There's no real point in not doing this. It doesn't cost anything
in performance or space. So let's go wild.
Andres Freund, with substantial editing as to style by me.
When this reloption is set and wal_level=logical is configured,
we'll record the CIDs stamped by inserts, updates, and deletes to
the table just as we would for an actual catalog table. This will
allow logical decoding to use historical MVCC snapshots to access
such tables just as they access ordinary catalog tables.
Replication solutions built around the logical decoding machinery
will likely need to set this operation for their configuration
tables; it might also be needed by extensions which perform table
access in their output functions.
Andres Freund, reviewed by myself and others.
When wal_level=logical, we'll log columns from the old tuple as
configured by the REPLICA IDENTITY facility added in commit
07cacba983. This makes it possible
a properly-configured logical replication solution to correctly
follow table updates even if they change the chosen key columns,
or, with REPLICA IDENTITY FULL, even if the table has no key at
all. Note that updates which do not modify the replica identity
column won't log anything extra, making the choice of a good key
(i.e. one that will rarely be changed) important to performance
when wal_level=logical is configured.
Each insert, update, or delete to a catalog table will also log
the CMIN and/or CMAX values of stamped by the current transaction.
This is necessary because logical decoding will require access to
historical snapshots of the catalog in order to decode some data
types, and the CMIN/CMAX values that we may need in order to judge
row visibility may have been overwritten by the time we need them.
Andres Freund, reviewed in various versions by myself, Heikki
Linnakangas, KONDO Mitsumasa, and many others.
An expression such as WHERE (... x IN (SELECT ...) ...) IN (SELECT ...)
could produce an invalid plan that results in a crash at execution time,
if the planner attempts to flatten the outer IN into a semi-join.
This happens because convert_testexpr() was not expecting any nested
SubLinks and would wrongly replace any PARAM_SUBLINK Params belonging
to the inner SubLink. (I think the comment denying that this case could
happen was wrong when written; it's certainly been wrong for quite a long
time, since very early versions of the semijoin flattening logic.)
Per report from Teodor Sigaev. Back-patch to all supported branches.
SQL-standard TABLE() is a subset of UNNEST(); they deal with arrays and
other collection types. This feature, however, deals with set-returning
functions. Use a different syntax for this feature to keep open the
possibility of implementing the standard TABLE().
This sets up ECDH key exchange, when compiling against OpenSSL that
supports EC. Then the ECDHE-RSA and ECDHE-ECDSA cipher suites can be
used for SSL connections. The latter one means that EC keys are now
usable.
The reason for EC key exchange is that it's faster than DHE and it
allows to go to higher security levels where RSA will be horribly slow.
There is also new GUC option ssl_ecdh_curve that specifies the curve
name used for ECDH. It defaults to "prime256v1", which is the most
common curve in use in HTTPS.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
By default, OpenSSL (and SSL/TLS in general) lets the client cipher
order take priority. This is OK for browsers where the ciphers were
tuned, but few PostgreSQL client libraries make the cipher order
configurable. So it makes sense to have the cipher order in
postgresql.conf take priority over client defaults.
This patch adds the setting "ssl_prefer_server_ciphers" that can be
turned on so that server cipher order is preferred. Per discussion,
this now defaults to on.
From: Marko Kreen <markokr@gmail.com>
Reviewed-by: Adrian Klaver <adrian.klaver@gmail.com>
In 247c76a989, I added some code to do fine-grained checking of
MultiXact status of locking/updating transactions when traversing an
update chain. There was a thinko in that patch which would have the
traversing abort, that is return HeapTupleUpdated, when the other
transaction is a committed lock-only. In this case we should ignore it
and return success instead. Of course, in the case where there is a
committed update, HeapTupleUpdated is the correct return value.
A user-visible symptom of this bug is that in REPEATABLE READ and
SERIALIZABLE transaction isolation modes spurious serializability errors
can occur:
ERROR: could not serialize access due to concurrent update
In order for this to happen, there needs to be a tuple that's key-share-
locked and also updated, and the update must abort; a subsequent
transaction trying to acquire a new lock on that tuple would abort with
the above error. The reason is that the initial FOR KEY SHARE is seen
as committed by the new locking transaction, which triggers this bug.
(If the UPDATE commits, then the serialization error is correctly
reported.)
