While this will give wrong answers when estimating selectivity for a
comparison operator that's using a non-default collation, the estimation
error probably won't be large; and anyway the former approach created
estimation errors of its own by trying to use a histogram that might have
been computed with some other collation. So we'll adopt this simplified
approach for now and perhaps improve it sometime in the future.
This patch incorporates changes from Andres Freund to make sure that
selfuncs.c passes a valid collation OID to any datatype-specific function
it calls, in case that function wants collation information. Said OID will
now always be DEFAULT_COLLATION_OID, but at least we won't get errors.
Add dummy returns before every potential division-by-zero in int8.c,
because apparently further "improvements" in gcc's optimizer have
enabled it to break functions that weren't broken before.
Aurelien Jarno, via Martin Pitt
CollateClause is now used only in raw grammar output, and CollateExpr after
parse analysis. This is for clarity and to avoid carrying collation names
in post-analysis parse trees: that's both wasteful and possibly misleading,
since the collation's name could be changed while the parsetree still
exists.
Also, clean up assorted infelicities and omissions in processing of the
node type.
Including collation in the behavior of that function promotes a world view
we do not want. Moreover, it was producing the wrong behavior for pg_dump
anyway: what we want is to dump a COLLATE clause on attributes whose
attcollation is different from the underlying type, and likewise for
domains, and the function cannot do that for us. Doing it the hard way
in pg_dump is a bit more tedious but produces more correct output.
In passing, fix initdb so that the initial entry in pg_collation is
properly pinned. It was droppable before :-(
The initial collations patch treated a COLLATE spec as part of a TypeName,
following what can only be described as brain fade on the part of the SQL
committee. It's a lot more reasonable to treat COLLATE as a syntactically
separate object, so that it can be added in only the productions where it
actually belongs, rather than needing to reject it in a boatload of places
where it doesn't belong (something the original patch mostly failed to do).
In addition this change lets us meet the spec's requirement to allow
COLLATE anywhere in the clauses of a ColumnDef, and it avoids unfriendly
behavior for constructs such as "foo::type COLLATE collation".
To do this, pull collation information out of TypeName and put it in
ColumnDef instead, thus reverting most of the collation-related changes in
parse_type.c's API. I made one additional structural change, which was to
use a ColumnDef as an intermediate node in AT_AlterColumnType AlterTableCmd
nodes. This provides enough room to get rid of the "transform" wart in
AlterTableCmd too, since the ColumnDef can carry the USING expression
easily enough.
Also fix some other minor bugs that have crept in in the same areas,
like failure to copy recently-added fields of ColumnDef in copyfuncs.c.
While at it, document the formerly secret ability to specify a collation
in ALTER TABLE ALTER COLUMN TYPE, ALTER TYPE ADD ATTRIBUTE, and
ALTER TYPE ALTER ATTRIBUTE TYPE; and correct some misstatements about
what the default collation selection will be when COLLATE is omitted.
BTW, the three-parameter form of format_type() should go away too,
since it just contributes to the confusion in this area; but I'll do
that in a separate patch.
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order. Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values. And attempts to do conflicting updates will
have unpredictable results. We'll need to document all that.
This commit just fixes the code; documentation updates are waiting on
author.
Marko Tiikkaja and Hitoshi Harada
The recent additions for FDW support required checking foreign-table-ness
in several places in the parse/plan chain. While it's not clear whether
that would really result in a noticeable slowdown, it seems best to avoid
any performance risk by keeping a copy of the relation's relkind in
RangeTblEntry. That might have some other uses later, anyway.
Per discussion.
Add functions plpy.quote_ident, plpy.quote_literal,
plpy.quote_nullable, which wrap the equivalent SQL functions.
To be able to propagate char * constness properly, make the argument
of quote_literal_cstr() const char *. This also makes it more
consistent with quote_identifier().
Jan Urbański, reviewed by Hitoshi Harada, some refinements by Peter
Eisentraut
void_send is useful for the same reason that void_out doesn't throw error,
namely that someone might do "select void_returning_func(...)" from a
client that prefers to operate in binary mode. The void_recv function may
or may not have any practical use, but we provide it for symmetry.
Radosław Smogura
Add a fdwhandler column to pg_foreign_data_wrapper, plus HANDLER options
in the CREATE FOREIGN DATA WRAPPER and ALTER FOREIGN DATA WRAPPER commands,
plus pg_dump support for same. Also invent a new pseudotype fdw_handler
with properties similar to language_handler.
This is split out of the "FDW API" patch for ease of review; it's all stuff
we will certainly need, regardless of any other details of the FDW API.
FDW handler functions will not actually get called yet.
In passing, fix some omissions and infelicities in foreigncmds.c.
Shigeru Hanada, Jan Urbanski, Heikki Linnakangas
They share the same locking namespace with the existing session-level
advisory locks, but they are automatically released at the end of the
current transaction and cannot be released explicitly via unlock
functions.
Marko Tiikkaja, reviewed by me.
That function was supposing that indexoid == 0 for a hypothetical index,
but that is not likely to be true in any non-toy implementation of an index
adviser, since assigning a fake OID is the only way to know at EXPLAIN time
which hypothetical index got selected. Fix by adding a flag to
IndexOptInfo to mark hypothetical indexes. Back-patch to 9.0 where
get_actual_variable_range() was added.
