Temporary replication slots will be used by default when wal streaming
is used and no slot name is specified with -S. If a slot name is
specified, then a permanent slot with that name is used. If --no-slot is
specified, then no permanent or temporary slot will be used.
Temporary slots are only used on 10.0 and newer, of course.
The different actions in pg_ctl had different defaults for -w and -W,
mostly for historical reasons. Most users will want the -w behavior, so
make that the default.
Remove the -w option in most example and test code, so avoid confusion
and reduce verbosity. pg_upgrade is not touched, so it can continue to
work with older installations.
Reviewed-by: Beena Emerson <memissemerson@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
Various example and test code used -m fast explicitly, but since it's
the default, this can be omitted now or should be replaced by a better
example.
pg_upgrade is not touched, so it can continue to operate with older
installations.
In 9.5, the default pg_ctl stop mode was changed from "smart" to "fast".
pg_upgrade still thought the default mode was "smart" and only specified
the mode when "fast" was asked for. This results in using "fast" all
the time. It's not clear what the effect in practice is, but fix it
nonetheless to restore the previous behavior.
pg_restore will currently accept invalid values for the number of
parallel jobs to run (eg: -1), unlike pg_dump which does check that the
value provided is reasonable.
Worse, '-1' is actually a valid, independent, parameter (as an alias for
--single-transaction), leading to potentially completely unexpected
results from a command line such as:
-> pg_restore -j -1
Where a user would get neither parallel jobs nor a single-transaction.
Add in validity checking of the parallel jobs option, as we already have
in pg_dump, before we try to open up the archive. Also move the check
that we haven't been asked to run more parallel jobs than possible on
Windows to the same place, so we do all the option validity checking
before opening the archive.
Back-patch all the way, though for 9.2 we're adding the Windows-specific
check against MAXIMUM_WAIT_OBJECTS as that check wasn't back-patched
originally.
Discussion: https://www.postgresql.org/message-id/20170110044815.GC18360%40tamriel.snowman.net
The previous --path documentation and --help output were wrong in both
its meaning and the defaults.
Reviewed-by: Michael Paquier
Backpatch-through: 9.6
When using pg_dump --strict-names and a schema pattern which doesn't
match any schemas (eg: --schema='nonexistant*'), we were incorrectly
throwing an error claiming no tables were found when, really, there
were no schemas found:
-> pg_dump --strict-names --schema='nonexistant*'
pg_dump: no matching tables were found for pattern "nonexistant*"
Fix that by changing the error message to say 'schemas' instead, since
that is what we are actually complaining about.
Noticed while testing pg_dump error cases.
Back-patch to 9.6 where --strict-names and this error message were
introduced.
Including the program name twice is not helpful:
-> pg_dump -j -1
pg_dump: pg_dump: invalid number of parallel jobs
Correct by removing the progname from the exit_horribly() call used when
validating the number of parallel jobs.
Noticed while testing various pg_dump error cases.
Back-patch to 9.3 where parallel pg_dump was added.
For reasons unknown, pg_dumpall and pg_restore managed to escape the
basic set of TAP tests that were added for pg_dump in 6bd356c3, so
let's get them added now. A few minor adjustments are also made to the
dump/restore tests to improve code coverage for pg_restore/pg_dumpall.
findTableByOid() is allowed to return NULL and we should therefore be
checking for that case. getOwnedSeqs() and dumpSequence() shouldn't
ever actually see this happen, but given odd circumstances it might and
commit f9e439b1 probably shouldn't have removed that check.
Pointed out by Coverity. Initial patch from Michael Paquier.
Back-patch to 9.6, where that commit had removed the check.
Allow pg_recvlogical to specify an ending LSN, complementing
the existing -—startpos=LSN option.
Craig Ringer, reviewed by Euler Taveira and Naoki Okano
Since streaming is now supported for all output formats, make this the
default as this is what most people want.
To get the old behavior, the parameter -X none can be specified to turn
it off.
This also removes the parameter -x for fetch, now requiring -X fetch to
be specified to use that.
Reviewed by Vladimir Rusinov, Michael Paquier and Simon Riggs
For aggregated logging, pg_bench supposed that printing the integer part of
INSTR_TIME_GET_DOUBLE() would produce a Unix timestamp. That was already
broken on Windows, and it's about to get broken on most other platforms as
well. As in commit 74baa1e3b, we can remove the entanglement at the price
of one extra syscall per transaction; though here it seems more convenient
to use time(NULL) instead of gettimeofday(), since we only need
integral-second precision.
I took the time to do some wordsmithing on the documentation about
pgbench's logging features, too.
