When VACUUM set relfrozenxid before now, it set it to whatever value was
used to determine which tuples to freeze -- the FreezeLimit cutoff.
This approach was very naive. The relfrozenxid invariant only requires
that new relfrozenxid values be <= the oldest extant XID remaining in
the table (at the point that the VACUUM operation ends), which in
general might be much more recent than FreezeLimit.
VACUUM now carefully tracks the oldest remaining XID/MultiXactId as it
goes (the oldest remaining values _after_ lazy_scan_prune processing).
The final values are set as the table's new relfrozenxid and new
relminmxid in pg_class at the end of each VACUUM. The oldest XID might
come from a tuple's xmin, xmax, or xvac fields. It might even come from
one of the table's remaining MultiXacts.
Final relfrozenxid values must still be >= FreezeLimit in an aggressive
VACUUM (FreezeLimit still acts as a lower bound on the final value that
aggressive VACUUM can set relfrozenxid to). Since standard VACUUMs
still make no guarantees about advancing relfrozenxid, they might as
well set relfrozenxid to a value from well before FreezeLimit when the
opportunity presents itself. In general standard VACUUMs may now set
relfrozenxid to any value > the original relfrozenxid and <= OldestXmin.
Credit for the general idea of using the oldest extant XID to set
pg_class.relfrozenxid at the end of VACUUM goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkymFbz6D_vL+jmqSn_5q1wsFvFrE+37yLgL_Rkfd6Gzg@mail.gmail.com
This makes the code more consistent with SpGiST, GiST and GIN, that
already use this style, and the idea is to make easier the introduction
of more sanity checks for each of these AM-specific macros. BRIN uses a
different set of macros to get a page's type and flags, so it has no
need for something similar.
Author: Matthias van de Meent
Discussion: https://postgr.es/m/CAEze2WjE3+tGO9Fs9+iZMU+z6mMZKo54W1Zt98WKqbEUHbHOBg@mail.gmail.com
Crash recovery on standby may encounter missing directories when
replaying create database WAL records. Prior to this patch, the standby
would fail to recover in such a case. However, the directories could be
legitimately missing. Consider a sequence of WAL records as follows:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the tablespace
directory, the standby crashes and has to replay the create database
record again, the crash recovery must be able to move on.
This patch adds a mechanism similar to invalid-page tracking, to keep a
tally of missing directories during crash recovery. If all the missing
directory references are matched with corresponding drop records at the
end of crash recovery, the standby can safely continue following the
primary.
Backpatch to 13, at least for now. The bug is older, but fixing it in
older branches requires more careful study of the interactions with
commit e6d8069522, which appeared in 13.
A new TAP test file is added to verify the condition. However, because
it depends on commit d6d317dbf6, it can only be added to branch
master. I (Álvaro) manually verified that the code behaves as expected
in branch 14. It's a bit nervous-making to leave the code uncovered by
tests in older branches, but leaving the bug unfixed is even worse.
Also, the main reason this fix took so long is precisely that we
couldn't agree on a good strategy to approach testing for the bug, so
perhaps this is the best we can do.
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Author: Paul Guo <paulguo@gmail.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
They were macros previously, but recent callsite additions made Coverity
complain about one of the assertions being always true. This change
could have been made a long time ago, but the Coverity complain broke
the inertia.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/202203241021.uts52sczx3al@alvherre.pgsql
Teach xlogreader.c to decode the WAL into a circular buffer. This will
support optimizations based on looking ahead, to follow in a later
commit.
* XLogReadRecord() works as before, decoding records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros and certain traditional members like xlogreader->ReadRecPtr.
* An alternative new interface XLogReadAhead()/XLogNextRecord() is
added that returns pointers to DecodedXLogRecord objects so that it's
now possible to look ahead in the WAL stream while replaying.
* In order to be able to use the new interface effectively while
streaming data, support is added for the page_read() callback to
respond to a new nonblocking mode with XLREAD_WOULDBLOCK instead of
waiting for more data to arrive.
No direct user of the new interface is included in this commit, though
XLogReadRecord() uses it internally. Existing code doesn't need to
change, except in a few places where it was accessing reader internals
directly and now needs to go through accessor macros.
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
wal_compression gains a new value, "zstd", to allow the compression of
full-page images using the compression method of the same name.
Compression is done using the default level recommended by the library,
as of ZSTD_CLEVEL_DEFAULT = 3. Some benchmarking has shown that it
could make sense to use a level lower for the FPI compression, like 1 or
2, as the compression rate did not change much with a bit less CPU
consumed, but any tests done would only cover few scenarios so it is
hard to come to a clear conclusion. Anyway, there is no reason to not
use the default level instead, which is the level recommended by the
library so it should be fine for most cases.
zstd outclasses easily pglz, and is better than LZ4 where one wants to
have more compression at the cost of extra CPU but both are good enough
in their own scenarios, so the choice between one or the other of these
comes to a study of the workload patterns and the schema involved,
mainly.
This commit relies heavily on 4035cd5, that reshaped the code creating
and restoring full-page writes to be aware of the compression type,
making this integration straight-forward.
This patch borrows some early work from Andrey Borodin, though the patch
got a complete rewrite.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20220222231948.GJ9008@telsasoft.com
This is pretty queasy-making on general principles, and the more so
once you notice that CommitTransactionCommand() is actually stomping
on the values saved by _SPI_commit(). It's okay as long as the
active values didn't change during HoldPinnedPortals(); but that's
a larger assumption than I think we want to make, especially since
the fix is so simple.
Discussion: https://postgr.es/m/1533956.1645731245@sss.pgh.pa.us
The buffer argument hasn't been used since the function was first added
by commit bbb6e559c4. The sibling heap_prepare_freeze_tuple function
doesn't have such an argument either. Remove it.
This moves the functions related to performing WAL recovery into the new
xlogrecovery.c source file, leaving xlog.c responsible for maintaining
the WAL buffers, coordinating the startup and switch from recovery to
normal operations, and other miscellaneous stuff that have always been in
xlog.c.
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Robert Haas
Discussion: https://www.postgresql.org/message-id/a31f27b4-a31d-f976-6217-2b03be646ffa%40iki.fi
This extends the logical decoding to also decode sequence increments.
We differentiate between sequences created in the current (in-progress)
transaction, and sequences created earlier. This mixed behavior is
necessary because while sequences are not transactional (increments are
not subject to ROLLBACK), relfilenode changes are. So we do this:
* Changes for sequences created in the same top-level transaction are
treated as transactional, i.e. just like any other change from that
transaction, and discarded in case of a rollback.
* Changes for sequences created earlier are applied immediately, as if
performed outside any transaction. This applies also after ALTER
SEQUENCE, which may create a new relfilenode.
Moreover, if we ever get support for DDL replication, the sequence
won't exist until the transaction gets applied.
Sequences created in the current transaction are tracked in a simple
hash table, identified by a relfilenode. That means a sequence may
already exist, but if a transaction does ALTER SEQUENCE then the
increments for the new relfilenode will be treated as transactional.
For each relfilenode we track the XID of (sub)transaction that created
it, which is needed for cleanup at transaction end. We don't need to
check the XID to decide if an increment is transactional - if we find a
match in the hash table, it has to be the same transaction.
This requires two minor changes to WAL-logging. Firstly, we need to
ensure the sequence record has a valid XID - until now the the increment
might have XID 0 if it was the first change in a subxact. But the
sequence might have been created in the same top-level transaction. So
we ensure the XID is assigned when WAL-logging increments.
The other change is addition of "created" flag, marking increments for
newly created relfilenodes. This makes it easier to maintain the hash
table of sequences that need transactional handling.
Note: This is needed because of subxacts. A XID 0 might still have the
sequence created in a different subxact of the same top-level xact.
This does not include any changes to test_decoding and/or the built-in
replication - those will be committed in separate patches.
A patch adding decoding of sequences was originally submitted by Cary
Huang. This commit reworks various important aspects (e.g. the WAL
logging and transactional/non-transactional handling). However, the
original patch and reviews were very useful.
Author: Tomas Vondra, Cary Huang
Reviewed-by: Peter Eisentraut, Hannu Krosing, Andres Freund
Discussion: https://postgr.es/m/d045f3c2-6cfb-06d3-5540-e63c320df8bc@enterprisedb.com
Discussion: https://postgr.es/m/1710ed7e13b.cd7177461430746.3372264562543607781@highgo.ca
Running a shell command for each file to be archived has a lot of
overhead and may not offer as much error checking as you want, or the
exact semantics that you want. So, offer the option to call a loadable
module for each file to be archived, rather than running a shell command.
Also, add a 'basic_archive' contrib module as an example implementation
that archives to a local directory.
Nathan Bossart, with a little bit of kibitzing by me.
Discussion: http://postgr.es/m/20220202224433.GA1036711@nathanxps13
xlog.h is directly and indirectly #included in a lot of places. With
this change, xloginsert.h is no longer unnecessarily included in the
large number of them that don't need it.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CALj2ACVe-W+WM5P44N7eG9C2_FmaeM8Dq5aCnD3fHt0Ba=WR6w@mail.gmail.com
Commit 9a974cbcba arranged to preserve
relfilenodes and tablespace OIDs. For similar reasons, also arrange
to preserve database OIDs.
One problem is that, up until now, the OIDs assigned to the template0
and postgres databases have not been fixed. This could be a problem
when upgrading, because pg_upgrade might try to migrate a database
from the old cluster to the new cluster while keeping the OID and find
a different database with that OID, resulting in a failure. If it finds
a database with the same name and the same OID that's OK: it will be
dropped and recreated. But the same OID and a different name is a
problem.
To prevent that, fix the OIDs for postgres and template0 to specific
values less than 16384. To avoid running afoul of this rule, these
values should not be changed in future releases. It's not a problem
that these OIDs aren't fixed in existing releases, because the OIDs
that we're assigning here weren't used for either of these databases
in any previous release. Thus, there's no chance that an upgrade of
a cluster from any previous release will collide with the OIDs we're
assigning here. And going forward, the OIDs will always be fixed, so
the only potential collision is with a system database having the
same name and the same OID, which is OK.
This patch lets users assign a specific OID to a database as well,
provided however that it can't be less than 16384. I (rhaas) thought
it might be better not to expose this capability to users, but the
consensus was otherwise, so the syntax is documented. Letting users
assign OIDs below 16384 would not be OK, though, because a
user-created database with a low-numbered OID might collide with a
system-created database in a future release. We therefore prohibit
that.
Shruthi KC, based on an earlier patch from Antonin Houska, reviewed
and with some adjustments by me.
Discussion: http://postgr.es/m/CA+TgmoYgTwYcUmB=e8+hRHOFA0kkS6Kde85+UNdon6q7bt1niQ@mail.gmail.com
Discussion: http://postgr.es/m/CAASxf_Mnwm1Dh2vd5FAhVX6S1nwNSZUB1z12VddYtM++H2+p7w@mail.gmail.com
This commit moves parallel vacuum related code to a new file
commands/vacuumparallel.c so that any table AM supporting indexes can
utilize parallel vacuum in order to call index AM callbacks (ambulkdelete
and amvacuumcleanup) with parallel workers.
Another reason for this refactoring is that the parallel vacuum isn't
specific to heap so it doesn't make sense to keep this code in
heap/vacuumlazy.c.
Author: Masahiko Sawada, based on suggestion from Andres Freund
Reviewed-by: Hou Zhijie, Amit Kapila, Haiying Tang
Discussion: https://www.postgresql.org/message-id/20211030212101.ae3qcouatwmy7tbr%40alap3.anarazel.de
It's not great that RecoveryInProgress() calls InitXLOGAccess(),
because a status inquiry function typically shouldn't have the side
effect of performing initializations. We could fix that by calling
InitXLOGAccess() from some other place, but instead, let's remove it
altogether.
One thing InitXLogAccess() did is initialize wal_segment_size, but it
doesn't need to do that. In the postmaster, PostmasterMain() calls
LocalProcessControlFile(), and all child processes will inherit that
value -- except in EXEC_BACKEND bulds, but then each backend runs
SubPostmasterMain() which also calls LocalProcessControlFile().
The other thing InitXLOGAccess() did is update RedoRecPtr and
doPageWrites, but that's not critical, because all code that uses
them will just retry if it turns out that they've changed. The
only difference is that most code will now see an initial value that
is definitely invalid instead of one that might have just been way
out of date, but that will only happen once per backend lifetime,
so it shouldn't be a big deal.
Patch by me, reviewed by Nathan Bossart, Michael Paquier, Andres
Freund, Heikki Linnakangas, and Álvaro Herrera.
Discussion: http://postgr.es/m/CA+TgmoY7b65qRjzHN_tWUk8B4sJqk1vj1d31uepVzmgPnZKeLg@mail.gmail.com
The term "super-exclusive lock" is a synonym for "buffer cleanup lock"
that first appeared in nbtree many years ago. Standardize things by
consistently using the term cleanup lock. This finishes work started by
commit 276db875.
There is no good reason to have two terms. But there is a good reason
to only have one: to avoid confusion around why VACUUM acquires a full
cleanup lock (not just an ordinary exclusive lock) in index AMs, during
ambulkdelete calls. This has nothing to do with protecting the physical
index data structure itself. It is needed to implement a locking
protocol that ensures that TIDs pointing to the heap/table structure
cannot get marked for recycling by VACUUM before it is safe (which is
somewhat similar to how VACUUM uses cleanup locks during its first heap
pass). Note that it isn't strictly necessary for index AMs to implement
this locking protocol -- several index AMs use an MVCC snapshot as their
sole interlock to prevent unsafe TID recycling.
In passing, update the nbtree README. Cleanly separate discussion of
the aforementioned index vacuuming locking protocol from discussion of
the "drop leaf page pin" optimization added by commit 2ed5b87f. We now
structure discussion of the latter by describing how individual index
scans may safely opt out of applying the standard locking protocol (and
so can avoid blocking progress by VACUUM). Also document why the
optimization is not safe to apply during nbtree index-only scans.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzngHgQa92tz6NQihf4nxJwRzCV36yMJO_i8dS+2mgEVKw@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-WzkHPgsBBvGWjz=8PjNhDefy7XRkDKiT5NxMs-n5ZCf2dA@mail.gmail.com
When determining whether an index update may be skipped by using HOT, we
can ignore attributes indexed only by BRIN indexes. There are no index
pointers to individual tuples in BRIN, and the page range summary will
be updated anyway as it relies on visibility info.
This also removes rd_indexattr list, and replaces it with rd_attrsvalid
flag. The list was not used anywhere, and a simple flag is sufficient.
Patch by Josef Simanek, various fixes and improvements by me.
Author: Josef Simanek
Reviewed-by: Tomas Vondra, Alvaro Herrera
Discussion: https://postgr.es/m/CAFp7QwpMRGcDAQumN7onN9HjrJ3u4X3ZRXdGFT0K5G2JWvnbWg%40mail.gmail.com
Add a comment explaining why the pgstats accounting used during
opportunistic heap pruning operations (to maintain the current number of
dead tuples in the relation) needs to compensate by subtracting away the
number of new LP_DEAD items. This is needed so it can avoid completely
forgetting about tuples that become LP_DEAD items during pruning -- they
should still count.
It seems more natural to discuss this issue at the only relevant call
site (opportunistic pruning), since the same issue does not apply to the
only other caller (the VACUUM call site). Move everything there too.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-Wzm7f+A6ej650gi_ifTgbhsadVW5cujAL3punpupHff5Yg@mail.gmail.com
StartupXLOG() still has ThisTimeLineID as a local variable, but the
remaining code in xlog.c now needs to the relevant TimeLineID by some
other means. Mostly, this means that we now pass it as a function
parameter to a bunch of functions where we didn't previously.
However, a few cases require special handling:
- In functions that might be called by outside callers who
wouldn't necessarily know what timeline to specify, we get
the timeline ID from shared memory. XLogCtl->ThisTimeLineID
can be used in most cases since recovery is known to have
completed by the time those functions are called. In
xlog_redo(), we can use XLogCtl->replayEndTLI.
- XLogFileClose() needs to know the TLI of the open logfile.
Do that with a new global variable openLogTLI. While
someone could argue that this is just trading one global
variable for another, the new one has a far more narrow
purposes and is referenced in just a few places.
- read_backup_label() now returns the TLI that it obtains
by parsing the backup_label file. Previously, ReadRecord()
could be called to parse the checkpoint record without
ThisTimeLineID having been initialized. Now, the timeline
is passed down, and I didn't want to pass an uninitialized
variable; this change lets us avoid that. The old coding
didn't seem to have any practical consequences that we need
to worry about, but this is cleaner.
- In BootstrapXLOG(), it's just a constant.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com
All such code deals with this global variable in one of three ways.
Sometimes the same functions use it in more than one of these ways
at the same time.