Gurjeet Singh
These are needed to support reloading dumps of 9.0 installations containing
contrib/intarray or contrib/tsearch2. Since not only regular dump/reload
but binary upgrade would fail, it seems worth the trouble to carry these
stubs for awhile. Note that the contrib opclasses referencing these
functions will still work fine, since GIN doesn't actually pay any
attention to the declared signature of a support function.
(I'm not entirely sure that we've finished bikeshedding the syntax details,
but the functionality seems OK.)
Pavel Stehule, reviewed by Stephen Frost and Tom Lane
relative, by creating a function path_is_relative_and_below_cwd() to
check for specific requirements. It is unclear if this fixes a security
problem or not but the new code is more robust.
Tracks one counter for each database, which is reset whenever
the statistics for any individual object inside the database is
reset, and one counter for the background writer.
Tomas Vondra, reviewed by Greg Smith
This patch adds the server infrastructure to support extensions.
There is still one significant loose end, namely how to make it play nice
with pg_upgrade, so I am not yet committing the changes that would make
all the contrib modules depend on this feature.
In passing, fix a disturbingly large amount of breakage in
AlterObjectNamespace() and callers.
Dimitri Fontaine, reviewed by Anssi Kääriäinen,
Itagaki Takahiro, Tom Lane, and numerous others
This adds collation support for columns and domains, a COLLATE clause
to override it per expression, and B-tree index support.
Peter Eisentraut
reviewed by Pavel Stehule, Itagaki Takahiro, Robert Haas, Noah Misch
FK constraints that are marked NOT VALID may later be VALIDATED, which uses an
ShareUpdateExclusiveLock on constraint table and RowShareLock on referenced
table. Significantly reduces lock strength and duration when adding FKs.
New state visible from psql.
Simon Riggs, with reviews from Marko Tiikkaja and Robert Haas
Until now, our Serializable mode has in fact been what's called Snapshot
Isolation, which allows some anomalies that could not occur in any
serialized ordering of the transactions. This patch fixes that using a
method called Serializable Snapshot Isolation, based on research papers by
Michael J. Cahill (see README-SSI for full references). In Serializable
Snapshot Isolation, transactions run like they do in Snapshot Isolation,
but a predicate lock manager observes the reads and writes performed and
aborts transactions if it detects that an anomaly might occur. This method
produces some false positives, ie. it sometimes aborts transactions even
though there is no anomaly.
To track reads we implement predicate locking, see storage/lmgr/predicate.c.
Whenever a tuple is read, a predicate lock is acquired on the tuple. Shared
memory is finite, so when a transaction takes many tuple-level locks on a
page, the locks are promoted to a single page-level lock, and further to a
single relation level lock if necessary. To lock key values with no matching
tuple, a sequential scan always takes a relation-level lock, and an index
scan acquires a page-level lock that covers the search key, whether or not
there are any matching keys at the moment.
A predicate lock doesn't conflict with any regular locks or with another
predicate locks in the normal sense. They're only used by the predicate lock
manager to detect the danger of anomalies. Only serializable transactions
participate in predicate locking, so there should be no extra overhead for
for other transactions.
Predicate locks can't be released at commit, but must be remembered until
all the transactions that overlapped with it have completed. That means that
we need to remember an unbounded amount of predicate locks, so we apply a
lossy but conservative method of tracking locks for committed transactions.
If we run short of shared memory, we overflow to a new "pg_serial" SLRU
pool.
We don't currently allow Serializable transactions in Hot Standby mode.
That would be hard, because even read-only transactions can cause anomalies
that wouldn't otherwise occur.
Serializable isolation mode now means the new fully serializable level.
Repeatable Read gives you the old Snapshot Isolation level that we have
always had.
Kevin Grittner and Dan Ports, reviewed by Jeff Davis, Heikki Linnakangas and
Anssi Kääriäinen
We can get the length of a compressed or out-of-line datum without actually
detoasting it. If the lengths of two strings are unequal, we can then
conclude they are unequal without detoasting. That saves considerable work
in an admittedly less-common case, without costing anything much when the
optimization doesn't apply.
Noah Misch
If the slice to be assigned to was before the existing array lower bound
(requiring at least one null element to spring into existence to fill the
gap), the code miscalculated how many entries needed to be copied from
the old array's null bitmap. This could result in trashing the array's
data area (as seen in bug #5840 from Karsten Loesing), or worse.
This has been broken since we first allowed the behavior of assigning to
non-adjacent slices, in 8.2. Back-patch to all affected versions.
This applies the fix for bug #5784 to remaining places where we wish
to reject nulls in user-supplied arrays. In all these places, there's
no reason not to allow a null bitmap to be present, so long as none of
the current elements are actually null.
I did not change some other places where we are looking at system catalog
entries or aggregate transition values, as the presence of a null bitmap
in such an array would be suspicious.
This will support fixing contrib/intarray (and probably other places)
so that they don't have to fail on arrays that contain a null bitmap
but no live null entries.
The only reason this wasn't crashing while testing the core anyarray
operators was that it was disabled for those cases because of passing the
wrong type information to get_opfamily_proc :-(. So fix that too, and make
it insist on finding the support proc --- in hindsight, silently doing
nothing is not as sane a coping mechanism as all that.
