This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com1290721684-sup-3951@alvh.no-ip.org1294953201-sup-2099@alvh.no-ip.org1320343602-sup-2290@alvh.no-ip.org1339690386-sup-8927@alvh.no-ip.org4FE5FF020200002500048A3D@gw.wicourts.gov4FEAB90A0200002500048B7D@gw.wicourts.gov
This reduces unnecessary exposure of other headers through htup.h, which
is very widely included by many files.
I have chosen to move the function prototypes to the new file as well,
because that means htup.h no longer needs to include tupdesc.h. In
itself this doesn't have much effect in indirect inclusion of tupdesc.h
throughout the tree, because it's also required by execnodes.h; but it's
something to explore in the future, and it seemed best to do the htup.h
change now while I'm busy with it.
Because permissions are assigned to element types, not array types,
complaining about permission denied on an array type would be
misleading to users. So adjust the reporting to refer to the element
type instead.
In order not to duplicate the required logic in two dozen places,
refactor the permission denied reporting for types a bit.
pointed out by Yeb Havinga during the review of the type privilege
feature
When a view is marked as a security barrier, it will not be pulled up
into the containing query, and no quals will be pushed down into it,
so that no function or operator chosen by the user can be applied to
rows not exposed by the view. Views not configured with this
option cannot provide robust row-level security, but will perform far
better.
Patch by KaiGai Kohei; original problem report by Heikki Linnakangas
(in October 2009!). Review (in earlier versions) by Noah Misch and
others. Design advice by Tom Lane and myself. Further review and
cleanup by me.
This adds support for the more or less SQL-conforming USAGE privilege
on types and domains. The intent is to be able restrict which users
can create dependencies on types, which restricts the way in which
owners can alter types.
reviewed by Yeb Havinga
SP-GiST is comparable to GiST in flexibility, but supports non-balanced
partitioned search structures rather than balanced trees. As described at
PGCon 2011, this new indexing structure can beat GiST in both index build
time and query speed for search problems that it is well matched to.
There are a number of areas that could still use improvement, but at this
point the code seems committable.
Teodor Sigaev and Oleg Bartunov, with considerable revisions by Tom Lane
When building a GiST index that doesn't fit in cache, buffers are attached
to some internal nodes in the index. This speeds up the build by avoiding
random I/O that would otherwise be needed to traverse all the way down the
tree to the find right leaf page for tuple.
Alexander Korotkov
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
Don't try to allocate the default value for a string relopt in the same
palloc chunk as the relopt_string struct. That didn't work too well if you
added a built-in string relopt in the stringRelOpts array, as it's not
possible to have an initializer for a variable length struct in C. This
makes the code slightly simpler too.
While we're at it, move the call to validator function in
add_string_reloption to before the allocation, so that if someone does pass
a bogus default value, we don't leak memory.
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
This patch is almost entirely cosmetic --- mostly cleaning up a lot of
neglected comments, and fixing code layout problems in places where the
patch made lines too long and then pgindent did weird things with that.
I did find a bug-of-omission in equalTupleDescs().
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
Split the old typenameTypeId() into two functions: A new typenameTypeId() that
returns only a type OID, and typenameTypeIdAndMod() that returns type OID and
typmod. This isolates call sites better that actually care about the typmod.
to be initialized with proper values. Affected parameters are
fillfactor, analyze_threshold, and analyze_scale_factor.
Especially uninitialized fillfactor caused inefficient page usage
because we built a StdRdOptions struct in which fillfactor is zero
if any reloption is set for the toast table.
In addition, we disallow toast.autovacuum_analyze_threshold and
toast.autovacuum_analyze_scale_factor because we didn't actually
support them; they are always ignored.
Report by Rumko on pgsql-bugs on 12 May 2010.
Analysis by Tom Lane and Alvaro Herrera. Patch by me.
Backpatch to 8.4.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
Attributes can now have options, just as relations and tablespaces do, and
the reloptions code is used to parse, validate, and store them. For
simplicity and because these options are not performance critical, we store
them in a separate cache rather than the main relcache.
Thanks to Alex Hunsaker for the review.
Previously, fastgetattr() and heap_getattr() tested their fourth argument
against a null pointer, but any attempt to use them with a literal-NULL
fourth argument evaluated to *(void *)0, resulting in a compiler error.
Remove these NULL tests to avoid leading future readers of this code to
believe that this has a chance of working. Also clean up related legacy
code in nocachegetattr(), heap_getsysattr(), and nocache_index_getattr().
The new coding standard is that any code which calls a getattr-type
function or macro which takes an isnull argument MUST pass a valid
boolean pointer. Per discussion with Bruce Momjian, Tom Lane, Alvaro
Herrera.
This patch only supports seq_page_cost and random_page_cost as parameters,
but it provides the infrastructure to scalably support many more.
In particular, we may want to add support for effective_io_concurrency,
but I'm leaving that as future work for now.
Thanks to Tom Lane for design help and Alvaro Herrera for the review.
to be just a minor extension of the previous patch that made "x IS NULL"
indexable, because we can treat the IS NOT NULL condition as if it were
"x < NULL" or "x > NULL" (depending on the index's NULLS FIRST/LAST option),
just like IS NULL is treated like "x = NULL". Aside from any possible
usefulness in its own right, this is an important improvement for
index-optimized MAX/MIN aggregates: it is now reliably possible to get
a column's min or max value cheaply, even when there are a lot of nulls
cluttering the interesting end of the index.
