Commit 6bf5c42b55 cannot work on Windows,
because it lacks symlink support. While the bug fix in commit
cd64dc42d1 is correct as far as I know,
the test case changes depend on the previous commit, so this will
have to live without test coverage until we can come up with a better
solution. Commit fa7036dd66 was a test
case bug fix on top of those two, to prevent failures on Linux, so that
has to come out as well.
Per the buildfarm, CI, and Thomas Munro.
This commit doesn't use this infrastructure for anything new, although
it does adapt 010_pg_basebackup.pl to use it. However, a future commit
will use this to improve test coverage for pg_combinebackup.
Patch by me, reviewed (but not fully endorsed) by Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoYdXTjo9iQeoipTccDpWZzvBNS6EndY2uARM+T4yG_yDg@mail.gmail.com
It must be run on the target server and should be able to connect to
the source server (publisher) and the target server (subscriber). All
tables in the specified database(s) are included in the logical
replication setup. A pair of publication and subscription objects are
created for each database.
The main advantage of pg_createsubscriber over the common logical
replication setup is the initial data copy. It also reduces the
catchup phase.
Some prerequisites must be met to successfully run it. It is
basically the logical replication requirements. It starts creating a
publication using FOR ALL TABLES and a replication slot for each
specified database. Write recovery parameters into the target data
directory and start the target server. It specifies the LSN of the
last replication slot (replication start point) up to which the
recovery will proceed. Wait until the target server is promoted.
Create one subscription per specified database (using publication and
replication slot created in a previous step) on the target server.
Set the replication progress to the replication start point for each
subscription. Enable the subscription for each specified database on
the target server. And finally, change the system identifier on the
target server.
Author: Euler Taveira <euler.taveira@enterprisedb.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Shubham Khanna <khannashubham1197@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/5ac50071-f2ed-4ace-a8fd-b892cffd33eb@www.fastmail.com
Commit cca97ce6a6 allowed dbname in pg_basebackup connstring and in this
commit we allow it to be written in postgresql.auto.conf when -R option is
used. The database name in the connection string will be used by the
logical replication slot synchronization on standby.
The dbname will be recorded only if specified explicitly in the connection
string or environment variable.
Masahiko Sawada hasn't reviewed the code in detail but endorsed the idea.
Author: Vignesh C, Kuroda Hayato
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAB8KJ=hdKdg+UeXhReeHpHA6N6v3e0qFF+ZsPFHk9_ThWKf=2A@mail.gmail.com
This checks that certain I/O-related Perl functions properly check
their return value. Some parts of the PostgreSQL code had been a bit
sloppy about that. The new perlcritic warnings are fixed here. I
didn't design any beautiful error messages, mostly just used "or die
$!", which mostly matches existing code, and also this is
developer-level code, so having the system error plus source code
reference should be ok.
Initially, we only activate this check for a subset of what the
perlcritic check would warn about. The effective list is
chmod flock open read rename seek symlink system
The initial set of functions is picked because most existing code
already checked the return value of those, so any omissions are
probably unintended, or because it seems important for test
correctness.
The actual perlcritic configuration is written as an exclude list.
That seems better so that we are clear on what we are currently not
checking. Maybe future patches want to investigate checking some of
the other functions. (In principle, we might eventually want to check
all of them, but since this is test and build support code, not
production code, there are probably some reasonable compromises to be
made.)
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/88b7d4f2-46d9-4cc7-b1f7-613c90f9a76a%40eisentraut.org
Before this patch, if you took a full backup on server A and then
tried to use the backup manifest to take an incremental backup on
server B, it wouldn't know that the manifest was from a different
server and so the incremental backup operation could potentially
complete without error. When you later tried to run pg_combinebackup,
you'd find out that your incremental backup was and always had been
invalid. That's poor timing, because nobody likes finding out about
backup problems only at restore time.
With this patch, you'll get an error when trying to take the (invalid)
incremental backup, which seems a lot nicer.
Amul Sul, revised by me. Review by Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmoYLZzbSAMM3cAjV4Y+iCRZn-bR9H2+Mdz7NdaJFU1Zb5w@mail.gmail.com
There isn't a lot of user demand for AIX support, we have a bunch of
hacks to work around AIX-specific compiler bugs and idiosyncrasies,
and no one has stepped up to the plate to properly maintain it.
Remove support for AIX to get rid of that maintenance overhead. It's
still supported for stable versions.
