The new logging introduced in 35192f06 made the incorrect assumption
that scan_all vacuums would always wait for buffer pins; but they only
do so if the page actually needs to be frozen.
Fix that inaccuracy by removing the difference in log output based on
scan_all and just always remove the same message. I chose to keep the
split log message from the original commit for now, it seems likely
that it'll be of use in the future.
Also merge the line about buffer pins in autovacuum's log output into
the existing "pages: ..." line. It seems odd to have a separate line
about pins, without the "topic: " prefix others have.
Also rename the new 'pinned_pages' variable to 'pinskipped_pages'
because it actually tracks the number of pages that could *not* be
pinned.
Discussion: 20150104005324.GC9626@awork2.anarazel.de
The previous commit introduced its report at LOG level to avoid
surprises at minor release upgrade time. Compel users deploying the
next major release to also deploy the reported workaround.
Darwin --enable-nls builds use a substitute setlocale() that may start a
thread. Buildfarm member orangutan experienced BackendList corruption
on account of different postmaster threads executing signal handlers
simultaneously. Furthermore, a multithreaded postmaster risks undefined
behavior from sigprocmask() and fork(). Emit LOG messages about the
problem and its workaround. Back-patch to 9.0 (all supported versions).
Typical server invocations already achieved that. Invalid locale
settings in the initial postmaster environment interfered, as could
malloc() failure. Setting "LC_MESSAGES=pt_BR.utf8 LC_ALL=invalid" in
the postmaster environment will now choose C-locale messages, not
Brazilian Portuguese messages. Most localized programs, including all
PostgreSQL frontend executables, do likewise. Users are unlikely to
observe changes involving locale categories other than LC_MESSAGES.
CheckMyDatabase() ensures that we successfully set LC_COLLATE and
LC_CTYPE; main() sets the remaining three categories to locale "C",
which almost cannot fail. Back-patch to 9.0 (all supported versions).
vacuum()'s static variable handling makes it non-reentrant; an ensuing
null pointer deference crashed the backend. Back-patch to 9.0 (all
supported versions).
Since commit ba94518a, we used XLogFileOpen to open the next segment for
writing, but if the end-of-recovery happens exactly at a segment boundary,
the new segment might not exist yet. (Before ba94518a, XLogFileOpen was
correct, because we would open the previous segment if the switch happened
at the boundary.)
Instead of trying to create it if necessary, it's simpler to not bother
opening the segment at all. XLogWrite() will open or create it soon anyway,
after writing the checkpoint or end-of-recovery record.
Reported by Andres Freund.
Previously, the xml value resulting from an xpath query would not have
namespace declarations if the namespace declarations were attached to
an ancestor element in the input xml value. That means the output value
was not correct XML. Fix that by running the result value through
xmlCopyNode(), which produces the correct namespace declarations.
Author: Ali Akbar <the.apaan@gmail.com>
When using a historic snapshot for logical decoding it can validly
happen that a relation that's in the relcache isn't visible to that
historic snapshot. E.g. if a newly created relation is referenced in
the query that uses the SQL interface for logical decoding and a
sinval reset occurs.
The earlier commit that fixed the error handling for that corner case
already improves the situation as a ERROR is better than hitting an
assertion... But it's obviously not good enough. So additionally
allow that case without an error if a historic snapshot is set up -
that won't allow an invalid entry to stay in the cache because it's a)
already marked invalid and will thus be rebuilt during the next access
b) the syscaches will be reset at the end of decoding.
There might be prettier solutions to handle this case, but all that we
could think of so far end up being much more complex than this quite
simple fix.
This fixes the assertion failures reported by the buildfarm (markhor,
tick, leech) after the introduction of new regression tests in
89fd41b390. The failure there weren't actually directly caused by
CLOBBER_CACHE_ALWAYS but the extraordinary long runtimes due to it
lead to sinval resets triggering the behaviour.
Discussion: 22459.1418656530@sss.pgh.pa.us
Backpatch to 9.4 where logical decoding was introduced.
The corner case where a relcache invalidation tried to rebuild the
entry for a referenced relation but couldn't find it in the catalog
wasn't correct.
