The point of this patch is to reduce inclusion spam by not needing
to #include <netdb.h> or <pwd.h> in port.h (which is read by every
compile in our tree). To do that, we must remove port.h's
declarations of pqGetpwuid and pqGethostbyname.
pqGethostbyname is only used, and is only ever likely to be used,
in src/port/getaddrinfo.c --- which isn't even built on most
platforms, making pqGethostbyname dead code for most people.
Hence, deal with that by just moving it into getaddrinfo.c.
To clean up pqGetpwuid, invent a couple of simple wrapper
functions with less-messy APIs. This allows removing some
duplicate error-handling code, too.
In passing, remove thread.c from the MSVC build, since it
contains nothing we use on Windows.
Noted while working on 376ce3e40.
Discussion: https://postgr.es/m/1634252654444.90107@mit.edu
Try to disable ASLR when building in EXEC_BACKEND mode, to avoid random
memory mapping failures while testing. For developer use only, no
effect on regular builds.
Suggested-by: Andres Freund <andres@anarazel.de>
Tested-by: Bossart, Nathan <bossartn@amazon.com>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
1. Update our open() wrapper to check for NT's STATUS_DELETE_PENDING
and translate it to Unix-like errors. This is done with
RtlGetLastNtStatus(), which is dynamically loaded from ntdll. A new
file win32ntdll.c centralizes lookup of NT functions, in case we decide
to add more in the future.
2. Remove non-working code that was trying to do something similar for
stat(), and just reuse the open() wrapper code. As a side effect,
stat() also gains resilience against "sharing violation" errors.
3. Since stat() is used very early in process startup, remove the
requirement that the Win32 signal event has been created before
pgwin32_open_handle() is reached. Instead, teach pg_usleep() to fall
back to a non-interruptible sleep if reached before the signal event is
available.
This could be back-patched, but for now it's in master only. The
problem has apparently been with us for a long time and generated only a
few complaints. Proposed patches trigger it more often, which led to
this investigation and fix.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJz_pZTF9mckn6XgSv69%2BjGwdgLkxZ6b3NWGLBCVjqUZA%40mail.gmail.com
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
It's a coin toss which of these is a better default assumption.
However, of the machines we have in the buildfarm, the only ones
relying on the fallback socklen_t definition are ancient HPUX,
and on that platform unsigned int is the right choice. Minor
tweak to ee3a1a5b6.
Discussion: https://postgr.es/m/1440792.1636558888@sss.pgh.pa.us
This check was used to accommodate a staggering variety in particular
in the type of the third argument of accept(). This is no longer of
concern on currently supported systems. We can just use socklen_t in
the code and put in a simple check that substitutes int for socklen_t
if it's missing, to cover the few stragglers.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/3538f4c4-1886-64f2-dcff-aaad8267fb82@enterprisedb.com
Add ETIMEDOUT to ALL_CONNECTION_FAILURE_ERRNOS' list of "errnos that
identify hard failure of a previously-established network connection".
While one could imagine that this is sometimes recoverable, the same
could be said of other entries such as ENETDOWN.
In support of this, handle ETIMEDOUT on par with other socket errors
in relevant infrastructure, such as TranslateSocketError().
(I made a couple of cosmetic adjustments in TranslateSocketError(),
too.) The code now assumes that ETIMEDOUT is defined everywhere,
which it should be given that POSIX has required it since SUSv2.
Perhaps this should be back-patched, but I'm hesitant to do so given
the lack of previous complaints, and the hazard that there's a small
ABI break on Windows from redefining the symbol. Even if we decide
to do that, it'd be prudent to let this bake awhile in HEAD first.
Jelte Fennema
Discussion: https://postgr.es/m/AM5PR83MB01782BFF2978505F6D6C559AF7AA9@AM5PR83MB0178.EURPRD83.prod.outlook.com
Until now the bsearch_arg function was used only in extended statistics
code, so it was defined in that code. But we already have qsort_arg in
src/port, so let's move it next to it.
This expands the binary validation in pg_upgrade with a version
check per binary to ensure that the target cluster installation
only contains binaries from the target version.
In order to reduce duplication, validate_exec is exported from
port.h and the local copy in pg_upgrade is removed.
