Previously the pgstat <-> replication slots API was done with on the basis of
names. However, the upcoming move to storing stats in shared memory makes it
more convenient to use a integer as key.
Change the replication slot functions to take the slot rather than the slot
name, and expose ReplicationSlotIndex() to compute the index of an replication
slot. Special handling will be required for restarts, as the index is not
stable across restarts. For now pgstat internally still uses names.
Rename pgstat_report_replslot_{create,drop}() to
pgstat_{create,drop}_replslot() to match the functions for other kinds of
stats.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
The current logical replication behavior is to send every transaction to
subscriber even if the transaction is empty. This can happen because
transaction doesn't contain changes from the selected publications or all
the changes got filtered. It is a waste of CPU cycles and network
bandwidth to build/transmit these empty transactions.
This patch addresses the above problem by postponing the BEGIN message
until the first change is sent. While processing a COMMIT message, if
there was no other change for that transaction, do not send the COMMIT
message. This allows us to skip sending BEGIN/COMMIT messages for empty
transactions.
When skipping empty transactions in synchronous replication mode, we send
a keepalive message to avoid delaying such transactions.
Author: Ajin Cherian, Hou Zhijie, Euler Taveira
Reviewed-by: Peter Smith, Takamichi Osumi, Shi Yu, Masahiko Sawada, Greg Nancarrow, Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CAMkU=1yohp9-dv48FLoSPrMqYEyyS5ZWkaZGD41RJr10xiNo_Q@mail.gmail.com
This allows specifying an optional column list when adding a table to
logical replication. The column list may be specified after the table
name, enclosed in parentheses. Columns not included in this list are not
sent to the subscriber, allowing the schema on the subscriber to be a
subset of the publisher schema.
For UPDATE/DELETE publications, the column list needs to cover all
REPLICA IDENTITY columns. For INSERT publications, the column list is
arbitrary and may omit some REPLICA IDENTITY columns. Furthermore, if
the table uses REPLICA IDENTITY FULL, column list is not allowed.
The column list can contain only simple column references. Complex
expressions, function calls etc. are not allowed. This restriction could
be relaxed in the future.
During the initial table synchronization, only columns included in the
column list are copied to the subscriber. If the subscription has
several publications, containing the same table with different column
lists, columns specified in any of the lists will be copied.
This means all columns are replicated if the table has no column list
at all (which is treated as column list with all columns), or when of
the publications is defined as FOR ALL TABLES (possibly IN SCHEMA that
matches the schema of the table).
For partitioned tables, publish_via_partition_root determines whether
the column list for the root or the leaf relation will be used. If the
parameter is 'false' (the default), the list defined for the leaf
relation is used. Otherwise, the column list for the root partition
will be used.
Psql commands \dRp+ and \d <table-name> now display any column lists.
Author: Tomas Vondra, Alvaro Herrera, Rahila Syed
Reviewed-by: Peter Eisentraut, Alvaro Herrera, Vignesh C, Ibrar Ahmed,
Amit Kapila, Hou zj, Peter Smith, Wang wei, Tang, Shi yu
Discussion: https://postgr.es/m/CAH2L28vddB_NFdRVpuyRBJEBWjz4BSyTB=_ektNRH8NJ1jf95g@mail.gmail.com
This commit adds support for decoding of sequences to the built-in
replication (the infrastructure was added by commit 0da92dc530).
The syntax and behavior mostly mimics handling of tables, i.e. a
publication may be defined as FOR ALL SEQUENCES (replicating all
sequences in a database), FOR ALL SEQUENCES IN SCHEMA (replicating
all sequences in a particular schema) or individual sequences.
To publish sequence modifications, the publication has to include
'sequence' action. The protocol is extended with a new message,
describing sequence increments.
A new system view pg_publication_sequences lists all the sequences
added to a publication, both directly and indirectly. Various psql
commands (\d and \dRp) are improved to also display publications
including a given sequence, or sequences included in a publication.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Amit Kapila, Hannu Krosing, Andres
Freund, Petr Jelinek
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
There are more compression parameters that can be specified than just
an integer compression level, so rename the new COMPRESSION_LEVEL
option to COMPRESSION_DETAIL before it gets released. Introduce a
flexible syntax for that option to allow arbitrary options to be
specified without needing to adjust the main replication grammar,
and common code to parse it that is shared between the client and
the server.