Discussion: https://postgr.es/m/8837.1483216839@sss.pgh.pa.us
This code was presuming undue familiarity with the contents of the
instr_time struct. That was already broken on Windows, and it's about
to get broken on most other platforms as well. The simplest solution
that preserves the current output definition is to just do our own
gettimeofday() call here. Realistically, the extra cost is probably
negligible in comparison to everything else that's going on in a
pgbench transaction, so it's not worth sweating over.
On Windows, the precision delivered by gettimeofday() is lower than
one could wish, but this is still a big improvement over printing
zeroes, as the code did before.
Discussion: https://postgr.es/m/8837.1483216839@sss.pgh.pa.us
In 56c7d8d the behavior to keep .partial segments around
(considered corrupt) in case an connection failure occurs was
accidentally removed. This would lead to an incomplete segment
being considered complete.
Author: Michael Paquier
\crosstabview's complaint about multiple entries for the same crosstab
cell quoted the wrong row and/or column values. It would accidentally
appear to work if the data had been in strcmp() order to start with,
which probably explains how we missed noticing this during development.
This could be fixed in more than one way, but the way I chose was to
hang onto both result pointers from bsearch() and use those to get at
the value names.
In passing, avoid casting away const in the bsearch comparison functions.
No bug there, just poor style.
Per bug #14476 from Tomonari Katsumata. Back-patch to 9.6 where
\crosstabview was introduced.
Report: https://postgr.es/m/20161225021519.10139.45460@wrigleys.postgresql.org
The -v/--verbose option was not included in the output from --help for
pg_dumpall even though it's in the pg_dumpall documentation and has
apparently been around since pg_dumpall was reimplemented in C in 2002.
Fix that by adding it.
Pointed out by Daniel Westermann.
Back-patch to all supported branches.
Discussion: https://www.postgresql.org/message-id/2020970042.4589542.1482482101585.JavaMail.zimbra%40dbi-services.com
When providing tab completion for ALTER DEFAULT PRIVILEGES, we are
including the list of roles as possible options for completion after the
GRANT or REVOKE. Further, we accept FOR ROLE/IN SCHEMA at the same time
and in either order, but the tab completion was only working for one or
the other. Lastly, we weren't using the actual list of allowed kinds of
objects for default privileges for completion after the 'GRANT X ON' but
instead were completeing to what 'GRANT X ON' supports, which isn't the
ssame at all.
Address these issues by improving the forward tab-completion for ALTER
DEFAULT PRIVILEGES and then constrain and correct how the tail
completion is done when it is for ALTER DEFAULT PRIVILEGES.
Back-patch the forward/tail tab-completion to 9.6, where we made it easy
to handle such cases.
For 9.5 and earlier, correct the initial tab-completion to at least be
correct as far as it goes and then add a check for GRANT/REVOKE to only
tab-complete when the GRANT/REVOKE is the start of the command, so we
don't try to do tab-completion after we get to the GRANT/REVOKE part of
the ALTER DEFAULT PRIVILEGES command, which is better than providing
incorrect completions.
Initial patch for master and 9.6 by Gilles Darold, though I cleaned it
up and added a few comments. All bugs in the 9.5 and earlier patch are
mine.
Discussion: https://www.postgresql.org/message-id/1614593c-e356-5b27-6dba-66320a9bc68b@dalibo.com
There was code that attempted to check whether the sequence name stored
inside the sequence was the same as the name in pg_class. But that code
was already ifdef'ed out, and now that the sequence no longer stores its
own name, it's altogether obsolete, so remove it.
In pg_dump.c dumpCast() and dumpTransform(), we would happily ignore the
cast or transform if it happened to use a built-in function because we
weren't including the information about built-in functions when querying
pg_proc from getFuncs().
Modify the query in getFuncs() to also gather information about
functions which are used by user-defined casts and transforms (where
"user-defined" means "has an OID >= FirstNormalObjectId"). This also
adds to the TAP regression tests for 9.6 and master to cover these
types of objects.
Back-patch all the way for casts, back to 9.5 for transforms.
Discussion: https://www.postgresql.org/message-id/flat/20160504183952.GE10850%40tamriel.snowman.net
We didn't start ensuring that all built-in objects had OIDs less than
16384 until 8.1, so for 8.0 servers we still need to query the value out
of pg_database. We need this, in particular, to distinguish which casts
were built-in and which were user-defined.
For HEAD, we only worry about going back to 8.0, for the back-branches,
we also ensure that 7.0-7.4 work.
Discussion: https://www.postgresql.org/message-id/flat/20160504183952.GE10850%40tamriel.snowman.net
Commit 56c7d8d455 allowed pg_basebackup
to stream WAL in tar mode. But there is the restriction that WAL
streaming in tar mode works only when the value - (dash) is not
specified as output directory. This means that the combination of
three options "-D -", "-F t" and "-X stream" is invalid. However,
previously, even when those options were specified at the same time,
pg_basebackup background process unexpectedly started streaming WAL.
