The order of AuthenticationGSSContinue and AuthenticationSSPI was
swapped, based on the other Authentication* protocol messages being
listed in subcode order.
ECPG's PREPARE ... FROM and EXECUTE IMMEDIATE can optionally take
the target query as a simple literal, rather than the more usual
string-variable reference. This was previously documented as
being a C string literal, but that's a lie in one critical respect:
you can't write a data double quote as \" in such literals. That's
because the lexer is in SQL mode at this point, so it'll parse
double-quoted strings as SQL identifiers, within which backslash
is not special, so \" ends the literal.
I looked into making this work as documented, but getting the lexer
to switch behaviors at just the right point is somewhere between
very difficult and impossible. It's not really worth the trouble,
because these cases are next to useless: if you have a fixed SQL
statement to execute or prepare, you might as well write it as
a direct EXEC SQL, saving the messiness of converting it into
a string literal and gaining the opportunity for compile-time
SQL syntax checking.
Instead, let's just document (and test) the workaround of writing
a double quote as an octal escape (\042) in such cases.
There's no code behavioral change here, so in principle this could
be back-patched, but it's such a niche case I doubt it's worth
the trouble.
Per report from 1250kv.
Discussion: https://postgr.es/m/673825.1603223178@sss.pgh.pa.us
If you write the literal 'abc''def' in an EXEC SQL command, that will
come out the other end as 'abc'def', triggering a syntax error in the
backend. Likewise, "abc""def" is reduced to "abc"def" which is wrong
syntax for a quoted identifier.
The cause is that the lexer thinks it should emit just one quote
mark, whereas what it really should do is keep the string as-is.
Add some docs and test cases, too.
Although this seems clearly a bug, I fear users wouldn't appreciate
changing it in minor releases. Some may well be working around it
by applying an extra doubling of affected quotes, as for example
sql/dyntest.pgc has been doing.
Per investigation of a report from 1250kv, although this isn't
exactly what he/she was on about.
Discussion: https://postgr.es/m/673825.1603223178@sss.pgh.pa.us
The check for whether to complain about not having an old connection
to get parameters from was seriously out of date: it had not been
rethought when we invented connstrings, nor when we invented the
-reuse-previous option. Replace it with a check that throws an
error if reuse-previous is active and we lack an old connection to
reuse. While that doesn't move the goalposts very far in terms of
easing reconnection after a server crash, at least it's consistent.
If the user specifies a connstring plus additional parameters
(which is invalid per the documentation), the extra parameters were
silently ignored. That seems like it could be really confusing,
so let's throw a syntax error instead.
Teach the connstring code path to re-use the old connection's password
in the same cases as the old-style-syntax code path would, ie if we
are reusing parameters and the values of username, host/hostaddr, and
port are not being changed. Document this behavior, too, since it was
unmentioned before. Also simplify the implementation a bit, giving
rise to two new and useful properties: if there's a "password=xxx" in
the connstring, we'll use it not ignore it, and by default (i.e.,
except with --no-password) we will prompt for a password if the
re-used password or connstring password doesn't work. The previous
code just failed if the re-used password didn't work.
Given the paucity of field complaints about these issues, I don't
think that they rise to the level of back-patchable bug fixes,
and in any case they might represent undesirable behavior changes
in minor releases. So no back-patch.
Discussion: https://postgr.es/m/235210.1603321144@sss.pgh.pa.us
psql's \connect claims to be able to re-use previous connection
parameters, but in fact it only re-uses the database name, user name,
host name (and possibly hostaddr, depending on version), and port.
This is problematic for assorted use cases. Notably, pg_dump[all]
emits "\connect databasename" commands which we would like to have
re-use all other parameters. If such a script is loaded in a psql run
that initially had "-d connstring" with some non-default parameters,
those other parameters would be lost, potentially causing connection
failure. (Thus, this is the same kind of bug addressed in commits
a45bc8a4f and 8e5793ab6, although the details are much different.)
To fix, redesign do_connect() so that it pulls out all properties
of the old PGconn using PQconninfo(), and then replaces individual
properties in that array. In the case where we don't wish to re-use
anything, get libpq's default settings using PQconndefaults() and
replace entries in that, so that we don't need different code paths
for the two cases.
This does result in an additional behavioral change for cases where
the original connection parameters allowed multiple hosts, say
"psql -h host1,host2", and the \connect request allows re-use of the
host setting. Because the previous coding relied on PQhost(), it
would only permit reconnection to the same host originally selected.