This commit doesn't actually add any new compression parameters,
so the only user-visible change is that you can now type something
like pg_basebackup --compress gzip:level=5 instead of writing just
pg_basebackup --compress gzip:5. However, it should make it easy to
add new options. If for example gzip starts offering fries, we can
support pg_basebackup --compress gzip:level=5,fries=true for the
benefit of users who want fries with that.
Along the way, this fixes a few things in pg_basebackup so that the
pg_basebackup can be used with a server-side compression algorithm
that pg_basebackup itself does not understand. For example,
pg_basebackup --compress server-lz4 could still succeed even if
only the server and not the client has LZ4 support, provided that
the other options to pg_basebackup don't require the client to
decompress the archive.
Patch by me. Reviewed by Justin Pryzby and Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/CA+TgmoYvpetyRAbbg1M8b3-iHsaN4nsgmWPjOENu5-doHuJ7fA@mail.gmail.com
Commit 3500ccc39b allowed for base backup
targets, meaning that we could do something with the backup other than
send it to the client, but all of those targets had to be baked in to
the core code. This commit makes it possible for extensions to define
additional backup targets.
Patch by me, reviewed by Abhijit Menon-Sen.
Discussion: http://postgr.es/m/CA+TgmoaqvdT-u3nt+_kkZ7bgDAyqDB0i-+XOMmr5JN2Rd37hxw@mail.gmail.com
Both client-side compression and server-side compression are now
supported for zstd. In addition, a backup compressed by the server
using zstd can now be decompressed by the client in order to
accommodate the use of -Fp.
Jeevan Ladhe, with some edits by me.
Discussion: http://postgr.es/m/CA+Tgmobyzfbz=gyze2_LL1ZumZunmaEKbHQxjrFkOR7APZGu-g@mail.gmail.com
This feature adds row filtering for publication tables. When a publication
is defined or modified, an optional WHERE clause can be specified. Rows
that don't satisfy this WHERE clause will be filtered out. This allows a
set of tables to be partially replicated. The row filter is per table. A
new row filter can be added simply by specifying a WHERE clause after the
table name. The WHERE clause must be enclosed by parentheses.
The row filter WHERE clause for a table added to a publication that
publishes UPDATE and/or DELETE operations must contain only columns that
are covered by REPLICA IDENTITY. The row filter WHERE clause for a table
added to a publication that publishes INSERT can use any column. If the
row filter evaluates to NULL, it is regarded as "false". The WHERE clause
only allows simple expressions that don't have user-defined functions,
user-defined operators, user-defined types, user-defined collations,
non-immutable built-in functions, or references to system columns. These
restrictions could be addressed in the future.
If you choose to do the initial table synchronization, only data that
satisfies the row filters is copied to the subscriber. If the subscription
has several publications in which a table has been published with
different WHERE clauses, rows that satisfy ANY of the expressions will be
copied. If a subscriber is a pre-15 version, the initial table
synchronization won't use row filters even if they are defined in the
publisher.
The row filters are applied before publishing the changes. If the
subscription has several publications in which the same table has been
published with different filters (for the same publish operation), those
expressions get OR'ed together so that rows satisfying any of the
expressions will be replicated.
This means all the other filters become redundant if (a) one of the
publications have no filter at all, (b) one of the publications was
created using FOR ALL TABLES, (c) one of the publications was created
using FOR ALL TABLES IN SCHEMA and the table belongs to that same schema.
If your publication contains a partitioned table, the publication
parameter publish_via_partition_root determines if it uses the partition's
row filter (if the parameter is false, the default) or the root
partitioned table's row filter.
Psql commands \dRp+ and \d <table-name> will display any row filters.
Author: Hou Zhijie, Euler Taveira, Peter Smith, Ajin Cherian
Reviewed-by: Greg Nancarrow, Haiying Tang, Amit Kapila, Tomas Vondra, Dilip Kumar, Vignesh C, Alvaro Herrera, Andres Freund, Wei Wang
Discussion: https://www.postgresql.org/message-id/flat/CAHE3wggb715X%2BmK_DitLXF25B%3DjE6xyNCH4YOwM860JR7HarGQ%40mail.gmail.com
Previously, replication slots were released in ProcKill() on error, resulting
in reporting replication slot drop of ephemeral slots after the stats
subsystem was already shut down.