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
The "date" type supports a wider range of dates than int64 timestamps do.
However, there is pre-int64-timestamp code in the planner that assumes that
all date values can be converted to timestamp with impunity. Fortunately,
what we really need out of the conversion is always a double (float8)
value; so even when the date is out of timestamp's range it's possible to
produce a sane answer. All we need is a code path that doesn't try to
force the result into int64. Per trouble report from David Rericha.
Back-patch to all supported versions. Although this is surely a corner
case, there's not much point in advertising a date range wider than
timestamp's if we will choke on such values in unexpected places.
This is to avoid use of the C++ keywords "bitand" and "bitor" in
the header file utils/varbit.h. Note the functions' SQL-level
names are not changed, only their C-level names.
In passing, make some comments in varbit.c conform to project-standard
layout.
It appears that this will be faster for all but the shortest strings;
at least one some platforms, memcmp() can use word-at-a-time comparisons.
Noah Misch, somewhat pared down.
eval_const_expressions() can replace CaseTestExprs with constants when
the surrounding CASE's test expression is a constant. This confuses
ruleutils.c's heuristic for deparsing simple-form CASEs, leading to
Assert failures or "unexpected CASE WHEN clause" errors. I had put in
a hack solution for that years ago (see commit
514ce7a331 of 2006-10-01), but bug #5794
from Peter Speck shows that that solution failed to cover all cases.
Fortunately, there's a much better way, which came to me upon reflecting
that Peter's "CASE TRUE WHEN" seemed pretty redundant: we can "simplify"
the simple-form CASE to the general form of CASE, by simply omitting the
constant test expression from the rebuilt CASE construct. This is
intuitively valid because there is no need for the executor to evaluate
the test expression at runtime; it will never be referenced, because any
CaseTestExprs that would have referenced it are now replaced by constants.
This won't save a whole lot of cycles, since evaluating a Const is pretty
cheap, but a cycle saved is a cycle earned. In any case it beats kluging
ruleutils.c still further. So this patch improves const-simplification
and reverts the previous change in ruleutils.c.
Back-patch to all supported branches. The bug exists in 8.1 too, but it's
out of warranty.
After parsing a parenthesized subexpression, we must pop all pending
ANDs and NOTs off the stack, just like the case for a simple operand.
Per bug #5793.
Also fix clones of this routine in contrib/intarray and contrib/ltree,
where input of types query_int and ltxtquery had the same problem.
Back-patch to all supported versions.
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
This is a heavily revised version of builtin_knngist_core-0.9. The
ordering operators are no longer mixed in with actual quals, which would
have confused not only humans but significant parts of the planner.
Instead, ordering operators are carried separately throughout planning and
execution.
Since the API for ambeginscan and amrescan functions had to be changed
anyway, this commit takes the opportunity to rationalize that a bit.
RelationGetIndexScan no longer forces a premature index_rescan call;
instead, callers of index_beginscan must call index_rescan too. Aside from
making the AM-side initialization logic a bit less peculiar, this has the
advantage that we do not make a useless extra am_rescan call when there are
runtime key values. AMs formerly could not assume that the key values
passed to amrescan were actually valid; now they can.
Teodor Sigaev and Tom Lane
Formerly we looked up the operators associated with each index (caching
them in relcache) and then the planner looked up the btree opfamily
containing such operators in order to build the btree-centric pathkey
representation that describes the index's sort order. This is quite
pointless for btree indexes: we might as well just use the index's opfamily
information directly. That saves syscache lookup cycles during planning,
and furthermore allows us to eliminate the relcache's caching of operators
altogether, which may help in reducing backend startup time.
I added code to plancat.c to perform the same type of double lookup
on-the-fly if it's ever faced with a non-btree amcanorder index AM.
If such a thing actually becomes interesting for production, we should
replace that logic with some more-direct method for identifying the
corresponding btree opfamily; but it's not worth spending effort on now.
There is considerably more to do pursuant to my recent proposal to get rid
of sort-operator-based representations of sort orderings, but this patch
grabs some of the low-hanging fruit. I'll look at the remainder of that
work after the current commitfest.
supplied, also print the IP address. This allows IPv4 and IPv6 failures
to be distinguished. Also useful when a hostname resolves to multiple
IP addresses.
Also, remove use of inet_ntoa() and use our own inet_net_ntop() in all
places, including in libpq, because it is thread-safe.
Currently, three conversion format specifiers are supported: %s for a
string, %L for an SQL literal, and %I for an SQL identifier. The latter
two are deliberately designed not to overlap with what sprintf() already
supports, in case we want to add more of sprintf()'s functionality here
later.
Patch by Pavel Stehule, heavily revised by me. Reviewed by Jeff Janes
and, in earlier versions, by Itagaki Takahiro and Tom Lane.
Avoid depending on LL notation, which is likely to not work in pre-C99
compilers; don't pointlessly use INT32_MIN/INT64_MIN in code that has
the numerical value hard-wired into it anyway; remove some gratuitous
style inconsistencies between pg_ltoa and pg_lltoa; fix int2 test case
so it actually tests int2.
This eliminates the need for inefficient implementions of this
functionality in both contrib/dblink and contrib/tablefunc, so remove
them. The upcoming patch implementing an in-core format() function
will also require this functionality.
