There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
Quotes are applied to GUCs in a very inconsistent way across the code
base, with a mix of double quotes or no quotes used. This commit
removes double quotes around all the GUC names that are obviously
referred to as parameters with non-English words (use of underscore,
mixed case, etc).
This is the result of a discussion with Álvaro Herrera, Nathan Bossart,
Laurenz Albe, Peter Eisentraut, Tom Lane and Daniel Gustafsson.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w@mail.gmail.com
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
The following changes are done:
- Addition of WaitEventBufferPin and WaitEventExtension, that hold a
list of wait events related to each category.
- Addition of two functions that encapsulate the list of wait events for
each category.
- Rename BUFFER_PIN to BUFFERPIN (only this wait event class used an
underscore, requiring a specific rule in the automation script).
These changes make a bit easier the automatic generation of all the code
and documentation related to wait events, as all the wait event
categories are now controlled by consistent structures and functions.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/c6f35117-4b20-4c78-1df5-d3056010dcf5@gmail.com
Discussion: https://postgr.es/m/77a86b3a-c4a8-5f5d-69b9-d70bbf2e9b98@gmail.com
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
In order to have the option to use O_DIRECT/FILE_FLAG_NO_BUFFERING in a
later commit, we need the addresses of user space buffers to be well
aligned. The exact requirements vary by OS and file system (typically
sectors and/or memory pages). The address alignment size is set to
4096, which is enough for currently known systems: it matches modern
sectors and common memory page size. There is no standard governing
O_DIRECT's requirements so we might eventually have to reconsider this
with more information from the field or future systems.
Aligning I/O buffers on memory pages is also known to improve regular
buffered I/O performance.
Three classes of I/O buffers for regular data pages are adjusted:
(1) Heap buffers are now allocated with the new palloc_aligned() or
MemoryContextAllocAligned() functions introduced by commit 439f6175.
(2) Stack buffers now use a new struct PGIOAlignedBlock to respect
PG_IO_ALIGN_SIZE, if possible with this compiler. (3) The buffer
pool is also aligned in shared memory.
WAL buffers were already aligned on XLOG_BLCKSZ. It's possible for
XLOG_BLCKSZ to be configured smaller than PG_IO_ALIGNED_SIZE and thus
for O_DIRECT WAL writes to fail to be well aligned, but that's a
pre-existing condition and will be addressed by a later commit.
BufFiles are not yet addressed (there's no current plan to use O_DIRECT
for those, but they could potentially get some incidental speedup even
in plain buffered I/O operations through better alignment).
If we can't align stack objects suitably using the compiler extensions
we know about, we disable the use of O_DIRECT by setting PG_O_DIRECT to
0. This avoids the need to consider systems that have O_DIRECT but
can't align stack objects the way we want; such systems could in theory
be supported with more work but we don't currently know of any such
machines, so it's easier to pretend there is no O_DIRECT support
instead. That's an existing and tested class of system.
Add assertions that all buffers passed into smgrread(), smgrwrite() and
smgrextend() are correctly aligned, unless PG_O_DIRECT is 0 (= stack
alignment tricks may be unavailable) or the block size has been set too
small to allow arrays of buffers to be all aligned.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg@mail.gmail.com
This is similar to 7d25958, and this commit takes care of all the
remaining inconsistencies between the initial value used in the C
variable associated to a GUC and its default value stored in the GUC
tables (as of pg_settings.boot_val).
Some of the initial values of the GUCs updated rely on a compile-time
default. These are refactored so as the GUC table and its C declaration
use the same values. This makes everything consistent with other
places, backend_flush_after, bgwriter_flush_after, port,
checkpoint_flush_after doing so already, for example.
Extracted from a larger patch by Peter Smith. The spots updated in the
modules are from me.
Author: Peter Smith, Michael Paquier
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
Most code prints PIDs as %d, but some code tried to print them as long
or unsigned long. While this is in theory allowed, the fact that PIDs
fit into int is deeply baked into all PostgreSQL code, so these random
deviations don't accomplish anything except confusion.
Note that we still need casts from pid_t to int, because on 64-bit
MinGW, pid_t is long long int. (But per above, actually supporting
that range in PostgreSQL code would be major surgery and probably not
useful.)