To fix this problem, move replication slot release to a before_shmem_exit()
hook that is called before the stats collector shuts down. There wasn't really
a good reason for the slot handling to be in ProcKill() anyway.
Patch by Masahiko Sawada, with very minor polishing by me.
I, Andres, wrote a test for dropping slots during process exit, but there may
be some OS dependent issues around the number of times FATAL error messages
are displayed due to a still debated libpq issue. So that test will be
committed separately / later.
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-By: Andres Freund <andres@anarazel.de>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoDAeEpAbZEyYJsPZJUmSPaRicVSBObaL7sPaofnKz+9zg@mail.gmail.com
LZ4 compression can be a lot faster than gzip compression, so users
may prefer it even if the compression ratio is not as good. We will
want pg_basebackup to support LZ4 compression and decompression on the
client side as well, and there is a pending patch for that, but it's
by a different author, so I am committing this part separately for
that reason.
Jeevan Ladhe, reviewed by Tushar Ahuja and by me.
Discussion: http://postgr.es/m/CANm22Cg9cArXEaYgHVZhCnzPLfqXCZLAzjwTq7Fc0quXRPfbxA@mail.gmail.com
This extends the logical decoding to also decode sequence increments.
We differentiate between sequences created in the current (in-progress)
transaction, and sequences created earlier. This mixed behavior is
necessary because while sequences are not transactional (increments are
not subject to ROLLBACK), relfilenode changes are. So we do this:
* Changes for sequences created in the same top-level transaction are
treated as transactional, i.e. just like any other change from that
transaction, and discarded in case of a rollback.
* Changes for sequences created earlier are applied immediately, as if
performed outside any transaction. This applies also after ALTER
SEQUENCE, which may create a new relfilenode.
Moreover, if we ever get support for DDL replication, the sequence
won't exist until the transaction gets applied.
Sequences created in the current transaction are tracked in a simple
hash table, identified by a relfilenode. That means a sequence may
already exist, but if a transaction does ALTER SEQUENCE then the
increments for the new relfilenode will be treated as transactional.
For each relfilenode we track the XID of (sub)transaction that created
it, which is needed for cleanup at transaction end. We don't need to
check the XID to decide if an increment is transactional - if we find a
match in the hash table, it has to be the same transaction.
This requires two minor changes to WAL-logging. Firstly, we need to
ensure the sequence record has a valid XID - until now the the increment
might have XID 0 if it was the first change in a subxact. But the
sequence might have been created in the same top-level transaction. So
we ensure the XID is assigned when WAL-logging increments.
The other change is addition of "created" flag, marking increments for
newly created relfilenodes. This makes it easier to maintain the hash
table of sequences that need transactional handling.
Note: This is needed because of subxacts. A XID 0 might still have the
sequence created in a different subxact of the same top-level xact.
This does not include any changes to test_decoding and/or the built-in
replication - those will be committed in separate patches.
A patch adding decoding of sequences was originally submitted by Cary
Huang. This commit reworks various important aspects (e.g. the WAL
logging and transactional/non-transactional handling). However, the
original patch and reviews were very useful.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Hannu Krosing, Andres Freund
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
This fixes a set of issues that have accumulated over the past months
(or years) in various code areas. Most fixes are related to some recent
additions, as of the development of v15.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220124030001.GQ23027@telsasoft.com
In logical replication mode, a WalSender is supposed to be able
to execute any regular SQL command, as well as the special
replication commands. Poor design of the replication-command
parser caused it to fail in various cases, notably:
* semicolons embedded in a command, or multiple SQL commands
sent in a single message;
* dollar-quoted literals containing odd numbers of single
or double quote marks;
* commands starting with a comment.
The basic problem here is that we're trying to run repl_scanner.l
across the entire input string even when it's not a replication
command. Since repl_scanner.l does not understand all of the
token types known to the core lexer, this is doomed to have
failure modes.