In passing, add some regression tests.
Use INT_MIN rather than INT32_MIN as we do elsewhere in the code, and
try to work around nonexistence of INT64_MIN if necessary. Adjust the
new regression tests to something hopefully saner, per observation by
Tom Lane.
A hand-coded implementation turns out to be much faster than calling
printf(). In passing, add a few more regresion tests.
Andres Freund, with assorted, mostly cosmetic changes.
This new field counts the number of times that a backend which writes a
buffer out to the OS must also fsync() it. This happens when the
bgwriter fsync request queue is full, and is generally detrimental to
performance, so it's good to know when it's happening. Along the way,
log a new message at level DEBUG1 whenever we fail to hand off an fsync,
so that the problem can also be seen in examination of log files
(if the logging level is cranked up high enough).
Greg Smith, with minor tweaks by me.
This code was just plain wrong: what you got was not a line through the
given point but a line almost indistinguishable from the Y-axis, although
not truly vertical. The only caller that tries to use this function with
m == DBL_MAX is dist_ps_internal for the case where the lseg is horizontal;
it would end up producing the distance from the given point to the place
where the lseg's line crosses the Y-axis. That function is used by other
operators too, so there are several operators that could compute wrong
distances from a line segment to something else. Per bug #5745 from
jindiax.
Back-patch to all supported branches.
We failed to record any dependency on the underlying table for an index
declared like "create index i on t (foo(t.*))". This would create trouble
if the table were dropped without previously dropping the index. To fix,
simplify some overly-cute code in index_create(), accepting the possibility
that sometimes the whole-table dependency will be redundant. Also document
this hazard in dependency.c. Per report from Kevin Grittner.
In passing, prevent a core dump in pg_get_indexdef() if the index's table
can't be found. I came across this while experimenting with Kevin's
example. Not sure it's a real issue when the catalogs aren't corrupt, but
might as well be cautious.
Back-patch to all supported versions.
The core of this patch is hash_array() and associated typcache
infrastructure, which works just about exactly like the existing support
for array comparison.
In addition I did some work to ensure that the planner won't think that an
array type is hashable unless its element type is hashable, and similarly
for sorting. This includes adding a datatype parameter to op_hashjoinable
and op_mergejoinable, and adding an explicit "hashable" flag to
SortGroupClause. The lack of a cross-check on the element type was a
pre-existing bug in mergejoin support --- but it didn't matter so much
before, because if you couldn't sort the element type there wasn't any good
alternative to failing anyhow. Now that we have the alternative of hashing
the array type, there are cases where we can avoid a failure by being picky
at the planner stage, so it's time to be picky.
The issue of exactly how to combine the per-element hash values to produce
an array hash is still open for discussion, but the rest of this is pretty
solid, so I'll commit it as-is.
Per C standard, these are semantically the same thing; but saying NULL
when you mean NULL is good for readability.
Marti Raudsepp, per results of INRIA's Coccinelle.
A NestLoopParam's value can only be a Var or Aggref, but this isn't the
case in general for SubPlan parameters, so print_parameter_expr had better
be prepared to cope. Brain fade in my recent patch to print the referenced
expression instead of just printing $N for PARAM_EXEC Params. Per report
from Pavel Stehule.
After much expenditure of effort, we've got this to the point where the
performance penalty is pretty minimal in typical cases.
Andrew Dunstan, reviewed by Brendan Jurd, Dean Rasheed, and Tom Lane
This patch eliminates various bizarre behaviors caused by sloppy thinking
about the difference between a domain type and its underlying array type.
In particular, the operation of updating one element of such an array
has to be considered as yielding a value of the underlying array type,
*not* a value of the domain, because there's no assurance that the
domain's CHECK constraints are still satisfied. If we're intending to
store the result back into a domain column, we have to re-cast to the
domain type so that constraints are re-checked.
For similar reasons, such a domain can't be blindly matched to an ANYARRAY
polymorphic parameter, because the polymorphic function is likely to apply
array-ish operations that could invalidate the domain constraints. For the
moment, we just forbid such matching. We might later wish to insert an
automatic downcast to the underlying array type, but such a change should
also change matching of domains to ANYELEMENT for consistency.
To ensure that all such logic is rechecked, this patch removes the original
hack of setting a domain's pg_type.typelem field to match its base type;
the typelem will always be zero instead. In those places where it's really
okay to look through the domain type with no other logic changes, use the
newly added get_base_element_type function in place of get_element_type.
catversion bumped due to change in pg_type contents.
Per bug #5717 from Richard Huxton and subsequent discussion.
The better estimate requires more statistics than we previously stored:
in particular, counts of "entry" versus "data" pages within the index,
as well as knowledge of the number of distinct key values. We collect
this information during initial index build and update it during VACUUM,
storing the info in new fields on the index metapage. No initdb is
required because these fields will read as zeroes in a pre-existing
index, and the new gincostestimate code is coded to behave (reasonably)
sanely if they are zeroes.
Teodor Sigaev, reviewed by Jan Urbanski, Tom Lane, and Itagaki Takahiro.
This is not the hoped-for facility of using INSERT/UPDATE/DELETE inside
a WITH, but rather the other way around. It seems useful in its own
right anyway.