The code tried to RelationCacheDelete/RelationDestroyRelation the
entry. That didn't work when assertions are enabled because the latter
contains an assertion ensuring the refcount is zero. It's also more
generally a bad idea, because by virtue of being referenced somebody
might actually look at the entry, which is possible if the error is
trapped and handled via a subtransaction abort.
Instead just error out, without deleting the entry. As the entry is
marked invalid, the worst that can happen is that the invalid (and at
some point unused) entry lingers in the relcache.
Discussion: 22459.1418656530@sss.pgh.pa.us
There should be no way to hit this case < 9.4 where logical decoding
introduced a bug that can hit this. But since the code for handling
the corner case is there it should do something halfway sane, so
backpatch all the the way back. The logical decoding bug will be
handled in a separate commit.
This never worked, I think. Per report from Marc Munro.
In passing, fix funny spacing in the COMMENT ON command as a result of
excess space in the "label" string.
A oversight in 2c0a485896 causes 'could not create archive status file
"...": No such file or directory' errors in pg_receivexlog if the
target directory doesn't happen to contain a archive_status
directory. That's due to a stupidly left over 'true' constant instead
of mark_done being passed down to ProcessXLogDataMsg().
The bug is only present in the master branch, and luckily wasn't
released.
Spotted by Fujii Masao.
Commit 0e5680f473 contained a thinko
mixing LOCKMODE with LockTupleMode. This caused misbehavior in the case
where a tuple is marked with a multixact with at most a FOR SHARE lock,
and another transaction tries to acquire a FOR NO KEY EXCLUSIVE lock;
this case should block but doesn't.
Include a new isolation tester spec file to explicitely try all the
tuple lock combinations; without the fix it shows the problem:
starting permutation: s1_begin s1_lcksvpt s1_tuplock2 s2_tuplock3 s1_commit
step s1_begin: BEGIN;
step s1_lcksvpt: SELECT * FROM multixact_conflict FOR KEY SHARE; SAVEPOINT foo;
a
1
step s1_tuplock2: SELECT * FROM multixact_conflict FOR SHARE;
a
1
step s2_tuplock3: SELECT * FROM multixact_conflict FOR NO KEY UPDATE;
a
1
step s1_commit: COMMIT;
With the fixed code, step s2_tuplock3 blocks until session 1 commits,
which is the correct behavior.
All other cases behave correctly.
Backpatch to 9.3, like the commit that introduced the problem.
These calls are pretty much guaranteed not to fail unless something
has gone horribly wrong, and even in that case we'd just error out a
short time later. But since several code checkers complain about the
missing check it seems worthwile to fix it nonetheless.
Pointed out by Coverity.
As every error in mark_file_as_archived() will lead to a failure of
pg_basebackup the FD leak couldn't ever lead to a real problem. It
seems better to fix the leak anyway though, rather than silence
Coverity, as the usage of the function might get extended or copied at
some point in the future.
Pointed out by Coverity.
Backpatch to 9.2, like the relevant part of the previous patch.
WAL (and timeline history) files created by pg_basebackup did not
maintain the new base backup's archive status. That's currently not a
problem if the new node is used as a standby - but if that node is
promoted all still existing files can get archived again. With a high
wal_keep_segment settings that can happen a significant time later -
which is quite confusing.
Change both the backend (for the -x/-X fetch case) and pg_basebackup
(for -X stream) itself to always mark WAL/timeline files included in
the base backup as .done. That's in line with walreceiver.c doing so.
The verbosity of the pg_basebackup changes show pretty clearly that it
needs some refactoring, but that'd result in not be backpatchable
changes.
Backpatch to 9.1 where pg_basebackup was introduced.
Discussion: 20141205002854.GE21964@awork2.anarazel.de
Backpatch to 9.3 where src/common was introduce, because a bugfix that
needs to be backpatched, requires the function. Earlier branches will
have to duplicate the code.
At one point in the development of this feature, it was claimed that
allowing negative values would be useful to compensate for timezone
differences between master and slave servers. That was based on a mistaken
assumption that commit timestamps are recorded in local time; but of course
they're in UTC. Nor is a negative apply delay likely to be a sane way of
coping with server clock skew. However, the committed patch still treated
negative delays as doing something, and the timezone misapprehension
survived in the user documentation as well.
