partition_rbound_cmp() is intended to compare range partition bounds
in a way such that if all the bound values are equal but one is an
upper bound and one is a lower bound, the upper bound is treated as
smaller than the lower bound. This particular ordering is required by
RelationBuildPartitionDesc() when building the PartitionBoundInfoData,
so that it can consistently keep only the upper bounds when upper and
lower bounds coincide.
Update the function comment to make that clearer.
Also, fix a (currently unreachable) corner-case bug -- if the bound
values coincide and they contain unbounded values, fall through to the
lower-vs-upper comparison code, rather than immediately returning
0. Currently it is not possible to define coincident upper and lower
bounds containing unbounded columns, but that may change in the
future, so code defensively.
Discussion: https://postgr.es/m/CAAJ_b947mowpLdxL3jo3YLKngRjrq9+Ej4ymduQTfYR+8=YAYQ@mail.gmail.com
The previous logic, whilst not actually wrong, was overly complex and
involved doing two binary searches, where only one was really
necessary. This simplifies that logic and improves the comments.
One visible change is that if the new partition overlaps multiple
existing partitions, the error message now always reports the overlap
with the first existing partition (the one with the lowest
bounds). The old code would sometimes report the clash with the first
partition and sometimes with the last one.
Original patch idea from Amit Langote, substantially rewritten by me.
Discussion: https://postgr.es/m/CAAJ_b947mowpLdxL3jo3YLKngRjrq9+Ej4ymduQTfYR+8=YAYQ@mail.gmail.com
Buildfarm members hornet and sungazer have shown multiple instances of
"Failed test 'xmin of non-cascaded slot with hs feedback has changed'".
The reason seems to be that the test is checking the current xmin of the
master server's replication slot against a past xmin of the first slave
server's replication slot. Even though the latter slot is downstream of
the former, it's possible for its reported xmin to be ahead of the former's
reported xmin, because those numbers are updated whenever the respective
downstream walreceiver feels like it (see logic in WalReceiverMain).
Instrumenting this test shows that indeed the slave slot's xmin does often
advance before the master's does, especially if an autovacuum transaction
manages to occur during the relevant window. If we happen to capture such
an advanced xmin as $xmin, then the subsequent wait_slot_xmins call can
fall through before the master's xmin has advanced at all, and then if it
advances before the get_slot_xmins call, we can get the observed failure.
Yeah, that's a bit of a long chain of deduction, but it's hard to explain
any other way how the test can get past an "xmin <> '$xmin'" check only
to have the next query find that xmin does equal $xmin.
Fix by keeping separate images of the master and slave slots' xmins
and testing their has-xmin-advanced conditions independently.
If an operation being waited for does not complete within the timeout,
then exit with a nonzero exit status. This was previously handled
inconsistently.
WRITE_CHAR_FIELD() didn't do any escaping, so that for example a zero
byte would cause the whole output string to be truncated. To fix, pass
the char through outToken(), so it is escaped like a string. Adjust the
reading side to handle this.
Update the documentation for \pset to mention
columns|linestyle|pager_min_lines. Add various mentions of \pset
command equivalences that were previously inconsistent.
Author: Дилян Палаузов <dpa-postgres@aegee.org>
This avoids "tuple concurrently updated" errors when a ALTER or DROP
SUBSCRIPTION writes to pg_subscription_rel at the same time as a worker.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Previously, gen_random_uuid() would fall back to a weak random number
generator, unlike gen_random_bytes() which would just fail. And this was
not made very clear in the docs. For consistency, also make
gen_random_uuid() fail outright, if compiled with --disable-strong-random.
Re-word the error message you get with --disable-strong-random. It is also
used by pgp functions that require random salts, and now also
gen_random_uuid().
Reported by Radek Slupik.
Discussion: https://www.postgresql.org/message-id/20170101232054.10135.50528@wrigleys.postgresql.org
Since reducing pg_ctl's reaction time in commit c61559ec3, some
slower buildfarm members have shown erratic failures in this test.
The reason turns out to be that the test assumes synchronous
replication (because it does not provide any lag time for a commit
to replicate before shutting down the servers), but it had only
enabled sync rep in one direction. The observed symptoms correspond
to failure to replicate the last committed transaction in the other
direction, which can be expected to happen if the shutdown command
is issued soon enough and we are providing no synchronous-commit
guarantees.
Fix that, and add a bit more paranoid state checking at the bottom
of the script.
Michael Paquier and myself
Discussion: https://postgr.es/m/908.1498965681@sss.pgh.pa.us
By default, Perl's split() function drops trailing empty fields,
which is not what we want here. Oversight in commit fb093e4cb.
We'd managed to miss it thus far thanks to the very limited usage
of this function.