Author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/9328.1552952117@sss.pgh.pa.us
Provide synchronous vectored file I/O routines. These map to preadv()
and pwritev(), with fallback implementations for systems that don't have
them. Also provide a wrapper pg_pwritev_with_retry() that automatically
retries on short writes.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGJA%2Bu-220VONeoREBXJ9P3S94Y7J%2BkqCnTYmahvZJwM%3Dg%40mail.gmail.com
Since at least 2001 we've used putenv() and avoided setenv(), on the
grounds that the latter was unportable and not in POSIX. However,
POSIX added it that same year, and by now the situation has reversed:
setenv() is probably more portable than putenv(), since POSIX now
treats the latter as not being a core function. And setenv() has
cleaner semantics too. So, let's reverse that old policy.
This commit adds a simple src/port/ implementation of setenv() for
any stragglers (we have one in the buildfarm, but I'd not be surprised
if that code is never used in the field). More importantly, extend
win32env.c to also support setenv(). Then, replace usages of putenv()
with setenv(), and get rid of some ad-hoc implementations of setenv()
wannabees.
Also, adjust our src/port/ implementation of unsetenv() to follow the
POSIX spec that it returns an error indicator, rather than returning
void as per the ancient BSD convention. I don't feel a need to make
all the call sites check for errors, but the portability stub ought
to match real-world practice.
Discussion: https://postgr.es/m/2065122.1609212051@sss.pgh.pa.us
Currently only OpenSSL requires this initialization, but in the future
other SSL implementations are likely to need it as well. Abstracting
this functionality out into a separate function makes this cleaner and
more clear, and also removes the dependency on OpenSSL headers from
fork_process.c.
OpenSSL is special in that we need to initialize this random number
generator even if we're not going to use it directly, until we drop
support for everything prior to OpenSSL 1.1.1. (And of course also if we
actually use it). All other implementations are left empty at this time,
but more are expected to be added in the future.
Author: Daniel Gustafsson <daniel@yesql.se>, Michael Paquier <michael@paquier.xyz>
Reviewed-By: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/F6291C3C-747C-4C93-BCE0-28BB420B1FF5@yesql.se
Up to now, only ECONNRESET (and EPIPE, in most but not quite all places)
received special treatment in our error handling logic. This patch
changes things so that related error codes such as ECONNABORTED are
also recognized as indicating that the connection's dead and unlikely
to come back.
We continue to think, however, that only ECONNRESET and EPIPE should be
reported as probable server crashes; the other cases indicate network
connectivity problems but prove little about the server's state. Thus,
there's no change in the error message texts that are output for such
cases. The key practical effect is that errcode_for_socket_access()
will report ERRCODE_CONNECTION_FAILURE rather than
ERRCODE_INTERNAL_ERROR for a network failure. It's expected that this
will fix buildfarm member lorikeet's failures since commit 32a9c0bdf,
as that seems to be due to not treating ECONNABORTED equivalently to
ECONNRESET.
The set of errnos treated this way now includes ECONNABORTED, EHOSTDOWN,
EHOSTUNREACH, ENETDOWN, ENETRESET, and ENETUNREACH. Several of these
were second-class citizens in terms of their handling in places like
get_errno_symbol(), so upgrade the infrastructure where necessary.
As committed, this patch assumes that all these symbols are defined
everywhere. POSIX specifies all of them except EHOSTDOWN, but that
seems to exist on all platforms of interest; we'll see what the
buildfarm says about that.
Probably this should be back-patched, but let's see what the buildfarm
thinks of it first.
Fujii Masao and Tom Lane
Discussion: https://postgr.es/m/2621622.1602184554@sss.pgh.pa.us
This patch started out with the goal of harmonizing various arbitrary
limits on password length, but after awhile a better idea emerged:
let's just get rid of those fixed limits.
recv_password_packet() has an arbitrary limit on the packet size,
which we don't really need, so just drop it. (Note that this doesn't
really affect anything for MD5 or SCRAM password verification, since
those will hash the user's password to something shorter anyway.
It does matter for auth methods that require a cleartext password.)
Likewise remove the arbitrary error condition in pg_saslprep().