And then it exited with an error.
This commit changes pg_basebackup so that it errors out on such
invalid combination of options at the beginning.
Reviewed by Magnus Hagander, and patch by me.
Move sequence metadata (start, increment, etc.) into a proper system
catalog instead of storing it in the sequence heap object. This
separates the metadata from the sequence data. Sequence metadata is now
operated on transactionally by DDL commands, whereas previously
rollbacks of sequence-related DDL commands would be ignored.
Reviewed-by: Andreas Karlsson <andreas@proxel.se>
Partition name needs to be quoted in the ATTACH PARTITION command
constructed in binary-upgrade mode.
Silence compiler warning about set but unused variable, without
--enable-cassert.
Table partitioning is like table inheritance and reuses much of the
existing infrastructure, but there are some important differences.
The parent is called a partitioned table and is always empty; it may
not have indexes or non-inherited constraints, since those make no
sense for a relation with no data of its own. The children are called
partitions and contain all of the actual data. Each partition has an
implicit partitioning constraint. Multiple inheritance is not
allowed, and partitioning and inheritance can't be mixed. Partitions
can't have extra columns and may not allow nulls unless the parent
does. Tuples inserted into the parent are automatically routed to the
correct partition, so tuple-routing ON INSERT triggers are not needed.
Tuple routing isn't yet supported for partitions which are foreign
tables, and it doesn't handle updates that cross partition boundaries.
Currently, tables can be range-partitioned or list-partitioned. List
partitioning is limited to a single column, but range partitioning can
involve multiple columns. A partitioning "column" can be an
expression.
Because table partitioning is less general than table inheritance, it
is hoped that it will be easier to reason about properties of
partitions, and therefore that this will serve as a better foundation
for a variety of possible optimizations, including query planner
optimizations. The tuple routing based which this patch does based on
the implicit partitioning constraints is an example of this, but it
seems likely that many other useful optimizations are also possible.
Amit Langote, reviewed and tested by Robert Haas, Ashutosh Bapat,
Amit Kapila, Rajkumar Raghuwanshi, Corey Huinker, Jaime Casanova,
Rushabh Lathia, Erik Rijkers, among others. Minor revisions by me.
We have had support for restrictive RLS policies since 9.5, but they
were only available through extensions which use the appropriate hooks.
This adds support into the grammer, catalog, psql and pg_dump for
restrictive RLS policies, thus reducing the cases where an extension is
necessary.
In passing, also move away from using "AND"d and "OR"d in comments.
As pointed out by Alvaro, it's not really appropriate to attempt
to make verbs out of "AND" and "OR", so reword those comments which
attempted to.
Reviewed By: Jeevan Chalke, Dean Rasheed
Discussion: https://postgr.es/m/20160901063404.GY4028@tamriel.snowman.net
Commit b460f5d669 -- at my suggestion --
increased the default value of max_worker_processes from 8 to 16, on
the theory that this would be harmless and convenient for users.
Unfortunately, this caused some buildfarm machines with low connection
limits to start failing, so apparently it's not harmless after all.
Increase the default value of the existing max_worker_processes GUC
from 8 to 16, and add a new max_parallel_workers GUC with a maximum
of 8. This way, even if the maximum amount of parallel query is
happening, there is still room for background workers that do other
things, as originally envisioned when max_worker_processes was added.
Julien Rouhaud, reviewed by Amit Kapila and by revised by me.
Add an option to exclude blobs when running pg_dump. By default, blobs
are included but this option can be used to exclude them while keeping
the rest of the dump.
Commment updates and regression tests from me.
Author: Guillaume Lelarge
Reviewed-by: Amul Sul
Discussion: https://postgr.es/m/VisenaEmail.48.49926ea6f91dceb6.15355a48249@tc7-visena
Instead of confusingly stating platform-dependent defaults for these
parameters in the comments in postgresql.conf.sample (with the main
entry being a lie on Linux), teach initdb to install the correct
platform-dependent value in postgresql.conf, similarly to the way
we handle other platform-dependent defaults. This won't do anything
for existing 9.6 installations, but since it's effectively only a
documentation improvement, that seems OK.
Since this requires initdb to have access to the default values,
move the #define's for those to pg_config_manual.h; the original
placement in bufmgr.h is unworkable because that file can't be
included by frontend programs.
Adjust the default value for wal_writer_flush_after so that it is 1MB
regardless of XLOG_BLCKSZ, conforming to what is stated in both the
SGML docs and postgresql.conf. (We could alternatively make it scale
with XLOG_BLCKSZ, but I'm not sure I see the point.)