This is more in keeping with modern practice, and is a first step towards
porting to Win64 (which has sizeof(pointer) > sizeof(long)).
Tsutomu Yamada, Magnus Hagander, Tom Lane
In the original coding, setting a single reloption would cause default
values to be used for all the other reloptions. This is a problem
particularly for autovacuum reloptions.
Itagaki Takahiro
physical conversion when there are dropped columns in the same places in
the input and output tupdescs. This avoids possible performance loss from
the recent patch to improve dropped-column handling, in some cases where
the old code would have worked.
by supporting conversions in places that used to demand exact rowtype match.
Since this issue is certain to come up elsewhere (in fact, already has,
in ExecEvalConvertRowtype), factor out the support code into new core
functions for tuple conversion. I chose to put these in a new source
file since heaptuple.c is already overly long.
Heavily revised version of a patch by Pavel Stehule.
values being complained of.
In passing, also remove the arbitrary length limitation in the similar
error detail message for foreign key violations.
Itagaki Takahiro
This alters various incidental uses of C++ key words to use other similar
identifiers, so that a C++ compiler won't choke outright. You still
(probably) need extern "C" { }; around the inclusion of backend headers.
based on a patch by Kurt Harriman <harriman@acm.org>
Also add a script cpluspluscheck to check for C++ compatibility in the
future. As of right now, this passes without error for me.
of adding optional namespace and action fields to DefElem. Having three
node types that do essentially the same thing bloats the code and leads
to errors of confusion, such as in yesterday's bug report from Khee Chin.
To implement this without almost duplicating the reloption table, treat
relopt_kind as a bitmask instead of an integer value. This decreases the
range of allowed values, but it's not clear that there's need for that much
values anyway.
This patch also makes heap_reloptions explicitly a no-op for relation kinds
other than heap and TOAST tables.
Patch by ITAGAKI Takahiro with minor edits from me. (In particular I removed
the bit about adding relation kind to an error message, which I intend to
commit separately.)
TupleTableSlots. We have functions for retrieving a minimal tuple from a slot
after storing a regular tuple in it, or vice versa; but these were implemented
by converting the internal storage from one format to the other. The problem
with that is it invalidates any pass-by-reference Datums that were already
fetched from the slot, since they'll be pointing into the just-freed version
of the tuple. The known problem cases involve fetching both a whole-row
variable and a pass-by-reference value from a slot that is fed from a
tuplestore or tuplesort object. The added regression tests illustrate some
simple cases, but there may be other failure scenarios traceable to the same
bug. Note that the added tests probably only fail on unpatched code if it's
built with --enable-cassert; otherwise the bug leads to fetching from freed
memory, which will not have been overwritten without additional conditions.
Fix by allowing a slot to contain both formats simultaneously; which turns out
not to complicate the logic much at all, if anything it seems less contorted
than before.
Back-patch to 8.2, where minimal tuples were introduced.
multiple index entries in a holding area before adding them to the main index
structure. This helps because bulk insert is (usually) significantly faster
than retail insert for GIN.
This patch also removes GIN support for amgettuple-style index scans. The
API defined for amgettuple is difficult to support with fastupdate, and
the previously committed partial-match feature didn't really work with
it either. We might eventually figure a way to put back amgettuple
support, but it won't happen for 8.4.
catversion bumped because of change in GIN's pg_am entry, and because
the format of GIN indexes changed on-disk (there's a metapage now,
and possibly a pending list).
Teodor Sigaev
to 100ms (from 1000). This still seems to be comfortably larger than the
useful range of the parameter, and it should help discourage people from
picking uselessly large values. Tweak the documentation to recommend small
values, too. Per discussion of a couple weeks ago.
per-table overrides of parameters.
This removes a whole class of problems related to misusing the catalog,
and perhaps more importantly, gives us pg_dump support for the parameters.
Based on a patch by Euler Taveira de Oliveira, heavily reworked by me.
qualifier, and add support for this in pg_dump.
This allows TOAST tables to have user-defined fillfactor, and will also
enable us to move the autovacuum parameters to reloptions without taking
away the possibility of setting values for TOAST tables.
refactor the relcache code that used to do that. This allows other callers
(particularly autovacuum) to do the same without necessarily having to open
and lock a table.
fillRelOptions routine that stores the parsed values in the struct using a
table-based approach. Per Tom suggestion. Also remove the "continue"
in HANDLE_*_RELOPTION macros, which were useless and in spirit they were
assuming too much of how the macros were going to be used. (Note that these
macros are now unused, but the intention is to introduce some usage in a
future autovacuum patch, which is why they weren't completely removed.)
Also, do not call the string validation routine when not validating. It seems
less error-prone this way, per commentary on the amoptions SGML docs.
a more complete framework for writing custom option processing routines
by user-defined access methods.
Catalog version bumped due to the general API changes, which are going to
affect user-defined "amoptions" routines.
that a Portal is a useful and sufficient additional argument for
CreateDestReceiver --- it just isn't, in most cases. Instead formalize
the approach of passing any needed parameters to the receiver separately.
One unexpected benefit of this change is that we can declare typedef Portal
in a less surprising location.
This patch is just code rearrangement and doesn't change any functionality.
I'll tackle the HOLD-cursor-vs-toast problem in a follow-on patch.
heap_form_tuple. Since this removes the last remaining caller of
heap_addheader, remove it.