We certainly don't want to make repl_scanner.l as big as scan.l,
so instead rejigger stuff so that we only lex the first token of
a non-replication command. That will usually look like an IDENT
to repl_scanner.l, though a comment would end up getting reported
as a '-' or '/' single-character token. If the token is a replication
command keyword, we push it back and proceed normally with repl_gram.y
parsing. Otherwise, we can drop out of exec_replication_command()
without examining the rest of the string.
(It's still theoretically possible for repl_scanner.l to fail on
the first token; but that could only happen if it's an unterminated
single- or double-quoted string, in which case you'd have gotten
largely the same error from the core lexer too.)
In this way, repl_gram.y isn't involved at all in handling general
SQL commands, so we can get rid of the SQLCmd node type. (In
the back branches, we can't remove it because renumbering enum
NodeTag would be an ABI break; so just leave it sit there unused.)
I failed to resist the temptation to clean up some other sloppy
coding in repl_scanner.l while at it. The only externally-visible
behavior change from that is it now accepts \r and \f as whitespace,
same as the core lexer.
Per bug #17379 from Greg Rychlewski. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/17379-6a5c6cfb3f1f5e77@postgresql.org
pg_basebackup's --compression option now lets you write either
"client-gzip" or "server-gzip" instead of just "gzip" to specify
where the compression should be performed. If you write simply
"gzip" it's taken to mean "client-gzip" unless you also use
--target, in which case it is interpreted to mean "server-gzip",
because that's the only thing that makes any sense in that case.
To make this work, the BASE_BACKUP command now takes new
COMPRESSION and COMPRESSION_LEVEL options.
At present, pg_basebackup cannot decompress .gz files, so
server-side compression will cause a failure if (1) -Ft is not
used or (2) -R is used or (3) -D- is used without --no-manifest.
Along the way, I removed the information message added by commit
5c649fe153 which occurred if you
specified no compression level and told you that the default level
had been used instead. That seemed like more output than most
people would want.
Also along the way, this adds a check to the server for
unrecognized base backup options. This repairs a bug introduced
by commit 0ba281cb4b.
This commit also adds some new test cases for pg_verifybackup.
They take a server-side backup with and without compression, and
then extract the backup if we have the OS facilities available
to do so, and then run pg_verifybackup on the extracted
directory. That is a good test of the functionality added by
this commit and also improves test coverage for the backup target
patch (commit 3500ccc39b) and for
pg_verifybackup itself.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+Tgmoa-ST7fMLsVJduOB7Eub=2WjfpHS+QxHVEpUoinf4bOSg@mail.gmail.com
pg_basebackup now has a --target=TARGET[:DETAIL] option. If specfied,
it is sent to the server as the value of the TARGET option to the
BASE_BACKUP command. If DETAIL is included, it is sent as the value of
the new TARGET_DETAIL option to the BASE_BACKUP command. If the
target is anything other than 'client', pg_basebackup assumes that it
will now be the server's job to write the backup in a location somehow
defined by the target, and that it therefore needs to write nothing
locally. However, the server will still send messages to the client
for progress reporting purposes.
On the server side, we now support two additional types of backup
targets. There is a 'blackhole' target, which just throws away the
backup data without doing anything at all with it. Naturally, this
should only be used for testing and debugging purposes, since you will
not actually have a backup when it finishes running. More usefully,
there is also a 'server' target, so you can now use something like
'pg_basebackup -Xnone -t server:/SOME/PATH' to write a backup to some
location on the server. We can extend this to more types of targets
in the future, and might even want to create an extensibility
mechanism for adding new target types.
Since WAL fetching is handled with separate client-side logic, it's
not part of this mechanism; thus, backups with non-default targets
must use -Xnone or -Xfetch.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
In the new approach, all files across all tablespaces are sent in a
single COPY OUT operation. The CopyData messages are no longer raw
archive content; rather, each message is prefixed with a type byte
that describes its purpose, e.g. 'n' signifies the start of a new
archive and 'd' signifies archive or manifest data. This protocol
is significantly more extensible than the old approach, since we can
later create more message types, though not without concern for
backward compatibility.