When running a query in READ COMMITTED mode, what happens is that the
locking is aborted by the HeapTupleUpdated return value, then
EvalPlanQual fetches the newest version of the tuple, which is then the
only version that gets locked. (The second time the tuple is checked
there is no misbehavior on the committed lock-only, because it's not
checked by the code that traverses update chains; so no bug.) Only the
newest version of the tuple is locked, not older ones, but this is
harmless.
The isolation test added by this commit illustrates the desired
behavior, including the proper serialization errors that get thrown.
Backpatch to 9.3.
Current OpenSSL code includes a BIO_clear_retry_flags() step in the
sock_write() function. Either we failed to copy the code correctly, or
they added this since we copied it. In any case, lack of the clear step
appears to be the cause of the server lockup after connection loss reported
in bug #8647 from Valentine Gogichashvili. Assume that this is correct
coding for all OpenSSL versions, and hence back-patch to all supported
branches.
Diagnosis and patch by Alexander Kukushkin.
HeapTupleSatisfiesUpdate can very easily "forget" tuple locks while
checking the contents of a multixact and finding it contains an aborted
update, by setting the HEAP_XMAX_INVALID bit. This would lead to
concurrent transactions not noticing any previous locks held by
transactions that might still be running, and thus being able to acquire
subsequent locks they wouldn't be normally able to acquire.
This bug was introduced in commit 1ce150b7bb; backpatch this fix to 9.3,
like that commit.
This change reverts the change to the delete-abort-savept isolation test
in 1ce150b7bb, because that behavior change was caused by this bug.
Noticed by Andres Freund while investigating a different issue reported
by Noah Misch.
Insertion to a non-leaf GIN page didn't make a full-page image of the page,
which is wrong. The code used to do it correctly, but was changed (commit
853d1c3103) because the redo-routine didn't
track incomplete splits correctly when the page was restored from a full
page image. Of course, that was not right way to fix it, the redo routine
should've been fixed instead. The redo-routine was surreptitiously fixed
in 2010 (commit 4016bdef8a), so all we need
to do now is revert the code that creates the record to its original form.
This doesn't change the format of the WAL record.
Backpatch to all supported versions.
When an external recovery command such as restore_command or
archive_cleanup_command fails, report the exit code properly,
distinguishing signals and normal exists, using the existing
wait_result_to_str() facility, instead of just reporting the return
value from system().
Reviewed-by: Peter Geoghegan <pg@heroku.com>
Remove the variable from the enclosing scopes so that nothing can be
relying on it. The net result of this refactoring is that we get rid
of a few unnecessary strlen() calls.
Original patch from Greg Jaskiewicz, substantially expanded by me.
If errordata_stack_depth < 0, we won't find that out and correct the
problem until CHECK_STACK_DEPTH() is invoked. In the meantime,
elevel will be set based on an invalid read. This is probably
harmless in practice, but it seems cleaner this way.
Xi Wang
Both heap_freeze_tuple() and heap_tuple_needs_freeze() neglected to look
into a multixact to check the members against cutoff_xid. This means
that a very old Xid could survive hidden within a multi, possibly
outliving its CLOG storage. In the distant future, this would cause
clog lookup failures:
ERROR: could not access status of transaction 3883960912
DETAIL: Could not open file "pg_clog/0E78": No such file or directory.
This mostly was problematic when the updating transaction aborted, since
in that case the row wouldn't get pruned away earlier in vacuum and the
multixact could possibly survive for a long time. In many cases, data
that is inaccessible for this reason way can be brought back
heuristically.
As a second bug, heap_freeze_tuple() didn't properly handle multixacts
that need to be frozen according to cutoff_multi, but whose updater xid
is still alive. Instead of preserving the update Xid, it just set Xmax
invalid, which leads to both old and new tuple versions becoming
visible. This is pretty rare in practice, but a real threat
nonetheless. Existing corrupted rows, unfortunately, cannot be repaired
in an automated fashion.
Existing physical replicas might have already incorrectly frozen tuples
because of different behavior than in master, which might only become
apparent in the future once pg_multixact/ is truncated; it is
recommended that all clones be rebuilt after upgrading.
Following code analysis caused by bug report by J Smith in message
CADFUPgc5bmtv-yg9znxV-vcfkb+JPRqs7m2OesQXaM_4Z1JpdQ@mail.gmail.com
and privately by F-Secure.
Backpatch to 9.3, where freezing of MultiXactIds was introduced.