Extracted from the column privileges patch from Stephen Frost, with further
code cleanups by me.
and heap_deformtuple in favor of the newer functions heap_form_tuple et al
(which do the same things but use bool control flags instead of arbitrary
char values). Eliminate the former duplicate coding of these functions,
reducing the deprecated functions to mere wrappers around the newer ones.
We can't get rid of them entirely because add-on modules probably still
contain many instances of the old coding style.
Kris Jurka
default_reloptions(). The previous coding was really a bug because pg_atoi()
will always throw elog on bad input data, whereas default_reloptions is not
supposed to complain about bad input unless its validate parameter is true.
Right now you could only expose the problem by hand-modifying
pg_class.reloptions into an invalid state, so it doesn't seem worth
back-patching; but we should get it right in HEAD because there might be other
situations in future. Noted while studying GIN fast-update patch.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
as those for inherited columns; that is, it's no longer allowed for a child
table to not have a check constraint matching one that exists on a parent.
This satisfies the principle of least surprise (rows selected from the parent
will always appear to meet its check constraints) and eliminates some
longstanding bogosity in pg_dump, which formerly had to guess about whether
check constraints were really inherited or not.
The implementation involves adding conislocal and coninhcount columns to
pg_constraint (paralleling attislocal and attinhcount in pg_attribute)
and refactoring various ALTER TABLE actions to be more like those for
columns.
Alex Hunsaker, Nikhil Sontakke, Tom Lane
strings. This patch introduces four support functions cstring_to_text,
cstring_to_text_with_len, text_to_cstring, and text_to_cstring_buffer, and
two macros CStringGetTextDatum and TextDatumGetCString. A number of
existing macros that provided variants on these themes were removed.
Most of the places that need to make such conversions now require just one
function or macro call, in place of the multiple notational layers that used
to be needed. There are no longer any direct calls of textout or textin,
and we got most of the places that were using handmade conversions via
memcpy (there may be a few still lurking, though).
This commit doesn't make any serious effort to eliminate transient memory
leaks caused by detoasting toasted text objects before they reach
text_to_cstring. We changed PG_GETARG_TEXT_P to PG_GETARG_TEXT_PP in a few
places where it was easy, but much more could be done.
Brendan Jurd and Tom Lane
constraint status of copied indexes (bug #3774), as well as various other
small bugs such as failure to pstrdup when needed. Allow INCLUDING INDEXES
indexes to be merged with identical declared indexes (perhaps not real useful,
but the code is there and having it not apply to LIKE indexes seems pretty
unorthogonal). Avoid useless work in generateClonedIndexStmt(). Undo some
poorly chosen API changes, and put a couple of routines in modules that seem
to be better places for them.
even in code paths where we don't pay any subsequent attention to the typmod
value. This seems needed in view of the fact that 8.3's generalized typmod
support will accept a lot of bogus syntax, such as "timestamp(foo)" or
"record(int, 42)" --- if we allow such things to pass without comment,
users will get confused. Per a recent example from Greg Stark.
To implement this in a way that's not very vulnerable to future
bugs-of-omission, refactor the API of parse_type.c's TypeName lookup routines
so that typmod validation is folded into the base lookup operation. Callers
can still choose not to receive the encoded typmod, but we'll check the
decoration anyway if it's present.
This commit breaks any code that assumes that the mere act of forming a tuple
(without writing it to disk) does not "toast" any fields. While all available
regression tests pass, I'm not totally sure that we've fixed every nook and
cranny, especially in contrib.
Greg Stark with some help from Tom Lane
Get rid of VARATT_SIZE and VARATT_DATA, which were simply redundant with
VARSIZE and VARDATA, and as a consequence almost no code was using the
longer names. Rename the length fields of struct varlena and various
derived structures to catch anyplace that was accessing them directly;
and clean up various places so caught. In itself this patch doesn't
change any behavior at all, but it is necessary infrastructure if we hope
to play any games with the representation of varlena headers.
Greg Stark and Tom Lane
keeping private state in each backend that has inserted and deleted the same
tuple during its current top-level transaction. This is sufficient since
there is no need to be able to determine the cmin/cmax from any other
transaction. This gets us back down to 23-byte headers, removing a penalty
paid in 8.0 to support subtransactions. Patch by Heikki Linnakangas, with
minor revisions by moi, following a design hashed out awhile back on the
pghackers list.
HeapTuple that is no longer allocated as a single palloc() block; if
used carelessly, this might result in a subsequent memory leak after
heap_freetuple().
plpgsql support to come later. Along the way, convert execMain's
SELECT INTO support into a DestReceiver, in order to eliminate some ugly
special cases.
Jonah Harris and Tom Lane
I'm going to insist on reversion of this entire patch unless pgrminclude
is upgraded to a less broken state, but in the meantime let's get contrib
passing regression again.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
tuples with less header overhead than a regular HeapTuple, per my
recent proposal. Teach TupleTableSlot code how to deal with these.
As proof of concept, change tuplestore.c to store MinimalTuples instead
of HeapTuples. Future patches will expand the concept to other places
where it is useful.
by creating a reference-count mechanism, similar to what we did a long time
ago for catcache entries. The back branches have an ugly solution involving
lots of extra copies, but this way is more efficient. Reference counting is
only applied to tupdescs that are actually in caches --- there seems no need
to use it for tupdescs that are generated in the executor, since they'll go
away during plan shutdown by virtue of being in the per-query memory context.