First, sometimes it's an implicit argument to one or more functions
being called in xlog.c or elsewhere, and must be set to the
appropriate value before calling those functions lest they
misbehave. In those cases, it is now passed as an explicit argument
instead.
Second, sometimes it's used to obtain the current timeline after
the end of recovery, i.e. the timeline to which WAL is being
written and flushed. Such code now calls GetWALInsertionTimeLine()
or relies on the new out parameter added to GetFlushRecPtr().
Third, sometimes it's used during recovery to store the current
replay timeline. That can change, so such code must generally
update the value before each use. It can still do that, but must
now use a local variable instead.
The net effect of these changes is to reduce by a fair amount the
amount of code that is directly accessing this global variable.
That's good, because history has shown that we don't always think
clearly about which timeline ID it's supposed to contain at any
given point in time, or indeed, whether it has been or needs to
be initialized at any given point in the code.
Patch by me, reviewed and tested by Michael Paquier, Amul Sul, and
Álvaro Herrera.
Discussion: https://postgr.es/m/CA+TgmobfAAqhfWa1kaFBBFvX+5CjM=7TE=n4r4Q1o2bjbGYBpA@mail.gmail.com
Add hardening to the heapam index tuple deletion path to catch TIDs in
index pages that point to a heap item that index tuples should never
point to. The corruption we're trying to catch here is particularly
tricky to detect, since it typically involves "extra" (corrupt) index
tuples, as opposed to the absence of required index tuples in the index.
For example, a heap TID from an index page that turns out to point to an
LP_UNUSED item in the heap page has a good chance of being caught by one
of the new checks. There is a decent chance that the recently fixed
parallel VACUUM bug (see commit 9bacec15) would have been caught had
that particular check been in place for Postgres 14. No backpatch of
this extra hardening for now, though.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wzk-4_raTzawWGaiqNvkpwDXxv3y1AQhQyUeHfkU=tFCeA@mail.gmail.com
Commit 0bead9af48 introduced XLOG_INCLUDE_XID flag to indicate that the
WAL record contains subXID-to-topXID association. It uses that flag later
to mark in CurrentTransactionState that top-xid is logged so that we
should not try to log it again with the next WAL record in the current
subtransaction. However, we can use a localized variable to pass that
information.
In passing, change the related function and variable names to make them
consistent with what the code is actually doing.
Author: Dilip Kumar
Reviewed-by: Alvaro Herrera, Amit Kapila
Discussion: https://postgr.es/m/E1mSoYz-0007Fh-D9@gemulon.postgresql.org
The purpose of commit 8a54e12a38 was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
Physical replication always ships WAL segment files to replicas once
they are complete. This is a problem if one WAL record is split across
a segment boundary and the primary server crashes before writing down
the segment with the next portion of the WAL record: WAL writing after
crash recovery would happily resume at the point where the broken record
started, overwriting that record ... but any standby or backup may have
already received a copy of that segment, and they are not rewinding.
This causes standbys to stop following the primary after the latter
crashes:
LOG: invalid contrecord length 7262 at A8/D9FFFBC8
because the standby is still trying to read the continuation record
(contrecord) for the original long WAL record, but it is not there and
it will never be. A workaround is to stop the replica, delete the WAL
file, and restart it -- at which point a fresh copy is brought over from
the primary. But that's pretty labor intensive, and I bet many users
would just give up and re-clone the standby instead.
A fix for this problem was already attempted in commit 515e3d84a0, but
it only addressed the case for the scenario of WAL archiving, so
streaming replication would still be a problem (as well as other things
such as taking a filesystem-level backup while the server is down after
having crashed), and it had performance scalability problems too; so it
had to be reverted.
This commit fixes the problem using an approach suggested by Andres
Freund, whereby the initial portion(s) of the split-up WAL record are
kept, and a special type of WAL record is written where the contrecord
was lost, so that WAL replay in the replica knows to skip the broken
parts. With this approach, we can continue to stream/archive segment
files as soon as they are complete, and replay of the broken records
will proceed across the crash point without a hitch.
Because a new type of WAL record is added, users should be careful to
upgrade standbys first, primaries later. Otherwise they risk the standby
being unable to start if the primary happens to write such a record.
A new TAP test that exercises this is added, but the portability of it
is yet to be seen.
This has been wrong since the introduction of physical replication, so
backpatch all the way back. In stable branches, keep the new
XLogReaderState members at the end of the struct, to avoid an ABI
break.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Nathan Bossart <bossartn@amazon.com>
Discussion: https://postgr.es/m/202108232252.dh7uxf6oxwcy@alvherre.pgsql
That allows to include just visibilitymapdefs.h from file.c, and in turn,
remove include of postgres.h from relcache.h.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210913232614.czafiubr435l6egi%40alap3.anarazel.de
Author: Alexander Korotkov
Reviewed-by: Andres Freund, Tom Lane, Alvaro Herrera
Backpatch-through: 13
It is not appropriate for deduplication to apply single value strategy
when triggered by a bottom-up index deletion pass. This wastes cycles
because later bottom-up deletion passes will overinterpret older
duplicate tuples that deduplication actually just skipped over "by
design". It also makes bottom-up deletion much less effective for low
cardinality indexes that happen to cross a meaningless "index has single
key value per leaf page" threshold.
To fix, slightly narrow the conditions under which deduplication's
single value strategy is considered. We already avoided the strategy
for a unique index, since our high level goal must just be to buy time
for VACUUM to run (not to buy space). We'll now also avoid it when we
just had a bottom-up pass that reported failure. The two cases share
the same high level goal, and already overlapped significantly, so this
approach is quite natural.
Oversight in commit d168b666, which added bottom-up index deletion.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznaOvM+Gyj-JQ0X=JxoMDxctDTYjiEuETdAGbF5EUc3MA@mail.gmail.com
Backpatch: 14-, where bottom-up deletion was introduced.
I noticed that commit 0bead9af48 left this flag undocumented in
XLogSetRecordFlags, which led me to discover that the flag doesn't
actually do what the one comment on it said it does. Improve the
situation by adding some more comments.
Backpatch to 14, where the aforementioned commit appears.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202109212119.c3nhfp64t2ql@alvherre.pgsql
WAL records may span multiple segments, but XLogWrite() does not
wait for the entire record to be written out to disk before
creating archive status files. Instead, as soon as the last WAL page of
the segment is written, the archive status file is created, and the
archiver may process it. If PostgreSQL crashes before it is able to
write and flush the rest of the record (in the next WAL segment), the
wrong version of the first segment file lingers in the archive, which
causes operations such as point-in-time restores to fail.
To fix this, keep track of records that span across segments and ensure
that segments are only marked ready-for-archival once such records have
been completely written to disk.
This has always been wrong, so backpatch all the way back.
Author: Nathan Bossart <bossartn@amazon.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CBDDFA01-6E40-46BB-9F98-9340F4379505@amazon.com
It appears that check_track_commit_timestamp was declared but has never
been defined in our code base. Likely this is just leftover cruft from
a development version of the original patch to add commit timestamps.
Let's just remove the useless declaration. The inclusion of guc.h also
seems surplus to requirements.
Author: Andrey Lepikhov
Discussion: https://postgr.es/m/f49aefb5-edbb-633a-af07-3e777023a94d@postgrespro.ru
They are used in code that runs both during normal operation and during
WAL replay, and needs to behave differently during replay. Move them to
xlogutils.c, because that's where we have other helper functions used by
redo routines.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/b3b71061-4919-e882-4857-27e370ab134a%40iki.fi
Macs don't understand O_DIRECT, but they can disable caching with a
separate fcntl() call. Extend the file opening functions in fd.c to
handle this for us if the caller passes in PG_O_DIRECT.
For now, this affects only WAL data and even then only if you set:
max_wal_senders=0
wal_level=minimal
This is not expected to be very useful on its own, but later proposed
patches will make greater use of direct I/O, and it'll be useful for
testing if developers on Macs can see the effects.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKG%2BADiyyHe0cun2wfT%2BSVnFVqNYPxoO6J9zcZkVO7%2BNGig%40mail.gmail.com
As of v14, pg_depend contains almost 7000 "pin" entries recording
the OIDs of built-in objects. This is a fair amount of bloat for
every database, and it adds time to pg_depend lookups as well as
initdb. We can get rid of all of those entries in favor of an OID
range check, i.e. "OIDs below FirstUnpinnedObjectId are pinned".
(template1 and the public schema are exceptions. Those exceptions
are now wired into IsPinnedObject() instead of initdb's code for
filling pg_depend, but it's the same amount of cruft either way.)
The contents of pg_shdepend are modified likewise.
Discussion: https://postgr.es/m/3737988.1618451008@sss.pgh.pa.us
To add support for streaming transactions at prepare time into the
built-in logical replication, we need to do the following things:
* Modify the output plugin (pgoutput) to implement the new two-phase API
callbacks, by leveraging the extended replication protocol.
* Modify the replication apply worker, to properly handle two-phase
transactions by replaying them on prepare.
* Add a new SUBSCRIPTION option "two_phase" to allow users to enable
two-phase transactions. We enable the two_phase once the initial data sync
is over.
We however must explicitly disable replication of two-phase transactions
during replication slot creation, even if the plugin supports it. We
don't need to replicate the changes accumulated during this phase,
and moreover, we don't have a replication connection open so we don't know
where to send the data anyway.
The streaming option is not allowed with this new two_phase option. This
can be done as a separate patch.
We don't allow to toggle two_phase option of a subscription because it can
lead to an inconsistent replica. For the same reason, we don't allow to
refresh the publication once the two_phase is enabled for a subscription
unless copy_data option is false.
Author: Peter Smith, Ajin Cherian and Amit Kapila based on previous work by Nikhil Sontakke and Stas Kelvich
Reviewed-by: Amit Kapila, Sawada Masahiko, Vignesh C, Dilip Kumar, Takamichi Osumi, Greg Nancarrow
Tested-By: Haiying Tang
Discussion: https://postgr.es/m/02DA5F5E-CECE-4D9C-8B4B-418077E2C010@postgrespro.ru
Discussion: https://postgr.es/m/CAA4eK1+opiV4aFTmWWUF9h_32=HfPOW9vZASHarT0UA5oBrtGw@mail.gmail.com
The logic is implemented so as there can be a choice in the compression
used when building a WAL record, and an extra per-record bit is used to
track down if a block is compressed with PGLZ, LZ4 or nothing.
wal_compression, the existing parameter, is changed to an enum with
support for the following backward-compatible values:
- "off", the default, to not use compression.
- "pglz" or "on", to compress FPWs with PGLZ.
- "lz4", the new mode, to compress FPWs with LZ4.
Benchmarking has showed that LZ4 outclasses easily PGLZ. ZSTD would be
also an interesting choice, but going just with LZ4 for now makes the
patch minimalistic as toast compression is already able to use LZ4, so
there is no need to worry about any build-related needs for this
implementation.
Author: Andrey Borodin, Justin Pryzby
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/3037310D-ECB7-4BF1-AF20-01C10BB33A33@yandex-team.ru
Before a restartpoint finishes PreallocXlogFiles(), a startup process
KeepFileRestoredFromArchive() call can unlink the preallocated segment.
If a CHECKPOINT sql command had elicited the restartpoint experiencing
the race condition, that sql command failed. Moreover, the restartpoint
omitted its log_checkpoints message and some inessential resource
reclamation. Prevent the ERROR by skipping open() of the segment.
Since these consequences are so minor, no back-patch.
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Only initdb used it. initdb refuses to operate on a non-empty directory
and generally does not cope with pre-existing files of other kinds.
Hence, use the opportunity to simplify.
Discussion: https://postgr.es/m/20210202151416.GB3304930@rfd.leadboat.com
Commit ab596105b increased FirstBootstrapObjectId from 12000 to 13000,
but we've had some push-back about that. It's worrisome to reduce the
daylight between there and FirstNormalObjectId, because the number of
OIDs consumed during initdb for collation objects is hard to predict.
We can improve the situation by abandoning the assumption that these
OIDs must be globally unique. It should be sufficient for them to be
unique per-catalog. (Any code that's unhappy about that is broken
anyway, since no more than per-catalog uniqueness can be guaranteed
once the OID counter wraps around.) With that change, the largest OID
assigned during genbki.pl (starting from a base of 10000) is a bit
under 11000. This allows reverting FirstBootstrapObjectId to 12000
with reasonable confidence that that will be sufficient for many years
to come.
We are not, at this time, abandoning the expectation that
hand-assigned OIDs (below 10000) are globally unique. Someday that'll
likely be necessary, but the need seems years away still.
This is late for v14, but it seems worth doing it now so that
downstream software doesn't have to deal with the consequences of
a change in FirstBootstrapObjectId. In any case, we already
bought into forcing an initdb for beta2, so another catversion
bump won't hurt.
Discussion: https://postgr.es/m/1665197.1622065382@sss.pgh.pa.us
Redefine '\0' (InvalidCompressionMethod) as meaning "if we need to
compress, use the current setting of default_toast_compression".
This allows '\0' to be a suitable default choice regardless of
datatype, greatly simplifying code paths that initialize tupledescs
and the like. It seems like a more user-friendly approach as well,
because now the default compression choice doesn't migrate into table
definitions, meaning that changing default_toast_compression is
usually sufficient to flip an installation's behavior; one needn't
tediously issue per-column ALTER SET COMPRESSION commands.
Along the way, fix a few minor bugs and documentation issues
with the per-column-compression feature. Adopt more robust
APIs for SetIndexStorageProperties and GetAttributeCompression.
Bump catversion because typical contents of attcompression will now
be different. We could get away without doing that, but it seems
better to ensure v14 installations all agree on this. (We already
forced initdb for beta2, anyway.)
Discussion: https://postgr.es/m/626613.1621787110@sss.pgh.pa.us
Now that attcompression is just a char, there's a lot of wasted
padding space after it. Move it into the group of char-wide
columns to save a net of 4 bytes per pg_attribute entry. While
we're at it, swap the order of attstorage and attalign to make for
a more logical grouping of these columns.
Also re-order actions in related code to match the new field ordering.
This patch also fixes one outright bug: equalTupleDescs() failed to
compare attcompression. That could, for example, cause relcache
reload to fail to adopt a new value following a change.
Michael Paquier and Tom Lane, per a gripe from Andres Freund.
Discussion: https://postgr.es/m/20210517204803.iyk5wwvwgtjcmc5w@alap3.anarazel.de
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
This set of commits has some bugs with known fixes, but at this late
stage in the release cycle it seems best to revert and resubmit next
time, along with some new automated test coverage for this whole area.
Commits reverted:
dc88460c: Doc: Review for "Optionally prefetch referenced data in recovery."
1d257577: Optionally prefetch referenced data in recovery.
f003d9f8: Add circular WAL decoding buffer.
323cbe7c: Remove read_page callback from XLogReader.
Remove the new GUC group WAL_RECOVERY recently added by a55a9847, as the
corresponding section of config.sgml is now reverted.
Discussion: https://postgr.es/m/CAOuzzgrn7iKnFRsB4MHp3UisEQAGgZMbk_ViTN4HV4-Ksq8zCg%40mail.gmail.com
Commit f003d9f87 left this macro with inadequate (or, one could say,
too much) parenthesization. Which was catastrophic to the correctness
of calls such as "if (!XLogRecHasBlockRef(record, 1)) ...". There
are only a few of those, which perhaps explains why we didn't notice
immediately (with our general weakness of WAL replay testing being
another factor). I found it by debugging intermittent replay failures
like
2021-04-08 14:33:30.191 EDT [29463] PANIC: failed to locate backup block with ID 1
2021-04-08 14:33:30.191 EDT [29463] CONTEXT: WAL redo at 0/95D3438 for SPGist/ADD_NODE: off 1; blkref #0: rel 1663/16384/25998, blk 1
Commit 438fc4a39c prevented the WAL replay from writing
COMMIT_TS_SETTS record. By this change there is no code that
generates COMMIT_TS_SETTS record in PostgreSQL core.
Also we can think that there are no extensions using the record
because we've not received so far any complaints about the issue
that commit 438fc4a39c fixed. Therefore this commit removes
COMMIT_TS_SETTS record and its related code. Even without
this record, the timestamp required for commit timestamp feature
can be acquired from the COMMIT record.
Bump WAL page magic.
Reported-by: lx zou <zoulx1982@163.com>
Author: Fujii Masao
Reviewed-by: Alvaro Herrera
Discussion: https://postgr.es/m/16931-620d0f2fdc6108f1@postgresql.org
Introduce a new GUC recovery_prefetch, disabled by default. When
enabled, look ahead in the WAL and try to initiate asynchronous reading
of referenced data blocks that are not yet cached in our buffer pool.
For now, this is done with posix_fadvise(), which has several caveats.
Better mechanisms will follow in later work on the I/O subsystem.
The GUC maintenance_io_concurrency is used to limit the number of
concurrent I/Os we allow ourselves to initiate, based on pessimistic
heuristics used to infer that I/Os have begun and completed.
