Commit Graph

32 Commits

Author SHA1 Message Date
Bruce Momjian
ca3b37487b Update copyright for 2021
Backpatch-through: 9.5
2021-01-02 13:06:25 -05:00
Andres Freund
dc7420c2c9 snapshot scalability: Don't compute global horizons while building snapshots.
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.

Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.

The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.

The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions.  These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
   are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
   definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.

When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession.  As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.

To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.

This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.

Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.

Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
2020-08-12 16:03:49 -07:00
Thomas Munro
c5315f4f44 Cache smgrnblocks() results in recovery.
Avoid repeatedly calling lseek(SEEK_END) during recovery by caching
the size of each fork.  For now, we can't use the same technique in
other processes, because we lack a shared invalidation mechanism.

Do this by generalizing the pre-existing caching used by FSM and VM
to support all forks.

Discussion: https://postgr.es/m/CAEepm%3D3SSw-Ty1DFcK%3D1rU-K6GSzYzfdD4d%2BZwapdN7dTa6%3DnQ%40mail.gmail.com
2020-07-31 14:29:52 +12:00
Peter Eisentraut
ee0202d552 pgstattuple: Have pgstattuple_approx accept TOAST tables
TOAST tables have a visibility map and a free space map, so they can
be supported by pgstattuple_approx just fine.

Add test cases to show how various pgstattuple functions accept TOAST
tables.  Also add similar tests to pg_visibility, which already
accepted TOAST tables correctly but had no test coverage for them.

Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://www.postgresql.org/message-id/flat/27c4496a-02b9-dc87-8f6f-bddbef54e0fe@2ndquadrant.com
2020-06-30 00:56:43 +02:00
Tom Lane
5cbfce562f Initial pgindent and pgperltidy run for v13.
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.

Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
2020-05-14 13:06:50 -04:00
Noah Misch
c6b92041d3 Skip WAL for new relfilenodes, under wal_level=minimal.
Until now, only selected bulk operations (e.g. COPY) did this.  If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY.  See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules.  Maintainers of table access
methods should examine that section.

To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL.  A new GUC,
wal_skip_threshold, guides that choice.  If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold.  Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.

Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode.  Introduce rd_firstRelfilenodeSubid.  Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node.  Make relcache.c retain entries for certain
dropped relations until end of transaction.

Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.

Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas.  Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem.  Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs.  Reported by Martijn van Oosterhout.

Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
2020-04-04 12:25:34 -07:00
Noah Misch
de9396326e Revert "Skip WAL for new relfilenodes, under wal_level=minimal."
This reverts commit cb2fd7eac2.  Per
numerous buildfarm members, it was incompatible with parallel query, and
a test case assumed LP64.  Back-patch to 9.5 (all supported versions).

Discussion: https://postgr.es/m/20200321224920.GB1763544@rfd.leadboat.com
2020-03-22 09:24:09 -07:00
Noah Misch
cb2fd7eac2 Skip WAL for new relfilenodes, under wal_level=minimal.
Until now, only selected bulk operations (e.g. COPY) did this.  If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY.  See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules.  Maintainers of table access
methods should examine that section.

To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL.  A new GUC,
wal_skip_threshold, guides that choice.  If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold.  Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.

Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode.  Introduce rd_firstRelfilenodeSubid.  Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node.  Make relcache.c retain entries for certain
dropped relations until end of transaction.

Back-patch to 9.5 (all supported versions).  This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC.  As
always, update standby systems before master systems.  This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions.  (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)

Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas.  Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem.  Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs.  Reported by Martijn van Oosterhout.

Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
2020-03-21 09:38:26 -07:00
Bruce Momjian
7559d8ebfa Update copyrights for 2020
Backpatch-through: update all files in master, backpatch legal files through 9.4
2020-01-01 12:21:45 -05:00
Andres Freund
01368e5d9d Split all OBJS style lines in makefiles into one-line-per-entry style.
When maintaining or merging patches, one of the most common sources
for conflicts are the list of objects in makefiles. Especially when
the split across lines has been changed on both sides, which is
somewhat common due to attempting to stay below 80 columns, those
conflicts are unnecessarily laborious to resolve.

By splitting, and alphabetically sorting, OBJS style lines into one
object per line, conflicts should be less frequent, and easier to
resolve when they still occur.

Author: Andres Freund
Discussion: https://postgr.es/m/20191029200901.vww4idgcxv74cwes@alap3.anarazel.de
2019-11-05 14:41:07 -08:00
Fujii Masao
6d05086c0a Speedup truncations of relation forks.
When a relation is truncated, shared_buffers needs to be scanned
so that any buffers for the relation forks are invalidated in it.
Previously, shared_buffers was scanned for each relation forks, i.e.,
MAIN, FSM and VM, when VACUUM truncated off any empty pages
at the end of relation or TRUNCATE truncated the relation in place.
Since shared_buffers needed to be scanned multiple times,
it could take a long time to finish those commands especially
when shared_buffers was large.