Neil Conway and Tom Lane
that apply the necessary domain constraint checks immediately. This fixes
cases where domain constraints went unchecked for statement parameters,
PL function local variables and results, etc. We can also eliminate existing
special cases for domains in places that had gotten it right, eg COPY.
Also, allow domains over domains (base of a domain is another domain type).
This almost worked before, but was disallowed because the original patch
hadn't gotten it quite right.
functions are not strict, they will be called (passing a NULL first parameter)
during any attempt to input a NULL value of their datatype. Currently, all
our input functions are strict and so this commit does not change any
behavior. However, this will make it possible to build domain input functions
that centralize checking of domain constraints, thereby closing numerous holes
in our domain support, as per previous discussion.
While at it, I took the opportunity to introduce convenience functions
InputFunctionCall, OutputFunctionCall, etc to use in code that calls I/O
functions. This eliminates a lot of grotty-looking casts, but the main
motivation is to make it easier to grep for these places if we ever need
to touch them again.
The original coding stored the raw parser output (ColumnDef and TypeName
nodes) which was ugly, bulky, and wrong because it failed to create any
dependency on the referenced datatype --- and in fact would not track type
renamings and suchlike. Instead store a list of column type OIDs in the
RTE.
Also fix up general failure of recordDependencyOnExpr to do anything sane
about recording dependencies on datatypes. While there are many cases where
there will be an indirect dependency (eg if an operator returns a datatype,
the dependency on the operator is enough), we do have to record the datatype
as a separate dependency in examples like CoerceToDomain.
initdb forced because of change of stored rules.
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
isn't being used anywhere anymore, and there seems no point in a generic
index_keytest() routine when two out of three remaining access methods
aren't using it. Also, add a comment documenting a convention for
letting access methods define private flag bits in ScanKey sk_flags.
There are no such flags at the moment but I'm thinking about changing
btree's handling of "required keys" to use flag bits in the keys
rather than a count of required key positions. Also, if some AM did
still want SK_NEGATE then it would be reasonable to treat it as a private
flag bit.
#define HIGHBIT (0x80)
#define IS_HIGHBIT_SET(ch) ((unsigned char)(ch) & HIGHBIT)
and removed CSIGNBIT and mapped it uses to HIGHBIT. I have also added
uses for IS_HIGHBIT_SET where appropriate. This change is
purely for code clarity.
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
generated from subquery outputs: use the type info stored in the Var
itself. To avoid making ExecEvalVar and slot_getattr more complex
and slower, I split out the whole-row case into a separate ExecEval routine.
type ID information even when it's a record type. This is needed to
handle whole-row Vars referencing subquery outputs. Per example from
Richard Huxton.
polygon operators (<<, &<, >>, &>). Per ideas originally put forward
by andrew@supernews and later rediscovered by moi. This patch just
fixes the existing opclasses, and does not add any new behavior as I
proposed earlier; that can be sorted out later. In principle this
could be back-patched, since it changes only search behavior and not
system catalog entries nor rtree index contents. I'm not currently
planning to do that, though, since I think it could use more testing.
only one argument. (Per recent discussion, the option to accept multiple
arguments is pretty useless for user-defined types, and would be a likely
source of security holes if it was used.) Simplify call sites of
output/send functions to not bother passing more than one argument.
assuming comparison of atttypid is sufficient. In a dropped column
atttypid will be 0, and we'd better check the physical-storage data
to make sure the tupdescs are physically compatible.
I do not believe there is a real risk before 8.0, since before that
we only used this routine to compare successive states of the tupdesc
for a particular relation. But 8.0's typcache.c might be comparing
arbitrary tupdescs so we'd better play it safer.
few palloc's. I also chose to eliminate the restype and restypmod fields
entirely, since they are redundant with information stored in the node's
contained expression; re-examining the expression at need seems simpler
and more reliable than trying to keep restype/restypmod up to date.
initdb forced due to change in contents of stored rules.
convention for isnull flags. Also, remove the useless InsertIndexResult
return struct from index AM aminsert calls --- there is no reason for
the caller to know where in the index the tuple was inserted, and we
were wasting a palloc cycle per insert to deliver this uninteresting
value (plus nontrivial complexity in some AMs).
I forced initdb because of the change in the signature of the aminsert
routines, even though nothing really looks at those pg_proc entries...
of tuples when passing data up through multiple plan nodes. A slot can now
hold either a normal "physical" HeapTuple, or a "virtual" tuple consisting
of Datum/isnull arrays. Upper plan levels can usually just copy the Datum
arrays, avoiding heap_formtuple() and possible subsequent nocachegetattr()
calls to extract the data again. This work extends Atsushi Ogawa's earlier
patch, which provided the key idea of adding Datum arrays to TupleTableSlots.
(I believe however that something like this was foreseen way back in Berkeley
days --- see the old comment on ExecProject.) A test case involving many
levels of join of fairly wide tables (about 80 columns altogether) showed
about 3x overall speedup, though simple queries will probably not be
helped very much.
I have also duplicated some code in heaptuple.c in order to provide versions
of heap_formtuple and friends that use "bool" arrays to indicate null
attributes, instead of the old convention of "char" arrays containing either
'n' or ' '. This provides a better match to the convention used by
ExecEvalExpr. While I have not made a concerted effort to get rid of uses
of the old routines, I think they should be deprecated and eventually removed.
a tuple are being accessed via ExecEvalVar and the attcacheoff shortcut
isn't usable (due to nulls and/or varlena columns). To do this, cache
Datums extracted from a tuple in the associated TupleTableSlot.
