Move the code for doing parent attnos to child attnos mapping for Vars
in partition constraint expressions to a separate function
map_partition_varattnos() and call it from the appropriate places.
Doing it in get_qual_from_partbound(), as is now, would produce wrong
result in certain multi-level partitioning cases, because it only
considers the current pair of parent-child relations. In certain
multi-level partitioning cases, attnums for the same key attribute(s)
might differ between various levels causing the same attribute to be
numbered differently in different instances of the Var corresponding
to a given attribute.
With this commit, in generate_partition_qual(), we first generate the
the whole partition constraint (considering all levels of partitioning)
and then do the mapping, so that Vars in the final expression are
numbered according the leaf relation (to which it is supposed to apply).
Amit Langote, reviewed by me.
If inherited tables don't have exactly the same schema, the USING clause
in an ALTER TABLE / SET DATA TYPE misbehaves when applied to the
children tables since commit 9550e8348b. Starting with that commit,
the attribute numbers in the USING expression are fixed during parse
analysis. This can lead to bogus errors being reported during
execution, such as:
ERROR: attribute 2 has wrong type
DETAIL: Table has type smallint, but query expects integer.
Since it wouldn't do to revert to the original coding, we now apply a
transformation to map the attribute numbers to the correct ones for each
child.
Reported by Justin Pryzby
Analysis by Tom Lane; patch by me.
Discussion: https://postgr.es/m/20170102225618.GA10071@telsasoft.com
array_fill(..., array[0]) produced an empty array, which is probably
what users expect, but it was a one-dimensional zero-length array
which is not our standard representation of empty arrays. Also, for
no very good reason, it rejected empty input arrays; that case should
be allowed and produce an empty output array.
In passing, remove the restriction that the input array(s) have lower
bound 1. That seems rather pointless, and it would have needed extra
complexity to make the check deal with empty input arrays.
Per bug #14487 from Andrew Gierth. It's been broken all along, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/20170105152156.10135.64195@wrigleys.postgresql.org
Inheritance operations must treat the OID column, if any, much like
regular user columns. But MergeAttributesIntoExisting() neglected to
do that, leading to weird results after a table with OIDs is associated
to a parent with OIDs via ALTER TABLE ... INHERIT.
Report and patch by Amit Langote, reviewed by Ashutosh Bapat, some
adjustments by me. It's been broken all along, so back-patch to
all supported branches.
Discussion: https://postgr.es/m/cb13cfe7-a48c-5720-c383-bb843ab28298@lab.ntt.co.jp
After a tuple is routed to a partition, it has been converted from the
root table's row type to the partition's row type. ExecConstraints
needs to report the failure using the original tuple and the parent's
tuple descriptor rather than the ones for the selected partition.
Amit Langote
Add methods to the core test framework PostgresNode.pm to allow us to
test that standby nodes have caught up with the master, as well as
basic LSN handling. Used in tests recovery/t/001_stream_rep.pl and
recovery/t/004_timeline_switch.pl
Craig Ringer, reviewed by Aleksander Alekseev and Simon Riggs
The purpose of the test was to check access to the sequence relation on
a hot standby, so change the test to read a different column from the
sequence, instead of just reading the catalog.
From: Andreas Karlsson <andreas@proxel.se>
Since streaming is now supported for all output formats, make this the
default as this is what most people want.
To get the old behavior, the parameter -X none can be specified to turn
it off.
This also removes the parameter -x for fetch, now requiring -X fetch to
be specified to use that.
Reviewed by Vladimir Rusinov, Michael Paquier and Simon Riggs
It is no longer necessary to restart the server to enable, disable,
or reconfigure SSL. Instead, we just create a new SSL_CTX struct
(by re-reading all relevant files) whenever we get SIGHUP. Testing
shows that this is fast enough that it shouldn't be a problem.
In conjunction with that, downgrade the logic that complains about
pg_hba.conf "hostssl" lines when SSL isn't active: now that's just
a warning condition not an error.
An issue that still needs to be addressed is what shall we do with
passphrase-protected server keys? As this stands, the server would
demand the passphrase again on every SIGHUP, which is certainly
impractical. But the case was only barely supported before, so that
does not seem a sufficient reason to hold up committing this patch.
Andreas Karlsson, reviewed by Michael Banck and Michael Paquier
Discussion: https://postgr.es/m/556A6E8A.9030400@proxel.se
Commit 2ac3ef7a0 added a query with an underdetermined output row order;
it has failed multiple times in the buildfarm since then. Add an ORDER BY
to fix. Also, don't rely on a DROP CASCADE to drop in a well-determined
order; that hasn't failed yet but I don't trust it much, and we're not
saving any typing by using CASCADE anyway.
interval_transform() contained two separate bugs that caused it to
sometimes mistakenly decide that a cast from interval to restricted
interval is a no-op and throw it away.
First, it was wrong to rely on dt.h's field type macros to have an
ordering consistent with the field's significance; in one case they do
not. This led to mistakenly treating YEAR as less significant than MONTH,
so that a cast from INTERVAL MONTH to INTERVAL YEAR was incorrectly
discarded.
Second, fls(1<<k) produces k+1 not k, so comparing its output directly
to SECOND was wrong. This led to supposing that a cast to INTERVAL
MINUTE was really a cast to INTERVAL SECOND and so could be discarded.
To fix, get rid of the use of fls(), and make a function based on
intervaltypmodout to produce a field ID code adapted to the need here.
Per bug #14479 from Piotr Stefaniak. Back-patch to 9.2 where transform
functions were introduced, because this code was born broken.
Discussion: https://postgr.es/m/20161227172307.10135.7747@wrigleys.postgresql.org
\crosstabview's complaint about multiple entries for the same crosstab
cell quoted the wrong row and/or column values. It would accidentally
appear to work if the data had been in strcmp() order to start with,
which probably explains how we missed noticing this during development.
This could be fixed in more than one way, but the way I chose was to
hang onto both result pointers from bsearch() and use those to get at
the value names.
In passing, avoid casting away const in the bsearch comparison functions.
No bug there, just poor style.
Per bug #14476 from Tomonari Katsumata. Back-patch to 9.6 where
\crosstabview was introduced.
Report: https://postgr.es/m/20161225021519.10139.45460@wrigleys.postgresql.org
The previous coding failed to work correctly when we have a
multi-level partitioned hierarchy where tables at successive levels
have different attribute numbers for the partition key attributes. To
fix, have each PartitionDispatch object store a standalone
TupleTableSlot initialized with the TupleDesc of the corresponding
partitioned table, along with a TupleConversionMap to map tuples from
the its parent's rowtype to own rowtype. After tuple routing chooses
a leaf partition, we must use the leaf partition's tuple descriptor,
not the root table's. To that end, a dedicated TupleTableSlot for
tuple routing is now allocated in EState.
Amit Langote
When we are altering a text search configuration, we are getting the
tuple from pg_ts_config and using its OID, so use TSConfigRelationId
when invoking any post-alter hooks and setting the object address.
Further, in the functions called from AlterTSConfiguration(), we're
saving information about the command via
EventTriggerCollectAlterTSConfig(), so we should be setting
commandCollected to true. Also add a regression test to
test_ddl_deparse for ALTER TEXT SEARCH CONFIGURATION.
Author: Artur Zakirov, a few additional comments by me
Discussion: https://www.postgresql.org/message-id/57a71eba-f2c7-e7fd-6fc0-2126ec0b39bd%40postgrespro.ru
Back-patch the fix for the InvokeObjectPostAlterHook() call to 9.3 where
it was introduced, and the fix for the ObjectAddressSet() call and
setting commandCollected to true to 9.5 where those changes to
ProcessUtilitySlow() were introduced.
Having a WITH OIDS specification should result in the creation of an OID
column, but commit b943f502b broke that in the case that there were LIKE
tables without OIDS. Commentary in that patch makes it look like this was
intentional, but if so it was based on a faulty reading of what inheritance
does: the parent tables can add an OID column, but they can't subtract one.
AFAICS, the behavior ought to be that you get an OID column if any of the
inherited tables, LIKE tables, or WITH clause ask for one.
Also, revert that patch's unnecessary split of transformCreateStmt's loop
over the tableElts list into two passes. That seems to have been based on
a misunderstanding as well: we already have two-pass processing here,
we don't need three passes.
Per bug #14474 from Jeff Dafoe. Back-patch to 9.6 where the misbehavior
was introduced.
Report: https://postgr.es/m/20161222145304.25620.47445@wrigleys.postgresql.org
When the input value to a CoerceToDomain expression node is a read-write
expanded datum, we should pass a read-only pointer to any domain CHECK
expressions and then return the original read-write pointer as the
expression result. Previously we were blindly passing the same pointer to
all the consumers of the value, making it possible for a function in CHECK
to modify or even delete the expanded value. (Since a plpgsql function
will absorb a passed-in read-write expanded array as a local variable
value, it will in fact delete the value on exit.)
A similar hazard of passing the same read-write pointer to multiple
consumers exists in domain_check() and in ExecEvalCase, so fix those too.
The fix requires adding MakeExpandedObjectReadOnly calls at the appropriate
places, which is simple enough except that we need to get the data type's
typlen from somewhere. For the domain cases, solve this by redefining
DomainConstraintRef.tcache as okay for callers to access; there wasn't any
reason for the original convention against that, other than not wanting the
API of typcache.c to be any wider than it had to be. For CASE, there's
no good solution except to add a syscache lookup during executor start.
Per bug #14472 from Marcos Castedo. Back-patch to 9.5 where expanded
values were introduced.
Discussion: https://postgr.es/m/15225.1482431619@sss.pgh.pa.us
In an attempt to simplify the tsquery matching engine, the original
phrase search patch invented rewrite rules that would rearrange a
tsquery so that no AND/OR/NOT operator appeared below a PHRASE operator.
But this approach had numerous problems. The rearrangement step was
missed by ts_rewrite (and perhaps other places), allowing tsqueries
to be created that would cause Assert failures or perhaps crashes at
execution, as reported by Andreas Seltenreich. The rewrite rules
effectively defined semantics for operators underneath PHRASE that were
buggy, or at least unintuitive. And because rewriting was done in
tsqueryin() rather than at execution, the rearrangement was user-visible,
which is not very desirable --- for example, it might cause unexpected
matches or failures to match in ts_rewrite.
As a somewhat independent problem, the behavior of nested PHRASE operators
was only sane for left-deep trees; queries like "x <-> (y <-> z)" did not
behave intuitively at all.
To fix, get rid of the rewrite logic altogether, and instead teach the
tsquery execution engine to manage AND/OR/NOT below a PHRASE operator
by explicitly computing the match location(s) and match widths for these
operators.
This requires introducing some additional fields into the publicly visible
ExecPhraseData struct; but since there's no way for third-party code to
pass such a struct to TS_phrase_execute, it shouldn't create an ABI problem
as long as we don't move the offsets of the existing fields.
Another related problem was that index searches supposed that "!x <-> y"
could be lossily approximated as "!x & y", which isn't correct because
the latter will reject, say, "x q y" which the query itself accepts.
This required some tweaking in TS_execute_ternary along with the main
tsquery engine.
Back-patch to 9.6 where phrase operators were introduced. While this
could be argued to change behavior more than we'd like in a stable branch,
we have to do something about the crash hazards and index-vs-seqscan
inconsistency, and it doesn't seem desirable to let the unintuitive
behaviors induced by the rewriting implementation stand as precedent.
Discussion: https://postgr.es/m/28215.1481999808@sss.pgh.pa.us
Discussion: https://postgr.es/m/26706.1482087250@sss.pgh.pa.us
When CREATE OR REPLACE VIEW acts on an existing view, don't update the
view options until after the view query has been updated.
This is necessary in the case where CREATE OR REPLACE VIEW is used on
an existing view that is not updatable, and the new view is updatable
and specifies the WITH CHECK OPTION. In this case, attempting to apply
the new options to the view before updating its query fails, because
the options are applied using the ALTER TABLE infrastructure which
checks that WITH CHECK OPTION is only applied to an updatable view.
If new columns are being added to the view, that is also done using
the ALTER TABLE infrastructure, but it is important that that still be
done before updating the view query, because the rules system checks
that the query columns match those on the view relation. Added a
comment to explain that, in case someone is tempted to move that to
where the view options are now being set.
Back-patch to 9.4 where WITH CHECK OPTION was added.
Report: https://postgr.es/m/CAEZATCUp%3Dz%3Ds4SzZjr14bfct_bdJNwMPi-gFi3Xc5k1ntbsAgQ%40mail.gmail.com
It's not entirely clear that we should log a message here at all, but
it's certainly wrong to use elog() for a message that should clearly
be translatable.
Amit Langote
Move sequence metadata (start, increment, etc.) into a proper system
catalog instead of storing it in the sequence heap object. This
separates the metadata from the sequence data. Sequence metadata is now
operated on transactionally by DDL commands, whereas previously
rollbacks of sequence-related DDL commands would be ignored.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
If a query contained two aggregates that could share the transition value,
we would correctly collect the input into a tuplesort only once, but
incorrectly run the transition function over the accumulated input twice,
in finalize_aggregates(). That caused a crash, when we tried to call
tuplesort_performsort() on an already-freed NULL tuplestore.
Backport to 9.6, where sharing of transition state and this bug were
introduced.
Analysis by Tom Lane.
Discussion: https://www.postgresql.org/message-id/ac5b0b69-744c-9114-6218-8300ac920e61@iki.fi
The distance of a removed phrase operator should propagate up to a
parent phrase operator if there is one, but this only worked correctly
in left-deep trees. Throwing in a few parentheses confused it completely,
as indeed was illustrated by bizarre results in existing regression test
cases.
To fix, track unaccounted-for distances that should propagate to the left
and to the right of the current node, rather than trying to make it work
with only one returned distance.
Also make some adjustments to behave as well as we can for cases of
intermixed phrase and regular (AND/OR) operators. I don't think it's
possible to be 100% correct for that without a rethinking of the tsquery
representation; for example, maybe we should just not drop stopword nodes
at all underneath phrase operators. But this is better than it was,
and changing tsquery representation wouldn't be safely back-patchable.
While at it, I simplified the API of the clean_fakeval_intree function
a bit by getting rid of the "char *result" output parameter; that wasn't
doing anything that wasn't redundant with whether the result node is
NULL or not, and testing for NULL seems a lot clearer/safer.
This is part of a larger project to fix various infelicities in the
phrase-search implementation, but this part seems comittable on its own.
Back-patch to 9.6 where phrase operators were introduced.
Discussion: https://postgr.es/m/28215.1481999808@sss.pgh.pa.us
Discussion: https://postgr.es/m/26706.1482087250@sss.pgh.pa.us
This feature is also known as "quorum commit" especially in discussion
on pgsql-hackers.
This commit adds the following new syntaxes into synchronous_standby_names
GUC. By using FIRST and ANY keywords, users can specify the method to
choose synchronous standbys from the listed servers.
FIRST num_sync (standby_name [, ...])
ANY num_sync (standby_name [, ...])
The keyword FIRST specifies a priority-based synchronous replication
which was available also in 9.6 or before. This method makes transaction
commits wait until their WAL records are replicated to num_sync
synchronous standbys chosen based on their priorities.
The keyword ANY specifies a quorum-based synchronous replication
and makes transaction commits wait until their WAL records are
replicated to *at least* num_sync listed standbys. In this method,
the values of sync_state.pg_stat_replication for the listed standbys
are reported as "quorum". The priority is still assigned to each standby,
but not used in this method.
The existing syntaxes having neither FIRST nor ANY keyword are still
supported. They are the same as new syntax with FIRST keyword, i.e.,
a priorirty-based synchronous replication.
Author: Masahiko Sawada
Reviewed-By: Michael Paquier, Amit Kapila and me
Discussion: <CAD21AoAACi9NeC_ecm+Vahm+MMA6nYh=Kqs3KB3np+MBOS_gZg@mail.gmail.com>
Many thanks to the various individuals who were involved in
discussing and developing this feature.
There's no good reason why plpgsql's GET DIAGNOSTICS statement can't
support an array element as target variable, since the execution code
already uses the generic exec_assign_value() function to assign to it.
Hence, refactor the grammar to allow that, by making getdiag_target
depend on the assign_var production.
Ideally we'd also let a cursor_variable expand to an element of a
refcursor[] array, but that's substantially harder since those statements
also have to handle bound-cursor-variable cases. For now, just make sure
the reported error is sensible, ie "cursor variable must be a simple
variable" not "variable must be of type cursor or refcursor". The latter
was quite confusing from the user's viewpoint, since what he wrote
satisfies the claimed restriction.
Per bug #14463 from Zhou Digoal. Given the lack of previous complaints,
I see no need for a back-patch.
Discussion: https://postgr.es/m/20161213152548.14897.81245@wrigleys.postgresql.org
This allows creating temporary replication slots that are removed
automatically at the end of the session or on error.
From: Petr Jelinek <petr.jelinek@2ndquadrant.com>
When ts_rewrite()'s replacement argument is an empty tsquery, it's supposed
to simplify any operator nodes whose operand(s) become NULL; but it failed
to do that reliably, because dropvoidsubtree() only examined the top level
of the result tree. Rather than make a second recursive pass, let's just
give the responsibility to dofindsubquery() to simplify while it's doing
the main replacement pass. Per report from Andreas Seltenreich.
Artur Zakirov, with some cosmetic changes by me. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/8737i01dew.fsf@credativ.de
array_position and its cousin array_positions were caching the element
type equality function's FmgrInfo without being careful enough to put it
in a long-lived context. This is obviously broken but it didn't matter
in most cases; only when using arrays of records (involving record_eq)
it becomes a problem. The fix is to ensure that the type's equality
function's FmgrInfo is cached in the array_position's flinfo->fn_mcxt
rather than the current memory context.
Apart from record types, the only other case that seems complex enough
to possibly cause the same problem are range types. I didn't find a way
to reproduce the problem with those, so I only include the test case
submitted with the bug report as regression test.
Bug report and patch: Junseok Yang
Discussion: https://postgr.es/m/CAE+byMupUURYiZ6bKYgMZb9pgV1CYAijJGqWj-90W=nS7uEOeA@mail.gmail.com
Backpatch to 9.5, where array_position appeared.
expandRTE() and get_rte_attribute_type() reported the exprType() and
exprTypmod() values of the expressions in the first row of the VALUES as
being the column type/typmod returned by the VALUES RTE. That's fine for
the data type, since we coerce all expressions in a column to have the same
common type. But we don't coerce them to have a common typmod, so it was
possible for rows after the first one to return values that violate the
claimed column typmod. This leads to the incorrect result seen in bug
#14448 from Hassan Mahmood, as well as some other corner-case misbehaviors.
The desired behavior is the same as we use in other type-unification
cases: report the common typmod if there is one, but otherwise return -1
indicating no particular constraint. It's cheap for transformValuesClause
to determine the common typmod while transforming a multi-row VALUES, but
it'd be less cheap for expandRTE() and get_rte_attribute_type() to
re-determine that info every time they're asked --- possibly a lot less
cheap, if the VALUES has many rows. Therefore, the best fix is to record
the common typmods explicitly in a list in the VALUES RTE, as we were
already doing for column collations. This looks quite a bit like what
we're doing for CTE RTEs, so we can save a little bit of space and code by
unifying the representation for those two RTE types. They both now share
coltypes/coltypmods/colcollations fields. (At some point it might seem
desirable to populate those fields for all RTE types; but right now it
looks like constructing them for other RTE types would add more code and
cycles than it would save.)
The RTE change requires a catversion bump, so this fix is only usable
in HEAD. If we fix this at all in the back branches, the patch will
need to look quite different.
Report: https://postgr.es/m/20161205143037.4377.60754@wrigleys.postgresql.org
Discussion: https://postgr.es/m/27429.1480968538@sss.pgh.pa.us
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
We have had support for restrictive RLS policies since 9.5, but they
were only available through extensions which use the appropriate hooks.
This adds support into the grammer, catalog, psql and pg_dump for
restrictive RLS policies, thus reducing the cases where an extension is
necessary.
In passing, also move away from using "AND"d and "OR"d in comments.
As pointed out by Alvaro, it's not really appropriate to attempt
to make verbs out of "AND" and "OR", so reword those comments which
attempted to.
Reviewed By: Jeevan Chalke, Dean Rasheed
Discussion: https://postgr.es/m/20160901063404.GY4028@tamriel.snowman.net
Must do pg_stat_clear_snapshot() inside test's loop, or our snapshot of
pg_stat_activity will never change :-(. Thinko in b3427dade -- evidently
my workstation never really iterated the loop in testing. Per buildfarm.
deleteWhatDependsOn() had grown an uncomfortably large number of
assumptions about what it's used for. There are actually only two minor
differences between what it does and what a regular performDeletion() call
can do, so let's invent additional bits in performDeletion's existing flags
argument that specify those behaviors, and get rid of deleteWhatDependsOn()
as such. (We'd probably have done it this way from the start, except that
performDeletion didn't originally have a flags argument, IIRC.)
Also, add a SKIP_EXTENSIONS flag bit that prevents ever recursing to an
extension, and use that when dropping temporary objects at session end.
This provides a more general solution to the problem addressed in a hacky
way in commit 08dd23cec: if an extension script creates temp objects and
forgets to remove them again, the whole extension went away when its
contained temp objects were deleted. The previous solution only covered
temp relations, but this solves it for all object types.
These changes require minor additions in dependency.c to pass the flags
to subroutines that previously didn't get them, but it's still a net
savings of code, and it seems cleaner than before.
Having done this, revert the special-case code added in 08dd23cec that
prevented addition of pg_depend records for temp table extension
membership, because that caused its own oddities: dropping an extension
that had created such a table didn't automatically remove the table,
leading to a failure if the table had another dependency on the extension
(such as use of an extension data type), or to a duplicate-name failure if
you then tried to recreate the extension. But we keep the part that
prevents the pg_temp_nnn schema from becoming an extension member; we never
want that to happen. Add a regression test case covering these behaviors.
Although this fixes some arguable bugs, we've heard few field complaints,
and any such problems are easily worked around by explicitly dropping temp
objects at the end of extension scripts (which seems like good practice
anyway). So I won't risk a back-patch.
Discussion: https://postgr.es/m/e51f4311-f483-4dd0-1ccc-abec3c405110@BlueTreble.com
Commit 08dd23cec introduced an exception to the rule that extension member
objects can only be dropped as part of dropping the whole extension,
intending to allow such drops while running the extension's own creation or
update scripts. However, the exception was only applied at the outermost
recursion level, because it was modeled on a pre-existing check to ignore
dependencies on objects listed in pendingObjects. Bug #14434 from Philippe
Beaudoin shows that this is inadequate: in some cases we can reach an
extension member object by recursion from another one. (The bug concerns
the serial-sequence case; I'm not sure if there are other cases, but there
might well be.)
To fix, revert 08dd23cec's changes to findDependentObjects() and instead
apply the creating_extension exception regardless of stack level.
Having seen this example, I'm a bit suspicious that the pendingObjects
logic is also wrong and such cases should likewise be allowed at any
recursion level. However, changing that would interact in subtle ways
with the recursion logic (at least it would need to be moved to after the
recursing-from check). Given that the code's been like that a long time,
I'll refrain from touching it without a clear example showing it's wrong.
Back-patch to all active branches. In HEAD and 9.6, where suitable
test infrastructure exists, add a regression test case based on the
bug report.
Report: <20161125151448.6529.33039@wrigleys.postgresql.org>
Discussion: <13224.1480177514@sss.pgh.pa.us>
When dropping a foreign key constraint with ALTER TABLE DROP CONSTRAINT,
we refuse the drop if there are any pending trigger events on the named
table; this ensures that we won't remove the pg_trigger row that will be
consulted by those events. But we should make the same check for the
referenced relation, else we might remove a due-to-be-referenced pg_trigger
row for that relation too, resulting in "could not find trigger NNN" or
"relation NNN has no triggers" errors at commit. Per bug #14431 from
Benjie Gillam. Back-patch to all supported branches.
Report: <20161124114911.6530.31200@wrigleys.postgresql.org>
Previously, requesting commit timestamp for transactions
FrozenTransactionId and BootstrapTransactionId resulted in an error.
But since those values can validly appear in committed tuples' Xmin,
this behavior is unhelpful and error prone: each caller would have to
special-case those values before requesting timestamp data for an Xid.
We already have a perfectly good interface for returning "the Xid you
requested is too old for us to have commit TS data for it", so let's use
that instead.
Backpatch to 9.5, where commit timestamps appeared.