If recovery_min_apply_delay were a proper GUC we'd just set the minimum
allowed value to be zero; but for the moment it seems better to treat
negative settings as if they were zero.
In passing do some extra wordsmithing on the parameter's documentation,
including correcting a second misstatement that the parameter affects
processing of Restore Point records.
Issue noted by Michael Paquier, who also provided the code patch; doc
changes by me. Back-patch to 9.4 where the feature was introduced.
The short-lived event trigger in the rowsecurity test causes irreproducible
failures when the concurrent tests do something that the event trigger
can't cope with. Per buildfarm.
This might help us debug what's happening on some buildfarm members.
In passing, reduce the message from ereport to elog --- it doesn't seem
like this should be a user-facing case, so not worth translating.
For simple boolean variables such as ON_ERROR_STOP, psql has for a long
time recognized variant spellings of "on" and "off" (such as "1"/"0"),
and it also made a point of warning you if you'd misspelled the setting.
But these conveniences did not exist for other keyword-valued variables.
In particular, though ECHO_HIDDEN and ON_ERROR_ROLLBACK include "on" and
"off" as possible values, none of the alternative spellings for those were
recognized; and to make matters worse the code would just silently assume
"on" was meant for any unrecognized spelling. Several people have reported
getting bitten by this, so let's fix it. In detail, this patch:
* Allows all spellings recognized by ParseVariableBool() for ECHO_HIDDEN
and ON_ERROR_ROLLBACK.
* Reports a warning for unrecognized values for COMP_KEYWORD_CASE, ECHO,
ECHO_HIDDEN, HISTCONTROL, ON_ERROR_ROLLBACK, and VERBOSITY.
* Recognizes all values for all these variables case-insensitively;
previously there was a mishmash of case-sensitive and case-insensitive
behaviors.
Back-patch to all supported branches. There is a small risk of breaking
existing scripts that were accidentally failing to malfunction; but the
consensus is that the chance of detecting real problems and preventing
future mistakes outweighs this.
The one for the OCLASS_COLLATION case was noticed by
CLOBBER_CACHE_ALWAYS buildfarm members; the others I spotted by manual
code inspection.
Also remove a redundant check.
These columns can be passed to pg_get_object_address() and used to
reconstruct the dropped objects identities in a remote server containing
similar objects, so that the drop can be replicated.
Reviewed by Stephen Frost, Heikki Linnakangas, Abhijit Menon-Sen, Andres
Freund.
This function returns object type and objname/objargs arrays, which can
be passed to pg_get_object_address. This is especially useful because
the textual representation can be copied to a remote server in order to
obtain the corresponding OID-based address. In essence, this function
is the inverse of recently added pg_get_object_address().
Catalog version bumped due to the addition of the new function.
Also add docs to pg_get_object_address.
In COMMENT, DROP, SECURITY LABEL, and the new pg_get_object_address
function, we were representing types as a list of names, same as other
objects; but types are special objects that require their own
representation to be totally accurate. In the original COMMENT code we
had a note about fixing it which was lost in the course of c10575ff00.
Change all those places to use TypeName instead, as suggested by that
comment.
Right now the original coding doesn't cause any bugs, so no backpatch.
It is more problematic for proposed future code that operate with object
addresses from the SQL interface; type details such as array-ness are
lost when working with the degraded representation.
Thanks to Petr Jelínek and Dimitri Fontaine for offlist help on finding
a solution to a shift/reduce grammar conflict.
Commit 36a35c55 changed the divisor from 3 to 6, for no apparent reason.
Reducing GinMaxItemSize like that created a dump/reload hazard: loading a
9.3 database to 9.4 might fail with "index row size XXX exceeds maximum 1352
for index ..." error. Revert the change.
While we're at it, make the calculation slightly more accurate. It used to
divide the available space on page by three, then subtract
sizeof(ItemIdData), and finally round down. That's not totally accurate; the
item pointers for the three items are packed tight right after the page
header, but there is alignment padding after the item pointers. Change the
calculation to reflect that, like BTMaxItemSize does. I tested this with
different block sizes on systems with 4- and 8-byte alignment, and the value
after the final MAXALIGN_DOWN was the same with both methods on all
configurations. So this does not make any difference currently, but let's be
tidy.