Discussion: https://www.postgresql.org/message-id/289c2e45-c7d9-5ce4-7eff-a9e2a33e1580@enterprisedb.com
The generated resource files aren't exactly the same ones as the old
buildsystems generate. Previously "InternalName" and "OriginalFileName" were
mostly wrong / not set (despite being required), but that was hard to fix in
at least the make build. Additionally, the meson build falls back to a
"auto-generated" description when not set, and doesn't set it in a few cases -
unlikely that anybody looks at these descriptions in detail.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
This is preparatory work for a project to increase the number of bits
in a RelFileNumber from 32 to 56.
Along the way, introduce static inline accessor functions for a couple
of BufferTag fields.
Dilip Kumar, reviewed by me. The overall patch series has also had
review at various times from Andres Freund, Ashutosh Sharma, Hannu
Krosing, Vignesh C, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CAFiTN-trubju5YbWAq-BSpZ90-Z6xCVBQE8BVqXqANOZAF1Znw@mail.gmail.com
After commit 089480c07, it's necessary for background worker entry
points to be marked PGDLLEXPORT, else they aren't findable by
LookupBackgroundWorkerFunction(). Since pg_prewarm lacks any
regression tests, it's not surprising its worker entry points were
overlooked. (A quick search turned up no other such oversights.)
I added some documentation pointing out the need for this, too.
Robins Tharakan and Tom Lane
CAEP4nAzndnQv3-1QKb=D-hLoK3Rko12HHMFHHtdj2GQAUXO3gw@mail.gmail.com
This replaces all MemSet() calls with struct initialization where that
is easily and obviously possible. (For example, some cases have to
worry about padding bits, so I left those.)
(The same could be done with appropriate memset() calls, but this
patch is part of an effort to phase out MemSet(), so it doesn't touch
memset() calls.)
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/9847b13c-b785-f4e2-75c3-12ec77a3b05c@enterprisedb.com
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
Currently, preloaded libraries are expected to request additional
shared memory and LWLocks in _PG_init(). However, it is not unusal
for such requests to depend on MaxBackends, which won't be
initialized at that time. Such requests could also depend on GUCs
that other modules might change. This introduces a new hook where
modules can safely use MaxBackends and GUCs to request additional
shared memory and LWLocks.
Furthermore, this change restricts requests for shared memory and
LWLocks to this hook. Previously, libraries could make requests
until the size of the main shared memory segment was calculated.
Unlike before, we no longer silently ignore requests received at
invalid times. Instead, we FATAL if someone tries to request
additional shared memory or LWLocks outside of the hook.
Nathan Bossart and Julien Rouhaud
Discussion: https://postgr.es/m/20220412210112.GA2065815%40nathanxps13
Discussion: https://postgr.es/m/Yn2jE/lmDhKtkUdr@paquier.xyz
Commit 75d22069e tried to throw a warning for setting a custom GUC whose
prefix belongs to a previously-loaded extension, if there is no such GUC
defined by the extension. But that caused unstable behavior with
parallel workers, because workers don't necessarily load extensions and
GUCs in the same order their leader did. To make that work safely, we
have to completely disallow the case. We now actually remove any such
GUCs at the time of initial extension load, and then throw an error not
just a warning if you try to add one later. While this might create a
compatibility issue for a few people, the improvement in error-detection
capability seems worth it; it's hard to believe that there's any good
use-case for choosing such GUC names.
This also un-reverts 5609cc01c (Rename EmitWarningsOnPlaceholders() to
MarkGUCPrefixReserved()), since that function's old name is now even
more of a misnomer.
Florin Irion and Tom Lane
Discussion: https://postgr.es/m/1902182.1640711215@sss.pgh.pa.us
This moves the functions related to performing WAL recovery into the new
xlogrecovery.c source file, leaving xlog.c responsible for maintaining
the WAL buffers, coordinating the startup and switch from recovery to
normal operations, and other miscellaneous stuff that have always been in
xlog.c.
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Robert Haas
Discussion: https://www.postgresql.org/message-id/a31f27b4-a31d-f976-6217-2b03be646ffa%40iki.fi
This seems like a clearer name for what it does now.
Provide a compatibility macro so that extensions don't have to convert
to the new name right away.
