Only the pgstat_send_* functions that are called from outside pgstat*.c are
renamed (the rest will go away). This is done separately from the - quite
large - shared memory statistics patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
Soon the stats collector will be no more, with statistics instead getting
stored in shared memory. There are a lot of references to the stats collector
in comments. This commit replaces most of these references with "cumulative
statistics system", with the remaining ones getting replaced as part of
subsequent commits.
This is done separately from the - quite large - shared memory statistics
patch to make review easier.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Discussion: https://postgr.es/m/20220308205351.2xcn6k4x5yivcxyd@alap3.anarazel.de
The transactional integration code is largely independent from the rest of
pgstat.c. Subsequent commits will add more related code.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220404041516.cctrvpadhuriawlq@alap3.anarazel.de
It might seem pointless to allow use of dsm in single user mode, but otherwise
subsystems might need dedicated single user mode code paths.
Besides changing the assert, all that's needed is to make some windows code
assuming the presence of postmaster conditional.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGL9hY_VY=+oUK+Gc1iSRx-Ls5qeYJ6q=dQVZnT3R63Taw@mail.gmail.com
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
This patch allows "PGC_SUSET" parameters to be set by non-superusers
if they have been explicitly granted the privilege to do so.
The privilege to perform ALTER SYSTEM SET/RESET on a specific parameter
can also be granted.
Such privileges are cluster-wide, not per database. They are tracked
in a new shared catalog, pg_parameter_acl.
Granting and revoking these new privileges works as one would expect.
One caveat is that PGC_USERSET GUCs are unaffected by the SET privilege
--- one could wish that those were handled by a revocable grant to
PUBLIC, but they are not, because we couldn't make it robust enough
for GUCs defined by extensions.
Mark Dilger, reviewed at various times by Andrew Dunstan, Robert Haas,
Joshua Brindle, and myself
Discussion: https://postgr.es/m/3D691E20-C1D5-4B80-8BA5-6BEB63AF3029@enterprisedb.com
The test created a 1m row table in order to test parallel operation of
JSON_VALUE. However, this was more than were needed for the test, so
save time by halving it, and also by making the table unlogged.
Experimentation shows that this size is only a little above the number
required to generate the expected output.
Per gripe from Andres Freund
Discussion: https://postgr.es/m/20220406022118.3ocqvhxr6kciw5am@alap3.anarazel.de
In commit 27e1f1456, create_append_plan() only allowed the subplan
created from a given subpath to be executed asynchronously when it was
an async-capable ForeignPath. To extend coverage, this patch handles
cases when the given subpath includes some other Path types as well that
can be omitted in the plan processing, such as a ProjectionPath directly
atop an async-capable ForeignPath, allowing asynchronous execution in
partitioned-scan/partitioned-join queries with non-Var tlist expressions
and more UNION queries.
Andrey Lepikhov and Etsuro Fujita, reviewed by Alexander Pyhalov and
Zhihong Yu.
Discussion: https://postgr.es/m/659c37a8-3e71-0ff2-394c-f04428c76f08%40postgrespro.ru
Commit 4a39f87acd changed the aggregated log format. Problem is, now
the explanatory paragraph for the log line in the document is too
long. Also the log format included more optional columns, and it's
harder to parse the log lines. This commit tries to solve the
problems.
- There's no optional log columns anymore. If a column is not
meaningful with provided pgbench option, it will be presented as 0.
- Reorder the log columns so that it's easier to parse them.
- Adjust explanatory paragraph for the log line in the doc.
Discussion: https://postgr.es/m/flat/202203280757.3tu4ovs3petm%40alvherre.pgsql
It's possible for the query that "waits for restart" to complete a
successful iteration before the postmaster has noticed its SIGKILL'd
child and begun the restart cycle. (This is a bit hard to believe
perhaps, but it's been seen at least twice in the buildfarm, mainly
on ancient platforms that likely have quirky schedulers.)
To provide a more secure interlock, wait for the other session
we're using to report that it's been forcibly shut down.
Patch by me, based on a suggestion from Andres Freund.
Back-patch to v14 where this test case came in.
Discussion: https://postgr.es/m/1801850.1649047827@sss.pgh.pa.us
The pg_fatal log which included filesizes were using UINT64_FORMAT for
the size_t variables, which failed on 32 bit buildfarm animals. Change
to using plain int instead, which is in line with how digestControlFile
is doing it already.
Per buildfarm animals florican and lapwing.
Discussion: https://postgr.es/m/13C2BF64-4A6D-47E4-9181-3A658F00C9B7@yesql.se
These clauses allow the user to specify how data from nested paths are
joined, allowing considerable freedom in shaping the tabular output of
JSON_TABLE.
PLAN DEFAULT allows the user to specify the global strategies when
dealing with sibling or child nested paths. The is often sufficient to
achieve the necessary goal, and is considerably simpler than the full
PLAN clause, which allows the user to specify the strategy to be used
for each named nested path.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
Commits 74cf7d46 and a61daa14 fixed pg_upgrade bugs involving oversights
in how relfrozenxid or relminmxid are carried forward or initialized.
Corruption caused by bugs of this nature was ameliorated by commit
78db307bb2, which taught VACUUM to always overwrite existing invalid
relfrozenxid or relminmxid values that are apparently "in the future".
Extend that work now by showing a warning in the event of overwriting
either relfrozenxid or relminmxid due to an existing value that is "in
the future". There is probably a decent chance that the sanity checks
added by commit 699bf7d05c will raise an error before VACUUM reaches
this point, but we shouldn't rely on that.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-WzmRZEzeGvLv8yDW0AbFmSvJjTziORqjVUrf74mL4GL0Ww@mail.gmail.com
There's a race condition if a file changes in the source system
after we have collected the file list. If the file becomes larger,
we only fetched up to its original size. That can easily result in
a truncated file. That's not a problem for relation files, files
in pg_xact, etc. because any actions on them will be replayed from
the WAL. However, configuration files are affected.