Note: catversion bumped because, although the contents of stored rules
might look compatible, there's actually a subtle semantic change.
A single Query containing a WITH and INSERT...VALUES now represents
writing the WITH before the INSERT, not before the VALUES. While it's
not clear that that matters to anyone, it seems like a good idea to
have it cited in the git history for catversion.h.
Original patch by Marko Tiikkaja, with updating and cleanup by
Hitoshi Harada.
This patch eliminates the former need to sort the output of an Append scan
when an ordered scan of an inheritance tree is wanted. This should be
particularly useful for fast-start cases such as queries with LIMIT.
Original patch by Greg Stark, with further hacking by Hans-Jurgen Schonig,
Robert Haas, and Tom Lane.
to see if a particular privilege has been granted to PUBLIC.
The issue was reported by Jim Nasby.
Patch by Alvaro Herrera, and reviewed by KaiGai Kohei.
This patch adds the SQL-standard concept of an INSTEAD OF trigger, which
is fired instead of performing a physical insert/update/delete. The
trigger function is passed the entire old and/or new rows of the view,
and must figure out what to do to the underlying tables to implement
the update. So this feature can be used to implement updatable views
using trigger programming style rather than rule hacking.
In passing, this patch corrects the names of some columns in the
information_schema.triggers view. It seems the SQL committee renamed
them somewhere between SQL:99 and SQL:2003.
Dean Rasheed, reviewed by Bernd Helmle; some additional hacking by me.
Various places were testing TRIGGER_FIRED_BEFORE() where what they really
meant was !TRIGGER_FIRED_AFTER(), or vice versa. This needs to be cleaned
up because there are about to be more than two possible states.
We might want to note this in the 9.1 release notes as something for
trigger authors to double-check.
For consistency's sake I also changed some places that assumed that
TRIGGER_FIRED_FOR_ROW and TRIGGER_FIRED_FOR_STATEMENT are necessarily
mutually exclusive; that's not in immediate danger of breaking, but
it's still sloppier than it should be.
Extracted from Dean Rasheed's patch for triggers on views. I'm committing
this separately since it's an identifiable separate issue, and is the
only reason for the patch to touch most of these particular files.
This was unintentionally broken in 8.4 while tightening up checking of
ordinary non-Julian date inputs to forbid references to "year zero".
Per bug #5672 from Benjamin Gigot.
transaction snapshots, i.e. a snapshot registered at the beginning of
a transaction. Change variable naming and comments to reflect this reality
in preparation for a future, truly serializable mode, e.g.
Serializable Snapshot Isolation (SSI).
For the moment transaction snapshots are still used to implement
SERIALIZABLE, but hopefully not for too much longer. Patch by Kevin
Grittner and Dan Ports with review and some minor wording changes by me.
Since the code underlying pg_get_expr() is not secure against malformed
input, and can't practically be made so, we need to prevent miscreants
from feeding arbitrary data to it. We can do this securely by declaring
pg_get_expr() to take a new datatype "pg_node_tree" and declaring the
system catalog columns that hold nodeToString output to be of that type.
There is no way at SQL level to create a non-null value of type pg_node_tree.
Since the backend-internal operations that fill those catalog columns
operate below the SQL level, they are oblivious to the datatype relabeling
and don't need any changes.
array_in discards unquoted leading and trailing whitespace in array values,
while array_out is careful to quote array elements that contain whitespace.
This is problematic when the definition of "whitespace" varies between
locales: array_in could drop characters that were meant to be part of the
value. To avoid that, lock down "whitespace" to mean only the traditional
six ASCII space characters.
This change also works around a bug in OS X and some older BSD systems, in
which isspace() could return true for character fragments in UTF8 locales.
(There may be other places in PG where that bug could cause problems, but
this is the only one complained of so far; see recent report from Steven
Schlansker.)
Back-patch to 9.0, but not further. Given the lack of previous reports
of trouble, changing this behavior in stable branches seems to offer
more risk of breaking applications than reward of avoiding problems.
This allows us to reliably remove all leftover temporary relation
files on cluster startup without reference to system catalogs or WAL;
therefore, we no longer include temporary relations in XLOG_XACT_COMMIT
and XLOG_XACT_ABORT WAL records.
Since these changes require including a backend ID in each
SharedInvalSmgrMsg, the size of the SharedInvalidationMessage.id
field has been reduced from two bytes to one, and the maximum number
of connections has been reduced from INT_MAX / 4 to 2^23-1. It would
be possible to remove these restrictions by increasing the size of
SharedInvalidationMessage by 4 bytes, but right now that doesn't seem
like a good trade-off.
Review by Jaime Casanova and Tom Lane.
functions to the core XML code. Per discussion, the former depends on
XMLOPTION while the others do not. These supersede a version previously
offered by contrib/xml2.
Mike Fowler, reviewed by Pavel Stehule
and the editor's cursor will be initially placed on that line. In \e the
lines are counted with respect to the query buffer, while in \ef they are
counted with line 1 = first line of function body. These choices are useful
for positioning the cursor on the line of a previously-reported error.
To avoid assumptions about what switch the user's editor takes for this
purpose, invent a new psql variable EDITOR_LINENUMBER_SWITCH with (at
present) no default value.