Author: Craig Ringer
Discussion: https://www.postgresql.org/message-id/CAMsr+YFM5Q=+ry3mKvWEqRTxrB0iU3qUSRnS28nz6FJYtBwhJg@mail.gmail.com
When rebuilding an existing index, ALTER TABLE correctly kept the
physical file in the same tablespace, but it messed up the pg_class
entry if the index had been in the database's default tablespace
and "default_tablespace" was set to some non-default tablespace.
This led to an inaccessible index.
Fix by fixing pg_get_indexdef_string() to always include a tablespace
clause, whether or not the index is in the default tablespace. The
previous behavior was installed in commit 537e92e41, and I think it just
wasn't thought through very clearly; certainly the possible effect of
default_tablespace wasn't considered. There's some risk in changing the
behavior of this function, but there are no other call sites in the core
code. Even if it's being used by some third party extension, it's fairly
hard to envision a usage that is okay with a tablespace clause being
appended some of the time but can't handle it being appended all the time.
Back-patch to all supported versions.
Code fix by me, investigation and test cases by Michael Paquier.
Discussion: <1479294998857-5930602.post@n3.nabble.com>
Previously, the right-hand side of a multiple-column assignment, if it
wasn't a sub-SELECT, had to be a simple parenthesized expression list,
because gram.y was responsible for "bursting" the construct into
independent column assignments. This had the minor defect that you
couldn't write ROW (though you should be able to, since the standard says
this is a row constructor), and the rather larger defect that unlike other
uses of row constructors, we would not expand a "foo.*" item into multiple
columns.
Fix that by changing the RHS to be just "a_expr" in the grammar, leaving
it to transformMultiAssignRef to separate the elements of a RowExpr;
which it will do only after performing standard transformation of the
RowExpr, so that "foo.*" behaves as expected.
The key reason we didn't do that before was the hard-wired handling of
DEFAULT tokens (SetToDefault nodes). This patch deals with that issue by
allowing DEFAULT in any a_expr and having parse analysis throw an error
if SetToDefault is found in an unexpected place. That's an improvement
anyway since the error can be more specific than just "syntax error".
The SQL standard suggests that the RHS could be any a_expr yielding a
suitable row value. This patch doesn't really move the goal posts in that
respect --- you're still limited to RowExpr or a sub-SELECT --- but it does
fix the grammar restriction, so it provides some tangible progress towards
a full implementation. And the limitation is now documented by an explicit
error message rather than an unhelpful "syntax error".
Discussion: <8542.1479742008@sss.pgh.pa.us>
Because we use transformTargetList() for UPDATE as well as SELECT
tlists, the code accidentally tried to expand a "*" reference into
several columns. This is nonsensical, because the UPDATE syntax
provides exactly one target column to put the value into. The
immediate result was that transformUpdateTargetList() got confused
and reported "UPDATE target count mismatch --- internal error".
It seems better to treat such a reference as a plain whole-row
variable, as it would be in other contexts. (This could produce
useful results when the target column is of composite type.)
Fix by tweaking transformTargetList() to perform *-expansion only
conditionally, depending on its exprKind parameter.
Back-patch to 9.3. The problem exists further back, but a fix would be
much more invasive before that, because transformTargetList() wasn't
told what kind of list it was working on. Doesn't seem worth the
trouble given the lack of field reports. (I only noticed it because
I was checking the code while trying to improve the documentation about
how we handle "foo.*".)
Discussion: <4308.1479595330@sss.pgh.pa.us>
Like pg_tables, pg_views, and others, this view contains information
about sequences in a way that is independent of the system catalog
layout but more comprehensive than the information schema.
To help implement the view, add a new internal function
pg_sequence_last_value() to return the last value of a sequence. This
is kept separate from pg_sequence_parameters() to separate querying
run-time state from catalog-like information.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Add a new optional Makefile variable PROVE_TESTS that, if passed as a
space-separated list of paths relative to the Makefile invoking
$(prove_check) or $(prove_installcheck), runs just those tests instead
of t/*.pl .
From: Craig Ringer <craig@2ndquadrant.com>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
We just pass the data to the INSTEAD trigger.
Haribabu Kommi, reviewed by Dilip Kumar
Patch: <CAJrrPGcSQkrNkO+4PhLm4B8UQQQmU9YVUuqmtgM=pmzMfxWaWQ@mail.gmail.com>
Invent a new function heap_modify_tuple_by_cols() that is functionally
equivalent to SPI_modifytuple except that it always allocates its result
by simple palloc. I chose however to make the API details a bit more
like heap_modify_tuple: pass a tupdesc rather than a Relation, and use
bool convention for the isnull array.
Use this function in place of SPI_modifytuple at all call sites where the
intended behavior is to allocate in current context. (There actually are
only two call sites left that depend on the old behavior, which makes me
wonder if we should just drop this function rather than keep it.)
This new function is easier to use than heap_modify_tuple() for purposes
of replacing a single column (or, really, any fixed number of columns).
There are a number of places where it would simplify the code to change
over, but I resisted that temptation for the moment ... everywhere except
in plpgsql's exec_assign_value(); changing that might offer some small
performance benefit, so I did it.
This is on the way to removing SPI_push/SPI_pop, but it seems like
good code cleanup in its own right.
Discussion: <9633.1478552022@sss.pgh.pa.us>
There's basically no scenario where it's sensible for this to match
dropped columns, so put a test for dropped-ness into SPI_fnumber()
itself, and excise the test from the small number of callers that
were paying attention to the case. (Most weren't :-(.)
In passing, normalize tests at call sites: always reject attnum <= 0
if we're disallowing system columns. Previously there was a mixture
of "< 0" and "<= 0" tests. This makes no practical difference since
SPI_fnumber() never returns 0, but I'm feeling pedantic today.
Also, in the places that are actually live user-facing code and not
legacy cruft, distinguish "column not found" from "can't handle
system column".
Per discussion with Jim Nasby; thi supersedes his original patch
that just changed the behavior at one call site.
Discussion: <b2de8258-c4c0-1cb8-7b97-e8538e5c975c@BlueTreble.com>
In each case, absence of a trailing newline would itself constitute a
PostgreSQL bug. Therefore, this slightly enhances the changed tests.
This works around a bug that last appeared in Perl 5.8.8, fixing
src/test/modules/test_pg_dump when run against that version. Commit
e7293e3271 worked around the bug, but the
subsequent addition of test_pg_dump introduced affected code. As that
commit had shown, slight increases in pattern complexity can suppress
the bug. This commit edits qr/foo$/m patterns too complex to encounter
the bug today, for style consistency and robustness against unrelated
pattern changes. Back-patch to 9.6, where test_pg_dump was introduced.
As of this writing, a fresh MSYS installation includes an affected Perl
5.8.8. The Perl 5.8.8 in Red Hat Enterprise Linux 5.11 carries a patch
that renders it unaffected, but the Perl 5.8.5 of Red Hat Enterprise
Linux 4.4 is affected.
We really ought to make StdRdOptions and the other decoded forms of
reloptions self-identifying, but for the moment, assume that only plain
relations could possibly be user_catalog_tables. Fixes problem with bogus
"ON CONFLICT is not supported on table ... used as a catalog table" error
when target is a view with cascade option.
Discussion: <26681.1477940227@sss.pgh.pa.us>
We must do this in case the expression evaluation results in calling
another plpgsql function (or, really, anything using SPI). I missed
the need for this when I converted exec_cast_value() from doing a
simple InputFunctionCall() to doing ExecEvalExpr() in commit 1345cc67b.
There is a SPI_push_conditional in InputFunctionCall(), so that there
was no bug before that.
Per bug #14414 from Marcos Castedo. Add a regression test based on his
example, which was that a plpgsql function in a domain check constraint
didn't work when assigning to a domain-type variable within plpgsql.
Report: <20161106010947.1387.66380@wrigleys.postgresql.org>
While converting expressions in an upper-level plan node so that they
reference Vars and expressions provided by the input plan node(s),
don't convert plain Const items, even if there happens to be a matching
Const in the input. It's silly to do so because a Var is more expensive to
execute than a Const. Moreover, converting can fool ExecCheckPlanOutput's
check that an insert or update query inserts nulls into dropped columns,
leading to "query provides a value for a dropped column" errors during
INSERT or UPDATE on a table with a dropped column. We could solve this
by making that check more complicated, but I don't see the point; this fix
should save a marginal number of cycles, and it also makes for less messy
EXPLAIN output, as shown by the ensuing regression test result changes.
Per report from Pavel Hanák. I have not incorporated a test case based
on that example, as there doesn't seem to be a simple way of checking
this in isolation without making a bunch of assumptions about other
planner and SQL-function behavior.
Back-patch to 9.6. This setrefs.c behavior exists much further back,
but there is not currently reason to think that it causes problems
before 9.6.
Discussion: <83shraampf.fsf@is-it.eu>
QTNTernary() contains logic to flatten, eg, '(a & b) & c' into 'a & b & c',
which is all well and good, but it tries to do that to NOT nodes as well,
so that '!!a' gets changed to '!a'. Explicitly restrict the conversion to
be done only on AND and OR nodes, and add a test case illustrating the bug.
In passing, provide some comments for the sadly naked functions in
tsquery_util.c, and simplify some baroque logic in QTNFree(), which
I think may have been leaking some items it intended to free.
Noted while investigating a complaint from Andreas Seltenreich.
Back-patch to all supported versions.
If a restartpoint flushed no dirty buffers, it could fail to update
the minimum recovery point, leading to a minimum recovery point prior
to the starting REDO location. perform_base_backup() would interpret
that as meaning that no WAL files at all needed to be included in the
backup, failing an internal sanity check. To fix, have restartpoints
always update the minimum recovery point to just after the checkpoint
record itself, so that the file (or files) containing the checkpoint
record will always be included in the backup.
Code by Amit Kapila, per a design suggestion by me, with some
additional work on the code comment by me. Test case by Michael
Paquier. Report by Kyotaro Horiguchi.
The code to change the deferrability properties of a foreign-key constraint
updated all the associated triggers to match; but a moment's examination of
the code that creates those triggers in the first place shows that only
some of them should track the constraint's deferrability properties. This
leads to odd failures in subsequent exercise of the foreign key, as the
triggers are fired at the wrong times. Fix that, and add a regression test
comparing the trigger properties produced by ALTER CONSTRAINT with those
you get by creating the constraint as-intended to begin with.
Per report from James Parks. Back-patch to 9.4 where this ALTER
functionality was introduced.
Report: <CAJ3Xv+jzJ8iNNUcp4RKW8b6Qp1xVAxHwSXVpjBNygjKxcVuE9w@mail.gmail.com>
An oversight in setting the boundaries of known commit timestamps during
startup caused old commit timestamps to become inaccessible after a
server restart.
Author and reporter: Julien Rouhaud
Review, test code: Craig Ringer
A transaction that conflicts against itself, for example
INSERT INTO t(pk) VALUES (1),(1) ON CONFLICT DO NOTHING;
should behave the same regardless of isolation level. It certainly
shouldn't throw a serialization error, as retrying will not help.
We got this wrong due to the ON CONFLICT logic not considering the case,
as reported by Jason Dusek.
Core of this patch is by Peter Geoghegan (based on an earlier patch by
Thomas Munro), though I didn't take his proposed code refactoring for fear
that it might have unexpected side-effects. Test cases by Thomas Munro
and myself.
Report: <CAO3NbwOycQjt2Oqy2VW-eLTq2M5uGMyHnGm=RNga4mjqcYD7gQ@mail.gmail.com>
Related-Discussion: <57EE93C8.8080504@postgrespro.ru>
Despite the argumentation I wrote in commit 7a2fe85b0, it's unsafe to do
this, because in corner cases it's possible for HeapTupleSatisfiesSelf
to try to set hint bits on the target tuple; and at least since 8.2 we
have required the buffer content lock to be held while setting hint bits.
The added regression test exercises one such corner case. Unpatched, it
causes an assertion failure in assert-enabled builds, or otherwise would
cause a hint bit change in a buffer we don't hold lock on, which given
the right race condition could result in checksum failures or other data
consistency problems. The odds of a problem in the field are probably
pretty small, but nonetheless back-patch to all supported branches.
Report: <19391.1477244876@sss.pgh.pa.us>
Switch TAP tests to use the new wait mode of pg_ctl promote. This
allows avoiding extra logic with poll_query_until() to be sure that a
promoted standby is ready for read-write queries.
From: Michael Paquier <michael.paquier@gmail.com>
--noclean and --nosync were the only options spelled without a hyphen,
so change this for consistency with other options. The options in
pg_basebackup have not been in a release, so we just rename them. For
initdb, we retain the old variants.
Vik Fearing and me
When a relation is truncated, it is important that the FSM is truncated as
well. Otherwise, after recovery, the FSM can return a page that has been
truncated away, leading to errors like:
ERROR: could not read block 28991 in file "base/16390/572026": read only 0
of 8192 bytes
We were using MarkBufferDirtyHint() to dirty the buffer holding the last
remaining page of the FSM, but during recovery, that might in fact not
dirty the page, and the FSM update might be lost.
To fix, use the stronger MarkBufferDirty() function. MarkBufferDirty()
requires us to do WAL-logging ourselves, to protect from a torn page, if
checksumming is enabled.
Also fix an oversight in visibilitymap_truncate: it also needs to WAL-log
when checksumming is enabled.
Analysis by Pavan Deolasee.
Discussion: <CABOikdNr5vKucqyZH9s1Mh0XebLs_jRhKv6eJfNnD2wxTn=_9A@mail.gmail.com>
On my system, this improves coverage for src/backend/access/hash from
61.3% of lines to 88.2% of lines, and from 83.5% of functions to 97.5%
of functions, which is pretty good for 36 lines of tests.
Mithun Cy, reviewing by Amit Kapila and Álvaro Herrera
It's not good for an inherited child constraint to be marked connoinherit;
that would result in the constraint not propagating to grandchild tables,
if any are created later. The code mostly prevented this from happening
but there was one case that was missed.
This is somewhat related to commit e55a946a8, which also tightened checks
on constraint merging. Hence, back-patch to 9.2 like that one. This isn't
so much because there's a concrete feature-related reason to stop there,
as to avoid having more distinct behaviors than we have to in this area.
Amit Langote
Discussion: <b28ee774-7009-313d-dd55-5bdd81242c41@lab.ntt.co.jp>
Commit 0b62fd036 did a fairly sloppy job of refactoring setPath()
to support jsonb_insert() along with jsonb_set(). In its defense,
though, there was no regression test case exercising the case of
replacing an existing element in a jsonb array.
Per bug #14366 from Peng Sun. Back-patch to 9.6 where bug was introduced.
Report: <20161012065349.1412.47858@wrigleys.postgresql.org>
Upcoming changes to the hash table code used, among others, for grouping
and set operations will change the output order for a few queries. To
make it less likely that actual bugs are hidden between regression test
ordering changes, and to make the tests robust against platform
dependant ordering, add ORDER BYs guaranteeing the output order.
As it's possible that some of the changes expose platform dependant
ordering, push this earlier, to let the buildfarm shake out potentially
unstable results.
Discussion: <20160727004333.r3e2k2y6fvk2ntup@alap3.anarazel.de>
The transfunction was told that its first argument and result were
of the window function output type, not the aggregate state type.
This'd only matter if the transfunction consults get_fn_expr_argtype,
which typically only polymorphic functions would do.
Although we have several regression tests around polymorphic aggs,
none of them detected this mistake --- in fact, they still didn't
fail when I injected the same mistake into nodeAgg.c. So add some
more tests covering both plain agg and window-function-agg cases.
Per report from Sebastian Luque. Back-patch to 9.6 where the error
was introduced (by sloppy refactoring in commit 804163bc2, looks like).
Report: <87int2qkat.fsf@gmail.com>
Historically, we've allowed users to add a CHECK constraint to a child
table and then add an identical CHECK constraint to the parent. This
results in "merging" the two constraints so that the pre-existing
child constraint ends up with both conislocal = true and coninhcount > 0.
However, if you tried to do it in the other order, you got a duplicate
constraint error. This is problematic for pg_dump, which needs to issue
separated ADD CONSTRAINT commands in some cases, but has no good way to
ensure that the constraints will be added in the required order.
And it's more than a bit arbitrary, too. The goal of complaining about
duplicated ADD CONSTRAINT commands can be served if we reject the case of
adding a constraint when the existing one already has conislocal = true;
but if it has conislocal = false, let's just make the ADD CONSTRAINT set
conislocal = true. In this way, either order of adding the constraints
has the same end result.
Another problem was that the code allowed creation of a parent constraint
marked convalidated that is merged with a child constraint that is
!convalidated. In this case, an inheritance scan of the parent table could
emit some rows violating the constraint condition, which would be an
unexpected result given the marking of the parent constraint as validated.
Hence, forbid merging of constraints in this case. (Note: valid child and
not-valid parent seems fine, so continue to allow that.)
Per report from Benedikt Grundmann. Back-patch to 9.2 where we introduced
possibly-not-valid check constraints. The second bug obviously doesn't
apply before that, and I think the first doesn't either, because pg_dump
only gets into this situation when dealing with not-valid constraints.
Report: <CADbMkNPT-Jz5PRSQ4RbUASYAjocV_KHUWapR%2Bg8fNvhUAyRpxA%40mail.gmail.com>
Discussion: <22108.1475874586@sss.pgh.pa.us>
There were several issues with the old coding:
1. There was a race condition, if two threads opened a connection at the
same time. We used a mutex around SSL_CTX_* calls, but that was not
enough, e.g. if one thread SSL_CTX_load_verify_locations() with one
path, and another thread set it with a different path, before the first
thread got to establish the connection.
2. Opening two different connections, with different sslrootcert settings,
seemed to fail outright with "SSL error: block type is not 01". Not sure
why.
3. We created the SSL object, before calling SSL_CTX_load_verify_locations
and SSL_CTX_use_certificate_chain_file on the SSL context. That was
wrong, because the options set on the SSL context are propagated to the
SSL object, when the SSL object is created. If they are set after the
SSL object has already been created, they won't take effect until the
next connection. (This is bug #14329)
At least some of these could've been fixed while still using a shared
context, but it would've been more complicated and error-prone. To keep
things simple, let's just use a separate SSL context for each connection,
and accept the overhead.
Backpatch to all supported versions.
Report, analysis and test case by Kacper Zuk.
Discussion: <20160920101051.1355.79453@wrigleys.postgresql.org>
Windows apparently has a constant named WAIT_TIMEOUT, and some of these
other names are pretty generic, too. Insert "PG_" at the front of each
name in order to disambiguate.
Michael Paquier
WaitLatch, WaitLatchOrSocket, and WaitEventSetWait now taken an
additional wait_event_info parameter; legal values are defined in
pgstat.h. This makes it possible to uniquely identify every point in
the core code where we are waiting for a latch; extensions can pass
WAIT_EXTENSION.
Because latches were the major wait primitive not previously covered
by this patch, it is now possible to see information in
pg_stat_activity on a large number of important wait events not
previously addressed, such as ClientRead, ClientWrite, and SyncRep.
Unfortunately, many of the wait events added by this patch will fail
to appear in pg_stat_activity because they're only used in background
processes which don't currently appear in pg_stat_activity. We should
fix this either by creating a separate view for such information, or
else by deciding to include them in pg_stat_activity after all.
Michael Paquier and Robert Haas, reviewed by Alexander Korotkov and
Thomas Munro.
Attempting to COPY a subset of columns from a table with RLS enabled
would fail due to an invalid query being constructed (using a single
ColumnRef with the list of fields to exact in 'fields', but that's for
the different levels of an indirection for a single column, not for
specifying multiple columns).
Correct by building a ColumnRef and then RestTarget for each column
being requested and then adding those to the targetList for the select
query. Include regression tests to hopefully catch if this is broken
again in the future.
Patch-By: Adam Brightwell
Reviewed-By: Michael Paquier
The sequence "configure; cd src/pl/plpython; make -j" failed due to
trying to compile plpython's .o files before the generated headers
finished building. (This is an important real-world case, since it's
the typical second step when building both plpython2 and plpython3.)
This happens because the submake-generated-headers target is not
placed in a way to make it a prerequisite to compiling the .o files.
Fix that.
Checking other uses of submake-generated-headers, I noted that the one
attached to pg_regress was similarly misplaced; but it's actually not
needed at all for pg_regress.o, rather regress.o, so move it to be a
prerequisite of that.
Back-patch to 9.6 where submake-generated-headers was introduced
(by commit 548af97fc). It's not immediately clear to me why the
previous coding didn't have the same issue; but since we've not
had field reports of plpython make failing, leave it alone in the
older branches.
Pavel Raiskup and Tom Lane
Discussion: <1925924.izSMJEZO3x@unused-4-107.brq.redhat.com>
Before pg_regress runs psql, set the application name to the test name.
Similarly, set the application name to the test file name in the TAP
tests. Also, set a default log_line_prefix that show the application
name, as well as the PID and a time stamp.
That way, the server log output can be correlated to the test input
files, making debugging a bit easier.
Historically, something like to_date('2009-06-40','YYYY-MM-DD') would
return '2009-07-10' because there was no prohibition on out-of-range
month or day numbers. This has been widely panned, and it also turns
out that Oracle throws an error in such cases. Since these functions
are nominally Oracle-compatibility features, let's change that.
There's no particular restriction on year (modulo the fact that the
scanner may not believe that more than 4 digits are year digits,
a matter to be addressed separately if at all). But we now check month,
day, hour, minute, second, and fractional-second fields, as well as
day-of-year and second-of-day fields if those are used.
Currently, no checks are made on ISO-8601-style week numbers or day
numbers; it's not very clear what the appropriate rules would be there,
and they're probably so little used that it's not worth sweating over.
Artur Zakirov, reviewed by Amul Sul, further adjustments by me
Discussion: <1873520224.1784572.1465833145330.JavaMail.yahoo@mail.yahoo.com>
See-Also: <57786490.9010201@wars-nicht.de>
Pushing an upper-level restriction clause into an unflattened
subquery-in-FROM is okay when the subquery contains no SRFs in its
targetlist, or when it does but the SRFs are unreferenced by the clause
*and the clause is not volatile*. Otherwise, we're changing the number
of times the clause is evaluated, which is bad for volatile quals, and
possibly changing the result, since a volatile qual might succeed for some
SRF output rows and not others despite not referencing any of the changing
columns. (Indeed, if the clause is something like "random() > 0.5", the
user is probably expecting exactly that behavior.)
We had most of these restrictions down, but not the one about the upper
clause not being volatile. Fix that, and add a regression test to
illustrate the expected behavior.
Although this is definitely a bug, it doesn't seem like back-patch
material, since possibly some users don't realize that the broken
behavior is broken and are relying on what happens now. Also, while
the added test is quite cheap in the wake of commit a4c35ea1c, it would
be much more expensive (or else messier) in older branches.
Per report from Tom van Tilburg.
Discussion: <CAP3PPDiucxYCNev52=YPVkrQAPVF1C5PFWnrQPT7iMzO1fiKFQ@mail.gmail.com>
<sys/select.h> is required by POSIX.1-2001 to get the prototype of
select(2), but nearly no systems enforce that because older standards
let you get away with including some other headers. Recent OpenBSD
hacking has removed that frail touch of friendliness, however, which
broke some compiles; fix all the way back to 9.1 by adding the required
standard. Only vacuumdb.c was reported to fail, but it seems easier to
fix the whole lot in a fell swoop.
Per bug #14334 by Sean Farrell.
We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
When configured with --enable-tap-tests, "make install" will now install
the Perl support files for TAP testing where PGXS will find them.
This allows extensions to rely on $(prove_check) even when being built
out-of-tree. Back-patch to 9.4 where we first started to support TAP
testing, to reduce the number of cases extension makefiles need to
consider.
Craig Ringer
Discussion: <CAMsr+YFXv+2qne6xJW7z_25mYBtktRX5rpkrgrb+DRgQ_FxgHQ@mail.gmail.com>
ExecInitCteScan supposed that it didn't have to do anything to the extra
tuplestore read pointer it gets from tuplestore_alloc_read_pointer.
However, it needs this read pointer to be positioned at the start of the
tuplestore, while tuplestore_alloc_read_pointer is actually defined as
cloning the current position of read pointer 0. In normal situations
that accidentally works because we initialize the whole plan tree at once,
before anything gets read. But it fails in an EvalPlanQual recheck, as
illustrated in bug #14328 from Dima Pavlov. To fix, just forcibly rewind
the pointer after tuplestore_alloc_read_pointer. The cost of doing so is
negligible unless the tuplestore is already in TSS_READFILE state, which
wouldn't happen in normal cases. We could consider altering tuplestore's
API to make that case cheaper, but that would make for a more invasive
back-patch and it doesn't seem worth it.
This has been broken probably for as long as we've had CTEs, so back-patch
to all supported branches.