The GUC wal_decode_buffer_size is used to limit the maximum distance we
are prepared to read ahead in the WAL to find uncached blocks.
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com> (parts)
Reviewed-by: Andres Freund <andres@anarazel.de> (parts)
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com> (parts)
Tested-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Tested-by: Sait Talha Nisanci <Sait.Nisanci@microsoft.com>
Discussion: https://postgr.es/m/CA%2BhUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq%3DAovOddfHpA%40mail.gmail.com
Teach xlogreader.c to decode its output into a circular buffer, to
support optimizations based on looking ahead.
* XLogReadRecord() works as before, consuming records one by one, and
allowing them to be examined via the traditional XLogRecGetXXX()
macros.
* An alternative new interface XLogNextRecord() is added that returns
pointers to DecodedXLogRecord structs that can be examined directly.
* XLogReadAhead() provides a second cursor that lets you see
further ahead, as long as data is available and there is enough space
in the decoding buffer. This returns DecodedXLogRecord pointers to the
caller, but also adds them to a queue of records that will later be
consumed by XLogNextRecord()/XLogReadRecord().
The buffer's size is controlled with wal_decode_buffer_size. The buffer
could potentially be placed into shared memory, for future projects.
Large records that don't fit in the circular buffer are called
"oversized" and allocated separately with palloc().
Discussion: https://postgr.es/m/CA+hUKGJ4VJN8ttxScUFM8dOKX0BrBiboo5uz1cq=AovOddfHpA@mail.gmail.com
Previously, the XLogReader module would fetch new input data using a
callback function. Redesign the interface so that it tells the caller
to insert more data with a special return value instead. This API suits
later patches for prefetching, encryption and maybe other future
projects that would otherwise require continually extending the callback
interface.
As incidental cleanup work, move global variables readOff, readLen and
readSegNo inside XlogReaderState.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Author: Heikki Linnakangas <hlinnaka@iki.fi> (parts of earlier version)
Reviewed-by: Antonin Houska <ah@cybertec.at>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Takashi Menjo <takashi.menjo@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20190418.210257.43726183.horiguchi.kyotaro%40lab.ntt.co.jp
Retry the call to heap_prune_page() in rare cases where there is
disagreement between the heap_prune_page() call and the call to
HeapTupleSatisfiesVacuum() that immediately follows. Disagreement is
possible when a concurrently-aborted transaction makes a tuple DEAD
during the tiny window between each step. This was the only case where
a tuple considered DEAD by VACUUM still had storage following pruning.
VACUUM's definition of dead tuples is now uniformly simple and
unambiguous: dead tuples from each page are always LP_DEAD line pointers
that were encountered just after we performed pruning (and just before
we considered freezing remaining items with tuple storage).
Eliminating the tupgone=true special case enables INDEX_CLEANUP=off
style skipping of index vacuuming that takes place based on flexible,
dynamic criteria. The INDEX_CLEANUP=off case had to know about skipping
indexes up-front before now, due to a subtle interaction with the
special case (see commit dd695979) -- this was a special case unto
itself. Now there are no special cases. And so now it won't matter
when or how we decide to skip index vacuuming: it won't affect how
pruning behaves, and it won't be affected by any of the implementation
details of pruning or freezing.
Also remove XLOG_HEAP2_CLEANUP_INFO records. These are no longer
necessary because we now rely entirely on heap pruning taking care of
recovery conflicts. There is no longer any need to generate recovery
conflicts for DEAD tuples that pruning just missed. This also means
that heap vacuuming now uses exactly the same strategy for recovery
conflicts as index vacuuming always has: REDO routines never need to
process a latestRemovedXid from the WAL record, since earlier REDO of
the WAL record from pruning is sufficient in all cases. The generic
XLOG_HEAP2_CLEAN record type is now split into two new record types to
reflect this new division (these are called XLOG_HEAP2_PRUNE and
XLOG_HEAP2_VACUUM).
Also stop acquiring a super-exclusive lock for heap pages when they're
vacuumed during VACUUM's second heap pass. A regular exclusive lock is
enough. This is correct because heap page vacuuming is now strictly a
matter of setting the LP_DEAD line pointers to LP_UNUSED. No other
backend can have a pointer to a tuple located in a pinned buffer that
can be invalidated by a concurrent heap page vacuum operation.
Heap vacuuming can now be thought of as conceptually similar to index
vacuuming and conceptually dissimilar to heap pruning. Heap pruning now
has sole responsibility for anything involving the logical contents of
the database (e.g., managing transaction status information, recovery
conflicts, considering what to do with HOT chains). Index vacuuming and
heap vacuuming are now only concerned with recycling garbage items from
physical data structures that back the logical database.
Bump XLOG_PAGE_MAGIC due to pruning and heap page vacuum WAL record
changes.
Credit for the idea of retrying pruning a page to avoid the tupgone case
goes to Andres Freund.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznneCXTzuFmcwx_EyRQgfsfJAAsu+CsqRFmFXCAar=nJw@mail.gmail.com
Not much to say here: does what it says on the tin.
We steal a previously-always-zero bit from the nextOffset
field of leaf index tuples in order to track whether there
is a nulls bitmap. Otherwise it works about like included
columns in other index types.
Pavel Borisov, reviewed by Andrey Borodin and Anastasia Lubennikova,
and rather heavily editorialized on by me
Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com
Reorganize the state struct used by VACUUM -- group related items
together to make it easier to understand. Also stop relying on stack
variables inside lazy_scan_heap() -- move those into the state struct
instead. Doing things this way simplifies large groups of related
functions whose function signatures had a lot of unnecessary redundancy.
Switch over to using int64 for the struct fields used to count things
that are reported to the user via log_autovacuum and VACUUM VERBOSE
output. We were using double, but that doesn't seem to have any
advantages. Using int64 makes it possible to add assertions that verify
that the first pass over the heap (pruning) encounters precisely the
same number of LP_DEAD items that get deleted from indexes later on, in
the second pass over the heap. These assertions will be added in later
commits.
Finally, adjust the signatures of functions with IndexBulkDeleteResult
pointer arguments in cases where there was ambiguity about whether or
not the argument relates to a single index or all indexes. Functions
now use the idiom that both ambulkdelete() and amvacuumcleanup() have
always used (where appropriate): accept a mutable IndexBulkDeleteResult
pointer argument, and return a result IndexBulkDeleteResult pointer to
caller.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkeOSYwC6KNckbhk2b1aNnWum6Yyn0NKP9D-Hq1LGTDPw@mail.gmail.com
According to the documentation, the attType passed to the opclass
config function (and also relied on by the core code) is the type
of the heap column or expression being indexed. But what was
actually being passed was the type stored for the index column.
This made no difference for user-defined SP-GiST opclasses,
because we weren't allowing the STORAGE clause of CREATE OPCLASS
to be used, so the two types would be the same. But it's silly
not to allow that, seeing that the built-in poly_ops opclass
has a different value for opckeytype than opcintype, and that if you
want to do lossy storage then the types must really be different.
(Thus, user-defined opclasses doing lossy storage had to lie about
what type is in the index.) Hence, remove the restriction, and make
sure that we use the input column type not opckeytype where relevant.
For reasons of backwards compatibility with existing user-defined
opclasses, we can't quite insist that the specified leafType match
the STORAGE clause; instead just add an amvalidate() warning if
they don't match.
Also fix some bugs that would only manifest when trying to return
index entries when attType is different from attLeafType. It's not
too surprising that these have not been reported, because the only
usual reason for such a difference is to store the leaf value
lossily, rendering index-only scans impossible.
Add a src/test/modules module to exercise cases where attType is
different from attLeafType and yet index-only scan is supported.
Discussion: https://postgr.es/m/3728741.1617381471@sss.pgh.pa.us
The existing convention in SP-GiST is that any pass-by-value datatype
is stored in Datum representation, i.e. it's of width sizeof(Datum)
even when typlen is less than that. This is okay, or at least it's
too late to change it, for prefix datums and node-label datums in inner
(upper) tuples. But it's problematic for leaf datums, because we'd
prefer those to be stored in Postgres' standard on-disk representation
so that we can easily extend leaf tuples to carry additional "included"
columns.
I believe, however, that we can get away with just up and changing that.
This would be an unacceptable on-disk-format break, but there are two
big mitigating factors:
1. It seems quite unlikely that there are any SP-GiST opclasses out
there that use pass-by-value leaf datatypes. Certainly none of the
ones in core do, nor has codesearch.debian.net heard of any. Given
what SP-GiST is good for, it's hard to conceive of a use-case where
the leaf-level values would be both small and fixed-width. (As an
example, if you wanted to index text values with the leaf level being
just a byte, then every text string would have to be represented
with one level of inner tuple per preceding byte, which would be
horrendously space-inefficient and slow to access. You always want
to use as few inner-tuple levels as possible, leaving as much as
possible in the leaf values.)
2. Even granting that you have such an index, this change only
breaks things on big-endian machines. On little-endian, the high
order bytes of the Datum format will now just appear to be alignment
padding space.
So, change the code to store pass-by-value leaf datums in their
usual on-disk form. Inner-tuple datums are not touched.
This is extracted from a larger patch that intends to add support for
"included" columns. I'm committing it separately for visibility in
our commit logs.
Pavel Borisov and Tom Lane, reviewed by Andrey Borodin
Discussion: https://postgr.es/m/CALT9ZEFi-vMp4faht9f9Junb1nO3NOSjhpxTmbm1UGLMsLqiEQ@mail.gmail.com
The design of the data structures which allow storage of the per-worker
memory during parallel seq scans were not ideal. The work done in
56788d215 required an additional data structure to allow workers to
remember the range of pages that had been allocated to them for
processing during a parallel seqscan. That commit added a void pointer
field to TableScanDescData to allow heapam to store the per-worker
allocation information. However putting the field there made very little
sense given that we have AM specific structs for that, e.g.
HeapScanDescData.
Here we remove the void pointer field from TableScanDescData and add a
dedicated field for this purpose to HeapScanDescData.
Previously we also allocated memory for this parallel per-worker data for
all scans, regardless if it was a parallel scan or not. This was just a
wasted allocation for non-parallel scans, so here we make the allocation
conditional on the scan being parallel.
Also, add previously missing pfree() to free the per-worker data in
heap_endscan().
Reported-by: Andres Freund
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20210317023101.anvejcfotwka6gaa@alap3.anarazel.de
Adds BRIN opclasses similar to the existing minmax, except that instead
of summarizing the page range into a single [min,max] range, the summary
consists of multiple ranges and/or points, allowing gaps. This allows
more efficient handling of data with poor correlation to physical
location within the table and/or outlier values, for which the regular
minmax opclassed tend to work poorly.
It's possible to specify the number of values kept for each page range,
either as a single point or an interval boundary.
CREATE TABLE t (a int);
CREATE INDEX ON t
USING brin (a int4_minmax_multi_ops(values_per_range=16));
When building the summary, the values are combined into intervals with
the goal to minimize the "covering" (sum of interval lengths), using a
support procedure computing distance between two values.
Bump catversion, due to various catalog changes.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Sokolov Yura <y.sokolov@postgrespro.ru>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
Discussion: https://postgr.es/m/5d78b774-7e9c-c94e-12cf-fef51cc89b1a%402ndquadrant.com
Change the default_toast_compression GUC to be an enum rather than
a string. Earlier, uncommitted versions of the patch supported using
CREATE ACCESS METHOD to add new compression methods to a running
system, but that idea was dropped before commit. So, we can simplify
the GUC handling as well, which has the nice side effect of improving
the error messages.
While updating the documentation to reflect the new GUC type, also
move it back to the right place in the list. I moved this while
revising what became commit 24f0e395ac,
but apparently the intended ordering is "alphabetical" rather than
"whatever Robert thinks looks nice."
Rejigger things to avoid having access/toast_compression.h depend on
utils/guc.h, so that we don't end up with every file that includes
it also depending on something largely unrelated. Move a few
inline functions back into the C source file partly to help reduce
dependencies and partly just to avoid clutter. A few very minor
cosmetic fixes.
Original patch by Justin Pryzby, but very heavily edited by me,
and reverse reviewed by him and also reviewed by by Tom Lane.
Discussion: http://postgr.es/m/CA+TgmoYp=GT_ztUCeZg2i4hkHAQv8o=-nVJ1-TKWTG1zQOmOpg@mail.gmail.com
To allow inserts in parallel-mode this feature has to ensure that all the
constraints, triggers, etc. are parallel-safe for the partition hierarchy
which is costly and we need to find a better way to do that. Additionally,
we could have used existing cached information in some cases like indexes,
domains, etc. to determine the parallel-safety.
List of commits reverted, in reverse chronological order:
ed62d3737c Doc: Update description for parallel insert reloption.
c8f78b6161 Add a new GUC and a reloption to enable inserts in parallel-mode.
c5be48f092 Improve FK trigger parallel-safety check added by 05c8482f7f.
e2cda3c20a Fix use of relcache TriggerDesc field introduced by commit 05c8482f7f.
e4e87a32cc Fix valgrind issue in commit 05c8482f7f.
05c8482f7f Enable parallel SELECT for "INSERT INTO ... SELECT ...".
Discussion: https://postgr.es/m/E1lMiB9-0001c3-SY@gemulon.postgresql.org
The handling of IS [NOT] NULL clauses is independent of an opclass, and
most of the code was exactly the same in both minmax and inclusion. So
instead move the code from support procedures to the AM.
This simplifies the code - especially the support procedures - quite a
bit, as they don't need to care about NULL values and flags at all. It
also means the IS [NOT] NULL clauses can be evaluated without invoking
the support procedure.
Author: Tomas Vondra <tomas.vondra@postgresql.org>
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Reviewed-by: Nikita Glukhov <n.gluhov@postgrespro.ru>
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Masahiko Sawada <masahiko.sawada@enterprisedb.com>
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Discussion: https://postgr.es/m/c1138ead-7668-f0e1-0638-c3be3237e812@2ndquadrant.com
substring(), and perhaps other callers, isn't careful to pass a
slice length that is no more than the datum's true size. Since
toast_decompress_datum_slice's children will palloc the requested
slice length, this can waste memory. Also, close study of the liblz4
documentation suggests that it is dependent on the caller to not ask
for more than the correct amount of decompressed data; this squares
with observed misbehavior with liblz4 1.8.3. Avoid these problems
by switching to the normal full-decompression code path if the
slice request is >= datum's decompressed size.
Tom Lane and Dilip Kumar
Discussion: https://postgr.es/m/507597.1616370729@sss.pgh.pa.us
The authors of bbe0a81db hadn't quite got the idea that macros named
like SOMETHING_4B_C were only meant for internal endianness-related
details in postgres.h. Choose more legible names for macros that are
intended to be used elsewhere. Rearrange postgres.h a bit to clarify
the separation between those internal macros and ones intended for
wider use.
Also, avoid using the term "rawsize" for true decompressed size;
we've used "extsize" for that, because "rawsize" generally denotes
total Datum size including header. This choice seemed particularly
unfortunate in tests that were comparing one of these meanings to
the other.
This patch includes a couple of not-purely-cosmetic changes: be
sure that the shifts aligning compression methods are unsigned
(not critical today, but will be when compression method 2 exists),
and fix broken definition of VARATT_EXTERNAL_GET_COMPRESSION (now
VARATT_EXTERNAL_GET_COMPRESS_METHOD), whose callers worked only
accidentally.
Discussion: https://postgr.es/m/574197.1616428079@sss.pgh.pa.us
Maintain a simple array of metadata about pages that were deleted during
nbtree VACUUM's current btvacuumscan() call. Use this metadata at the
end of btvacuumscan() to attempt to place newly deleted pages in the FSM
without further delay. It might not yet be safe to place any of the
pages in the FSM by then (they may not be deemed recyclable), but we
have little to lose and plenty to gain by trying. In practice there is
a very good chance that this will work out when vacuuming larger
indexes, where scanning the index naturally takes quite a while.
This commit doesn't change the page recycling invariants; it merely
improves the efficiency of page recycling within the confines of the
existing design. Recycle safety is a part of nbtree's implementation of
what Lanin & Shasha call "the drain technique". The design happens to
use transaction IDs (they're stored in deleted pages), but that in
itself doesn't align the cutoff for recycle safety to any of the
XID-based cutoffs used by VACUUM (e.g., OldestXmin). All that matters
is whether or not _other_ backends might be able to observe various
inconsistencies in the tree structure (that they cannot just detect and
recover from by moving right). Recycle safety is purely a question of
maintaining the consistency (or the apparent consistency) of a physical
data structure.
Note that running a simple serial test case involving a large range
DELETE followed by a VACUUM VERBOSE will probably show that any newly
deleted nbtree pages are not yet reusable/recyclable. This is expected
in the absence of even one concurrent XID assignment. It is an old
implementation restriction. In practice it's unlikely to be the thing
that makes recycling remain unsafe, at least with larger indexes, where
recycling newly deleted pages during the same VACUUM actually matters.
