's not nothing either, considering that that
table is pretty "hot". The only outside code change needed is
that ExecInitWindowAgg() can't be allowed to call fmgr_info_cxt()
on a plain aggregate function. But that saves a few cycles anyway.
Having done that, the aggregate_dummy() function is unreferenced
and might as well be dropped. Using "aggregate_dummy" as the prosrc
value for an aggregate is now just a documentation convention not
something that matters. There was some discussion of using NULL
instead to save a few bytes in pg_proc, but we'd have to remove
prosrc's BKI_FORCE_NOT_NULL marking which doesn't seem a great idea.
Anyway, it's possible there's client-side code that expects to
see "aggregate_dummy" there, so I'm loath to change it without a
strong reason.
Discussion: https://postgr.es/m/533989.1604263665@sss.pgh.pa.us
Commit ac22929a26 changed recoveryWakeupLatch so that it's reset to
NULL at the end of recovery. This change could cause a segmentation fault
in the buildfarm member 'elver'.
Previously the latch was reset to NULL after calling ShutdownWalRcv().
But there could be a window between ShutdownWalRcv() and the actual
exit of walreceiver. If walreceiver set the latch during that window,
the segmentation fault could happen.
To fix the issue, this commit changes walreceiver so that it sets
the latch only when the latch has not been reset to NULL yet.
Author: Fujii Masao
Discussion: https://postgr.es/m/5c1f8a85-747c-7bf9-241e-dd467d8a3586@iki.fi
hash_array_extended() needs to pass PG_GET_COLLATION() to the hash
function of the element type. Otherwise, the hash function of a
collation-aware data type such as text will error out, since the
introduction of nondeterministic collation made hash functions require
a collation, too.
The consequence of this is that before this change, hash partitioning
using an array over text in the partition key would not work.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/32c1fdae-95c6-5dc6-058a-a90330a3b621%40enterprisedb.com
This makes the abstraction of a "source" server more clear, by introducing
a common abstract class, borrowing the object-oriented programming term,
that represents all the operations that can be done on the source server.
There are two implementations of it, one for fetching via libpq, and
another to fetch from a local directory. This adds some code, but makes it
easier to understand what's going on.
The copy_executeFileMap() and libpq_executeFileMap() functions contained
basically the same logic, just calling different functions to fetch the
source files. Refactor so that the common logic is in one place, in a new
function called perform_rewind().
Reviewed-by: Kyotaro Horiguchi, Soumyadeep Chakraborty
Discussion: https://www.postgresql.org/message-id/0c5b3783-af52-3ee5-f8fa-6e794061f70d%40iki.fi
Deciding what to do with each file is now a separate step after all the
necessary information has been gathered. It is more clear that way.
Previously, the decision-making was divided between process_source_file()
and process_target_file(), and it was a bit hard to piece together what
the overall rules were.
Reviewed-by: Kyotaro Horiguchi, Soumyadeep Chakraborty
Discussion: https://www.postgresql.org/message-id/0c5b3783-af52-3ee5-f8fa-6e794061f70d%40iki.fi
This commit gets rid of the dedicated latch for signaling the startup
process in favor of using its procLatch, since that comports better
with possible generic signal handlers using that latch.
Commit 1e53fe0e70 changed background processes so that they use standard
SIGHUP handler. Like that, this commit also makes the startup process use
standard SIGHUP handler to simplify the code.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACXPorUqePswDtOeM_s82v9RW32E1fYmOPZ5NuE+TWKj_A@mail.gmail.com
Accept that we can't get versions for such locale names for now. Users
will need to specify the newer language tag format to enable the
collation versioning feature. It's not clear that we can do automatic
conversion from the old style to the new style reliably enough for this
purpose.
Unfortunately, this means that collation versioning probably won't work
for the default collation unless you provide something like en-US at
initdb or CREATE DATABASE time (though, for reasons not yet understood,
it does seem to work on some systems). It'd be nice to find a better
solution, or document this quirk if we settle on it, but this should
unbreak the 3 failing build farm animals in the meantime.