This commit mitigates the race condition by fetching small files in
whole, even if they have grown. A test is added in which an extra
file copied is concurrently grown with the output of pg_rewind thus
guaranteeing it to have changed in size during the operation. This
is not a full fix: we still believe the original file size for files
larger than 1 MB. That should be enough for configuration files,
and doing more than that would require big changes to the chunking
logic in libpq_source.c.
This mitigates the race condition if the file is modified between
the original scan of files and copying the file, but there's still
a race condition if a file is changed while it's being copied.
That's a much smaller window, though, and pg_basebackup has the
same issue.
This race can be seen with pg_auto_failover, which frequently uses
ALTER SYSTEM, which updates postgresql.auto.conf. Often, pg_rewind
will fail, because the postgresql.auto.conf file changed concurrently
and a partial version of it was copied to the target. The partial
file would fail to parse, preventing the server from starting up.
Author: Heikki Linnakangas
Reviewed-by: Cary Huang
Discussion: https://postgr.es/m/f67feb24-5833-88cb-1020-19a4a2b83ac7%40iki.fi
The test logic is extended with two new concepts:
- Addition of a compression command called compress_cmd, executed
between restore_cmd and dump_cmd to control the contents of the dumps.
In the case of this commit, this is used to compress or decompress
elements of a dump to test new code paths.
- Addition of a new flag called compile_option, to check if a set of
tests can be executed depending on the ./configure options used in a
given build.
The tests introduced here are for gzip, but they are designed so as they
can easily be extended for new compression methods.
Author: Georgios Kokolatos, Rachel Heaton
Discussion: https://postgr.es/m/faUNEOpts9vunEaLnmxmG-DldLSg_ql137OC3JYDmgrOMHm1RvvWY2IdBkv_CRxm5spCCb_OmKNk2T03TMm0fBEWveFF9wA1WizPuAgB7Ss=@protonmail.com
* Move the execution pruning initialization steps that are common
between both ExecInitAppend() and ExecInitMergeAppend() into a new
function ExecInitPartitionPruning() defined in execPartition.c.
Those steps include creation of a PartitionPruneState to be used for
all instances of pruning and determining the minimal set of child
subplans that need to be initialized by performing initial pruning if
needed, and finally adjusting the subplan_map arrays in the
PartitionPruneState to reflect the new set of subplans remaining
after initial pruning if it was indeed performed.
ExecCreatePartitionPruneState() is no longer exported out of
execPartition.c and has been renamed to CreatePartitionPruneState()
as a local sub-routine of ExecInitPartitionPruning().
* Likewise, ExecFindInitialMatchingSubPlans() that was in charge of
performing initial pruning no longer needs to be exported. In fact,
since it would now have the same body as the more generally named
ExecFindMatchingSubPlans(), except differing in the value of
initial_prune passed to the common subroutine
find_matching_subplans_recurse(), it seems better to remove it and add
an initial_prune argument to ExecFindMatchingSubPlans().
* Add an ExprContext field to PartitionPruneContext to remove the
implicit assumption in the runtime pruning code that the ExprContext to
use to compute pruning expressions that need one can always rely on the
PlanState providing it. A future patch will allow runtime pruning (at
least the initial pruning steps) to be performed without the
corresponding PlanState yet having been created, so this will help.
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CA+HiwqEYCpEqh2LMDOp9mT+4-QoVe8HgFMKBjntEMCTZLpcCCA@mail.gmail.com
The expected backend message after SIGQUIT changed in commit
7e784d1dc, but we missed updating this test case. Also, experience
shows that we might sometimes get "could not send data to server"
instead of either of the libpq messages the test is looking for.
Per report from Mark Dilger. Back-patch to v14 where the
backend message changed.
Discussion: https://postgr.es/m/17BD82D7-49AC-40C9-8204-E7ADD30321A0@enterprisedb.com
The previous coding of dshash_seq_next(), on the first call, accessed
status->hash_table->size_log2 without holding a partition lock and without
guaranteeing that ensure_valid_bucket_pointers() had ever been called.
That oversight turns out to not have immediately visible effects, because
bucket 0 is always in partition 0, and ensure_valid_bucket_pointers() was
called after acquiring the partition lock. However,
PARTITION_FOR_BUCKET_INDEX() with a size_log2 of 0 ends up triggering formally
undefined behaviour.
Simplify by accessing partition 0, without using PARTITION_FOR_BUCKET_INDEX().
While at it, remove dshash_get_current(), there is no convincing use
case. Also polish a few comments.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGL9hY_VY=+oUK+Gc1iSRx-Ls5qeYJ6q=dQVZnT3R63Taw@mail.gmail.com
These would all need to be rephrased when moving to shared memory stats, but
since they don't provide actual information right now, remove them instead.
The comments for PgStat_Msg* are left in, because they will all be removed as
part of the shared memory stats patch.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
This feature allows jsonb data to be treated as a table and thus used in
a FROM clause like other tabular data. Data can be selected from the
jsonb using jsonpath expressions, and hoisted out of nested structures
in the jsonb to form multiple rows, more or less like an outer join.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zhihong Yu (whose
name I previously misspelled), Himanshu Upadhyaya, Daniel Gustafsson,
Justin Pryzby.
Discussion: https://postgr.es/m/7e2cb85d-24cf-4abb-30a5-1a33715959bd@postgrespro.ru
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
This is a significantly enhanced version of
3a51306722 (that was later reverted).
There is also much more test coverage for various psql features now.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com> (earlier version)
Reviewed-by: Daniel Verite <daniel@manitou-mail.org> (earlier version)
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Reviewed-by: vignesh C <vignesh21@gmail.com> (earlier version)
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
This script runs the core regression tests with quite a small value of
shared_buffers, making it prone to breakage due to synchronize_seqscans
kicking in where the tests don't expect that. Disable that feature to
stabilize the tests.
Discussion: https://postgr.es/m/1258185.1648876239@sss.pgh.pa.us
Commit f4fb45d15c tried to free memory during aggregate finalization.
This cause issues, particularly when used as a window function, so stop
doing that.