Although one can think of scenarios where that's a good thing, there
are others where it is not. Moreover, that behavior doesn't seem to
meet the principle of least surprise, nor was it documented; nor is
it even clear it was intended, since that coding long pre-dates the
addition of multi-host support to libpq. Hence, this patch is content
to drop it and re-use the host list as given.
Per Peter Eisentraut's comments on bug #16604. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/16604-933f4b8791227b15@postgresql.org
Change the attribute 'name' to 'slot_name' in pg_stat_replication_slots
view to make it clear and that way we will be consistent with the other
places like pg_stat_wal_receiver view where we display the same attribute.
In the passing, fix the typo in one of the macros in the related code.
Bump the catversion as we have modified the name in the catalog as well.
Reported-by: Noriyoshi Shinoda
Author: Noriyoshi Shinoda
Reviewed-by: Sawada Masahiko and Amit Kapila
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
When told to process all databases, clusterdb, reindexdb, and vacuumdb
would reconnect by replacing their --maintenance-db parameter with the
name of the target database. If that parameter is a connstring (which
has been allowed for a long time, though we failed to document that
before this patch), we'd lose any other options it might specify, for
example SSL or GSS parameters, possibly resulting in failure to connect.
Thus, this is the same bug as commit a45bc8a4f fixed in pg_dump and
pg_restore. We can fix it in the same way, by using libpq's rules for
handling multiple "dbname" parameters to add the target database name
separately. I chose to apply the same refactoring approach as in that
patch, with a struct to handle the command line parameters that need to
be passed through to connectDatabase. (Maybe someday we can unify the
very similar functions here and in pg_dump/pg_restore.)
Per Peter Eisentraut's comments on bug #16604. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/16604-933f4b8791227b15@postgresql.org
- Misc grammar and punctuation fixes.
- Stylistic cleanup: use spaces between function arguments and JSON fields
in examples. For example "foo(a,b)" -> "foo(a, b)". Add semicolon after
last END in a few PL/pgSQL examples that were missing them.
- Make sentence that talked about "..." and ".." operators more clear,
by avoiding to end the sentence with "..". That makes it look the same
as "..."
- Fix syntax description for HAVING: HAVING conditions cannot be repeated
Patch by Justin Pryzby, per Yaroslav Schekin's report. Backpatch to all
supported versions, to the extent that the patch applies easily.
Discussion: https://www.postgresql.org/message-id/20201005191922.GE17626%40telsasoft.com
The rules to choose the number of parallel workers to perform parallel
vacuum operation were not clearly specified.
Reported-by: Peter Eisentraut
Author: Amit Kapila
Backpatch-through: 13, where it was introduced
Discussion: https://postgr.es/m/36aa8aea-61b7-eb3c-263b-648e0cb117b7@2ndquadrant.com
The Windows documentation insists that every WSAStartup call should
have a matching WSACleanup call. However, if that ever had actual
relevance, it wasn't in this century. Every remotely-modern Windows
kernel is capable of cleaning up when a process exits without doing
that, and must be so to avoid resource leaks in case of a process
crash. Moreover, Postgres backends have done WSAStartup without
WSACleanup since commit 4cdf51e64 in 2004, and we've never seen any
indication of a problem with that.
libpq's habit of doing WSAStartup during connection start and
WSACleanup during shutdown is also rather inefficient, since a
series of non-overlapping connection requests leads to repeated,
quite expensive DLL unload/reload cycles. We document a workaround
for that (having the application call WSAStartup for itself), but
that's just a kluge. It's also worth noting that it's far from
uncommon for applications to exit without doing PQfinish, and
we've not heard reports of trouble from that either.
However, the real reason for acting on this is that recent
experiments by Alexander Lakhin suggest that calling WSACleanup
during PQfinish might be triggering the symptom we occasionally see
that a process using libpq fails to emit expected stdio output.
Therefore, let's change libpq so that it calls WSAStartup only
once per process, during the first connection attempt, and never
calls WSACleanup at all.
While at it, get rid of the only other WSACleanup call in our code
tree, in pg_dump/parallel.c; that presumably is equally useless.
If this proves to suppress the fairly-common ecpg test failures
we see on Windows, I'll back-patch, but for now let's just do it
in HEAD and see what happens.
Discussion: https://postgr.es/m/ac976d8c-03df-d6b8-025c-15a2de8d9af1@postgrespro.ru
Section 8.5.1.4, which defines these literals, made only a vague
reference to the fact that they might be evaluated too soon to be
safe in non-interactive contexts. Provide a more explicit caution
against misuse. Also, generalize the wording in the related tip in
section 9.9.4: while it clearly described this problem, it implied
(or really, stated outright) that the problem only applies to table
DEFAULT clauses.