The acute issue that triggered this decision was that after commit
8af2565248, the AIX buildfarm members have been hitting this
assertion:
TRAP: failed Assert("(uintptr_t) buffer == TYPEALIGN(PG_IO_ALIGN_SIZE, buffer)"), File: "md.c", Line: 472, PID: 2949728
Apperently the "pg_attribute_aligned(a)" attribute doesn't work on AIX
for values larger than PG_IO_ALIGN_SIZE, for a static const variable.
That could be worked around, but we decided to just drop the AIX support
instead.
Discussion: https://www.postgresql.org/message-id/20240224172345.32@rfd.leadboat.com
Reviewed-by: Andres Freund, Noah Misch, Thomas Munro
The macOS Finder application creates .DS_Store files in directories
when opened, which creates problems for serverside utilities which
expect all files to be PostgreSQL specific files. Skip these files
when encountered in pg_checksums, pg_rewind and pg_basebackup.
This was extracted from a larger patchset for skipping hidden files
and system files, where the concencus was to just skip these. Since
this is equally likely to happen in every version, backpatch to all
supported versions.
Reported-by: Mark Guertin <markguertin@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Tobias Bussmann <t.bussmann@gmx.net>
Discussion: https://postgr.es/m/E258CE50-AB0E-455D-8AAD-BB4FE8F882FB@gmail.com
Backpatch-through: v12
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
To take an incremental backup, you use the new replication command
UPLOAD_MANIFEST to upload the manifest for the prior backup. This
prior backup could either be a full backup or another incremental
backup. You then use BASE_BACKUP with the INCREMENTAL option to take
the backup. pg_basebackup now has an --incremental=PATH_TO_MANIFEST
option to trigger this behavior.
An incremental backup is like a regular full backup except that
some relation files are replaced with files with names like
INCREMENTAL.${ORIGINAL_NAME}, and the backup_label file contains
additional lines identifying it as an incremental backup. The new
pg_combinebackup tool can be used to reconstruct a data directory
from a full backup and a series of incremental backups.
Patch by me. Reviewed by Matthias van de Meent, Dilip Kumar, Jakub
Wartak, Peter Eisentraut, and Álvaro Herrera. Thanks especially to
Jakub for incredibly helpful and extensive testing.
Discussion: http://postgr.es/m/CA+TgmoYOYZfMCyOXFyC-P+-mdrZqm5pP2N7S-r0z3_402h9rsA@mail.gmail.com
Commit e213de8e78 fixed a problem with path lengths to a tempdir on
Windows, but caused problems on at least some Unix systems where the
system tempdir is on a different file system. To work around this, only
used the system temdir for the destination of pg_replslot on Windows,
and otherwise restore the old behaviour.
Backpatch to relase 14 like the previous patch.
Problem exposed by a myriad of buildfarm animals.
The symlink to a longer location tripped up some Windows limit on
buildfarm animal fairywren when running with meson, which uses slightly
longer paths.
Backpatch to release 14 to keep the script in sync. Before that the
script skipped all symlink related tests on Windows.
On Windows, it's sometimes difficult to create a file with a path longer
than 255 chars, and if it can be created it might not be seen by the
archiver. This can be triggered by the test for tar backups with
filenames greater than 100 bytes. So we skip that test if the path would
exceed 255.
Backpatch to all live branches.
Reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/666ac55b-3400-fb2c-2cea-0281bf36a53c@dunslane.net
Creation of a file with a very long name can create problems on Windows
due to its file path limits. Work around that by creating the file via a
symlink with a shorter name.
Error displayed by buildfarm animal fairywren.o
Backpatch to all live branches
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Commit c6f2f01611 purported to make
this work, but problems remained. In a plain-format backup, the
files from an in-place tablespace got included in the tar file for
the main tablespace, which is wrong but it's not clear that it
has any user-visible consequences. In a tar-format backup, the
TABLESPACE_MAP option is used, and so we never iterated over
pg_tblspc and thus never backed up the in-place tablespaces
anywhere at all.
To fix this, reverse the changes in that commit, so that when we scan
pg_tblspc during a backup, we create tablespaceinfo objects even for
in-place tablespaces. We set the field that would normally contain the
absolute pathname to the relative path pg_tblspc/${TSOID}, and that's
good enough to make basebackup.c happy without any further changes.
However, pg_basebackup needs a couple of adjustments to make it work.
