Formerly we relied on checking after-the-fact to see if an expression
contained aggregates, window functions, or sub-selects when it shouldn't.
This is grotty, easily forgotten (indeed, we had forgotten to teach
DefineIndex about rejecting window functions), and none too efficient
since it requires extra traversals of the parse tree. To improve matters,
define an enum type that classifies all SQL sub-expressions, store it in
ParseState to show what kind of expression we are currently parsing, and
make transformAggregateCall, transformWindowFuncCall, and transformSubLink
check the expression type and throw error if the type indicates the
construct is disallowed. This allows removal of a large number of ad-hoc
checks scattered around the code base. The enum type is sufficiently
fine-grained that we can still produce error messages of at least the
same specificity as before.
Bringing these error checks together revealed that we'd been none too
consistent about phrasing of the error messages, so standardize the wording
a bit.
Also, rewrite checking of aggregate arguments so that it requires only one
traversal of the arguments, rather than up to three as before.
In passing, clean up some more comments left over from add_missing_from
support, and annotate some tests that I think are dead code now that that's
gone. (I didn't risk actually removing said dead code, though.)
Should be limited to the maximum number of connections excluding
autovacuum workers, not including.
Add similar check for max_wal_senders, which should never be higher than
max_connections.
Previously, the -1 option was silently ignored.
Also, emit an error if -1 is used in a context where it won't be
respected, to avoid user confusion.
Original patch by Fabien COELHO, but this version is quite different
from the original submission.
Now that we are storing structs in these lists, the distinction between
the two lists can be represented with a couple of extra flags while using
only a single list. This simplifies the code and should save a little
bit of palloc traffic, since the majority of RTEs are represented in both
lists anyway.
Cascading replication copied the incoming file into pg_xlog but
didn't set path correctly, so the first attempt to open file failed
causing it to loop around and look for file in pg_xlog. So the
earlier coding worked, but accidentally rather than by design.
Spotted by Fujii Masao, fix by Fujii Masao and Simon Riggs
This was broken in commit ed0b409d22,
which revised the GlobalTransactionData struct to not include the
associated PGPROC as its first member, but overlooked one place where
a cast was used in reliance on that equivalence.
The most effective way of fixing this seems to be to create a new function
that looks up the GlobalTransactionData struct given the XID, and make
both TwoPhaseGetDummyBackendId and TwoPhaseGetDummyProc rely on that.
Per report from Robert Ross.
This patch implements the standard syntax of LATERAL attached to a
sub-SELECT in FROM, and also allows LATERAL attached to a function in FROM,
since set-returning function calls are expected to be one of the principal
use-cases.
The main change here is a rewrite of the mechanism for keeping track of
which relations are visible for column references while the FROM clause is
being scanned. The parser "namespace" lists are no longer lists of bare
RTEs, but are lists of ParseNamespaceItem structs, which carry an RTE
pointer as well as some visibility-controlling flags. Aside from
supporting LATERAL correctly, this lets us get rid of the ancient hacks
that required rechecking subqueries and JOIN/ON and function-in-FROM
expressions for invalid references after they were initially parsed.
Invalid column references are now always correctly detected on sight.
In passing, remove assorted parser error checks that are now dead code by
virtue of our having gotten rid of add_missing_from, as well as some
comments that are obsolete for the same reason. (It was mainly
add_missing_from that caused so much fudging here in the first place.)
The planner support for this feature is very minimal, and will be improved
in future patches. It works well enough for testing purposes, though.
catversion bump forced due to new field in RangeTblEntry.
We seem to have a rough policy that our Perl scripts should work with
Perl 5.8, so make this one do so. Main change is to not use the newfangled
\h character class in regexes; "[ \t]" is a serviceable replacement.
century specifications just like positive/AD centuries. Previously the
behavior was either wrong or inconsistent with positive/AD handling.
Centuries without years now always assume the first year of the century,
which is now documented.
In particular, with a controlled shutdown of the master, pg_basebackup
with streaming log could terminate without an error message, even though
the backup is not consistent.
In passing, fix a few cases where walfile wasn't properly set to -1 after
closing.
Fujii Masao
We used to convert the unicode object directly to a string in the server
encoding by calling Python's PyUnicode_AsEncodedString function. In other
words, we used Python's routines to do the encoding. However, that has a
few problems. First of all, it required keeping a mapping table of Python
encoding names and PostgreSQL encodings. But the real killer was that Python
doesn't support EUC_TW and MULE_INTERNAL encodings at all.
Instead, convert the Python unicode object to UTF-8, and use PostgreSQL's
encoding conversion functions to convert from UTF-8 to server encoding. We
were already doing the same in the other direction in PLyUnicode_FromString,
so this is more consistent, too.
Note: This makes SQL_ASCII to behave more leniently. We used to map
SQL_ASCII to Python's 'ascii', which on Python means strict 7-bit ASCII
only, so you got an error if the python string contained anything but pure
ASCII. You no longer get an error; you get the UTF-8 representation of the
string instead.
Backpatch to 9.0, where these conversions were introduced.