Also add a comment explaining what the macro does.
This fixes bug #12292 reported by Robert Thaler. Backpatch to 9.4, where the
bug was introduced.
It is causing trouble when run in parallel mode, because dropping the
function other sessions are running concurrently causes them to fail due
to inability to find the function.
Per buildfarm, as noted by Tom Lane.
We were trying to acquire the lock even when we were subsequently
not sleeping in some other transaction, which opens us up unnecessarily
to deadlocks. In particular, this is troublesome if an update tries to
lock an updated version of a tuple and finds itself doing EvalPlanQual
update chain walking; more than two sessions doing this concurrently
will find themselves sleeping on each other because the HW tuple lock
acquisition in heap_lock_tuple called from EvalPlanQualFetch races with
the same tuple lock being acquired in heap_update -- one of these
sessions sleeps on the other one to finish while holding the tuple lock,
and the other one sleeps on the tuple lock.
Per trouble report from Andrew Sackville-West in
http://www.postgresql.org/message-id/20140731233051.GN17765@andrew-ThinkPad-X230
His scenario can be simplified down to a relatively simple
isolationtester spec file which I don't include in this commit; the
reason is that the current isolationtester is not able to deal with more
than one blocked session concurrently and it blocks instead of raising
the expected deadlock. In the future, if we improve isolationtester, it
would be good to include the spec file in the isolation schedule. I
posted it in
http://www.postgresql.org/message-id/20141212205254.GC1768@alvh.no-ip.org
Hat tip to Mark Kirkwood, who helped diagnose the trouble.
Windows versions later than Windows Server 2003 map "localhost" to ::1.
Account for that in the generated pg_hba.conf, fixing another oversight
in commit f6dc6dd5ba. Back-patch to 9.0,
like that commit.
David Rowley and Noah Misch
This reverts commit 60838df922.
That change needs a bit more thought to be workable. In view of
the potentially machine-dependent stuff that went in today,
we need all of the buildfarm to be testing those other changes.
StrategyGetBuffer() has proven to be a bottleneck in a number of
buffer acquisition heavy workloads. To some degree this has already
been alleviated by 5d7962c6, but it still can be quite a heavy
bottleneck. The problem is that in unfortunate usage patterns a
single StrategyGetBuffer() call will have to look at a large number of
buffers - in turn making it likely that the process will be put to
sleep while still holding the spinlock.
Replace most of the usage of the buffer_strategy_lock spinlock for the
clock sweep by a atomic nextVictimBuffer variable. That variable,
modulo NBuffers, is the current hand of the clock sweep. The buffer
clock-sweep then only needs to acquire the spinlock after a
wraparound. And even then only in the process that did the wrapping
around. That alleviates nearly all the contention on the relevant
spinlock, although significant contention on the cacheline can still
exist.
Reviewed-By: Robert Haas and Amit Kapila
Discussion: 20141010160020.GG6670@alap3.anarazel.de,
20141027133218.GA2639@awork2.anarazel.de
The old LWLock implementation had the problem that concurrent lock
acquisitions required exclusively acquiring a spinlock. Often that
could lead to acquirers waiting behind the spinlock, even if the
actual LWLock was free.
The new implementation doesn't acquire the spinlock when acquiring the
lock itself. Instead the new atomic operations are used to atomically
manipulate the state. Only the waitqueue, used solely in the slow
path, is still protected by the spinlock. Check lwlock.c's header for
an explanation about the used algorithm.
For some common workloads on larger machines this can yield
significant performance improvements. Particularly in read mostly
workloads.
Reviewed-By: Amit Kapila and Robert Haas
Author: Andres Freund
Discussion: 20130926225545.GB26663@awork2.anarazel.de
Besides being shorter and much easier to read it changes the logic in
LWLockRelease() to release all shared lockers when waking up any. This
can yield some significant performance improvements - and the fairness
isn't really much worse than before, as we always allowed new shared
lockers to jump the queue.