Discussion: https://postgr.es/m/14837.1499029831@sss.pgh.pa.us
The original coding here was very confusing, because it named the
two servers it set up "master" and "slave" even though it swapped
their replication roles multiple times. At any given point in the
script it was very unobvious whether "$node_master" actually referred
to the server named "master" or the other one. Instead, pick arbitrary
names for the two servers --- I used "london" and "paris" --- and
distinguish those permanent names from the nonce references $cur_master
and $cur_slave. Add logging to help distinguish which is which at
any given point. Also, use distinct data and transaction names to
make all the prepared transactions easily distinguishable in the
postmaster logs. (There was one place where we intentionally tested
that the server could cope with re-use of a transaction name, but
it seems like one place is sufficient for that purpose.)
Also, add checks at the end to make sure that all the transactions
that were supposed to be committed did survive.
Discussion: https://postgr.es/m/28238.1499010855@sss.pgh.pa.us
Add an optional "expected" argument to override the default assumption
that we're waiting for the query to return "t". This allows replacing
a handwritten polling loop in recovery/t/007_sync_rep.pl with use of
poll_query_until(); AFAICS that's the only remaining ad-hoc polling
loop in our TAP tests.
Change poll_query_until() to probe ten times per second not once per
second. Like some similar changes I've been making recently, the
one-second interval seems to be rooted in ancient traditions rather
than the actual likely wait duration on modern machines. I'd consider
reducing it further if there were a convenient way to spawn just one
psql for the whole loop rather than one per probe attempt.
Discussion: https://postgr.es/m/12486.1498938782@sss.pgh.pa.us
Update the documentation a bit to include that logical replication as
well as other and third-party replication clients can participate in
synchronous replication.
The simple calculations done to estimate the size of the output buffers
for ucnv_fromUChars() and ucnv_toUChars() could overflow int32_t for
large strings. To avoid that, go the long way and run the function
first without an output buffer to get the correct output buffer size
requirement.
Several callers of PostgresNode::poll_query_until() neglected to check
for failure; I do not think that's optional. Also, rewrite one place
that had reinvented poll_query_until() for no very good reason.
The regression tests contain numerous cases where we do some activity on a
master server and then wait till the slave has ack'd flushing its copy of
that transaction. Because WAL flush on the slave is asynchronous to the
logicalrep worker process, the worker cannot send such a feedback message
during the LogicalRepApplyLoop iteration where it processes the last data
from the master. In the previous coding, the feedback message would come
out only when the loop's WaitLatchOrSocket call returned WL_TIMEOUT. That
requires one full second of delay (NAPTIME_PER_CYCLE); and to add insult
to injury, it could take more than that if the WaitLatchOrSocket was
interrupted a few times by latch-setting events.
In reality we can expect the slave's walwriter process to have flushed the
WAL data after, more or less, WalWriterDelay (typically 200ms). Hence,
if there are unacked transactions pending, make the wait delay only that
long rather than the full NAPTIME_PER_CYCLE. Also, move one of the
send_feedback() calls into the loop main line, so that we'll check for the
need to send feedback even if we were woken by a latch event and not either
socket data or timeout.
It's not clear how much this matters for production purposes, but
it's definitely helpful for testing.
Discussion: https://postgr.es/m/30864.1498861103@sss.pgh.pa.us
When waiting for a logical replication worker process to start or stop,
we have to busy-wait until we see it add or remove itself from the
LogicalRepWorker slot in shared memory. Those loops were using a
one-second delay between checks, but on any reasonably modern machine, it
doesn't take more than a couple of msec for a worker to spawn or shut down.
Reduce the loop delays to 10ms to avoid wasting quite so much time in the
related regression tests.
In principle, a better solution would be to fix things so that the waiting
process can be awakened via its latch at the right time. But that seems
considerably more invasive, which is undesirable for a post-beta fix.
Worker start/stop performance likely isn't of huge interest anyway for
production purposes, so we might not ever get around to it.
In passing, rearrange the second wait loop in logicalrep_worker_stop()
so that the lock is held at the top of the loop, thus saving one lock
acquisition/release per call, and making it look more like the other loop.
Discussion: https://postgr.es/m/30864.1498861103@sss.pgh.pa.us
The bug would previously prevent the update of any column in a table
with identity columns, rather than just the actual identity column.
Reported-by: zam6ak@gmail.com
Bug: #14718
In WAL receiver and WAL server, some accesses to their corresponding
shared memory control structs were done without holding any kind of
lock, which could lead to inconsistent and possibly insecure results.
In walsender, fix by clarifying the locking rules and following them
correctly, as documented in the new comment in walsender_private.h;
namely that some members can be read in walsender itself without a lock,
because the only writes occur in the same process. The rest of the
struct requires spinlock for accesses, as usual.
In walreceiver, fix by always holding spinlock while accessing the
struct.