An important high-level goal of this commit (as well as related recent
commits e5d8a999 and 9f3665fb) is to make expensive deferred cleanup
operations in index AMs rare in general. If index vacuuming frequently
depends on the next VACUUM operation finishing off work that the current
operation started, then the general behavior of index vacuuming is hard
to predict. This is relevant to ongoing work that adds a vacuumlazy.c
mechanism to skip index vacuuming in certain cases. Anything that makes
the real world behavior of index vacuuming simpler and more linear will
also make top-down modeling in vacuumlazy.c more robust.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzk76_P=67iUscb1UN44-gyZL-KgpsXbSxq_bdcMa7Q+wQ@mail.gmail.com
Compilers that don't understand that elog(ERROR) doesn't return
issued warnings here. In the cases in libpq_pipeline.c, we were
not exactly helping things by failing to mark pg_fatal() as noreturn.
Per buildfarm.
There is now a per-column COMPRESSION option which can be set to pglz
(the default, and the only option in up until now) or lz4. Or, if you
like, you can set the new default_toast_compression GUC to lz4, and
then that will be the default for new table columns for which no value
is specified. We don't have lz4 support in the PostgreSQL code, so
to use lz4 compression, PostgreSQL must be built --with-lz4.
In general, TOAST compression means compression of individual column
values, not the whole tuple, and those values can either be compressed
inline within the tuple or compressed and then stored externally in
the TOAST table, so those properties also apply to this feature.
Prior to this commit, a TOAST pointer has two unused bits as part of
the va_extsize field, and a compessed datum has two unused bits as
part of the va_rawsize field. These bits are unused because the length
of a varlena is limited to 1GB; we now use them to indicate the
compression type that was used. This means we only have bit space for
2 more built-in compresison types, but we could work around that
problem, if necessary, by introducing a new vartag_external value for
any further types we end up wanting to add. Hopefully, it won't be
too important to offer a wide selection of algorithms here, since
each one we add not only takes more coding but also adds a build
dependency for every packager. Nevertheless, it seems worth doing
at least this much, because LZ4 gets better compression than PGLZ
with less CPU usage.
It's possible for LZ4-compressed datums to leak into composite type
values stored on disk, just as it is for PGLZ. It's also possible for
LZ4-compressed attributes to be copied into a different table via SQL
commands such as CREATE TABLE AS or INSERT .. SELECT. It would be
expensive to force such values to be decompressed, so PostgreSQL has
never done so. For the same reasons, we also don't force recompression
of already-compressed values even if the target table prefers a
different compression method than was used for the source data. These
architectural decisions are perhaps arguable but revisiting them is
well beyond the scope of what seemed possible to do as part of this
project. However, it's relatively cheap to recompress as part of
VACUUM FULL or CLUSTER, so this commit adjusts those commands to do
so, if the configured compression method of the table happens not to
match what was used for some column value stored therein.
Dilip Kumar. The original patches on which this work was based were
written by Ildus Kurbangaliev, and those were patches were based on
even earlier work by Nikita Glukhov, but the design has since changed
very substantially, since allow a potentially large number of
compression methods that could be added and dropped on a running
system proved too problematic given some of the architectural issues
mentioned above; the choice of which specific compression method to
add first is now different; and a lot of the code has been heavily
refactored. More recently, Justin Przyby helped quite a bit with
testing and reviewing and this version also includes some code
contributions from him. Other design input and review from Tomas
Vondra, Álvaro Herrera, Andres Freund, Oleg Bartunov, Alexander
Korotkov, and me.
Discussion: http://postgr.es/m/20170907194236.4cefce96%40wp.localdomain
Discussion: http://postgr.es/m/CAFiTN-uUpX3ck%3DK0mLEk-G_kUQY%3DSNOTeqdaNRR9FMdQrHKebw%40mail.gmail.com
While looking at Robert Foggia's report, I noticed a passel of
other issues in the same area:
* The scheme for backslash-quoting newlines in pathnames is just
wrong; it will misbehave if the last ordinary character in a pathname
is a backslash. I'm not sure why we're bothering to allow newlines
in tablespace paths, but if we're going to do it we should do it
without introducing other problems. Hence, backslashes themselves
have to be backslashed too.
* The author hadn't read the sscanf man page very carefully, because
this code would drop any leading whitespace from the path. (I doubt
that a tablespace path with leading whitespace could happen in
practice; but if we're bothering to allow newlines in the path, it
sure seems like leading whitespace is little less implausible.) Using
sscanf for the task of finding the first space is overkill anyway.
* While I'm not 100% sure what the rationale for escaping both \r and
\n is, if the idea is to allow Windows newlines in the file then this
code failed, because it'd throw an error if it saw \r followed by \n.
* There's no cross-check for an incomplete final line in the map file,
which would be a likely apparent symptom of the improper-escaping
bug.
On the generation end, aside from the escaping issue we have:
* If needtblspcmapfile is true then do_pg_start_backup will pass back
escaped strings in tablespaceinfo->path values, which no caller wants
or is prepared to deal with. I'm not sure if there's a live bug from
that, but it looks like there might be (given the dubious assumption
that anyone actually has newlines in their tablespace paths).
* It's not being very paranoid about the possibility of random stuff
in the pg_tblspc directory. IMO we should ignore anything without an
OID-like name.
The escaping rule change doesn't seem back-patchable: it'll require
doubling of backslashes in the tablespace_map file, which is basically
a basebackup format change. The odds of that causing trouble are
considerably more than the odds of the existing bug causing trouble.
The rest of this seems somewhat unlikely to cause problems too,
so no back-patch.
Simplify _bt_vacuum_needs_cleanup() functions's signature (it only needs
a single 'rel' argument now), and move it next to its sibling function
in nbtpage.c.
I believe that _bt_vacuum_needs_cleanup() was originally located in
nbtree.c due to an include dependency issue. That's no longer an issue.
Follow-up to commit 9f3665fb.
Commit 9f3665fb removed the vacuum_cleanup_index_scale_factor storage
parameter. However, that creates dump/reload hazards when moving across
major versions.
Add back the vacuum_cleanup_index_scale_factor parameter (though not the
GUC of the same name) purely to avoid problems when using tools like
pg_upgrade. The parameter remains disabled and undocumented.
No backpatch to Postgres 13, since vacuum_cleanup_index_scale_factor was
only disabled by REL_13_STABLE's version of master branch commit
9f3665fb in the first place -- the parameter already looks like this on
REL_13_STABLE.
Discussion: https://postgr.es/m/YEm/a3Ko3nKnBuVq@paquier.xyz
Previously, the code and documentation seem to have essentially
assumed than a call to pg_wal_replay_pause() would take place
immediately, but that's not the case, because we only check for a
pause in certain places. This means that a tool that uses this
function and then wants to do something else afterward that is
dependent on the pause having taken effect doesn't know how long it
needs to wait to be sure that no more WAL is going to be replayed.
To avoid that, add a new function pg_get_wal_replay_pause_state()
which returns either 'not paused', 'paused requested', or 'paused'.
After calling pg_wal_replay_pause() the status will immediate change
from 'not paused' to 'pause requested'; when the startup process
has noticed this, the status will change to 'pause'. For backward
compatibility, pg_is_wal_replay_paused() still exists and returns
the same thing as before: true if a pause has been requested,
whether or not it has taken effect yet; and false if not.
The documentation is updated to clarify.
To improve the changes that a pause request is quickly confirmed
effective, adjust things so that WaitForWALToBecomeAvailable will
swiftly reach a call to recoveryPausesHere() when a pause request
is made.
Dilip Kumar, reviewed by Simon Riggs, Kyotaro Horiguchi, Yugo Nagata,
Masahiko Sawada, and Bharath Rupireddy.
Discussion: http://postgr.es/m/CAFiTN-vcLLWEm8Zr%3DYK83rgYrT9pbC8VJCfa1kY9vL3AUPfu6g%40mail.gmail.com
Remove the entire idea of "stale stats" within nbtree VACUUM (stop
caring about stats involving the number of inserted tuples). Also
remove the vacuum_cleanup_index_scale_factor GUC/param on the master
branch (though just disable them on postgres 13).
The vacuum_cleanup_index_scale_factor/stats interface made the nbtree AM
partially responsible for deciding when pg_class.reltuples stats needed
to be updated. This seems contrary to the spirit of the index AM API,
though -- it is not actually necessary for an index AM's bulk delete and
cleanup callbacks to provide accurate stats when it happens to be
inconvenient. The core code owns that. (Index AMs have the authority
to perform or not perform certain kinds of deferred cleanup based on
their own considerations, such as page deletion and recycling, but that
has little to do with pg_class.reltuples/num_index_tuples.)
This issue was fairly harmless until the introduction of the
autovacuum_vacuum_insert_threshold feature by commit b07642db, which had
an undesirable interaction with the vacuum_cleanup_index_scale_factor
mechanism: it made insert-driven autovacuums perform full index scans,
even though there is no real benefit to doing so. This has been tied to
a regression with an append-only insert benchmark [1].
Also have remaining cases that perform a full scan of an index during a
cleanup-only nbtree VACUUM indicate that the final tuple count is only
an estimate. This prevents vacuumlazy.c from setting the index's
pg_class.reltuples in those cases (it will now only update pg_class when
vacuumlazy.c had TIDs for nbtree to bulk delete). This arguably fixes
an oversight in deduplication-related bugfix commit 48e12913.
[1] https://smalldatum.blogspot.com/2021/01/insert-benchmark-postgres-is-still.html
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoA4WHthN5uU6+WScZ7+J_RcEjmcuH94qcoUPuB42ShXzg@mail.gmail.com
Backpatch: 13-, where autovacuum_vacuum_insert_threshold was added.
Parallel SELECT can't be utilized for INSERT in the following cases:
- INSERT statement uses the ON CONFLICT DO UPDATE clause
- Target table has a parallel-unsafe: trigger, index expression or
predicate, column default expression or check constraint
- Target table has a parallel-unsafe domain constraint on any column
- Target table is a partitioned table with a parallel-unsafe partition key
expression or support function
The planner is updated to perform additional parallel-safety checks for
the cases listed above, for determining whether it is safe to run INSERT
in parallel-mode with an underlying parallel SELECT. The planner will
consider using parallel SELECT for "INSERT INTO ... SELECT ...", provided
nothing unsafe is found from the additional parallel-safety checks, or
from the existing parallel-safety checks for SELECT.
While checking parallel-safety, we need to check it for all the partitions
on the table which can be costly especially when we decide not to use a
parallel plan. So, in a separate patch, we will introduce a GUC and or a
reloption to enable/disable parallelism for Insert statements.
Prior to entering parallel-mode for the execution of INSERT with parallel
SELECT, a TransactionId is acquired and assigned to the current
transaction state. This is necessary to prevent the INSERT from attempting
to assign the TransactionId whilst in parallel-mode, which is not allowed.
This approach has a disadvantage in that if the underlying SELECT does not
return any rows, then the TransactionId is not used, however that
shouldn't happen in practice in many cases.
Author: Greg Nancarrow, Amit Langote, Amit Kapila
Reviewed-by: Amit Langote, Hou Zhijie, Takayuki Tsunakawa, Antonin Houska, Bharath Rupireddy, Dilip Kumar, Vignesh C, Zhihong Yu, Amit Kapila
Tested-by: Tang, Haiying
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
This commit adds new GUC track_wal_io_timing. When this is enabled,
the total amounts of time XLogWrite writes and issue_xlog_fsync syncs
WAL data to disk are counted in pg_stat_wal. This information would be
useful to check how much WAL write and sync affect the performance.
Enabling track_wal_io_timing will make the server query the operating
system for the current time every time WAL is written or synced,
which may cause significant overhead on some platforms. To avoid such
additional overhead in the server with track_io_timing enabled,
this commit introduces track_wal_io_timing as a separate parameter from
track_io_timing.
Note that WAL write and sync activity by walreceiver has not been tracked yet.
This commit makes the server also track the numbers of times XLogWrite
writes and issue_xlog_fsync syncs WAL data to disk, in pg_stat_wal,
regardless of the setting of track_wal_io_timing. This counters can be
used to calculate the WAL write and sync time per request, for example.
Bump PGSTAT_FILE_FORMAT_ID.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-By: Japin Li, Hayato Kuroda, Masahiko Sawada, David Johnston, Fujii Masao
Discussion: https://postgr.es/m/0509ad67b585a5b86a83d445dfa75392@oss.nttdata.com
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
Teach VACUUM VERBOSE to report on pages deleted by the _current_ VACUUM
operation -- these are newly deleted pages. VACUUM VERBOSE continues to
report on the total number of deleted pages in the entire index (no
change there). The former is a subset of the latter.
The distinction between each category of deleted index page only arises
with index AMs where page deletion is supported and is decoupled from
page recycling for performance reasons.
This is follow-up work to commit e5d8a999, which made nbtree store
64-bit XIDs (not 32-bit XIDs) in pages at the point at which they're
deleted. Note that the btm_last_cleanup_num_delpages metapage field
added by that commit usually gets set to pages_newly_deleted. The
exceptions (the scenarios in which they're not equal) all seem to be
tricky cases for the implementation (of page deletion and recycling) in
general.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX%3Dd5u-tRYhi-F4wnV2uN2zHpMUXw%40mail.gmail.com
Otherwise we risk "leaking" deleted pages by making them non-recyclable
indefinitely. Commit 6655a729 did the same thing for deleted pages in
GiST indexes. That work was used as a starting point here.
Stop storing an XID indicating the oldest bpto.xact across all deleted
though unrecycled pages in nbtree metapages. There is no longer any
reason to care about that condition/the oldest XID. It only ever made
sense when wraparound was something _bt_vacuum_needs_cleanup() had to
consider.
The btm_oldest_btpo_xact metapage field has been repurposed and renamed.
It is now btm_last_cleanup_num_delpages, which is used to remember how
many non-recycled deleted pages remain from the last VACUUM (in practice
its value is usually the precise number of pages that were _newly
deleted_ during the specific VACUUM operation that last set the field).
The general idea behind storing btm_last_cleanup_num_delpages is to use
it to give _some_ consideration to non-recycled deleted pages inside
_bt_vacuum_needs_cleanup() -- though never too much. We only really
need to avoid leaving a truly excessive number of deleted pages in an
unrecycled state forever. We only do this to cover certain narrow cases
where no other factor makes VACUUM do a full scan, and yet the index
continues to grow (and so actually misses out on recycling existing
deleted pages).
These metapage changes result in a clear user-visible benefit: We no
longer trigger full index scans during VACUUM operations solely due to
the presence of only 1 or 2 known deleted (though unrecycled) blocks
from a very large index. All that matters now is keeping the costs and
benefits in balance over time.
Fix an issue that has been around since commit 857f9c36, which added the
"skip full scan of index" mechanism (i.e. the _bt_vacuum_needs_cleanup()
logic). The accuracy of btm_last_cleanup_num_heap_tuples accidentally
hinged upon _when_ the source value gets stored. We now always store
btm_last_cleanup_num_heap_tuples in btvacuumcleanup(). This fixes the
issue because IndexVacuumInfo.num_heap_tuples (the source field) is
expected to accurately indicate the state of the table _after_ the
VACUUM completes inside btvacuumcleanup().
A backpatchable fix cannot easily be extracted from this commit. A
targeted fix for the issue will follow in a later commit, though that
won't happen today.
I (pgeoghegan) have chosen to remove any mention of deleted pages in the
documentation of the vacuum_cleanup_index_scale_factor GUC/param, since
the presence of deleted (though unrecycled) pages is no longer of much
concern to users. The vacuum_cleanup_index_scale_factor description in
the docs now seems rather unclear in any case, and it should probably be
rewritten in the near future. Perhaps some passing mention of page
deletion will be added back at the same time.
Bump XLOG_PAGE_MAGIC due to nbtree WAL records using full XIDs now.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznpdHvujGUwYZ8sihX=d5u-tRYhi-F4wnV2uN2zHpMUXw@mail.gmail.com
Both luckily and unluckily the passed values meant the same for all
types. Luckily because that meant my confusion caused no harm,
unluckily because otherwise the compiler might have warned...
In passing, synchronize parameter names between definition and
declaration.
Reported-By: Peter Geoghegan <pg@bowt.ie>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAH2-Wz=L=nBoepQdH9b5Qd0nMvepFT2CnT6sjWvvpOXa=K8HVQ@mail.gmail.com
The pages_removed field is no longer used for anything. It hasn't been
possible for an index to physically shrink since old-style VACUUM FULL
was removed by commit 0a469c87.
If a cross-partition UPDATE violates a constraint on the target partition,
and the columns in the new partition are in different physical order than
in the parent, the error message can reveal columns that the user does not
have SELECT permission on. A similar bug was fixed earlier in commit
804b6b6db4.