Per gripe from Tijs van Dam. Back-patch to all supported branches.
Discussion: https://postgr.es/m/c2LuRv9BiRT3bqIo5mMQiVraEXey_25B4vUn0kDqVqilwOEu_iVF1tbtvLnyQK7yDG3PFaz_GxLLPil2SDkj1MCObNRVaac-7j1dVdFERk8=@thalex.com
Commit a97e85f2b caused "exceed the available area" warnings in PDF
builds. Fine-tune colwidth values to avoid that.
Back-patch to 9.6, like the prior patch. (This is of dubious value
before v13, since we were far from free of such warnings in older
branches. But we might as well keep the SGML looking the same in all
branches.)
Per buildfarm.
Previously it was documented that toast_tuple_target affected column
marked as only External or Extended. But this description is not correct
and toast_tuple_target affects also column marked as Main.
Back-patch to v11 where toast_tuple_target reloption was introduced.
Author: Shinya Okano
Reviewed-by: Tatsuhito Kasahara, Fujii Masao
Discussion: https://postgr.es/m/93f46e311a67422e89e770d236059817@oss.nttdata.com
I removed the duplicate command tags for START_REPLICATION inadvertently
in commit 07082b08cc, but the replication protocol requires them. The
fact that the replication protocol was broken was not noticed because
all our test cases use an optimized code path that exits early, failing
to verify that the behavior is correct for non-optimized cases. Put
them back.
Also document this protocol quirk.
Add a test case that shows the failure. It might still succeed even
without the patch when run on a fast enough server, but it suffices to
show the bug in enough cases that it would be noticed in buildfarm.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Henry Hinze <henry.hinze@gmail.com>
Reviewed-by: Petr Jelínek <petr.jelinek@2ndquadrant.com>
Discussion: https://postgr.es/m/16643-eaadeb2a1a58d28c@postgresql.org
FDWs that can perform an UPDATE/DELETE remotely using the "direct modify"
set of APIs need to access the ResultRelInfo of the target table. That's
currently available in EState.es_result_relation_info, but the next
commit will remove that field.
This commit adds a new resultRelation field in ForeignScan, to store the
target relation's RT index, and the corresponding ResultRelInfo in
ForeignScanState. The FDW's PlanDirectModify callback is expected to set
'resultRelation' along with 'operation'. The core code doesn't need them
for anything, they are for the convenience of FDW's Begin- and
IterateDirectModify callbacks.
Authors: Amit Langote, Etsuro Fujita
Discussion: https://www.postgresql.org/message-id/CA%2BHiwqGEmiib8FLiHMhKB%2BCH5dRgHSLc5N5wnvc4kym%2BZYpQEQ%40mail.gmail.com
Commit 16fa9b2b3 broke the ability to reliably test GiST buffered builds,
because it caused sorted builds to be done instead if sortsupport is
available, regardless of any attempt to override that. While a would-be
test case could try to work around that by choosing an opclass that has
no sortsupport function, coverage would be silently lost the moment
someone decides it'd be a good idea to add a sortsupport function.
Hence, rearrange the logic in gistbuild() so that if "buffering = on"
is specified in CREATE INDEX, we will use that method, sortsupport or no.
Also document the interaction between sorting and the buffering
parameter, as 16fa9b2b3 failed to do.
(Note that in fact we still lack any test coverage of buffered builds,
but this is a prerequisite to adding a non-fragile test.)
Discussion: https://postgr.es/m/3249980.1602532990@sss.pgh.pa.us
Adjust the existing cycle detection example and test queries to put
the cycle column before the path column. This is mainly because the
SQL-standard CYCLE clause puts them in that order, and so if we added
that feature that would make the sequence of examples more consistent
and easier to follow.
Discussion: https://www.postgresql.org/message-id/c5603982-0088-7f14-0caa-fdcd0c837b57@2ndquadrant.com
This adds the statistics about transactions spilled to disk from
ReorderBuffer. Users can query the pg_stat_replication_slots view to check
these stats and call pg_stat_reset_replication_slot to reset the stats of
a particular slot. Users can pass NULL in pg_stat_reset_replication_slot
to reset stats of all the slots.
This commit extends the statistics collector to track this information
about slots.