The new protocol sends a few things to the client that the old one
did not. First, it sends the name of each archive explicitly, instead
of letting the client compute it. This is intended to make it easier
to write future patches that might send archives in a format other
that tar (e.g. cpio, pax, tar.gz). Second, it sends explicit progress
messages rather than allowing the client to assume that progress is
defined by the number of bytes received. This will help with future
features where the server compresses the data, or sends it someplace
directly rather than transmitting it to the client.
The old protocol is still supported for compatibility with previous
releases. The new protocol is selected by means of a new
TARGET option to the BASE_BACKUP command. Currently, the
only supported target is 'client'. Support for additional
targets will be added in a later commit.
Patch by me. The patch set of which this is a part has had review
and/or testing from Jeevan Ladhe, Tushar Ahuja, Suraj Kharage,
Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
The base backup code has accumulated a healthy number of new
features over the years, but it's becoming increasingly difficult
to maintain and further enhance that code because there's no
real separation of concerns. For example, the code that
understands knows the details of how we send data to the client
using the libpq protocol is scattered throughout basebackup.c,
rather than being centralized in one place.
To try to improve this situation, introduce a new 'bbsink' object
which acts as a recipient for archives generated during the base
backup progress and also for the backup manifest. This commit
introduces three types of bbsink: a 'copytblspc' bbsink forwards the
backup to the client using one COPY OUT operation per tablespace and
another for the manifest, a 'progress' bbsink performs command
progress reporting, and a 'throttle' bbsink performs rate-limiting.
The 'progress' and 'throttle' bbsink types also forward the data to a
successor bbsink; at present, the last bbsink in the chain will
always be of type 'copytblspc'. There are plans to add more types
of 'bbsink' in future commits.
This abstraction is a bit leaky in the case of progress reporting,
but this still seems cleaner than what we had before.
Patch by me, reviewed and tested by Andres Freund, Sumanta Mukherjee,
Dilip Kumar, Suraj Kharage, Dipesh Pandit, Tushar Ahuja, Mark Dilger,
and Jeevan Ladhe.
Discussion: https://postgr.es/m/CA+TgmoZGwR=ZVWFeecncubEyPdwghnvfkkdBe9BLccLSiqdf9Q@mail.gmail.com
Discussion: https://postgr.es/m/CA+TgmoZvqk7UuzxsX1xjJRmMGkqoUGYTZLDCH8SmU1xTPr1Xig@mail.gmail.com
During a replication slot creation, an ERROR generated in the same
transaction as the one creating a to-be-exported snapshot would have
left the backend in an inconsistent state, as the associated static
export snapshot state was not being reset on transaction abort, but only
on the follow-up command received by the WAL sender that created this
snapshot on replication slot creation. This would trigger inconsistency
failures if this session tried to export again a snapshot, like during
the creation of a replication slot.
Note that a snapshot export cannot happen in a transaction block, so
there is no need to worry resetting this state for subtransaction
aborts. Also, this inconsistent state would very unlikely show up to
users. For example, one case where this could happen is an
out-of-memory error when building the initial snapshot to-be-exported.
Dilip found this problem while poking at a different patch, that caused
an error in this code path for reasons unrelated to HEAD.
Author: Dilip Kumar
Reviewed-by: Michael Paquier, Zhihong Yu
Discussion: https://postgr.es/m/CAFiTN-s0zA1Kj0ozGHwkYkHwa5U0zUE94RSc_g81WrpcETB5=w@mail.gmail.com
Backpatch-through: 9.6
Two functions, both named check_permissions(), used the same checks to
verify if a user had required privileges to work on replication slots.
This commit removes the duplication, and moves the function doing the
checks to slot.c to be centralized.
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Euler Taveira
Discussion: https://postgr.es/m/CALj2ACUPpVw1u7sQocFVWrSs0n10pt_G_4NPZKSxXK6cW1dErw@mail.gmail.com
Use one fileset for the entire worker lifetime instead of using
separate filesets for each streaming transaction. Now, the
changes/subxacts files for every streaming transaction will be
created under the same fileset and the files will be deleted
after the transaction is completed.
This patch extends the BufFileOpenFileSet and BufFileDeleteFileSet
APIs to allow users to specify whether to give an error on missing
files.