One incompatibility from previous behavior is that "\e 1234" will now
take "1234" as a line number not a file name. There are at least two
ways to select a numerically-named file if you really want to.
Pavel Stehule, reviewed by Jan Urbanski, with further editing by Robert Haas
and Tom Lane
better handling of NULL elements within the arrays. The third parameter
is a string that should be used to represent a NULL element, or should
be translated into a NULL element, respectively. If the third parameter
is NULL it behaves the same as the two-parameter form.
There are two incompatible changes in the behavior of the two-parameter form
of string_to_array. First, it will return an empty (zero-element) array
rather than NULL when the input string is of zero length. Second, if the
field separator is NULL, the function splits the string into individual
characters, rather than returning NULL as before. These two changes make
this form fully compatible with the behavior of the new three-parameter form.
Pavel Stehule, reviewed by Brendan Jurd
statistics counts. These numbers are being accumulated but haven't yet been
transmitted to the collector (and won't be, until the transaction ends).
For some purposes, though, it's handy to be able to look at them.
Joel Jacobson, reviewed by Itagaki Takahiro
functionality, while creating an ambiguity in usage with ORDER BY that at
least two people have already gotten seriously confused by. Also, add an
opr_sanity test to check that we don't in future violate the newly minted
policy of not having built-in aggregates with the same name and different
numbers of parameters. Per discussion of a complaint from Thom Brown.
- Rename TSParserGetPrsid to get_ts_parser_oid.
- Rename TSDictionaryGetDictid to get_ts_dict_oid.
- Rename TSTemplateGetTmplid to get_ts_template_oid.
- Rename TSConfigGetCfgid to get_ts_config_oid.
- Rename FindConversionByName to get_conversion_oid.
- Rename GetConstraintName to get_constraint_oid.
- Add new functions get_opclass_oid, get_opfamily_oid, get_rewrite_oid,
get_rewrite_oid_without_relid, get_trigger_oid, and get_cast_oid.
The name of each function matches the corresponding catalog.
Thanks to KaiGai Kohei for the review.
unqualified names.
- Add a missing_ok parameter to get_tablespace_oid.
- Avoid duplicating get_tablespace_od guts in objectNamesToOids.
- Add a missing_ok parameter to get_database_oid.
- Replace get_roleid and get_role_checked with get_role_oid.
- Add get_namespace_oid, get_language_oid, get_am_oid.
- Refactor existing code to use new interfaces.
Thanks to KaiGai Kohei for the review.
The old computation can sometimes underestimate the necessary space
by 2 bytes; however we're not back-patching this, because this result
isn't used for anything critical. Per discussion with Tom Lane,
make the typmod test in this function match the ones in numeric()
and apply_typmod() exactly.
implementation deficiencies. Per discussion of bug #5592, we're not
going to change it, but these things should be documented so that if
anyone ever reimplements type tinterval, they will be more careful.
makeTSQuerySign. The first of these is a live bug, on some platforms,
as per bug #5590 from John Regehr. However the consequences seem limited
because of the relatively narrow scope of use of QTNode.sign. The shift in
makeTSQuerySign is actually safe because TSQS_SIGLEN is unsigned, but it
seems like a good idea to insert an explicit cast rather than depend on that.
tsqueries. CompareTSQ has to have a guard for the case rather than blindly
applying QTNodeCompare to random data past the end of the datums. Also,
change QTNodeCompare to be a little less trusting: use an actual test rather
than just Assert'ing that the input is sane. Problem encountered while
investigating another issue (I saw a core dump in autoanalyze on a table
containing multiple empty tsquery values).
Back-patch to all branches with tsquery support.
In HEAD, also fix some bizarre (though not outright wrong) coding in
tsq_mcontains().
interval input "invalid" was specified together with other fields. Spotted
by Neil Conway with the help of a clang warning. Although this has been
wrong since the interval code was written more than 10 years ago, it doesn't
affect anything beyond which error message you get for a wrong input, so not
worth back-patching very far.
Avoid hard-coding lockmode used for many altering DDL commands, allowing easier
future changes of lock levels. Implementation of initial analysis on DDL
sub-commands, so that many lock levels are now at ShareUpdateExclusiveLock or
ShareRowExclusiveLock, allowing certain DDL not to block reads/writes.
First of number of planned changes in this area; additional docs required
when full project complete.
I've added a quote_all_identifiers GUC which affects the behavior
of the backend, and a --quote-all-identifiers argument to pg_dump
and pg_dumpall which sets the GUC and also affects the quoting done
internally by those applications.
Design by Tom Lane; review by Alex Hunsaker; in response to bug #5488
filed by Hartmut Goebel.
Remove bespoke code in DoCopy and RI_Initial_Check, which now instead
fabricate call ExecCheckRTPerms with a manufactured RangeTblEntry.
This is intended to make it feasible for an enhanced security provider
to actually make use of ExecutorCheckPerms_hook, but also has the
advantage that RI_Initial_Check can allow use of the fast-path when
column-level but not table-level permissions are present.
KaiGai Kohei. Reviewed (in an earlier version) by Stephen Frost, and by me.
Some further changes to the comments by me.
rather than just $N. This brings the display of nestloop-inner-indexscan
plans back to where it's been, and incidentally improves the display of
SubPlan parameters as well. In passing, simplify the EXPLAIN code by
having it deal primarily in the PlanState tree rather than separately
searching Plan and PlanState trees. This is noticeably cleaner for
subplans, and about a wash elsewhere.