Per complaint by Jaime Casanova and diagnosis by Andres Freund
Discussion: https://postgr.es/m/YkfeMNYRCGhySKyg@ahch-to
Before this patch, there was some code that tried to make sure that the
buffer was always big enough at the start, and then asserted that it
didn't need to be enlarged later. However, the code to make sure it was
big enough at the start doesn't actually work, and therefore it was
possible to fail an assertion and crash later.
Remove the code that tries to make sure the buffer is always big enough
at the start in favor of enlarging the buffer as we go along whenever
that is necessary.
The mistake probably happened because, on the server side, we do
actually need to guarantee that the buffer is big enough at the start
to avoid subsequent resizings. However, in that case, the calling
code makes promises about how much data it will provide at once, but
here, that's not the case.
Report by Justin Pryzby. Analysis by me. Patch by Dipesh Pandit.
Discussion: http://postgr.es/m/20220330143536.GG28503@telsasoft.com
The general usage pattern when we store tuples in tuplesort.c is that
we store a series of tuples one by one then either perform a sort or spill
them to disk. In the common case, there is no pfreeing of already stored
tuples. For the common case since we do not individually pfree tuples, we
have very little need for aset.c memory allocation behavior which
maintains freelists and always rounds allocation sizes up to the next
power of 2 size.
Here we conditionally use generation.c contexts for storing tuples in
tuplesort.c when the sort will never be bounded. Unfortunately, the
memory context to store tuples is already created by the time any calls
would be made to tuplesort_set_bound(), so here we add a new sort option
that allows callers to specify if they're going to need a bounded sort or
not. We'll use a standard aset.c allocator when this sort option is not
set.
Extension authors must ensure that the TUPLESORT_ALLOWBOUNDED flag is
used when calling tuplesort_begin_* for any sorts that make a call to
tuplesort_set_bound().
Author: David Rowley
Reviewed-by: Andy Fan
Discussion: https://postgr.es/m/CAApHDvoH4ASzsAOyHcxkuY01Qf++8JJ0paw+03dk+W25tQEcNQ@mail.gmail.com
This replaces the bool flag for randomAccess. An upcoming patch requires
adding another option, so instead of breaking the API for that, then
breaking it again one day if we add more options, let's just break it
once. Any boolean options we add in the future will just make use of an
unused bit in the flags.
Any extensions making use of tuplesorts will need to update their code
to pass TUPLESORT_RANDOMACCESS instead of true for randomAccess.
TUPLESORT_NONE can be used for a set of empty options.
Author: David Rowley
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAApHDvoH4ASzsAOyHcxkuY01Qf%2B%2B8JJ0paw%2B03dk%2BW25tQEcNQ%40mail.gmail.com
Here we make a series of improvements to the generation memory
allocator, namely:
1. Allow generation contexts to have a minimum, initial and maximum block
sizes. The standard allocator allows this already but when the generation
context was added, it only allowed fixed-sized blocks. The problem with
fixed-sized blocks is that it's difficult to choose how large to make the
blocks. If the chosen size is too small then we'd end up with a large
number of blocks and a large number of malloc calls. If the block size is
made too large, then memory is wasted.
2. Add support for "keeper" blocks. This is a special block that is
allocated along with the context itself but is never freed. Instead,
when the last chunk in the keeper block is freed, we simply mark the block
as empty to allow new allocations to make use of it.
3. Add facility to "recycle" newly empty blocks instead of freeing them
and having to later malloc an entire new block again. We do this by
recording a single GenerationBlock which has become empty of any chunks.
When we run out of space in the current block, we check to see if there is
a "freeblock" and use that if it contains enough space for the allocation.
Author: David Rowley, Tomas Vondra
Reviewed-by: Andy Fan
Discussion: https://postgr.es/m/d987fd54-01f8-0f73-af6c-519f799a0ab8@enterprisedb.com
When dispatching sort operations to specialized variants, commit
69749243 failed to handle the case where CLUSTER-sort decides not to
initialize datum1 and isnull1. Fix by hoisting that decision up a level
and advertising whether datum1 can be relied on, in the Tuplesortstate
object.
Per reports from UBsan and Valgrind build farm animals, while running
the cluster.sql test.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAFBsxsF1TeK5Fic0M%2BTSJXzbKsY6aBqJGNj6ptURuB09ZF6k_w%40mail.gmail.com
datetime.c's parsing logic has assumed that strtod() will accept
a string that looks like ".", which it does in glibc, but not on
some less-common platforms such as AIX. The result of this was
that datetime fields like "123." would be accepted on some platforms
but not others; which is a sufficiently odd case that it's not that
surprising we've heard no field complaints. But commit e39f99046
extended that assumption to new places, and happened to add a test
case that exposed the platform dependency. Remove this dependency
by special-casing situations without any digits after the decimal
point.
(Again, this is in part a pre-existing bug but I don't feel a
compulsion to back-patch.)
Also, rearrange e39f99046's changes in formatting.c to avoid a
Coverity complaint that we were copying an uninitialized field.
Discussion: https://postgr.es/m/1592893.1648969747@sss.pgh.pa.us
Non-aggressive VACUUMs were at a gratuitous disadvantage (relative to
aggressive VACUUMs) around advancing relfrozenxid and relminmxid before
now. The issue only came up when concurrent activity unset some heap
page's visibility map bit right as VACUUM was considering if the page
should get counted in frozenskipped_pages. The non-aggressive case
would recheck the all-frozen bit at this point. The aggressive case
reasoned that the page (a skippable page) must have at least been
all-frozen in the recent past, so skipping it won't make relfrozenxid
advancement unsafe (which is never okay for aggressive VACUUMs).
The recheck created a window for some other backend to confuse matters
for VACUUM. If the page's VM bit turned out to be unset, VACUUM would
conclude that the page was _never_ all-frozen. frozenskipped_pages was
not incremented, and yet VACUUM couldn't back out of skipping at this
late stage (it couldn't choose to scan the page instead). This made it
unsafe to advance relfrozenxid later on.