The cause of the bug is that the callers of the
ExecBuildSlotValueDescription() function got confused when constructing
the list of modified columns. If the tuple was routed from a parent, we
converted the tuple to the parent's format, but the list of modified
columns was grabbed directly from the child's RTE entry.
ExecUpdateLockMode() had a similar issue. That lead to confusion on which
columns are key columns, leading to wrong tuple lock being taken on tables
referenced by foreign keys, when a row is updated with INSERT ON CONFLICT
UPDATE. A new isolation test is added for that corner case.
With this patch, the ri_RangeTableIndex field is no longer set for
partitions that don't have an entry in the range table. Previously, it was
set to the RTE entry of the parent relation, but that was confusing.
NOTE: This modifies the ResultRelInfo struct, replacing the
ri_PartitionRoot field with ri_RootResultRelInfo. That's a bit risky to
backpatch, because it breaks any extensions accessing the field. The
change that ri_RangeTableIndex is not set for partitions could potentially
break extensions, too. The ResultRelInfos are visible to FDWs at least,
and this patch required small changes to postgres_fdw. Nevertheless, this
seem like the least bad option. I don't think these fields widely used in
extensions; I don't think there are FDWs out there that uses the FDW
"direct update" API, other than postgres_fdw. If there is, you will get a
compilation error, so hopefully it is caught quickly.
Backpatch to 11, where support for both cross-partition UPDATEs, and unique
indexes on partitioned tables, were added.
Reviewed-by: Amit Langote
Security: CVE-2021-3393
Make sure COPY FREEZE marks the pages as PD_ALL_VISIBLE and updates the
visibility map. Until now we only marked individual tuples as frozen,
but page-level flags were not updated, so the first VACUUM after the
COPY FREEZE had to rewrite the whole table.
This is a fairly old patch, and multiple people worked on it. The first
version was written by Jeff Janes, and then reworked by Pavan Deolasee
and Anastasia Lubennikova.
Author: Anastasia Lubennikova, Pavan Deolasee, Jeff Janes
Reviewed-by: Kuntal Ghosh, Jeff Janes, Tomas Vondra, Masahiko Sawada,
Andres Freund, Ibrar Ahmed, Robert Haas, Tatsuro Ishii,
Darafei Praliaskouski
Discussion: https://postgr.es/m/CABOikdN-ptGv0mZntrK2Q8OtfUuAjqaYMGmkdU1dCKFtUxVLrg@mail.gmail.com
Discussion: https://postgr.es/m/CAMkU%3D1w3osJJ2FneELhhNRLxfZitDgp9FPHee08NT2FQFmz_pQ%40mail.gmail.com
Every core SLRU wraps around. With the exception of pg_notify, the wrap
point can fall in the middle of a page. Account for this in the
PagePrecedes callback specification and in SimpleLruTruncate()'s use of
said callback. Update each callback implementation to fit the new
specification. This changes SerialPagePrecedesLogically() from the
style of asyncQueuePagePrecedes() to the style of CLOGPagePrecedes().
(Whereas pg_clog and pg_serial share a key space, pg_serial is nothing
like pg_notify.) The bug fixed here has the same symptoms and user
followup steps as 592a589a04. Back-patch
to 9.5 (all supported versions).
Reviewed by Andrey Borodin and (in earlier versions) by Tom Lane.
Discussion: https://postgr.es/m/20190202083822.GC32531@gust.leadboat.com
Teach nbtree and heapam to cooperate in order to eagerly remove
duplicate tuples representing dead MVCC versions. This is "bottom-up
deletion". Each bottom-up deletion pass is triggered lazily in response
to a flood of versions on an nbtree leaf page. This usually involves a
"logically unchanged index" hint (these are produced by the executor
mechanism added by commit 9dc718bd).
The immediate goal of bottom-up index deletion is to avoid "unnecessary"
page splits caused entirely by version duplicates. It naturally has an
even more useful effect, though: it acts as a backstop against
accumulating an excessive number of index tuple versions for any given
_logical row_. Bottom-up index deletion complements what we might now
call "top-down index deletion": index vacuuming performed by VACUUM.
Bottom-up index deletion responds to the immediate local needs of
queries, while leaving it up to autovacuum to perform infrequent clean
sweeps of the index. The overall effect is to avoid certain
pathological performance issues related to "version churn" from UPDATEs.
The previous tableam interface used by index AMs to perform tuple
deletion (the table_compute_xid_horizon_for_tuples() function) has been
replaced with a new interface that supports certain new requirements.
Many (perhaps all) of the capabilities added to nbtree by this commit
could also be extended to other index AMs. That is left as work for a
later commit.
Extend deletion of LP_DEAD-marked index tuples in nbtree by adding logic
to consider extra index tuples (that are not LP_DEAD-marked) for
deletion in passing. This increases the number of index tuples deleted
significantly in many cases. The LP_DEAD deletion process (which is now
called "simple deletion" to clearly distinguish it from bottom-up
deletion) won't usually need to visit any extra table blocks to check
these extra tuples. We have to visit the same table blocks anyway to
generate a latestRemovedXid value (at least in the common case where the
index deletion operation's WAL record needs such a value).
Testing has shown that the "extra tuples" simple deletion enhancement
increases the number of index tuples deleted with almost any workload
that has LP_DEAD bits set in leaf pages. That is, it almost never fails
to delete at least a few extra index tuples. It helps most of all in
cases that happen to naturally have a lot of delete-safe tuples. It's
not uncommon for an individual deletion operation to end up deleting an
order of magnitude more index tuples compared to the old naive approach
(e.g., custom instrumentation of the patch shows that this happens
fairly often when the regression tests are run).
Add a further enhancement that augments simple deletion and bottom-up
deletion in indexes that make use of deduplication: Teach nbtree's
_bt_delitems_delete() function to support granular TID deletion in
posting list tuples. It is now possible to delete individual TIDs from
posting list tuples provided the TIDs have a tableam block number of a
table block that gets visited as part of the deletion process (visiting
the table block can be triggered directly or indirectly). Setting the
LP_DEAD bit of a posting list tuple is still an all-or-nothing thing,
but that matters much less now that deletion only needs to start out
with the right _general_ idea about which index tuples are deletable.
Bump XLOG_PAGE_MAGIC because xl_btree_delete changed.
No bump in BTREE_VERSION, since there are no changes to the on-disk
representation of nbtree indexes. Indexes built on PostgreSQL 12 or
PostgreSQL 13 will automatically benefit from bottom-up index deletion
(i.e. no reindexing required) following a pg_upgrade. The enhancement
to simple deletion is available with all B-Tree indexes following a
pg_upgrade, no matter what PostgreSQL version the user upgrades from.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wzm+maE3apHB8NOtmM=p-DO65j2V5GzAWCOEEuy3JZgb2g@mail.gmail.com
Add an executor aminsert() hint mechanism that informs index AMs that
the incoming index tuple (the tuple that accompanies the hint) is not
being inserted by execution of an SQL statement that logically modifies
any of the index's key columns.
The hint is received by indexes when an UPDATE takes place that does not
apply an optimization like heapam's HOT (though only for indexes where
all key columns are logically unchanged). Any index tuple that receives
the hint on insert is expected to be a duplicate of at least one
existing older version that is needed for the same logical row. Related
versions will typically be stored on the same index page, at least
within index AMs that apply the hint.
Recognizing the difference between MVCC version churn duplicates and
true logical row duplicates at the index AM level can help with cleanup
of garbage index tuples. Cleanup can intelligently target tuples that
are likely to be garbage, without wasting too many cycles on less
promising tuples/pages (index pages with little or no version churn).
This is infrastructure for an upcoming commit that will teach nbtree to
perform bottom-up index deletion. No index AM actually applies the hint
just yet.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz=CEKFa74EScx_hFVshCOn6AA5T-ajFASTdzipdkLTNQQ@mail.gmail.com
Multiranges are basically sorted arrays of non-overlapping ranges with
set-theoretic operations defined over them.
Since v14, each range type automatically gets a corresponding multirange
datatype. There are both manual and automatic mechanisms for naming multirange
types. Once can specify multirange type name using multirange_type_name
attribute in CREATE TYPE. Otherwise, a multirange type name is generated
automatically. If the range type name contains "range" then we change that to
"multirange". Otherwise, we add "_multirange" to the end.
Implementation of multiranges comes with a space-efficient internal
representation format, which evades extra paddings and duplicated storage of
oids. Altogether this format allows fetching a particular range by its index
in O(n).
Statistic gathering and selectivity estimation are implemented for multiranges.
For this purpose, stored multirange is approximated as union range without gaps.
This field will likely need improvements in the future.
Catversion is bumped.
Discussion: https://postgr.es/m/CALNJ-vSUpQ_Y%3DjXvTxt1VYFztaBSsWVXeF1y6gTYQ4bOiWDLgQ%40mail.gmail.com
Discussion: https://postgr.es/m/a0b8026459d1e6167933be2104a6174e7d40d0ab.camel%40j-davis.com#fe7218c83b08068bfffb0c5293eceda0
Author: Paul Jungwirth, revised by me
Reviewed-by: David Fetter, Corey Huinker, Jeff Davis, Pavel Stehule
Reviewed-by: Alvaro Herrera, Tom Lane, Isaac Morland, David G. Johnston
Reviewed-by: Zhihong Yu, Alexander Korotkov
currtid() and currtid2() are an undocumented set of functions whose sole
known user is the Postgres ODBC driver, able to retrieve the latest TID
version for a tuple given by the caller of those functions.
As used by Postgres ODBC, currtid() is a shortcut able to retrieve the
last TID loaded into a backend by passing an OID of 0 (magic value)
after a tuple insertion. This is removed in this commit, as it became
obsolete after the driver began using "RETURNING ctid" with inserts, a
clause supported since Postgres 8.2 (using RETURNING is better for
performance anyway as it reduces the number of round-trips to the
backend).
currtid2() is still used by the driver, so this remains around for now.
Note that this function is kept in its original shape for backward
compatibility reasons.
Per discussion with many people, including Andres Freund, Peter
Eisentraut, Álvaro Herrera, Hiroshi Inoue, Tom Lane and myself.
Bump catalog version.
Discussion: https://postgr.es/m/20200603021448.GB89559@paquier.xyz
Historically these were called >^ and <^, but that is inconsistent
with the similar box, polygon, and circle operators, which are named
|>> and <<| respectively. Worse, the >^ and <^ names are used for
*not* strict above/below tests for the box type.
Hence, invent new operators following the more common naming. The
old operators remain available for now, and are still accepted by
the relevant index opclasses too. But there's a deprecation notice,
so maybe we can get rid of them someday.
Emre Hasegeli, reviewed by Pavel Borisov
Discussion: https://postgr.es/m/24348.1587444160@sss.pgh.pa.us
Streamline handling of the various strategies that we have to avoid a
page split in nbtinsert.c. When it looks like a leaf page is about to
overflow, we now perform deleting LP_DEAD items and deduplication in one
central place. This greatly simplifies _bt_findinsertloc().
This has an independently useful consequence: nbtree no longer relies on
the BTP_HAS_GARBAGE page level flag/hint for anything important. We
still set and unset the flag in the same way as before, but it's no
longer treated as a gating condition when considering if we should check
for already-set LP_DEAD bits. This happens at the point where the page
looks like it might have to be split anyway, so simply checking the
LP_DEAD bits in passing is practically free. This avoids missing
LP_DEAD bits just because the page-level hint is unset, which is
probably reasonably common (e.g. it happens when VACUUM unsets the
page-level flag without actually removing index tuples whose LP_DEAD-bit
was set recently, after the VACUUM operation began but before it reached
the leaf page in question).
Note that this isn't a big behavioral change compared to PostgreSQL 13.
We were already checking for set LP_DEAD bits regardless of whether the
BTP_HAS_GARBAGE page level flag was set before we considered doing a
deduplication pass. This commit only goes slightly further by doing the
same check for all indexes, even indexes where deduplication won't be
performed.
We don't completely remove the BTP_HAS_GARBAGE flag. We still rely on
it as a gating condition with pg_upgrade'd indexes from before B-tree
version 4/PostgreSQL 12. That makes sense because we sometimes have to
make a choice among pages full of duplicates when inserting a tuple with
pre version 4 indexes. It probably still pays to avoid accessing the
line pointer array of a page there, since it won't yet be clear whether
we'll insert on to the page in question at all, let alone split it as a
result.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz%3DYpc1PDdk8OVJDChGJBjT06%3DA0Mbv9HyTLCsOknGcUFg%40mail.gmail.com
Previously, we called fsync() after writing out individual pg_xact,
pg_multixact and pg_commit_ts pages due to cache pressure, leading to
regular I/O stalls in user backends and recovery. Collapse requests for
the same file into a single system call as part of the next checkpoint,
as we already did for relation files, using the infrastructure developed
by commit 3eb77eba. This can cause a significant improvement to
recovery performance, especially when it's otherwise CPU-bound.
Hoist ProcessSyncRequests() up into CheckPointGuts() to make it clearer
that it applies to all the SLRU mini-buffer-pools as well as the main
buffer pool. Rearrange things so that data collected in CheckpointStats
includes SLRU activity.
Also remove the Shutdown{CLOG,CommitTS,SUBTRANS,MultiXact}() functions,
because they were redundant after the shutdown checkpoint that
immediately precedes them. (I'm not sure if they were ever needed, but
they aren't now.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (parts)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA+hUKGLJ=84YT+NvhkEEDAuUtVHMfQ9i-N7k_o50JmQ6Rpj_OQ@mail.gmail.com
This adds a new optional support function to the GiST access method:
sortsupport. If it is defined, the GiST index is built by sorting all data
to the order defined by the sortsupport's comparator function, and packing
the tuples in that order to GiST pages. This is similar to how B-tree
index build works, and is much faster than inserting the tuples one by
one. The resulting index is smaller too, because the pages are packed more
tightly, upto 'fillfactor'. The normal build method works by splitting
pages, which tends to lead to more wasted space.
The quality of the resulting index depends on how good the opclass-defined
sort order is. A good order preserves locality of the input data.
As the first user of this facility, add 'sortsupport' function to the
point_ops opclass. It sorts the points in Z-order (aka Morton Code), by
interleaving the bits of the X and Y coordinates.
Author: Andrey Borodin
Reviewed-by: Pavel Borisov, Thomas Munro
Discussion: https://www.postgresql.org/message-id/1A36620E-CAD8-4267-9067-FB31385E7C0D%40yandex-team.ru
When multiple relations are reindexed, a scan of pg_class is done first
to build the list of relations to work on. However the REINDEX logic
has never checked if a relation listed still exists when beginning the
work on it, causing for example sudden cache lookup failures.
This commit adds safeguards against dropped relations for REINDEX,
similarly to VACUUM or CLUSTER where we try to open the relation,
ignoring it if it is missing. A new option is added to the REINDEX
routines to control if a missed relation is OK to ignore or not.
An isolation test, based on REINDEX SCHEMA, is added for the concurrent
and non-concurrent cases.
Author: Michael Paquier
Reviewed-by: Anastasia Lubennikova
Discussion: https://postgr.es/m/20200813043805.GE11663@paquier.xyz
Historically, we've considered the state with relpages and reltuples
both zero as indicating that we do not know the table's tuple density.
This is problematic because it's impossible to distinguish "never yet
vacuumed" from "vacuumed and seen to be empty". In particular, a user
cannot use VACUUM or ANALYZE to override the planner's normal heuristic
that an empty table should not be believed to be empty because it is
probably about to get populated. That heuristic is a good safety
measure, so I don't care to abandon it, but there should be a way to
override it if the table is indeed intended to stay empty.
Hence, represent the initial state of ignorance by setting reltuples
to -1 (relpages is still set to zero), and apply the minimum-ten-pages
heuristic only when reltuples is still -1. If the table is empty,
VACUUM or ANALYZE (but not CREATE INDEX) will override that to
reltuples = relpages = 0, and then we'll plan on that basis.
This requires a bunch of fiddly little changes, but we can get rid of
some ugly kluges that were formerly needed to maintain the old definition.
One notable point is that FDWs' GetForeignRelSize methods will see
baserel->tuples = -1 when no ANALYZE has been done on the foreign table.
That seems like a net improvement, since those methods were formerly
also in the dark about what baserel->tuples = 0 really meant. Still,
it is an API change.
I bumped catversion because code predating this change would get confused
by seeing reltuples = -1.
Discussion: https://postgr.es/m/F02298E0-6EF4-49A1-BCB6-C484794D9ACC@thebuild.com
The additional information added will be an offset number for heap
operations. This information will help us in finding the exact tuple due
to which the error has occurred.