Jan Urbański
DecodeInterval() failed to honor the "range" parameter (the special SQL
syntax for indicating which fields appear in the literal string) if the
time was signed. This seems inappropriate, so make it work like the
not-signed case. The inconsistency was introduced in my commit
f867339c01, which as noted in its log message
was only really focused on making SQL-compliant literals work per spec.
Including a sign here is not per spec, but if we're going to allow it
then it's reasonable to expect it to work like the not-signed case.
Also, remove bogus setting of tmask, which caused subsequent processing to
think that what had been given was a timezone and not an hh:mm(:ss) field,
thus confusing checks for redundant fields. This seems to be an aboriginal
mistake in Lockhart's commit 2cf1642461.
Add regression test cases to illustrate the changed behaviors.
Back-patch as far as 8.4, where support for spec-compliant interval
literals was added.
Range problem reported and diagnosed by Amit Kapila, tmask problem by me.
As noted by Noah Misch, btree_xlog_delete_get_latestRemovedXid is
critically dependent on the assumption that it's examining a consistent
state of the database. This was undocumented though, so the
seemingly-unrelated check for no active HS sessions might be thought to be
merely an optional optimization. Improve comments, and add an explicit
check of reachedConsistency just to be sure.
This function returns InvalidTransactionId (thereby killing all HS
transactions) in several cases that are not nearly unlikely enough for my
taste. This commit doesn't attempt to fix those deficiencies, just
document them.
Back-patch to 9.2, not from any real functional need but just to keep the
branches more closely synced to simplify possible future back-patching.
In yesterday's commit 962e0cc71e, I added the
ResolveRecoveryConflictWithSnapshot call in the wrong place. I correctly
put it before spgRedoVacuumRedirect itself would modify the index page ---
but not before RestoreBkpBlocks, so replay of a record with a full-page
image would modify the page before kicking off any conflicting HS
transactions. Oops.
The correct test for whether a redirection tuple is removable is whether
tuple's xid < RecentGlobalXmin, not OldestXmin; the previous coding
failed to protect index searches being done in concurrent transactions that
have no XID. This mirrors the recent fix in btree's page recycling logic
made in commit d3abbbebe5.
Also, WAL-log the newest XID of any removed redirection tuple on an index
page, and apply ResolveRecoveryConflictWithSnapshot during InHotStandby WAL
replay. This protects against concurrent Hot Standby transactions possibly
needing to see the redirection tuple(s).
Per my query of 2012-03-12 and subsequent discussion.
After taking awhile to digest the row-processor feature that was added to
libpq in commit 92785dac2e, we've concluded
it is over-complicated and too hard to use. Leave the core infrastructure
changes in place (that is, there's still a row processor function inside
libpq), but remove the exposed API pieces, and instead provide a "single
row" mode switch that causes PQgetResult to return one row at a time in
separate PGresult objects.
This approach incurs more overhead than proper use of a row processor
callback would, since construction of a PGresult per row adds extra cycles.
However, it is far easier to use and harder to break. The single-row mode
still affords applications the primary benefit that the row processor API
was meant to provide, namely not having to accumulate large result sets in
memory before processing them. Preliminary testing suggests that we can
probably buy back most of the extra cycles by micro-optimizing construction
of the extra results, but that task will be left for another day.
Marko Kreen
Parse analysis neglected to cover the case of a WITH clause attached to an
intermediate-level set operation; it only handled WITH at the top level
or WITH attached to a leaf-level SELECT. Per report from Adam Mackler.
In HEAD, I rearranged the order of SelectStmt's fields to put withClause
with the other fields that can appear on non-leaf SelectStmts. In back
branches, leave it alone to avoid a possible ABI break for third-party
code.
Back-patch to 8.4 where WITH support was added.
In the original coding of the log rotation stuff, we did not bother to make
the truncation logic work for the very first rotation after postmaster
start (or after a syslogger crash and restart). It just always appended
in that case. It did not seem terribly important at the time, but we've
recently had two separate complaints from people who expected it to work
unsurprisingly. (Both users tend to restart the postmaster about as often
as a log rotation is configured to happen, which is maybe not typical use,
but still...) Since the initial log file is opened in the postmaster,
fixing this requires passing down some more state to the syslogger child
process.
It's always been like this, so back-patch to all supported branches.
The most user-visible part of this is to change the long options
--statusint and --noloop to --status-interval and --no-loop,
respectively, per discussion.
Also, consistently enclose file names in double quotes, per our
conventions; and consistently use the term "transaction log file" to
talk about WAL segments. (Someday we may need to go over this
terminology and make it consistent across the whole source code.)
Finally, reflow the code to better fit in 80 columns, and have pgindent
fix it up some more.
This function suppressed any stderr output from the called program, which
is unnecessary in the normal case and unhelpful in error cases. It also
gave a rather opaque message along the lines of "fgets failure: Success"
in case the called program failed to return anything on stdout. Since
we've seen multiple reports of people not understanding what's wrong when
pg_ctl reports this, improve the message.
Back-patch to all active branches.