Consistently avoid the issue by generalizing how we skip frozen pages
during aggressive VACUUMs: take the same approach when skipping any
skippable page range during aggressive and non-aggressive VACUUMs alike.
The new approach makes ranges (not individual pages) the fundamental
unit of skipping using the visibility map. frozenskipped_pages is
replaced with a boolean flag that represents whether some skippable
range with one or more all-visible pages was actually skipped.
It is safe for VACUUM to treat a page as all-frozen provided it at least
had its all-frozen bit set after the OldestXmin cutoff was established.
VACUUM is only required to scan pages that might have XIDs < OldestXmin
(unfrozen XIDs) to be able to safely advance relfrozenxid. Tuples
concurrently inserted on "skipped" pages can be thought of as equivalent
to tuples concurrently inserted on a block >= rel_pages.
It's possible that the issue this commit fixes hardly ever came up in
practice. But we only had to be unlucky once to lose out on advancing
relfrozenxid -- a single affected heap page was enough to throw VACUUM
off. That seems like something to avoid on general principle. This is
similar to an issue fixed by commit 44fa8488, which taught vacuumlazy.c
to not give up on non-aggressive relfrozenxid advancement just because a
cleanup lock wasn't immediately available on some heap page.
Skipping an all-visible range is now explicitly structured as a choice
made by non-aggressive VACUUMs, by weighing known costs (scanning extra
skippable pages to freeze their tuples early) against known benefits
(advancing relfrozenxid early). This works in essentially the same way
as it always has (don't skip ranges < SKIP_PAGES_THRESHOLD). We could
do much better here in the future by considering other relevant factors.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzn6bGJGfOy3zSTJicKLw99PHJeSOQBOViKjSCinaxUKDQ@mail.gmail.com
Discussion: https://postgr.es/m/CA%2BTgmoZiSOY6H7aadw5ZZGm7zYmfDzL6nwmL5V7GL4HgJgLF_w%40mail.gmail.com
When VACUUM set relfrozenxid before now, it set it to whatever value was
used to determine which tuples to freeze -- the FreezeLimit cutoff.
This approach was very naive. The relfrozenxid invariant only requires
that new relfrozenxid values be <= the oldest extant XID remaining in
the table (at the point that the VACUUM operation ends), which in
general might be much more recent than FreezeLimit.
VACUUM now carefully tracks the oldest remaining XID/MultiXactId as it
goes (the oldest remaining values _after_ lazy_scan_prune processing).
The final values are set as the table's new relfrozenxid and new
relminmxid in pg_class at the end of each VACUUM. The oldest XID might
come from a tuple's xmin, xmax, or xvac fields. It might even come from
one of the table's remaining MultiXacts.
Final relfrozenxid values must still be >= FreezeLimit in an aggressive
VACUUM (FreezeLimit still acts as a lower bound on the final value that
aggressive VACUUM can set relfrozenxid to). Since standard VACUUMs
still make no guarantees about advancing relfrozenxid, they might as
well set relfrozenxid to a value from well before FreezeLimit when the
opportunity presents itself. In general standard VACUUMs may now set
relfrozenxid to any value > the original relfrozenxid and <= OldestXmin.
Credit for the general idea of using the oldest extant XID to set
pg_class.relfrozenxid at the end of VACUUM goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkymFbz6D_vL+jmqSn_5q1wsFvFrE+37yLgL_Rkfd6Gzg@mail.gmail.com
DecodeInterval (interval input) was careless about integer-overflow
hazards, allowing bogus results to be obtained for sufficiently
large input values. Also, since it initially converted the input
to a "struct tm", it was impossible to produce the full range of
representable interval values.
Meanwhile, EncodeInterval (interval output) and a few other
functions could suffer failures if asked to process sufficiently
large interval values, because they also relied on being able to
represent an interval in "struct tm" which is not designed to
handle that.
Fix all this stuff by introducing new struct types that are more
fit for purpose.
While this is clearly a bug fix, it's also an API break for any
code that's calling these functions directly. So back-patching
doesn't seem wise, especially in view of the lack of field
complaints.
Joe Koshakow, editorialized a bit by me
Discussion: https://postgr.es/m/CAAvxfHff0JLYHwyBrtMx_=6wr=k2Xp+D+-X3vEhHjJYMj+mQcg@mail.gmail.com
Cover some cases that would have been broken by a proposed patch,
but we failed to notice for lack of test coverage. I'm pushing
this separately mainly to memorialize that it *is* our historical
behavior.
Discussion: https://postgr.es/m/1344498.1648920056@sss.pgh.pa.us
Move some of the heap_vacuum_rel() instrumentation related variables to
the scope where they're actually needed. Also reorder some of the
variable declarations at the start of heap_vacuum_rel() so that related
variables appear together.
This is essentially the same as applying VACUUM FULL to a partitioned
table, which has been supported since commit 3c3bb99330 (March 2017).
While there's no great use case in applying CLUSTER to partitioned
tables, we don't have any strong reason not to allow it either.
For now, partitioned indexes cannot be marked clustered, so an index
must always be specified.
While at it, rename some variables that were RangeVars during the
development that led to 8bc717cb88 but never made it that way to the
source tree; there's no need to perpetuate names that have always been
more confusing than helpful.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/20201028003312.GU9241@telsasoft.com
Discussion: https://postgr.es/m/20200611153502.GT14879@telsasoft.com
The buildfarm has revealed some instability in results from catalog
queries in tests from commit 1a36bc9dba. Cure this by adding ORDER BY
to such queries.
Previously, the specialized tuplesort routine inlined handling for
reverse-sort and NULLs-ordering but called the datum comparator via a
pointer in the SortSupport struct parameter. Testing has showed that we
can get a useful performance gain by specializing datum comparison for
the different representations of abbreviated keys -- signed and unsigned
64-bit integers and signed 32-bit integers. Almost all abbreviatable data
types will benefit -- the only exception for now is numeric, since the
datum comparison is more complex. The performance gain depends on data
type and input distribution, but often falls in the range of 10-20% faster.