Author: Mahendra Singh Thalor and Amit Kapila
Reviewed-by: Sawada Masahiko, Justin Pryzby and Amit Kapila
Discussion: https://postgr.es/m/CAKYtNApK488TDF4bMbw+1QH8HJf9cxdNDXquhU50TK5iv_FtCQ@mail.gmail.com
Previous commits made it faster/more scalable to compute snapshots. But not
building a snapshot is still faster. Now that GetSnapshotData() does not
maintain RecentGlobal* anymore, that is actually not too hard:
This commit introduces xactCompletionCount, which tracks the number of
top-level transactions with xids (i.e. which may have modified the database)
that completed in some form since the start of the server.
We can avoid rebuilding the snapshot's contents whenever the current
xactCompletionCount is the same as it was when the snapshot was
originally built. Currently this check happens while holding
ProcArrayLock. While it's likely possible to perform the check without
acquiring ProcArrayLock, it seems better to do that separately /
later, some careful analysis is required. Even with the lock this is a
significant win on its own.
On a smaller two socket machine this gains another ~1.03x, on a larger
machine the effect is roughly double (earlier patch version tested
though). If we were able to safely avoid the lock there'd be another
significant gain on top of that.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
xact.h included utils/datetime.h, which cannot be used in the frontend
(it includes fmgr.h, which needs Datum). But xact.h only needs the
definition of TimestampTz from it, which is available directly in
datatypes/timestamp.h. Change xact.h to include that instead of
utils/datetime.h, so that it can be used in client programs.
Reuse cautionary language from src/test/ssl/README in
src/test/kerberos/README. SLRUs have had access to six-character
segments names since commit 73c986adde,
and recovery stopped calling HeapTupleHeaderAdvanceLatestRemovedXid() in
commit 558a9165e0. The other corrections
are more self-evident.
To make GetSnapshotData() more scalable, it cannot not look at at each proc's
xmin: While snapshot contents do not need to change whenever a read-only
transaction commits or a snapshot is released, a proc's xmin is modified in
those cases. The frequency of xmin modifications leads to, particularly on
higher core count systems, many cache misses inside GetSnapshotData(), despite
the data underlying a snapshot not changing. That is the most
significant source of GetSnapshotData() scaling poorly on larger systems.
Without accessing xmins, GetSnapshotData() cannot calculate accurate horizons /
thresholds as it has so far. But we don't really have to: The horizons don't
actually change that much between GetSnapshotData() calls. Nor are the horizons
actually used every time a snapshot is built.
The trick this commit introduces is to delay computation of accurate horizons
until there use and using horizon boundaries to determine whether accurate
horizons need to be computed.
The use of RecentGlobal[Data]Xmin to decide whether a row version could be
removed has been replaces with new GlobalVisTest* functions. These use two
thresholds to determine whether a row can be pruned:
1) definitely_needed, indicating that rows deleted by XIDs >= definitely_needed
are definitely still visible.
2) maybe_needed, indicating that rows deleted by XIDs < maybe_needed can
definitely be removed
GetSnapshotData() updates definitely_needed to be the xmin of the computed
snapshot.
When testing whether a row can be removed (with GlobalVisTestIsRemovableXid())
and the tested XID falls in between the two (i.e. XID >= maybe_needed && XID <
definitely_needed) the boundaries can be recomputed to be more accurate. As it
is not cheap to compute accurate boundaries, we limit the number of times that
happens in short succession. As the boundaries used by
GlobalVisTestIsRemovableXid() are never reset (with maybe_needed updated by
GetSnapshotData()), it is likely that further test can benefit from an earlier
computation of accurate horizons.
To avoid regressing performance when old_snapshot_threshold is set (as that
requires an accurate horizon to be computed), heap_page_prune_opt() doesn't
unconditionally call TransactionIdLimitedForOldSnapshots() anymore. Both the
computation of the limited horizon, and the triggering of errors (with
SetOldSnapshotThresholdTimestamp()) is now only done when necessary to remove
tuples.
This commit just removes the accesses to PGXACT->xmin from
GetSnapshotData(), but other members of PGXACT residing in the same
cache line are accessed. Therefore this in itself does not result in a
significant improvement. Subsequent commits will take advantage of the
fact that GetSnapshotData() now does not need to access xmins anymore.
Note: This contains a workaround in heap_page_prune_opt() to keep the
snapshot_too_old tests working. While that workaround is ugly, the tests
currently are not meaningful, and it seems best to address them separately.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
The reason for doing so is that a subsequent commit will need that to
avoid wraparound issues. As the subsequent change is large this was
split out for easier review.
The reason this is not a perfect straight-forward change is that we do
not want track 64bit xids in the procarray or the WAL. Therefore we
need to advance lastestCompletedXid in relation to 32 bit xids. The
code for that is now centralized in MaintainLatestCompletedXid*.
Author: Andres Freund
Reviewed-By: Thomas Munro, Robert Haas, David Rowley
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
Including Full in variable names duplicates the type information and
leads to overly long names. As FullTransactionId cannot accidentally
be casted to TransactionId that does not seem necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20200724011143.jccsyvsvymuiqfxu@alap3.anarazel.de
Instead of serializing the transaction to disk after reaching the
logical_decoding_work_mem limit in memory, we consume the changes we have
in memory and invoke stream API methods added by commit 45fdc9738b.
However, sometimes if we have incomplete toast or speculative insert we
spill to the disk because we can't generate the complete tuple and stream.
And, as soon as we get the complete tuple we stream the transaction
including the serialized changes.
We can do this incremental processing thanks to having assignments
(associating subxact with toplevel xacts) in WAL right away, and
thanks to logging the invalidation messages at each command end. These
features are added by commits 0bead9af48 and c55040ccd0 respectively.
Now that we can stream in-progress transactions, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We handle such failures by returning ERRCODE_TRANSACTION_ROLLBACK
sqlerrcode from system table scan APIs to the backend or WALSender
decoding a specific uncommitted transaction. The decoding logic on the
receipt of such a sqlerrcode aborts the decoding of the current
transaction and continue with the decoding of other transactions.
We have ReorderBufferTXN pointer in each ReorderBufferChange by which we
know which xact it belongs to. The output plugin can use this to decide
which changes to discard in case of stream_abort_cb (e.g. when a subxact
gets discarded).
We also provide a new option via SQL APIs to fetch the changes being
streamed.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila, Nikhil Sontakke
Reviewed-by: Amit Kapila, Kuntal Ghosh, Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
This allows AM-specific knowledge to be applied during creation of
pg_amop and pg_amproc entries. Specifically, the AM knows better than
core code which entries to consider as required or optional. Giving
the latter entries the appropriate sort of dependency allows them to
be dropped without taking out the whole opclass or opfamily; which
is something we'd like to have to correct obsolescent entries in
extensions.
This callback also opens the door to performing AM-specific validity
checks during opclass creation, rather than hoping than an opclass
developer will remember to test with "amvalidate". For the most part
I've not actually added any such checks yet; that can happen in a
follow-on patch. (Note that we shouldn't remove any tests from
"amvalidate", as those are still needed to cross-check manually
constructed entries in the initdb data. So adding tests to
"amadjustmembers" will be somewhat duplicative, but it seems like
a good idea anyway.)
Patch by me, reviewed by Alexander Korotkov, Hamid Akhtar, and
Anastasia Lubennikova.
Discussion: https://postgr.es/m/4578.1565195302@sss.pgh.pa.us
When fast promotion was supported in 9.3, non-fast promotion became
undocumented feature and it's basically not available for ordinary users.
However we decided not to remove non-fast promotion at that moment,
to leave it for a release or two for debugging purpose or as an emergency
method because fast promotion might have some issues, and then to
remove it later. Now, several versions were released since that decision
and there is no longer reason to keep supporting non-fast promotion.
Therefore this commit removes non-fast promotion.
Author: Fujii Masao
Reviewed-by: Hamid Akhtar, Kyotaro Horiguchi
Discussion: https://postgr.es/m/76066434-648f-f567-437b-54853b43398f@oss.nttdata.com
Previously we would allocate blocks to parallel workers during a parallel
sequential scan 1 block at a time. Since other workers were likely to
request a block before a worker returns for another block number to work
on, this could lead to non-sequential I/O patterns in each worker which
could cause the operating system's readahead to perform poorly or not at
all.
Here we change things so that we allocate consecutive "chunks" of blocks
to workers and have them work on those until they're done, at which time
we allocate another chunk for the worker. The size of these chunks is
based on the size of the relation.
Initial patch here was by Thomas Munro which showed some good improvements
just having a fixed chunk size of 64 blocks with a simple ramp-down near
the end of the scan. The revisions of the patch to make the chunk size
based on the relation size and the adjusted ramp-down in powers of two was
done by me, along with quite extensive benchmarking to determine the
optimal chunk sizes.
For the most part, benchmarks have shown significant performance
improvements for large parallel sequential scans on Linux, FreeBSD and
Windows using SSDs. It's less clear how this affects the performance of
cloud providers. Tests done so far are unable to obtain stable enough
performance to provide meaningful benchmark results. It is possible that
this could cause some performance regressions on more obscure filesystems,
so we may need to later provide users with some ability to get something
closer to the old behavior. For now, let's leave that until we see that
it's really required.
Author: Thomas Munro, David Rowley
Reviewed-by: Ranier Vilela, Soumyadeep Chakraborty, Robert Haas
Reviewed-by: Amit Kapila, Kirk Jamison
Discussion: https://postgr.es/m/CA+hUKGJ_EErDv41YycXcbMbCBkztA34+z1ts9VQH+ACRuvpxig@mail.gmail.com
When wal_level=logical, write invalidations at command end into WAL so
that decoding can use this information.
This patch is required to allow the streaming of in-progress transactions
in logical decoding. The actual work to allow streaming will be committed
as a separate patch.
We still add the invalidations to the cache and write them to WAL at
commit time in RecordTransactionCommit(). This uses the existing
XLOG_INVALIDATIONS xlog record type, from the RM_STANDBY_ID resource
manager (see LogStandbyInvalidations for details).
So existing code relying on those invalidations (e.g. redo) does not need
to be changed.
The invalidations written at command end uses a new xlog record type
XLOG_XACT_INVALIDATIONS, from RM_XACT_ID resource manager. See
LogLogicalInvalidations for details.
These new xlog records are ignored by existing redo procedures, which
still rely on the invalidations written to commit records.
The invalidations are decoded and accumulated in top-transaction, and then
executed during replay. This obviates the need to decode the
invalidations as part of a commit record.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_XACT_INVALIDATIONS.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Holding just a buffer pin (with no buffer lock) on an nbtree buffer/page
provides very weak guarantees, especially compared to heapam, where it's
often safe to read a page while only holding a buffer pin. This commit
has Valgrind enforce the following rule: it is never okay to access an
nbtree buffer without holding both a pin and a lock on the buffer.
A draft version of this patch detected questionable code that was
cleaned up by commits fa7ff642 and 7154aa16. The code in question used
to access an nbtree buffer page's special/opaque area with no buffer
lock (only a buffer pin). This practice (which isn't obviously unsafe)
is hereby formally disallowed in nbtree. There doesn't seem to be any
reason to allow it, and banning it keeps things simple for Valgrind.
The new checks are implemented by adding custom nbtree client requests
(located in LockBuffer() wrapper functions); these requests are
"superimposed" on top of the generic bufmgr.c Valgrind client requests
added by commit 1e0dfd16. No custom resource management cleanup code is
needed to undo the effects of marking buffers as non-accessible under
this scheme.
Author: Peter Geoghegan
Reviewed-By: Anastasia Lubennikova, Georgios Kokolatos
Discussion: https://postgr.es/m/CAH2-WzkLgyN3zBvRZ1pkNJThC=xi_0gpWRUb_45eexLH1+k2_Q@mail.gmail.com
max_slot_wal_keep_size that was added in v13 and wal_keep_segments are
the GUC parameters to specify how much WAL files to retain for
the standby servers. While max_slot_wal_keep_size accepts the number of
bytes of WAL files, wal_keep_segments accepts the number of WAL files.
This difference of setting units between those similar parameters could
be confusing to users.
To alleviate this situation, this commit renames wal_keep_segments to
wal_keep_size, and make users specify the WAL size in it instead of
the number of WAL files.
There was also the idea to rename max_slot_wal_keep_size to
max_slot_wal_keep_segments, in the discussion. But we have been moving
away from measuring in segments, for example, checkpoint_segments was
replaced by max_wal_size. So we concluded to rename wal_keep_segments
to wal_keep_size.
Back-patch to v13 where max_slot_wal_keep_size was added.
Author: Fujii Masao
Reviewed-by: Álvaro Herrera, Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/574b4ea3-e0f9-b175-ead2-ebea7faea855@oss.nttdata.com
The logical decoding infrastructure needs to know which top-level
transaction the subxact belongs to, in order to decode all the
changes. Until now that might be delayed until commit, due to the
caching (GPROC_MAX_CACHED_SUBXIDS), preventing features requiring
incremental decoding.
So we also write the assignment info into WAL immediately, as part
of the next WAL record (to minimize overhead) only when wal_level=logical.
We can not remove the existing XLOG_XACT_ASSIGNMENT WAL as that is
required for avoiding overflow in the hot standby snapshot.
Bump XLOG_PAGE_MAGIC, since this introduces XLR_BLOCK_ID_TOPLEVEL_XID.
Author: Tomas Vondra, Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
Incorrect function names were referenced. As this fixes some portions
of tableam.h, that is mentioned in the docs as something to look at when
implementing a table AM, backpatch down to 12 where this has been
introduced.
Author: Hironobu Suzuki
Discussion: https://postgr.es/m/8fe6d672-28dd-3f1d-7aed-ac2f6d599d3f@interdb.jp
Backpatch-through: 12
The previous definition of the column was almost universally disliked,
so provide this updated definition which is more useful for monitoring
purposes: a large positive value is good, while zero or a negative value
means danger. This should be operationally more convenient.
Backpatch to 13, where the new column to pg_replication_slots (and the
feature it represents) were added.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/9ddfbf8c-2f67-904d-44ed-cf8bc5916228@oss.nttdata.com
Commit 0d861bbb, which added deduplication to nbtree, had
_bt_check_unique() pass a TID to table_index_fetch_tuple_check() that
isn't safe to mutate. table_index_fetch_tuple_check()'s tid argument is
modified when the TID in question is not the latest visible tuple in a
hot chain, though this wasn't documented.
To fix, go back to using a local copy of the TID in _bt_check_unique(),
and update comments above table_index_fetch_tuple_check().
Backpatch: 13-, where B-Tree deduplication was introduced.
In pg_replication_slot, change output from normal/reserved/lost to
reserved/extended/unreserved/ lost, which better expresses the possible
states particularly near the time where segments are no longer safe but
checkpoint has not run yet.
Under the new definition, reserved means the slot is consuming WAL
that's still under the normal WAL size constraints; extended means it's
consuming WAL that's being protected by wal_keep_segments or the slot
itself, whose size is below max_slot_wal_keep_size; unreserved means the
WAL is no longer safe, but checkpoint has not yet removed those files.
Such as slot is in imminent danger, but can still continue for a little
while and may catch up to the reserved WAL space.
Also, there were some bugs in the calculations used to report the
status; fixed those.
Backpatch to 13.
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200616.120236.1809496990963386593.horikyota.ntt@gmail.com
The function has been reading global variable forceSyncCommit, mirroring
the intent of the caller that passed forceSync=forceSyncCommit. The
other caller, RecordTransactionCommitPrepared(), passed false. Since
COMMIT PREPARED can't share a transaction with any command, it certainly
doesn't share a transaction with a command that sets forceSyncCommit.
Reviewed by Michael Paquier.
Discussion: https://postgr.es/m/20200617032615.GC2916904@rfd.leadboat.com
It was possible for deduplication's single value strategy to mistakenly
believe that a very small duplicate tuple counts as one of the six large
tuples that it aims to leave behind after the page finally splits. This
could cause slightly suboptimal space utilization with very low
cardinality indexes, though only under fairly narrow conditions.
To fix, be particular about what kind of tuple counts as a
maxpostingsize-capped tuple. This avoids confusion in the event of a
small tuple that gets "wedged" between two large tuples, where all
tuples on the page are duplicates of the same value.
Discussion: https://postgr.es/m/CAH2-Wz=Y+sgSFc-O3LpiZX-POx2bC+okec2KafERHuzdVa7-rQ@mail.gmail.com
Backpatch: 13-, where deduplication was introduced (by commit 0d861bbb)
Commit 72d422a522 made xlog.c call
sendTablespace() with the 'sizeonly' argument set to true, which
required basebackup.c to export sendTablespace(). However, that's
kind of ugly, so instead defer the call to sendTablespace() until
basebackup.c regains control. That way, it can still be a static
function.