In the original coding of the autovacuum cancel feature, commit
acac68b2bc, an autovacuum process was
considered a target for cancellation if it was found to hard-block any
process examined in the deadlock search. This patch tightens the test so
that the autovacuum must directly hard-block the current process. This
should make the behavior more predictable in general, and in particular
it ensures that an autovacuum will not be canceled with less than
deadlock_timeout grace period. In the old coding, it was possible for an
autovacuum to be canceled almost instantly, given unfortunate timing of two
or more other processes' lock attempts.
This also justifies the logging methodology in the recent commit
d7318d43d891bd63e82dcfc27948113ed7b1db80; without this restriction, that
patch isn't providing enough information to see the connection of the
canceling process to the autovacuum. Like that one, patch all the way
back.
The old message was at DEBUG2, so typically it didn't show up in the
log at all. As a result, in most cases where autovacuum was canceled,
the only information that was logged was the table being vacuumed,
with no indication as to what problem caused the cancel. Crank up
the level to LOG and add some more details to assist with debugging.
Back-patch all the way, per discussion on pgsql-hackers.
If a crash occurred immediately after the first nextval() call for a serial
column, WAL replay would restore the sequence to a state in which it
appeared that no nextval() had been done, thus allowing the first sequence
value to be returned again by the next nextval() call; as reported in
bug #6748 from Xiangming Mei.
More generally, the problem would occur if an ALTER SEQUENCE was executed
on a freshly created or reset sequence. (The manifestation with serial
columns was introduced in 8.2 when we added an ALTER SEQUENCE OWNED BY step
to serial column creation.) The cause is that sequence creation attempted
to save one WAL entry by writing out a WAL record that made it appear that
the first nextval() had already happened (viz, with is_called = true),
while marking the sequence's in-database state with log_cnt = 1 to show
that the first nextval() need not emit a WAL record. However, ALTER
SEQUENCE would emit a new WAL entry reflecting the actual in-database state
(with is_called = false). Then, nextval would allocate the first sequence
value and set is_called = true, but it would trust the log_cnt value and
not emit any WAL record. A crash at this point would thus restore the
sequence to its post-ALTER state, causing the next nextval() call to return
the first sequence value again.
To fix, get rid of the idea of logging an is_called status different from
reality. This means that the first nextval-driven WAL record will happen
at the first nextval call not the second, but the marginal cost of that is
pretty negligible. In addition, make sure that ALTER SEQUENCE resets
log_cnt to zero in any case where it touches sequence parameters that
affect future nextval results. This will result in some user-visible
changes in the contents of a sequence's log_cnt column, as reflected in the
patch's regression test changes; but no application should be depending on
that anyway, since it was already true that log_cnt changes rather
unpredictably depending on checkpoint timing.
In addition, make some basically-cosmetic improvements to get rid of
sequence.c's undesirable intimacy with page layout details. It was always
really trying to WAL-log the contents of the sequence tuple, so we should
have it do that directly using a HeapTuple's t_data and t_len, rather than
backing into it with some magic assumptions about where the tuple would be
on the sequence's page.
Back-patch to all supported branches.
The initially implemented syntax, "CHECK NO INHERIT (expr)" was not
deemed very good, so switch to "CHECK (expr) NO INHERIT" instead. This
way it looks similar to SQL-standards compliant constraint attribute.
Backport to 9.2 where the new syntax and feature was introduced.
Per discussion.
Commit f5bcd398ad introduced a test using
a table named "circles" in inherit.sql. Unfortunately, the concurrently
executed constraints test was already using that table name, so the
parallel regression tests would sometimes fail. Rename table to dodge
the problem. Per buildfarm.
We should avoid calling sync_file_range or posix_fadvise in this case,
since (a) we don't really care if the data gets synced, and might as
well save the kernel calls; (b) at least on Linux we know that the
kernel might block us until it's scheduled the write.
Also, avoid making a useless second traversal of the directory tree
if we're not actually going to call fsync(2) after all.
We left this out of commit b966dd6c42
so as to get some more buildfarm testing of the new fsync code in initdb.
But since no problems have turned up, it's probably time to save the
cycles.
Antique versions of gcc complain about vars that are initialized outside
PG_TRY and then modified within it. Rather than marking the var volatile,
expend one more line of code.
We made use of the ROWS estimate for set-returning functions used in FROM,
but not for those used in SELECT targetlists; which is a bit of an
oversight considering there are common usages that require the latter
approach. Improve that. (I had initially thought it might be worth
folding this into cost_qual_eval, but after investigation concluded that
that wouldn't be very helpful, so just do it separately.) Per complaint
from David Johnston.
Back-patch to 9.2, but not further, for fear of destabilizing plan choices
in existing releases.
Commit 3a0e4d36eb arranged to
reference stack-allocated variables after they were out of scope.
That's no good, so let's arrange to not do that after all.
There is no point in running this test when prepared transactions are disabled,
which is the default. New make targets that include the test are provided. This
will save some useless waste of cycles on buildfarm machines.
Backpatch to 9.1 where these tests were introduced.
Bruce Momjian
Tom Lane
Magnus Hagander
Simon Riggs
Robert Haas
Alvaro Herrera
Heikki Linnakangas
Peter Eisentraut
Andrew Dunstan