under libdir, for a cleaner separation in the installation layout
and compatibility with binary packaging standards. Point backend's
default search location there. The contrib modules are also
installed in the said location, giving them the benefit of the
default search path as well. No changes in user interface
nevertheless.
>
> 1. Now outputs '\\' instead of '\134' when using encode(bytea, 'escape')
> Note that I ended up leaving \0 as \000 so that there are no ambiguities
> when decoding something like, for example, \0123.
>
> 2. Fixed bug in byteain which allowed input values which were not valid
> octals (e.g. \789), to be parsed as if they were octals.
>
> Joe
>
Here's rev 2 of the bytea string support patch. Changes:
1. Added missing declaration for MatchBytea function
2. Added PQescapeBytea to fe-exec.c
3. Applies cleanly on cvs tip from this afternoon
I'm hoping that someone can review/approve/apply this before beta starts, so
I guess I'd vote (not that it counts for much) to delay beta a few days :-)
Joe Conway
Given the following table:
test=# \d f
Table "f"
Column | Type | Modifiers
--------+---------+-----------
i | integer |
test | text |
If I do the following:
test=# insert into f values(1,'test');
INSERT 139549 1
test=# select i::int8,test from f;
?column? | test
----------+------
1 | test
(1 row)
It doesn't make much sense that the first column should be called
'?column?'.
The patch results in the output appearing like this:
test=# select i::int8,test from f;
i | test
---+------
1 | test
(1 row)
----------
Gavin Sherry
Assign the fixed user id 1 to the user created by initdb.
A stand-alone backend will always set the user id to 1.
(Consequently, the name of that user is no longer important.)
In stand-alone mode, the user id 1 will have implicit superuser
status, to allow repairs even if there are no users defined.
Print a warning message when starting in stand-alone mode when no
users are defined.
Disallow dropping the current user and session user.
Granting/revoking superuser status also grants/revokes usecatupd.
(Previously, it would never grant it back. This could lead to "deadlocks".)
CREATE USER and CREATE GROUP will start allocating user ids at 100
(unless explicitly specified), to prevent accidental creation of a
superuser (plus some room for future extensions).
> > ClientEncoding to SQL_ASCII (like default DatabaseEncoding). Bruce, can
> > you change it? It's one line change. Again thanks.
Forget it! A default client encoding must be set by actual database encoding...
Please apply the small attached patch that solve it better.
Karel Zak
We will no longer try to send elog messages to the client before we have
initialized backend libpq (oops); however, reporting bogus commandline
switches via elog does work now (not irrelevant, because of PGOPTIONS).
Fix problem with inappropriate sending of checkpoint-process messages
to stderr.
table creation time. Big deal you say - but this patch is the basis of the
next thing which is adding PRIMARY KEYs after table creation time. (Which
is currently impossible without twiddling catalogs)
Rundown
-------
* I have made the makeObjectName function of analyze.c non-static, and
exported it in analyze.h
* I have included analyze.h and defrem.h into command.c, to support
makingObjectNames and creating indices
* I removed the 'case CONSTR_PRIMARY' clause so that it properly fails and
says you can't add primary keys, rather than just doing nothing and
reporting nothing!!!
* I have modified the docs.
Algorithm
---------
* If name specified is null, search for a new valid constraint name. I'm
not sure if I should "lock" my generated name somehow tho - should I open
the relation before doing this step?
* Open relation in access exclusive mode
* Check that the constraint does not already exist
* Define the new index
* Warn if they're doubling up on an existing index
Christopher Kings-Lynne
occur unconditionally, even if the rule should otherwise execute
conditionally. This is more useful than giving an error, even though it's
not truly the correct behavior. Per today's pghackers discussion.
for them, and making them just wastes time during backend startup/shutdown.
Also, remove compile-time MAXBACKENDS limit per long-ago proposal.
You can now set MaxBackends as high as your kernel can stand without
any reconfiguration/recompilation.
-------------------------------------------------------------------
Subject: Re: [PATCHES] encoding names
From: Karel Zak <zakkr@zf.jcu.cz>
To: Peter Eisentraut <peter_e@gmx.net>
Cc: pgsql-patches <pgsql-patches@postgresql.org>
Date: Fri, 31 Aug 2001 17:24:38 +0200
On Thu, Aug 30, 2001 at 01:30:40AM +0200, Peter Eisentraut wrote:
> > - convert encoding 'name' to 'id'
>
> I thought we decided not to add functions returning "new" names until we
> know exactly what the new names should be, and pending schema
Ok, the patch not to add functions.
> better
>
> ...(): encoding name too long
Fixed.
I found new bug in command/variable.c in parse_client_encoding(), nobody
probably never see this error:
if (pg_set_client_encoding(encoding))
{
elog(ERROR, "Conversion between %s and %s is not supported",
value, GetDatabaseEncodingName());
}
because pg_set_client_encoding() returns -1 for error and 0 as true.
It's fixed too.
IMHO it can be apply.
Karel
PS:
* following files are renamed:
src/utils/mb/Unicode/KOI8_to_utf8.map -->
src/utils/mb/Unicode/koi8r_to_utf8.map
src/utils/mb/Unicode/WIN_to_utf8.map -->
src/utils/mb/Unicode/win1251_to_utf8.map
src/utils/mb/Unicode/utf8_to_KOI8.map -->
src/utils/mb/Unicode/utf8_to_koi8r.map
src/utils/mb/Unicode/utf8_to_WIN.map -->
src/utils/mb/Unicode/utf8_to_win1251.map
* new file:
src/utils/mb/encname.c
* removed file:
src/utils/mb/common.c
--
Karel Zak <zakkr@zf.jcu.cz>
http://home.zf.jcu.cz/~zakkr/
C, PostgreSQL, PHP, WWW, http://docs.linux.cz, http://mape.jcu.cz
> pam_strerror() should be used a few more times, rather than just saying
> "Error!". Also, the configure.in snippet seems wrong. You add
> -I$pam_prefix/include/security to $INCLUDES and then you #include
> <security/pam_appl.h>. This whole thing is probably unnecessary, since
> PAM is a system library on the systems where it exists, so the headers
> and libraries are found automatically, unlike OpenSSL and
> Kerberos.