Discussion: https://postgr.es/m/116024.1640111629@sss.pgh.pa.us
The idea behind this patch is to design out bugs like the one fixed
by commit 9d523119f. Previously, once one did RelationOpenSmgr(rel),
it was considered okay to access rel->rd_smgr directly for some
not-very-clear interval. But since that pointer will be cleared by
relcache flushes, we had bugs arising from overreliance on a previous
RelationOpenSmgr call still being effective.
Now, very little code except that in rel.h and relcache.c should ever
touch the rd_smgr field directly. The normal coding rule is to use
RelationGetSmgr(rel) and not expect the result to be valid for longer
than one smgr function call. There are a couple of places where using
the function every single time seemed like overkill, but they are now
annotated with large warning comments.
Amul Sul, after an idea of mine.
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
If a database shutdown (smart or fast) is commanded between the time
some process decides to request a new background worker and the time
that the postmaster can launch that worker, then nothing happens
because the postmaster won't launch any bgworkers once it's exited
PM_RUN state. This is fine ... unless the requesting process is
waiting for that worker to finish (or even for it to start); in that
case the requestor is stuck, and only manual intervention will get us
to the point of being able to shut down.
To fix, cancel pending requests for workers when the postmaster sends
shutdown (SIGTERM) signals, and similarly cancel any new requests that
arrive after that point. (We can optimize things slightly by only
doing the cancellation for workers that have waiters.) To fit within
the existing bgworker APIs, the "cancel" is made to look like the
worker was started and immediately stopped, causing deregistration of
the bgworker entry. Waiting processes would have to deal with
premature worker exit anyway, so this should introduce no bugs that
weren't there before. We do have a side effect that registration
records for restartable bgworkers might disappear when theoretically
they should have remained in place; but since we're shutting down,
that shouldn't matter.
Back-patch to v10. There might be value in putting this into 9.6
as well, but the management of bgworkers is a bit different there
(notably see 8ff518699) and I'm not convinced it's worth the effort
to validate the patch for that branch.
Discussion: https://postgr.es/m/661570.1608673226@sss.pgh.pa.us
Bad things happen if the DBA issues "pg_ctl stop -m fast" before
autoprewarm finishes loading its list of blocks to prewarm.
The current worker process successfully terminates early, but
(if this wasn't the last database with blocks to prewarm) the
leader process will just try to launch another worker for the
next database. Since the postmaster is now in PM_WAIT_BACKENDS
state, it ignores the launch request, and the leader just sits
until it's killed manually.
This is mostly the fault of our half-baked design for launching
background workers, but a proper fix for that is likely to be
too invasive to be back-patchable. To ameliorate the situation,
fix apw_load_buffers() to check whether SIGTERM has arrived
just before trying to launch another worker. That leaves us with
only a very narrow window in each worker launch where SIGTERM
could occur between the launch request and successful worker start.
Another issue is that if the leader process does manage to exit,
it unconditionally rewrites autoprewarm.blocks with only the
blocks currently in shared buffers, thus forgetting any blocks
that we hadn't reached yet while prewarming. This seems quite
unhelpful, since the next database start will then not have the
expected prewarming benefit. Fix it to not modify the file if
we shut down before the initial load attempt is complete.
Per bug #16785 from John Thompson. Back-patch to v11 where
the autoprewarm code was introduced.
Discussion: https://postgr.es/m/16785-c0207d8c67fb5f25@postgresql.org
Introduce TimestampDifferenceMilliseconds() to simplify callers
that would rather have the difference in milliseconds, instead of
the select()-oriented seconds-and-microseconds format. This gets
rid of at least one integer division per call, and it eliminates
some apparently-easy-to-mess-up arithmetic.
Two of these call sites were in fact wrong:
* pg_prewarm's autoprewarm_main() forgot to multiply the seconds
by 1000, thus ending up with a delay 1000X shorter than intended.
That doesn't quite make it a busy-wait, but close.
* postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute
microseconds not milliseconds, thus ending up with a delay 1000X longer
than intended. Somebody along the way had noticed this problem but
misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather
than fixing the units. This was relatively harmless in context, because
we don't care that much about exactly how long this delay is; still,
it's wrong.