The remaining limits are mostly in client-side code that prompts
for passwords. To improve those, refactor simple_prompt() so that
it allocates its own result buffer that can be made as big as
necessary. Actually, it proves best to make a separate routine
pg_get_line() that has essentially the semantics of fgets(), except
that it allocates a suitable result buffer and hence will never
return a truncated line. (pg_get_line has a lot of potential
applications to replace randomly-sized fgets buffers elsewhere,
but I'll leave that for another patch.)
I built pg_get_line() atop stringinfo.c, which requires moving
that code to src/common/; but that seems fine since it was a poor
fit for src/port/ anyway.
This patch is mostly mine, but it owes a good deal to Nathan Bossart
who pressed for a solution to the password length problem and
created a predecessor patch. Also thanks to Peter Eisentraut and
Stephen Frost for ideas and discussion.
Discussion: https://postgr.es/m/09512C4F-8CB9-4021-B455-EF4C4F0D55A0@amazon.com
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
pg_rewind needs to copy from the source cluster to the target cluster a
set of relation blocks changed from the previous checkpoint where WAL
forked up to the end of WAL on the target. Building this list of
relation blocks requires a range of WAL segments that may not be present
anymore on the target's pg_wal, causing pg_rewind to fail. It is
possible to work around this issue by copying manually the WAL segments
needed but this may lead to some extra and actually useless work.
This commit introduces a new option allowing pg_rewind to use a
restore_command while doing the rewind by grabbing the parameter value
of restore_command from the target cluster configuration. This allows
the rewind operation to be more reliable, so as only the WAL segments
needed by the rewind are restored from the archives.
In order to be able to do that, a new routine is added to src/common/ to
allow frontend tools to restore files from archives using an
already-built restore command. This version is more simple than the
backend equivalent as there is no need to handle the non-recovery case.
Author: Alexey Kondratov
Reviewed-by: Andrey Borodin, Andres Freund, Alvaro Herrera, Alexander
Korotkov, Michael Paquier
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
Windows has this since _MSC_VER >= 1200, and so do all other live
platforms according to the buildfarm, so remove the configure probe
and src/port/ substitution.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
This also lets us get rid of some configure probes that existed only
to support src/port/isinf.c. I kept the port.h hack to force using
__builtin_isinf() on clang, though.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Windows has this, and so do all other live platforms according to the
buildfarm, so remove the configure probe and src/port/ substitution.
Keep the probe that detects whether _LARGEFILE_SOURCE has to be
defined to get that, though ... that seems to be still relevant in
some places.
This is part of a series of commits to get rid of no-longer-relevant
configure checks and dead src/port/ code. I'm committing them separately
to make it easier to back out individual changes if they prove less
portable than I expect.
Discussion: https://postgr.es/m/15379.1582221614@sss.pgh.pa.us
Commit f14413b684 broke the build of
Perl-using modules on Windows.
Perl might have its own definitions of uid_t and gid_t, so we hide
ours, but then we can't use ours in our header files such as port.h
which don't see the Perl definition.
Hide our definition of getpeereid() on Windows in Perl-using modules,
using PLPERL_HAVE_UID_GID define. That means we can't portably use
getpeeruid() is such modules right now, but there is no need anyway.
The getpeereid() uses have so far been protected by HAVE_UNIX_SOCKETS,
so they didn't ever care about Windows support. But in anticipation
of Unix-domain socket support on Windows, that needs to be handled
differently.
Windows doesn't support getpeereid() at this time, so we use the
existing not-supported code path. We let configure do its usual thing
of picking up the replacement from libpgport, instead of the custom
overrides that it was doing before.
But then Windows doesn't have struct passwd, so this patch sprinkles
some additional #ifdef WIN32 around to make it work. This is similar
to existing code that deals with this issue.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/5974caea-1267-7708-40f2-6009a9d653b0@2ndquadrant.com
POSIX sigaction(2) can be told to block a set of signals while a
signal handler executes. Make use of that instead of manually
blocking and unblocking signals in the postmaster's signal handlers.
This should save a few cycles, and it also prevents recursive
invocation of signal handlers when many signals arrive in close
succession. We have seen buildfarm failures that seem to be due to
postmaster stack overflow caused by such recursion (exacerbated by
a Linux PPC64 kernel bug).