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
When considering Incremental Sort below a Gather Merge, we need to be
a bit more careful when matching pathkeys to EC members. It's not enough
to find a member whose Vars are all in the current relation's target;
volatile expressions in particular need to be contained in the target,
otherwise it's too early to use the pathkey.
Reported-by: Jaime Casanova
Author: James Coleman
Reviewed-by: Tomas Vondra
Backpatch-through: 13, where the incremental sort code was added
Discussion: https://postgr.es/m/CAJGNTeNaxpXgBVcRhJX%2B2vSbq%2BF2kJqGBcvompmpvXb7pq%2BoFA%40mail.gmail.com
If the planner erroneously puts a non-parallel-safe SubPlan into
a parallelized portion of the query tree, nodeSubplan.c will fail
in the worker processes because it finds a null in es_subplanstates,
which it's unable to cope with. It seems worth a test-and-elog to
make that an error case rather than a core dump case.
This probably should have been included in commit 16ebab688, which
was responsible for allowing nulls to appear in es_subplanstates
to begin with. So, back-patch to v10 where that came in.
Discussion: https://postgr.es/m/924226.1604422326@sss.pgh.pa.us
The intention in commit 491c029db was to require superuserness to
change the BYPASSRLS property, but the actual effect of the coding
in AlterRole() was to require superuserness to change anything at all
about a BYPASSRLS role. Other properties of a BYPASSRLS role should
be changeable under the same rules as for a normal role, though.
Fix that, and also take care of some documentation omissions related
to BYPASSRLS and REPLICATION role properties.
Tom Lane and Stephen Frost, per bug report from Wolfgang Walther.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/a5548a9f-89ee-3167-129d-162b5985fcf8@technowledgy.de
The current implementation cannot handle this correctly, so just
forbid it for now.
GENERATED clauses must be attached to the column definition and cannot
be added later like DEFAULT, so if a child table has a generation
expression that the parent does not have, the child column will
necessarily be an attlocal column. So to implement ALTER TABLE ONLY /
DROP EXPRESSION, we'd need extra code to update attislocal of the
direct child tables, somewhat similar to how DROP COLUMN does it, so
that the resulting state can be properly dumped and restored.
Discussion: https://www.postgresql.org/message-id/flat/15830.1575468847%40sss.pgh.pa.us
Remove old containment operators @ and ~ for built-in geometry data
types. These have been deprecated; use <@ and @> instead.
(Some contrib modules still contain the same deprecated operators.
That will be dealt with separately.)
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://www.postgresql.org/message-id/flat/20201027032511.GF9241@telsasoft.com
Commit 3a9ae3d206 (back in 2006) deprecated TG_RELNAME
in favor of TG_TABLE_NAME, but the existing usage in test
cases has remained till today. Change to use TG_TABLE_NAME
instead (TG_RELNAME is still covered by a test case).
Commit d94c36a45a introduced error handling to sslinfo to handle
OpenSSL errors gracefully. This ports this errorhandling to the
backend TLS implementation.
Author: Daniel Gustafsson <daniel@yesql.se>
sslinfo was passing the Port->ssl member directly to OpenSSL in order
to extract information regarding the connection. This breaks the API
provided by the backend TLS implementation, as well as duplicates code
for no benefit. Rewrite to make use of the backend API as much as
possible.
Author: Daniel Gustafsson <daniel@yesql.se>
fill_hba_line() thought it could get away with passing sizeof(struct
sockaddr_storage) rather than the actual addrlen previously returned
by getaddrinfo(). While that appears to work on many platforms,
it does not work on FreeBSD 11: you get back a failure, which leads
to the view showing NULL for the address and netmask columns in all
rows. The POSIX spec for getnameinfo() is pretty clearly on
FreeBSD's side here: you should pass the actual address length.
So it seems plausible that there are other platforms where this
coding also fails, and we just hadn't noticed.