There are a few more callers of TimestampDifference() that don't
have a direct need for seconds-and-microseconds, but can't use
TimestampDifferenceMilliseconds() either because they do need
microsecond precision or because they might possibly deal with
intervals long enough to overflow 32-bit milliseconds. It might be
worth inventing another API to improve that, but that seems outside
the scope of this patch; so those callers are untouched here.
Given the fact that we are fixing some bugs, and the likelihood
that future patches might want to back-patch code that uses this
new API, back-patch to all supported branches.
Alexey Kondratov and Tom Lane
Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
xact.h included utils/datetime.h, which cannot be used in the frontend
(it includes fmgr.h, which needs Datum). But xact.h only needs the
definition of TimestampTz from it, which is available directly in
datatypes/timestamp.h. Change xact.h to include that instead of
utils/datetime.h, so that it can be used in client programs.
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.
By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.
Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
We should try to prewarm each database only once. Otherwise, if
prewarming fails for some reason, it will just keep retrying in an
infnite loop. This can happen if, for example, the database has been
dropped. The existing code was intended to implement the try-once
behavior, but failed to do so because it neglected to set
worker.bgw_restart_time to BGW_NEVER_RESTART.
Mithun Cy, per a report from Hans Buschmann
Discussion: http://postgr.es/m/CA+hUKGKpQJCWcgyy3QTC9vdn6uKAR_8r__A-MMm2GYfj45caag@mail.gmail.com
Users of the WaitEventSet and WaitLatch() APIs can now choose between
asking for WL_POSTMASTER_DEATH and then handling it explicitly, or asking
for WL_EXIT_ON_PM_DEATH to trigger immediate exit on postmaster death.
This reduces code duplication, since almost all callers want the latter.
Repair all code that was previously ignoring postmaster death completely,
or requesting the event but ignoring it, or requesting the event but then
doing an unconditional PostmasterIsAlive() call every time through its
event loop (which is an expensive syscall on platforms for which we don't
have USE_POSTMASTER_DEATH_SIGNAL support).
Assert that callers of WaitLatchXXX() under the postmaster remember to
ask for either WL_POSTMASTER_DEATH or WL_EXIT_ON_PM_DEATH, to prevent
future bugs.
The only process that doesn't handle postmaster death is syslogger. It
waits until all backends holding the write end of the syslog pipe
(including the postmaster) have closed it by exiting, to be sure to
capture any parting messages. By using the WaitEventSet API directly
it avoids the new assertion, and as a by-product it may be slightly
more efficient on platforms that have epoll().
Author: Thomas Munro
Reviewed-by: Kyotaro Horiguchi, Heikki Linnakangas, Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D1TCviRykkUb69ppWLr_V697rzd1j3eZsRMmbXvETfqbQ%40mail.gmail.com,
https://postgr.es/m/CAEepm=2LqHzizbe7muD7-2yHUbTOoF7Q+qkSD5Q41kuhttRTwA@mail.gmail.com
This makes a bit less work for translators, by unifying error strings a
bit more with what the rest of the code does, this time for three error
strings in autoprewarm and one in base backup code.
After some code review of slot.c, some file-access errcodes are reported
but lead to an incorrect internal error, while corrupted data makes the
most sense, similarly to the previous work done in e41d0a1. Also,
after calling rmtree(), a WARNING gets reported, which is a duplicate of
what the internal call report, so make the code more consistent with all
other code paths calling this function.
Author: Michael Paquier
Discussion: https://postgr.es/m/20180902200747.GC1343@paquier.xyz
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
autoprewarm.c mostly considered the number of blocks it might be dealing
with as being int64. This is unnecessary, because NBuffers is declared
as int, and there's been no suggestion that we might widen it in the
foreseeable future. Moreover, using int64 is problematic because the
code expected INT64_FORMAT to work with fscanf(), something we don't
guarantee, and which indeed fails on some older buildfarm members.
On top of that, the module randomly used uint32 rather than int64 variables
to hold block counters in several places, so it would fail anyway if we
ever did have NBuffers wider than that; and it also supposed that pg_qsort
could sort an int64 number of elements, which is wrong on 32-bit machines
(though no doubt a 32-bit machine couldn't actually have that many
buffers).
Hence, change all these variables to plain int.
In passing, avoid shadowing one variable named i with another,
and avoid casting away const in apw_compare_blockinfo.
Discussion: https://postgr.es/m/7773.1525288909@sss.pgh.pa.us