Author: Sawada Masahiko and Amit Kapila
Reviewed-by: Amit Kapila and Dilip Kumar
Discussion: https://postgr.es/m/CA+fd4k5_pPAYRTDrO2PbtTOe0eHQpBvuqmCr8ic39uTNmR49Eg@mail.gmail.com
Since PG 12, clientcert no longer supported only on/off, so remove 1/0
as possible values, and instead support only the text strings
'verify-ca' and 'verify-full'.
Remove support for 'no-verify' since that is possible by just not
specifying clientcert.
Also, throw an error if 'verify-ca' is used and 'cert' authentication is
used, since cert authentication requires verify-full.
Also improve the docs.
THIS IS A BACKWARD INCOMPATIBLE API CHANGE.
Reported-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/20200716.093012.1627751694396009053.horikyota.ntt@gmail.com
Author: Kyotaro Horiguchi
Backpatch-through: master
The descriptions of make_interval() and pg_options_to_table()
were randomly different from the reality embedded in pg_proc.
(These are not all the discrepancies I found in a quick search,
but the others perhaps require more discussion, since there's
at least a case to be made for changing pg_proc not the docs.)
make_interval issue noted by Thomas Kellerer.
Discussion: https://postgr.es/m/7b154ef0-9f22-90b9-7734-4bf23686695b@gmx.net
Unlike for functions, OUT parameters for procedures are part of the
signature. Therefore, they have to be listed in pg_proc.proargtypes
as well as mentioned in ALTER PROCEDURE and DROP PROCEDURE.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/2b8490fe-51af-e671-c504-47359dc453c5@2ndquadrant.com
The BKI file's string quoting conventions were previously quite weird,
perhaps as a result of repurposing a function built to scan
single-quoted strings to scan double-quoted ones. Change to use the
same rules as we use in GUC files, allowing some simplifications in
genbki.pl and initdb.c.
While at it, completely remove the backend's scanstr() function, which
was essentially a duplicate of the string dequoting code in guc-file.l.
Instead export that one (under a less generic name than it had) and let
bootscanner.l use it. Now we can clarify that scansup.c exists only to
support the main lexer. We could alternatively have removed GUC_scanstr,
but this way seems better since the previous arrangement could mislead
a reader into thinking that scanstr() had something to do with the main
lexer's handling of string literals. Maybe it did once, but if so it
was a long time ago.
This patch does not bump catversion, since the initially-installed
catalog contents don't change. Note however that successful initdb
after applying this patch will require up-to-date postgres.bki as well
as postgres and initdb executables.
In passing, remove a bunch of very-long-obsolete #include's in
bootparse.y and bootscanner.l.
John Naylor
Discussion: https://postgr.es/m/CACPNZCtDpd18T0KATTmCggO2GdVC4ow86ypiq5ENff1VnauL8g@mail.gmail.com
SQL commands are generally marked up as <command>, except when a link
to a reference page is used using <xref>. But the latter doesn't
create monospace markup, so this looks strange especially when a
paragraph contains a mix of links and non-links.
We considered putting <command> in the <refentrytitle> on the target
side, but that creates some formatting side effects elsewhere.
Generally, it seems safer to solve this on the link source side.
We can't put the <xref> inside the <command>; the DTD doesn't allow
this. DocBook 5 would allow the <command> to have the linkend
attribute itself, but we are not there yet.
So to solve this for now, convert the <xref>s to <link> plus
<command>. This gives the correct look and also gives some more
flexibility what we can put into the link text (e.g., subcommands or
other clauses). In the future, these could then be converted to
DocBook 5 style.
I haven't converted absolutely all xrefs to SQL command reference
pages, only those where we care about the appearance of the link text
or where it was otherwise appropriate to make the appearance match a
bit better. Also in some cases, the links where repetitive, so in
those cases the links where just removed and replaced by a plain
<command>. In cases where we just want the link and don't
specifically care about the generated link text (typically phrased
"for further information see <xref ...>") the xref is kept.
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/87o8pco34z.fsf@wibble.ilmari.org
This clarifies some wording in the description of the options available
as replication solutions. While on it, this replaces some instances of
"master" with "primary", for consistency with recent changes like
9e101cf.
Author: Robert Treat
Reviewed-by: Magnus Hagander, Michael Paquier
Discussion: https://postgr.es/m/CAJSLCQ2TPaK_K8raofCamrqELCxY-H6mJrpDNRzc-LKpPY7c+g@mail.gmail.com
This view shows the statistics about WAL activity. Currently it has only
two columns: wal_buffers_full and stats_reset. wal_buffers_full column
indicates the number of times WAL data was written to the disk because
WAL buffers got full. This information is useful when tuning wal_buffers.
stats_reset column indicates the time at which these statistics were
last reset.
pg_stat_wal view is also the basic infrastructure to expose other
various statistics about WAL activity later.