Also, IMO the fact that getnameinfo() failure leads to a NULL output
is pretty bogus in itself. Our pg_getnameinfo_all() wrapper is
careful to emit "???" on failure, and we should use that in such
cases. NULL should only be emitted in rows that don't have IP
addresses.
Per bug #16695 from Peter Vandivier. Back-patch to v10 where this
code was added.
Discussion: https://postgr.es/m/16695-a665558e2f630be7@postgresql.org
make_ruledef() and make_viewdef() were coded to cope with possible
null-ness of these columns, but they've been marked BKI_FORCE_NOT_NULL
for some time. So there's not really any need to do more than what
we do for the other columns of pg_rewrite, i.e. just Assert that
we got non-null results.
(There is a school of thought that says Asserts aren't the thing
to do to check for corrupt data, but surely here is not the place
to start if we want such a policy.)
Also, remove long-dead-if-indeed-it-ever-wasn't-dead handling of
an empty actions list in make_ruledef(). That's an error case
and should be treated as such. (DO INSTEAD NOTHING is represented
by a CMD_NOTHING Query, not an empty list; cf transformRuleStmt.)
Kyotaro Horiguchi, some changes by me
Discussion: https://postgr.es/m/CAEudQApoA=tMTic6xEPYP_hsNZ8XtToVThK_0x7D_aFQYowq3w@mail.gmail.com
Traditionally, the names of fmgroids.h macros for pg_proc OIDs
have been constructed from the prosrc field. But sometimes the
same C function underlies multiple pg_proc entries, forcing us
to make an arbitrary choice of which OID to reference; the other
entries are then not namable via fmgroids.h. Moreover, we could
not have macros at all for pg_proc entries that aren't for
C-coded functions.
Instead, use the proname field, and append the proargtypes field
(replacing inter-argument spaces with underscores) if proname is
not unique. Special-casing unique entries such as F_OIDEQ removes
the need to change a lot of code. Indeed, I can only find two
places in the tree that need to be adjusted; while this changes
quite a few existing entries in fmgroids.h, few of them are
referenced from C code.
With this patch, all entries in pg_proc.dat have macros in fmgroids.h.
Discussion: https://postgr.es/m/472274.1604258384@sss.pgh.pa.us
On detecting a corrupted match tag, pglz_decompress() should just
summarily return -1. Breaking out of the loop, as I did in dfc797730,
doesn't quite guarantee that will happen. Also, we can use
unlikely() on that check, just in case it helps.
Backpatch to v13, like the previous patch.
Some places were using PG_GETARG_UINT32 where PG_GETARG_TRANSACTIONID
would be more appropriate. (Of course, they are the same internally,
so there is no externally visible effect.) To do that, export
PG_GETARG_TRANSACTIONID outside of xid.c. We also export
PG_RETURN_TRANSACTIONID for symmetry, even though there are currently
no external users.
Author: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/d8f6bdd536df403b9b33816e9f7e0b9d@G08CNEXMBPEKD05.g08.fujitsu.local
Record the current version of dependent collations in pg_depend when
creating or rebuilding an index. When accessing the index later, warn
that the index may be corrupted if the current version doesn't match.
Thanks to Douglas Doole, Peter Eisentraut, Christoph Berg, Laurenz Albe,
Michael Paquier, Robert Haas, Tom Lane and others for very helpful
discussion.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com> (earlier versions)
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
Provide a place for the version of referenced database objects to be
recorded. A follow-up commit will use this to record dependencies on
collation versions for indexes, but similar ideas for other kinds of
objects have also been mooted.
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com
This model couldn't be extended to cover the default collation, and
didn't have any information about the affected database objects when the
version changed. Remove, in preparation for a follow-up commit that
will add a new mechanism.
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://postgr.es/m/CAEepm%3D0uEQCpfq_%2BLYFBdArCe4Ot98t1aR4eYiYTe%3DyavQygiQ%40mail.gmail.com