This commit changes the logic so that shared_buffers is scanned only
one time for those three relation forks.

Author: Kirk Jamison
Reviewed-by: Masahiko Sawada, Thomas Munro, Alvaro Herrera, Takayuki Tsunakawa and Fujii Masao
Discussion: https://postgr.es/m/D09B13F772D2274BB348A310EE3027C64E2067@g01jpexmbkw24
2019-09-24 17:31:26 +09:00
Tom Lane
8255c7a5ee Phase 2 pgindent run for v12.
Switch to 2.1 version of pg_bsd_indent.  This formats
multiline function declarations "correctly", that is with
additional lines of parameter declarations indented to match
where the first line's left parenthesis is.

Discussion: https://postgr.es/m/CAEepm=0P3FeTXRcU5B2W3jv3PgRVZ-kGUXLGfd42FFhUROO3ug@mail.gmail.com
2019-05-22 13:04:48 -04:00
Andres Freund
c91560defc Move remaining code from tqual.[ch] to heapam.h / heapam_visibility.c.
Given these routines are heap specific, and that there will be more
generic visibility support in via table AM, it makes sense to move the
prototypes to heapam.h (routines like HeapTupleSatisfiesVacuum will
not be exposed in a generic fashion, because they are too storage
specific).

Similarly, the code in tqual.c is specific to heap, so moving it into
access/heap/ makes sense.

Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
2019-01-21 17:07:10 -08:00
Andres Freund
63746189b2 Change snapshot type to be determined by enum rather than callback.
This is in preparation for allowing the same snapshot be used for
different table AMs. With the current callback based approach we would
need one callback for each supported AM, which clearly would not be
extensible.  Thus add a new Snapshot->snapshot_type field, and move
the dispatch into HeapTupleSatisfiesVisibility() (which is now a
function). Later work will then dispatch calls to
HeapTupleSatisfiesVisibility() and other AMs visibility functions
depending on the type of the table.  The central SnapshotType enum
also seems like a good location to centralize documentation about the
intended behaviour of various types of snapshots.

As tqual.h isn't included by bufmgr.h any more (as HeapTupleSatisfies*
isn't referenced by TestForOldSnapshot() anymore) a few files now need
to include it directly.

Author: Andres Freund, loosely based on earlier work by Haribabu Kommi
Discussion:
    https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
    https://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
2019-01-21 17:03:15 -08:00
Andres Freund
4c850ecec6 Don't include heapam.h from others headers.
heapam.h previously was included in a number of widely used
headers (e.g. execnodes.h, indirectly in executor.h, ...). That's
problematic on its own, as heapam.h contains a lot of low-level
details that don't need to be exposed that widely, but becomes more
problematic with the upcoming introduction of pluggable table storage
- it seems inappropriate for heapam.h to be included that widely
afterwards.

heapam.h was largely only included in other headers to get the
HeapScanDesc typedef (which was defined in heapam.h, even though
HeapScanDescData is defined in relscan.h). The better solution here
seems to be to just use the underlying struct (forward declared where
necessary). Similar for BulkInsertState.

Another problem was that LockTupleMode was used in executor.h - parts
of the file tried to cope without heapam.h, but due to the fact that
it indirectly included it, several subsequent violations of that goal
were not not noticed. We could just reuse the approach of declaring
parameters as int, but it seems nicer to move LockTupleMode to
lockoptions.h - that's not a perfect location, but also doesn't seem
bad.

As a number of files relied on implicitly included heapam.h, a
significant number of files grew an explicit include. It's quite
probably that a few external projects will need to do the same.

Author: Andres Freund
Reviewed-By: Alvaro Herrera
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
2019-01-14 16:24:41 -08:00
Bruce Momjian
97c39498e5 Update copyright for 2019
Backpatch-through: certain files through 9.4
2019-01-02 12:44:25 -05:00
Andres Freund
578b229718 Remove WITH OIDS support, change oid catalog column visibility.
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.

This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row.  Neither pg_dump nor COPY included the contents of the
oid column by default.

The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.

WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.

Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
  WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
  issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
  restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
  OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
  plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.

The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.

The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such.  This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.

The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.

Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).

The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.

While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.

Catversion bump, for obvious reasons.

Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
2018-11-20 16:00:17 -08:00
Bruce Momjian
9d4649ca49 Update copyright for 2018
Backpatch-through: certain files through 9.3
2018-01-02 23:30:12 -05:00
Tom Lane
382ceffdf7 Phase 3 of pgindent updates.
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.

By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis.  However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent.  That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.

This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.

This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.

Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
2017-06-21 15:35:54 -04:00
Tom Lane
e3860ffa4d Initial pgindent run with pg_bsd_indent version 2.0.
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:

* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
  sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
  well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
  with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
  than the expected column 33.

On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list.  This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.

There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses.  I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.

Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
2017-06-21 14:39:04 -04:00
Bruce Momjian
a6fd7b7a5f Post-PG 10 beta1 pgindent run
perltidy run not included.
2017-05-17 16:31:56 -04:00
Simon Riggs
25fff40798 Default monitoring roles
Three nologin roles with non-overlapping privs are created by default
* pg_read_all_settings - read all GUCs.
* pg_read_all_stats - pg_stat_*, pg_database_size(), pg_tablespace_size()
* pg_stat_scan_tables - may lock/scan tables

Top level role - pg_monitor includes all of the above by default, plus others

Author: Dave Page
Reviewed-by: Stephen Frost, Robert Haas, Peter Eisentraut, Simon Riggs
2017-03-30 14:18:53 -04:00
Simon Riggs
af4b1a0869 Refactor GetOldestXmin() to use flags
Replace ignoreVacuum parameter with more flexible flags.

Author: Eiji Seki
Review: Haribabu Kommi
2017-03-22 16:51:01 +00:00
Stephen Frost
c08d82f38e Add relkind checks to certain contrib modules
The contrib extensions pageinspect, pg_visibility and pgstattuple only
work against regular relations which have storage.  They don't work
against foreign tables, partitioned (parent) tables, views, et al.

Add checks to the user-callable functions to return a useful error
message to the user if they mistakenly pass an invalid relation to a
function which doesn't accept that kind of relation.

In passing, improve some of the existing checks to use ereport() instead
of elog(), add a function to consolidate common checks where
appropriate, and add some regression tests.

Author: Amit Langote, with various changes by me
Reviewed by: Michael Paquier and Corey Huinker
Discussion: https://postgr.es/m/ab91fd9d-4751-ee77-c87b-4dd704c1e59c@lab.ntt.co.jp
2017-03-09 16:34:25 -05:00
Bruce Momjian
1d25779284 Update copyright via script for 2017 2017-01-03 13:48:53 -05:00
Tom Lane
9a109452da Fix bugs in contrib/pg_visibility.
collect_corrupt_items() failed to initialize tuple.t_self.  While
HeapTupleSatisfiesVacuum() doesn't actually use that value, it does
Assert that it's valid, so that the code would dump core if ip_posid
chanced to be zero.  (That's somewhat unlikely, which probably explains
how this got missed.  In any case it wouldn't matter for field use.)

Also, collect_corrupt_items was returning the wrong TIDs, that is the
contents of t_ctid rather than the tuple's own location.  This would
be the same thing in simple cases, but it could be wrong if, for
example, a past update attempt had been rolled back, leaving a live
tuple whose t_ctid doesn't point at itself.

Also, in pg_visibility(), guard against trying to read a page past
the end of the rel.  The VM code handles inquiries beyond the end
of the map by silently returning zeroes, and it seems like we should
do the same thing here.

I ran into the assertion failure while using pg_visibility to check
pg_upgrade's behavior, and then noted the other problems while
reading the code.

Report: <29043.1475288648@sss.pgh.pa.us>
2016-10-01 16:32:54 -04:00
Robert Haas
71d05a2c7b pg_visibility: Add pg_truncate_visibility_map function.
This requires some core changes as well so that we can properly
WAL-log the truncation.  Specifically, it changes the format of the
XLOG_SMGR_TRUNCATE WAL record, so bump XLOG_PAGE_MAGIC.

Patch by me, reviewed but not fully endorsed by Andres Freund.
2016-06-17 17:37:30 -04:00
Robert Haas
e472ce9624 Add integrity-checking functions to pg_visibility.
The new pg_check_visible() and pg_check_frozen() functions can be used to
verify that the visibility map bits for a relation's data pages match the
actual state of the tuples on those pages.

Amit Kapila and Robert Haas, reviewed (in earlier versions) by Andres
Freund.  Additional testing help by Thomas Munro.
2016-06-15 14:33:58 -04:00
Robert Haas
4bc424b968 pgindent run for 9.6 2016-06-09 18:02:36 -04:00
Kevin Grittner
a343e223a5 Revert no-op changes to BufferGetPage()
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature.  Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming).  The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.

This change should have little or no effect on generated executable
code.

Motivated by the back-patching pain of Tom Lane and Robert Haas
2016-04-20 08:31:19 -05:00
Kevin Grittner
8b65cf4c5e Modify BufferGetPage() to prepare for "snapshot too old" feature
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in.  It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point.  This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third.  The follow-on patch will change the places where the test
needs to be made.
2016-04-08 14:30:10 -05:00
Robert Haas
ba0a198fb1 Add pg_visibility contrib module.
This lets you examine the visibility map as well as page-level
visibility information.  I initially wrote it as a debugging aid,
but was encouraged to polish it for commit.

Patch by me, reviewed by Masahiko Sawada.

Discussion: 56D77803.6080503@BlueTreble.com
2016-03-08 08:42:01 -05:00