While there is potentially a problem in all branches, it is minor in
stable ones. This only became a real problem in pg10 because of quorum
commit in synchronous replication (commit 3901fd70cc), and a potential
security problem in walreceiver because a superuser() check was removed
by default monitoring roles (commit 25fff40798). Thus, no backpatch.
In passing, clean up some leftover braces which were used to create
unconditional blocks. Once upon a time these were used for
volatile-izing accesses to those shmem structs, which is no longer
required. Many other occurrences of this pattern remain.
Author: Michaël Paquier
Reported-by: Michaël Paquier
Reviewed-by: Masahiko Sawada, Kyotaro Horiguchi, Thomas Munro,
Robert Haas
Discussion: https://postgr.es/m/CAB7nPqTWYqtzD=LN_oDaf9r-hAjUEPAy0B9yRkhcsLdRN8fzrw@mail.gmail.com
('foo') is not a Python tuple: it is a string wrapped in parentheses. A
valid 1-element Python tuple is ('foo',).
Author: Daniele Varrazzo <daniele.varrazzo@gmail.com>
When a sync worker is waiting for the associated apply worker to notice
that it's in SYNCWAIT state, wait_for_worker_state_change() would just
patiently wait for that to happen. This generally required waiting for
the 1-second timeout in LogicalRepApplyLoop to elapse. Kicking the worker
via its latch makes things significantly snappier.
While at it, fix race conditions that could potentially result in crashes:
we can *not* call logicalrep_worker_wakeup_ptr() once we've released the
LogicalRepWorkerLock, because worker->proc might've been reset to NULL
after we do that (indeed, there's no really solid reason to believe that
the LogicalRepWorker slot even belongs to the same worker anymore).
In logicalrep_worker_wakeup(), we can just move the wakeup inside the
lock scope. In process_syncing_tables_for_apply(), a bit more code
rearrangement is needed.
Also improve some nearby comments.
It's possible for WalSndWaitForWal to be asked to wait for WAL that doesn't
exist yet. That's fine, in fact it's the normal situation if we're caught
up; but when the client requests shutdown we should not keep waiting.
The previous coding could wait indefinitely if the source server was idle.
In passing, improve the rather weak comments in this area, and slightly
rearrange some related code for better readability.
Back-patch to 9.4 where this code was introduced.
Discussion: https://postgr.es/m/14154.1498781234@sss.pgh.pa.us
ICU does not support "collate" and "ctype" being different, so the
collctype catalog column is ignored. But for catalog neatness, ensure
that they are the same.
This command used to compute the collencoding entry like when a
completely new collation is created. But for example when copying the
"C" collation, this would then result in a collation that has a
collencoding entry for the current database encoding rather than -1,
thus not making an exact copy. This has probably no practical impact,
but making this change keeps the catalog contents neat.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
The point of this loop is to insert 1000 rows into the test table
and consume 1000 XIDs. I can't see any good reason why it's useful
to launch 1000 psqls and 1000 backend processes to accomplish that.
Pushing the looping into a plpgsql DO block shaves about 10 seconds
off the runtime of the src/test/recovery TAP tests on my machine;
that's over 10% of the runtime of that test suite.
It is, in fact, sufficiently more efficient that we now demonstrably
need wait_slot_xmins() afterwards, or the slaves' xmins may not have
moved yet.
Traditionally, "pg_ctl start -w" has waited for the server to become
ready to accept connections by attempting a connection once per second.
That has the major problem that connection issues (for instance, a
kernel packet filter blocking traffic) can't be reliably told apart
from server startup issues, and the minor problem that if server startup
isn't quick, we accumulate "the database system is starting up" spam
in the server log. We've hacked around many of the possible connection
issues, but it resulted in ugly and complicated code in pg_ctl.c.
In commit c61559ec3, I changed the probe rate to every tenth of a second.
That prompted Jeff Janes to complain that the log-spam problem had become
much worse. In the ensuing discussion, Andres Freund pointed out that
we could dispense with connection attempts altogether if the postmaster
were changed to report its status in postmaster.pid, which "pg_ctl start"
already relies on being able to read. This patch implements that, teaching
postmaster.c to report a status string into the pidfile at the same
state-change points already identified as being of interest for systemd
status reporting (cf commit 7d17e683f). pg_ctl no longer needs to link
with libpq at all; all its functions now depend on reading server files.
In support of this, teach AddToDataDirLockFile() to allow addition of
postmaster.pid lines in not-necessarily-sequential order. This is needed
on Windows where the SHMEM_KEY line will never be written at all. We still
have the restriction that we don't want to truncate the pidfile; document
the reasons for that a bit better.
Also, fix the pg_ctl TAP tests so they'll notice if "start -w" mode
is broken --- before, they'd just wait out the sixty seconds until
the loop gives up, and then report success anyway. (Yes, I found that
out the hard way.)