Copy-edit related SGML documentation.
Fabien Coelho and Tom Lane, per a gripe from Tomas Vondra.
Discussion: <30ebc6e3-8358-09cf-44a8-578252938424@2ndquadrant.com>
Add a loop to check that each test covers all of the pg_dump runs. We
(I) had been a bit sloppy when adding new runs and not making sure to
mark if they should be under like or unlike for each test, this loop
makes sure that the test system will complain if any are forgotten in
the future.
The loop also correctly handles the 'catch all' cases, which are used to
avoid running unnecessary specific checks when a single catch-all can be
done (eg: a no-acl run should not have any GRANT commands).
Also, re-enable the testing of blobs, but use lo_from_bytea() instead of
trying to be cute and writing out to a file and then reading it back in
with psql, which proved to be difficult for some buildfarm members.
This allows us to add support for testing the --no-blobs option which
will be getting added shortly, provided the buildfarm doesn't blow up on
this.
pg_dump's traditional solution for breaking a circular dependency involving
a view was to create the view with CREATE TABLE and then later issue CREATE
RULE "_RETURN" ... to convert the table to a view, relying on the backend's
very very ancient code that supports making views that way. We've wanted
to get rid of that kluge for a long time, but the thing that finally
motivates doing something about it is the recognition that this method
fails with the --clean option, because it leads to issuing DROP RULE
"_RETURN" followed by DROP TABLE --- and the backend won't let you drop a
view's _RETURN rule.
Instead, let's break circular dependencies by initially creating the view
using CREATE VIEW AS SELECT NULL::columntype AS columnname, ... (so that
it has the right column names and types to support external references,
but no dependencies beyond the column data types), and then later dumping
the ON SELECT rule using the spelling CREATE OR REPLACE VIEW. This method
wasn't available when this code was originally written, but it's been
possible since PG 7.3, so it seems fine to start relying on it now.
To solve the --clean problem, make the dropStmt for an ON SELECT rule
be CREATE OR REPLACE VIEW with the same dummy target list as above.
In this way, during the DROP phase, we first reduce the view to have
no extra dependencies, and then we can drop it entirely when we've
gotten rid of whatever had a circular dependency on it.
(Note: this should work adequately well with the --if-exists option, since
the CREATE OR REPLACE VIEW will go through whether the view exists or not.
It could fail if the view exists with a conflicting column set, but we
don't really support --clean against a non-matching database anyway.)
This allows cleaning up some other kluges inside pg_dump, notably that
we don't need a notion of reloptions attached to a rule anymore.
Although this is a bug fix, commit to HEAD only for now. The problem's
existed for a long time and we've had relatively few complaints, so it
doesn't really seem worth taking risks to fix it in the back branches.
We might revisit that choice if no problems emerge.
Discussion: <19092.1479325184@sss.pgh.pa.us>
Teach it not to complain if the dropStmt attached to an archive entry
is actually spelled CREATE OR REPLACE VIEW, since that will happen due to
an upcoming bug fix. Also, if it doesn't recognize a dropStmt, have it
print a WARNING and then emit the dropStmt unmodified. That seems like a
much saner behavior than Assert'ing or dumping core due to a null-pointer
dereference, which is what would happen before :-(.
Back-patch to 9.4 where this option was introduced.
Discussion: <19092.1479325184@sss.pgh.pa.us>
Commit 41124a91e6 allowed the
transaction log file prefix to be changed but left in place the
existing 64-character limit on the total length of a log file name.
It's possible that could be inconvenient for somebody, so increase the
limit to MAXPGPATH, which ought to be enough for anybody.
Per a suggestion from Tom Lane.
Previously, pg_upgrade migrated sequence data like tables by copying the
on-disk file. This does not allow any changes in the on-disk format for
sequences. It's simpler to just have pg_dump set the new sequence
values as it normally does. To do that, create a hidden submode in
pg_dump that dumps sequence data even when a schema-only dump is
requested, and trigger that submode in binary upgrade mode. (This new
submode could easily be exposed as a command-line option, but it has
limited use outside of pg_dump and would probably cause some confusion,
so we don't do that at this time.)
Reviewed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Instead of handling both sequence data and table data internally as
"table data", handle sequences separately under a "sequence set" type.
We already handled materialized view data differently, so it makes the
code somewhat cleaner to handle each relation kind separately at the top
level.
This does not change the output format, since there already was a
separate "SEQUENCE SET" archive entry type. A noticeable difference is
that SEQUENCE SET entries now always appear after TABLE DATA entries.
And in parallel mode there is less sorting to do, because the sequence
data entries are no longer considered table data.