Analysis and patch by Andres Freund, with some tweaks by Álvaro.
It is dangerous to do so, because some code expects to be able to see what's
the true Xmax even if it is aborted (particularly while traversing HOT
chains). So don't do it, and instead rely on the callers to verify for
abortedness, if necessary.
Several race conditions and bugs fixed in the process. One isolation test
changes the expected output due to these.
This also reverts commit c235a6a589, which is no longer necessary.
Backpatch to 9.3, where this function was introduced.
Andres Freund
Commit 9dc842f08 of 8.2 era prevented MultiXact truncation during crash
recovery, because there was no guarantee that enough state had been
setup, and because it wasn't deemed to be a good idea to remove data
during crash recovery anyway. Since then, due to Hot-Standby, streaming
replication and PITR, the amount of time a cluster can spend doing crash
recovery has increased significantly, to the point that a cluster may
even never come out of it. This has made not truncating the content of
pg_multixact/ not defensible anymore.
To fix, take care to setup enough state for multixact truncation before
crash recovery starts (easy since checkpoints contain the required
information), and move the current end-of-recovery actions to a new
TrimMultiXact() function, analogous to TrimCLOG().
At some later point, this should probably done similarly to the way
clog.c is doing it, which is to just WAL log truncations, but we can't
do that for the back branches.
Back-patch to 9.0. 8.4 also has the problem, but since there's no hot
standby there, it's much less pressing. In 9.2 and earlier, this patch
is simpler than in newer branches, because multixact access during
recovery isn't required. Add appropriate checks to make sure that's not
happening.
Andres Freund
While autovacuum dutifully launched anti-multixact-wraparound vacuums
when the multixact "age" was reached, the vacuum code was not aware that
it needed to make them be full table vacuums. As the resulting
partial-table vacuums aren't capable of actually increasing relminmxid,
autovacuum continued to launch anti-wraparound vacuums that didn't have
the intended effect, until age of relfrozenxid caused the vacuum to
finally be a full table one via vacuum_freeze_table_age.
To fix, introduce logic for multixacts similar to that for plain
TransactionIds, using the same GUCs.
Backpatch to 9.3, where permanent MultiXactIds were introduced.
Andres Freund, some cleanup by Álvaro
Parts of the code used autovacuum_freeze_max_age to determine whether
anti-multixact-wraparound vacuums are necessary, while others used a
hardcoded 200000000 value. This leads to problems when
autovacuum_freeze_max_age is set to a non-default value. Use the latter
everywhere.
Backpatch to 9.3, where vacuuming of multixacts was introduced.
Andres Freund
The various places that transferred fast-path locks to the main lock table
neglected to release the PGPROC's backendLock if SetupLockInTable failed
due to being out of shared memory. In most cases this is no big deal since
ensuing error cleanup would release all held LWLocks anyway. But there are
some hot-standby functions that don't consider failure of
FastPathTransferRelationLocks to be a hard error, and in those cases this
oversight could lead to system lockup. For consistency, make all of these
places look the same as FastPathTransferRelationLocks.
Noted while looking for the cause of Dan Wood's bugs --- this wasn't it,
but it's a bug anyway.
Prevent handle_sig_alarm from losing control partway through due to a query
cancel (either an asynchronous SIGINT, or a cancel triggered by one of the
timeout handler functions). That would at least result in failure to
schedule any required future interrupt, and might result in actual
corruption of timeout.c's data structures, if the interrupt happened while
we were updating those.
We could still lose control if an asynchronous SIGINT arrives just as the
function is entered. This wouldn't break any data structures, but it would
have the same effect as if the SIGALRM interrupt had been silently lost:
we'd not fire any currently-due handlers, nor schedule any new interrupt.
To forestall that scenario, forcibly reschedule any pending timer interrupt
during AbortTransaction and AbortSubTransaction. We can avoid any extra
kernel call in most cases by not doing that until we've allowed
LockErrorCleanup to kill the DEADLOCK_TIMEOUT and LOCK_TIMEOUT events.
Another hazard is that some platforms (at least Linux and *BSD) block a
signal before calling its handler and then unblock it on return. When we
longjmp out of the handler, the unblock doesn't happen, and the signal is
left blocked indefinitely. Again, we can fix that by forcibly unblocking
signals during AbortTransaction and AbortSubTransaction.