Thomas Munro
Reviewed by Peter Geoghegan, review and performance testing by me
Discussion:
https://www.postgresql.org/message-id/CA%2BhUKGKKYttZZk-JMRQSVak%3DCXSJ5fiwtirFf%3Dn%3DPAbumvn1Ww%40mail.gmail.com
322becb has changed upgradecheck to use the TAP tests, discarding
pg_upgrade's tests in bincheck. However, this is proving to be a bad
idea for the Windows buildfarm clients that use MSVC when TAP tests are
disabled as this causes a hard failure at the pg_upgrade step.
This commit disables upgradecheck, moving the execution of the tests of
pg_upgrade to bincheck, as per an initial suggestion from Andres
Freund, so as the buildfarm is able to live happily with those changes.
While on it, remove the routine that was used by upgradecheck to
create databases whose names are generated with a range of ASCII
characters as it is not used since 322becb. upgradecheck is removed
from the CI script for Windows, as bincheck takes care of that now.
Per report from buildfarm member hamerkop (MSVC 2017 without a TAP
setup).
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/YkbnpriYEAagZ2wH@paquier.xyz
The current implementation supports exactly one IP address in a server
certificate's Common Name, which is brittle (the strings must match
exactly). This patch adds support for IPv4 and IPv6 addresses in a
server's Subject Alternative Names.
Per discussion on-list:
- If the client's expected host is an IP address, we allow fallback to
the Subject Common Name if an iPAddress SAN is not present, even if
a dNSName is present. This matches the behavior of NSS, in
violation of the relevant RFCs.
- We also, counter-intuitively, match IP addresses embedded in dNSName
SANs. From inspection this appears to have been the behavior since
the SAN matching feature was introduced in acd08d76.
- Unlike NSS, we don't map IPv4 to IPv6 addresses, or vice-versa.
Author: Jacob Champion <pchampion@vmware.com>
Co-authored-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Co-authored-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/9f5f20974cd3a4091a788cf7f00ab663d5fcdffe.camel@vmware.com
This makes the code more consistent with SpGiST, GiST and GIN, that
already use this style, and the idea is to make easier the introduction
of more sanity checks for each of these AM-specific macros. BRIN uses a
different set of macros to get a page's type and flags, so it has no
need for something similar.
Author: Matthias van de Meent
Discussion: https://postgr.es/m/CAEze2WjE3+tGO9Fs9+iZMU+z6mMZKo54W1Zt98WKqbEUHbHOBg@mail.gmail.com
This commit includes a set of improvements to help with the debugging of
failures in these new TAP tests:
- Instead of a plain diff command to compare the dumps generated, use
File::Compare::compare for the same effect. diff is still used to
provide more context in the event of an error.
- Log the contents of regression.diffs if the pg_regress command fails.
- Unify the format of the logs generated, getting inspiration from the
style used in 027_stream_regress.pl.
wrasse is the only buildfarm member that has reported a failure until
now after the introduction of 322becb, complaining that the dumps
generated do not match, and I am lacking information to understand what
is going in this environment.
This simplifies a lot of code in the tests of pg_upgrade without
sacrificing its coverage:
- Removal of test.sh used for builds with make, that has accumulated
over the years tweaks for problems that are solved in a duplicated way
by the centralized TAP framework (initialization of the various
environment variables PG*, port selection).
- Removal of the code in MSVC to test pg_upgrade. This was roughly a
duplicate of test.sh adapted for Windows, with an extra footprint of
a pg_regress command and all the assumptions behind it.
Support for upgrades with older versions is changed, not removed.
test.sh was able to set up the regression database on the old instance
by launching itself the pg_regress command and a dependency to the
source tree of thd old cluster, with tweaks on the command arguments to
adapt across the versions used. This created a backward-compatibility
dependency with older pg_regress commands, and recent changes like
d1029bb have made that much more complicated.
Instead, this commit allows tests with older major versions by
specifying a path to a SQL dump (taken with pg_dumpall from the old
cluster's installation) that will be loaded into the old instance to
upgrade instead of running pg_regress, through an optional environment
variable called $olddump. This requires a second variable called
$oldinstall to point to the base path of the installation of the old
cluster. This method is more in line with the buildfarm client that
uses a set of static dumps to set up an old instance, so hopefully we
will be able to reuse what is introduced in this commit there. The last
step of the tests that checks for differences between the two dumps
taken still needs to be improved as it can fail, requiring a manual
lookup at the dumps. This is not different from the old way of testing
where things could fail at the last step.
Support for EXTRA_REGRESS_OPTS is kept. vcregress.pl in the MSVC
scripts still handles the test of pg_upgrade with its upgradecheck, and
bincheck is changed to skip pg_upgrade.
Author: Michael Paquier
Reviewed-by: Andrew Dunstan, Andres Freund, Rachel Heaton, Tom Lane,
Discussion: https://postgr.es/m/YJ8xTmLQkotVLpN5@paquier.xyz
Add exec_assign_value, exec_eval_datum, and exec_cast_value
to the set of functions a PL/pgSQL debugger plugin can
conveniently call. This allows more convenient manipulation
of the values of PL/pgSQL function variables.
Pavel Stehule, reviewed by Aleksander Alekseev and myself
Discussion: https://postgr.es/m/CAFj8pRD+dBPU0T-KrkP7ef6QNPDEsjYCejEsBe07NDq8TybOkA@mail.gmail.com
This patch is extracted from a larger patch that allowed setting the
default returned value from these functions to json or jsonb. That had
problems, but this piece of it is fine. For these functions only json or
jsonb can be specified in the RETURNING clause.
Extracted from an original patch from Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
postgres_fdw would push ORDER BY clauses to the remote side without
verifying that the sort operator is safe to ship. Moreover, it failed
to print a suitable USING clause if the sort operator isn't default
for the sort expression's type. The net result of this is that the
remote sort might not have anywhere near the semantics we expect,
which'd be disastrous for locally-performed merge joins in particular.
We addressed similar issues in the context of ORDER BY within an
aggregate function call in commit 7012b132d, but failed to notice
that query-level ORDER BY was broken. Thus, much of the necessary
logic already existed, but it requires refactoring to be usable
in both cases.