Discussion: <32468.1474548308@sss.pgh.pa.us>
Add tests for consistent support of connection strings in frontend
programs as well as proper handling of unusual characters in database
and user names. These tests were developed for the issues of
CVE-2016-5424.
To allow testing of names with spaces, change the pg_regress
command-line options --create-role and --dbname to split their arguments
by comma only, not space or comma as before. Only commas were actually
used in existing uses.
Noah Misch, Michael Paquier, Peter Eisentraut
Consistently print the test name, not the full command, which can be
quite lenghty and include temporary directory names and other
distracting details.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Changes needed to build at all:
- Check for SSL_new in configure, now that SSL_library_init is a macro.
- Do not access struct members directly. This includes some new code in
pgcrypto, to use the resource owner mechanism to ensure that we don't
leak OpenSSL handles, now that we can't embed them in other structs
anymore.
- RAND_SSLeay() -> RAND_OpenSSL()
Changes that were needed to silence deprecation warnings, but were not
strictly necessary:
- RAND_pseudo_bytes() -> RAND_bytes().
- SSL_library_init() and OpenSSL_config() -> OPENSSL_init_ssl()
- ASN1_STRING_data() -> ASN1_STRING_get0_data()
- DH_generate_parameters() -> DH_generate_parameters()
- Locking callbacks are not needed with OpenSSL 1.1.0 anymore. (Good
riddance!)
Also change references to SSLEAY_VERSION_NUMBER with OPENSSL_VERSION_NUMBER,
for the sake of consistency. OPENSSL_VERSION_NUMBER has existed since time
immemorial.
Fix SSL test suite to work with OpenSSL 1.1.0. CA certificates must have
the "CA:true" basic constraint extension now, or OpenSSL will refuse them.
Regenerate the test certificates with that. The "openssl" binary, used to
generate the certificates, is also now more picky, and throws an error
if an X509 extension is specified in "req_extensions", but that section
is empty.
Backpatch to all supported branches, per popular demand. In back-branches,
we still support OpenSSL 0.9.7 and above. OpenSSL 0.9.6 should still work
too, but I didn't test it. In master, we only support 0.9.8 and above.
Patch by Andreas Karlsson, with additional changes by me.
Discussion: <20160627151604.GD1051@msg.df7cb.de>
The money type input function did not have any overflow checks at all.
There were some regression tests that purported to check for overflow,
but they actually checked for the overflow behavior of the int8 type
before casting to money. Remove those unnecessary checks and add some
that actually check the money input function.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
Teach the parser to reject misplaced set-returning functions during parse
analysis using p_expr_kind, in much the same way as we do for aggregates
and window functions (cf commit eaccfded9). While this isn't complete
(it misses nesting-based restrictions), it's much better than the previous
error reporting for such cases, and it allows elimination of assorted
ad-hoc expression_returns_set() error checks. We could add nesting checks
later if it seems important to catch all cases at parse time.
There is one case the parser will now throw error for although previous
versions allowed it, which is SRFs in the tlist of an UPDATE. That never
behaved sensibly (since it's ill-defined which generated row should be
used to perform the update) and it's hard to see why it should not be
treated as an error. It's a release-note-worthy change though.
Also, add a new Query field hasTargetSRFs reporting whether there are
any SRFs in the targetlist (including GROUP BY/ORDER BY expressions).
The parser can now set that basically for free during parse analysis,
and we can use it in a number of places to avoid expression_returns_set
searches. (There will be more such checks soon.) In some places, this
allows decontorting the logic since it's no longer expensive to check for
SRFs in the tlist --- so I made the checks parallel to the handling of
hasAggs/hasWindowFuncs wherever it seemed appropriate.
catversion bump because adding a Query field changes stored rules.
Andres Freund and Tom Lane
Discussion: <24639.1473782855@sss.pgh.pa.us>
The output of the function changes whenever previous (or, as in this
case, concurrent) tests leave a table in place. That causes unneeded
churn.
This should fix failures due to the tests added bfe16d1a5, like on
lapwing, caused by the tsrf test running concurrently with misc. Those
could also have been addressed by using temp tables, but that test has
annoyed me before.
Discussion: <27626.1473729905@sss.pgh.pa.us>
We're considering changing the implementation of targetlist SRFs
considerably, and a lot of the current behaviour isn't tested in our
regression tests. Thus it seems useful to increase coverage to avoid
accidental behaviour changes.
It's quite possible that some of the plans here will require adjustments
to avoid falling afoul of ordering differences (e.g. hashed group
bys). The buildfarm will tell us.
Reviewed-By: Tom Lane
Discussion: <20160827214829.zo2dfb5jaikii5nw@alap3.anarazel.de>
When heap_lock_tuple decides to follow the update chain, it tried to
also lock any version of the tuple that was created by an update that
was subsequently rolled back. This is pointless, since for all intents
and purposes that tuple exists no more; and moreover it causes
misbehavior, as reported independently by Marko Tiikkaja and Marti
Raudsepp: some SELECT FOR UPDATE/SHARE queries may fail to return
the tuples, and assertion-enabled builds crash.
Fix by having heap_lock_updated_tuple test the xmin and return success
immediately if the tuple was created by an aborted transaction.
The condition where tuples become invisible occurs when an updated tuple
chain is followed by heap_lock_updated_tuple, which reports the problem
as HeapTupleSelfUpdated to its caller heap_lock_tuple, which in turn
propagates that code outwards possibly leading the calling code
(ExecLockRows) to believe that the tuple exists no longer.
Backpatch to 9.3. Only on 9.5 and newer this leads to a visible
failure, because of commit 27846f02c176; before that, heap_lock_tuple
skips the whole dance when the tuple is already locked by the same
transaction, because of the ancient HeapTupleSatisfiesUpdate behavior.
Still, the buggy condition may also exist in more convoluted scenarios
involving concurrent transactions, so it seems safer to fix the bug in
the old branches too.
Discussion:
https://www.postgresql.org/message-id/CABRT9RC81YUf1=jsmWopcKJEro=VoeG2ou6sPwyOUTx_qteRsg@mail.gmail.comhttps://www.postgresql.org/message-id/48d3eade-98d3-8b9a-477e-1a8dc32a724d@joh.to
commit_ts and test_pg_dump were declaring targets before including the
PGXS stanza, which meant that the "all" target customarily defined as
the first (and therefore default target) was not the default anymore.
Fix that by moving those target definitions to after PGXS.
commit_ts was initially good, but I broke it in commit 9def031bd2;
test_pg_dump was born broken, probably copying from commit_ts' mistake.
In passing, fix a comment mistake in test_pg_dump/Makefile.
Backpatch to 9.6.
Noted by Tom Lane.
Previously, if a schema was created by an extension, a normal pg_dump run
(not --binary-upgrade) would summarily skip every object in that schema.
In a case where an extension creates a schema and then users create other
objects within that schema, this does the wrong thing: we want pg_dump
to skip the schema but still create the non-extension-owned objects.
There's no easy way to fix this pre-9.6, because in earlier versions the
"dump" status for a schema is just a bool and there's no way to distinguish
"dump me" from "dump my members". However, as of 9.6 we do have enough
state to represent that, so this is a simple correction of the logic in
selectDumpableNamespace.
In passing, make some cosmetic fixes in nearby code.
Martín Marqués, reviewed by Michael Paquier
Discussion: <99581032-71de-6466-c325-069861f1947d@2ndquadrant.com>
Not much to be said about this patch: it does what it says on the tin.
In passing, rename AlterEnumStmt.skipIfExists to skipIfNewValExists
to clarify what it actually does. In the discussion of this patch
we considered supporting other similar options, such as IF EXISTS
on the type as a whole or IF NOT EXISTS on the target name. This
patch doesn't actually add any such feature, but it might happen later.
Dagfinn Ilmari Mannsåker, reviewed by Emre Hasegeli
Discussion: <CAO=2mx6uvgPaPDf-rHqG8=1MZnGyVDMQeh8zS4euRyyg4D35OQ@mail.gmail.com>
Previously, we failed to recognize Unicode characters above U+7FF as
being members of locale-dependent character classes such as [[:alpha:]].
(Actually, the same problem occurs for large pg_wchar values in any
multibyte encoding, but UTF8 is the only case people have actually
complained about.) It's impractical to get Spencer's original code to
handle character classes or ranges containing many thousands of characters,
because it insists on considering each member character individually at
regex compile time, whether or not the character will ever be of interest
at run time. To fix, choose a cutoff point MAX_SIMPLE_CHR below which
we process characters individually as before, and deal with entire ranges
or classes as single entities above that. We can actually make things
cheaper than before for chars below the cutoff, because the color map can
now be a simple linear array for those chars, rather than the multilevel
tree structure Spencer designed. It's more expensive than before for
chars above the cutoff, because we must do a binary search in a list of
high chars and char ranges used in the regex pattern, plus call iswalpha()
and friends for each locale-dependent character class used in the pattern.
However, multibyte encodings are normally designed to give smaller codes
to popular characters, so that we can expect that the slow path will be
taken relatively infrequently. In any case, the speed penalty appears
minor except when we have to apply iswalpha() etc. to high character codes
at runtime --- and the previous coding gave wrong answers for those cases,
so whether it was faster is moot.
Tom Lane, reviewed by Heikki Linnakangas
Discussion: <15563.1471913698@sss.pgh.pa.us>
To prevent possibly breaking indexes on enum columns, we must keep
uncommitted enum values from getting stored in tables, unless we
can be sure that any such column is new in the current transaction.
Formerly, we enforced this by disallowing ALTER TYPE ... ADD VALUE
from being executed at all in a transaction block, unless the target
enum type had been created in the current transaction. This patch
removes that restriction, and instead insists that an uncommitted enum
value can't be referenced unless it belongs to an enum type created
in the same transaction as the value. Per discussion, this should be
a bit less onerous. It does require each function that could possibly
return a new enum value to SQL operations to check this restriction,
but there aren't so many of those that this seems unmaintainable.
Andrew Dunstan and Tom Lane
Discussion: <4075.1459088427@sss.pgh.pa.us>
When pg_logical_slot_get_changes(...) sets confirmed_flush_lsn to the point at
which replay stopped, it doesn't dirty the replication slot. So if the replay
didn't cause restart_lsn or catalog_xmin to change as well, this change will
not get written out to disk. Even on a clean shutdown.
If Pg crashes or restarts, a subsequent pg_logical_slot_get_changes(...) call
will see the same changes already replayed since it uses the slot's
confirmed_flush_lsn as the start point for fetching changes. The caller can't
specify a start LSN when using the SQL interface.
Mark the slot as dirty after reading changes using the SQL interface so that
users won't see repeated changes after a clean shutdown. Repeated changes still
occur when using the walsender interface or after an unclean shutdown.
Craig Ringer
After further reflection about the mess cleaned up in commit 39b691f25,
I decided the main bit of test coverage that was still missing was to
check that the non-default abbreviation-set files we supply are usable.
Add that.
Back-patch to supported branches, just because it seems like a good
idea to keep this all in sync.
split_to_stringlist() doesn't modify its first argument nor expect it
to remain valid after exit, so there's no need to duplicate the optarg
string at the call sites. Per Coverity. (This has been wrong all along,
but commit 052cc223d changed the useless calls from "strdup" to
"pg_strdup", which apparently made Coverity think it's a new bug.
It's not, but it's also not worth back-patching.)
Previously, we threw an error if a dynamic timezone abbreviation did not
match any abbreviation recorded in the referenced IANA time zone entry.
That seemed like a good consistency check at the time, but it turns out
that a number of the abbreviations in the IANA database are things that
Olson and crew made up out of whole cloth. Their current policy is to
remove such names in favor of using simple numeric offsets. Perhaps
unsurprisingly, a lot of these made-up abbreviations have varied in meaning
over time, which meant that our commit b2cbced9e and later changes made
them into dynamic abbreviations. So with newer IANA database versions
that don't mention these abbreviations at all, we fail, as reported in bug
#14307 from Neil Anderson. It's worse than just a few unused-in-the-wild
abbreviations not working, because the pg_timezone_abbrevs view stops
working altogether (since its underlying function tries to compute the
whole view result in one call).
We considered deleting these abbreviations from our abbreviations list, but
the problem with that is that we can't stay ahead of possible future IANA
changes. Instead, let's leave the abbreviations list alone, and treat any
"orphaned" dynamic abbreviation as just meaning the referenced time zone.
It will behave a bit differently than it used to, in that you can't any
longer override the zone's standard vs. daylight rule by using the "wrong"
abbreviation of a pair, but that's better than failing entirely. (Also,
this solution can be interpreted as adding a small new feature, which is
that any abbreviation a user wants can be defined as referencing a time
zone name.)
Back-patch to all supported branches, since this problem affects all
of them when using tzdata 2016f or newer.
Report: <20160902031551.15674.67337@wrigleys.postgresql.org>
Discussion: <6189.1472820913@sss.pgh.pa.us>
This introduces a numeric sum accumulator, which performs better than
repeatedly calling add_var(). The performance comes from using wider digits
and delaying carry propagation, tallying positive and negative values
separately, and avoiding a round of palloc/pfree on every value. This
speeds up SUM(), as well as other standard aggregates like AVG() and
STDDEV() that also calculate a sum internally.
Reviewed-by: Andrey Borodin
Discussion: <c0545351-a467-5b76-6d46-4840d1ea8aa4@iki.fi>
Where possible, use palloc or pg_malloc instead; otherwise, insert
explicit NULL checks.
Generally speaking, these are places where an actual OOM is quite
unlikely, either because they're in client programs that don't
allocate all that much, or they're very early in process startup
so that we'd likely have had a fork() failure instead. Hence,
no back-patch, even though this is nominally a bug fix.
Michael Paquier, with some adjustments by me
Discussion: <CAB7nPqRu07Ot6iht9i9KRfYLpDaF2ZuUv5y_+72uP23ZAGysRg@mail.gmail.com>
Commit f0c7b789a added a test case in case.sql that creates and then drops
both an '=' operator and the type it's for. Given the right timing, that
can cause a "cache lookup failed for type" failure in concurrent sessions,
which see the '=' operator as a potential match for '=' in a query, but
then the type is gone by the time they inquire into its properties.
It might be nice to make that behavior more robust someday, but as a
back-patchable solution, adjust the new test case so that the operator
is never visible to other sessions. Like the previous commit, back-patch
to all supported branches.
Discussion: <5983.1471371667@sss.pgh.pa.us>
ExecReScanAgg's check for whether it could re-use a previously calculated
hashtable neglected the possibility that the Agg node might reference
PARAM_EXEC Params that are not referenced by its input plan node. That's
okay if the Params are in upper tlist or qual expressions; but if one
appears in aggregate input expressions, then the hashtable contents need
to be recomputed when the Param's value changes.
To avoid unnecessary performance degradation in the case of a Param that
isn't within an aggregate input, add logic to the planner to determine
which Params are within aggregate inputs. This requires a new field in
struct Agg, but fortunately we never write plans to disk, so this isn't
an initdb-forcing change.
Per report from Jeevan Chalke. This has been broken since forever,
so back-patch to all supported branches.
Andrew Gierth, with minor adjustments by me
Report: <CAM2+6=VY8ykfLT5Q8vb9B6EbeBk-NGuLbT6seaQ+Fq4zXvrDcA@mail.gmail.com>
This seems to offer significantly better search performance than the
existing GiST opclass for inet/cidr, at least on data with a wide mix
of network mask lengths. (That may suggest that the data splitting
heuristics in the GiST opclass could be improved.)
Emre Hasegeli, with mostly-cosmetic adjustments by me
Discussion: <CAE2gYzxtth9qatW_OAqdOjykS0bxq7AYHLuyAQLPgT7H9ZU0Cw@mail.gmail.com>
Add a variant of txid_current() that returns NULL if no transaction ID
is assigned. This version can be used even on a standby server,
although it will always return NULL since no transaction IDs can be
assigned during recovery.
Craig Ringer, per suggestion from Jim Nasby. Reviewed by Petr Jelinek
and by me.
Remove the plpgsql wrapping that hides the context. So now the test
will fail if the work doesn't actually happen in a parallel worker. Run
the test in its own test group to ensure it won't run out of resources
for that.
In particular, left join to pg_authid so that rows in pg_stat_activity
don't disappear if the session's owning user has been dropped.
Also convert a few joins to pg_database to left joins, in the same spirit,
though that case might be harder to hit. We were doing this in other
views already, so it was a bit inconsistent that these views didn't.
Oskari Saarenmaa, with some further tweaking by me
Discussion: <56E87CD8.60007@ohmu.fi>
On some buildfarm animals the isolationtest added in 07ef0351 failed, as
the order in which processes are run after unlocking is not
guaranteed. Add an alternative output for that.
Discussion: <7969.1471484738@sss.pgh.pa.us>
Backpatch: 9.6, like the test in the aforementioned commit
INSERT .. ON CONFLICT runs a pre-check of the possible conflicting
constraints before performing the actual speculative insertion. In case
the inserted tuple included TOASTed columns the ON CONFLICT condition
would be handled correctly in case the conflict was caught by the
pre-check, but if two transactions entered the speculative insertion
phase at the same time, one would have to re-try, and the code for
aborting a speculative insertion did not handle deleting the
speculatively inserted TOAST datums correctly.
TOAST deletion would fail with "ERROR: attempted to delete invisible
tuple" as we attempted to remove the TOAST tuples using
simple_heap_delete which reasoned that the given tuples should not be
visible to the command that wrote them.
This commit updates the heap_abort_speculative() function which aborts
the conflicting tuple to use itself, via toast_delete, for deleting
associated TOAST datums. Like before, the inserted toast rows are not
marked as being speculative.
This commit also adds a isolationtester spec test, exercising the
relevant code path. Unfortunately 9.5 cannot handle two waiting
sessions, and thus cannot execute this test.
Reported-By: Viren Negi, Oskari Saarenmaa
Author: Oskari Saarenmaa, edited a bit by me
Bug: #14150
Discussion: <20160519123338.12513.20271@wrigleys.postgresql.org>
Backpatch: 9.5, where ON CONFLICT was introduced
regexp_match() is like regexp_matches(), but it disallows the 'g' flag
and in consequence does not need to return a set. Instead, it returns
a simple text array value, or NULL if there's no match. Previously people
usually got that behavior with a sub-select, but this way is considerably
more efficient.
Documentation adjusted so that regexp_match() is presented first and then
regexp_matches() is introduced as a more complicated version. This is
a bit historically revisionist but seems pedagogically better.
Still TODO: extend contrib/citext to support this function.
Emre Hasegeli, reviewed by David Johnston
Discussion: <CAE2gYzy42sna2ME_e3y1KLQ-4UBrB-eVF0SWn8QG39sQSeVhEw@mail.gmail.com>
We implement a dozen or so parameterless functions that the SQL standard
defines special syntax for. Up to now, that was done by converting them
into more or less ad-hoc constructs such as "'now'::text::date". That's
messy for multiple reasons: it exposes what should be implementation
details to users, and performance is worse than it needs to be in several
cases. To improve matters, invent a new expression node type
SQLValueFunction that can represent any of these parameterless functions.
Bump catversion because this changes stored parsetrees for rules.
Discussion: <30058.1463091294@sss.pgh.pa.us>
NUMERIC_MAX_PRECISION is a purely arbitrary constraint on the precision
and scale you can write in a numeric typmod. It might once have had
something to do with the allowed range of a typmod-less numeric value,
but at least since 9.1 we've allowed, and documented that we allowed,
any value that would physically fit in the numeric storage format;
which is something over 100000 decimal digits, not 1000.
Hence, get rid of numeric_in()'s use of NUMERIC_MAX_PRECISION as a limit
on the allowed range of the exponent in scientific-format input. That was
especially silly in view of the fact that you can enter larger numbers as
long as you don't use 'e' to do it. Just constrain the value enough to
avoid localized overflow, and let make_result be the final arbiter of what
is too large. Likewise adjust ecpg's equivalent of this code.
Also get rid of numeric_recv()'s use of NUMERIC_MAX_PRECISION to limit the
number of base-NBASE digits it would accept. That created a dump/restore
hazard for binary COPY without doing anything useful; the wire-format
limit on number of digits (65535) is about as tight as we would want.
In HEAD, also get rid of pg_size_bytes()'s unnecessary intimacy with what
the numeric range limit is. That code doesn't exist in the back branches.
Per gripe from Aravind Kumar. Back-patch to all supported branches,
since they all contain the documentation claim about allowed range of
NUMERIC (cf commit cabf5d84b).
Discussion: <2895.1471195721@sss.pgh.pa.us>
Per discussion, we should provide such functions to replace the lost
ability to discover AM properties by inspecting pg_am (cf commit
65c5fcd35). The added functionality is also meant to displace any code
that was looking directly at pg_index.indoption, since we'd rather not
believe that the bit meanings in that field are part of any client API
contract.
As future-proofing, define the SQL API to not assume that properties that
are currently AM-wide or index-wide will remain so unless they logically
must be; instead, expose them only when inquiring about a specific index
or even specific index column. Also provide the ability for an index
AM to override the behavior.
In passing, document pg_am.amtype, overlooked in commit 473b93287.
Andrew Gierth, with kibitzing by me and others
Discussion: <87mvl5on7n.fsf@news-spur.riddles.org.uk>
Commit 874fe3aea changed the command tag returned for CREATE MATVIEW/CREATE
TABLE AS ... WITH NO DATA, but missed that there was code in spi.c that
expected the command tag to always be "SELECT". Fortunately, the
consequence was only an Assert failure, so this oversight should have no
impact in production builds.
Since this code path was evidently un-exercised, add a regression test.
Per report from Shivam Saxena. Back-patch to 9.3, like the previous commit.
Michael Paquier
Report: <97218716-480B-4527-B5CD-D08D798A0C7B@dresources.com>
ExecEvalCase() tried to save a cycle or two by passing
&econtext->caseValue_isNull as the isNull argument to its sub-evaluation of
the CASE value expression. If that subexpression itself contained a CASE,
then *isNull was an alias for econtext->caseValue_isNull within the
recursive call of ExecEvalCase(), leading to confusion about whether the
inner call's caseValue was null or not. In the worst case this could lead
to a core dump due to dereferencing a null pointer. Fix by not assigning
to the global variable until control comes back from the subexpression.
Also, avoid using the passed-in isNull pointer transiently for evaluation
of WHEN expressions. (Either one of these changes would have been
sufficient to fix the known misbehavior, but it's clear now that each of
these choices was in itself dangerous coding practice and best avoided.
There do not seem to be any similar hazards elsewhere in execQual.c.)
Also, it was possible for inlining of a SQL function that implements the
equality operator used for a CASE comparison to result in one CASE
expression's CaseTestExpr node being inserted inside another CASE
expression. This would certainly result in wrong answers since the
improperly nested CaseTestExpr would be caused to return the inner CASE's
comparison value not the outer's. If the CASE values were of different
data types, a crash might result; moreover such situations could be abused
to allow disclosure of portions of server memory. To fix, teach
inline_function to check for "bare" CaseTestExpr nodes in the arguments of
a function to be inlined, and avoid inlining if there are any.
Heikki Linnakangas, Michael Paquier, Tom Lane
Report: https://github.com/greenplum-db/gpdb/pull/327
Report: <4DDCEEB8.50602@enterprisedb.com>
Security: CVE-2016-5423
In arguments, these meta-commands wrongly treated each pair as closing
the double quoted string. Make the behavior match the documentation.
This is a compatibility break, but I more expect to find software with
untested reliance on the documented behavior than software reliant on
today's behavior. Back-patch to 9.1 (all supported versions).
Reviewed by Tom Lane and Peter Eisentraut.
Security: CVE-2016-5424
This is required for the result to be a legal tsvector value.
Noted while fooling with Andreas Seltenreich's ts_delete() crash.
Discussion: <87invhoj6e.fsf@credativ.de>
Such cases either failed an Assert, or produced a corrupt tsvector in
non-Assert builds, as reported by Andreas Seltenreich. The reason is
that tsvector_delete_by_indices() just assumed that its input array had
no duplicates. Fix by explicitly de-duping.
In passing, improve some comments, and fix a number of tests for null
values to use ERRCODE_NULL_VALUE_NOT_ALLOWED not
ERRCODE_INVALID_PARAMETER_VALUE.
Discussion: <87invhoj6e.fsf@credativ.de>
Previously, if an INSERT with multiple rows of VALUES had indirection
(array subscripting or field selection) in its target-columns list, the
parser handled that by applying transformAssignedExpr() to each element
of each VALUES row independently. This led to having ArrayRef assignment
nodes or FieldStore nodes in each row of the VALUES RTE. That works for
simple cases, but in bug #14265 Nuri Boardman points out that it fails
if there are multiple assignments to elements/fields of the same target
column. For such cases to work, rewriteTargetListIU() has to nest the
ArrayRefs or FieldStores together to produce a single expression to be
assigned to the column. But it failed to find them in the top-level
targetlist and issued an error about "multiple assignments to same column".