One small difference from previous behavior is that EXPLAIN will no longer
qualify local variable references in inner-indexscan plan nodes, since it
no longer sees such nodes as possibly referencing multiple tables. Vars
referenced through PARAM_EXEC Params are still forcibly qualified, though,
so I don't think the display is any more confusing than before. Adjust a
couple of examples in the documentation to match this behavior.
resjunk outputs of subquery tlists, instead of throwing an error. Per bug
#5548 from Daniel Grace.
We might at some point find we ought to back-patch this further than 9.0,
but I think that such Vars can only occur as resjunk members of upper-level
tlists, in which case the problem can't arise because prior versions didn't
print resjunk tlist items in EXPLAIN VERBOSE.
"val AS name" to "name := val", as per recent discussion.
This patch catches everything in the original named-parameters patch,
but I'm not certain that no other dependencies snuck in later (grepping
the source tree for all uses of AS soon proved unworkable).
In passing I note that we've dropped the ball at least once on keeping
ecpg's lexer (as opposed to parser) in sync with the backend. It would
be a good idea to go through all of pgc.l and see if it's in sync now.
I didn't attempt that at the moment.
end of the pattern: the code path that handles \ just after % should throw
error too. As in the previous patch, not back-patching for fear of breaking
apps that worked before.
for sure ;-)). It now also optimizes more cases, such as %_%_. Improve
comments too. Per bug #5478.
In passing, also rename the TCHAR macro to GETCHAR, because pgindent is
messing with the formatting of the former (apparently it now thinks TCHAR
is a typedef name).
Back-patch to 8.3, where the bug was introduced.
My initial impression that glibc was measuring the precision in characters
(which is what the Linux man page says it does) was incorrect. It does take
the precision to be in bytes, but it also tries to truncate the string at a
character boundary. The bottom line remains the same: it will mess up
if the string is not in the encoding it expects, so we need to avoid %.*s
anytime there's a significant risk of that. Previous code changes are still
good, but adjust the comments to reflect this knowledge. Per research by
Hernan Gonzalez.
Depending on which spec you read, field widths and precisions in %s may be
counted either in bytes or characters. Our code was assuming bytes, which
is wrong at least for glibc's implementation, and in any case libc might
have a different idea of the prevailing encoding than we do. Hence, for
portable results we must avoid using anything more complex than just "%s"
unless the string to be printed is known to be all-ASCII.
This patch fixes the cases I could find, including the psql formatting
failure reported by Hernan Gonzalez. In HEAD only, I also added comments
to some places where it appears safe to continue using "%.*s".
from lc_ctype, that could happen on Windows. We need to change lc_ctype
together with lc_monetary or lc_numeric, and convert strings in lconv
from lc_ctype encoding to the database encoding.
The bug reported by Mikko, original patch by Hiroshi Inoue,
with changes by Bruce and me.
rather than only sort-of working as the previous attempt had left it.
Clean up some unnecessary differences between the way these were coded and
the way the YYYY case was coded. Update the regression test cases that
proved that it wasn't working.
too, instead of duplicating the functionality (badly).
I renamed xml_init to pg_xml_init, because the former seemed just a bit too
generic to be safe as a global symbol. I considered likewise renaming
xml_ereport to pg_xml_ereport, but felt that the reference to ereport probably
made it sufficiently PG-centric already.
the fact that NetBSD/mips is currently broken, as per buildfarm member pika.
Also add regression tests to ensure that get_float8_nan and get_float4_nan
are exercised even on platforms where they are not needed by
float8in/float4in.
Zoltán Böszörményi and Tom Lane
Add some checks that seem logically necessary, in particular let's make
real sure that HS slave sessions cannot create temp tables. (If they did
they would think that temp tables belonging to the master's session with
the same BackendId were theirs. We *must* not allow myTempNamespace to
become set in a slave session.)
Change setval() and nextval() so that they are only allowed on temp sequences
in a read-only transaction. This seems consistent with what we allow for
table modifications in read-only transactions. Since an HS slave can't have a
temp sequence, this also provides a nicer cure for the setval PANIC reported
by Erik Rijkers.
Make the error messages more uniform, and have them mention the specific
command being complained of. This seems worth the trifling amount of extra
code, since people are likely to see such messages a lot more than before.
ArrayRef expressions that are not in the immediate context of an INSERT or
UPDATE targetlist. Such cases never arise in stored rules, so ruleutils.c
hadn't tried to handle them. However, they do occur in the targetlists of
plans derived from such statements, and now that EXPLAIN VERBOSE tries to
print targetlists, we need some way to deal with the case.
I chose to represent an assignment ArrayRef as "array[subscripts] := source",
which is fairly reasonable and doesn't omit any information. However,
FieldStore is problematic because the planner will fold multiple assignments
to fields of the same composite column into one FieldStore, resulting in a
structure that is hard to understand at all, let alone display comprehensibly.
So in that case I punted and just made it print the source expression(s).
