This extends the logical decoding to also decode sequence increments.
We differentiate between sequences created in the current (in-progress)
transaction, and sequences created earlier. This mixed behavior is
necessary because while sequences are not transactional (increments are
not subject to ROLLBACK), relfilenode changes are. So we do this:
* Changes for sequences created in the same top-level transaction are
treated as transactional, i.e. just like any other change from that
transaction, and discarded in case of a rollback.
* Changes for sequences created earlier are applied immediately, as if
performed outside any transaction. This applies also after ALTER
SEQUENCE, which may create a new relfilenode.
Moreover, if we ever get support for DDL replication, the sequence
won't exist until the transaction gets applied.
Sequences created in the current transaction are tracked in a simple
hash table, identified by a relfilenode. That means a sequence may
already exist, but if a transaction does ALTER SEQUENCE then the
increments for the new relfilenode will be treated as transactional.
For each relfilenode we track the XID of (sub)transaction that created
it, which is needed for cleanup at transaction end. We don't need to
check the XID to decide if an increment is transactional - if we find a
match in the hash table, it has to be the same transaction.
This requires two minor changes to WAL-logging. Firstly, we need to
ensure the sequence record has a valid XID - until now the the increment
might have XID 0 if it was the first change in a subxact. But the
sequence might have been created in the same top-level transaction. So
we ensure the XID is assigned when WAL-logging increments.
The other change is addition of "created" flag, marking increments for
newly created relfilenodes. This makes it easier to maintain the hash
table of sequences that need transactional handling.
Note: This is needed because of subxacts. A XID 0 might still have the
sequence created in a different subxact of the same top-level xact.
This does not include any changes to test_decoding and/or the built-in
replication - those will be committed in separate patches.
A patch adding decoding of sequences was originally submitted by Cary
Huang. This commit reworks various important aspects (e.g. the WAL
logging and transactional/non-transactional handling). However, the
original patch and reviews were very useful.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Hannu Krosing, Andres Freund
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
Deduplication reduces the storage overhead of duplicates in indexes that
use the standard nbtree index access method. The deduplication process
is applied lazily, after the point where opportunistic deletion of
LP_DEAD-marked index tuples occurs. Deduplication is only applied at
the point where a leaf page split would otherwise be required. New
posting list tuples are formed by merging together existing duplicate
tuples. The physical representation of the items on an nbtree leaf page
is made more space efficient by deduplication, but the logical contents
of the page are not changed. Even unique indexes make use of
deduplication as a way of controlling bloat from duplicates whose TIDs
point to different versions of the same logical table row.
The lazy approach taken by nbtree has significant advantages over a GIN
style eager approach. Most individual inserts of index tuples have
exactly the same overhead as before. The extra overhead of
deduplication is amortized across insertions, just like the overhead of
page splits. The key space of indexes works in the same way as it has
since commit dd299df8 (the commit that made heap TID a tiebreaker
column).
Testing has shown that nbtree deduplication can generally make indexes
with about 10 or 15 tuples for each distinct key value about 2.5X - 4X
smaller, even with single column integer indexes (e.g., an index on a
referencing column that accompanies a foreign key). The final size of
single column nbtree indexes comes close to the final size of a similar
contrib/btree_gin index, at least in cases where GIN's posting list
compression isn't very effective. This can significantly improve
transaction throughput, and significantly reduce the cost of vacuuming
indexes.
A new index storage parameter (deduplicate_items) controls the use of
deduplication. The default setting is 'on', so all new B-Tree indexes
automatically use deduplication where possible. This decision will be
reviewed at the end of the Postgres 13 beta period.
There is a regression of approximately 2% of transaction throughput with
synthetic workloads that consist of append-only inserts into a table
with several non-unique indexes, where all indexes have few or no
repeated values. The underlying issue is that cycles are wasted on
unsuccessful attempts at deduplicating items in non-unique indexes.
There doesn't seem to be a way around it short of disabling
deduplication entirely. Note that deduplication of items in unique
indexes is fairly well targeted in general, which avoids the problem
there (we can use a special heuristic to trigger deduplication passes in
unique indexes, since we're specifically targeting "version bloat").