These latter two problems do not manifest when the longjmp reaches
postgres.c, because the error recovery code there kills all pending timeout
events anyway, and it uses sigsetjmp(..., 1) so that the appropriate signal
mask is restored. So errors thrown outside any transaction should be OK
already, and cleaning up in AbortTransaction and AbortSubTransaction should
be enough to fix these issues. (We're assuming that any code that catches
a query cancel error and doesn't re-throw it will do at least a
subtransaction abort to clean up; but that was pretty much required already
by other subsystems.)
Lastly, ProcSleep should not clear the LOCK_TIMEOUT indicator flag when
disabling that event: if a lock timeout interrupt happened after the lock
was granted, the ensuing query cancel is still going to happen at the next
CHECK_FOR_INTERRUPTS, and we want to report it as a lock timeout not a user
cancel.
Per reports from Dan Wood.
Back-patch to 9.3 where the new timeout handling infrastructure was
introduced. We may at some point decide to back-patch the signal
unblocking changes further, but I'll desist from that until we hear
actual field complaints about it.
Although user-defined relations can't be directly created in
pg_catalog, it's possible for them to end up there, because you can
create them in some other schema and then use ALTER TABLE .. SET SCHEMA
to move them there. Previously, such relations couldn't afterwards
be manipulated, because IsSystemRelation()/IsSystemClass() rejected
all attempts to modify objects in the pg_catalog schema, regardless
of their origin. With this patch, they now reject only those
objects in pg_catalog which were created at initdb-time, allowing
most operations on user-created tables in pg_catalog to proceed
normally.
This patch also adds new functions IsCatalogRelation() and
IsCatalogClass(), which is similar to IsSystemRelation() and
IsSystemClass() but with a slightly narrower definition: only TOAST
tables of system catalogs are included, rather than *all* TOAST tables.
This is currently used only for making decisions about when
invalidation messages need to be sent, but upcoming logical decoding
patches will find other uses for this information.
Andres Freund, with some modifications by me.
In the GIN incomplete-splits patch, I used BlockIdDatas to store the block
number of left and right children, when inserting a downlink after a split
to an internal page posting list page. But gin_desc thought they were stored
as BlockNumbers.
We have for a long time checked the head pointer of each of the backend's
proclock lists and skipped acquiring the corresponding locktable partition
lock if the head pointer was NULL. This was safe enough in the days when
proclock lists were changed only by the owning backend, but it is pretty
questionable now that the fast-path patch added cases where backends add
entries to other backends' proclock lists. However, we don't really wish
to revert to locking each partition lock every time, because in simple
transactions that would add a lot of useless lock/unlock cycles on
already-heavily-contended LWLocks. Fortunately, the only way that another
backend could be modifying our proclock list at this point would be if it
was promoting a formerly fast-path lock of ours; and any such lock must be
one that we'd decided not to delete in the previous loop over the locallock
table. So it's okay if we miss seeing it in this loop; we'd just decide
not to delete it again. However, once we've detected a non-empty list,
we'd better re-fetch the list head pointer after acquiring the partition
lock. This guards against possibly fetching a corrupt-but-non-null pointer
if pointer fetch/store isn't atomic. It's not clear if any practical
architectures are like that, but we've never assumed that before and don't
wish to start here. In any case, the situation certainly deserves a code
comment.
While at it, refactor the partition traversal loop to use a for() construct
instead of a while() loop with goto's.
Back-patch, just in case the risk is real and not hypothetical.
Instead of simply checking the KEYS_UPDATED bit, we need to check
whether each lock held on the future version of the tuple conflicts with
the lock we're trying to acquire.
Per bug report #8434 by Tomonari Katsumata
Not doing so causes us to traverse an update chain that has been broken
by concurrent page pruning. All other code that traverses update chains
uses this check as one of the cases in which to stop iterating, so
replicate it here too. Failure to do so leads to erroneous CLOG,
subtrans or multixact lookups.
Per discussion following the bug report by J Smith in
CADFUPgc5bmtv-yg9znxV-vcfkb+JPRqs7m2OesQXaM_4Z1JpdQ@mail.gmail.com
as diagnosed by Andres Freund.
If a transaction updates/deletes a tuple just before aborting, and a
concurrent transaction tries to prune the page concurrently, the pruner
may see HeapTupleSatisfiesVacuum return HEAPTUPLE_DELETE_IN_PROGRESS,
but a later call to HeapTupleGetUpdateXid() return InvalidXid. This
would cause an assertion failure in development builds, but would be
otherwise Mostly Harmless.