Author: Dilip Kumar, based on suggestion by Thomas Munro
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Move fileset related implementation out of sharedfileset.c to allow its
usage by backends that don't want to share filesets among different
processes. After this split, fileset infrastructure is used by both
sharedfileset.c and worker.c for the named temporary files that survive
across transactions.
Author: Dilip Kumar, based on suggestion by Andres Freund
Reviewed-by: Hou Zhijie, Masahiko Sawada, Amit Kapila
Discussion: https://postgr.es/m/E1mCC6U-0004Ik-Fs@gemulon.postgresql.org
Previously, on the subscriber, we set the error context callback for the
tuple data conversion failures. This commit replaces the existing error
context callback with a comprehensive one so that it shows not only the
details of data conversion failures but also the details of logical change
being applied by the apply worker or table sync worker. The additional
information displayed will be the command, transaction id, and timestamp.
The error context is added to an error only when applying a change but not
while doing other work like receiving data etc.
This will help users in diagnosing the problems that occur during logical
replication. It also can be used for future work that allows skipping a
particular transaction on the subscriber.
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Greg Nancarrow, Haiying Tang, Amit Kapila
Tested-by: Haiying Tang
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
In the code, most places used the term "Stream Stop" for the logical
stream message. This commit improves consistency by renaming LogicalRepMsgType
"LOGICAL_REP_MSG_STREAM_END" to "LOGICAL_REP_MSG_STREAM_STOP".
Author: Masahiko Sawada
Reviewed-by: Hou Zhijie, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDeScrsHhLyEPYqN3sydg6PxAPVBboK=30xJfUVihNZDA@mail.gmail.com
Commit a8fd13cab0 added support for prepared transactions to built-in
logical replication via a new option "two_phase" for a subscription. The
"two_phase" option was not allowed with the existing streaming option.
This commit permits the combination of "streaming" and "two_phase"
subscription options. It extends the pgoutput plugin and the subscriber
side code to add the prepare API for streaming transactions which will
apply the changes accumulated in the spool-file at prepare time.
Author: Peter Smith and Ajin Cherian
Reviewed-by: Vignesh C, Amit Kapila, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAMGcDxeqEpWj3fTXwqhSwBdXd2RS9jzwWscO-XbeCfso6ts3+Q@mail.gmail.com
When some slots are invalidated due to the max_slot_wal_keep_size limit,
the old segment horizon should move forward to stay within the limit.
However, in commit c655077639 we forgot to call KeepLogSeg again to
recompute the horizon after invalidating replication slots. In cases
where other slots remained, the limits would be recomputed eventually
for other reasons, but if all slots were invalidated, the limits would
not move at all afterwards. Repair.
Backpatch to 13 where the feature was introduced.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Marcin Krupowicz <mk@071.ovh>
Discussion: https://postgr.es/m/17103-004130e8f27782c9@postgresql.org
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
The existing code tried to do syscache lookups in an already-failed
transaction, which is problematic to say the least. After some
consideration of alternatives, the best fix seems to be to just drop
type names from the error message altogether. The table and column
names seem like sufficient localization. If the user is unsure what
types are involved, she can check the local and remote table
definitions.
Having done that, we can also discard the LogicalRepTypMap hash
table, which had no other use. Arguably, LOGICAL_REP_MSG_TYPE
replication messages are now obsolete as well; but we should
probably keep them in case some other use emerges. (The complexity
of removing something from the replication protocol would likely
outweigh any savings anyhow.)
Masahiko Sawada and Bharath Rupireddy, per complaint from Andres
Freund. Back-patch to v10 where this code originated.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
During decoding for speculative inserts, we were relying for cleaning
toast hash on confirmation records or next change records. But that
could lead to multiple problems (a) memory leak if there is neither a
confirmation record nor any other record after toast insertion for a
speculative insert in the transaction, (b) error and assertion failures
if the next operation is not an insert/update on the same table.
The fix is to start queuing spec abort change and clean up toast hash
and change record during its processing. Currently, we are queuing the
spec aborts for both toast and main table even though we perform cleanup
while processing the main table's spec abort record. Later, if we have a
way to distinguish between the spec abort record of toast and the main
table, we can avoid queuing the change for spec aborts of toast tables.