We could possibly fix this by teaching the rewriter to apply
rewriteTargetListIU to each VALUES row separately, but that would be messy
(it would change the output rowtype of the VALUES RTE, for example) and
inefficient. Instead, let's fix the parser so that the VALUES RTE outputs
are just the user-specified values, cast to the right type if necessary,
and then the ArrayRefs or FieldStores are applied in the top-level
targetlist to Vars representing the RTE's outputs. This is the same
parsetree representation already used for similar cases with INSERT/SELECT
syntax, so it allows simplifications in ruleutils.c, which no longer needs
to treat INSERT-from-multiple-VALUES as its own special case.
This implementation works by applying transformAssignedExpr to the VALUES
entries as before, and then stripping off any ArrayRefs or FieldStores it
adds. With lots of VALUES rows it would be noticeably more efficient to
not add those nodes in the first place. But that's just an optimization
not a bug fix, and there doesn't seem to be any good way to do it without
significant refactoring. (A non-invasive answer would be to apply
transformAssignedExpr + stripping to just the first VALUES row, and then
just forcibly cast remaining rows to the same data types exposed in the
first row. But this way would lead to different, not-INSERT-specific
errors being reported in casting failure cases, so it doesn't seem very
nice.) So leave that for later; this patch at least isn't making the
per-row parsing work worse, and it does make the finished parsetree
smaller, saving rewriter and planner work.
Catversion bump because stored rules containing such INSERTs would need
to change. Because of that, no back-patch, even though this is a very
long-standing bug.
Report: <20160727005725.7438.26021@wrigleys.postgresql.org>
Discussion: <9578.1469645245@sss.pgh.pa.us>
In test 001_stream_rep we're using pg_stat_replication.write_location to
determine catch-up status, but we care about xlog having been applied
not just received, so change that to apply_location.
In test 003_recovery_targets, we query the database for a recovery
target specification and later for the xlog position supposedly
corresponding to that recovery specification. If for whatever reason
more WAL is written between the two queries, the recovery specification
is earlier than the xlog position used by the query in the test harness,
so we wait forever, leading to test failures. Deal with this by using a
single query to extract both items. In 2a0f89cd71 we tried to deal
with it by giving them more tests to run, but in hindsight that was
obviously doomed to failure (no revert of that, though).
Per hamster buildfarm failures.
Author: Michaël Paquier
This coding pattern creates a race condition, because if an interesting
interrupt happens after we've checked InterruptPending but before we reset
our latch, the latch-setting done by the signal handler would get lost,
and then we might block at WaitLatch in the next iteration without ever
noticing the interrupt condition. You can put the CHECK_FOR_INTERRUPTS
before WaitLatch or after ResetLatch, but not between them.
Aside from fixing the bugs, add some explanatory comments to latch.h
to perhaps forestall the next person from making the same mistake.
In HEAD, also replace gather_readnext's direct call of
HandleParallelMessages with CHECK_FOR_INTERRUPTS. It does not seem clean
or useful for this one caller to bypass ProcessInterrupts and go straight
to HandleParallelMessages; not least because that fails to consider the
InterruptPending flag, resulting in useless work both here
(if InterruptPending isn't set) and in the next CHECK_FOR_INTERRUPTS call
(if it is).
This thinko seems to have been introduced in the initial coding of
storage/ipc/shm_mq.c (commit ec9037df2), and then blindly copied into all
the subsequent parallel-query support logic. Back-patch relevant hunks
to 9.4 to extirpate the error everywhere.
Discussion: <1661.1469996911@sss.pgh.pa.us>
With the refactoring of pg_dump to handle components, getOwnedSeqs needs
to be a bit more intelligent regarding which components to dump when.
Specifically, we can't simply use the owning table's components as the
set of components to dump as the table might only be including certain
components while all components of the sequence should be dumped, for
example, when the table is a member of an extension while the sequence
is not.
Handle this by combining the set of components to be dumped for the
sequence explicitly and those to be dumped for the table when setting
the components to be dumped for the sequence.
Also add a number of regression tests around this to, hopefully, catch
any future changes which break the expected behavior.
Discovered by: Philippe BEAUDOIN
Reviewed by: Michael Paquier
Commits 4452000f3 et al established semantics for NullTest.argisrow that
are a bit different from its initial conception: rather than being merely
a cache of whether we've determined the input to have composite type,
the flag now has the further meaning that we should apply field-by-field
testing as per the standard's definition of IS [NOT] NULL. If argisrow
is false and yet the input has composite type, the construct instead has
the semantics of IS [NOT] DISTINCT FROM NULL. Update the comments in
primnodes.h to clarify this, and fix ruleutils.c and deparse.c to print
such cases correctly. In the case of ruleutils.c, this merely results in
cosmetic changes in EXPLAIN output, since the case can't currently arise
in stored rules. However, it represents a live bug for deparse.c, which
would formerly have sent a remote query that had semantics different
from the local behavior. (From the user's standpoint, this means that
testing a remote nested-composite column for null-ness could have had
unexpected recursive behavior much like that fixed in 4452000f3.)
In a related but somewhat independent fix, make plancat.c set argisrow
to false in all NullTest expressions constructed to represent "attnotnull"
constructs. Since attnotnull is actually enforced as a simple null-value
check, this is a more accurate representation of the semantics; we were
previously overpromising what it meant for composite columns, which might
possibly lead to incorrect planner optimizations. (It seems that what the
SQL spec expects a NOT NULL constraint to mean is an IS NOT NULL test, so
arguably we are violating the spec and should fix attnotnull to do the
other thing. If we ever do, this part should get reverted.)
Back-patch, same as the previous commit.
Discussion: <10682.1469566308@sss.pgh.pa.us>
ExecMakeTableFunctionResult(), which is used in SELECT FROM function(...)
cases, formerly treated a simple NULL output from a function that both
returnsSet and returnsTuple as a violation of the SRF protocol. What seems
better is to treat a NULL output as equivalent to ROW(NULL,NULL,...).
Without this, cases such as SELECT FROM unnest(...) on an array of
composite are vulnerable to unexpected and not-very-helpful failures.
Old code comments here suggested an alternative of just ignoring
simple-NULL outputs, but that doesn't seem very principled.
This change had been hung up for a long time due to uncertainty about
how much we wanted to buy into the equivalence of simple NULL and
ROW(NULL,NULL,...). I think that's been mostly resolved by the discussion
around bug #14235, so let's go ahead and do it.
Per bug #7808 from Joe Van Dyk. Although this is a pretty old report,
fixing it smells a bit more like a new feature than a bug fix, and the
lack of other similar complaints suggests that we shouldn't take much risk
of destabilization by back-patching. (Maybe that could be revisited once
this patch has withstood some field usage.)
Andrew Gierth and Tom Lane
Report: <E1TurJE-0006Es-TK@wrigleys.postgresql.org>
Previously, some functions returned various fixed strings and others
failed with a cache lookup error. Per discussion, standardize on
returning NULL. Although user-exposed "cache lookup failed" error
messages might normally qualify for bug-fix treatment, no back-patch;
the risk of breaking user code which is accustomed to the current
behavior seems too high.
Michael Paquier
The SQL standard appears to specify that IS [NOT] NULL's tests of field
nullness are non-recursive, ie, we shouldn't consider that a composite
field with value ROW(NULL,NULL) is null for this purpose.
ExecEvalNullTest got this right, but eval_const_expressions did not,
leading to weird inconsistencies depending on whether the expression
was such that the planner could apply constant folding.
Also, adjust the docs to mention that IS [NOT] DISTINCT FROM NULL can be
used as a substitute test if a simple null check is wanted for a rowtype
argument. That motivated reordering things so that IS [NOT] DISTINCT FROM
is described before IS [NOT] NULL. In HEAD, I went a bit further and added
a table showing all the comparison-related predicates.
Per bug #14235. Back-patch to all supported branches, since it's certainly
undesirable that constant-folding should change the semantics.
Report and patch by Andrew Gierth; assorted wordsmithing and revised
regression test cases by me.
Report: <20160708024746.1410.57282@wrigleys.postgresql.org>
In an example of TAP test scripts, there is the test checking whether
the result of the query is expected or not. But, in previous example,
the exit code of psql instead of the query result was checked unexpectedly.
Author: Ildar Musin
These tests are currently only running in buildfarm member hamster,
which is purposefully very slow. This suite has failed a couple of
times recently because of timeouts, so increase the allowed number of
iterations to avoid spurious failures.
Author: Michaël Paquier
Welsh (cy_GB) apparently sorts 'dd' after 'f', creating problems
analogous to the odd sorting of 'aa' in Danish. Adjust regression
test case to not use data that provokes that.
Jeff Janes
Patch: <CAMkU=1zx-pqcfSApL2pYDQurPOCfcYU0wJorsmY1OrYPiXRbLw@mail.gmail.com>
Some tests added in 9.5 depended on 'aa' sorting before 'bb', which
doesn't hold true in Danish. Use slightly different test data to
avoid the problem.
Jeff Janes
Report: <CAMkU=1w-cEDbA+XHdNb=YS_4wvZbs66Ni9KeSJKAJGNJyOsgQw@mail.gmail.com>
To ensure that "make installcheck" can be used safely against an existing
installation, we need to be careful about what global object names
(database, role, and tablespace names) we use; otherwise we might
accidentally clobber important objects. There's been a weak consensus that
test databases should have names including "regression", and that test role
names should start with "regress_", but we didn't have any particular rule
about tablespace names; and neither of the other rules was followed with
any consistency either.
This commit moves us a long way towards having a hard-and-fast rule that
regression test databases must have names including "regression", and that
test role and tablespace names must start with "regress_". It's not
completely there because I did not touch some test cases in rolenames.sql
that test creation of special role names like "session_user". That will
require some rethinking of exactly what we want to test, whereas the intent
of this patch is just to hit all the cases in which the needed renamings
are cosmetic.
There is no enforcement mechanism in this patch either, but if we don't
add one we can expect that the tests will soon be violating the convention
again. Again, that's not such a cosmetic change and it will require
discussion. (But I did use a quick-hack enforcement patch to find these
cases.)
Discussion: <16638.1468620817@sss.pgh.pa.us>
On second thought, we should probably do at least a minimal check that
the constructed index is valid, since the big problem with the most
recent breakage was not whether the sorting was correct but that the
index had incorrect hash codes placed in it.
We've broken this code path at least twice in the past, so it's prudent
to have a test case that covers it. To allow exercising the code path
without creating a very large (and slow to run) test case, redefine the
sort threshold to be bounded by maintenance_work_mem as well as the number
of available buffers. While at it, fix an ancient oversight that when
building a temp index, the number of available buffers is not NBuffers but
NLocBuffer. Also, if assertions are enabled, apply a direct test that the
sort actually does return the tuples in the expected order.
Peter Geoghegan
Patch: <CAM3SWZTBAo4hjbBd780+MrOKiKp_TMo1N3A0Rw9_im8gbD7fQA@mail.gmail.com>
When key-share locking a tuple that has been not-key-updated, and the
update is a committed transaction, in some cases we raised
serializability errors:
ERROR: could not serialize access due to concurrent update
Because the key-share doesn't conflict with the update, the error is
unnecessary and inconsistent with the case that the update hasn't
committed yet. This causes problems for some usage patterns, even if it
can be claimed that it's sufficient to retry the aborted transaction:
given a steady stream of updating transactions and a long locking
transaction, the long transaction can be starved indefinitely despite
multiple retries.
To fix, we recognize that HeapTupleSatisfiesUpdate can return
HeapTupleUpdated when an updating transaction has committed, and that we
need to deal with that case exactly as if it were a non-committed
update: verify whether the two operations conflict, and if not, carry on
normally. If they do conflict, however, there is a difference: in the
HeapTupleBeingUpdated case we can just sleep until the concurrent
transaction is gone, while in the HeapTupleUpdated case this is not
possible and we must raise an error instead.
Per trouble report from Olivier Dony.
In addition to a couple of test cases that verify the changed behavior,
I added a test case to verify the behavior that remains unchanged,
namely that errors are raised when a update that modifies the key is
used. That must still generate serializability errors. One
pre-existing test case changes behavior; per discussion, the new
behavior is actually the desired one.
Discussion: https://www.postgresql.org/message-id/560AA479.4080807@odoo.comhttps://www.postgresql.org/message-id/20151014164844.3019.25750@wrigleys.postgresql.org
Backpatch to 9.3, where the problem appeared.
Digging around bug #14245 I found that commit
6734a1cacd missed that NOT operation is
right associative in opposite to all other. This miss is resposible for
tsquery parser fail on sequence of NOT operations
During normalization of tsquery tree it tries to simplify nested NOT
operations but there it's obvioulsy missed that subsequent node could be
a leaf node (value node)
Bug #14245: Segfault on weird to_tsquery
Reported by David Kellum.
Dept of second thoughts: given the RESET SESSION AUTHORIZATION that
was just added by commit cec550139, we don't need the reconnection
that used to be here. Might as well buy back a few microseconds.
Test the external-sort code path in CLUSTER for two different scenarios:
multiple-pass external sorting, and the best case for replacement
selection, where only one run is produced, so that no merge is required.
This test would have caught the bug fixed in commit 1b0fc8507, at
least when run with valgrind enabled.
In passing, add a short-circuit test in plan_cluster_use_sort() to make
dead certain that it selects sorting when enable_indexscan is off. As
things stand, that would happen anyway, but it seems like good future
proofing for this test.
Peter Geoghegan
Discussion: <CAM3SWZSgxehDkDMq1FdiW2A0Dxc79wH0hz1x-TnGy=1BXEL+nw@mail.gmail.com>
Change assorted places in our Perl code that did things like
system("prog $path/file");
to do it more like
system('prog', "$path/file");
which is safe against spaces and other special characters in the path
variable. The latter was already the prevailing style, but a few bits
of code hadn't gotten this memo. Back-patch to 9.4 as relevant.
Michael Paquier, Kyotaro Horiguchi
Discussion: <20160704.160213.111134711.horiguchi.kyotaro@lab.ntt.co.jp>
Per discussion on pgsql-hackers, conninfo is better as the column name
because it's more commonly used in PostgreSQL.
Catalog version bumped due to the change of pg_proc.
Author: Michael Paquier
ExecInsertIndexTuples treated an exclusion constraint as subject to
noDupErr processing even when it was not listed in arbiterIndexes, and
would therefore not error out for a conflict in such a constraint, instead
returning it as an arbiter-index failure. That led to an infinite loop in
ExecInsert, since ExecCheckIndexConstraints ignored the index as-intended
and therefore didn't throw the expected error. To fix, make the exclusion
constraint code path use the same condition as the index_insert call does
to decide whether no-error-for-duplicates behavior is appropriate. While
at it, refactor a little bit to avoid unnecessary list_member_oid calls.
(That surely wouldn't save anything worth noticing, but I find the code
a bit clearer this way.)
Per bug report from Heikki Rauhala. Back-patch to 9.5 where ON CONFLICT
was introduced.
Report: <4C976D6B-76B4-434C-8052-D009F7B7AEDA@reaktor.fi>
In commit 915b703e1 I gave get_agg_clause_costs() the responsibility of
marking Aggref nodes with the appropriate aggtranstype. I failed to notice
that where it was being called from, it might see only a subset of the
Aggref nodes that were in the original targetlist. Specifically, if there
are duplicate aggregate calls in the tlist, either make_sort_input_target
or make_window_input_target might put just a single instance into the
grouping_target, and then only that instance would get marked. Fix by
moving the call back into grouping_planner(), before we start building
assorted PathTargets from the query tlist. Per report from Stefan Huehner.
Report: <20160702131056.GD3165@huehner.biz>
In commit 68fa28f77 I tried to teach SS_finalize_plan() to cope with
initPlans attached anywhere in the plan tree, by dint of moving its
handling of those into the recursion in finalize_plan(). It turns out that
that doesn't really work: if a lower-level plan node emits an initPlan
output parameter in its targetlist, it's legitimate for upper levels to
reference those Params --- and at the point where this code runs, those
references look just like the Param itself, so finalize_plan() quite
properly rejects them as being in the wrong place. We could lobotomize
the checks enough to allow that, probably, but then it's not clear that
we'd have any meaningful check for misplaced Params at all. What seems
better, at least in the near term, is to tweak standard_planner() a bit
so that initPlans are never placed anywhere but the topmost plan node
for a query level, restoring the behavior that occurred pre-9.6. Possibly
we can do better if this code is ever merged into setrefs.c: then it would
be possible to check a Param's placement only when we'd failed to replace
it with a Var referencing a child plan node's targetlist.
BTW, I'm now suspicious that finalize_plan is doing the wrong thing by
returning the node's allParam rather than extParam to be incorporated
in the parent node's set of used parameters. However, it makes no
difference given that initPlans only appear at top level, so I'll leave
that alone for now.
Another thing that emerged from this is that standard_planner() needs
to check for initPlans before deciding that it's safe to stick a Gather
node on top in force_parallel_mode mode. We previously guarded against
that by deciding the plan wasn't wholePlanParallelSafe if any subplans
had been found, but after commit 5ce5e4a12 it's necessary to have this
substitute test, because path parallel_safe markings don't account for
initPlans. (Normally, we'd have decided the paths weren't safe anyway
due to appearances of SubPlan nodes, Params, or CTE scans somewhere in
the tree --- but it's possible for those all to be optimized away while
initPlans still remain.)
Per fuzz testing by Andreas Seltenreich.
Report: <874m89rw7x.fsf@credativ.de>
As of 9.6, pg_regress doesn't build unless storage/lwlocknames.h has been
created; but there was nothing forcing that to happen if you just went into
src/test/regress/ and built there. We previously had a similar complaint
about plpython.
To fix in a way that won't break next time we invent a generated header,
make src/backend/Makefile expose a phony target for updating all the
include files it builds, and invoke that before building pg_regress or
plpython. In principle, maybe we ought to invoke that everywhere; but
it would add a lot of usually-useless make cycles, so let's just do it
in the places where people have complained.
I made a couple of cosmetic adjustments in src/backend/Makefile as well,
to deal with the generated headers in consistent orders.
Michael Paquier and Tom Lane
Report: <31398.1467036827@sss.pgh.pa.us>
Report: <20150916200959.GB32090@msg.df7cb.de>
Commit 3fc6e2d7f5 introduced new "upper"
RelOptInfo structures but didn't set consider_parallel for them
correctly, a point I completely missed when reviewing it. Later,
commit e06a38965b made the situation
worse by doing it incorrectly for the grouping relation. Try to
straighten all of that out. Along the way, get rid of the annoying
wholePlanParallelSafe flag, which was only necessarily because of
the fact that upper planning stages didn't use paths at the time
that code was written.
The most important immediate impact of these changes is that
force_parallel_mode will provide useful test coverage in quite a few
more scenarios than it did previously, but it's also necessary
preparation for fixing some problems related to subqueries.
Patch by me, reviewed by Tom Lane.
In non-text output formats, parallelized aggregates were reporting
"Partial" or "Finalize" as a field named "Operation", which might be all
right in the absence of any context --- but other plan node types use that
field to report SQL-visible semantics, such as Select/Insert/Update/Delete.
So that naming choice didn't seem good to me. I changed it to "Partial
Mode".
Also, the field did not appear at all for a non-parallelized Agg plan node,
which is contrary to expectation in non-text formats. We're notionally
producing objects that conform to a schema, so the set of fields for a
given node type and EXPLAIN mode should be well-defined. I set it up to
fill in "Simple" in such cases.
Other fields that were added for parallel query, namely "Parallel Aware"
and Gather's "Single Copy", had not gotten the word on that point either.
Make them appear always in non-text output.
Also, the latter two fields were nominally producing boolean output, but
were getting it wrong, because bool values shouldn't be quoted in JSON or
YAML. Somehow we'd not needed an ExplainPropertyBool formatting subroutine
before 9.6; but now we do, so invent it.
Discussion: <16002.1466972724@sss.pgh.pa.us>
Since get_relation_foreign_keys doesn't try to determine whether RTEs
are actually part of the query semantics, it might make FK info records
linking to RTEs that won't have a RelOptInfo at all. Cope with that.
Per bug #14219 from Andrew Gierth.
Report: <20160629183338.1397.43514@wrigleys.postgresql.org>
If we need to use a gating Result node for pseudoconstant quals,
create_scan_plan() intentionally suppresses use_physical_tlist's checks
on whether there are matches for sortgroupref labels, on the grounds that
we don't need matches because we can label the Result's projection output
properly. However, it then called apply_pathtarget_labeling_to_tlist
anyway. This oversight was harmless when written, but in commit aeb9ae645
I made that function throw an error if there was no match. Thus, the
combination of a table scan, pseudoconstant quals, and a non-simple-Var
sortgroupref column threw the dreaded "ORDER/GROUP BY expression not found
in targetlist" error. To fix, just skip applying the labeling in this
case. Per report from Rushabh Lathia.
Report: <CAGPqQf2iLB8t6t-XrL-zR233DFTXxEsfVZ4WSqaYfLupEoDxXA@mail.gmail.com>
Previously, these commands always planned the given query and went through
executor startup before deciding not to actually run the query if WITH NO
DATA is specified. This behavior is problematic for pg_dump because it
may cause errors to be raised that we would rather not see before a
REFRESH MATERIALIZED VIEW command is issued. See for example bug #13907
from Marian Krucina. This change is not sufficient to fix that particular
bug, because we also need to tweak pg_dump to issue the REFRESH later,
but it's a necessary step on the way.
A user-visible side effect of doing things this way is that the returned
command tag for WITH NO DATA cases will now be "CREATE MATERIALIZED VIEW"
or "CREATE TABLE AS", not "SELECT 0". We could preserve the old behavior
but it would take more code, and arguably that was just an implementation
artifact not intended behavior anyhow.
In 9.5 and HEAD, also get rid of the static variable CreateAsReladdr, which
was trouble waiting to happen; there is not any prohibition on nested
CREATE commands.
Back-patch to 9.3 where CREATE MATERIALIZED VIEW was introduced.
Michael Paquier and Tom Lane
Report: <20160202161407.2778.24659@wrigleys.postgresql.org>
<-> operator now have higher predecence than & (AND) operator. This change
was motivated by unexpected difference of similar queries:
'a & b <-> c'::tsquery and 'b <-> c & a'. Before first query means
(a & b) <-> c and second one - '(b <-> c) & a', now phrase operator evaluates
first.
Per suggestion from Tom Lane 32260.1465402409@sss.pgh.pa.us
If there is no positional information of lexemes then phrase operator will not
fallback to AND operator. This change makes needing to modify TS_execute()
interface, because somewhere (in indexes, for example) positional information
is unaccesible and in this cases we need to force fallback to AND.
Per discussion c19fcfec308e6ccd952cdde9e648b505@mail.gmail.com
The original specification for this called for the deserialization function
to have signature "deserialize(serialtype) returns transtype", which is a
security violation if transtype is INTERNAL (which it always would be in
practice) and serialtype is not (which ditto). The patch blithely overrode
the opr_sanity check for that, which was sloppy-enough work in itself,
but the indisputable reason this cannot be allowed to stand is that CREATE
FUNCTION will reject such a signature and thus it'd be impossible for
extensions to create parallelizable aggregates.
The minimum fix to make the signature type-safe is to add a second, dummy
argument of type INTERNAL. But to lock it down a bit more and make misuse
of INTERNAL-accepting functions less likely, let's get rid of the ability
to specify a "serialtype" for an aggregate and just say that the only
useful serialtype is BYTEA --- which, in practice, is the only interesting
value anyway, due to the usefulness of the send/recv infrastructure for
this purpose. That means we only have to allow "serialize(internal)
returns bytea" and "deserialize(bytea, internal) returns internal" as
the signatures for these support functions.
In passing fix bogus signature of int4_avg_combine, which I found thanks
to adding an opr_sanity check on combinefunc signatures.
catversion bump due to removing pg_aggregate.aggserialtype and adjusting
signatures of assorted built-in functions.
David Rowley and Tom Lane
Discussion: <27247.1466185504@sss.pgh.pa.us>
The annotation for "ERROR: language "foo" is not trusted" used to say
"HINT: Only superusers can use untrusted languages", which was fairly
poorly thought out. For one thing, it's not a hint about what to do,
but a statement of fact, which makes it errdetail. But also, this
fails to clarify things much, because there's a missing step in the
chain of reasoning. I think it's more useful to say "GRANT and REVOKE
are not allowed on untrusted languages, because only superusers can use
untrusted languages".
It's been like this for a long time, but given the lack of previous
complaints, I don't think this is worth back-patching.