Fix by checking whether the updater Xid is valid before trying to apply
it as page prune point.
Reported by Andres in 20131124000203.GA4403@alap2.anarazel.de
The reason for the fetch failure is that the tuple was removed because
it was dead; so the failure is innocuous and can be ignored. Moreover,
there's no need for further work and we can return success to the caller
immediately. EvalPlanQualFetch is doing something very similar to this
already.
Report and test case from Andres Freund in
20131124000203.GA4403@alap2.anarazel.de
When acquiring a lock in fast-path mode, we must reset the locallock
object's lock and proclock fields to NULL. They are not necessarily that
way to start with, because the locallock could be left over from a failed
lock acquisition attempt earlier in the transaction. Failure to do this
led to all sorts of interesting misbehaviors when LockRelease tried to
clean up no-longer-related lock and proclock objects in shared memory.
Per report from Dan Wood.
In passing, modify LockRelease to elog not just Assert if it doesn't find
lock and proclock objects for a formerly fast-path lock, matching the code
in FastPathGetRelationLockEntry and LockRefindAndRelease. This isn't a
bug but it will help in diagnosing any future bugs in this area.
Also, modify FastPathTransferRelationLocks and FastPathGetRelationLockEntry
to break out of their loops over the fastpath array once they've found the
sole matching entry. This was inconsistently done in some search loops
and not others.
Improve assorted related comments, too.
Back-patch to 9.2 where the fast-path mechanism was introduced.
Correct an obsolete statement that no backend touches another backend's
PROCLOCK lists. This was probably wrong even when written (the deadlock
checker looks at everybody's lists), and it's certainly quite wrong now
that fast-path locking can require creation of lock and proclock objects
on behalf of another backend. Also improve some statements in the hot
standby explanation, and do one or two other trivial bits of wordsmithing/
reformatting.
Replace it with an approach similar to what GiST uses: when a page is split,
the left sibling is marked with a flag indicating that the parent hasn't been
updated yet. When the parent is updated, the flag is cleared. If an insertion
steps on a page with the flag set, it will finish split before proceeding
with the insertion.
The post-recovery cleanup mechanism was never totally reliable, as insertion
to the parent could fail e.g because of running out of memory or disk space,
leaving the tree in an inconsistent state.
This also divides the responsibility of WAL-logging more clearly between
the generic ginbtree.c code, and the parts specific to entry and posting
trees. There is now a common WAL record format for insertions and deletions,
which is written by ginbtree.c, followed by tree-specific payload, which is
returned by the placetopage- and split- callbacks.
Separate the insertion payload from the more static portions of GinBtree.
GinBtree now only contains information related to searching the tree, and
the information of what to insert is passed separately.
Add root block number to GinBtree, instead of passing it around all the
functions as argument.
Split off ginFinishSplit() from ginInsertValue(). ginFinishSplit is
responsible for finding the parent and inserting the downlink to it.
Vacuum recognizes that it can update relfrozenxid by checking whether it has
processed all pages of a relation. Unfortunately it performed that check
after truncating the dead pages at the end of the relation, and used the new
number of pages to decide whether all pages have been scanned. If the new
number of pages happened to be smaller or equal to the number of pages
scanned, it incorrectly decided that all pages were scanned.
This can lead to relfrozenxid being updated, even though some pages were
skipped that still contain old XIDs. That can lead to data loss due to xid
wraparounds with some rows suddenly missing. This likely has escaped notice
so far because it takes a large number (~2^31) of xids being used to see the
effect, while a full-table vacuum before that would fix the issue.
The incorrect logic was introduced by commit
b4b6923e03. Backpatch this fix down to 8.4,
like that commit.
Andres Freund, with some modifications by me.
Reviewed-by: Ali Dar <ali.munir.dar@gmail.com>
Reviewed-by: Amit Khandekar <amit.khandekar@enterprisedb.com>
Reviewed-by: Rodolfo Campero <rodolfo.campero@anachronics.com>
Change SET LOCAL/CONSTRAINTS/TRANSACTION behavior outside of a
transaction block from error (post-9.3) to warning. (Was nothing in <=
9.3.) Also change ABORT outside of a transaction block from notice to
warning.