Bump XLOG_PAGE_MAGIC because xl_btree_vacuum changed.
No bump in BTREE_VERSION, since the representation of posting list
tuples works in a way that's backwards compatible with version 4 indexes
(i.e. indexes built on PostgreSQL 12). However, users must still
REINDEX a pg_upgrade'd index to use deduplication, regardless of the
Postgres version they've upgraded from. This is the only way to set the
new nbtree metapage flag indicating that deduplication is generally
safe.
Author: Anastasia Lubennikova, Peter Geoghegan
Reviewed-By: Peter Geoghegan, Heikki Linnakangas
Discussion:
https://postgr.es/m/55E4051B.7020209@postgrespro.ruhttps://postgr.es/m/4ab6e2db-bcee-f4cf-0916-3a06e6ccbb55@postgrespro.ru
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
API and mechanism to allow generic messages to be inserted into WAL that are
intended to be read by logical decoding plugins. This commit adds an optional
new callback to the logical decoding API.
Messages are either text or bytea. Messages can be transactional, or not, and
are identified by a prefix to allow multiple concurrent decoding plugins.
(Not to be confused with Generic WAL records, which are intended to allow crash
recovery of extensible objects.)
Author: Petr Jelinek and Andres Freund
Reviewers: Artur Zakirov, Tomas Vondra, Simon Riggs
Discussion: 5685F999.6010202@2ndquadrant.com
This interface is designed to give an access to WAL for extensions which
could implement new access method, for example. Previously it was
impossible because restoring from custom WAL would need to access system
catalog to find a redo custom function. This patch suggests generic way
to describe changes on page with standart layout.
Bump XLOG_PAGE_MAGIC because of new record type.
Author: Alexander Korotkov with a help of Petr Jelinek, Markus Nullmeier and
minor editorization by my
Reviewers: Petr Jelinek, Alvaro Herrera, Teodor Sigaev, Jim Nasby,
Michael Paquier
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
When implementing a replication solution ontop of logical decoding, two
related problems exist:
* How to safely keep track of replication progress
* How to change replication behavior, based on the origin of a row;
e.g. to avoid loops in bi-directional replication setups
The solution to these problems, as implemented here, consist out of
three parts:
1) 'replication origins', which identify nodes in a replication setup.
2) 'replication progress tracking', which remembers, for each
replication origin, how far replay has progressed in a efficient and
crash safe manner.
3) The ability to filter out changes performed on the behest of a
replication origin during logical decoding; this allows complex
replication topologies. E.g. by filtering all replayed changes out.
Most of this could also be implemented in "userspace", e.g. by inserting
additional rows contain origin information, but that ends up being much
less efficient and more complicated. We don't want to require various
replication solutions to reimplement logic for this independently. The
infrastructure is intended to be generic enough to be reusable.
This infrastructure also replaces the 'nodeid' infrastructure of commit
timestamps. It is intended to provide all the former capabilities,
except that there's only 2^16 different origins; but now they integrate
with logical decoding. Additionally more functionality is accessible via
SQL. Since the commit timestamp infrastructure has also been introduced
in 9.5 (commit 73c986add) changing the API is not a problem.
For now the number of origins for which the replication progress can be
tracked simultaneously is determined by the max_replication_slots
GUC. That GUC is not a perfect match to configure this, but there
doesn't seem to be sufficient reason to introduce a separate new one.
Bumps both catversion and wal page magic.
Author: Andres Freund, with contributions from Petr Jelinek and Craig Ringer
Reviewed-By: Heikki Linnakangas, Petr Jelinek, Robert Haas, Steve Singer
Discussion: 20150216002155.GI15326@awork2.anarazel.de,
20140923182422.GA15776@alap3.anarazel.de,
20131114172632.GE7522@alap2.anarazel.de
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
BRIN is a new index access method intended to accelerate scans of very
large tables, without the maintenance overhead of btrees or other
traditional indexes. They work by maintaining "summary" data about
block ranges. Bitmap index scans work by reading each summary tuple and
comparing them with the query quals; all pages in the range are returned
in a lossy TID bitmap if the quals are consistent with the values in the
summary tuple, otherwise not. Normal index scans are not supported
because these indexes do not store TIDs.