Discussion: <1417.1466289901@sss.pgh.pa.us>
The previous code neglected the fact that the scanjoin_target might
carry sortgroupref labelings that we need to absorb. Instead, do
create_projection_path() unconditionally, and tweak the path's cost
estimate after the fact. (I'm now convinced that we ought to refactor
the way we account for sometimes not needing a separate projection step,
but right now is not the time for that sort of cleanup.)
Problem identified by Amit Kapila, patch by me.
Commit 04ae11f62e removed some broken
code to apply the scan/join target to partial paths, but its theory
that this processing step is totally unnecessary turns out to be wrong.
Put similar code back again, but this time, check for parallel-safety
and avoid in-place modifications to paths that may already have been
used as part of some other path.
(This is not an entirely elegant solution to this problem; it might
be better, for example, to postpone generate_gather_paths for the
topmost scan/join rel until after the scan/join target has been
applied. But this is not the time for such redesign work.)
Amit Kapila and Robert Haas
If you really want to vacuum every single page in the relation,
regardless of apparent visibility status or anything else, you can use
this option. In previous releases, this behavior could be achieved
using VACUUM (FREEZE), but because we can now recognize all-frozen
pages as not needing to be frozen again, that no longer works. There
should be no need for routine use of this option, but maybe bugs or
disaster recovery will necessitate its use.
Patch by me, reviewed by Andres Freund.
In commit 8c1d9d56e9, I attempted to
add a regression test that would fail if the target list was pushed
into a parallel worker, but due to brain fade on my part, it just
randomly fails whether anything bad or not, because the error check
inside the parallel_restricted() function tests whether there is
*any process in the system* that is not connected to a client, not
whether the process running the query is not connected to a client.
A little experimentation has left me pessimistic about the
prospects of doing better here in a short amount of time, so let's
just fall back to checking that the plan is as we expect and leave
the execution-time check for another day.
Commit 14a254fb52 managed not to
exercise the code it was intended to test, and the comment explaining
why no "parallel worker" line showed up in the context wasn't right.
Amit Kapila, tweaked by me per Amit's analysis.
To achieve this, ANALYZE the data table before querying it, as suggested
by Tom Lane. On my system, this enables the test to pass with 128 kB of
work_mem (a value with which other tests fail -- so it seems good
enough).
Reported by Michaël Paquier.
This commit reverts 137805f89 as well as the associated commits 015e88942,
5306df283, and 68d704edb. We found multiple bugs in this feature, and
there was concern about possible planner slowdown (though to be fair,
exhibiting a very large slowdown proved difficult). The way forward
requires a considerable rewrite, which may or may not be possible to
accomplish in time for beta2. In my judgment reviewing the rewrite will
be easier to accomplish starting from a clean slate, so let's temporarily
revert what's there now. This also leaves us in a safe state if it turns
out to be necessary to postpone the rewrite to the next development cycle.
Discussion: <20160429102531.GA13701@huehner.biz>
dumpAccessMethod() didn't get the memo that we now have a bitfield for
the components which should be dumped instead of a simple boolean.
Correct that by checking if the relevant bit is set for each component
being dumped out (and not dumping it out if it isn't set).
This corrects an issue where CREATE ACCESS METHOD commands were being
included in non-binary-upgrades when an extension included an access
method (as the bloom extensions does).
Also add a regression test to make sure that we only dump out the
ACCESS METHOD commands, when they are part of an extension, when doing
a binary upgrade.
Pointed out by Thom Brown.
Further thought about bug #14174 motivated me to try the case of a
R/W datum being returned from a VALUES list, and sure enough it was
broken. Fix that.
Also add a regression test case exercising the same scenario for
FunctionScan. That's not broken right now, because the function's
result will get shoved into a tuplestore between generation and use;
but it could easily become broken whenever we get around to optimizing
FunctionScan better.
There don't seem to be any other places where we put the result of
expression evaluation into a virtual tuple slot that could then be
the source for Vars of further expression evaluation, so I think
this is the end of this bug.
If a plan node output expression returns an "expanded" datum, and that
output column is referenced in more than one place in upper-level plan
nodes, we need to ensure that what is returned is a read-only reference
not a read/write reference. Otherwise one of the referencing sites could
scribble on or even delete the expanded datum before we have evaluated the
others. Commit 1dc5ebc907, which introduced this feature, supposed
that it'd be sufficient to make SubqueryScan nodes force their output
columns to read-only state. The folly of that was revealed by bug #14174
from Andrew Gierth, and really should have been immediately obvious
considering that the planner will happily optimize SubqueryScan nodes
out of the plan without any regard for this issue.
The safest fix seems to be to make ExecProject() force its results into
read-only state; that will cover every case where a plan node returns
expression results. Actually we can delegate this to ExecTargetList()
since we can recursively assume that plain Vars will not reference
read-write datums. That should keep the extra overhead down to something
minimal. We no longer need ExecMakeSlotContentsReadOnly(), which was
introduced only in support of the idea that just a few plan node types
would need to do this.
In the future it would be nice to have the planner account for this problem
and inject force-to-read-only expression evaluation nodes into only the
places where there's a risk of multiple evaluation. That's not a suitable
solution for 9.5 or even 9.6 at this point, though.
Report: <20160603124628.9932.41279@wrigleys.postgresql.org>
Mostly these are just comments but there are a few in documentation
and a handful in code and tests. Hopefully this doesn't cause too much
unnecessary pain for backpatching. I relented from some of the most
common like "thru" for that reason. The rest don't seem numerous
enough to cause problems.
Thanks to Kevin Lyda's tool https://pypi.python.org/pypi/misspellings
The IF EXISTS option was documented, and implemented in the grammar, but
it didn't actually work for lack of support in does_not_exist_skipping().
Per bug #14160.
Report and patch by Kouhei Sutou
Report: <20160527070433.19424.81712@wrigleys.postgresql.org>
As part of upper planner pathification (commit 3fc6e2d7f5) I redid
createplan.c's approach to the physical-tlist optimization, in which scan
nodes are allowed to return exactly the underlying table's columns so as
to save doing a projection step at runtime. The logic was intentionally
more aggressive than before about applying the optimization, which is
generally a good thing, but Andres Freund found a case in which it got
too aggressive. Namely, if any column is referenced more than once in
the parent plan node's sorting or grouping column list, we can't optimize
because then that column would need to have more than one ressortgroupref
label, and we only have space for one.
Add logic to detect this situation in use_physical_tlist(), and also add
some error checking in apply_pathtarget_labeling_to_tlist(), which this
example proves was being overly cavalier about whether what it was doing
made any sense.
The added test case exposes the problem only because we do not eliminate
duplicate grouping keys. That might be something to fix someday, but it
doesn't seem like appropriate post-beta work.
Report: <20160526021235.w4nq7k3gnheg7vit@alap3.anarazel.de>
All of the other tables used in the query in dumpTable(), which is
collecting column-level ACLs, are qualified, so we should be qualifying
the pg_init_privs, the related sub-select against pg_class and the
other queries added by the pg_dump catalog ACLs work.
Also, use ::regclass (or ::pg_catalog.regclass, where appropriate)
instead of using a poorly constructed query to get the OID for various
catalog tables.
Issues identified by Noah and Alvaro, patch by me.
subquery_planner() failed to apply expression preprocessing to the
arbiterElems and arbiterWhere fields of an OnConflictExpr. No doubt the
theory was that this wasn't necessary because we don't actually try to
execute those expressions; but that's wrong, because it results in failure
to match to index expressions or index predicates that are changed at all
by preprocessing. Per bug #14132 from Reynold Smith.
Also add pullup_replace_vars processing for onConflictWhere. Perhaps
it's impossible to have a subquery reference there, but I'm not exactly
convinced; and even if true today it's a failure waiting to happen.
Also add some comments to other places where one or another field of
OnConflictExpr is intentionally ignored, with explanation as to why it's
okay to do so.
Also, catalog/dependency.c failed to record any dependency on the named
constraint in ON CONFLICT ON CONSTRAINT, allowing such a constraint to
be dropped while rules exist that depend on it, and allowing pg_dump to
dump such a rule before the constraint it refers to. The normal execution
path managed to error out reasonably for a dangling constraint reference,
but ruleutils.c dumped core; so in addition to fixing the omission, add
a protective check in ruleutils.c, since we can't retroactively add a
dependency in existing databases.
Back-patch to 9.5 where this code was introduced.
Report: <20160510190350.2608.48667@wrigleys.postgresql.org>
The test_pg_dump extension doesn't have a C component, so we need
to exclude it from the MSVC build system trying to figure out how
to build it.
Also add a "MODULES" line to the Makefile, as test_extensions has.
Might not be necessary, but seems good to keep things consistent.
Lastly, remove the 'installcheck' line from test_pg_dump, as that
was causing redefinition errors, at least on my box. This also
makes test_pg_dump consistent with how commit_ts is set up.
The Makefile for test_pg_dump shouldn't have a MODULES_big line
because there's no actual compiled bit for that extension. Hopefully
this will fix the Windows buildfarm members which were complaining.
In passing, also add the 'prove_installcheck' bit to the pg_dump and
test_pg_dump Makefiles, to get the buildfarm members to actually run
those tests.
Default roles really should be like regular roles, for the most part.
This removes a number of checks that were trying to make default roles
extra special by not allowing them to be used as regular roles.
We still prevent users from creating roles in the "pg_" namespace or
from altering roles which exist in that namespace via ALTER ROLE, as
we can't preserve such changes, but otherwise the roles are very much
like regular roles.
Based on discussion with Robert and Tom.
This TAP test suite will create a new cluster, populate it based on
the 'create_sql' values in the '%tests' hash, run all of the runs
defined in the '%pgdump_runs' hash, and then for each test in the
'%tests' hash, compare each run's output the the regular expression
defined for the test under the 'like' and 'unlike' functions, as
appropriate.
While this test suite covers a fair bit of ground (67% of pg_dump.c
and quite a bit of the other files in src/bin/pg_dump), there is
still quite a bit which remains to be added to provide better code
coverage. Still, this is quite a bit better than we had, and has
found a few bugs already (note that the CREATE TRANSFORM test is
commented out, as it is currently failing).
Idea for using the TAP system from Tom, though all of the code is mine.
The similarity of the original names to SQL keywords seems like a bad
idea. Rename them before we're stuck with 'em forever.
In passing, minor code and docs cleanup.
Discussion: <4875.1462210058@sss.pgh.pa.us>
Commit 7d9a4737c2 greatly improved the
accuracy of the numeric transcendental functions, however it failed to
consider the case where the result from pow() is close to the overflow
threshold, for example 0.12 ^ -2345.6. For such inputs, where the
result has more than 2000 digits before the decimal point, the decimal
result weight estimate was being clamped to 2000, leading to a loss of
precision in the final calculation.
Fix this by replacing the clamping code with an overflow test that
aborts the calculation early if the final result is sure to overflow,
based on the overflow limit in exp_var(). This provides the same
protection against integer overflow in the subsequent result scale
computation as the original clamping code, but it also ensures that
precision is never lost and saves compute cycles in cases that are
sure to overflow.
The new early overflow test works with the initial low-precision
result (expected to be accurate to around 8 significant digits) and
includes a small fuzz factor to ensure that it doesn't kick in for
values that would not overflow exp_var(), so the overall overflow
threshold of pow() is unchanged and consistent for all inputs with
non-integer exponents.
Author: Dean Rasheed
Reviewed-by: Tom Lane
Discussion: http://www.postgresql.org/message-id/CAEZATCUj3U-cQj0jjoia=qgs0SjE3auroxh8swvNKvZWUqegrg@mail.gmail.com
See-also: http://www.postgresql.org/message-id/CAEZATCV7w+8iB=07dJ8Q0zihXQT1semcQuTeK+4_rogC_zq5Hw@mail.gmail.com
This reverts commits f07d18b6e9, 82c83b3372, 3a3b309041, and
24c5f1a103.
This feature has shown enough immaturity that it was deemed better to
rip it out before rushing some more fixes at the last minute. There are
discussions on larger changes in this area for the next release.
Given a three-or-more-way equivalence class, such as X.Y = Y.Y = Z.Z,
it was possible for the planner to omit one of the quals needed to
enforce that all members of the equivalence class are actually equal.
This only happened in the case of a parameterized join node for two
of the relations, that is a plan tree like
Nested Loop
-> Scan X
-> Nested Loop
-> Scan Y
-> Scan Z
Filter: Z.Z = X.X
The eclass machinery normally expects to apply X.X = Y.Y when those
two relations are joined, but in this shape of plan tree they aren't
joined until the top node --- and, if the lower nested loop is marked
as parameterized by X, the top node will assume that the relevant eclass
condition(s) got pushed down into the lower node. On the other hand,
the scan of Z assumes that it's only responsible for constraining Z.Z
to match any one of the other eclass members. So one or another of
the required quals sometimes fell between the cracks, depending on
whether consideration of the eclass in get_joinrel_parampathinfo()
for the lower nested loop chanced to generate X.X = Y.Y or X.X = Z.Z
as the appropriate constraint there. If it generated the latter,
it'd erroneously suppose that the Z scan would take care of matters.
To fix, force X.X = Y.Y to be generated and applied at that join node
when this case occurs.
This is *extremely* hard to hit in practice, because various planner
behaviors conspire to mask the problem; starting with the fact that the
planner doesn't really like to generate a parameterized plan of the
above shape. (It might have been impossible to hit it before we
tweaked things to allow this plan shape for star-schema cases.) Many
thanks to Alexander Kirkouski for submitting a reproducible test case.
The bug can be demonstrated in all branches back to 9.2 where parameterized
paths were introduced, so back-patch that far.
The previous coding here was formally undefined, though it seems to
accidentally work on most platforms in the buildfarm. Caught by some
OpenBSD platforms in which libc contains an assertion check for
overlapping areas passed to memcpy().
Thomas Munro
Previously, database clusters created by a TAP test were shut down by
DESTROY methods attached to the PostgresNode objects representing them.
The trouble with that is that if the objects survive into the final global
destruction phase (which they do), Perl executes the DESTROY methods in an
unspecified order. Thus, the order of shutdown of multiple clusters was
indeterminate, which might lead to not-very-reproducible errors getting
logged (eg from a slave whose master might or might not get killed first).
Worse, the File::Temp objects representing the temporary PGDATA directories
might get destroyed before the PostgresNode objects, resulting in attempts
to delete PGDATA directories that still have live servers in them. On
Windows, this would lead to directory deletion failures; on Unix, it
usually had no effects worse than erratic "could not open temporary
statistics file "pg_stat/global.tmp": No such file or directory" log
messages.
While none of this would affect the reported result of the TAP test, which
is already determined, it could be very confusing when one is trying to
understand from the logs what went wrong with a failed test.
To fix, do the postmaster shutdowns in an END block rather than at object
destruction time. The END block will execute at a well-defined (and
reasonable) time during script termination, and it will stop the
postmasters in order of PostgresNode object creation. (Perhaps we should
change that to be reverse order of creation, but the main point here is
that we now have control which we did not before.) Use "pg_ctl stop", not
an asynchronous kill(SIGQUIT), so that we wait for the postmasters to shut
down before proceeding with directory deletion.
Deletion of temporary directories still happens in an unspecified order
during global destruction, but I can see no reason to care about that
once the postmasters are stopped.
Commit fab84c7787 tried to get away without doing an actual bind(),
but buildfarm results show that that doesn't get the job done. So we must
really bind to the target port --- and at least on my Linux box, we need a
listen() as well, or conflicts won't be detected. We rely on SO_REUSEADDR
to prevent problems from starting a postmaster on the socket immediately
after we've bound to it in the test code. (There may be platforms where
that doesn't work too well. But fortunately, we only really care whether
this works on Windows, and there the default behavior should be OK.)
Buildfarm members bowerbird and jacana have shown intermittent "could not
bind IPv4 socket" failures in the BinInstallCheck stage since mid-December,
shortly after commits 1caef31d9e and 9821492ee4 changed the
logic for selecting which port to use in temporary installations. One
plausible explanation is that we are randomly selecting ports that are
already in use for some non-Postgres purpose. Although the code tried
to defend against already-in-use ports, it used pg_isready to probe
the port which is quite unhelpful: if some non-Postgres server responds
at the given address, pg_isready will generally say "no response",
leading to exactly the wrong conclusion about whether the port is free.
Instead, let's use a simple TCP connect() call to see if anything answers
without making assumptions about what it is. Note that this means there's
no direct check for a conflicting Unix socket, but that should be okay
because there should be no other Unix sockets in use in the temporary
socket directory created for a test run.
This is only a partial solution for the TCP case, since if the port number
is in use for an outgoing connection rather than a listening socket, we'll
fail to detect that. We could try to bind() to the proposed port as a
means of detecting that case, but that would introduce its own failure
modes, since the system might consider the address to remain reserved for
some period of time after we drop the bound socket. Close study of the
errors returned by bowerbird and jacana suggests that what we're seeing
there may be conflicts with listening not outgoing sockets, so let's try
this and see if it improves matters. It's certainly better than what's
there now, in any case.
Michael Paquier, adjusted by me to work on non-Windows as well as Windows
Given a left join containing a full join in its righthand side, with
the left join's joinclause referencing only one side of the full join
(in a non-strict fashion, so that the full join doesn't get simplified),
the planner could fail with "failed to build any N-way joins" or related
errors. This happened because the full join was seen as overlapping the
left join's RHS, and then recent changes within join_is_legal() caused
that function to conclude that the full join couldn't validly be formed.
Rather than try to rejigger join_is_legal() yet more to allow this,
I think it's better to fix initsplan.c so that the required join order
is explicit in the SpecialJoinInfo data structure. The previous coding
there essentially ignored full joins, relying on the fact that we don't
flatten them in the joinlist data structure to preserve their ordering.
That's sufficient to prevent a wrong plan from being formed, but as this
example shows, it's not sufficient to ensure that the right plan will
be formed. We need to work a bit harder to ensure that the right plan
looks sane according to the SpecialJoinInfos.
Per bug #14105 from Vojtech Rylko. This was apparently induced by
commit 8703059c6 (though now that I've seen it, I wonder whether there
are related cases that could have failed before that); so back-patch
to all active branches. Unfortunately, that patch also went into 9.0,
so this bug is a regression that won't be fixed in that branch.
When we shoehorned "x op ANY (array)" into the SQL syntax, we created a
fundamental ambiguity as to the proper treatment of a sub-SELECT on the
righthand side: perhaps what's meant is to compare x against each row of
the sub-SELECT's result, or perhaps the sub-SELECT is meant as a scalar
sub-SELECT that delivers a single array value whose members should be
compared against x. The grammar resolves it as the former case whenever
the RHS is a select_with_parens, making the latter case hard to reach ---
but you can get at it, with tricks such as attaching a no-op cast to the
sub-SELECT. Parse analysis would throw away the no-op cast, leaving a
parsetree with an EXPR_SUBLINK SubLink directly under a ScalarArrayOpExpr.
ruleutils.c was not clued in on this fine point, and would naively emit
"x op ANY ((SELECT ...))", which would be parsed as the first alternative,
typically leading to errors like "operator does not exist: text = text[]"
during dump/reload of a view or rule containing such a construct. To fix,
emit a no-op cast when dumping such a parsetree. This might well be
exactly what the user wrote to get the construct accepted in the first
place; and even if she got there with some other dodge, it is a valid
representation of the parsetree.
Per report from Karl Czajkowski. He mentioned only a case involving
RLS policies, but actually the problem is very old, so back-patch to
all supported branches.
Report: <20160421001832.GB7976@moraine.isi.edu>
In commit 2ffa869620 we made pg_ctl recognize an environment variable
PGCTLTIMEOUT to set the default timeout for starting and stopping the
postmaster. However, pg_regress uses pg_ctl only for the "stop" end of
that; it has bespoke code for starting the postmaster, and that code has
historically had a hard-wired 60-second timeout. Further buildfarm
experience says it'd be a good idea if that timeout were also controlled
by PGCTLTIMEOUT, so let's make it so. Like the previous patch, back-patch
to all active branches.
Discussion: <13969.1461191936@sss.pgh.pa.us>
Print the actual value of each function result that's expected to be exact,
rather than merely emitting a NULL if it's not right. Although we print
these with extra_float_digits = 3, we should not trust that the platform
will produce a result visibly different from the expected value if it's off
only in the last place; hence, also include comparisons against the exact
values as before. This is a bit bulkier and uglier than the previous
printout, but it will provide more information and be easier to interpret
if there's a test failure.
Discussion: <18241.1461073100@sss.pgh.pa.us>
Although OID acts pretty much like user data, the other system columns do
not, so an index on one would likely misbehave. And it's pretty hard to
see a use-case for one, anyway. Let's just forbid the case rather than
worry about whether it should be supported.
David Rowley
For reasons of sheer brain fade, we (I) was calling systable_endscan()
immediately after systable_getnext() and expecting the tuple returned
by systable_getnext() to still be valid.
That's clearly wrong. Move the systable_endscan() down below the tuple
usage.
Discovered initially by Pavel Stehule and then also by Alvaro.
Add a regression test based on Alvaro's testing.
The original coding of this test used table and view names like "t",
"tv", "foo", etc. This tended to interfere with doing simple manual
tests in the regression database; not to mention that it posed a
considerable risk of conflict with other regression test scripts.
Prefix these names with "mvtest_" to avoid such conflicts.
Also, change transiently-created role name to be "regress_xxx" per
discussions about being careful with regression-test role creation.
Careless coding added by commit 07cacba983 could result in a crash
or a bizarre error message if someone tried to select an index on the
OID column as the replica identity index for a table. Back-patch to 9.4
where the feature was introduced.
Discussion: CAKJS1f8TQYgTRDyF1_u9PVCKWRWz+DkieH=U7954HeHVPJKaKg@mail.gmail.com
David Rowley
The regression test checks whether the output of pg_stat_replication is
expected or not after changing synchronous_standby_names and reloading
the configuration file. Regarding this test logic, previously there was
a timing issue which made the test result unstable. That is,
pg_stat_replication could return unexpected result during small window
after the configuration file was reloaded before new setting value
took effect, and which made the test fail.
This commit changes the test logic so that it uses a loop with a timeout
to give some room for the test to pass. Now the test fails only when
pg_stat_replication keeps returning unexpected result for 30 seconds.
Michael Paquier
\crosstabview interpreted its arguments in an unusual way, including
doing case-insensitive matching of unquoted column names, which is
surely not the right thing. Rip that out in favor of doing something
equivalent to the dequoting/case-folding rules used by other psql
commands. To keep it simple, change the syntax so that the optional
sort column is specified as a separate argument, instead of the
also-quite-unusual syntax that attached it to the colH argument with
a colon.
Also, rework the error messages to be closer to project style.
For a long time, opclasscmds.c explained that "we do not create a
dependency link to the AM [for an opclass or opfamily], because we don't
currently support DROP ACCESS METHOD". Commit 473b932870 invented
DROP ACCESS METHOD, but it batted only 1 for 2 on adding the dependency
links, and 0 for 2 on updating the comments about the topic.
In passing, undo the same commit's entirely inappropriate decision to
blow away an existing index as a side-effect of create_am.sql.
Everyplace else thinks it's _WIN64, so make these places fall in line.
The pg_regress.c usage is not going to result in any change in behavior,
only suppressing (or not) a compiler warning about downcasting HANDLEs.
So there seems no need for back-patching there.
The libpq/win32.mak usage might represent an actual bug, if anyone were
using this script to build for Windows64, which perhaps nobody is.
Given the lack of field complaints, no back-patch here either.
pg_regress.c problem found by Christian Ullrich, the other by me.
To avoid any possible overlap with existing roles on a system when
doing a 'make installcheck', use role names which start with
'regress_'.
Pointed out by Tom.
\crosstabview is a completely different way to display results from a
query: instead of a vertical display of rows, the data values are placed
in a grid where the column and row headers come from the data itself,
similar to a spreadsheet.
The sort order of the horizontal header can be specified by using
another column in the query, and the vertical header determines its
ordering from the order in which they appear in the query.
This only allows displaying a single value in each cell. If more than
one value correspond to the same cell, an error is thrown. Merging of
values can be done in the query itself, if necessary. This may be
revisited in the future.
Author: Daniel Verité
Reviewed-by: Pavel Stehule, Dean Rasheed
This creates an initial set of default roles which administrators may
use to grant access to, historically, superuser-only functions. Using
these roles instead of granting superuser access reduces the number of
superuser roles required for a system. Documention for each of the
default roles has been added to user-manag.sgml.
Bump catversion to 201604082, as we had a commit that bumped it to
201604081 and another that set it back to 201604071...