Hiding context messages usually is not a good idea - except for rather
verbose debugging/development utensils like LOG_DEBUG. There the
amount of repeated context messages just bloat the log without adding
information.
Exposing compression and decompression APIs of pglz makes possible its
use by extensions and contrib modules. pglz_decompress contained a call
to elog to emit an error message in case of corrupted data. This function
is changed to return a status code to let its callers return an error instead.
This commit is required for upcoming WAL compression feature so that
the WAL reader facility can decompress the WAL data by using pglz_decompress.
Michael Paquier
For some reason this seems to have been missed when the lists in
src/timezone/tznames/ were first constructed. We can't put it in Default
because of the conflict with US CST, but we should certainly list it among
the alternative entries in Asia.txt. (I checked for other oversights, but
all the other abbreviations that are in current use according to the IANA
files seem to be accounted for.) Noted while responding to bug #12326.
This reverts commit 1826987a46.
The overall design was deemed unacceptable, in discussion following the
previous commit message; we might find some parts of it still
salvageable, but I don't want to be on the hook for fixing it, so let's
wait until we have a new patch.
This allows access to get_object_address from SQL, which is useful to
obtain OID addressing information from data equivalent to that emitted
by the parser. This is necessary infrastructure of a project to let
replication systems propagate object dropping events to remote servers,
where the schema might be different than the server originating the
DROP.
This patch also adds support for OBJECT_DEFAULT to get_object_address;
that is, it is now possible to refer to a column's default value.
Catalog version bumped due to the new function.
Reviewed by Stephen Frost, Heikki Linnakangas, Robert Haas, Andres
Freund, Abhijit Menon-Sen, Adam Brightwell.
The previous representation using a boolean column for each attribute
would not scale as well as we want to add further attributes.
Extra auxilliary functions are added to go along with this change, to
make up for the lost convenience of access of the old representation.
Catalog version bumped due to change in catalogs and the new functions.
Author: Adam Brightwell, minor tweaks by Álvaro
Reviewed by: Stephen Frost, Andres Freund, Álvaro Herrera
Apart from enabling comments on domain constraints, this enables a
future project to replicate object dropping to remote servers: with the
current mechanism there's no way to distinguish between the two types of
constraints, so there's no way to know what to drop.
Also added support for the domain constraint comments in psql's \dd and
pg_dump.
Catalog version bumped due to the change in ObjectType enum.
This allows it to be used with ALTER ROLE SET.
Although the old setting of PGC_BACKEND prevented changes after session
start, after discussion it was more useful to allow ALTER ROLE SET
instead and just document that changes during a session have no effect.
This is similar to how session_preload_libraries works already.
An alternative would be to change things to allow PGC_BACKEND and
PGC_SU_BACKEND settings to be changed by ALTER ROLE SET. But that might
need further research (e.g., log_connections would probably not work).
based on patch by Kyotaro Horiguchi
This performs slightly better, uses less memory, and needs slightly less
code in GiST, than the Red-Black tree previously used.
Reviewed by Peter Geoghegan
XLogFileInit() returns a file descriptor, which needs to be closed. The leak
was short-lived, since the startup process exits shortly afterwards, but it
was clearly a bug, nevertheless.
Per Coverity report.
Add "normal" and "original" flags as output columns to the
pg_event_trigger_dropped_objects() function. With this it's possible to
distinguish which objects, among those listed, need to be explicitely
referenced when trying to replicate a deletion.
This is necessary so that the list of objects can be pruned to the
minimum necessary to replicate the DROP command in a remote server that
might have slightly different schema (for instance, TOAST tables and
constraints with different names and such.)
Catalog version bumped due to change of function definition.
Reviewed by: Abhijit Menon-Sen, Stephen Frost, Heikki Linnakangas,
Robert Haas.
We used time(null) to set a TimestampTz field, which gave bogus results.
Noticed while looking at pg_xlogdump output.
Backpatch to 9.3 and above, where the fast promotion was introduced.
In LWLockRelease() (and in 9.4+ LWLockUpdateVar()) we release enqueued
waiters using PGSemaphoreUnlock(). As there are other sources of such
unlocks backends only wake up if MyProc->lwWaiting is set to false;
which is only done in the aforementioned functions.