Also some code cleanup in and around the TupleTable handling.
Atsushi Ogawa with some kibitzing by Tom Lane.
number of palloc calls. This has a salutory impact on plpgsql operations
with record variables (which create and destroy tupdescs constantly)
and probably helps a bit in some other cases too.
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
to make life cushy for the JDBC driver. Centralize the decision-making
that affects this by inventing a get_type_func_class() function, rather
than adding special cases in half a dozen places.
of a composite type to get that type's OID as their second parameter,
in place of typelem which is useless. The actual changes are mostly
centralized in getTypeInputInfo and siblings, but I had to fix a few
places that were fetching pg_type.typelem for themselves instead of
using the lsyscache.c routines. Also, I renamed all the related variables
from 'typelem' to 'typioparam' to discourage people from assuming that
they necessarily contain array element types.
1. Solve the problem of not having TOAST references hiding inside composite
values by establishing the rule that toasting only goes one level deep:
a tuple can contain toasted fields, but a composite-type datum that is
to be inserted into a tuple cannot. Enforcing this in heap_formtuple
is relatively cheap and it avoids a large increase in the cost of running
the tuptoaster during final storage of a row.
2. Fix some interesting problems in expansion of inherited queries that
reference whole-row variables. We never really did this correctly before,
but it's now relatively painless to solve by expanding the parent's
whole-row Var into a RowExpr() selecting the proper columns from the
child.
If you dike out the preventive check in CheckAttributeType(),
composite-type columns now seem to actually work. However, we surely
cannot ship them like this --- without I/O for composite types, you
can't get pg_dump to dump tables containing them. So a little more
work still to do.
loop over the fields instead of a loop around heap_getattr. This is
considerably faster (O(N) instead of O(N^2)) when there are nulls or
varlena fields, since those prevent use of attcacheoff. Replace loops
over heap_getattr with heap_deformtuple in situations where all or most
of the fields have to be fetched, such as printtup and tuptoaster.
Profiling done more than a year ago shows that this should be a nice
win for situations involving many-column tables.
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
results with tuples as ordinary varlena Datums. This commit does not
in itself do much for us, except eliminate the horrid memory leak
associated with evaluation of whole-row variables. However, it lays the
groundwork for allowing composite types as table columns, and perhaps
some other useful features as well. Per my proposal of a few days ago.
tuptoaster.c --- fields that are compressed in-line are not a reason
to invoke the toaster. Along the way, add a couple more htup.h macros
to eliminate confusing negated tests, and get rid of the already
vestigial TUPLE_TOASTER_ACTIVE symbol.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
target columns in INSERT and UPDATE targetlists. Don't rely on resname
to be accurate in ruleutils, either. This fixes bug reported by
Donald Fraser, in which renaming a column referenced in a rule did not
work very well.
advertised in RowDescription message. Depending on the physical tuple's
column count is not really correct, since according to heap_getattr()
conventions the tuple may be short some columns, which will automatically
get read as nulls. Problem has been latent since forever, but was only
exposed by recent change to skip a projection step in SELECT * FROM...
the type OID and typmod of the underlying base type. Per discussions
a few weeks ago with Andreas Pflug and others. Note that this behavioral
change affects both old- and new-protocol clients.
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
the column by table OID and column number, if it's a simple column
reference. Along the way, get rid of reskey/reskeyop fields in Resdoms.
Turns out that representation was not convenient for either the planner
or the executor; we can make the planner deliver exactly what the
executor wants with no more effort.
initdb forced due to change in stored rule representation.
for tableID/columnID in RowDescription. (The latter isn't really
implemented yet though --- the backend always sends zeroes, and libpq
just throws away the data.)
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
no reason to worry about the tuple commit status bits until the tuple
is inserted in a relation by heapam.c. Also, improve comments for
heap_addheader().
(overlaying low byte of page size) and add HEAP_HASOID bit to t_infomask,
per earlier discussion. Simplify scheme for overlaying fields in tuple
header (no need for cmax to live in more than one place). Don't try to
clear infomask status bits in tqual.c --- not safe to do it there. Don't
try to force output table of a SELECT INTO to have OIDs, either. Get rid
of unnecessarily complex three-state scheme for TupleDesc.tdhasoids, which
has already caused one recent failure. Improve documentation.
column additions, deletions, and renames that would let a child table
get out of sync with its parent. Patch by Alvaro Herrera, with some
kibitzing by Tom Lane.
width types and varlena types, since with the introduction of CSTRING as
a more-or-less-real type, these concepts aren't identical. I've tried to
use varlena consistently to denote datatypes with typlen = -1, ie, they
have a length word and are potentially TOASTable; while the term variable
width covers both varlena and cstring (and, perhaps, someday other types
with other rules for computing the actual width). No code changes in this
commit except for renaming a couple macros.
value '-2' is used to indicate a variable-width type whose width is
computed as strlen(datum)+1. Everything that looks at typlen is updated
except for array support, which Joe Conway is working on; at the moment
it wouldn't work to try to create an array of cstring.
with OPAQUE, as per recent pghackers discussion. I still want to do some
more work on the 'cstring' pseudo-type, but I'm going to commit the bulk
of the changes now before the tree starts shifting under me ...
of functions returning domain types, update documentation for typtype,
move get_typtype to lsyscache.c (actually, resurrect the old version),
add defense against creating pseudo-typed table columns, fix some
bogus list-parsing in grammar. Issues remain with respect to alias
handling and type checking; Joe is on those.
types for Table Functions, as previously proposed on HACKERS. Here is a
brief explanation:
1. Creates a new pg_type typtype: 'p' for pseudo type (currently either
'b' for base or 'c' for catalog, i.e. a class).