First, it needs to understand that a relative path for a tablespace
means it's an in-place tablespace. Second, it needs to tolerate the
situation where restoring the main tablespace tries to create
pg_tblspc or a subdirectory and finds that it already exists, because
we restore user-defined tablespaces before the main tablespace.
Since in-place tablespaces are only intended for use in development
and testing, no back-patch.
Patch by me, reviewed by Thomas Munro and Michael Paquier.
Discussion: http://postgr.es/m/CA+TgmobwvbEp+fLq2PykMYzizcvuNv0a7gPMJtxOTMOuuRLMHg@mail.gmail.com
zstd compression supports a special mode for finding matched in distant
past, which may result in better compression ratio, at the expense of
using more memory (the window size is 128MB).
To enable this optional mode, use the "long" keyword when specifying the
compression method (--compress=zstd:long).
Author: Justin Pryzby
Reviewed-by: Tomas Vondra, Jacob Champion
Discussion: https://postgr.es/m/20230224191840.GD1653@telsasoft.com
Discussion: https://postgr.es/m/20220327205020.GM28503@telsasoft.com
PG_COMPRESSION_OPTION_LEVEL is removed from the compression
specification logic, and instead the compression level is always
assigned with each library's default if nothing is directly given. This
centralizes the checks on the compression methods supported by a given
build, and always assigns a default compression level when parsing a
compression specification. This results in complaining at an earlier
stage than previously if a build supports a compression method or not,
aka when parsing a specification in the backend or the frontend, and not
when processing it. zstd, lz4 and zlib are able to handle in their
respective routines setting up the compression level the case of a
default value, hence the backend or frontend code (pg_receivewal or
pg_basebackup) has now no need to know what the default compression
level should be if nothing is specified: the logic is now done so as the
specification parsing assigns it. It can also be enforced by passing
down a "level" set to the default value, that the backend will accept
(the replication protocol is for example able to handle a command like
BASE_BACKUP (COMPRESSION_DETAIL 'gzip:level=-1')).
This code simplification fixes an issue with pg_basebackup --gzip
introduced by ffd5365, where the tarball of the streamed WAL segments
would be created as of pg_wal.tar.gz with uncompressed contents, while
the intention is to compress the segments with gzip at a default level.
The origin of the confusion comes from the handling of the default
compression level of gzip (-1 or Z_DEFAULT_COMPRESSION) and the value of
0 was getting assigned, which is what walmethods.c would consider
as equivalent to no compression when streaming WAL segments with its tar
methods. Assigning always the compression level removes the confusion
of some code paths considering a value of 0 set in a specification as
either no compression or a default compression level.
Note that 010_pg_basebackup.pl has to be adjusted to skip a few tests
where the shape of the compression detail string for client and
server-side compression was checked using gzip. This is a result of the
code simplification, as gzip specifications cannot be used if a build
does not support it.
Reported-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 15
Commit c6f2f016 added an explicit check for a Windows "junction point".
That turned out to be needed only because get_dirent_type() was busted
on Windows. It's been fixed by commit 9d3444dc, so remove it.
Add a TAP-test to demonstrate that in-place tablespaces are copied by
pg_basebackup. This exercises the codepath that would fail before
c6f2f016 on Windows, and shows that it still doesn't fail now that we're
using get_dirent_type() on both Windows and Unix.
Back-patch to 15, where in-place tablespaces arrived and caused this
problem (ie directories where previously only symlinks were expected).
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGLzLK4PUPx0_AwXEWXOYAejU%3D7XpxnYE55Y%2Be7hB2N3FA%40mail.gmail.com
Since babbbb5 and the introduction of LZ4 in pg_receivewal, the
compression of the WAL archived is controlled by two options:
- --compression-method with "gzip", "none" or "lz4" as possible value.
- --compress=N to specify a compression level. This includes a
backward-incompatible change where a value of 0 leads to a failure
instead of no compression enforced.
This commit takes advantage of a4b5754 and 3603f7c to rework the
compression options of pg_receivewal, as of:
- The removal of --compression-method.
- The extenction of --compress to use the same grammar as pg_basebackup,
with a METHOD:DETAIL format, where a METHOD is "gzip", "none" or "lz4"
and a DETAIL is a comma-separated list of options, the only keyword
supported is now "level" to control the compression level. If only an
integer is specified as value of this option, "none" is implied on 0
and "gzip" is implied otherwise. This brings back --compress to be
backward-compatible with ~14, while still supporting LZ4.