Reviewed-by: Anastasia Lubennikova <a.lubennikova@postgrespro.ru>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
For ALTER TYPE .. RENAME, add "VALUE" to the list of possible
completions. Complete ALTER TYPE .. RENAME VALUE with possible
enum values. After that, complete with "TO".
Dagfinn Ilmari Mannsåker, reviewed by Artur Zakirov.
In each case, absence of a trailing newline would itself constitute a
PostgreSQL bug. Therefore, this slightly enhances the changed tests.
This works around a bug that last appeared in Perl 5.8.8, fixing
src/test/modules/test_pg_dump when run against that version. Commit
e7293e3271 worked around the bug, but the
subsequent addition of test_pg_dump introduced affected code. As that
commit had shown, slight increases in pattern complexity can suppress
the bug. This commit edits qr/foo$/m patterns too complex to encounter
the bug today, for style consistency and robustness against unrelated
pattern changes. Back-patch to 9.6, where test_pg_dump was introduced.
As of this writing, a fresh MSYS installation includes an affected Perl
5.8.8. The Perl 5.8.8 in Red Hat Enterprise Linux 5.11 carries a patch
that renders it unaffected, but the Perl 5.8.5 of Red Hat Enterprise
Linux 4.4 is affected.
The ArchiveHandle structure contained the archive format version number
twice, once as a single field and once split into components. Simplify
that by just keeping the single field and adding some macros to extract
the components. Introduce some macros for composing version numbers, to
eliminate the repeated use of magic formulas. Drop the unused trailing
zero byte from the run-time composite version representation.
reviewed by Tom Lane
Using the name fsync clashed with the #define we have on Windows that
redefines it to _commit. Naming it sync should remove that conflict.
Per all the Windows buildfarm members
This will write the received transaction log into a file called
pg_wal.tar(.gz) next to the other tarfiles instead of writing it to
base.tar. When using fetch mode, the transaction log is still written to
base.tar like before, and when used against a pre-10 server, the file
is named pg_xlog.tar.
To do this, implement a new concept of a "walmethod", which is
responsible for writing the WAL. Two implementations exist, one that
writes to a plain directory (which is also used by pg_receivexlog) and
one that writes to a tar file with optional compression.
Reviewed by Michael Paquier
"xlog" is not a particularly clear abbreviation for "write-ahead log",
and it sometimes confuses users into believe that the contents of the
"pg_xlog" directory are not critical data, leading to unpleasant
consequences. So, rename the directory to "pg_wal".
This patch modifies pg_upgrade and pg_basebackup to understand both
the old and new directory layouts; the former is necessary given the
purpose of the tool, while the latter merely avoids an unnecessary
backward-compatibility break.
We may wish to consider renaming other programs, switches, and
functions which still use the old "xlog" naming to also refer to
"wal". However, that's still under discussion, so let's do just this
much for now.
Discussion: CAB7nPqTeC-8+zux8_-4ZD46V7YPwooeFxgndfsq5Rg8ibLVm1A@mail.gmail.com
Michael Paquier
Switch TAP tests to use the new wait mode of pg_ctl promote. This
allows avoiding extra logic with poll_query_until() to be sure that a
promoted standby is ready for read-write queries.
From: Michael Paquier <michael.paquier@gmail.com>
--noclean and --nosync were the only options spelled without a hyphen,
so change this for consistency with other options. The options in
pg_basebackup have not been in a release, so we just rename them. For
initdb, we retain the old variants.
Vik Fearing and me
I'm not sure if this provision for "pg_backup" behaving a bit differently
from "pg_dump" ever did anything useful in a released version. But it's
definitely dead code now.
Michael Paquier
The expected results in commit b4fc64578 seem to have been generated
in a non-C locale, which just points up the fact that the ORDER BY
clause was locale-sensitive.
Per buildfarm.
Previously GRANT order on databases was not well defined, due to the use
of EXCEPT without an ORDER BY. Add an ORDER BY, adapt test output.
I don't, at the moment, see reason to backpatch this.
Commit 64f3524e2 removed the stanza of code that examined these values.
I failed to notice they were unnecessary because my compiler didn't
warn about the un-read variables. Noted by Peter Eisentraut.
The need for dumping from such ancient servers has decreased to about nil
in the field, so let's remove all the code that catered to it. Aside
from removing a lot of boilerplate variant queries, this allows us to not
have to cope with servers that don't have (a) schemas or (b) pg_depend.
That means we can get rid of assorted squishy code around that. There
may be some nonobvious additional simplifications possible, but this patch
already removes about 1500 lines of code.
I did not remove the ability for pg_restore to read custom-format archives
generated by these old versions (and light testing says that that does
still work). If you have an old server, you probably also have a pg_dump
that will work with it; but you have an old custom-format backup file,
that might be all you have.