2. Creates new builtin type of typtype='p' named RECORD. This is the
first of potentially several pseudo types.
3. Modify FROM clause grammer to accept:
SELECT * FROM my_func() AS m(colname1 type1, colname2 type1, ...)
where m is the table alias, colname1, etc are the column names, and
type1, etc are the column types.
4. When typtype == 'p' and the function return type is RECORD, a list
of column defs is required, and when typtype != 'p', it is
disallowed.
5. A check was added to ensure that the tupdesc provide via the parser
and the actual return tupdesc match in number and type of
attributes.
When creating a function you can do:
CREATE FUNCTION foo(text) RETURNS setof RECORD ...
When using it you can do:
SELECT * from foo(sqlstmt) AS (f1 int, f2 text, f3 timestamp)
or
SELECT * from foo(sqlstmt) AS f(f1 int, f2 text, f3 timestamp)
or
SELECT * from foo(sqlstmt) f(f1 int, f2 text, f3 timestamp)
Included in the patches are adjustments to the regression test sql and
expected files, and documentation.
p.s.
This potentially solves (or at least improves) the issue of builtin
Table Functions. They can be bootstrapped as returning RECORD, and
we can wrap system views around them with properly specified column
defs. For example:
CREATE VIEW pg_settings AS
SELECT s.name, s.setting
FROM show_all_settings()AS s(name text, setting text);
Then we can also add the UPDATE RULE that I previously posted to
pg_settings, and have pg_settings act like a virtual table, allowing
settings to be queried and set.
Joe Conway
code review by Tom Lane. Remaining issues: functions that take or
return tuple types are likely to break if one drops (or adds!)
a column in the table defining the type. Need to think about what
to do here.
Along the way: some code review for recent COPY changes; mark system
columns attnotnull = true where appropriate, per discussion a month ago.
attstattarget to indicate 'use the default'. The default is now a GUC
variable default_statistics_target, and so may be changed on the fly. Along
the way we gain the ability to have pg_dump dump the per-column statistics
target when it's not the default. Patch by Neil Conway, with some kibitzing
from Tom Lane.
bitmap, if present).
Per Tom Lane's suggestion the information whether a tuple has an oid
or not is carried in the tuple descriptor. For debugging reasons
tdhasoid is of type char, not bool. There are predefined values for
WITHOID, WITHOUTOID and UNDEFOID.
This patch has been generated against a cvs snapshot from last week
and I don't expect it to apply cleanly to current sources. While I
post it here for public review, I'm working on a new version against a
current snapshot. (There's been heavy activity recently; hope to
catch up some day ...)
This is a long patch; if it is too hard to swallow, I can provide it
in smaller pieces:
Part 1: Accessor macros
Part 2: tdhasoid in TupDesc
Part 3: Regression test
Part 4: Parameter withoid to heap_addheader
Part 5: Eliminate t_oid from HeapTupleHeader
Part 2 is the most hairy part because of changes in the executor and
even in the parser; the other parts are straightforward.
Up to part 4 the patched postmaster stays binary compatible to
databases created with an unpatched version. Part 5 is small (100
lines) and finally breaks compatibility.
Manfred Koizar
two small changes to the API since last patch, which hopefully completes
the decoupling of composite function support from SRF specific support.
Joe Conway
HeapTupleHeaderData in setter and getter macros called
HeapTupleHeaderGetXmin, HeapTupleHeaderSetXmin etc.
It also introduces a "virtual" field xvac by defining
HeapTupleHeaderGetXvac and HeapTupleHeaderSetXvac. Xvac is used by
VACUUM, in fact it is stored in t_cmin.
Manfred Koizar
where the latter is made slightly larger to allow for in-memory tuples
containing resjunk attributes. Responds to today's complaint that one
cannot UPDATE a table containing the allegedly-legal maximum number of
columns.
Also, apply Manfred Koizar's recent patch to avoid extra alignment padding
when there is a null bitmap. This saves bytes in some cases while not
creating any backward-compatibility problem AFAICS.
yesterday's proposal to pghackers. Also remove unnecessary parameters
to heap_beginscan, heap_rescan. I modified pg_proc.h to reflect the
new numbers of parameters for the AM interface routines, but did not
force an initdb because nothing actually looks at those fields.
are now both invoked once per received SQL command (raw parsetree) from
pg_exec_query_string. BeginCommand is actually just an empty routine
at the moment --- all its former operations have been pushed into tuple
receiver setup routines in printtup.c. This makes for a clean distinction
between BeginCommand/EndCommand (once per command) and the tuple receiver
setup/teardown routines (once per ExecutorRun call), whereas the old code
was quite ad hoc. Along the way, clean up the calling conventions for
ExecutorRun a little bit.
lookup info in the relcache for index access method support functions.