Bump PGSTAT_FILE_FORMAT_ID due to the change in pgstat format.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-by: Takayuki Tsunakawa, Kyotaro Horiguchi, Amit Kapila, Fujii Masao
Discussion: https://postgr.es/m/188bd3f2d2233cf97753b5ced02bb050@oss.nttdata.com
Previously, a conversion such as
to_date('-44-02-01','YYYY-MM-DD')
would result in '0045-02-01 BC', as the code attempted to interpret
the negative year as BC, but failed to apply the correction needed
for our internal handling of BC years. Fix the off-by-one problem.
Also, arrange for the combination of a negative year and an
explicit "BC" marker to cancel out and produce AD. This is how
the negative-century case works, so it seems sane to do likewise.
Continue to read "year 0000" as 1 BC. Oracle would throw an error,
but we've accepted that case for a long time so I'm hesitant to
change it in a back-patch.
Per bug #16419 from Saeed Hubaishan. Back-patch to all supported
branches.
Dar Alathar-Yemen and Tom Lane
Discussion: https://postgr.es/m/16419-d8d9db0a7553f01b@postgresql.org
For some reason, the id of the description of
max_parallel_maintenance_workers has been
guc-max-parallel-workers-maintenance since the beginning. Flip that
around to make it consistent.
Explicitly mention that primary key constraints are also included in the
limitation that the constraint columns must be a superset of the partition key
columns.
Wording suggestion from Tom Lane.
Discussion: https://postgr.es/m/64062533.78364.1601415362244@mail.yahoo.com
Backpatch-through: 11, where unique constraints on partitioned tables were added
Previously we threw an error. But make_date already allowed the case,
so it is inconsistent as well as unhelpful for make_timestamp not to.
Both functions continue to reject year zero.
Code and test fixes by Peter Eisentraut, doc changes by me
Discussion: https://postgr.es/m/13c0992c-f15a-a0ca-d839-91d3efd965d9@2ndquadrant.com
Previously the standby server didn't archive timeline history files
streamed from the primary even when archive_mode is set to "always",
while it archives the streamed WAL files. This could cause the PITR to
fail because there was no required timeline history file in the archive.
The cause of this issue was that walreceiver didn't mark those files as
ready for archiving.
This commit makes walreceiver mark those streamed timeline history
files as ready for archiving if archive_mode=always. Then the archiver
process archives the marked timeline history files.
Back-patch to all supported versions.
Reported-by: Grigory Smolkin
Author: Grigory Smolkin, Fujii Masao
Reviewed-by: David Zhang, Anastasia Lubennikova
Discussion: https://postgr.es/m/54b059d4-2b48-13a4-6f43-95a087c92367@postgrespro.ru
You can use this to view the contents of the time to XID mapping
which the server maintains when old_snapshot_threshold != -1.
Being able to view that information may be interesting for users,
and it's definitely useful for figuring out whether the mapping
is being maintained correctly. It isn't, so that will need to be
fixed in a subsequent commit.
Patch by me, reviewed by Thomas Munro, Dilip Kumar, Hamid Akhtar.
Discussion: http://postgr.es/m/CA+TgmoY=aqf0zjTD+3dUWYkgMiNDegDLFjo+6ze=Wtpik+3XqA@mail.gmail.com
Up to now, if you tried to omit "AS" before a column label in a SELECT
list, it would only work if the column label was an IDENT, that is not
any known keyword. This is rather unfriendly considering that we have
so many keywords and are constantly growing more. In the wake of commit
1ed6b8956 it's possible to improve matters quite a bit.
We'd originally tried to make this work by having some of the existing
keyword categories be allowed without AS, but that didn't work too well,
because each category contains a few special cases that don't work
without AS. Instead, invent an entirely orthogonal keyword property
"can be bare column label", and mark all keywords that way for which
we don't get shift/reduce errors by doing so.
It turns out that of our 450 current keywords, all but 39 can be made
bare column labels, improving the situation by over 90%. This number
might move around a little depending on future grammar work, but it's
a pretty nice improvement.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
Peter Eisentraut
Heikki Linnakangas
Tom Lane
Robert Haas
Amit Kapila
Magnus Hagander
Bruce Momjian
Fujii Masao
Alvaro Herrera
Michael Paquier
David Rowley