Back-patch to all supported branches. In HEAD only, remove the
core code's copy of find_em_expr_for_rel, which is no longer used
and really should never have been pushed into equivclass.c in the
first place.
Ronan Dunklau, per report from David Rowley;
reviews by David Rowley, Ranier Vilela, and myself
Discussion: https://postgr.es/m/CAApHDvr4OeC2DBVY--zVP83-K=bYrTD7F8SZDhN4g+pj2f2S-A@mail.gmail.com
When testing check-world it's hard to know what the test the test failure
output belongs to. The tap test output is especially problematic, partially
due to our practice of reusing test names like 001_basic.pl.
This isn't a real issue on the buildfarm, which invokes tests separately, but
locally and for CI it's quite annoying.
To fix, the test target provisos in Makefile.global.in now output
echo "+++ (regress|isolation|tap) [install-]check in $(subdir) +++"
before running the tests.
Discussion: https://postgr.es/m/20220330165039.3zseuiraxfjkksf5@alap3.anarazel.de
Commit fb16d2c658 used the old but not quite old enough parent module,
which dates to perl version 5.10.1 as a core module. We still have a
dinosaur or two running older versions of perl, so rather than require
an upgrade in those we simply do in place what parent.pm's import()
would have done for us.
Reviewed by Tom Lane
Discussion: https://postgr.es/m/474104.1648685981@sss.pgh.pa.us
This breaks out the fetch-it-all-and-print case in SendQuery() into a
separate function. This makes the code more similar to the other
cases \gdesc and run query with FETCH_COUNT, and makes SendQuery()
itself a bit smaller.
Extracted from a larger patch with more changes in this area to
follow.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
When we create or alter a subscription to add publications raise a warning
for non-existent publications. We don't want to give an error here because
it is possible that users can later create the missing publications.
Author: Vignesh C
Reviewed-by: Bharath Rupireddy, Japin Li, Dilip Kumar, Euler Taveira, Ashutosh Sharma, Amit Kapila
Discussion: https://postgr.es/m/CALDaNm0f4YujGW+q-Di0CbZpnQKFFrXntikaQQKuEmGG0=Zw=Q@mail.gmail.com
Compression with gzip has never been supported in the tar format of
pg_dump since this code has been introduced in c3e18804, as the use of
buffered I/O in gzdopen() changes the file positioning that tar
requires. The original idea behind the use of compression with the tar
mode is to be able to include compressed data files (named %u.dat.gz)
and blob files (blob_%u.dat.gz) in the tarball generated by the dump,
with toc.dat, that tracks down if compression is used in the dump,
always uncompressed.
Note that this commit removes the dump part of the code as well as the
restore part, removing any dependency to zlib in pg_backup_tar.c. There
could be an argument behind keeping around the restore part, but this
would require one to change the internals of a tarball previously dumped
so as data and blob files are compressed with toc.dat itself changed to
track down if compression is enabled. However, the argument about
gzdopen() still holds in the read case with pg_restore.
Removing this code simplifies future additions related to compression in
pg_dump.
Author: Georgios Kokolatos, Rachel Heaton
Discussion: https://postgr.es/m/faUNEOpts9vunEaLnmxmG-DldLSg_ql137OC3JYDmgrOMHm1RvvWY2IdBkv_CRxm5spCCb_OmKNk2T03TMm0fBEWveFF9wA1WizPuAgB7Ss=@protonmail.com
When evaluating a query with a multi-column GROUP BY clause using sort,
the cost may be heavily dependent on the order in which the keys are
compared when building the groups. Grouping does not imply any ordering,
so we're allowed to compare the keys in arbitrary order, and a Hash Agg
leverages this. But for Group Agg, we simply compared keys in the order
as specified in the query. This commit explores alternative ordering of
the keys, trying to find a cheaper one.
In principle, we might generate grouping paths for all permutations of
the keys, and leave the rest to the optimizer. But that might get very
expensive, so we try to pick only a couple interesting orderings based
on both local and global information.
When planning the grouping path, we explore statistics (number of
distinct values, cost of the comparison function) for the keys and
reorder them to minimize comparison costs. Intuitively, it may be better
to perform more expensive comparisons (for complex data types etc.)
last, because maybe the cheaper comparisons will be enough. Similarly,
the higher the cardinality of a key, the lower the probability we’ll
need to compare more keys. The patch generates and costs various
orderings, picking the cheapest ones.
The ordering of group keys may interact with other parts of the query,
some of which may not be known while planning the grouping. E.g. there
may be an explicit ORDER BY clause, or some other ordering-dependent
operation, higher up in the query, and using the same ordering may allow
using either incremental sort or even eliminate the sort entirely.
The patch generates orderings and picks those minimizing the comparison
cost (for various pathkeys), and then adds orderings that might be
useful for operations higher up in the plan (ORDER BY, etc.). Finally,
it always keeps the ordering specified in the query, on the assumption
the user might have additional insights.
This introduces a new GUC enable_group_by_reordering, so that the
optimization may be disabled if needed.
The original patch was proposed by Teodor Sigaev, and later improved and
reworked by Dmitry Dolgov. Reviews by a number of people, including me,
Andrey Lepikhov, Claudio Freire, Ibrar Ahmed and Zhihong Yu.
Author: Dmitry Dolgov, Teodor Sigaev, Tomas Vondra
Reviewed-by: Tomas Vondra, Andrey Lepikhov, Claudio Freire, Ibrar Ahmed, Zhihong Yu
Discussion: https://postgr.es/m/7c79e6a5-8597-74e8-0671-1c39d124c9d6%40sigaev.ru
Discussion: https://postgr.es/m/CA%2Bq6zcW_4o2NC0zutLkOJPsFt80megSpX_dVRo6GK9PC-Jx_Ag%40mail.gmail.com
This Patch introduces three SQL standard JSON functions:
JSON() (incorrectly mentioned in my commit message for f4fb45d15c)
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values, and
has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value, including
json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis or
represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
We do this via a subclass for any branch older than the minimum known
to be compatible with the main package (currently release 12).