Reported-by: Ashutosh Bapat
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Backpatch-through: 9.6, where it was introduced
Discussion: https://postgr.es/m/CAExHW5sPKF-Oovx_qZe4p5oM6Dvof7_P+XgsNAViug15Fm99jA@mail.gmail.com
While decoding the multi-insert WAL we can't clean the toast untill we get
the last insert of that WAL record. Now if we stream the changes before we
get the last change, the memory for toast chunks won't be released and we
expect the txn to have streamed all changes after streaming. This
restriction is mainly to ensure the correctness of streamed transactions
and it doesn't seem worth uplifting such a restriction just to allow this
case because anyway we will stream the transaction once such an insert is
complete.
Previously we were using two different flags (one for toast tuples and
another for speculative inserts) to indicate partial changes. Now instead
we replaced both of them with a single flag to indicate partial changes.
Reported-by: Pavan Deolasee
Author: Dilip Kumar
Reviewed-by: Pavan Deolasee, Amit Kapila
Discussion: https://postgr.es/m/CABOikdN-_858zojYN-2tNcHiVTw-nhxPwoQS4quExeweQfG1Ug@mail.gmail.com
The worker.c global wrconn is only meant to be used by logical apply/
tablesync workers, but there are other variables with the same name. To
reduce future confusion rename the global from "wrconn" to
"LogRepWorkerWalRcvConn".
While this is just cosmetic, it seems better to backpatch it all the way
back to 10 where this code appeared, to avoid future backpatching
issues.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://postgr.es/m/CAHut+Pu7Jv9L2BOEx_Z0UtJxfDevQSAUW2mJqWU+CtmDrEZVAg@mail.gmail.com
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
Currently, replication slot statistics are updated at prepare, commit, and
rollback. Now, if the transaction is interrupted the stats might not get
updated. Fixed this by updating replication statistics after every
stream/spill.
In passing update the docs to change the description of some of the slot
stats.
Author: Vignesh C, Sawada Masahiko
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Previously, we used to use the array of size max_replication_slots to
store stats for replication slots. But that had two problems in the cases
where a message for dropping a slot gets lost: 1) the stats for the new
slot are not recorded if the array is full and 2) writing beyond the end
of the array if the user reduces the max_replication_slots.
This commit uses HTAB for replication slot statistics, resolving both
problems. Now, pgstat_vacuum_stat() search for all the dead replication
slots in stats hashtable and tell the collector to remove them. To avoid
showing the stats for the already-dropped slots, pg_stat_replication_slots
view searches slot stats by the slot name taken from pg_replication_slots.
Also, we send a message for creating a slot at slot creation, initializing
the stats. This reduces the possibility that the stats are accumulated
into the old slot stats when a message for dropping a slot gets lost.
Reported-by: Andres Freund
Author: Sawada Masahiko, test case by Vignesh C
Reviewed-by: Amit Kapila, Vignesh C, Dilip Kumar
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
This adds the statistics about total transactions count and total
transaction data logically sent to the decoding output plugin from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats.
Suggested-by: Andres Freund
Author: Vignesh C and Amit Kapila
Reviewed-by: Sawada Masahiko, Amit Kapila
Discussion: https://postgr.es/m/20210319185247.ldebgpdaxsowiflw@alap3.anarazel.de
Previously, the XLogReader module would fetch new input data using a
callback function. Redesign the interface so that it tells the caller
to insert more data with a special return value instead. This API suits
later patches for prefetching, encryption and maybe other future
projects that would otherwise require continually extending the callback
interface.
As incidental cleanup work, move global variables readOff, readLen and
readSegNo inside XlogReaderState.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Author: Heikki Linnakangas <hlinnaka@iki.fi> (parts of earlier version)
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Takashi Menjo <takashi.menjo@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20190418.210257.43726183.horiguchi.kyotaro%40lab.ntt.co.jp
The output plugin accepts a new parameter (messages) that controls if
logical decoding messages are written into the replication stream. It is
useful for those clients that use pgoutput as an output plugin and needs
to process messages that were written by pg_logical_emit_message().
Although logical streaming replication protocol supports logical
decoding messages now, logical replication does not use this feature yet.