Reviews by José Luis Tallón and Robert Haas
This will prevent users from creating roles which begin with "pg_" and
will check for those roles before allowing an upgrade using pg_upgrade.
This will allow for default roles to be provided at initdb time.
Reviews by José Luis Tallón and Robert Haas
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
Output order from the pg_indexes view might vary depending on the
phase of the moon, so add ORDER BY to ensure stable results of tests
added by commit 386e3d7609.
Per buildfarm.
As noticed by Tom Lane changing operation's number in commit
bb140506df causes on-disk format incompatibility.
Revert to previous numbering, that is reason to add special array to store
priorities of operation. Also it reverts order of tsquery to previous.
Author: Dmitry Ivanov
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
In cases where joins use multiple columns we currently assess each join
separately causing gross mis-estimates for join cardinality.
This patch adds use of FK information for the first time into the
planner. When FKs are present and we have multi-column join information,
plan estimates will be drastically improved. Cases with multiple FKs
are handled, though partial matches are ignored currently.
Net effect is substantial performance improvements for joins in many
common cases. Additional planning time is isolated to cases that are
currently performing poorly, measured at 0.08 - 0.15 ms.
Please watch for planner performance regressions; circumstances seem
unlikely but the law of unintended consequences may apply somewhen.
Additional complex tests welcome to prove this before release.
Tests can be performed using SET enable_fkey_estimates = on | off
using scripts provided during Hackers discussions, message id:
552335D9.3090707@2ndquadrant.com
Authors: Tomas Vondra and David Rowley
Reviewed and tested by Simon Riggs, adding comments only
We shouldn't be adding roles during the regression tests as that can
cause back-to-back installcheck runs to fail and users running the
regression tests likley don't want those extra roles.
Pointed out by Tom
While prior to this patch the user-visible effect on the database
of any set of successfully committed serializable transactions was
always consistent with some one-at-a-time order of execution of
those transactions, the presence of declarative constraints could
allow errors to occur which were not possible in any such ordering,
and developers had no good workarounds to prevent user-facing
errors where they were not necessary or desired. This patch adds
a check for serialization failure ahead of duplicate key checking
so that if a developer explicitly (redundantly) checks for the
pre-existing value they will get the desired serialization failure
where the problem is caused by a concurrent serializable
transaction; otherwise they will get a duplicate key error.
While it would be better if the reads performed by the constraints
could count as part of the work of the transaction for
serialization failure checking, and we will hopefully get there
some day, this patch allows a clean and reliable way for developers
to work around the issue. In many cases existing code will already
be doing the right thing for this to "just work".
Author: Thomas Munro, with minor editing of docs by me
Reviewed-by: Marko Tiikkaja, Kevin Grittner
Patch introduces new text search operator (<-> or <DISTANCE>) into tsquery.
On-disk and binary in/out format of tsquery are backward compatible.
It has two side effect:
- change order for tsquery, so, users, who has a btree index over tsquery,
should reindex it
- less number of parenthesis in tsquery output, and tsquery becomes more
readable
Authors: Teodor Sigaev, Oleg Bartunov, Dmitry Ivanov
Reviewers: Alexander Korotkov, Artur Zakirov
Commit c22650cd64 sparked a discussion
about diverse interpretations of "token user" in error messages. Expel
old and new specimens of that phrase by making all GetTokenInformation()
callers report errors the way GetTokenUser() has been reporting them.
These error conditions almost can't happen, so users are unlikely to
observe this change.
Reviewed by Tom Lane and Stephen Frost.
Now that all of the infrastructure exists, add in the ability to
dump out the ACLs of the objects inside of pg_catalog or the ACLs
for objects which are members of extensions, but only if they have
been changed from their original values.
The original values are tracked in pg_init_privs. When pg_dump'ing
9.6-and-above databases, we will dump out the ACLs for all objects
in pg_catalog and the ACLs for all extension members, where the ACL
has been changed from the original value which was set during either
initdb or CREATE EXTENSION.
This should not change dumps against pre-9.6 databases.
Reviews by Alexander Korotkov, Jose Luis Tallon
This new catalog holds the privileges which the system was
initialized with at initdb time, along with any permissions set
by extensions at CREATE EXTENSION time. This allows pg_dump
(and any other similar use-cases) to detect when the privileges
set on initdb-created or extension-created objects have been
changed from what they were set to at initdb/extension-creation
time and handle those changes appropriately.
Reviews by Alexander Korotkov, Jose Luis Tallon
It inserts a new value into an jsonb array at arbitrary position or
a new key to jsonb object.
Author: Dmitry Dolgov
Reviewers: Petr Jelinek, Vitaly Burovoy, Andrew Dunstan
This introduces a new dependency type which marks an object as depending
on an extension, such that if the extension is dropped, the object
automatically goes away; and also, if the database is dumped, the object
is included in the dump output. Currently the grammar supports this for
indexes, triggers, materialized views and functions only, although the
utility code is generic so adding support for more object types is a
matter of touching the parser rules only.
Author: Abhijit Menon-Sen
Reviewed-by: Alexander Korotkov, Álvaro Herrera
Discussion: http://www.postgresql.org/message-id/20160115062649.GA5068@toroid.org
has_parallel_hazard() was ignoring the proparallel markings for
aggregates, which is no good. Fix that. There was no way to mark
an aggregate as actually being parallel-safe, either, so add a
PARALLEL option to CREATE AGGREGATE.
Patch by me, reviewed by David Rowley.
This lets us use parallel aggregate for a variety of useful cases
that didn't work before, like sum(int8), sum(numeric), several
versions of avg(), and various other functions.
Add some regression tests, as well, testing the general sanity of
these and future catalog entries.
David Rowley, reviewed by Tomas Vondra, with a few further changes
by me.
\gexec executes the just-entered query, like \g, but instead of printing
the results it takes each field as a SQL command to send to the server.
Computing a series of queries to be executed is a fairly common thing,
but up to now you always had to resort to kluges like writing the queries
to a file and then inputting the file. Now it can be done with no
intermediate step.
The implementation is fairly straightforward except for its interaction
with FETCH_COUNT. ExecQueryUsingCursor isn't capable of being called
recursively, and even if it were, its need to create a transaction
block interferes unpleasantly with the desired behavior of \gexec after
a failure of a generated query (i.e., that it can continue). Therefore,
disable use of ExecQueryUsingCursor when doing the master \gexec query.
We can still apply it to individual generated queries, however, and there
might be some value in doing so.
While testing this feature's interaction with single-step mode, I (tgl) was
led to conclude that SendQuery needs to recognize SIGINT (cancel_pressed)
as a negative response to the single-step prompt. Perhaps that's a
back-patchable bug fix, but for now I just included it here.
Corey Huinker, reviewed by Jim Nasby, Daniel Vérité, and myself
When adjusting the estimate for the number of distinct values from a
rel in a grouped query to take into account the selectivity of the
rel's restrictions, use a formula that is less likely to produce
under-estimates.
The old formula simply multiplied the number of distinct values in the
rel by the restriction selectivity, which would be correct if the
restrictions were fully correlated with the grouping expressions, but
can produce significant under-estimates in cases where they are not
well correlated.
The new formula is based on the random selection probability, and so
assumes that the restrictions are not correlated with the grouping
expressions. This is guaranteed to produce larger estimates, and of
course risks over-estimating in cases where the restrictions are
correlated, but that has less severe consequences than
under-estimating, which might lead to a HashAgg that consumes an
excessive amount of memory.
This could possibly be improved upon in the future by identifying
correlated restrictions and using a hybrid of the old and new
formulae.
Author: Tomas Vondra, with some hacking be me
Reviewed-by: Mark Dilger, Alexander Korotkov, Dean Rasheed and Tom Lane
Discussion: http://www.postgresql.org/message-id/flat/56CD0381.5060502@2ndquadrant.com
In the test_slot_timelines test module, we were abusing passing NULL
values which was received as zeroes in x86, but this breaks in ARM
(buildfarm member hamster) by crashing instead. Fix the breakage by
marking these functions as STRICT; the InvalidXid value that was
previously implicit in NULL values (on x86 at least) can now be passed
as 0. Failing to follow the fmgr protocol to check for NULLs beforehand
was causing ARM to fail, as evidenced by segmentation faults in
buildfarm member hamster.
In order to use the new functionality in the test script, use COALESCE
in the right spot to avoid forwarding NULL values.
This was diagnosed from the hamster crash by Craig Ringer, who also
proposed a different patch (checking for NULL values explicitely in the
C function code, and keeping the non-strictness in the C functions).
I decided to go with this approach instead.
Our actual convention, contrary to what I said in 59a2111b23, is not to
quote type names, as evidenced by unquoted use of format_type_be()
result value in error messages. Remove quotes from recently tweaked
messages accordingly.
Per note from Tom Lane
Commit acdf2a8b added a test case involving minus zero as a box endpoint.
This is not very portable, as evidenced by the several older buildfarm
members that are failing on the test because they print minus zero as
just "0". If there were any significant reason to test this behavior,
we could consider carrying a separate expected-file; but it doesn't look
to me like there's adequate justification to accept such a maintenance
burden. Just change the test to use plain zero, instead.
Previously this test was relying too much on WAL replay to occur in the
exact configured interval, which was unreliable on slow or overly busy
servers. Use a custom loop instead of poll_query_until, which is
hopefully more reliable.
Per continued failures on buildfarm member hamster (which is probably
the only one running this test suite)
Author: Michaël Paquier
Previously, the planner would reject an index-only scan if any restriction
clause for its table used a column not available from the index, even
if that restriction clause would later be dropped from the plan entirely
because it's implied by the index's predicate. This is a fairly common
situation for partial indexes because predicates using columns not included
in the index are often the most useful kind of predicate, and we have to
duplicate (or at least imply) the predicate in the WHERE clause in order
to get the index to be considered at all. So index-only scans were
essentially unavailable with such partial indexes.
To fix, we have to do detection of implied-by-predicate clauses much
earlier in the planner. This patch puts it in check_index_predicates
(nee check_partial_indexes), meaning it gets done for every partial index,
whereas we previously only considered this issue at createplan time,
so that the work was only done for an index actually selected for use.
That could result in a noticeable planning slowdown for queries against
tables with many partial indexes. However, testing suggested that there
isn't really a significant cost, especially not with reasonable numbers
of partial indexes. We do get a small additional benefit, which is that
cost_index is more accurate since it correctly discounts the evaluation
cost of clauses that will be removed. We can also avoid considering such
clauses as potential indexquals, which saves useless matching cycles in
the case where the predicate columns aren't in the index, and prevents
generating bogus plans that double-count the clause's selectivity when
the columns are in the index.
Tomas Vondra and Kyotaro Horiguchi, reviewed by Kevin Grittner and
Konstantin Knizhnik, and whacked around a little by me
When decoding from a logical slot, it's necessary for xlog reading to be
able to read xlog from historical (i.e. not current) timelines;
otherwise, decoding fails after failover, because the archives are in
the historical timeline. This is required to make "failover logical
slots" possible; it currently has no other use, although theoretically
it could be used by an extension that creates a slot on a standby and
continues to replay from the slot when the standby is promoted.
This commit includes a module in src/test/modules with functions to
manipulate the slots (which is not otherwise possible in SQL code) in
order to enable testing, and a new test in src/test/recovery to ensure
that the behavior is as expected.
Author: Craig Ringer
Reviewed-By: Oleksii Kliukin, Andres Freund, Petr Jelínek
Formerly, the geometric I/O routines such as box_in and point_out relied
directly on strtod() and sprintf() for conversion of the float8 component
values of their data types. However, the behavior of those functions is
pretty platform-dependent, especially for edge-case values such as
infinities and NaNs. This was exposed by commit acdf2a8b37, which
added test cases involving boxes with infinity endpoints, and immediately
failed on Windows and AIX buildfarm members. We solved these problems
years ago in the main float8in and float8out functions, so let's fix it
by making the geometric types use that code instead of depending directly
on the platform-supplied functions.
To do this, refactor the float8in code so that it can be used to parse
just part of a string, and as a convenience make the guts of float8out
usable without going through DirectFunctionCall.
While at it, get rid of geo_ops.c's fairly shaky assumptions about the
maximum output string length for a double, by having it build results in
StringInfo buffers instead of fixed-length strings.
In passing, convert all the "invalid input syntax for type foo" messages
in this area of the code into "invalid input syntax for type %s" to reduce
the number of distinct translatable strings, per recent discussion.
We would have needed a fair number of the latter anyway for code-sharing
reasons, so we might as well just go whole hog.
Note: this patch is by no means intended to guarantee that the geometric
types uniformly behave sanely for infinity or NaN component values.
But any bugs we have in that line were there all along, they were just
harder to reach in a platform-independent way.
Patch implements quad-tree over boxes, naive approach of 2D quad tree will not
work for any non-point objects because splitting space on node is not
efficient. The idea of pathc is treating 2D boxes as 4D points, so,
object will not overlap (in 4D space).
The performance tests reveal that this technique especially beneficial
with too much overlapping objects, so called "spaghetti data".
Author: Alexander Lebedev with editorization by Emre Hasegeli and me
Reporting the specific out-of-range input value produces platform-dependent
results. We could skip reporting the value, but that's contrary to our
message style guidelines and unhelpful to users. Or we could add a
separate expected-output file for Windows, but that would be a substantial
maintenance burden, and these test cases seem unlikely to be worth it.
Per buildfarm.
With the original SQL-function implementation, such cases failed because
we don't support infinite intervals. Converting the function to C lets
us bypass the interval representation, which should be a bit faster as
well as more flexible.
Vitaly Burovoy, reviewed by Anastasia Lubennikova
When tsearch was implemented I did several mistakes in hostname/email
definition rules:
1) allow underscore in hostname what prohibited by RFC
2) forget to allow leading digits separated by hyphen (like 123-x.com)
in hostname
3) do no allow underscore/hyphen after leading digits in localpart of email
Artur's patch resolves two last issues, but by the way allows hosts name like
123_x.com together with 123-x.com. RFC forbids underscore usage in hostname
but pg allows that since initial tsearch version in core, although only
for non-digits. Patch syncs support digits and nondigits in both hostname and
email.
Forbidding underscore in hostname may break existsing usage of tsearch and,
anyhow, it should be done by separate patch.
Author: Artur Zakirov
BUG: #13964
Corrects an oversight in 2c83f435a3 where the $timed_out reference var
isn't initialized; using it would require the caller to initialize it
beforehand, which is cumbersome.
Author: Craig Ringer
In the plancache, we check if the environment we planned the query under
has changed in a way which requires us to re-plan, such as when the user
for whom the plan was prepared changes and RLS is being used (and,
therefore, there may be different policies to apply).
Unfortunately, while those values were set and checked, they were not
being reset when the query was re-planned and therefore, in cases where
we change role, re-plan, and then change role again, we weren't
re-planning again. This leads to potentially incorrect policies being
applied in cases where role-specific policies are used and a given query
is planned under one role and then executed under other roles, which
could happen under security definer functions or when a common user and
query is planned initially and then re-used across multiple SET ROLEs.
Further, extensions which made use of CopyCachedPlan() may suffer from
similar issues as the RLS-related fields were not properly copied as
part of the plan and therefore RevalidateCachedQuery() would copy in the
current settings without invalidating the query.
Fix by using the same approach used for 'search_path', where we set the
correct values in CompleteCachedPlan(), check them early on in
RevalidateCachedQuery() and then properly reset them if re-planning.
Also, copy through the values during CopyCachedPlan().
Pointed out by Ashutosh Bapat. Reviewed by Michael Paquier.
Back-patch to 9.5 where RLS was introduced.
Security: CVE-2016-2193
Fix up check for high-bit-set characters, which provoked "comparison is
always true due to limited range of data type" warnings on some compilers,
and was unlike the way we do it elsewhere anyway. Fix omission of "$"
from the set of valid identifier continuation characters. Get rid of
sanitize_text(), which was utterly inconsistent with any other error report
anywhere in the system, and wasn't even well designed on its own terms
(double-quoting the result string without escaping contained double quotes
doesn't seem very well thought out). Fix up error messages, which didn't
follow the message style guidelines very well, and were overly specific in
situations where the actual mistake might not be what they said. Improve
documentation.
(I started out just intending to fix the compiler warning, but the more
I looked at the patch the less I liked it.)
This avoids leaving dangling links in pg_operator; which while fairly
harmless are also unsightly.
While we're at it, simplify OperatorUpd, which went through
heap_modify_tuple for no very good reason considering it had already made
a tuple copy it could just scribble on.
Roma Sokolov, reviewed by Tomas Vondra, additional hacking by Robert Haas
and myself.
In commit 9118d03a8c we taught the planner to postpone evaluation of
set-returning functions in a SELECT's targetlist until after any sort done
to satisfy ORDER BY. However, if we postpone some SRFs this way while
others do not get postponed (because they're sort or group key columns)
we will break the traditional behavior by which all SRFs in the tlist run
in-step during ExecTargetList(), so that you get the least common multiple
of their periods not the product. Fix make_sort_input_target() so it will
not split up SRF evaluation in such cases.
There is still a hazard of similar odd behavior if there's a SRF in a
grouping column and another one that isn't, but that was true before
and we're just trying to preserve bug-compatibility with the traditional
behavior. This whole area is overdue to be rethought and reimplemented,
but we'll try to avoid changing behavior until then.
Per report from Regina Obe.
This enables external code to create access methods. This is useful so
that extensions can add their own access methods which can be formally
tracked for dependencies, so that DROP operates correctly. Also, having
explicit support makes pg_dump work correctly.
Currently only index AMs are supported, but we expect different types to
be added in the future.
Authors: Alexander Korotkov, Petr Jelínek
Reviewed-By: Teodor Sigaev, Petr Jelínek, Jim Nasby
Commitfest-URL: https://commitfest.postgresql.org/9/353/
Discussion: https://www.postgresql.org/message-id/CAPpHfdsXwZmojm6Dx+TJnpYk27kT4o7Ri6X_4OSWcByu1Rm+VA@mail.gmail.com
User-facing (even tested by regression tests) error conditions were thrown
with elog(), hence had wrong SQLSTATE and were untranslatable. And the
error message texts weren't up to project style, either.
In commit afb9249d06, we (probably I) made ExecLockRows assign
null test tuples to all relations of the query while setting up to do an
EvalPlanQual recheck for a newly-updated locked row. This was sheerest
brain fade: we should only set test tuples for relations that are lockable
by the LockRows node, and in particular empty test tuples are only sensible
for inheritance child relations that weren't the source of the current
tuple from their inheritance tree. Setting a null test tuple for an
unrelated table causes it to return NULLs when it should not, as exhibited
in bug #14034 from Bronislav Houdek. To add insult to injury, doing it the
wrong way required two loops where one would suffice; so the corrected code
is even a bit shorter and faster.
Add a regression test case based on his example, and back-patch to 9.5
where the bug was introduced.
The distinction between "archive" and "hot_standby" existed only because
at the time "hot_standby" was added, there was some uncertainty about
stability. This is now a long time ago. We would like to move forward
with simplifying the replication configuration, but this distinction is
in the way, because a primary server cannot tell (without asking a
standby or predicting the future) which one of these would be the
appropriate level.
Pick a new name for the combined setting to make it clearer that it
covers all (non-logical) backup and replication uses. The old values
are still accepted but are converted internally.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: David Steele <david@pgmasters.net>
In HEAD, fix incorrect field width for hours part of OF when tm_gmtoff is
negative. This was introduced by commit 2d87eedc1d as a result of
falsely applying a pattern that's correct when + signs are omitted, which
is not the case for OF.
In 9.4, fix missing abs() call that allowed a sign to be attached to the
minutes part of OF. This was fixed in 9.5 by 9b43d73b3f, but for
inscrutable reasons not back-patched.
In all three versions, ensure that the sign of tm_gmtoff is correctly
reported even when the GMT offset is less than 1 hour.
Add regression tests, which evidently we desperately need here.
Thomas Munro and Tom Lane, per report from David Fetter
Tighten the semantics of boundary-case timestamptz so that we allow
timestamps >= '4714-11-24 00:00+00 BC' and < 'ENDYEAR-01-01 00:00+00 AD'
exactly, no more and no less, but it is allowed to enter timestamps
within that range using non-GMT timezone offsets (which could make the
nominal date 4714-11-23 BC or ENDYEAR-01-01 AD). This eliminates
dump/reload failure conditions for timestamps near the endpoints.
To do this, separate checking of the inputs for date2j() from the
final range check, and allow the Julian date code to handle a range
slightly wider than the nominal range of the datatypes.
Also add a bunch of checks to detect out-of-range dates and timestamps
that formerly could be returned by operations such as date-plus-integer.
All C-level functions that return date, timestamp, or timestamptz should
now be proof against returning a value that doesn't pass IS_VALID_DATE()
or IS_VALID_TIMESTAMP().
Vitaly Burovoy, reviewed by Anastasia Lubennikova, and substantially
whacked around by me
There's a lot more that could be done here yet - in particular, this
reports only very coarse-grained information about the index vacuuming
phase - but even as it stands, the new pg_stat_progress_vacuum can
tell you quite a bit about what a long-running vacuum is actually
doing.
Amit Langote and Robert Haas, based on earlier work by Vinayak Pokale
and Rahila Syed.
We don't support any parallel write operations at present, so choosing
a parallel plan causes us to error out. Also, add a new regression
test that uses EXPLAIN ANALYZE SELECT INTO; if we'd had this previously,
force_parallel_mode testing would have caught this issue.
Mithun Cy and Robert Haas
This patch widens SPI_processed, EState's es_processed field, PortalData's
portalPos field, FuncCallContext's call_cntr and max_calls fields,
ExecutorRun's count argument, PortalRunFetch's result, and the max number
of rows in a SPITupleTable to uint64, and deals with (I hope) all the
ensuing fallout. Some of these values were declared uint32 before, and
others "long".
I also removed PortalData's posOverflow field, since that logic seems
pretty useless given that portalPos is now always 64 bits.
The user-visible results are that command tags for SELECT etc will
correctly report tuple counts larger than 4G, as will plpgsql's GET
GET DIAGNOSTICS ... ROW_COUNT command. Queries processing more tuples
than that are still not exactly the norm, but they're becoming more
common.
Most values associated with FETCH/MOVE distances, such as PortalRun's count
argument and the count argument of most SPI functions that have one, remain
declared as "long". It's not clear whether it would be worth promoting
those to int64; but it would definitely be a large dollop of additional
API churn on top of this, and it would only help 32-bit platforms which
seem relatively less likely to see any benefit.
Andreas Scherbaum, reviewed by Christian Ullrich, additional hacking by me
It is frequently useful for volatile, set-returning, or expensive functions
in a SELECT's targetlist to be postponed till after ORDER BY and LIMIT are
done. Otherwise, the functions might be executed for every row of the
table despite the presence of LIMIT, and/or be executed in an unexpected
order. For example, in
SELECT x, nextval('seq') FROM tab ORDER BY x LIMIT 10;
it's probably desirable that the nextval() values are ordered the same
as x, and that nextval() is not run more than 10 times.
In the past, Postgres was inconsistent in this area: you would get the
desirable behavior if the ordering were performed via an indexscan, but
not if it had to be done by an explicit sort step. Getting the desired
behavior reliably required contortions like
SELECT x, nextval('seq')
FROM (SELECT x FROM tab ORDER BY x) ss LIMIT 10;
This patch conditionally postpones evaluation of pure-output target
expressions (that is, those that are not used as DISTINCT, ORDER BY, or
GROUP BY columns) so that they effectively occur after sorting, even if an
explicit sort step is necessary. Volatile expressions and set-returning
expressions are always postponed, so as to provide consistent semantics.
Expensive expressions (costing more than 10 times typical operator cost,
which by default would include any user-defined function) are postponed
if there is a LIMIT or if there are expressions that must be postponed.
We could be more aggressive and postpone any nontrivial expression, but
there are costs associated with doing so: it requires an extra Result plan
node which adds some overhead, and postponement changes the volume of data
going through the sort step, perhaps for the worse. Since we tend not to
have very good estimates of the output width of nontrivial expressions,
it's hard to have much confidence in our ability to predict whether
postponement would increase or decrease the cost of the sort; therefore
this patch doesn't attempt to make decisions conditionally on that.
Between these factors and a general desire not to change query behavior
when there's not a demonstrable benefit, it seems best to be conservative
about applying postponement. We might tweak the decision rules in the
future, though.
Konstantin Knizhnik, heavily rewritten by me
Adds several tsvector editting function: convert tsvector to/from text array,
set weight for given lexemes, delete lexeme(s), unnest, filter lexemes
with given weights
Author: Stas Kelvich with some editorization by me
Reviewers: Tomas Vondram, Teodor Sigaev
When a process is waiting for a heavyweight lock, we will now indicate
the type of heavyweight lock for which it is waiting. Also, you can
now see when a process is waiting for a lightweight lock - in which
case we will indicate the individual lock name or the tranche, as
appropriate - or for a buffer pin.