This should be useful for constructing cross-version tests.
In theory this could be extended back any number of versions, with
varying degrees of compatibility.
Reviewed by Michael Paquier and Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/a3efd19a-d5c9-fdf2-6094-4cde056a2708@dunslane.net
libzstd allows transparent parallel compression just by setting
an option when creating the compression context, so permit that
for both client and server-side backup compression. To use this,
use something like pg_basebackup --compress WHERE-zstd:workers=N
where WHERE is "client" or "server" and N is an integer.
When compression is performed on the server side, this will spawn
threads inside the PostgreSQL backend. While there is almost no
PostgreSQL server code which is thread-safe, the threads here are used
internally by libzstd and touch only data structures controlled by
libzstd.
Patch by me, based in part on earlier work by Dipesh Pandit
and Jeevan Ladhe. Reviewed by Justin Pryzby.
Discussion: http://postgr.es/m/CA+Tgmobj6u-nWF-j=FemygUhobhryLxf9h-wJN7W-2rSsseHNA@mail.gmail.com
COPY FROM supports the HEADER option to silently discard the header
line from a CSV or text file. It is possible to load by mistake a
file that matches the expected format, for example, if two text
columns have been swapped, resulting in garbage in the database.
This adds a new option value HEADER MATCH that checks the column names
in the header line against the actual column names and errors out if
they do not match.
Author: Rémi Lapeyre <remi.lapeyre@lenstra.fr>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CAF1-J-0PtCWMeLtswwGV2M70U26n4g33gpe1rcKQqe6wVQDrFA@mail.gmail.com
The current logical replication behavior is to send every transaction to
subscriber even if the transaction is empty. This can happen because
transaction doesn't contain changes from the selected publications or all
the changes got filtered. It is a waste of CPU cycles and network
bandwidth to build/transmit these empty transactions.
This patch addresses the above problem by postponing the BEGIN message
until the first change is sent. While processing a COMMIT message, if
there was no other change for that transaction, do not send the COMMIT
message. This allows us to skip sending BEGIN/COMMIT messages for empty
transactions.
When skipping empty transactions in synchronous replication mode, we send
a keepalive message to avoid delaying such transactions.
Author: Ajin Cherian, Hou Zhijie, Euler Taveira
Reviewed-by: Peter Smith, Takamichi Osumi, Shi Yu, Masahiko Sawada, Greg Nancarrow, Vignesh C, Amit Kapila
Discussion: https://postgr.es/m/CAMkU=1yohp9-dv48FLoSPrMqYEyyS5ZWkaZGD41RJr10xiNo_Q@mail.gmail.com
Curently, some TAP test that directly call the underlying function
PostgreSQL::Test::Utils::run_log() care about the return value, but
none of those that call it via PostgreSQL::Test::Cluster::run_log() care.
However, I'd like to add a test that will care, so adjust this function
to return whatever it gets back from the underlying function, just as
we do for a number of other functions in this module.
Discussion: http://postgr.es/m/CA+Tgmobj6u-nWF-j=FemygUhobhryLxf9h-wJN7W-2rSsseHNA@mail.gmail.com
This introduces the SQL/JSON functions for querying JSON data using
jsonpath expressions. The functions are:
JSON_EXISTS()
JSON_QUERY()
JSON_VALUE()
All of these functions only operate on jsonb. The workaround for now is
to cast the argument to jsonb.
JSON_EXISTS() tests if the jsonpath expression applied to the jsonb
value yields any values. JSON_VALUE() must return a single value, and an
error occurs if it tries to return multiple values. JSON_QUERY() must
return a json object or array, and there are various WRAPPER options for
handling scalar or multi-value results. Both these functions have
options for handling EMPTY and ERROR conditions.
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Linux thinks that something like "createdb foo -S bar" is perfectly
fine, but Windows wants the options to precede any bare arguments, so
we must write "createdb -S bar foo" for portability.
Per reports from CI, the buildfarm, and Andres.
Discussion: http://postgr.es/m/20220329173536.7d2ywdatsprxl4x6@alap3.anarazel.de
Because this strategy logs changes on a block-by-block basis, it
avoids the need to checkpoint before and after the operation.
However, because it logs each changed block individually, it might
generate a lot of extra write-ahead logging if the template database
is large. Therefore, the older strategy remains available via a new
STRATEGY parameter to CREATE DATABASE, and a corresponding --strategy
option to createdb.
Somewhat controversially, this patch assembles the list of relations
to be copied to the new database by reading the pg_class relation of
the template database. Cross-database access like this isn't normally
possible, but it can be made to work here because there can't be any
connections to the database being copied, nor can it contain any
in-doubt transactions. Even so, we have to use lower-level interfaces
than normal, since the table scan and relcache interfaces will not
work for a database to which we're not connected. The advantage of
this approach is that we do not need to rely on the filesystem to
determine what ought to be copied, but instead on PostgreSQL's own
knowledge of the database structure. This avoids, for example,
copying stray files that happen to be located in the source database
directory.
Dilip Kumar, with a fairly large number of cosmetic changes by me.
Reviewed and tested by Ashutosh Sharma, Andres Freund, John Naylor,
Greg Nancarrow, Neha Sharma. Additional feedback from Bruce Momjian,
Heikki Linnakangas, Julien Rouhaud, Adam Brusselback, Kyotaro
Horiguchi, Tomas Vondra, Andrew Dunstan, Álvaro Herrera, and others.
Discussion: http://postgr.es/m/CA+TgmoYtcdxBjLh31DLxUXHxFVMPGzrU5_T=CYCvRyFHywSBUQ@mail.gmail.com
Currently, libpq client code must have a connection handle
before it can query the "library" SSL attribute. This poses
problems if the client needs to know what SSL library is in
use before constructing a connection string.