It'd be possible at this point to remove fmtQualifiedId()'s version
argument, but I refrained since that would affect code outside pg_dump.
Discussion: <2661.1475849167@sss.pgh.pa.us>
getBlobs' queries for pre-9.0 servers were broken in two ways:
the 7.x/8.x query uses DISTINCT so it can't have unspecified-type
NULLs in the target list, and both that query and the 7.0 one
failed to provide the correct output column labels, so that the
subsequent code to extract data from the PGresult would fail.
Back-patch to 9.6 where the breakage was introduced (by commit 23f34fa4b).
Amit Langote and Tom Lane
Discussion: <0a3e7a0e-37bd-8427-29bd-958135862f0a@lab.ntt.co.jp>
They are supposed to be mutually exclusive, but there was no check for
that.
Michael Banck
Discussion: <20161007103414.GD12247@nighthawk.caipicrew.dd-dns.de>
If you point pg_rewind to a server that is using synchronous replication,
with "pg_rewind --source-server=...", and the replication is not working
for some reason, pg_rewind will get stuck because it creates a temporary
table, which needs to be replicated. You could call broken replication a
pilot error, but pg_rewind is often used in special circumstances, when
there are changes to the replication setup.
We don't do any "real" updates, and we don't care about fsyncing or
replicating the operations on the temporary tables, so fix that by
setting synchronous_commit off.
Michael Banck, Michael Paquier. Backpatch to 9.5, where pg_rewind was
introduced.
Discussion: <20161005143938.GA12247@nighthawk.caipicrew.dd-dns.de>
pg_upgrade checks whether all the shared libraries used in the old cluster
are also available in the new one by issuing LOAD for each library name.
Previously, it cared not what order it did the LOADs in. Ideally it
should not have to care, but currently the transform modules in contrib
fail unless both the language and datatype modules they depend on are
loaded first. A backend-side solution for that looks possible but
probably not back-patchable, so as a stopgap measure, let's do the LOAD
tests in order by library name length. That should fix the problem for
reasonably-named transform modules, eg "hstore_plpython" will be loaded
after both "hstore" and "plpython". (Yeah, it's a hack.)
In a larger sense, having a predictable order of these probes is a good
thing, since it will make upgrades predictably work or not work in the
face of inter-library dependencies. Also, this patch replaces O(N^2)
de-duplication logic with O(N log N) logic, which could matter in
installations with very many databases. So I don't foresee reverting this
even after we have a proper fix for the library-dependency problem.
In passing, improve a couple of SQL queries used here.
Per complaint from Andrew Dunstan that pg_upgrade'ing the transform contrib
modules failed. Back-patch to 9.5 where transform modules were introduced.
Discussion: <f7ac29f3-515c-2a44-21c5-ec925053265f@dunslane.net>
Without this, an extension containing an access method is not properly
dumped/restored during pg_upgrade --- the AM ends up not being a member
of the extension after upgrading.
Another oversight in commit 473b93287, reported by Andrew Dunstan.
Report: <f7ac29f3-515c-2a44-21c5-ec925053265f@dunslane.net>
Fixes errors introduced in commit bc34223bc, as detected by Coverity.
In passing, report ENOSPC for a short write while padding a new wal file in
open_walfile, make certain that close_walfile closes walfile in all cases,
and improve a couple of comments.
Michael Paquier and Tom Lane
The previous design for this had copyFile(), linkFile(), and
rewriteVisibilityMap() returning strerror strings, with the caller
producing one-size-fits-all error messages based on that. This made it
impossible to produce messages that described the failures with any degree
of precision, especially not short-read problems since those don't set
errno at all.
Since pg_upgrade has no intention of continuing after any error in this
area, let's fix this by just letting these functions call pg_fatal() for
themselves, making it easy for each point of failure to have a suitable
error message. Taking this approach also allows dropping cleanup code
that was unnecessary and was often rather sloppy about preserving errno.
To not lose relevant info that was reported before, pass in the schema name
and table name of the current table so that they can be included in the
error reports.
An additional problem was the use of getErrorText(), which was flat out
wrong for all but a couple of call sites, because it unconditionally did
"_dosmaperr(GetLastError())" on Windows. That's only appropriate when
reporting an error from a Windows-native API, which only a couple of
the callers were actually doing. Thus, even the reported strerror string
would be unrelated to the actual failure in many cases on Windows.
To fix, get rid of getErrorText() altogether, and just have call sites
do strerror(errno) instead, since that's the way all the rest of our
frontend programs do it. Add back the _dosmaperr() calls in the two
places where that's actually appropriate.