Author: David Pirotte, Euler Taveira
Reviewed-by: Euler Taveira, Andres Freund, Ashutosh Bapat, Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
Instead of using multiple parameters in parse_ouput_parameters function
signature, use the struct PGOutputData that encapsulates all pgoutput
options. It will be useful for future work where we need to add other
options in pgoutput.
Author: Euler Taveira
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CADK3HHJ-+9SO7KuRLH=9Wa1rAo60Yreq1GFNkH_kd0=CdaWM+A@mail.gmail.com
Along with gid, this provides a different way to identify the transaction.
The users that use xid in some way to prepare the transactions can use it
to filter prepare transactions. The later commands COMMIT PREPARED or
ROLLBACK PREPARED carries both identifiers, providing an output plugin the
choice of what to use.
Author: Markus Wanner
Reviewed-by: Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/ee280000-7355-c4dc-e47b-2436e7be959c@enterprisedb.com
While looking at Robert Foggia's report, I noticed a passel of
other issues in the same area:
* The scheme for backslash-quoting newlines in pathnames is just
wrong; it will misbehave if the last ordinary character in a pathname
is a backslash. I'm not sure why we're bothering to allow newlines
in tablespace paths, but if we're going to do it we should do it
without introducing other problems. Hence, backslashes themselves
have to be backslashed too.
* The author hadn't read the sscanf man page very carefully, because
this code would drop any leading whitespace from the path. (I doubt
that a tablespace path with leading whitespace could happen in
practice; but if we're bothering to allow newlines in the path, it
sure seems like leading whitespace is little less implausible.) Using
sscanf for the task of finding the first space is overkill anyway.
* While I'm not 100% sure what the rationale for escaping both \r and
\n is, if the idea is to allow Windows newlines in the file then this
code failed, because it'd throw an error if it saw \r followed by \n.
* There's no cross-check for an incomplete final line in the map file,
which would be a likely apparent symptom of the improper-escaping
bug.
On the generation end, aside from the escaping issue we have:
* If needtblspcmapfile is true then do_pg_start_backup will pass back
escaped strings in tablespaceinfo->path values, which no caller wants
or is prepared to deal with. I'm not sure if there's a live bug from
that, but it looks like there might be (given the dubious assumption
that anyone actually has newlines in their tablespace paths).
* It's not being very paranoid about the possibility of random stuff
in the pg_tblspc directory. IMO we should ignore anything without an
OID-like name.
The escaping rule change doesn't seem back-patchable: it'll require
doubling of backslashes in the tablespace_map file, which is basically
a basebackup format change. The odds of that causing trouble are
considerably more than the odds of the existing bug causing trouble.
The rest of this seems somewhat unlikely to cause problems too,
so no back-patch.
Commit 0aa8a01d04 extends the output plugin API to allow decoding of
prepared xacts and allowed the user to enable/disable the two-phase option
via pg_logical_slot_get_changes(). This can lead to a problem such that
the first time when it gets changes via pg_logical_slot_get_changes()
without two_phase option enabled it will not get the prepared even though
prepare is after consistent snapshot. Now next time during getting changes,
if the two_phase option is enabled it can skip prepare because by that
time start decoding point has been moved. So the user will only get commit
prepared.
Allow to enable/disable this option at the create slot time and default
will be false. It will break the existing slots which is fine in a major
release.
Author: Ajin Cherian
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
In commit a271a1b50e, we allowed decoding at prepare time and the prepare
was decoded again if there is a restart after decoding it. It was done
that way because we can't distinguish between the cases where we have not
decoded the prepare because it was prior to consistent snapshot or we have
decoded it earlier but restarted. To distinguish between these two cases,
we have introduced an initial_consistent_point at the slot level which is
an LSN at which we found a consistent point at the time of slot creation.
This is also the point where we have exported a snapshot for the initial
copy. So, prepare transaction prior to this point are sent along with
commit prepared.
This commit bumps SNAPBUILD_VERSION because of change in SnapBuild. It
will break existing slots which is fine in a major release.
Author: Ajin Cherian, based on idea by Andres Freund
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
Tomas Vondra
Andres Freund
Amit Kapila
Robert Haas
Michael Paquier
Tom Lane
Jeff Davis
Bruce Momjian
Alvaro Herrera
Peter Eisentraut
Thomas Munro