Allow PQsslAttribute(NULL, "library") to return the library
in use -- currently, just "OpenSSL" or NULL. The new behavior
is announced with the LIBPQ_HAS_SSL_LIBRARY_DETECTION feature
macro, allowing clients to differentiate between a libpq that
was compiled without SSL support and a libpq that's just too
old to tell.
Author: Jacob Champion <pchampion@vmware.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/4c8b76ef434a96627170a31c3acd33cbfd6e41f1.camel@vmware.com
This view is similar to pg_hba_file_rules view, except that it is
associated with the parsing of pg_ident.conf. Similarly to its cousin,
this view is useful to check via SQL if changes planned in pg_ident.conf
would work upon reload or restart, or to diagnose a previous failure.
Bumps catalog version.
Author: Julien Rouhaud
Reviewed-by: Aleksander Alekseev, Michael Paquier
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
The regression tests include a query to check the execution path of
pg_hba_file_rules, but it has never checked that a given cluster has
correct contents in pg_hba.conf. This commit extends the query of
pg_hba_file_rules to report any errors if anything bad is found. For
EXEC_BACKEND builds, any connection attempt would fail when loading
pg_hba.conf if any incorrect content is found when parsed, so a failure
would be detected before even running this query. However, this can
become handy for clusters where pg_hba.conf can be reloaded, where new
connection attempts are not subject to a fresh loading of pg_hba.conf.
Author: Julien Rouhaud, based on an idea from me
Discussion: https://postgr.es/m/YkFhpydhyeNNo3Xl@paquier.xyz
This patch intrdocuces the SQL standard IS JSON predicate. It operates
on text and bytea values representing JSON as well as on the json and
jsonb types. Each test has an IS and IS NOT variant. The tests are:
IS JSON [VALUE]
IS JSON ARRAY
IS JSON OBJECT
IS JSON SCALAR
IS JSON WITH | WITHOUT UNIQUE KEYS
These are mostly self-explanatory, but note that IS JSON WITHOUT UNIQUE
KEYS is true whenever IS JSON is true, and IS JSON WITH UNIQUE KEYS is
true whenever IS JSON is true except it IS JSON OBJECT is true and there
are duplicate keys (which is never the case when applied to jsonb values).
Nikita Glukhov
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Generally if a role is granted membership to another role with NOINHERIT
they must use SET ROLE to access the privileges of that role, however
with predefined roles the membership and privilege is conflated. Fix that
by replacing is_member_of_role with has_privs_for_role for predefined
roles. Patch does not remove is_member_of_role from acl.h, but it does
add a warning not to use that function for privilege checking. Not
backpatched based on hackers list discussion.
Author: Joshua Brindle
Reviewed-by: Stephen Frost, Nathan Bossart, Joe Conway
Discussion: https://postgr.es/m/flat/CAGB+Vh4Zv_TvKt2tv3QNS6tUM_F_9icmuj0zjywwcgVi4PAhFA@mail.gmail.com
Commit f9fd176461 effectively gave
every role ADMIN OPTION on itself. However, this appears to be
something that happened accidentally as a result of refactoring
work rather than an intentional decision. Almost a decade later,
it was discovered that this was a security vulnerability. As a
result, commit fea164a72a restricted
this implicit ADMIN OPTION privilege to be exercisable only when
the role being administered is the same as the session user and
when no security-restricted operation is in progress. That
commit also documented the existence of this implicit privilege
for what seems to be the first time.
The effect of the privilege is to allow a login role to grant
the privileges of that role, and optionally ADMIN OPTION on it,
to some other role. That's an unusual thing to do, because generally
membership is granted in roles used as groups, rather than roles
used as users. Therefore, it does not seem likely that removing
the privilege will break things for many PostgreSQL users.
However, it will make it easier to reason about the permissions
system. This is the only case where a user who has not been given any
special permission (superuser, or ADMIN OPTION on some role) can
modify role membership, so removing it makes things more consistent.
For example, if a superuser sets up role A and B and grants A to B
but no other privileges to anyone, she can now be sure that no one
else will be able to revoke that grant. Without this change, that
would have been true only if A was a non-login role.
Patch by me. Reviewed by Tom Lane and Stephen Frost.
Discussion: http://postgr.es/m/CA+Tgmoawdt03kbA+dNyBcNWJpRxu0f4X=69Y3+DkXXZqmwMDLg@mail.gmail.com
When we try to set the zstd compression level either on the client
or on the server, check for errors.
For any algorithm, on the client side, don't try to set the compression
level unless the user specified one. This was visibly broken for
zstd, which managed to set -1 rather than 0 in this case, but tidy
up the code for the other methods, too.
On the client side, if we fail to create a ZSTD_CCtx, exit after
reporting the error. Otherwise we'll dereference a null pointer.
Patch by me, reviewed by Dipesh Pandit.
Discussion: http://postgr.es/m/CA+TgmoZK3zLQUCGi1h4XZw4jHiAWtcACc+GsdJR1_Mc19jUjXA@mail.gmail.com
This has no in-core callers but will be wanted by extensions.
It's just a thin wrapper around get_query_def, so it adds little code.
Also, fix get_from_clause_item() to force insertion of an alias
for a SUBQUERY RTE item. This is irrelevant to existing uses because
RTE_SUBQUERY items made by the parser always have aliases already.
However, if one tried to use pg_get_querydef() to inspect a post-rewrite
Query, it could be an issue. In any case, get_from_clause_item already
contained logic to force alias insertion for VALUES items, so the lack
of the same for SUBQUERY is a pretty clear oversight.
In passing, replace duplicated code for selection of pretty-print
options with a common macro.
Julien Rouhaud, reviewed by Pavel Stehule, Gilles Darold, and myself
Discussion: https://postgr.es/m/20210627041138.zklczwmu3ms4ufnk@nol
Andres Freund
Tom Lane
Stephen Frost
Andrew Dunstan
Peter Eisentraut
Etsuro Fujita
Amit Kapila
Tatsuo Ishii
Daniel Gustafsson
Peter Geoghegan
Michael Paquier
Alvaro Herrera
Robert Haas
David Rowley
Thomas Munro
Joe Conway
John Naylor
Tomas Vondra