See attached revised patch. (I'm sure the configure.in stuff can be done
right/better, I'm just not enough of a autoconf guru to know what to
change it to.)
Dominic J. Eidson
- new millisecond (ms) and microsecond (us) support
- more robus parsing from string - used is separator checking for
non-exact formats like to_date('2001-9-1', 'YYYY-MM-DD')
- SGML docs are included
Karel Zak
If there's anyone out there who's actually using datatype-defined
default values, this will be an incompatible change in behavior ...
but the old behavior was so broken that I doubt anyone was using it.
Standardize on %X/%X as the formatting for XLOG position display --- we
had a couple of different formats before, and none of 'em were as useful
as hex offsets IMHO.
available in freeSemMap. As noted by Tatsuo, this is now a likely
scenario for detecting MaxBackends-exceeded; if MaxBackends is a multiple
of PROC_NSEMS_PER_SET then we will fail here and not in sinval.c. The
cleanup path did not work correctly before, anyway.
system. Some systems did not understand the 'l' section, and in general
it wasn't entirely appropriate.
On SCO OpenServer, the man pages won't be installed at all until someone
figures out their man system.
buffer manager with 'pg_clog', a specialized access method modeled
on pg_xlog. This simplifies startup (don't need to play games to
open pg_log; among other things, OverrideTransactionSystem goes away),
should improve performance a little, and opens the door to recycling
commit log space by removing no-longer-needed segments of the commit
log. Actual recycling is not there yet, but I felt I should commit
this part separately since it'd still be useful if we chose not to
do transaction ID wraparound.
pgsql-hackers. pg_opclass now has a row for each opclass supported by each
index AM, not a row for each opclass name. This allows pg_opclass to show
directly whether an AM supports an opclass, and furthermore makes it possible
to store additional information about an opclass that might be AM-dependent.
pg_opclass and pg_amop now store "lossy" and "haskeytype" information that we
previously expected the user to remember to provide in CREATE INDEX commands.
Lossiness is no longer an index-level property, but is associated with the
use of a particular operator in a particular index opclass.
Along the way, IndexSupportInitialize now uses the syscaches to retrieve
pg_amop and pg_amproc entries. I find this reduces backend launch time by
about ten percent, at the cost of a couple more special cases in catcache.c's
IndexScanOK.
Initial work by Oleg Bartunov and Teodor Sigaev, further hacking by Tom Lane.
initdb forced.
has an alias SERIAL4 and a sister SERIAL8. SERIAL8 is just the same
except the created column is type int8 not int4.
initdb forced. Note this also breaks any chance of pg_upgrade from 7.1,
unless we hack up pg_upgrade to drop and recreate sequences. (Which is
not out of the question, but I don't wanna do it.)
Allow pg_shadow to be MD5 encrypted.
Add ENCRYPTED/UNENCRYPTED option to CREATE/ALTER user.
Add password_encryption postgresql.conf option.
Update wire protocol version to 2.1.
for speed reasons; its result type also changes to int8. avg() on these
datatypes now accumulates the running sum in int8 for speed; but we still
deliver the final result as numeric, so that fractional accuracy is
preserved.
count() now counts and returns in int8, not int4. I am a little nervous
about this possibly breaking users' code, but there didn't seem to be
a strong sentiment for avoiding the problem. If we get complaints during
beta, we can change count back to int4 and add a "count8" aggregate.
For that matter, users can do it for themselves with a simple CREATE
AGGREGATE command; the int4inc function is still present, so no C hacking
is needed.
Also added max() and min() aggregates for OID that do proper unsigned
comparison, instead of piggybacking on int4 aggregates.
initdb forced.
a tad sloppy about generating the targetlist for some nodes, by generating
a tlist entry that claimed to be a constant when the value wasn't actually
constant. This caused setrefs.c to do the wrong thing later on.
syntax for language names (instead of 'string').
createlang now handles the case where a second language uses the same call
handler as an already installed language (e.g., plperl/plperlu).
droplang now handles the reverse case, i.e., dropping a language where
the call handler is still used by another language. Moreover, droplang
can now be used to drop any user-defined language, not just the supplied
ones.
default, but OIDS are removed from many system catalogs that don't need them.
Some interesting side effects: TOAST pointers are 20 bytes not 32 now;
pg_description has a three-column key instead of one.
Bugs fixed in passing: BINARY cursors work again; pg_class.relhaspkey
has some usefulness; pg_dump dumps comments on indexes, rules, and
triggers in a valid order.
initdb forced.
(as proposed in http://fts.postgresql.org/db/mw/msg.html?mid=1028327)
2. support for 'pass-by-value' arguments - to test this
we used special opclass for int4 with values in range [0-2^15]
More testing will be done after resolving problem with
index_formtuple and implementation of B-tree using GiST
3. small patch to contrib modules (seg,cube,rtree_gist,intarray) -
mark functions as 'isstrict' where needed.
Oleg Bartunov
Peter Eisentraut
Tom Lane
Bruce Momjian
Tatsuo Ishii
Hiroshi Inoue
Jan Wieck