Backpatch to 8.4 --- the lack of functionality exists in older releases,
but doesn't seem to be important for lack of anything that would call it.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
The purpose of this change is to eliminate the need for every caller
of SearchSysCache, SearchSysCacheCopy, SearchSysCacheExists,
GetSysCacheOid, and SearchSysCacheList to know the maximum number
of allowable keys for a syscache entry (currently 4). This will
make it far easier to increase the maximum number of keys in a
future release should we choose to do so, and it makes the code
shorter, too.
Design and review by Tom Lane.
This patch allows the frame to start from CURRENT ROW (in either RANGE or
ROWS mode), and it also adds support for ROWS n PRECEDING and ROWS n FOLLOWING
start and end points. (RANGE value PRECEDING/FOLLOWING isn't there yet ---
the grammar works, but that's all.)
Hitoshi Harada, reviewed by Pavel Stehule
being called as aggregates, and to get the aggregate transition state memory
context if needed. Use it instead of poking directly into AggState and
WindowAggState in places that shouldn't know so much.
We should have done this in 8.4, probably, but better late than never.
Revised version of a patch by Hitoshi Harada.
of shared or nailed system catalogs. This has two key benefits:
* The new CLUSTER-based VACUUM FULL can be applied safely to all catalogs.
* We no longer have to use an unsafe reindex-in-place approach for reindexing
shared catalogs.
CLUSTER on nailed catalogs now works too, although I left it disabled on
shared catalogs because the resulting pg_index.indisclustered update would
only be visible in one database.
Since reindexing shared system catalogs is now fully transactional and
crash-safe, the former special cases in REINDEX behavior have been removed;
shared catalogs are treated the same as non-shared.
This commit does not do anything about the recently-discussed problem of
deadlocks between VACUUM FULL/CLUSTER on a system catalog and other
concurrent queries; will address that in a separate patch. As a stopgap,
parallel_schedule has been tweaked to run vacuum.sql by itself, to avoid
such failures during the regression tests.
the input values into a string. The two argument version also does the same
thing, but inserts delimiters between elements.
Original patch by Pavel Stehule, reviewed by David E. Wheeler and me.
and implement OVERLAY() for bit strings and bytea.
In passing also convert text OVERLAY() to a true built-in, instead of
relying on a SQL function.
Leonardo F, reviewed by Kevin Grittner
the various disk-size-reporting functions will respond to query cancel
reasonably promptly even in very large databases. Per report from
Kevin Grittner.
pg_constraint before searching pg_trigger. This allows saner handling of
corner cases; in particular we now say "constraint is not deferrable"
rather than "constraint does not exist" when the command is applied to
a constraint that's inherently non-deferrable. Per a gripe several months
ago from hubert depesz lubaczewski.
To make this work without breaking user-defined constraint triggers,
we have to add entries for them to pg_constraint. However, in return
we can remove the pgconstrname column from pg_constraint, which represents
a fairly sizable space savings. I also replaced the tgisconstraint column
with tgisinternal; the old meaning of tgisconstraint can now be had by
testing for nonzero tgconstraint, while there is no other way to get
the old meaning of nonzero tgconstraint, namely that the trigger was
internally generated rather than being user-created.
In passing, fix an old misstatement in the docs and comments, namely that
pg_trigger.tgdeferrable is exactly redundant with pg_constraint.condeferrable.
Actually, we mark RI action triggers as nondeferrable even when they belong to
a nominally deferrable FK constraint. The SET CONSTRAINTS code now relies on
that instead of hard-coding a list of exception OIDs.
can upgrade clusters without renaming the tablespace directories. New
directory structure format is, e.g.:
$PGDATA/pg_tblspc/20981/PG_8.5_201001061/719849/83292814
of the string". The previous coding treated only -1 that way, and would
produce an invalid result value for other negative values.
We ought to fix it so that 2-parameter bit substring() is a different C
function and the 3-parameter form throws error for negative length, but
that takes a pg_proc change which is impractical in the back branches;
and in any case somebody might be relying on -1 working this way.
So just do this as a back-patchable fix.
we're not going to support that anymore.
I did keep the 64-bit-CRC-with-32-bit-arithmetic code, since it has a
performance excuse to live. It's a bit moot since that's all ifdef'd
out, of course.
This patch only supports seq_page_cost and random_page_cost as parameters,
but it provides the infrastructure to scalably support many more.
In particular, we may want to add support for effective_io_concurrency,
but I'm leaving that as future work for now.
Thanks to Tom Lane for design help and Alvaro Herrera for the review.
"column < constant", and the comparison value is in the first or last
histogram bin or outside the histogram entirely, try to fetch the actual
column min or max value using an index scan (if there is an index on the
column). If successful, replace the lower or upper histogram bound with
that value before carrying on with the estimate. This limits the
estimation error caused by moving min/max values when the comparison
value is close to the min or max. Per a complaint from Josh Berkus.
It is tempting to consider using this mechanism for mergejoinscansel as well,
but that would inject index fetches into main-line join estimation not just
endpoint cases. I'm refraining from that until we can get a better handle
on the costs of doing this type of lookup.
This is needed to avoid unwanted interference with SUBSTRING behavior,
as per bug #5257 from Roman Kononov. Also, add some basic intelligence
about character classes (bracket expressions) since we now have several
behaviors that aren't appropriate inside a character class.
As with the previous patch in this area, I'm reluctant to back-patch
since it might affect applications that are relying on the prior
behavior.