This has also the advantage of centralizing the set of checks used by
pg_receivewal to validate its compression options.
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
libzstd allows transparent parallel compression just by setting
an option when creating the compression context, so permit that
for both client and server-side backup compression. To use this,
use something like pg_basebackup --compress WHERE-zstd:workers=N
where WHERE is "client" or "server" and N is an integer.
When compression is performed on the server side, this will spawn
threads inside the PostgreSQL backend. While there is almost no
PostgreSQL server code which is thread-safe, the threads here are used
internally by libzstd and touch only data structures controlled by
libzstd.
Patch by me, based in part on earlier work by Dipesh Pandit
and Jeevan Ladhe. Reviewed by Justin Pryzby.
Discussion: http://postgr.es/m/CA+Tgmobj6u-nWF-j=FemygUhobhryLxf9h-wJN7W-2rSsseHNA@mail.gmail.com
The previous method for doing that was to write zeroes into a
predetermined set of page locations. However, there's a roughly
1-in-64K chance that the existing checksum will match by chance,
and yesterday several buildfarm animals started to reproducibly
see that, resulting in test failures because no checksum mismatch
was reported.
Since the checksum includes the page LSN, test success depends on
the length of the installation's WAL history, which is affected by
(at least) the initial catalog contents, the set of locales installed
on the system, and the length of the pathname of the test directory.
Sooner or later we were going to hit a chance match, and today is
that day.
Harden these tests by specifically inverting the checksum field and
leaving all else alone, thereby guaranteeing that the checksum is
incorrect.
In passing, fix places that were using seek() to set up for syswrite(),
a combination that the Perl docs very explicitly warn against. We've
probably escaped problems because no regular buffered I/O is done on
these filehandles; but if it ever breaks, we wouldn't deserve or get
much sympathy.
Although we've only seen problems in HEAD, now that we recognize the
environmental dependencies it seems like it might be just a matter
of time until someone manages to hit this in back-branch testing.
Hence, back-patch to v11 where we started doing this kind of test.
Discussion: https://postgr.es/m/3192026.1648185780@sss.pgh.pa.us
The Config and Cwd modules were no longer used, but remained imported,
in a number of tests. Remove to keep the imports to the actually used
modules.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/A5A074CD-3198-492B-BE5E-7961EFC3733F@yesql.se
There are more compression parameters that can be specified than just
an integer compression level, so rename the new COMPRESSION_LEVEL
option to COMPRESSION_DETAIL before it gets released. Introduce a
flexible syntax for that option to allow arbitrary options to be
specified without needing to adjust the main replication grammar,
and common code to parse it that is shared between the client and
the server.
This commit doesn't actually add any new compression parameters,
so the only user-visible change is that you can now type something
like pg_basebackup --compress gzip:level=5 instead of writing just
pg_basebackup --compress gzip:5. However, it should make it easy to
add new options. If for example gzip starts offering fries, we can
support pg_basebackup --compress gzip:level=5,fries=true for the
benefit of users who want fries with that.
Along the way, this fixes a few things in pg_basebackup so that the
pg_basebackup can be used with a server-side compression algorithm
that pg_basebackup itself does not understand. For example,
pg_basebackup --compress server-lz4 could still succeed even if
only the server and not the client has LZ4 support, provided that
the other options to pg_basebackup don't require the client to
decompress the archive.
Patch by me. Reviewed by Justin Pryzby and Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/CA+TgmoYvpetyRAbbg1M8b3-iHsaN4nsgmWPjOENu5-doHuJ7fA@mail.gmail.com
These tests were added recently, but older code tests USE_LZ4 rathr
than HAVE_LIBLZ4, so let's follow the established precedent. It
also seems more consistent with the intent of the configure tests,
since I think that the USE_* symbols are intended to correspond to
what the user requested, and the HAVE_* symbols to what configure
found while probing.