Amit Kapila, Ildus Kurbangaliev, reviewed by me. Lots of helpful
discussion and suggestions by many others, including Alexander
Korotkov, Vladimir Borodin, and many others.
These simple methods rely on RecursiveCopy to create a filesystem-level
backup of a server. They aren't currently used anywhere yet,but will be
useful for future tests.
Author: Craig Ringer
Reviewed-By: Michael Paquier, Salvador Fandino, Álvaro Herrera
Commitfest-URL: https://commitfest.postgresql.org/9/569/
This allows skipping copying certain files and subdirectories in tests.
This is useful in some circumstances such as copying a data directory;
future tests want this feature.
Also POD-ify the module.
Authors: Craig Ringer, Pallavi Sontakke
Reviewed-By: Álvaro Herrera
An index search using a row comparison such as ROW(a, b) > ROW('x', 'y')
would stop upon reaching a NULL entry in the "b" column, ignoring the
fact that there might be non-NULL "b" values associated with later values
of "a". This happens because _bt_mark_scankey_required() marks the
subsidiary scankey for "b" as required, which is just wrong: it's for
a column after the one with the first inequality key (namely "a"), and
thus can't be considered a required match.
This bit of brain fade dates back to the very beginnings of our support
for indexed ROW() comparisons, in 2006. Kind of astonishing that no one
came across it before Glen Takahashi, in bug #14010.
Back-patch to all supported versions.
Note: the given test case doesn't actually fail in unpatched 9.1, evidently
because the fix for bug #6278 (i.e., stopping at nulls in either scan
direction) is required to make it fail. I'm sure I could devise a case
that fails in 9.1 as well, perhaps with something involving making a cursor
back up; but it doesn't seem worth the trouble.
I've been saying we needed to do this for more than five years, and here it
finally is. This patch removes the ever-growing tangle of spaghetti logic
that grouping_planner() used to use to try to identify the best plan for
post-scan/join query steps. Now, there is (nearly) independent
consideration of each execution step, and entirely separate construction of
Paths to represent each of the possible ways to do that step. We choose
the best Path or set of Paths using the same add_path() logic that's been
used inside query_planner() for years.
In addition, this patch removes the old restriction that subquery_planner()
could return only a single Plan. It now returns a RelOptInfo containing a
set of Paths, just as query_planner() does, and the parent query level can
use each of those Paths as the basis of a SubqueryScanPath at its level.
This allows finding some optimizations that we missed before, wherein a
subquery was capable of returning presorted data and thereby avoiding a
sort in the parent level, making the overall cost cheaper even though
delivering sorted output was not the cheapest plan for the subquery in
isolation. (A couple of regression test outputs change in consequence of
that. However, there is very little change in visible planner behavior
overall, because the point of this patch is not to get immediate planning
benefits but to create the infrastructure for future improvements.)
There is a great deal left to do here. This patch unblocks a lot of
planner work that was basically impractical in the old code structure,
such as allowing FDWs to implement remote aggregation, or rewriting
plan_set_operations() to allow consideration of multiple implementation
orders for set operations. (The latter will likely require a full
rewrite of plan_set_operations(); what I've done here is only to fix it
to return Paths not Plans.) I have also left unfinished some localized
refactoring in createplan.c and planner.c, because it was not necessary
to get this patch to a working state.
Thanks to Robert Haas, David Rowley, and Amit Kapila for review.
Historically, the wait_for_stats() function in this test has simply checked
for a report of an indexscan on tenk2, corresponding to the last command
issued before we expect stats updates to appear. However, with parallel
query that indexscan could be done by a parallel worker that will emit
its stats counters to the collector before the session's main backend does
(a full second before, in fact, thanks to the "pg_sleep(1.0)" added by
commit 957d08c81f). That leaves a sizable window in which an
autovacuum-triggered write of the stats files would present a state in
which the indexscan on tenk2 appears to have been done, but none of the
write updates performed by the test have been. This is evidently the
explanation for intermittent failures seen by me and on buildfarm member
mandrill.
To fix, we should check separately for both the tenk2 seqscan and indexscan
counts, since those might be reported by different processes that could be
delayed arbitrarily on an overloaded test machine. And we need to check
for at least one update-related count. If we ever allow parallel workers
to do writes, this will get even more complicated ... but in view of all
the other hard problems that will entail, I don't feel a need to solve this
one today.
Per research by Rahila Syed and myself; part of this patch is Rahila's.
Now it's possible to load recent version of Hunspell for several languages.
To handle these dictionaries Hunspell patch adds support for:
* FLAG long - sets the double extended ASCII character flag type
* FLAG num - sets the decimal number flag type (from 1 to 65535)
* AF parameter - alias for flag's set
Also it moves test dictionaries into separate directory.
Author: Artur Zakirov with editorization by me
This makes the psql() method much more capable: it captures both stdout
and stderr; it now returns the psql exit code rather than stdout; a
timeout can now be specified, as can ON_ERROR_STOP behavior; it gained a
new "on_error_die" (defaulting to off) parameter to raise an exception
if there's any problem. Finally, additional parameters to psql can be
passed if there's need for further tweaking.
For convenience, a new safe_psql() method retains much of the old
behavior of psql(), except that it uses on_error_die on, so that
problems like syntax errors in SQL commands can be detected more easily.
Many existing TAP test files now use safe_psql, which is what is really
wanted. A couple of ->psql() calls are now added in the commit_ts
tests, which verify that the right thing is happening on certain errors.
Some ->command_fails() calls in recovery tests that were verifying that
psql failed also became ->psql() calls now.
Author: Craig Ringer. Some tweaks by Álvaro Herrera
Reviewed-By: Michaël Paquier
Also, mention in README that Perl files should be perltidy'ed. This
isn't really the best place (since we have Perl files elsewhere in the
tree) and this is already in pgindent's README, but this subdir is
likely to get hacked a whole lot more than the other Perl files, so it
seems okay to spend two lines on this.
Author: Craig Ringer
One test was relying on method remove_tree that isn't implemented in the
oldest Perl we support; fix it by using the older rmtree instead.
Another test had a typo in a SQL command, which isn't noticed because
the PostgresNode->psql() method doesn't check that queries return
correctly. That's undesirable and will also be fixed later on, but for
now let's make the test actually work.
Author: Craig Ringer
A thinko concerning nesting depth caused json_to_record() to produce bogus
output if a field of its input object contained a sub-object with a field
name matching one of the requested output column names. Per bug #13996
from Johann Visagie.
I added a regression test case based on his example, plus parallel tests
for json_to_recordset, jsonb_to_record, jsonb_to_recordset. The latter
three do not exhibit the same bug (which suggests that we may be missing
some opportunities to share code...) but testing seems like a good idea
in any case.
Back-patch to 9.4 where these functions were introduced.
This makes it easier to relate the temporary data dirs to each node in
a test script.
Author: Kyotaro Horiguchi
Reviewed-By: Craig Ringer, Alvaro Herrera
Commit 7132810c (Retain tempdirs for failed tests) used Test::More's
is_passing method, but that was added in Test::More 0.89_01 which is
sometime later than Perl 5.10.1. Popular platforms such as RHEL6 don't
have that, nevermind some of our older dinosaurs. Do it the hard way.
Michael Paquier, based on research by Craig Ringer
These tests verify that 1) WAL replay preserves the stored value,
2) a streaming standby server replays the value obtained from the
master, and 3) the behavior is sensible in the face of repeated
configuration changes.
One annoyance is that tmp_check/ subdir from the TAP tests is clobbered
when the pg_regress test runs in the same subdirectory. This is
bothersome but not too terrible a problem, since the pg_regress test is
not run anyway if the TAP tests fail (unless "make -k" is used).
I had these tests around since commit 69e7235c93e2; add them now that we
have the recovery test framework in place.
I noticed that the async-notify test results in log messages like these:
LOG: could not send data to client: Broken pipe
FATAL: connection to client lost
This is because it unceremoniously disconnects a client session that is
about to have some NOTIFY messages delivered to it. Such log messages
during a regression test might well cause people to go looking for a
problem that doesn't really exist (it did cause me to waste some time that
way). We can shut it up by adding an UNLISTEN command to session teardown.
Patch HEAD only; this doesn't seem significant enough to back-patch.
The original coding of the test was relying too much on the ordering in
which backends are awakened once an advisory lock which they wait for is
released. Change the code so that each backend uses its own advisory
lock instead, so that the output becomes stable. Also add a few seconds
of sleep between lock releases, so that the test isn't broken in
overloaded buildfarm animals, as suggested by Tom Lane.
Per buildfarm members spoonbill and guaibasaurus.
Discussion: https://www.postgresql.org/message-id/19294.1456551587%40sss.pgh.pa.us
When converting an RTE with securityQuals into a security barrier
subquery RTE, ensure that the Vars in the new subquery's targetlist
all have varlevelsup = 0 so that they correctly refer to the
underlying base relation being wrapped.
The original code was creating new Vars by copying them from existing
Vars referencing the base relation found elsewhere in the query, but
failed to account for the fact that such Vars could come from sublink
subqueries, and hence have varlevelsup > 0. In practice it looks like
this could only happen with nested security barrier views, where the
outer view has a WHERE clause containing a correlated subquery, due to
the order in which the Vars are processed.
Bug: #13988
Reported-by: Adam Guthrie
Backpatch-to: 9.4, where updatable SB views were introduced
In 0e5680f473, I fixed a bug in heapam that caused spurious deadlocks
when multiple updates concurrently attempted to modify the old version
of an updated tuple whose new version was key-share locked. I proposed
an isolationtester spec file that reproduced the bug, but back then
isolationtester wasn't mature enough to be able to run it. Now that
38f8bdcac4 is in the tree, we can have this spec file too.
Discussion: https://www.postgresql.org/message-id/20141212205254.GC1768%40alvh.no-ip.org
I applied the previous-to-last revision of Michaël's submitted patch
instead of the last; these two tweaks pointed out by Craig were left out
of the previous commit by accident.
Some code in the RewindTest test suite is more generally useful than
just for that suite, so put it where other test suites can reach it.
Some postgresql.conf parameters change their default values when a
cluster is initialized with 'allows_streaming' than the previous
behavior; most notably, autovacuum is no longer turned off.
(Also, we no longer call pg_ctl promote with -w, but that flag doesn't
actually do anything in promote so there's no behavior change.)
Author: Michael Paquier
Also, the dump_info method got split into another method that returns
the stuff as a string instead of just printing it to stdout.
Add a new README in src/test/perl too.
Author: Craig Ringer
Reviewed by: Michaël Paquier
This patch introduces "pg_blocking_pids(int) returns int[]", which returns
the PIDs of any sessions that are blocking the session with the given PID.
Historically people have obtained such information using a self-join on
the pg_locks view, but it's unreasonably tedious to do it that way with any
modicum of correctness, and the addition of parallel queries has pretty
much broken that approach altogether. (Given some more columns in the view
than there are today, you could imagine handling parallel-query cases with
a 4-way join; but ugh.)
The new function has the following behaviors that are painful or impossible
to get right via pg_locks:
1. Correctly understands which lock modes block which other ones.
2. In soft-block situations (two processes both waiting for conflicting lock
modes), only the one that's in front in the wait queue is reported to
block the other.
3. In parallel-query cases, reports all sessions blocking any member of
the given PID's lock group, and reports a session by naming its leader
process's PID, which will be the pg_backend_pid() value visible to
clients.
The motivation for doing this right now is mostly to fix the isolation
tests. Commit 38f8bdcac4 lobotomized
isolationtester's is-it-waiting query by removing its ability to recognize
nonconflicting lock modes, as a crude workaround for the inability to
handle soft-block situations properly. But even without the lock mode
tests, the old query was excessively slow, particularly in
CLOBBER_CACHE_ALWAYS builds; some of our buildfarm animals fail the new
deadlock-hard test because the deadlock timeout elapses before they can
probe the waiting status of all eight sessions. Replacing the pg_locks
self-join with use of pg_blocking_pids() is not only much more correct, but
a lot faster: I measure it at about 9X faster in a typical dev build with
Asserts, and 3X faster in CLOBBER_CACHE_ALWAYS builds. That should provide
enough headroom for the slower CLOBBER_CACHE_ALWAYS animals to pass the
test, without having to lengthen deadlock_timeout yet more and thus slow
down the test for everyone else.
Some over-eager copy-and-pasting on my part resulted in a nonsense
result being returned in this case. I have adopted the same pattern for
handling this case as is used in the one argument form of the function,
i.e. we just skip over the code that adds values to the object.
Diagnosis and patch from Michael Paquier, although not quite his
solution.
Fixes bug #13936.
Backpatch to 9.5 where jsonb_object was introduced.
This will parse strings in the format produced by pg_size_pretty() and
return sizes in bytes. This allows queries to be written with clauses
like "pg_total_relation_size(oid) > pg_size_bytes('10 GB')".
Author: Pavel Stehule with various improvements by Vitaly Burovoy
Discussion: http://www.postgresql.org/message-id/CAFj8pRD-tGoDKnxdYgECzA4On01_uRqPrwF-8LdkSE-6bDHp0w@mail.gmail.com
Reviewed-by: Vitaly Burovoy, Oleksandr Shulgin, Kyotaro Horiguchi,
Michael Paquier and Robert Haas
Up to now, there's been an assumption that all Paths for a given relation
compute the same output column set (targetlist). However, there are good
reasons to remove that assumption. For example, an indexscan on an
expression index might be able to return the value of an expensive function
"for free". While we have the ability to generate such a plan today in
simple cases, we don't have a way to model that it's cheaper than a plan
that computes the function from scratch, nor a way to create such a plan
in join cases (where the function computation would normally happen at
the topmost join node). Also, we need this so that we can have Paths
representing post-scan/join steps, where the targetlist may well change
from one step to the next. Therefore, invent a "struct PathTarget"
representing the columns we expect a plan step to emit. It's convenient
to include the output tuple width and tlist evaluation cost in this struct,
and there will likely be additional fields in future.
While Path nodes that actually do have custom outputs will need their own
PathTargets, it will still be true that most Paths for a given relation
will compute the same tlist. To reduce the overhead added by this patch,
keep a "default PathTarget" in RelOptInfo, and allow Paths that compute
that column set to just point to their parent RelOptInfo's reltarget.
(In the patch as committed, actually every Path is like that, since we
do not yet have any cases of custom PathTargets.)
I took this opportunity to provide some more-honest costing of
PlaceHolderVar evaluation. Up to now, the assumption that "scan/join
reltargetlists have cost zero" was applied not only to Vars, where it's
reasonable, but also PlaceHolderVars where it isn't. Now, we add the eval
cost of a PlaceHolderVar's expression to the first plan level where it can
be computed, by including it in the PathTarget cost field and adding that
to the cost estimates for Paths. This isn't perfect yet but it's much
better than before, and there is a way forward to improve it more. This
costing change affects the join order chosen for a couple of the regression
tests, changing expected row ordering.
Move and refactor the underlying code for the pg_config client
application to src/common in support of sharing it with a new
system information SRF called pg_config() which makes the same
information available via SQL. Additionally wrap the SRF with a
new system view, as called pg_config.
Patch by me with extensive input and review by Michael Paquier
and additional review by Alvaro Herrera.
The previous value of 5s is inadequate for the buildfarm's
CLOBBER_CACHE_ALWAYS animals: they take long enough to do the is-it-waiting
queries that the timeout expires, allowing the database state to change,
before isolationtester is done looking. Perhaps 10s will be enough.
(If it isn't, I'm inclined to reduce the number of sessions involved.)
This mostly reverts commit 9c9782f066.
I left in the parts that rearranged removal of completed waiting steps;
but the idea of not rechecking a step's blocked-ness isn't working.
It turns out that there is a second race condition in the new deadlock-hard
test: once the deadlock detector fires, it's uncertain whether step s7a8 or
step s8a1 will report first, because killing s8's transaction unblocks s7.
So far, s7 has only been seen to report first in CLOBBER_CACHE_ALWAYS
builds, but it's pretty reproducible there, and in theory it should
sometimes occur in normal builds too. If s7 were a bit slower than usual,
that could also break the test, since the existing expected-file assumes
that we'll see s7a8 report the first time we check it after s8a1 completes.
To fix, add a post-lock delay to s7a8.
If we're retrying a step, then we already decided it was blocked on a lock,
and there's no need to recheck that. The original coding of commit
38f8bdcac4 resulted in a large number of
is-it-waiting queries when dealing with multiple concurrently-blocked
sessions, which is fairly pointless and also results in test failures in
CLOBBER_CACHE_ALWAYS builds, where the is-it-waiting query is quite slow.
This definition also permits appending pg_sleep() calls to steps where it's
needed to control the order of finish of concurrent steps. Before, that
did not work nicely because we'd decide that a step performing a sleep was
not blocked and hang up waiting for it to finish, rather than noticing the
completion of the concurrent step we're supposed to notice first.
In passing, revise handling of removal of completed waiting steps
to make it a bit less messy.
The new deadlock-soft-2 test has a timing dependency too: it supposes
that isolationtester will detect step s1b as waiting before the deadlock
detector runs and grants it the lock. Adjust deadlock_timeout to ensure
that that's true even in CLOBBER_CACHE_ALWAYS builds, where the wait
detection query is quite slow. Per buildfarm member jaguarundi.
If a GROUP BY clause includes all columns of a non-deferred primary key,
as well as other columns of the same relation, those other columns are
redundant and can be dropped from the grouping; the pkey is enough to
ensure that each row of the table corresponds to a separate group.
Getting rid of the excess columns will reduce the cost of the sorting or
hashing needed to implement GROUP BY, and can indeed remove the need for
a sort step altogether.
This seems worth testing for since many query authors are not aware of
the GROUP-BY-primary-key exception to the rule about queries not being
allowed to reference non-grouped-by columns in their targetlists or
HAVING clauses. Thus, redundant GROUP BY items are not uncommon. Also,
we can make the test pretty cheap in most queries where it won't help
by not looking up a rel's primary key until we've found that at least
two of its columns are in GROUP BY.
David Rowley, reviewed by Julien Rouhaud
The original formulation of 4c9864b9b4
was extremely timing-sensitive, because it arranged for the deadlock
detector to be running (and possibly unblocking the current query)
at almost exactly the same time as isolationtester would be probing
to see if the query is blocked. The committed expected-file assumed
that the deadlock detection would finish first, but we see the opposite
on both fast and slow buildfarm animals. Adjust the deadlock timeout
settings to make it predictable that isolationtester *will* see the
query as waiting before deadlock detection unblocks it.
I used a 5s timeout for the same reasons mentioned in
a7921f71a3.
Fix a few oversights in 38f8bdcac4:
don't leak memory in run_permutation(), remember when we've issued
a cancel rather than issuing another one every 10ms,
fix some typos in comments.
This allows testing of deadlock scenarios. Scenarios that would
previously have been considered invalid are now simply taken as a
scenario in which more than one backend will wait.
This is a necessary prerequisite for forthcoming changes to allow deadlock
scenarios to be tested by the isolation tester. It is also a good idea on
general principle, since these scenarios add no useful test coverage not
provided by other scenarios, but do to take time to execute.
Thirty seconds was not consistently enough for promotion to complete on
buildfarm members sungazer and tern. Experiments suggest 43s would have
been enough. Back-patch to 9.5, where pg_rewind was introduced.
Previously, our regex code defined CHR_MAX as 0xfffffffe, which is a
bad choice because it is outside the range of type "celt" (int32).
Characters approaching that limit could lead to infinite loops in logic
such as "for (c = a; c <= b; c++)" where c is of type celt but the
range bounds are chr. Such loops will work safely only if CHR_MAX+1
is representable in celt, since c must advance to beyond b before the
loop will exit.
Fortunately, there seems no reason not to restrict CHR_MAX to 0x7ffffffe.
It's highly unlikely that Unicode will ever assign codes that high, and
none of our other backend encodings need characters beyond that either.
In addition to modifying the macro, we have to explicitly enforce character
range restrictions on the values of \u, \U, and \x escape sequences, else
the limit is trivially bypassed.
Also, the code for expanding case-independent character ranges in bracket
expressions had a potential integer overflow in its calculation of the
number of characters it could generate, which could lead to allocating too
small a character vector and then overwriting memory. An attacker with the
ability to supply arbitrary regex patterns could easily cause transient DOS
via server crashes, and the possibility for privilege escalation has not
been ruled out.
Quite aside from the integer-overflow problem, the range expansion code was
unnecessarily inefficient in that it always produced a result consisting of
individual characters, abandoning the knowledge that we had a range to
start with. If the input range is large, this requires excessive memory.
Change it so that the original range is reported as-is, and then we add on
any case-equivalent characters that are outside that range. With this
approach, we can bound the number of individual characters allowed without
sacrificing much. This patch allows at most 100000 individual characters,
which I believe to be more than the number of case pairs existing in
Unicode, so that the restriction will never be hit in practice.
It's still possible for range() to take awhile given a large character code
range, so also add statement-cancel detection to its loop. The downstream
function dovec() also lacked cancel detection, and could take a long time
given a large output from range().
Per fuzz testing by Greg Stark. Back-patch to all supported branches.
Security: CVE-2016-0773
Commit 7f46eaf added the regression test which checks that
gin_clean_pending_list() cleans up the GIN pending list and returns >0.
This usually works fine. But if autovacuum comes along and cleans
the list before gin_clean_pending_list() starts, the function may
return 0, and then the regression test may fail.
To fix the problem, this commit disables autovacuum on the target
index of gin_clean_pending_list() by setting autovacuum_enabled
reloption to off when creating the table.
Also this commit sets gin_pending_list_limit reloption to 4MB on
the target index. Otherwise when running "make installcheck" with
small gin_pending_list_limit GUC, insertions of data may trigger
the cleanup of pending list before gin_clean_pending_list() starts
and the function may return 0. This could cause the regression test
to fail.
Per buildfarm member spoonbill.
Reported-By: Tom Lane
In 61444bfb we started to allow HAVING clauses to be fully pushed down
into WHERE, even when grouping sets are in use. That turns out not to
work correctly, because grouping sets can "produce" NULLs, meaning that
filtering in WHERE and HAVING can have different results, even when no
aggregates or volatile functions are involved.
Instead only allow pushdown of empty grouping sets.
It'd be nice to do better, but the exact mechanics of deciding which
cases are safe are still being debated. It's important to give correct
results till we find a good solution, and such a solution might not be
appropriate for backpatching anyway.
Bug: #13863
Reported-By: 'wrb'
Diagnosed-By: Dean Rasheed
Author: Andrew Gierth
Reviewed-By: Dean Rasheed and Andres Freund
Discussion: 20160113183558.12989.56904@wrigleys.postgresql.org
Backpatch: 9.5, where grouping sets were introduced
The parser doesn't allow qualification of column names appearing in
these clauses, but ruleutils.c would sometimes qualify them, leading
to dump/reload failures. Per bug #13891 from Onder Kalaci.
(In passing, make stanzas in ruleutils.c that save/restore varprefix
more consistent.)
Peter Geoghegan
Commit 45f6240a8f added an assumption in ExecHashIncreaseNumBatches
and ExecHashIncreaseNumBuckets that they could find all tuples in the main
hash table by iterating over the "dense storage" introduced by that patch.
However, ExecHashRemoveNextSkewBucket continued its old practice of simply
re-linking deleted skew tuples into the main table's hashchains. Hence,
such tuples got lost during any subsequent increase in nbatch or nbuckets,
and would never get joined, as reported in bug #13908 from Seth P.
I (tgl) think that the aforesaid commit has got multiple design issues
and should be reworked rather completely; but there is no time for that
right now, so band-aid the problem by making ExecHashRemoveNextSkewBucket
physically copy deleted skew tuples into the "dense storage" arena.
The added test case is able to exhibit the problem by means of fooling the
planner with a WHERE condition that it will underestimate the selectivity
of, causing the initial nbatch estimate to be too small.
Tomas Vondra and Tom Lane. Thanks to David Johnston for initial
investigation into the bug report.
An example use-case is "CHECK(num_nonnulls(a,b,c) = 1)" to assert that
exactly one of a,b,c isn't NULL. The functions are variadic, so they
can also be pressed into service to count the number of null or nonnull
elements in an array.
Marko Tiikkaja, reviewed by Pavel Stehule
This function cleans up the pending list of the GIN index by
moving entries in it to the main GIN data structure in bulk.
It returns the number of pages cleaned up from the pending list.