Patch by me, reviewed by Amit Kapila and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/CA+TgmoYq+59SJ2zBbP891ngWPA9fymOqntqYcweSDYXS2a620A@mail.gmail.com
Since database connections can be used with WAL senders in 9.4, it is
possible to use physical replication. This commit fixes a crash when
starting physical replication with a WAL sender using a database
connection, caused by the refactoring done in 850196b.
There have been discussions about forbidding the use of physical
replication in a database connection, but this is left for later,
taking care only of the crash new to 13.
While on it, add a test to check for a failure when attempting logical
replication if the WAL sender does not have a database connection. This
part is extracted from a larger patch by Kyotaro Horiguchi.
Reported-by: Vladimir Sitnikov
Author: Michael Paquier, Kyotaro Horiguchi
Reviewed-by: Kyotaro Horiguchi, Álvaro Herrera
Discussion: https://postgr.es/m/CAB=Je-GOWMj1PTPkeUhjqQp-4W3=nW-pXe2Hjax6rJFffB5_Aw@mail.gmail.com
Backpatch-through: 13
Originally, the names assigned to SLRUs had no purpose other than
being shmem lookup keys, so not a lot of thought went into them.
As of v13, though, we're exposing them in the pg_stat_slru view and
the pg_stat_reset_slru function, so it seems advisable to take a bit
more care. Rename them to names based on the associated on-disk
storage directories (which fortunately we *did* think about, to some
extent; since those are also visible to DBAs, consistency seems like
a good thing). Also rename the associated LWLocks, since those names
are likewise user-exposed now as wait event names.
For the most part I only touched symbols used in the respective modules'
SimpleLruInit() calls, not the names of other related objects. This
renaming could have been taken further, and maybe someday we will do so.
But for now it seems undesirable to change the names of any globally
visible functions or structs, so some inconsistency is unavoidable.
(But I *did* terminate "oldserxid" with prejudice, as I found that
name both unreadable and not descriptive of the SLRU's contents.)
Table 27.12 needs re-alphabetization now, but I'll leave that till
after the other LWLock renamings I have in mind.
Discussion: https://postgr.es/m/28683.1589405363@sss.pgh.pa.us
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
Instead of re-identifying which statistics bucket to use for a given
SLRU on every counter increment, do it once during shmem initialization.
This saves a fair number of cycles, and there's no real cost because
we could not have a bucket assignment that varies over time or across
backends anyway.
Also, get rid of the ill-considered decision to let pgstat.c pry
directly into SLRU's shared state; it's cleaner just to have slru.c
pass the stats bucket number.
In consequence of these changes, there's no longer any need to store
an SLRU's LWLock tranche info in shared memory, so get rid of that,
making this a net reduction in shmem consumption. (That partly
reverts fe702a7b3.)
This is basically code review for 28cac71bd, so I also cleaned up
some comments, removed a dangling extern declaration, fixed some
things that should be static and/or const, etc.
Discussion: https://postgr.es/m/3618.1589313035@sss.pgh.pa.us
* Have both physical and logical walsender share a 'xlogreader' state
struct for tracking state. This replaces the existing globals sendSeg
and sendCxt.
* Change WALRead not to receive XLogReaderState->seg and ->segcxt as
separate arguments anymore; just use the ones from 'state'. This is
made possible by the above change.
* have the XLogReader segment_open contract require the callbacks to
install the file descriptor in the state struct themselves instead of
returning it. xlogreader was already ignoring any possible failed
return from the callbacks, relying solely on them never returning.
(This point is not altogether excellent, as it means the callbacks
have to know more of XLogReaderState; but to really improve on that
we would have to pass back error info from the callbacks to
xlogreader. And the complexity would not be saved but instead just
transferred to the callers of WALRead, which would have to learn how
to throw errors from the open_segment callback in addition of, as
currently, from pg_pread.)
* segment_open no longer receives the 'segcxt' as a separate argument,
since it's part of the XLogReaderState argument.
Per comments from Kyotaro Horiguchi.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200511203336.GA9913@alvherre.pgsql
Restructure the function that locates the root of the to-be-deleted
subtree during nbtree page deletion. Handle the conditions that make
page deletion unsafe in a slightly more uniform way, and acknowledge the
fact that the behavior with incomplete splits on internal pages is
different (as pointed out in the nbtree README as of commit 35bc0ec7).
Also invent new terminology that avoids ambiguity around which pages are
about to be deleted. Consistently use the term "to-be-deleted subtree",
not the ambiguous term "branch".
We were calling the subtree parent page the "top parent page", but that
was quite misleading. The top parent page usually refers to a page
unlinked from its siblings and marked deleted (during the second stage
of page deletion). There was one kind of top parent page that we merely
removed a downlink from, and another kind of top parent page that we
actually marked deleted. Eliminate the ambiguity by inventing a new
term ("subtree parent page") that refers to the former kind of page
only.
The one in xlogreader.h was pointed out by Antonin Houska; I (Álvaro) noticed the
others by grepping.
Author: Antonin Houska <ah@cybertec.at>
Discussion: https://postgr.es/m/28250.1589186654@antos
Code review for 0dc8ead463, prompted by a bug closed by 91c40548d5.
XLogReader's system for opening and closing segments had gotten too
complicated, with callbacks being passed at both the XLogReaderAllocate
level (read_page) as well as at the WALRead level (segment_open). This
was confusing and hard to follow, so restructure things so that these
callbacks are passed together at XLogReaderAllocate time, and add
another callback to the set (segment_close) to make it a coherent whole.
Also, ensure XLogReaderState is an argument to all the callbacks, so
that they can grab at the ->private data if necessary.
Document the whole arrangement more clearly.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20200422175754.GA19858@alvherre.pgsql
In commit 33e05f89c5, we have added the option to display WAL usage
statistics in Explain and auto_explain. The display format used two spaces
between each field which is inconsistent with Buffer usage statistics which
is using one space between each field. Change the format to make WAL usage
statistics consistent with Buffer usage statistics.
This commit also changed the usage of "full page writes" to
"full page images" for WAL usage statistics to make it consistent with
other parts of code and docs.
Author: Julien Rouhaud, Amit Kapila
Reviewed-by: Justin Pryzby, Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
The logic for determining how many nbtree pages in an index are deleted
pages sometimes undercounted pages. Pages that were deleted by the
current VACUUM operation (as opposed to some previous VACUUM operation
whose deleted pages have yet to be reused) were sometimes overlooked.
The final count is exposed to users through VACUUM VERBOSE's "%u index
pages have been deleted" output.
btvacuumpage() avoided double-counting when _bt_pagedel() deleted more
than one page by assuming that only one page was deleted, and that the
additional deleted pages would get picked up during a future call to
btvacuumpage() by the same VACUUM operation. _bt_pagedel() can
legitimately delete pages that the btvacuumscan() scan will not visit
again, though, so that assumption was slightly faulty.
Fix the accounting by teaching _bt_pagedel() about its caller's
requirements. It now only reports on pages that it knows btvacuumscan()
won't visit again (including the current btvacuumpage() page), so
everything works out in the end.
This bug has been around forever. Only backpatch to v11, though, to
keep _bt_pagedel() is sync on the branches that have today's bugfix
commit b0229f26da. Note that this commit changes the signature of
_bt_pagedel(), just like commit b0229f26da.
Author: Peter Geoghegan
Reviewed-By: Masahiko Sawada
Discussion: https://postgr.es/m/CAH2-WzkrXBcMQWAYUJMFTTvzx_r4q=pYSjDe07JnUXhe+OZnJA@mail.gmail.com
Backpatch: 11-
Commit 857f9c36cd (which taught nbtree VACUUM to skip a scan of the
index from btcleanup in situations where it doesn't seem worth it) made
VACUUM maintain the oldest btpo.xact among all deleted pages for the
index as a whole. It failed to handle all the details surrounding pages
that are deleted by the current VACUUM operation correctly (though pages
deleted by some previous VACUUM operation were processed correctly).
The most immediate problem was that the special area of the page was
examined without a buffer pin at one point. More fundamentally, the
handling failed to account for the full range of _bt_pagedel()
behaviors. For example, _bt_pagedel() sometimes deletes internal pages
in passing, as part of deleting an entire subtree with btvacuumpage()
caller's page as the leaf level page. The original leaf page passed to
_bt_pagedel() might not be the page that it deletes first in cases where
deletion can take place.
It's unclear how disruptive this bug may have been, or what symptoms
users might want to look out for. The issue was spotted during
unrelated code review.
To fix, push down the logic for maintaining the oldest btpo.xact to
_bt_pagedel(). btvacuumpage() is now responsible for pages that were
fully deleted by a previous VACUUM operation, while _bt_pagedel() is now
responsible for pages that were deleted by the current VACUUM operation
(this includes half-dead pages from a previous interrupted VACUUM
operation that become fully deleted in _bt_pagedel()). Note that
_bt_pagedel() should never encounter an existing deleted page.
This commit theoretically breaks the ABI of a stable release by changing
the signature of _bt_pagedel(). However, if any third party extension
is actually affected by this, then it must already be completely broken
(since there are numerous assumptions made in _bt_pagedel() that cannot
be met outside of VACUUM). It seems highly unlikely that such an
extension actually exists, in any case.
Author: Peter Geoghegan
Reviewed-By: Masahiko Sawada
Discussion: https://postgr.es/m/CAH2-WzkrXBcMQWAYUJMFTTvzx_r4q=pYSjDe07JnUXhe+OZnJA@mail.gmail.com
Backpatch: 11-, where the "skip full scan" feature was introduced.
78ea8b5 has fixed an issue related to the recycling of WAL segments on
standbys depending on archive_mode. However, it has introduced a
regression with the handling of WAL segments ready to be archived during
crash recovery, causing those files to be recycled without getting
archived.
This commit fixes the regression by tracking in shared memory if a live
cluster is either in crash recovery or archive recovery as the handling
of WAL segments ready to be archived is different in both cases (those
WAL segments should not be removed during crash recovery), and by using
this new shared memory state to decide if a segment can be recycled or
not. Previously, it was not possible to know if a cluster was in crash
recovery or archive recovery as the shared state was able to track only
if recovery was happening or not, leading to the problem.
A set of TAP tests is added to close the gap here, making sure that WAL
segments ready to be archived are correctly handled when a cluster is in
archive or crash recovery with archive_mode set to "on" or "always", for
both standby and primary.
Reported-by: Benoît Lobréau
Author: Jehan-Guillaume de Rorthais
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/20200331172229.40ee00dc@firost
Backpatch-through: 9.5
The mask was added by commit 8224de4f, which introduced INCLUDE nbtree
indexes. The status bits really were reserved initially. We now use 2
out of 4 of the bits for additional tuple metadata, though. Rename the
mask to BT_STATUS_OFFSET_MASK.
Also consolidate related nbtree.h code comments about the format of
pivot tuples and posting list tuples.
An nbtree split point can be thought of as a point between two adjoining
tuples from an imaginary version of the page being split that includes
the incoming/new item (in addition to the items that really are on the
page). These adjoining tuples are called the lastleft and firstright
tuples.
The variables that represent split points contained a field called
firstright, which is an offset number of the first data item from the
original page that goes on the new right page. The corresponding tuple
from origpage was usually the same thing as the actual firstright tuple,
but not always: the firstright tuple is sometimes the new/incoming item
instead. This situation seems unnecessarily confusing.
Make things clearer by renaming the origpage offset returned by
_bt_findsplitloc() to "firstrightoff". We now have a firstright tuple
and a firstrightoff offset number which are comparable to the
newitem/lastleft tuples and the newitemoff/lastleftoff offset numbers
respectively. Also make sure that we are consistent about how we
describe nbtree page split point state.
Push the responsibility for dealing with pg_upgrade'd !heapkeyspace
indexes down to lower level code, relieving _bt_split() from dealing
with it directly. This means that we always have a palloc'd left page
high key on the leaf level, no matter what. This enables simplifying
some of the code (and code comments) within _bt_split().
Finally, restructure the page split code to make it clearer why suffix
truncation (which only takes place during leaf page splits) is
completely different to the first data item truncation that takes place
during internal page splits. Tuples are marked as having fewer
attributes stored in both cases, and the firstright tuple is truncated
in both cases, so it's easy to imagine somebody missing the distinction.
First pass of modifying various places that obtain the next power of 2 of
a number and make them use the new functions added in pg_bitutils.h
instead.
This also removes the _hash_log2() function. There are no longer any
callers in core. Other users can swap their _hash_log2(n) call to make use
of pg_ceil_log2_32(n).
Author: David Fetter, with some minor adjustments by me
Reviewed-by: John Naylor, Jesse Zhang
Discussion: https://postgr.es/m/20200114173553.GE32763%40fetter.org
Since heap TID is supposed to be just another key attribute to the
implementation, it doesn't make much sense to have separate
BTreeTupleSetNAtts() and BTreeTupleSetAltHeapTID() functions. Merge the
two functions together. This slightly simplifies _bt_truncate().
Replication slots are useful to retain data that may be needed by a
replication system. But experience has shown that allowing them to
retain excessive data can lead to the primary failing because of running
out of space. This new feature allows the user to configure a maximum
amount of space to be reserved using the new option
max_slot_wal_keep_size. Slots that overrun that space are invalidated
at checkpoint time, enabling the storage to be released.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20170228.122736.123383594.horiguchi.kyotaro@lab.ntt.co.jp
Similar to xid, but 64 bits wide. This new type is suitable for use in
various system views and administration functions.
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Takao Fujii <btfujiitkp@oss.nttdata.com>
Reviewed-by: Yoshikazu Imai <imai.yoshikazu@fujitsu.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Discussion: https://postgr.es/m/20190725000636.666m5mad25wfbrri%40alap3.anarazel.de
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
This allows gathering the WAL generation statistics for each statement
execution. The three statistics that we collect are the number of WAL
records, the number of full page writes and the amount of WAL bytes
generated.
This helps the users who have write-intensive workload to see the impact
of I/O due to WAL. This further enables us to see approximately what
percentage of overall WAL is due to full page writes.
In the future, we can extend this functionality to allow us to compute the
the exact amount of WAL data due to full page writes.
This patch in itself is just an infrastructure to compute WAL usage data.
The upcoming patches will expose this data via explain, auto_explain,
pg_stat_statements and verbose (auto)vacuum output.
Author: Kirill Bychik, Julien Rouhaud
Reviewed-by: Dilip Kumar, Fujii Masao and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
The definitions of the routines defined in xlogarchive.c have been part
of xlog_internal.h which is included by several frontend tools, but all
those routines are only called by the backend. More cleanup could be
done within xlog_internal.h, but that's already a nice cut.
This will help a follow-up patch for pg_rewind where handling of
restore_command is added for frontends.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Álvaro Herrera, Alexander Korotkov
Discussion: https://postgr.es/m/a3acff50-5a0d-9a2c-b3b2-ee36168955c1@postgrespro.ru
PostgreSQL provides set of template index access methods, where opclasses have
much freedom in the semantics of indexing. These index AMs are GiST, GIN,
SP-GiST and BRIN. There opclasses define representation of keys, operations on
them and supported search strategies. So, it's natural that opclasses may be
faced some tradeoffs, which require user-side decision. This commit implements
opclass parameters allowing users to set some values, which tell opclass how to
index the particular dataset.
This commit doesn't introduce new storage in system catalog. Instead it uses
pg_attribute.attoptions, which is used for table column storage options but
unused for index attributes.
In order to evade changing signature of each opclass support function, we
implement unified way to pass options to opclass support functions. Options
are set to fn_expr as the constant bytea expression. It's possible due to the
fact that opclass support functions are executed outside of expressions, so
fn_expr is unused for them.
This commit comes with some examples of opclass options usage. We parametrize
signature length in GiST. That applies to multiple opclasses: tsvector_ops,
gist__intbig_ops, gist_ltree_ops, gist__ltree_ops, gist_trgm_ops and
gist_hstore_ops. Also we parametrize maximum number of integer ranges for
gist__int_ops. However, the main future usage of this feature is expected
to be json, where users would be able to specify which way to index particular
json parts.
Catversion is bumped.
Discussion: https://postgr.es/m/d22c3a18-31c7-1879-fc11-4c1ce2f5e5af%40postgrespro.ru
Author: Nikita Glukhov, revised by me
Reviwed-by: Nikolay Shaplov, Robert Haas, Tom Lane, Tomas Vondra, Alvaro Herrera
When certain parameters are changed on a physical replication primary,
this is communicated to standbys using the XLOG_PARAMETER_CHANGE WAL
record. The standby then checks whether its own settings are at least
as big as the ones on the primary. If not, the standby shuts down
with a fatal error.
The correspondence of settings between primary and standby is required
because those settings influence certain shared memory sizings that
are required for processing WAL records that the primary might send.
For example, if the primary sends a prepared transaction, the standby
must have had max_prepared_transaction set appropriately or it won't
be able to process those WAL records.