This doesn't change anything about the way that it works on Windows.
Somebody might consider adjusting port/win32/signal.c to let it work
similarly, but I'm not in a position to do that.
For the moment, just apply to HEAD. Possibly we should consider
back-patching this, but it'd be good to let it age awhile first.
Discussion: https://postgr.es/m/14878.1570820201@sss.pgh.pa.us
Use the explicit_bzero() function in places where it is important that
security information such as passwords is cleared from memory. There
might be other places where it could be useful; this is just an
initial collection.
For platforms that don't have explicit_bzero(), provide various
fallback implementations. (explicit_bzero() itself isn't standard,
but as Linux/glibc, FreeBSD, and OpenBSD have it, it's the most common
spelling, so it makes sense to make that the invocation point.)
Discussion: https://www.postgresql.org/message-id/flat/42d26bde-5d5b-c90d-87ae-6cab875f73be%402ndquadrant.com
Prefix inet_net_ntop and sibling routines with "pg_" to ensure that
they aren't mistaken for C-library functions. This fixes warnings
from cpluspluscheck on some platforms, and should help reduce reader
confusion everywhere, since our functions aren't exactly interchangeable
with the library versions (they may have different ideas about address
family codes).
This shouldn't be fixing any actual bugs, unless somebody's linker
is misbehaving, so no need to back-patch.
Discussion: https://postgr.es/m/20518.1559494394@sss.pgh.pa.us
Change the defaults for the pg_hba.conf generated by initdb to "peer"
for local (if supported, else "md5") and "md5" for host.
(Changing from "md5" to SCRAM is left as a separate exercise.)
"peer" is currently not supported on AIX, HP-UX, and Windows. Users
on those operating systems will now either have to provide a password
to initdb or choose a different authentication method when running
initdb.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/bec17f0a-ddb1-8b95-5e69-368d9d0a3390%40postgresql.org
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
Deal with silent-underflow errors in float4 for cygwin and mingw by
using our strtof() wrapper; deal with misrounding errors by adding
them to the resultmap. Some slight reorganization of declarations was
done to avoid duplicating material between cygwin.h and win32_port.h.
While here, remove from the resultmap all references to
float8-small-is-zero; inspection of cygwin output suggests it's no
longer required there, and the freebsd/netbsd/openbsd entries should
no longer be necessary (these date back to c. 2000). This commit
doesn't remove the file itself nor the documentation references for
it; that will happen in a subsequent commit if all goes well.
Using strtod() creates a double-rounding problem; the input decimal
value is first rounded to the nearest double; rounding that to the
nearest float may then give an incorrect result.
An example is that 7.038531e-26 when input via strtod and then rounded
to float4 gives 0xAE43FEp-107 instead of the correct 0xAE43FDp-107.
Values output by earlier PG versions with extra_float_digits=3 should
all be read in with the same values as previously. However, values
supplied by other software using shortest representations could be
mis-read.
On platforms that lack a strtof() entirely, we fall back to the old
incorrect rounding behavior. (As strtof() is required by C99, such
platforms are considered of primarily historical interest.) On VS2013,
some workarounds are used to get correct error handling.
The regression tests now test for the correct input values, so
platforms that lack strtof() will need resultmap entries. An entry for
HP-UX 10 is included (more may be needed).
Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/871s5emitx.fsf@news-spur.riddles.org.uk
Discussion: https://postgr.es/m/87d0owlqpv.fsf@news-spur.riddles.org.uk
This removes a portion of infrastructure introduced by fe0a0b5 to allow
compilation of Postgres in environments where no strong random source is
available, meaning that there is no linking to OpenSSL and no
/dev/urandom (Windows having its own CryptoAPI). No systems shipped
this century lack /dev/urandom, and the buildfarm is actually not
testing this switch at all, so just remove it. This simplifies
particularly some backend code which included a fallback implementation
using shared memory, and removes a set of alternate regression output
files from pgcrypto.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181230063219.GG608@paquier.xyz
At least as far back as the 2008 spec, POSIX has defined strsignal(3)
for looking up descriptive strings for signal numbers. We hadn't gotten
the word though, and were still using the crufty old sys_siglist array,
which is in no standard even though most Unixen provide it.