This makes a huge difference for dynamically loaded support functions,
and should save a few cycles even for built-in ones. Also tweak dfmgr.c
so that load_external_function is called only once, not twice, when
doing fmgr_info for a dynamically loaded function. All per performance
gripe from Teodor Sigaev, 5-Oct-01.
per previous discussion on pghackers. Most of the duplicate code in
different AMs' ambuild routines has been moved out to a common routine
in index.c; this means that all index types now do the right things about
inserting recently-dead tuples, etc. (I also removed support for EXTEND
INDEX in the ambuild routines, since that's about to go away anyway, and
it cluttered the code a lot.) The retail indextuple deletion routines have
been replaced by a "bulk delete" routine in which the indexscan is inside
the access method. I haven't pushed this change as far as it should go yet,
but it should allow considerable simplification of the internal bookkeeping
for deletions. Also, add flag columns to pg_am to eliminate various
hardcoded tests on AM OIDs, and remove unused pg_am columns.
Fix rtree and gist index types to not attempt to store NULLs; before this,
gist usually crashed, while rtree managed not to crash but computed wacko
bounding boxes for NULL entries (which might have had something to do with
the performance problems we've heard about occasionally).
Add AtEOXact routines to hash, rtree, and gist, all of which have static
state that needs to be reset after an error. We discovered this need long
ago for btree, but missed the other guys.
Oh, one more thing: concurrent VACUUM is now the default.
IS TRUE, etc, with some degree of verisimilitude. Split out
selectivity support functions from builtins.h into a new header
file selfuncs.h, so as to reduce the number of header files builtins.h
must depend on. Fix a few missing inclusions exposed thereby.
From Joe Conway, with some kibitzing from Tom Lane.
pg_database now has unique indexes on oid and on datname.
pg_shadow now has unique indexes on usename and on usesysid.
pg_am now has unique index on oid.
pg_opclass now has unique index on oid.
pg_amproc now has unique index on amid+amopclaid+amprocnum.
Remove pg_rewrite's unnecessary index on oid, delete unused RULEOID syscache.
Remove index on pg_listener and associated syscache for performance reasons
(caching rows that are certain to change before you need 'em again is
rather pointless).
Change pg_attrdef's nonunique index on adrelid into a unique index on
adrelid+adnum.
Fix various incorrect settings of pg_class.relisshared, make that the
primary reference point for whether a relation is shared or not.
IsSharedSystemRelationName() is now only consulted to initialize relisshared
during initial creation of tables and indexes. In theory we might now
support shared user relations, though it's not clear how one would get
entries for them into pg_class &etc of multiple databases.
Fix recently reported bug that pg_attribute rows created for an index all have
the same OID. (Proof that non-unique OID doesn't matter unless it's
actually used to do lookups ;-))
There's no need to treat pg_trigger, pg_attrdef, pg_relcheck as bootstrap
relations. Convert them into plain system catalogs without hardwired
entries in pg_class and friends.
Unify global.bki and template1.bki into a single init script postgres.bki,
since the alleged distinction between them was misleading and pointless.
Not to mention that it didn't work for setting up indexes on shared
system relations.
Rationalize locking of pg_shadow, pg_group, pg_attrdef (no need to use
AccessExclusiveLock where ExclusiveLock or even RowExclusiveLock will do).
Also, hold locks until transaction commit where necessary.
report on old-style functions invoked by RI triggers. We had a number of
other places that were being sloppy about which memory context FmgrInfo
subsidiary data will be allocated in. Turns out none of them actually
cause a problem in 7.1, but this is for arcane reasons such as the fact
that old-style triggers aren't supported anyway. To avoid getting burnt
later, I've restructured the trigger support so that we don't keep trigger
FmgrInfo structs in relcache memory. Some other related cleanups too:
it's not really necessary to call fmgr_info at all while setting up
the index support info in relcache entries, because those ScanKeyEntry
structs are never used to invoke the functions. This should speed up
relcache initialization a tiny bit.
a separate statement (though it can still be invoked as part of VACUUM, too).
pg_statistic redesigned to be more flexible about what statistics are
stored. ANALYZE now collects a list of several of the most common values,
not just one, plus a histogram (not just the min and max values). Random
sampling is used to make the process reasonably fast even on very large
tables. The number of values and histogram bins collected is now
user-settable via an ALTER TABLE command.
There is more still to do; the new stats are not being used everywhere
they could be in the planner. But the remaining changes for this project
should be localized, and the behavior is already better than before.
A not-very-related change is that sorting now makes use of btree comparison
routines if it can find one, rather than invoking '<' twice.
compressed storage works perfectly well. Might as well have a coherent
strategy for applying it, rather than the haphazard store-what-you-get
approach that was in the code before. The strategy I've set up here is
to attempt compression of any compressible index value exceeding
BLCKSZ/16, or about 500 bytes by default.
1. Distinguish cases where a Datum representing a tuple datatype is an OID
from cases where it is a pointer to TupleTableSlot, and make sure we use
the right typlen in each case.
2. Make fetchatt() and related code support 8-byte by-value datatypes on
machines where Datum is 8 bytes. Centralize knowledge of the available
by-value datatype sizes in two macros in tupmacs.h, so that this will be
easier if we ever have to do it again.
both MULTIBYTE and TOAST prevent char(n) from being truly fixed-size.