Discussion: http://postgr.es/m/CA+Tgmoap+hTD2-QNPJLH4tffeFE8MX5+xkbFKMU3FKBy=ZSNKA@mail.gmail.com
If the log streaming child process (thread on Windows) dies during
backup then the whole backup will be aborted at the end of the
backup. Instead, trap ungraceful termination of the log streaming
child and exit early. This also adds a TAP test for simulating this
by terminating the responsible backend.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/0F69E282-97F9-4DB7-8D6D-F927AA6340C8@yesql.se
Discussion: https://postgr.es/m/VI1PR83MB0189818B82C19059CB62E26199A89@VI1PR83MB0189.EURPRD83.prod.outlook.com
Rather than doing manual book keeping to plan the number of tests to run
in each TAP suite, conclude each run with done_testing() summing up the
the number of tests that ran. This removes the need for maintaning and
updating the plan count at the expense of an accurate count of remaining
during the test suite runtime.
This patch has been discussed a number of times, often in the context of
other patches which updates tests, so a larger number of discussions can
be found in the archives.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/DD399313-3D56-4666-8079-88949DAC870F@yesql.se
Commit 8e2b6d45a0 added a new unprivileged user for testing
pg_basebackup, but omitted to add them to the cluster's authorized
logins, breaking Windows tests run without using Unix sockets.
When this code executed as superuser it appeared to work because no
system catalog lookups happened, but otherwise it crashes because there
is no transaction environment. Fix that.
Report and code change by me. Test case by Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/CA+TgmobiKLXne-2AVzYyWRiO8=rChBQ=7ywoxp=2SmcFw=oDDw@mail.gmail.com
The option --compress is extended to accept a compression method and an
optional compression level, as of the grammar METHOD[:LEVEL]. The
methods currently support are "none" and "gzip", for client-side
compression. Any of those methods use only an integer value for the
compression level, but any method implemented in the future could use
more specific keywords if necessary.
This commit keeps the logic backward-compatible. Hence, the following
compatibility rules apply for the new format of the option --compress:
* -z/--gzip is a synonym of --compress=gzip.
* --compress=NUM implies:
** --compress=none if NUM = 0.
** --compress=gzip:NUM if NUM > 0.
Note that there are also plans to extend more this grammar with
server-side compression.
Reviewed-by: Robert Haas, Magnus Hagander, Álvaro Herrera, David
G. Johnston, Georgios Kokolatos
Discussion: https://postgr.es/m/Yb3GEgWwcu4wZDuA@paquier.xyz
pg_basebackup now has a --target=TARGET[:DETAIL] option. If specfied,
it is sent to the server as the value of the TARGET option to the
BASE_BACKUP command. If DETAIL is included, it is sent as the value of
the new TARGET_DETAIL option to the BASE_BACKUP command. If the
target is anything other than 'client', pg_basebackup assumes that it
will now be the server's job to write the backup in a location somehow
defined by the target, and that it therefore needs to write nothing
locally. However, the server will still send messages to the client
for progress reporting purposes.
On the server side, we now support two additional types of backup
targets. There is a 'blackhole' target, which just throws away the
backup data without doing anything at all with it. Naturally, this
should only be used for testing and debugging purposes, since you will
not actually have a backup when it finishes running. More usefully,
there is also a 'server' target, so you can now use something like
'pg_basebackup -Xnone -t server:/SOME/PATH' to write a backup to some
location on the server. We can extend this to more types of targets
in the future, and might even want to create an extensibility
mechanism for adding new target types.
Since WAL fetching is handled with separate client-side logic, it's
not part of this mechanism; thus, backups with non-default targets
must use -Xnone or -Xfetch.
Patch by me, with a bug fix by Jeevan Ladhe. The patch set of which
this is a part has also had review and/or testing from Tushar Ahuja,
Suraj Kharage, Dipesh Pandit, and Mark Dilger.
Discussion: http://postgr.es/m/CA+TgmoaYZbz0=Yk797aOJwkGJC-LK3iXn+wzzMx7KdwNpZhS5g@mail.gmail.com
Most tests invoking pg_basebackup themselves did not yet use -cfast, which
makes pg_basebackup take considerably longer. The only reason this didn't
cause the tests to take many minutes is that spread checkpoints only throttle
when writing out a buffer and there aren't that many dirty buffers in the
tests...
Discussion: https://postgr.es/m/20220117195711.xx4qbxutrrlmo2dg@alap3.anarazel.de
By default, wait_for_catchup() waits for the replication connection
to reach the primary's write LSN. That's fine, but in an apparent
attempt to save one query round-trip, it was coded so that we
executed pg_current_wal_lsn() again during each probe query.
Thus, we presented the standby with a moving target to be reached.