This function is useful, for example, when the pending list
needs to be cleaned up *quickly* to improve the performance of
the search using GIN index. VACUUM can do the same thing, too,
but it may take days to run on a large table.
Jeff Janes,
reviewed by Julien Rouhaud, Jaime Casanova, Alvaro Herrera and me.
Discussion: CAMkU=1x8zFkpfnozXyt40zmR3Ub_kHu58LtRmwHUKRgQss7=iQ@mail.gmail.com
The buildfarm isn't very happy with the results of commit e1bd684a34.
To try to get the expected exact results everywhere:
* Replace M_PI / 180 subexpressions with a precomputed constant, so that
the compiler can't decide to rearrange that division with an adjacent
operation. Hopefully this will fix failures to get exactly 0.5 from
sind(30) and cosd(60).
* Add scaling to ensure that tand(45) and cotd(45) give exactly 1; there
was nothing particularly guaranteeing that before.
* Replace minus zero by zero when tand() or cotd() would output that;
many machines did so for tand(180) and cotd(270), but not all. We could
alternatively deem both results valid, but that doesn't seem likely to
be what users will want.
The implementations go to some lengths to deliver exact results for values
where an exact result can be expected, such as sind(30) = 0.5 exactly.
Dean Rasheed, reviewed by Michael Paquier
Historically, extract() just returned zero for any case involving an
infinite timestamp[tz] input; even cases in which the unit name was
invalid. This is not very sensible. Instead, return infinity or
-infinity as appropriate when the requested field is one that is
monotonically increasing (e.g, year, epoch), or NULL when it is not
(e.g., day, hour). Also, throw the expected errors for bad unit names.
BACKWARDS INCOMPATIBLE CHANGE
Vitaly Burovoy, reviewed by Vik Fearing
The amvalidate functions added in commit 65c5fcd353 were on the
crude side. Improve them in a few ways:
* Perform signature checking for operators and support functions.
* Apply more thorough checks for missing operators and functions,
where possible.
* Instead of reporting problems as ERRORs, report most problems as INFO
messages and make the amvalidate function return FALSE. This allows
more than one problem to be discovered per run.
* Report object names rather than OIDs, and work a bit harder on making
the messages understandable.
Also, remove a few more opr_sanity regression test queries that are
now superseded by the amvalidate checks.
Aggregate nodes now have two new modes: a "partial" mode where they
output the unfinalized transition state, and a "finalize" mode where
they accept unfinalized transition states rather than individual
values as input.
These new modes are not used anywhere yet, but they will be necessary
for parallel aggregation. The infrastructure also figures to be
useful for cases where we want to aggregate local data and remote
data via the FDW interface, and want to bring back partial aggregates
from the remote side that can then be combined with locally generated
partial aggregates to produce the final value. It may also be useful
even when neither FDWs nor parallelism are in play, as explained in
the comments in nodeAgg.c.
David Rowley and Simon Riggs, reviewed by KaiGai Kohei, Heikki
Linnakangas, Haribabu Kommi, and me.
The conventions specified by the GiST SGML documentation were widely
ignored. For example, the strategy-number argument for "consistent" and
"distance" functions is specified to be a smallint, but most of the
built-in support functions declared it as an integer, and for that matter
the core code passed it using Int32GetDatum not Int16GetDatum. None of
that makes any real difference at runtime, but it's quite confusing for
newcomers to the code, and it makes it very hard to write an amvalidate()
function that checks support function signatures. So let's try to instill
some consistency here.
Another similar issue is that the "query" argument is not of a single
well-defined type, but could have different types depending on the strategy
(corresponding to search operators with different righthand-side argument
types). Some of the functions threw up their hands and declared the query
argument as being of "internal" type, which surely isn't right ("any" would
have been more appropriate); but the majority position seemed to be to
declare it as being of the indexed data type, corresponding to a search
operator with both input types the same. So I've specified a convention
that that's what to do always.
Also, the result of the "union" support function actually must be of the
index's storage type, but the documentation suggested declaring it to
return "internal", and some of the functions followed that. Standardize
on telling the truth, instead.
Similarly, standardize on declaring the "same" function's inputs as
being of the storage type, not "internal".
Also, somebody had forgotten to add the "recheck" argument to both
the documentation of the "distance" support function and all of their
SQL declarations, even though the C code was happily using that argument.
Clean that up too.
Fix up some other omissions in the docs too, such as documenting that
union's second input argument is vestigial.
So far as the errors in core function declarations go, we can just fix
pg_proc.h and bump catversion. Adjusting the erroneous declarations in
contrib modules is more debatable: in principle any change in those
scripts should involve an extension version bump, which is a pain.
However, since these changes are purely cosmetic and make no functional
difference, I think we can get away without doing that.
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
I noticed that the sanity checks in the regression tests omitted to
check a couple of "poor man's enum" columns that you'd reasonably
expect them to check.
There are other "char"-type columns in system catalogs that are not
covered by either type_sanity or opr_sanity, e.g. pg_rewrite.ev_type.
However, those catalogs are not populated with any manually-created
data during bootstrap, so it seems less necessary to check them
this way.
Given syntactically wrong input, widget_in() could call atof() with an
indeterminate pointer argument, typically leading to a crash; or if it
didn't do that, it might return a NULL pointer, which again would lead
to a crash since old-style C functions aren't supposed to do things
that way. Fix that by correcting the off-by-one syntax test and
throwing a proper error rather than just returning NULL.
Also, since widget_in and widget_out have been marked STRICT for a
long time, their tests for null inputs are just dead code; remove 'em.
In the oldest branches, also improve widget_out to use snprintf not
sprintf, just to be sure.
In passing, get rid of a long-since-useless sprintf into a local buffer
that nothing further is done with, and make some other minor coding
style cleanups.
In the intended regression-testing usage of these functions, none of
this is very significant; but if the regression test database were
left around in a production installation, these bugs could amount
to a minor security hazard.
Piotr Stefaniak, Michael Paquier, and Tom Lane
These functions readily crash when passed a NULL input value. The tests
themselves do not pass NULL values to them; but when the regression
database is used as a basis for fuzz testing, they cause a lot of noise.
Also, if someone were to leave a regression database lying about in a
production installation, these would create a minor security hazard.
Andreas Seltenreich
This new view provides insight into the state of a running WAL receiver
in a HOT standby node.
The information returned includes the PID of the WAL receiver process,
its status (stopped, starting, streaming, etc), start LSN and TLI, last
received LSN and TLI, timestamp of last message send and receipt, latest
end-of-WAL LSN and time, and the name of the slot (if any).
Access to the detailed data is only granted to superusers; others only
get the PID.
Author: Michael Paquier
Reviewer: Haribabu Kommi
In commit 921191912c I claimed that we weren't testing encoding
conversion functions, but further poking around reveals that we did
have an equivalent though hard-wired set of tests in conversion.sql.
AFAICS there is no advantage to doing it like that as compared to letting
the catalog contents drive the test, so let the opr_sanity addition stand
and remove the now-redundant tests in conversion.sql.
Also, remove some infrastructure in src/backend/utils/mb/conversion_procs
for building conversion.sql's list of tests. That was unmaintained, and
had not corresponded to the actual contents of conversion.sql since 2007
or perhaps even further back.
In light of commit ea0d494dae, it seems like a good idea to add
a regression test that will complain about random functions taking or
returning cstring. Only I/O support functions and encoding conversion
functions should be declared that way.
While at it, add some checks that encoding conversion functions are
declared properly. Since pg_conversion isn't populated manually,
it's not quite as necessary to check its contents as it is for catalogs
like pg_proc; but one thing we definitely have not tested in the past
is whether the identified conproc for a conversion actually does that
conversion vs. some other one.
Some time back we agreed that row_security=off should not be a way to
bypass RLS entirely, but only a way to get an error if it was being
applied. However, the code failed to act that way for table owners.
Per discussion, this is a must-fix bug for 9.5.0.
Adjust the logic in rls.c to behave as expected; also, modify the
error message to be more consistent with the new interpretation.
The regression tests need minor corrections as well. Also update
the comments about row_security in ddl.sgml to be correct. (The
official description of the GUC in config.sgml is already correct.)
I failed to resist the temptation to do some other very minor
cleanup as well, such as getting rid of a duplicate extern declaration.
Aside from any consistency arguments, this is logically necessary because
the I/O functions for these types also handle numeric OID values. Without
a quoting rule it is impossible to distinguish numeric OIDs from role or
namespace names that happen to contain only digits.
Also change the to_regrole and to_regnamespace functions to dequote their
arguments. While not logically essential, this seems like a good idea
since the other to_reg* functions do it. Anyone who really wants raw
lookup of an uninterpreted name can fall back on the time-honored solution
of (SELECT oid FROM pg_namespace WHERE nspname = whatever).
Report and patch by Jim Nasby, reviewed by Michael Paquier
On closer inspection, the reason copyright.pl was missing files is
that it is looking for 'Copyright (c)' and they had 'Copyright (C)'.
Fix that, and update a couple more that grepping for that revealed.
Fix an oversight in commit 321eed5f0f: replacing an operator's
selectivity functions needs to result in a corresponding update in
pg_depend. We have a function that can handle that, but it was not
called by AlterOperator().
To fix this without enlarging pg_operator.h's #include list beyond
what clients can safely include, split off the function definitions
into a new file pg_operator_fn.h, similarly to what we've done for
some other catalog header files. It's not entirely clear whether
any client-side code needs to include pg_operator.h, but it seems
prudent to assume that there is some such code somewhere.
As of commit d5563d7df, psql -c no longer implies -X, but not all of
our regression testing scripts had gotten that memo.
To ensure consistency of results across different developers, make
sure that *all* invocations of psql in all scripts in our tree
use -X, even where this is not what previously happened.
Michael Paquier and Tom Lane
MergeAttributes() rejects cases where columns to be merged have the same
type but different typmod, which is correct; but the error message it
printed didn't show either typmod, which is unhelpful. Changing this
requires using format_type_with_typemod() in place of TypeNameToString(),
which will have some minor side effects on the way some type names are
printed, but on balance this is an improvement: the old code sometimes
printed one type according to one set of rules and the other type according
to the other set, which could be confusing in its own way.
Oddly, there were no regression test cases covering any of this behavior,
so add some.
Complaint and fix by Amit Langote
brin_summarize_new_values() did not check that the passed OID was for
an index at all, much less that it was a BRIN index, and would fail in
obscure ways if it wasn't (possibly damaging data first?). It also
lacked any permissions test; by analogy to VACUUM, we should only allow
the table's owner to summarize.
Noted by Jeff Janes, fix by Michael Paquier and me
Omitted boundaries represent the upper or lower limit of the corresponding
array subscript. This allows simpler specification of many common
use-cases.
(Revised version of commit 9246af6799)
YUriy Zhuravlev
Rather than expect the Query returned by get_view_query() to be
read-only and then copy bits and pieces of it out, simply copy the
entire structure when we get it. This addresses an issue where
AcquireRewriteLocks, which is called by acquireLocksOnSubLinks(),
scribbles on the parsetree passed in, which was actually an entry
in relcache, leading to segfaults with certain view definitions.
This also future-proofs us a bit for anyone adding more code to this
path.
The acquireLocksOnSubLinks() was added in commit c3e0ddd40.
Back-patch to 9.3 as that commit was.
Commit e5e11c8cc added a bunch of EXPLAIN statements without COSTS OFF
to the regression tests. This is contrary to project policy since it
results in unnecessary platform dependencies in the output (it's just
luck that we didn't get buildfarm failures from it). Per gripe from
Mike Wilson.
This is necessary so that REASSIGN OWNED does the right thing with
composite types, to wit, that it also alters ownership of the type's
pg_class entry -- previously, the pg_class entry remained owned by the
original user, which caused later other failures such as the new owner's
inability to use ALTER TYPE to rename an attribute of the affected
composite. Also, if the original owner is later dropped, the pg_class
entry becomes owned by a non-existant user which is bogus.
To fix, create a new routine AlterTypeOwner_oid which knows whether to
pass the request to ATExecChangeOwner or deal with it directly, and use
that in shdepReassignOwner rather than calling AlterTypeOwnerInternal
directly. AlterTypeOwnerInternal is now simpler in that it only
modifies the pg_type entry and recurses to handle a possible array type;
higher-level tasks are handled by either AlterTypeOwner directly or
AlterTypeOwner_oid.
I took the opportunity to add a few more objects to the test rig for
REASSIGN OWNED, so that more cases are exercised. Additional ones could
be added for superuser-only-ownable objects (such as FDWs and event
triggers) but I didn't want to push my luck by adding a new superuser to
the tests on a backpatchable bug fix.
Per bug #13666 reported by Chris Pacejo.
Backpatch to 9.5.
(I would back-patch this all the way back, except that it doesn't apply
cleanly in 9.4 and earlier because 59367fdf9 wasn't backpatched. If we
decide that we need this in earlier branches too, we should backpatch
both.)
FOREIGN KEY constraints have behaved this way for a long time, but for
some reason the behavior of CHECK constraints has been inconsistent up
until now.
Amit Langote and Amul Sul, with assorted tweaks by me.
We carry around information about if a given query has row security or
not to allow the plancache to use that information to invalidate a
planned query in the event that the environment changes.
Previously, the flag of one of the subqueries was simply being copied
into place to indicate if the query overall included RLS components.
That's wrong as we need the global OR of all subqueries. Fix by
changing the code to match how fireRIRules works, which is results
in OR'ing all of the flags.
Noted by Tom.
Back-patch to 9.5 where RLS was introduced.
This one test was behaving differently between the ubuntu fix for
CVE-2015-7499 and the base "expected" file. It's not worth having
yet another version of the expected file for this test, so drop it.
Perhaps at some point when all distros have settled down to the
same behavior on this test, it can be restored.
Problem found by me on libxml2 (2.9.1+dfsg1-3ubuntu4.6).
Solution suggested by Tom Lane.
Backpatch to 9.5, where the test was added.
Recent releases of libxml2 do not provide error context reports for errors
detected at the very end of the input string. This appears to be a bug, or
at least an infelicity, introduced by the fix for libxml2's CVE-2015-7499.
We can hope that this behavioral change will get undone before too long;
but the security patch is likely to spread a lot faster/further than any
follow-on cleanup, which means this behavior is likely to be present in the
wild for some time to come. As a stopgap, add a variant regression test
expected-file that matches what you get with a libxml2 that acts this way.
As reported in bug #13809 by Alexander Ashurkov, the code for REASSIGN
OWNED hadn't gotten word about user mappings. Deal with them in the
same way default ACLs do, which is to ignore them altogether; they are
handled just fine by DROP OWNED. The other foreign object cases are
already handled correctly by both commands.
Also add a REASSIGN OWNED statement to foreign_data test to exercise the
foreign data objects. (The changes are just before the "cleanup" phase,
so it shouldn't remove any existing live test.)
Reported by Alexander Ashurkov, then independently by Jaime Casanova.
DROP OWNED BY handled GRANT-based ACLs but was not removing roles from
policies. Fix that by having DROP OWNED BY remove the role specified
from the list of roles the policy (or policies) apply to, or the entire
policy (or policies) if it only applied to the role specified.
As with ACLs, the DROP OWNED BY caller must have permission to modify
the policy or a WARNING is thrown and no change is made to the policy.
ALTER POLICY hadn't fully considered partial policy alternation
(eg: change just the roles on the policy, or just change one of
the expressions) when rebuilding the dependencies. Instead, it
would happily remove all dependencies which existed for the
policy and then only recreate the dependencies for the objects
referred to in the specific ALTER POLICY command.
Correct that by extracting and building the dependencies for all
objects referenced by the policy, regardless of if they were
provided as part of the ALTER POLICY command or were already in
place as part of the pre-existing policy.
More fuzz testing by Andreas Seltenreich exposed that the planner did not
cope well with chains of lateral references. If relation X references Y
laterally, and Y references Z laterally, then we will have to scan X on the
inside of a nestloop with Z, so for all intents and purposes X is laterally
dependent on Z too. The planner did not understand this and would generate
intermediate joins that could not be used. While that was usually harmless
except for wasting some planning cycles, under the right circumstances it
would lead to "failed to build any N-way joins" or "could not devise a
query plan" planner failures.
To fix that, convert the existing per-relation lateral_relids and
lateral_referencers relid sets into their transitive closures; that is,
they now show all relations on which a rel is directly or indirectly
laterally dependent. This not only fixes the chained-reference problem
but allows some of the relevant tests to be made substantially simpler
and faster, since they can be reduced to simple bitmap manipulations
instead of searches of the LateralJoinInfo list.
Also, when a PlaceHolderVar that is due to be evaluated at a join contains
lateral references, we should treat those references as indirect lateral
dependencies of each of the join's base relations. This prevents us from
trying to join any individual base relations to the lateral reference
source before the join is formed, which again cannot work.
Andreas' testing also exposed another oversight in the "dangerous
PlaceHolderVar" test added in commit 85e5e222b1. Simply rejecting
unsafe join paths in joinpath.c is insufficient, because in some cases
we will end up rejecting *all* possible paths for a particular join, again
leading to "could not devise a query plan" failures. The restriction has
to be known also to join_is_legal and its cohort functions, so that they
will not select a join for which that will happen. I chose to move the
supporting logic into joinrels.c where the latter functions are.
Back-patch to 9.3 where LATERAL support was introduced.
ExecOnConflictUpdate() passed t_ctid of the to-be-updated tuple to
ExecUpdate(). That's problematic primarily because of two reason: First
and foremost t_ctid could point to a different tuple. Secondly, and
that's what triggered the complaint by Stanislav, t_ctid is changed by
heap_update() to point to the new tuple version. The behavior of AFTER
UPDATE triggers was therefore broken, with NEW.* and OLD.* tuples
spuriously identical within AFTER UPDATE triggers.
To fix both issues, pass a pointer to t_self of a on-stack HeapTuple
instead.
Fixing this bug lead to one change in regression tests, which previously
failed due to the first issue mentioned above. There's a reasonable
expectation that test fails, as it updates one row repeatedly within one
INSERT ... ON CONFLICT statement. That is only possible if the second
update is triggered via ON CONFLICT ... SET, ON CONFLICT ... WHERE, or
by a WITH CHECK expression, as those are executed after
ExecOnConflictUpdate() does a visibility check. That could easily be
prohibited, but given it's allowed for plain UPDATEs and a rare corner
case, it doesn't seem worthwhile.
Reported-By: Stanislav Grozev
Author: Andres Freund and Peter Geoghegan
Discussion: CAA78GVqy1+LisN-8DygekD_Ldfy=BJLarSpjGhytOsgkpMavfQ@mail.gmail.com
Backpatch: 9.5, where ON CONFLICT was introduced
For unclear reasons, this function doesn't always read the expected data
in some old Perl versions. Rewriting it to avoid use of ARGV seems to
dodge the problem, and this version is clearer anyway if you ask me.
In passing, also improve error message in adjacent append_to_file function.
To support this, we must reconcile some historical anomalies in the
behavior of -c. In particular, as a backward-incompatibility, -c no
longer implies --no-psqlrc.
Pavel Stehule (code) and Catalin Iacob (documentation). Review by
Michael Paquier and myself. Proposed behavior per Tom Lane.
It was possible for the planner to decide to join a LATERAL subquery to
the outer side of an outer join before the outer join itself is completed.
Normally that's fine because of the associativity rules, but it doesn't
work if the subquery contains a lateral reference to the inner side of the
outer join. In such a situation the outer join *must* be done first.
join_is_legal() missed this consideration and would allow the join to be
attempted, but the actual path-building code correctly decided that no
valid join path could be made, sometimes leading to planner errors such as
"failed to build any N-way joins".
Per report from Andreas Seltenreich. Back-patch to 9.3 where LATERAL
support was added.
Noted by Tom Lane:
- PostgresNode had a BEGIN block which created files, contrary to
perlmod suggestions to do that only on INIT blocks.
- Assign ports randomly rather than starting from 90600.
Noted by Noah Misch:
- Change use of no-longer-set PGPORT environment variable to $node->port
- Don't start a server in pg_controldata test
- PostgresNode was reading the PID file incorrectly; test the right
thing, and chomp the line we read from the PID file.
- Remove an unused $devnull variable
- Use 'pg_ctl kill' instead of "kill" directly, for Windos portability.
- Make server log names more informative.
Author: Michael Paquier
This way, existing .gitignore entries and makefile clean actions will
automatically apply to the tempdir, should it survive a TAP test run
(which can happen if the user control-C's out of the run, for example).
Michael Paquier, per a complaint from me
The original code was a bit clunky; make it more amenable for further
reuse by creating a new Perl package PostgresNode, which is an
object-oriented representation of a single server, with some support
routines such as init, start, stop, psql. This serves as a better basis
on which to build further test code, and enables writing tests that use
more than one server without too much complication.
This commit modifies a lot of the existing test files, mostly to remove
explicit calls to system commands (pg_ctl) replacing them with method
calls of a PostgresNode object. The result is quite a bit more
straightforward.
Also move some initialization code to BEGIN and INIT blocks instead of
having it straight in as top-level code.
This commit also introduces package RecursiveCopy so that we can copy
whole directories without having to depend on packages that may not be
present on vanilla Perl 5.8 installations.
I also ran perltidy on the modified files, which changes some code sites
that are not otherwise touched by this patch. I tried to avoid this,
but it ended up being more trouble than it's worth.
Authors: Michael Paquier, Álvaro Herrera
Review: Noah Misch
Don't force the data width to extend all the way to the right margin if it
doesn't need to. This reverts the behavior in non-wrapping cases to be
what it was in 9.4. Also, make the logic that ensures the data line width
is at least equal to the record-header line width a little less obscure.
In passing, avoid possible calculation of log10(0). Probably that's
harmless, given the lack of field complaints, but it seems risky:
conversion of NaN to an integer isn't well defined.
This area was rather heavily whacked around in 6513633b9 and follow-on
commits, and it was showing it, because the logic to calculate the
allowable data width in wrapped expanded mode had only the vaguest
relationship to the logic that was actually printing the data. It was
not very close to being right about the conditions requiring overhead
columns to be added. Aside from being wrong, it was pretty unreadable
and under-commented. Rewrite it so it corresponds to what the printing
code actually does.
In passing, remove a couple of dead tests in the printing logic, too.
Per a complaint from Jeff Janes, though this doesn't look much like his
patch because it fixes a number of other corner-case bogosities too.
One such fix that's visible in the regression test results is that
although the code was attempting to enforce a minimum data width of
3 columns, it sometimes left less space than that available.
In commit 8abb3cda0d I attempted to cache
the expression state trees constructed for domain CHECK constraints for
the life of the backend (assuming the domain's constraints don't get
redefined). However, this turns out not to work very well, because
execQual.c will run those state trees with ecxt_per_query_memory pointing
to a query-lifespan context, and in some situations we'll end up with
pointers into that context getting stored into the state trees. This
happens in particular with SQL-language functions, as reported by
Emre Hasegeli, but there are many other cases.
To fix, keep only the expression plan trees for domain CHECK constraints
in the typcache's data structure, and revert to performing ExecInitExpr
(at least) once per query to set up expression state trees in the query's
context.
Eventually it'd be nice to undo this, but that will require some careful
thought about memory management for expression state trees, and it seems
far too late for any such redesign in 9.5. This way is still much more
efficient than what happened before 8abb3cda0.
The previous way of reconstructing check constraints was to do a separate
"ALTER TABLE ONLY tab ADD CONSTRAINT" for each table in an inheritance
hierarchy. However, that way has no hope of reconstructing the check
constraints' own inheritance properties correctly, as pointed out in
bug #13779 from Jan Dirk Zijlstra. What we should do instead is to do
a regular "ALTER TABLE", allowing recursion, at the topmost table that
has a particular constraint, and then suppress the work queue entries
for inherited instances of the constraint.
Annoyingly, we'd tried to fix this behavior before, in commit 5ed6546cf,
but we failed to notice that it wasn't reconstructing the pg_constraint
field values correctly.
As long as I'm touching pg_get_constraintdef_worker anyway, tweak it to
always schema-qualify the target table name; this seems like useful backup
to the protections installed by commit 5f173040.
In HEAD/9.5, get rid of get_constraint_relation_oids, which is now unused.
(I could alternatively have modified it to also return conislocal, but that
seemed like a pretty single-purpose API, so let's not pretend it has some
other use.) It's unused in the back branches as well, but I left it in
place just in case some third-party code has decided to use it.
In HEAD/9.5, also rename pg_get_constraintdef_string to
pg_get_constraintdef_command, as the previous name did nothing to explain
what that entry point did differently from others (and its comment was
equally useless). Again, that change doesn't seem like material for
back-patching.
I did a bit of re-pgindenting in tablecmds.c in HEAD/9.5, as well.
Otherwise, back-patch to all supported branches.