As new tuples are added into the index, the summary information is
updated (if the block range in which the tuple is added is already
summarized) or not; in the latter case, a subsequent pass of VACUUM or
the brin_summarize_new_values() function will create the summary
information.
For data types with natural 1-D sort orders, the summary info consists
of the maximum and the minimum values of each indexed column within each
page range. This type of operator class we call "Minmax", and we
supply a bunch of them for most data types with B-tree opclasses.
Since the BRIN code is generalized, other approaches are possible for
things such as arrays, geometric types, ranges, etc; even for things
such as enum types we could do something different than minmax with
better results. In this commit I only include minmax.
Catalog version bumped due to new builtin catalog entries.
There's more that could be done here, but this is a good step forwards.
Loosely based on ideas from Simon Riggs; code mostly by Álvaro Herrera,
with contribution by Heikki Linnakangas.
Patch reviewed by: Amit Kapila, Heikki Linnakangas, Robert Haas.
Testing help from Jeff Janes, Erik Rijkers, Emanuel Calvo.
PS:
The research leading to these results has received funding from the
European Union's Seventh Framework Programme (FP7/2007-2013) under
grant agreement n° 318633.
This is primarily useful for the upcoming pg_xlogdump --stats feature,
but also allows to remove some duplicated code in the rmgr_desc
routines.
Due to the separation and harmonization, the output of dipsplayed
records changes somewhat. But since this isn't enduser oriented
content that's ok.
It's potentially desirable to further change pg_xlogdump's display of
records. It previously wasn't possible to show the record type
separately from the description forcing it to be in the last
column. But that's better done in a separate commit.
Author: Abhijit Menon-Sen, slightly editorialized by me
Reviewed-By: Álvaro Herrera, Andres Freund, and Heikki Linnakangas
Discussion: 20140604104716.GA3989@toroid.org
It is no longer used, none of the resource managers have multi-record
actions that would make it unsafe to perform a restartpoint.
Also don't allow rm_cleanup to write WAL records, it's also no longer
required. Move the call to rm_cleanup routines to make it more symmetric
with rm_startup.
Splitting a page consists of two separate steps: splitting the child page,
and inserting the downlink for the new right page to the parent. Previously,
we handled the case that you crash in between those steps with a cleanup
routine after the WAL recovery had finished, which finished the incomplete
split. However, that doesn't help if the page split is interrupted but the
database doesn't crash, so that you don't perform WAL recovery. That could
happen for example if you run out of disk space.
Remove the end-of-recovery cleanup step. Instead, when a page is split, the
left page is marked with a new INCOMPLETE_SPLIT flag, and when the downlink
is inserted to the parent, the flag is cleared again. If an insertion sees
a page with the flag set, it knows that the split was interrupted for some
reason, and inserts the missing downlink before proceeding.
I used the same approach to fix GIN and GiST split algorithms earlier. This
was the last WAL cleanup routine, so we could get rid of that whole
machinery now, but I'll leave that for a separate patch.
Reviewed by Peter Geoghegan.
Replace it with an approach similar to what GiST uses: when a page is split,
the left sibling is marked with a flag indicating that the parent hasn't been
updated yet. When the parent is updated, the flag is cleared. If an insertion
steps on a page with the flag set, it will finish split before proceeding
with the insertion.
The post-recovery cleanup mechanism was never totally reliable, as insertion
to the parent could fail e.g because of running out of memory or disk space,
leaving the tree in an inconsistent state.
This also divides the responsibility of WAL-logging more clearly between
the generic ginbtree.c code, and the parts specific to entry and posting
trees. There is now a common WAL record format for insertions and deletions,
which is written by ginbtree.c, followed by tree-specific payload, which is
returned by the placetopage- and split- callbacks.
The new rmgrlist.h header, containing all necessary data
about built-in resource managers, allows other pieces of code to
access them.
In particular, this allows a future pg_xlogdump program to extract
rm_desc function pointers, without having to keep a duplicate list of
them.
Tomas Vondra
Jeff Davis
Bruce Momjian
Peter Geoghegan
Robert Haas
Simon Riggs
Teodor Sigaev
Heikki Linnakangas
Andres Freund
Alvaro Herrera