Aside from not being formally standards-compliant, this was just plain
ugly because it involved #ifdef's at every place using the code.
To eliminate the #ifdef's, create a portability function pg_strsignal,
which wraps strsignal(3) if available and otherwise falls back to
sys_siglist[] if available. The set of Unixen with neither API is
probably empty these days, but on any platform with neither, you'll
just get "unrecognized signal". All extant callers print the numeric
signal number too, so no need to work harder than that.
Along the way, upgrade pg_basebackup's child-error-exit reporting
to match the rest of the system.
Discussion: https://postgr.es/m/25758.1544983503@sss.pgh.pa.us
Commit ffa4cbd62 added logic to detect SIGPIPE failure of a COPY child
process, but it only worked correctly if the SIGPIPE occurred in the
immediate child process. Depending on the shell in use and the
complexity of the shell command string, we might instead get back
an exit code of 128 + SIGPIPE, representing a shell error exit
reporting SIGPIPE in the child process.
We could just hack up ClosePipeToProgram() to add the extra case,
but it seems like this is a fairly general issue deserving a more
general and better-documented solution. I chose to add a couple
of functions in src/common/wait_error.c, which is a natural place
to know about wait-result encodings, that will test for either a
specific child-process signal type or any child-process signal failure.
Then, adjust other places that were doing ad-hoc tests of this type
to use the common functions.
In RestoreArchivedFile, this fixes a race condition affecting whether
the process will report an error or just silently proc_exit(1): before,
that depended on whether the intermediate shell got SIGTERM'd itself
or reported a child process failing on SIGTERM.
Like the previous patch, back-patch to v10; we could go further
but there seems no real need to.
Per report from Erik Rijkers.
Discussion: https://postgr.es/m/f3683f87ab1701bea5d86a7742b22432@xs4all.nl
Forward to POSIX pread() and pwrite(), or emulate them if unavailable.
The emulation is not perfect as the file position is changed, so
we'll put pg_ prefixes on the names to minimize the risk of confusion
in future patches that might inadvertently try to mix pread() and read()
on the same file descriptor.
Author: Thomas Munro
Reviewed-by: Tom Lane, Jesper Pedersen
Discussion: https://postgr.es/m/CAEepm=02rapCpPR3ZGF2vW=SBHSdFYO_bz_f-wwWJonmA3APgw@mail.gmail.com
A warning on a NetBSD box revealed to me that pg_waldump/compat.c
is using vprintf(), which snprintf.c did not provide coverage for.
This is not good if we want to have uniform *printf behavior, and
it's pretty silly to omit when it's a one-line function.
I also noted that snprintf.c has pg_vsprintf() but for some reason
it was not exposed to the outside world, creating another way in
which code might accidentally invoke the platform *printf family.
Let's just make sure that we replace all eight of the POSIX-standard
printf family.
Also, upgrade plperl.h and plpython.h to make sure that they do
their undefine/redefine rain dance for all eight, not some random
maybe-sufficient subset thereof.
Up to now, float4out/float8out handled NaN and Infinity cases explicitly,
and invoked psprintf only for ordinary float values. This was done because
platform implementations of snprintf produce varying representations of
these special cases. But now that we use snprintf.c always, it's better
to give it the responsibility to produce a uniform representation of
these cases, so that we have uniformity across the board not only in
float4out/float8out. Hence, move that work into fmtfloat().
Also, teach fmtfloat() to recognize IEEE minus zero and handle it
correctly. The previous coding worked only accidentally, and would
fail for e.g. "%+f" format (it'd print "+-0.00000"). Now that we're
using snprintf.c everywhere, it's not acceptable for it to do weird
things in corner cases. (This incidentally avoids a portability
problem we've seen on some really ancient platforms, that native
sprintf does the wrong thing with minus zero.)
Also, introduce a new entry point in snprintf.c to allow float[48]out
to bypass the work of interpreting a well-known format spec, as well
as bypassing the overhead of the psprintf layer. I modeled this API
loosely on strfromd(). In my testing, this brings float[48]out back
to approximately the same speed they had when using native snprintf,
fixing one of the main performance issues caused by using snprintf.c.