Previously, messages were emitted at the LOG level every time a
backend preloaded a library. That was acceptable (though unnecessary)
for shared_preload_libraries; but it was excessive for
local_preload_libraries and session_preload_libraries. Reduce to
DEBUG1.
Also, there was logic in the EXEC_BACKEND case to avoid repeated
messages for shared_preload_libraries by demoting them to
DEBUG2. DEBUG1 seems more appropriate there, as well, so eliminate
that special case.
Peter Geoghegan.
These functions must be careful that they return the intended value of
errno to their callers. There were several scenarios where this might
not happen:
1. The recent SSL renegotiation patch added a hunk of code that would
execute after setting errno. In the first place, it's doubtful that we
should consider renegotiation to be successfully completed after a failure,
and in the second, there's no real guarantee that the called OpenSSL
routines wouldn't clobber errno. Fix by not executing that hunk except
during success exit.
2. errno was left in an unknown state in case of an unrecognized return
code from SSL_get_error(). While this is a "can't happen" case, it seems
like a good idea to be sure we know what would happen, so reset errno to
ECONNRESET in such cases. (The corresponding code in libpq's fe-secure.c
already did this.)
3. There was an (undocumented) assumption that client_read_ended() wouldn't
change errno. While true in the current state of the code, this seems less
than future-proof. Add explicit saving/restoring of errno to make sure
that changes in the called functions won't break things.
I see no need to back-patch, since #1 is new code and the other two issues
are mostly hypothetical.
Per discussion with Amit Kapila.
The previous coding labeled expressions such as pg_index.indkey[1:3] as
being of int2vector type; which is not right because the subscript bounds
of such a result don't, in general, satisfy the restrictions of int2vector.
To fix, implicitly promote the result of slicing int2vector to int2[],
or oidvector to oid[]. This is similar to what we've done with domains
over arrays, which is a good analogy because these types are very much
like restricted domains of the corresponding regular-array types.
A side-effect is that we now also forbid array-element updates on such
columns, eg while "update pg_index set indkey[4] = 42" would have worked
before if you were superuser (and corrupted your catalogs irretrievably,
no doubt) it's now disallowed. This seems like a good thing since, again,
some choices of subscripting would've led to results not satisfying the
restrictions of int2vector. The case of an array-slice update was
rejected before, though with a different error message than you get now.
We could make these cases work in future if we added a cast from int2[]
to int2vector (with a cast function checking the subscript restrictions)
but it seems unlikely that there's any value in that.
Per report from Ronan Dunklau. Back-patch to all supported branches
because of the crash risks involved.
Two call sites were apparently thinking that the last argument of
SPI_execute_plan() is the number of query parameters, but it is actually
the row limit. Change the calls to 0, since we don't care about the
limit there. The previous code didn't break anything, but it was still
wrong.
A pointer to a C string was treated as a pointer to a "name" datum and
passed to SPI_execute_plan(). This pointer would then end up being
passed through datumCopy(), which would try to copy the entire 64 bytes
of name data, thus running past the end of the C string. Fix by
converting the string to a proper name structure.
Found by LLVM AddressSanitizer.
pullup_replace_vars()'s decisions about whether a pulled-up replacement
expression needs to be wrapped in a PlaceHolderVar depend on the assumption
that what looks like a Var behaves like a Var. However, if the Var is a
join alias reference, later flattening of join aliases might replace the
Var with something that's not a Var at all, and should have been wrapped.
To fix, do a forcible pass of flatten_join_alias_vars() on the subquery
targetlist before we start to copy items out of it. We'll re-run that
processing on the pulled-up expressions later, but that's harmless.
Per report from Ken Tanzer; the added regression test case is based on his
example. This bug has been there since the PlaceHolderVar mechanism was
invented, but has escaped detection because the circumstances that trigger
it are fairly narrow. You need a flattenable query underneath an outer
join, which contains another flattenable query inside a join of its own,
with a dangerous expression (a constant or something else non-strict)
in that one's targetlist.
Having seen this, I'm wondering if it wouldn't be prudent to do all
alias-variable flattening earlier, perhaps even in the rewriter.
But that would probably not be a back-patchable change.
Tom Lane
Robert Haas
Noah Misch
Peter Eisentraut
Alvaro Herrera
Heikki Linnakangas
Jeff Davis
Bruce Momjian