Before this commit there were dangers because the store to lwWaitLink
could become visible before the store to lwWaitLink. This could both
happen due to compiler reordering (on most compilers) and on some
platforms due to the CPU reordering stores.
The possible consequence of this is that a backend stops waiting
before lwWaitLink is set to NULL. If that backend then tries to
acquire another lock and has to wait there the list could become
corrupted once the lwWaitLink store is finally performed.
Add a write memory barrier to prevent that issue.
Unfortunately the barrier support has been only added in 9.2. Given
that the issue has not knowingly been observed in praxis it seems
sufficient to prohibit compiler reordering using volatile for 9.0 and
9.1. Actual problems due to compiler reordering are more likely
anyway.
Discussion: 20140210134625.GA15246@awork2.anarazel.de
Author: Jim Nasby, some kibitzing by Heikki Linnankangas.
Discussion leading to current behavior and precise wording fueled by
thoughts from Robert Haas and Andres Freund.
Previously, if you wanted anything besides C-string hash keys, you had to
specify a custom hashing function to hash_create(). Nearly all such
callers were specifying tag_hash or oid_hash; which is tedious, and rather
error-prone, since a caller could easily miss the opportunity to optimize
by using hash_uint32 when appropriate. Replace this with a design whereby
callers using simple binary-data keys just specify HASH_BLOBS and don't
need to mess with specific support functions. hash_create() itself will
take care of optimizing when the key size is four bytes.
This nets out saving a few hundred bytes of code space, and offers
a measurable performance improvement in tidbitmap.c (which was not
exploiting the opportunity to use hash_uint32 for its 4-byte keys).
There might be some wins elsewhere too, I didn't analyze closely.
In future we could look into offering a similar optimized hashing function
for 8-byte keys. Under this design that could be done in a centralized
and machine-independent fashion, whereas getting it right for keys of
platform-dependent sizes would've been notationally painful before.
For the moment, the old way still works fine, so as not to break source
code compatibility for loadable modules. Eventually we might want to
remove tag_hash and friends from the exported API altogether, since there's
no real need for them to be explicitly referenced from outside dynahash.c.
Teodor Sigaev and Tom Lane
Two changes:
1. When copying a WAL segment from old timeline to create the first segment
on the new timeline, only copy up to the point where the timeline switch
happens, and zero-fill the rest. This avoids corner cases where we might
think that the copied WAL from the previous timeline belong to the new
timeline.
2. If the timeline switch happens at a segment boundary, don't copy the
whole old segment to the new timeline. It's pointless, because it's 100%
identical to the old segment.
st_changecount protocol needs the memory barriers to ensure that
the apparent order of execution is as it desires. Otherwise,
for example, the CPU might rearrange the code so that st_changecount
is incremented twice before the modification on a machine with
weak memory ordering. This surprising result can lead to bugs.
This commit introduces the macros to load and store st_changecount
with the memory barriers. These are called before and after
PgBackendStatus entries are modified or copied into private memory,
in order to prevent CPU from reordering PgBackendStatus access.
Per discussion on pgsql-hackers, we decided not to back-patch this
to 9.4 or before until we get an actual bug report about this.
Patch by me. Review by Robert Haas.
In generate_series_step_numeric(), the variables "start_num"
and "stop_num" may be potentially freed until the next call.
So they should be put in the location which can survive across calls.
But previously they were not, and which could cause incorrect
behavior of generate_series(numeric, numeric). This commit fixes
this problem by copying them on multi_call_memory_ctx.
Andrew Gierth
Back-patch to 9.0 (all supported versions). This is mere
future-proofing in the context of the master branch, but commit
f6dc6dd5ba requires it of older branches.
When starting up from a basebackup taken off a standby extra logic has
to be applied to compute the point where the data directory is
consistent. Normal base backups use a WAL record for that purpose, but
that isn't possible on a standby.
That logic had a error check ensuring that the cluster's control file
indicates being in recovery. Unfortunately that check was too strict,
disregarding the fact that the control file could also indicate that
the cluster was shut down while in recovery.