While at it, arrange for pg_ctl to not need to #include miscadmin.h;
as a rather low-level backend header, requiring that to be compilable
client-side is pretty dubious. This requires moving the #define's
associated with the pidfile into a new header file, and moving
PG_BACKEND_VERSIONSTR someplace else. For lack of a clearly better
"someplace else", I put it into port.h, beside the declaration of
find_other_exec(), since most users of that macro are passing the value to
find_other_exec(). (initdb still depends on miscadmin.h, but at least
pg_ctl and pg_upgrade no longer do.)
In passing, fix main.c so that PG_BACKEND_VERSIONSTR actually defines the
output of "postgres -V", which remarkably it had never done before.
Discussion: https://postgr.es/m/CAMkU=1xJW8e+CTotojOMBd-yzUvD0e_JZu2xHo=MnuZ4__m7Pg@mail.gmail.com
We now disallow having triggers with both transition tables and ON
INSERT OR UPDATE (which was a PG extension to the spec anyway),
because in this case it's not at all clear how the transition tables
should work for an INSERT ... ON CONFLICT query. Separate ON INSERT
and ON UPDATE triggers with transition tables are allowed, and the
transition tables for these reflect only the inserted and only the
updated tuples respectively.
Patch by Thomas Munro
Discussion: https://postgr.es/m/CAEepm%3D11KHQ0JmETJQihSvhZB5mUZL2xrqHeXbCeLhDiqQ39%3Dw%40mail.gmail.com
Buildfarm evidence shows that TCP_KEEPALIVE_THRESHOLD doesn't exist
after all on Solaris < 11. This means we need to take positive action to
prevent the TCP_KEEPALIVE code path from being taken on that platform.
I've chosen to limit it with "&& defined(__darwin__)", since it's unclear
that anyone else would follow Apple's precedent of spelling the symbol
that way.
Also, follow a suggestion from Michael Paquier of eliminating code
duplication by defining a couple of intermediate symbols for the
socket option.
In passing, make some effort to reduce the number of translatable messages
by replacing "setsockopt(foo) failed" with "setsockopt(%s) failed", etc,
throughout the affected files. And update relevant documentation so
that it doesn't claim to provide an exhaustive list of the possible
socket option names.
Like the previous commit (f0256c774), back-patch to all supported branches.
Discussion: https://postgr.es/m/20170627163757.25161.528@wrigleys.postgresql.org
Commit 330b84d8c4 didn't contemplate the case where the public schema
has been dropped and introduced a query which fails when there is no
public schema into pg_dump (when used with -c).
Adjust the query used by pg_dump to handle the case where the public
schema doesn't exist and add tests to check that such a case no longer
fails.
Back-patch the specific fix to 9.6, as the prior commit was.
Adding tests for this case involved adding support to the pg_dump
TAP tests to work with multiple databases, which, while not a large
change, is a bit much to back-patch, so that's only done in master.
Addresses bug #14650
Discussion: https://www.postgresql.org/message-id/20170512181801.1795.47483%40wrigleys.postgresql.org
Turns out that the socket option for this is named TCP_KEEPALIVE_THRESHOLD,
at least according to the tcp(7P) man page for Solaris 11. (But since that
text refers to "SunOS", it's likely pretty ancient.) It appears that the
symbol TCP_KEEPALIVE does get defined on that platform, but it doesn't
seem to represent a valid protocol-level socket option. This leads to
bleats in the postmaster log, and no tcp_keepalives_idle functionality.
Per bug #14720 from Andrey Lizenko, as well as an earlier report from
Dhiraj Chawla that nobody had followed up on. The issue's been there
since we added the TCP_KEEPALIVE code path in commit 5acd417c8, so
back-patch to all supported branches.
Discussion: https://postgr.es/m/20170627163757.25161.528@wrigleys.postgresql.org
check_agg_arguments_walker threw an error upon seeing a SRF or window
function, but that is too aggressive: if the function is within a
sub-select then it's perfectly fine. I broke the SRF case in commit
0436f6bde by copying the logic for window functions ... but that was
broken too, and had been since commit eaccfded9.
Repair both cases in HEAD, and the window function case back to 9.3.
9.2 gets this right.
By default, wal_retrieve_retry_interval is five seconds, which is far
more than is needed in any of our TAP tests, leaving the test cases
just twiddling their thumbs for significant stretches. Moreover,
because it's so large, we get basically no testing of the retry-before-
master-is-ready code path. Hence, make PostgresNode::init set up
wal_retrieve_retry_interval = '500ms' as part of its customization of
test clusters' postgresql.conf. This shaves quite a few seconds off
the runtime of the recovery TAP tests.
Back-patch into 9.6. We have wal_retrieve_retry_interval in 9.5,
but the test infrastructure isn't there.
Discussion: https://postgr.es/m/31624.1498500416@sss.pgh.pa.us