(There is some talk of more aggressive work to improve the speed of
floating-point output conversion, but these changes seem to provide
a better starting point for such work anyway.)
Getting rid of the previous ad-hoc hack for Infinity/NaN in fmtfloat()
allows removing <ctype.h> from snprintf.c's #includes. I also removed
a few other #includes that I think are historical, though the buildfarm
may expose that as wrong.
Discussion: https://postgr.es/m/13178.1538794717@sss.pgh.pa.us
We must define the macro "printf" with arguments, else it can mess
up format archetype attributes in builds where PG_PRINTF_ATTRIBUTE
is just "printf". Fortunately, that's easy to do now that we're
requiring C99; we can use __VA_ARGS__.
On the other hand, it's better not to use __VA_ARGS__ for the rest
of the *printf crew, so that one can take the addresses of those
functions without surprises.
I'd proposed doing this some time ago, but forgot to make it happen;
buildfarm failures subsequent to 96bf88d52 reminded me.
Discussion: https://postgr.es/m/22709.1535135640@sss.pgh.pa.us
Discussion: https://postgr.es/m/20180926190934.ea4xvzhkayuw7gkx@alap3.anarazel.de
We've spent an awful lot of effort over the years in coping with
platform-specific vagaries of the *printf family of functions. Let's just
forget all that mess and standardize on always using src/port/snprintf.c.
This gets rid of a lot of configure logic, and it will allow a saner
approach to dealing with %m (though actually changing that is left for
a follow-on patch).
Preliminary performance testing suggests that as it stands, snprintf.c is
faster than the native printf functions for some tasks on some platforms,
and slower for other cases. A pending patch will improve that, though
cases with floating-point conversions will doubtless remain slower unless
we want to put a *lot* of effort into that. Still, we've not observed
that *printf is really a performance bottleneck for most workloads, so
I doubt this matters much.
Patch by me, reviewed by Michael Paquier
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
This provides the features that used to exist in useful_strerror()
for users of strerror_r(), too. Also, standardize on the GNU convention
that strerror_r returns a char pointer that may not be NULL.
I notice that libpq's win32.c contains a variant version of strerror_r
that probably ought to be folded into strerror.c. But lacking a
Windows environment, I should leave that to somebody else.
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
elog.c has long had a private strerror wrapper that handles assorted
possible failures or deficiencies of the platform's strerror. On Windows,
it also knows how to translate Winsock error codes, which the native
strerror does not. Move all this code into src/port/strerror.c and
define strerror() as a macro that invokes it, so that both our frontend
and backend code will have all of this behavior.
I believe this constitutes an actual bug fix on Windows, since AFAICS
our frontend code did not report Winsock error codes properly before this.
However, the main point is to lay the groundwork for implementing %m
in src/port/snprintf.c: the behavior we want %m to have is this one,
not the native strerror's.
Note that this throws away the prior use of src/port/strerror.c,
which was to implement strerror() on platforms lacking it. That's
been dead code for nigh twenty years now, since strerror() was
already required by C89.
We should likewise cause strerror_r to use this behavior, but
I'll tackle that separately.
Patch by me, reviewed by Michael Paquier
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
PostgreSQL uses a custom wrapper for open() and fopen() which is
concurrent-safe, allowing multiple processes to open and work on the
same file. This has a couple of advantages:
- pg_test_fsync does not handle O_DSYNC correctly otherwise, leading to
false claims that disks are unsafe.
- TAP tests can run into race conditions when a postmaster and pg_ctl
open postmaster.pid, fixing some random failures in the buildfam.
pg_upgrade is one frontend tool using workarounds to bypass file locking
issues with the log files it generates, however the interactions with
pg_ctl are proving to be tedious to get rid of, so this is left for
later.
Author: Laurenz Albe
Reviewed-by: Michael Paquier, Kuntal Ghosh
Discussion: https://postgr.es/m/1527846213.2475.31.camel@cybertec.at
Discussion: https://postgr.es/m/16922.1520722108@sss.pgh.pa.us
Tom Lane
Thomas Munro
Bruce Momjian
Peter Eisentraut
Tomas Vondra
Magnus Hagander
Michael Paquier
Andrew Gierth
Heikki Linnakangas
Peter Eisentraut