(While the test script itself couldn't be causing the write LSN
to advance while it's blocked in wait_for_catchup(), it's plenty
plausible that background activity such as autovacuum is emitting
more WAL.) That could make the test take longer than necessary,
and potentially it could mask bugs by allowing the standby to process
more WAL than a strict interpretation of the test scenario allows.
So, change wait_for_catchup() to do it "by the book", explicitly
collecting the write LSN to wait for at the outset.
Also, various call sites were instructing wait_for_catchup() to
wait for the standby to reach the primary's insert LSN rather than
its write LSN. This also seems like a bad idea. While in most
test scenarios those are the same, if they are different then the
inserted-but-not-yet-written WAL is not presently available to the
standby. The test isn't doing anything to make it become so, so
again we have the potential for unwanted test delay, perhaps even
a test timeout. (Again, background activity would be needed to
make this more than a hypothetical problem.) Hence, change the
callers where necessary so that the wait target is always the
primary's write LSN.
While at it, simplify callers by making use of wait_for_catchup's
default arguments wherever possible (the preceding change makes
this possible in more places than it was before). And rewrite
wait_for_catchup's documentation a bit.
Patch by me; thanks to Julien Rouhaud for review.
Discussion: https://postgr.es/m/2368336.1641843098@sss.pgh.pa.us
pg_basebackup.c relies on the compression level to not be 0 to decide if
compression should be used, but 000f3adf missed the fact that the
default compression (Z_DEFAULT_COMPRESSION) is -1, which would be used
if specifying --gzip without --compress.
While on it, add some coverage for --gzip, as this is rather easy to
miss.
Reported-by: Christoph Berg
Discussion: https://postgr.es/m/YdhRDMLjabtXOnhY@msg.df7cb.de
pg_basebackup is able to use gzip to compress the contents of backups
with the tar format, but there were no tests for that. This adds a
minimalistic set of tests to check the contents of such base backups,
including sanity checks on the contents generated with gzip commands.
The tests are skipped if Postgres is compiled --without-zlib, and the
checks based on the gzip command are skipped if nothing can be found,
following the same model as the existing tests for pg_receivewal.
Reviewed-by: Georgios Kokolatos
Discussion: https://postgr.es/m/Yb3GEgWwcu4wZDuA@paquier.xyz
pg_receivewal gains a new option, --compression-method=lz4, available
when the code is compiled with --with-lz4. Similarly to gzip, this
gives the possibility to compress archived WAL segments with LZ4. This
option is not compatible with --compress.
The implementation uses LZ4 frames, and is compatible with simple lz4
commands. Like gzip, using --synchronous ensures that any data will be
flushed to disk within the current .partial segment, so as it is
possible to retrieve as much WAL data as possible even from a
non-completed segment (this requires completing the partial file with
zeros up to the WAL segment size supported by the backend after
decompression, but this is the same as gzip).
The calculation of the streaming start LSN is able to transparently find
and check LZ4-compressed segments. Contrary to gzip where the
uncompressed size is directly stored in the object read, the LZ4 chunk
protocol does not store the uncompressed data by default. There is
contentSize that can be used with LZ4 frames by that would not help if
using an archive that includes segments compressed with the defaults of
a "lz4" command, where this is not stored. So, this commit has taken
the most extensible approach by decompressing the already-archived
segment to check its uncompressed size, through a blank output buffer in
chunks of 64kB (no actual performance difference noticed with 8kB, 16kB
or 32kB, and the operation in itself is actually fast).
Tests have been added to verify the creation and correctness of the
generated LZ4 files. The latter is achieved by the use of command
"lz4", if found in the environment.
The tar-based WAL method in walmethods.c, used now only by
pg_basebackup, does not know yet about LZ4. Its code could be extended
for this purpose.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Jian Guo, Magnus Hagander, Dilip Kumar
Discussion: https://postgr.es/m/ZCm1J5vfyQ2E6dYvXz8si39HQ2gwxSZ3IpYaVgYa3lUwY88SLapx9EEnOf5uEwrddhx2twG7zYKjVeuP5MwZXCNPybtsGouDsAD1o2L_I5E=@pm.me
Robert Haas
Peter Eisentraut
Amit Kapila
Heikki Linnakangas
Daniel Gustafsson
Bruce Momjian
Andrew Dunstan
Tom Lane
Tomas Vondra
Michael Paquier
Thomas Munro
Noah Misch
Stephen Frost
Andres Freund