In passing, make assorted messages hew more closely to project style
guidelines, notably by removing initial capitals in not-complete-sentence
primary error messages. (I didn't make any effort to clean up places
I didn't have another reason to touch, though.)
Per discussion of a report from Thomas Kellerer. Back-patch to 9.6,
but no further; given the relative infrequency of reports of problems
here, it's not clear it's worth adapting the patch to older branches.
Patch by me, but with credit to Alvaro Herrera for spotting the issue
with getErrorText's misuse of _dosmaperr().
Discussion: <nsjrbh$8li$1@blaine.gmane.org>
This is new code in 9.6, and evidently we missed out testing it as
thoroughly as it should have been. Bugs fixed here:
1. Use binary not text mode to open the files on Windows. Before, if
the visibility map chanced to contain two bytes that looked like \r\n,
Windows' read() would convert that to \n, which both corrupts the map
data and causes the file to look shorter than it should. Unless you
were *very* unlucky and had an exact multiple of 8K such occurrences
in each VM file, this would cause pg_upgrade to report a failure,
though with a rather obscure error message.
2. The code for copying rebuilt bytes into the output was simply wrong.
It chanced to work okay on little-endian machines but would emit the
bytes in the wrong order on big-endian, leading to silent corruption
of the visibility map data.
3. The code was careless about alignment of the working buffers. Given
all three of an alignment-picky architecture, a compiler that chooses
to put the new_vmbuf[] local variable at an odd starting address, and
a checksum-enabled database, pg_upgrade would dump core.
Point one was reported by Thomas Kellerer, the other two detected by
code-reading.
Point two is much the nastiest of these issues from an impact standpoint,
though fortunately it affects only a minority of users. The Windows issue
will definitely bite people, but it seems quite unlikely that there would
be undetected corruption from that.
In addition, I failed to resist the temptation to do some minor cosmetic
adjustments, mostly improving the comments.
It would be a good idea to try to improve the error reporting here, but
that seems like material for a separate patch.
Discussion: <nsjrbh$8li$1@blaine.gmane.org>
There is a small window between when the server closes out the existing
segment and the new one is created. Put a loop around the open call in
this case to make sure we wait for the new file to actually appear.
Several places weren't careful about fsyncing in the way. See 1d4a0ab1
and 606e0f98 for details about required fsyncs.
This adds a couple of functions in src/common/ that have an equivalent
in the backend: durable_rename(), fsync_parent_path()
From: Michael Paquier <michael.paquier@gmail.com>
The list of files and directories that pg_basebackup excludes from the
backup was somewhat incomplete and unorganized. Change that with having
the exclusion driven from tables. Clean up some code around it. Also
document the exclusions in more detail so that users of pg_start_backup
can make use of it as well.
The contents of these directories are now excluded from the backup:
pg_dynshmem, pg_notify, pg_serial, pg_snapshots, pg_subtrans
Also fix a bug that a pg_repl_slot or pg_stat_tmp being a symlink would
cause a corrupt tar header to be created. Now such symlinks are
included in the backup as empty directories. Bug found by Ashutosh
Sharma <ashu.coek88@gmail.com>.
From: David Steele <david@pgmasters.net>
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The previous patch broke this by returning NULL for a failed CRC check,
which pg_controldata would then try to read. Fix by returning the
result of the CRC check in a separate argument.
Michael Paquier and myself
The only field of this struct that other files have any need to touch
is the pointer to the TocEntry a worker is working on. (Well,
pg_backup_archiver.c is actually looking at workerStatus too, but that
can be finessed by specifying that the TocEntry pointer is NULL for a
non-busy worker.)
Hence, move out the TocEntry pointers to a separate array within
struct ParallelState, and then we can make struct ParallelSlot private.
I noted the possibility of this previously, but hadn't got round to
actually doing it.
Discussion: <1188.1464544443@sss.pgh.pa.us>
The existing APIs for creating and parsing command and status messages are
rather messy; for example, archive-format modules have to provide code
for constructing command messages, which is entirely pointless since
the code to read them is hard-wired in WaitForCommands() and hence
no format-specific variation is actually possible. But there's little
foreseeable reason to need format-specific variation anyway.
The situation for status messages is no better; at least those are both
constructed and parsed by format-specific code, but said code is quite
redundant since there's no actual need for format-specific variation.
To add insult to injury, the first API involves returning pointers to
static buffers, which is bad, while the second involves returning pointers
to malloc'd strings, which is safer but randomly inconsistent.
Hence, get rid of the MasterStartParallelItem and MasterEndParallelItem
APIs, and instead write centralized functions that construct and parse
command and status messages. If we ever do need more flexibility, these
functions can be the standard implementations of format-specific
callback methods, but that's a long way off if it ever happens.