However, fatally shutting down the standby immediately upon receipt of
the parameter change record might be a bit of an overreaction. The
resources related to those settings are not required immediately at
that point, and might never be required if the activity on the primary
does not exhaust all those resources. If we just let the standby roll
on with recovery, it will eventually produce an appropriate error when
those resources are used.
So this patch relaxes this a bit. Upon receipt of
XLOG_PARAMETER_CHANGE, we still check the settings but only issue a
warning and set a global flag if there is a problem. Then when we
actually hit the resource issue and the flag was set, we issue another
warning message with relevant information. At that point we pause
recovery, so a hot standby remains usable. We also repeat the last
warning message once a minute so it is harder to miss or ignore.
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/4ad69a4c-cc9b-0dfe-0352-8b1b0cd36c7b@2ndquadrant.com
The parameters primary_conninfo, primary_slot_name and
wal_receiver_create_temp_slot can now be changed with a simple "reload"
signal, no longer requiring a server restart. This is achieved by
signalling the walreceiver process to terminate and having it start
again with the new values.
Thanks to Andres Freund, Kyotaro Horiguchi, Fujii Masao for discussion.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/19513901543181143@sas1-19a94364928d.qloud-c.yandex.net
Commit 3297308278 gave walreceiver the ability to create and use a
temporary replication slot, and made it controllable by a GUC (enabled
by default) that can be changed with SIGHUP. That's useful but has two
problems: one, it's possible to cause the origin server to fill its disk
if the slot doesn't advance in time; and also there's a disconnect
between state passed down via the startup process and GUCs that
walreceiver reads directly.
We handle the first problem by setting the option to disabled by
default. If the user enables it, its on their head to make sure that
disk doesn't fill up.
We handle the second problem by passing the flag via startup rather than
having walreceiver acquire it directly, and making it PGC_POSTMASTER
(which ensures a walreceiver always has the fresh value). A future
commit can relax this (to PGC_SIGHUP again) by having the startup
process signal walreceiver to shutdown whenever the value changes.
Author: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200122055510.GH174860@paquier.xyz
Previously if a promotion was triggered while recovery was paused,
the paused state continued. Also recovery could be paused by executing
pg_wal_replay_pause() even while a promotion was ongoing. That is,
recovery pause had higher priority over a standby promotion.
But this behavior was not desirable because most users basically wanted
the recovery to complete as soon as possible and the server to become
the master when they requested a promotion.
This commit changes recovery so that it prefers a promotion over
recovery pause. That is, if a promotion is triggered while recovery
is paused, the paused state ends and a promotion continues. Also
this commit makes recovery pause functions like pg_wal_replay_pause()
throw an error if they are executed while a promotion is ongoing.
Internally, this commit adds new internal function PromoteIsTriggered()
that returns true if a promotion is triggered. Since the name of
this function and the existing function IsPromoteTriggered() are
confusingly similar, the commit changes the name of IsPromoteTriggered()
to IsPromoteSignaled, as more appropriate name.
Author: Fujii Masao
Reviewed-by: Atsushi Torikoshi, Sergei Kornilov
Discussion: https://postgr.es/m/00c194b2-dbbb-2e8a-5b39-13f14048ef0a@oss.nttdata.com
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
Our usual practice for "poor man's enum" catalog columns is to define
macros for the possible values and use those, not literal constants,
in C code. But for some reason lost in the mists of time, this was
never done for typalign/attalign or typstorage/attstorage. It's never
too late to make it better though, so let's do that.
The reason I got interested in this right now is the need to duplicate
some uses of the TYPSTORAGE constants in an upcoming ALTER TYPE patch.
But in general, this sort of change aids greppability and readability,
so it's a good idea even without any specific motivation.
I may have missed a few places that could be converted, and it's even
more likely that pending patches will re-introduce some hard-coded
references. But that's not fatal --- there's no expectation that
we'd actually change any of these values. We can clean up stragglers
over time.
Discussion: https://postgr.es/m/16457.1583189537@sss.pgh.pa.us
Add a cast to size_t to silence "comparison between signed and unsigned
integer expressions" cpluspluscheck warning.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/7971.1583171266@sss.pgh.pa.us
This also involves renaming src/include/utils/hashutils.h, which
becomes src/include/common/hashfn.h. Perhaps an argument can be
made for keeping the hashutils.h name, but it seemed more
consistent to make it match the name of the file, and also more
descriptive of what is actually going on here.
Patch by me, reviewed by Suraj Kharage and Mark Dilger. Off-list
advice on how not to break the Windows build from Davinder Singh
and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
Deduplication reduces the storage overhead of duplicates in indexes that
use the standard nbtree index access method. The deduplication process
is applied lazily, after the point where opportunistic deletion of
LP_DEAD-marked index tuples occurs. Deduplication is only applied at
the point where a leaf page split would otherwise be required. New
posting list tuples are formed by merging together existing duplicate
tuples. The physical representation of the items on an nbtree leaf page
is made more space efficient by deduplication, but the logical contents
of the page are not changed. Even unique indexes make use of
deduplication as a way of controlling bloat from duplicates whose TIDs
point to different versions of the same logical table row.
The lazy approach taken by nbtree has significant advantages over a GIN
style eager approach. Most individual inserts of index tuples have
exactly the same overhead as before. The extra overhead of
deduplication is amortized across insertions, just like the overhead of
page splits. The key space of indexes works in the same way as it has
since commit dd299df8 (the commit that made heap TID a tiebreaker
column).
Testing has shown that nbtree deduplication can generally make indexes
with about 10 or 15 tuples for each distinct key value about 2.5X - 4X
smaller, even with single column integer indexes (e.g., an index on a
referencing column that accompanies a foreign key). The final size of
single column nbtree indexes comes close to the final size of a similar
contrib/btree_gin index, at least in cases where GIN's posting list
compression isn't very effective. This can significantly improve
transaction throughput, and significantly reduce the cost of vacuuming
indexes.
A new index storage parameter (deduplicate_items) controls the use of
deduplication. The default setting is 'on', so all new B-Tree indexes
automatically use deduplication where possible. This decision will be
reviewed at the end of the Postgres 13 beta period.
There is a regression of approximately 2% of transaction throughput with
synthetic workloads that consist of append-only inserts into a table
with several non-unique indexes, where all indexes have few or no
repeated values. The underlying issue is that cycles are wasted on
unsuccessful attempts at deduplicating items in non-unique indexes.
There doesn't seem to be a way around it short of disabling
deduplication entirely. Note that deduplication of items in unique
indexes is fairly well targeted in general, which avoids the problem
there (we can use a special heuristic to trigger deduplication passes in
unique indexes, since we're specifically targeting "version bloat").
Bump XLOG_PAGE_MAGIC because xl_btree_vacuum changed.
No bump in BTREE_VERSION, since the representation of posting list
tuples works in a way that's backwards compatible with version 4 indexes
(i.e. indexes built on PostgreSQL 12). However, users must still
REINDEX a pg_upgrade'd index to use deduplication, regardless of the
Postgres version they've upgraded from. This is the only way to set the
new nbtree metapage flag indicating that deduplication is generally
safe.
Author: Anastasia Lubennikova, Peter Geoghegan
Reviewed-By: Peter Geoghegan, Heikki Linnakangas
Discussion:
https://postgr.es/m/55E4051B.7020209@postgrespro.ruhttps://postgr.es/m/4ab6e2db-bcee-f4cf-0916-3a06e6ccbb55@postgrespro.ru
Invent the concept of a B-Tree equalimage ("equality implies image
equality") support function, registered as support function 4. This
indicates whether it is safe (or not safe) to apply optimizations that
assume that any two datums considered equal by an operator class's order
method must be interchangeable without any loss of semantic information.
This is static information about an operator class and a collation.
Register an equalimage routine for almost all of the existing B-Tree
opclasses. We only need two trivial routines for all of the opclasses
that are included with the core distribution. There is one routine for
opclasses that index non-collatable types (which returns 'true'
unconditionally), plus another routine for collatable types (which
returns 'true' when the collation is a deterministic collation).
This patch is infrastructure for an upcoming patch that adds B-Tree
deduplication.
Author: Peter Geoghegan, Anastasia Lubennikova
Discussion: https://postgr.es/m/CAH2-Wzn3Ee49Gmxb7V1VJ3-AC8fWn-Fr8pfWQebHe8rYRxt5OQ@mail.gmail.com
Commit 147e3722f7 changed Tid scan so that it calls table_beginscan()
and uses the scan option for seq scan. This change caused two issues.
(1) The change caused Tid scan to take a predicate lock on the entire
relation in serializable transaction even when relation-level
lock is not necessary. This could lead to an unexpected
serialization error.
(2) The change caused Tid scan to increment the number of seq_scan
in pg_stat_*_tables views even though it's not seq scan. This
could confuse the users.
This commit adds the scan option for Tid scan and makes Tid scan
use it, to avoid those issues.
Back-patch to v12, where the bug was introduced.
Author: Tatsuhito Kasahara
Reviewed-by: Kyotaro Horiguchi, Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/CAP0=ZVKy+gTbFmB6X_UW0pP3WaeJ-fkUWHoD-pExS=at3CY76g@mail.gmail.com
The following changes make the predicate locking functions more
generic and suitable for use by future access methods:
- PredicateLockTuple() is renamed to PredicateLockTID(). It takes
ItemPointer and inserting transaction ID instead of HeapTuple.
- CheckForSerializableConflictIn() takes blocknum instead of buffer.
- CheckForSerializableConflictOut() no longer takes HeapTuple or buffer.
Author: Ashwin Agrawal
Reviewed-by: Andres Freund, Kuntal Ghosh, Thomas Munro
Discussion: https://postgr.es/m/CALfoeiv0k3hkEb3Oqk%3DziWqtyk2Jys1UOK5hwRBNeANT_yX%2Bng%40mail.gmail.com
The signature of XLogReadRecord() required the caller to pass the starting
WAL position as argument, or InvalidXLogRecPtr to continue reading at the
end of previous record. That's slightly awkward to the callers, as most
of them don't want to randomly jump around in the WAL stream, but start
reading at one position and then read everything from that point onwards.
Remove the 'RecPtr' argument and add a new function XLogBeginRead() to
specify the starting position instead. That's more convenient for the
callers. Also, xlogreader holds state that is reset when you change the
starting position, so having a separate function for doing that feels like
a more natural fit.
This changes XLogFindNextRecord() function so that it doesn't reset the
xlogreader's state to what it was before the call anymore. Instead, it
positions the xlogreader to the found record, like XLogBeginRead().
Reviewed-by: Kyotaro Horiguchi, Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/5382a7a3-debe-be31-c860-cb810c08f366%40iki.fi
This feature allows the vacuum to leverage multiple CPUs in order to
process indexes. This enables us to perform index vacuuming and index
cleanup with background workers. This adds a PARALLEL option to VACUUM
command where the user can specify the number of workers that can be used
to perform the command which is limited by the number of indexes on a
table. Specifying zero as a number of workers will disable parallelism.
This option can't be used with the FULL option.
Each index is processed by at most one vacuum process. Therefore parallel
vacuum can be used when the table has at least two indexes.
The parallel degree is either specified by the user or determined based on
the number of indexes that the table has, and further limited by
max_parallel_maintenance_workers. The index can participate in parallel
vacuum iff it's size is greater than min_parallel_index_scan_size.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Robert Haas, Tomas Vondra,
Mahendra Singh and Sergei Kornilov
Tested-by: Mahendra Singh and Prabhat Sahu
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1J-VoR9gzS5E75pcD-OH0mEyCdp8RihcwKrcuw7J-Q0+w@mail.gmail.com
The strategy of GIN index scan is driven by opclass-specific extract_query
method. This method that needed search mode is GIN_SEARCH_MODE_ALL. This
mode means that matching tuple may contain none of extracted entries. Simple
example is '!term' tsquery, which doesn't need any term to exist in matching
tsvector.
In order to handle such scan key GIN calculates virtual entry, which contains
all TIDs of all entries of attribute. In fact this is full scan of index
attribute. And typically this is very slow, but allows to handle some queries
correctly in GIN. However, current algorithm calculate such virtual entry for
each GIN_SEARCH_MODE_ALL scan key even if they are multiple for the same
attribute. This is clearly not optimal.
This commit improves the situation by introduction of "exclude only" scan keys.
Such scan keys are not capable to return set of matching TIDs. Instead, they
are capable only to filter TIDs produced by normal scan keys. Therefore,
each attribute should contain at least one normal scan key, while rest of them
may be "exclude only" if search mode is GIN_SEARCH_MODE_ALL.
The same optimization might be applied to the whole scan, not per-attribute.
But that leads to NULL values elimination problem. There is trade-off between
multiple possible ways to do this. We probably want to do this later using
some cost-based decision algorithm.
Discussion: https://postgr.es/m/CAOBaU_YGP5-BEt5Cc0%3DzMve92vocPzD%2BXiZgiZs1kjY0cj%3DXBg%40mail.gmail.com
Author: Nikita Glukhov, Alexander Korotkov, Tom Lane, Julien Rouhaud
Reviewed-by: Julien Rouhaud, Tomas Vondra, Tom Lane
Introduce new fields amusemaintenanceworkmem and amparallelvacuumoptions
in IndexAmRoutine for parallel vacuum. The amusemaintenanceworkmem tells
whether a particular IndexAM uses maintenance_work_mem or not. This will
help in controlling the memory used by individual workers as otherwise,
each worker can consume memory equal to maintenance_work_mem. The
amparallelvacuumoptions tell whether a particular IndexAM participates in
a parallel vacuum and if so in which phase (bulkdelete, vacuumcleanup) of
vacuum.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Tomas Vondra and Robert Haas
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.comhttps://postgr.es/m/CAA4eK1LmcD5aPogzwim5Nn58Ki+74a6Edghx4Wd8hAskvHaq5A@mail.gmail.com
Instead of always calling heap_fetch_toast_slice during detoasting,
invoke a table AM callback which, when the toast table is a heap
table, will be heap_fetch_toast_slice.
This makes it possible for a table AM other than heap to be used
as a TOAST table. It also completes the series of commits intended
to improve the interaction of tableam with TOAST that began with
commit 8b94dab06617ef80a0901ab103ebd8754427ef5a; detoast.c is
now, hopefully, fully AM-independent.
Patch by me, reviewed by Andres Freund and Peter Eisentraut.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
Previously, the toast table had to be implemented by the same AM that
was used for the main table, which was bad, because the detoasting
code won't work with anything but heap. This commit doesn't fix the
latter problem, although there's another patch coming which does,
but it does let you pick something that works (i.e. heap, right now).
Patch by me, reviewed by Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
Commit 558a9165e0 taught _bt_delitems_delete() to produce its own XID
horizon on the primary. Standbys no longer needed to generate their own
latestRemovedXid, since they could just use the explicitly logged value
from the primary instead. The deleted offset numbers array from the
xl_btree_delete WAL record was no longer used by the REDO routine for
anything other than deleting the items.
This enables a minor optimization: We now treat the array as buffer
state, not generic WAL data, following _bt_delitems_vacuum()'s example.
This should be a minor win, since it allows us to avoid including the
deleted items array in cases where XLogInsert() stores the whole buffer
anyway. The primary goal here is to make the code more maintainable,
though. Removing inessential differences between the two functions
highlights the fundamental differences that remain.
Also change xl_btree_delete to use uint32 for the size of the array of
item offsets being deleted. This brings xl_btree_delete closer to
xl_btree_vacuum. Furthermore, it seems like a good idea to use an
explicit-width integer type (the field was previously an "int").
Bump XLOG_PAGE_MAGIC because xl_btree_delete changed.
Discussion: https://postgr.es/m/CAH2-Wzkz4TjmezzfAbaV1zYrh=fr0bCpzuJTvBe5iUQ3aUPsCQ@mail.gmail.com
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
The following renaming is done so as source files related to index
access methods are more consistent with table access methods (the
original names used for index AMs ware too generic, and could be
confused as including features related to table AMs):
- amapi.h -> indexam.h.
- amapi.c -> indexamapi.c. Here we have an equivalent with
backend/access/table/tableamapi.c.
- amvalidate.c -> indexamvalidate.c.
- amvalidate.h -> indexamvalidate.h.
- genam.c -> indexgenam.c.
- genam.h -> indexgenam.h.
This has been discussed during the development of v12 when table AM was
worked on, but the renaming never happened.
Author: Michael Paquier
Reviewed-by: Fabien Coelho, Julien Rouhaud
Discussion: https://postgr.es/m/20191223053434.GF34339@paquier.xyz
Peter Eisentraut
Peter Geoghegan
Michael Paquier
Alvaro Herrera
Thomas Munro
Tom Lane
Heikki Linnakangas
Tomas Vondra
Robert Haas
Jeff Davis
Bruce Momjian
Amit Kapila
Fujii Masao
Noah Misch
Daniel Gustafsson
Alexander Korotkov
David Rowley
Andres Freund
Magnus Hagander