Simplify and speed up fastgetattr() and index_getattr() macros by
eliminating special cases for attnum=1. It's just as fast to handle
the first attribute by presetting its attcacheoff to zero; so do that
instead when loading the tupledesc in relcache.c.
maintained for each cache entry. A cache entry will not be freed until
the matching ReleaseSysCache call has been executed. This eliminates
worries about cache entries getting dropped while still in use. See
my posting to pg-hackers of even date for more info.
Context diff this time.
Remove -m486 compile args for FreeBSD-i386, compile -O2 on i386.
Compile with only -O on alpha for codegen safety.
Make the port use the TEST_AND_SET for alpha and i386 on FreeBSD.
Fix a lot of bogus string formats for outputting pointers (cast to int
and %u/%x replaced with no cast and %p), and 'Size'(size_t) are now
cast to 'unsigned long' and output with %lu/
Remove an unused variable.
Alfred Perlstein
(WAL logging for this is not done yet, however.) Clean up a number of really
crufty things that are no longer needed now that DROP behaves nicely. Make
temp table mapper do the right things when drop or rename affecting a temp
table is rolled back. Also, remove "relation modified while in use" error
check, in favor of locking tables at first reference and holding that lock
throughout the statement.
key call sites are changed, but most called functions are still oldstyle.
An exception is that the PL managers are updated (so, for example, NULL
handling now behaves as expected in plperl and plpgsql functions).
NOTE initdb is forced due to added column in pg_proc.
project I am working on (Recall - a distributed, fault-tolerant,
replicated, storage framework @ http://www.fault-tolerant.org).
Recall is written in C++. I need to include the postgres headers and
there are some problems when including the headers w/C++.
Attached is a patch generated from postgres/src that fixes my problems.
I was hoping to get this into the main source. It's very small (2k) and
3 files are changed: backend/utils/fmgr/fmgr.c,
backend/utils/Gen_fmgrtab.sh.in, and include/access/tupdesc.h.
In C++, you get a multiply defined symbol because the variable
(FmgrInfo *fmgr_pl_finfo) is defined in the header (the patch moves it
to the .c file). The other problem in tupdesc.h is the use of typeid
is a problem in c++ (I renamed it to oidtypeid).
Thanks,
Neal Norwitz
syscache and relcache flushes). Relcache entry rebuild now preserves
original tupledesc, rewrite rules, and triggers if possible, so that pointers
to these things remain valid --- if these things change while relcache entry
has positive refcount, we elog(ERROR) to avoid later crash. Arrange for
xact-local rels to be rebuilt when an SI inval message is seen for them,
so that they are updated by CommandCounterIncrement the same as regular rels.
(This is useful because of Hiroshi's recent changes to process our own SI
messages at CommandCounterIncrement time.) This allows simplification of
some routines that previously hacked around the lack of an automatic update.
catcache now keeps its own copy of tupledesc for its relation, rather than
depending on the relcache's copy; this avoids needing to reinitialize catcache
during a cache flush, which saves some cycles and eliminates nasty circularity
problems that occur if a cache flush happens while trying to initialize a
catcache.
Eliminate a number of permanent memory leaks that used to happen during
catcache or relcache flush; not least of which was that catcache never
freed any cached tuples! (Rule parsetree storage is still leaked, however;
will fix that separately.)
Nothing done yet about code that uses tuples retrieved by SearchSysCache
for longer than is safe.
Make all system indexes unique.
Make all cache loads use system indexes.
Rename *rel to *relid in inheritance tables.
Rename cache names to be clearer.
expressions in CREATE TABLE. There is no longer an emasculated expression
syntax for these things; it's full a_expr for constraints, and b_expr
for defaults (unfortunately the fact that NOT NULL is a part of the
column constraint syntax causes a shift/reduce conflict if you try a_expr.
Oh well --- at least parenthesized boolean expressions work now). Also,
stored expression for a column default is not pre-coerced to the column
type; we rely on transformInsertStatement to do that when the default is
actually used. This means "f1 datetime default 'now'" behaves the way
people usually expect it to.
BTW, all the support code is now there to implement ALTER TABLE ADD
CONSTRAINT and ALTER TABLE ADD COLUMN with a default value. I didn't
actually teach ALTER TABLE to call it, but it wouldn't be much work.
this one could be useful for people experiencing out-of-memory crashes while
executing queries which retrieve or use a very large number of tuples.
The problem happens when storage is allocated for functions results used in
a large query, for example:
select upper(name) from big_table;
select big_table.array[1] from big_table;
select count(upper(name)) from big_table;
This patch is a dirty hack that fixes the out-of-memory problem for the most
common cases, like the above ones. It is not the final solution for the
problem but it can work for some people, so I'm posting it.
The patch should be safe because all changes are under #ifdef. Furthermore
the feature can be enabled or disabled at runtime by the `free_tuple_memory'
options in the pg_options file. The option is disabled by default and must
be explicitly enabled at runtime to have any effect.
To enable the patch add the follwing line to Makefile.custom:
CUSTOM_COPT += -DFREE_TUPLE_MEMORY
To enable the option at runtime add the following line to pg_option:
free_tuple_memory=1
Massimo
can be generated in a buffer and then sent to the frontend in a single
libpq call. This solves problems with NOTICE and ERROR messages generated
in the middle of a data message or COPY OUT operation.
Alvaro Herrera
Bruce Momjian
Peter Eisentraut
Robert Haas
Tom Lane
Heikki Linnakangas
Magnus Hagander
Itagaki Takahiro
Andrew Dunstan
Neil Conway
PostgreSQL Daemon
Jan Wieck