Tom Lane, reviewed by Kevin Grittner
Discussion: <17340.1464465717@sss.pgh.pa.us>
The ListenToWorkers/ReapWorkerStatus APIs were messy and hard to use.
Instead, make DispatchJobForTocEntry register a callback function that
will take care of state cleanup, doing whatever had been done by the caller
of ReapWorkerStatus in the old design. (This callback is essentially just
the old mark_work_done function in the restore case, and a trivial test for
worker failure in the dump case.) Then we can have ListenToWorkers call
the callback immediately on receipt of a status message, and return the
worker to WRKR_IDLE state; so the WRKR_FINISHED state goes away.
This allows us to design a unified wait-for-worker-messages loop:
WaitForWorkers replaces EnsureIdleWorker and EnsureWorkersFinished as well
as the mess in restore_toc_entries_parallel. Also, we no longer need the
fragile API spec that the caller of DispatchJobForTocEntry is responsible
for ensuring there's an idle worker, since DispatchJobForTocEntry can just
wait until there is one.
In passing, I got rid of the ParallelArgs struct, which was a net negative
in terms of notational verboseness, and didn't seem to be providing any
noticeable amount of abstraction either.
Tom Lane, reviewed by Kevin Grittner
Discussion: <1188.1464544443@sss.pgh.pa.us>
<sys/select.h> is required by POSIX.1-2001 to get the prototype of
select(2), but nearly no systems enforce that because older standards
let you get away with including some other headers. Recent OpenBSD
hacking has removed that frail touch of friendliness, however, which
broke some compiles; fix all the way back to 9.1 by adding the required
standard. Only vacuumdb.c was reported to fail, but it seems easier to
fix the whole lot in a fell swoop.
Per bug #14334 by Sean Farrell.
The result of FD_ISSET() doesn't necessarily fit in a bool, though
assigning it to one might accidentally work depending on platform and which
socket FD number is being inquired of. Rewrite to test it with if(),
rather than making any specific assumption about the result width,
to match the way every other such call in PG is written.
Don't break out of the input_mask-filling loop after finding the first
client that we're waiting for results from. That mostly breaks parallel
query management.
Also, if we choose not to call select(), be sure to clear out any bits
the mask-filling loop might have set, so that we don't accidentally call
doCustom for clients we don't know have input. Doing so would likely
be harmless, but it's a waste of cycles and doesn't seem to be intended.
Make this_usec wide enough. (Yeah, the value would usually fit in an
int, but then why are we using int64 everywhere else?)
Minor cosmetic adjustments, mostly comment improvements.
Problems introduced by commit 12788ae49. The first issue was discovered
by buildfarm testing, the others by code review.
The doCustom() function had grown into quite a mess. Rewrite it, in a more
explicit state machine style, for readability.
This also fixes one minor bug: if a script consisted entirely of meta
commands, doCustom() never returned to the caller, so progress reports
with the -P option were not printed. I don't want to backpatch this
refactoring, and the bug is quite insignificant, so only commit this to
master, and leave the bug unfixed in back-branches.
Review and original bug report by Fabien Coelho.
Discussion: <alpine.DEB.2.20.1607090850120.3412@sto>
We weren't terribly consistent about whether to call Apple's OS "OS X"
or "Mac OS X", and the former is probably confusing to people who aren't
Apple users. Now that Apple has rebranded it "macOS", follow their lead
to establish a consistent naming pattern. Also, avoid the use of the
ancient project name "Darwin", except as the port code name which does not
seem desirable to change. (In short, this patch touches documentation and
comments, but no actual code.)
I didn't touch contrib/start-scripts/osx/, either. I suspect those are
obsolete and due for a rewrite, anyway.
I dithered about whether to apply this edit to old release notes, but
those were responsible for quite a lot of the inconsistencies, so I ended
up changing them too. Anyway, Apple's being ahistorical about this,
so why shouldn't we be?
Faulty AND/OR nesting in the WHERE clause of getFuncs' SQL query led to
dumping range constructor functions if they are part of an extension
and we're in binary-upgrade mode. Actually, we don't want to dump them
separately even then, since CREATE TYPE AS RANGE will create the range's
constructor functions regardless. Per report from Andrew Dunstan.
It looks like this mistake was introduced by me, in commit b985d4877, in
perhaps-overzealous refactoring to reduce code duplication. I'm suitably
embarrassed.
Report: <34854939-02d7-f591-5677-ce2994104599@dunslane.net>
Magnus Hagander
Peter Eisentraut
Stephen Frost
Bruce Momjian
Robert Haas
Simon Riggs
Tom Lane
Fujii Masao
Heikki Linnakangas
Noah Misch
Kevin Grittner
Andres Freund
Alvaro Herrera