That's possible when the a cluster starting from a basebackup is shut
down before the backup label has been removed. When everything goes
well that's a short window, but when either restore_command or
primary_conninfo isn't configured correctly the window can get much
wider. That's because inbetween reading and unlinking the label we
restore the last checkpoint from WAL which can need additional WAL.
To fix simply also allow starting when the control file indicates
"shutdown in recovery". There's nicer fixes imaginable, but they'd be
more invasive.
Backpatch to 9.2 where support for taking basebackups from standbys
was added.
Use SSPI authentication to allow connections exclusively from the OS
user that launched the test suite. This closes on Windows the
vulnerability that commit be76a6d39e
closed on other platforms. Users of "make installcheck" or custom test
harnesses can run "pg_regress --config-auth=DATADIR" to activate the
same authentication configuration that "make check" would use.
Back-patch to 9.0 (all supported versions).
Security: CVE-2014-0067
As with NOT NULL constraints, we consider that such constraints are merely
reports of constraints that are being enforced by the remote server (or
other underlying storage mechanism). Their only real use is to allow
planner optimizations, for example in constraint-exclusion checks. Thus,
the code changes here amount to little more than removal of the error that
was formerly thrown for applying CHECK to a foreign table.
(In passing, do a bit of cleanup of the ALTER FOREIGN TABLE reference page,
which had accumulated some weird decisions about ordering etc.)
Shigeru Hanada and Etsuro Fujita, reviewed by Kyotaro Horiguchi and
Ashutosh Bapat.
The old pattern would match files with strange extensions like *.ry or
*.lpp. Refactor it to only include files with known extensions, and to make
it more readable.
Per Andrew Dunstan's suggestion.
MapArrayTypeName would copy up to NAMEDATALEN-1 bytes of the base type
name, which of course is wrong: after prepending '_' there is only room for
NAMEDATALEN-2 bytes. Aside from being the wrong result, this case would
lead to overrunning the statically allocated work buffer. This would be a
security bug if the function were ever used outside bootstrap mode, but it
isn't, at least not in any currently supported branches.
Aside from fixing the off-by-one loop logic, this patch gets rid of the
static work buffer by having MapArrayTypeName pstrdup its result; the sole
caller was already doing that, so this just requires moving the pstrdup
call. This saves a few bytes but mainly it makes the API a lot cleaner.
Back-patch on the off chance that there is some third-party code using
MapArrayTypeName with less-secure input. Pushing pstrdup into the function
should not cause any serious problems for such hypothetical code; at worst
there might be a short term memory leak.
Per Coverity scanning.
Mostly these issues concern the non-use of function results. These
have been changed to use (void) pushJsonbValue(...) instead of assigning
the result to a variable that gets overwritten before it is used.
There is a larger issue that we should possibly examine the API for
pushJsonbValue(), so that instead of returning a value it modifies a
state argument. The current idiom is rather clumsy. However, changing
that requires quite a bit more work, so this change should do for the
moment.
The code for advancing through the input rows overlooked the case that we
might already be past the first row of the row pair now being considered,
in case the previous percentile also fell between the same two input rows.
Report and patch by Andrew Gierth; logic rewritten a bit for clarity by me.
The planner seems to like to do this join query as a hash join, making
the output ordering machine-dependent; worse, it's a hash on OIDs, so
that it's a bit astonishing that the result doesn't change from run to
run even on one machine. Add an ORDER BY to get consistent results.
Per buildfarm.
I also suppressed output from the final DROP SCHEMA CASCADE, to avoid
occasional failures similar to those fixed in commit 81d815dc3e.
That hasn't been observed in the buildfarm yet, but it seems likely
to happen in future if we leave it as-is.
The functions are:
to_jsonb()
jsonb_object()
jsonb_build_object()
jsonb_build_array()
jsonb_agg()
jsonb_object_agg()
Also along the way some better logic is implemented in
json_categorize_type() to match that in the newly implemented
jsonb_categorize_type().
Andrew Dunstan, reviewed by Pavel Stehule and Alvaro Herrera.
The functions remove object fields, including in nested objects, that
have null as a value. In certain cases this can lead to considerably
smaller datums, with no loss of semantic information.
Andrew Dunstan, reviewed by Pavel Stehule.