shift support code into heapam.c accordingly. This is in service of
soon-to-be-committed ALTER TABLE SET TABLESPACE code that will want to
use this same record type for both heaps and indexes.
Theoretically I should have forced initdb for this, but in practice there
is no change in xlog contents because CVS tip will never really emit this
record type anyhow...
locking conflict against concurrent CHECKPOINT that was discussed a few
weeks ago. Also, if not using WAL archiving (which is always true ATM
but won't be if PITR makes it into this release), there's no need to
WAL-log the index build process; it's sufficient to force-fsync the
completed index before commit. This seems to gain about a factor of 2
in my tests, which is consistent with writing half as much data. I did
not try it with WAL on a separate drive though --- probably the gain would
be a lot less in that scenario.
Make btree index creation and initial validation of foreign-key constraints
use maintenance_work_mem rather than work_mem as their memory limit.
Add some code to guc.c to allow these variables to be referenced by their
old names in SHOW and SET commands, for backwards compatibility.
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
invalid (has the wrong magic number) until the build is entirely
complete. This turns out to cost no additional writes in the normal
case, since we were rewriting the metapage at the end of the process
anyway. In normal scenarios there's no real gain in security, because
a failed index build would roll back the transaction leaving an unused
index file, but for rebuilding shared system indexes this seems to add
some useful protection.
now knows what to do upon hitting a dead page (in theory anyway, it's
untested...). Add a post-VACUUM-cleanup entry point for index AMs, to
provide a place for dead-page scavenging to happen.
Also, fix oversight that broke btpo_prev links in temporary indexes.
initdb forced due to additions in pg_am.
support btree compaction, as per proposal of a few days ago. btree index
pages no longer store parent links, instead they have a level indicator
(counting up from zero for leaf pages). The FixBTree recovery logic is
removed, and replaced by code that detects missing parent-level insertions
during WAL replay. Also, generate appropriate WAL entries when updating
btree metapage and when building a btree index from scratch. I believe
btree indexes are now completely WAL-legal for the first time.
initdb forced due to index and WAL changes.
offset past the last-used-item-plus-one, since that would result in
leaving uninitialized holes in the item pointer array. AFAICT the only
place that was depending on this was btree index build, which was being
cavalier about when to fill in the P_HIKEY pointer; easily fixed.
Also a small performance improvement: shuffle itemid's by means of
memmove, not a one-at-a-time loop.
all places, where pd_linp is accessed. Also introduce new macros
SizeOfPageHeaderData and BTMaxItemSize. This is just source code
cosmetic, no behaviour changed.
Manfred Koizar
Context diff this time.
Remove -m486 compile args for FreeBSD-i386, compile -O2 on i386.
Compile with only -O on alpha for codegen safety.
Make the port use the TEST_AND_SET for alpha and i386 on FreeBSD.
Fix a lot of bogus string formats for outputting pointers (cast to int
and %u/%x replaced with no cast and %p), and 'Size'(size_t) are now
cast to 'unsigned long' and output with %lu/
Remove an unused variable.
Alfred Perlstein
left keys during bottom-up index build, and leave some free space
instead of packing the pages to the brim (so as to avoid vast numbers
of page splits during the first interactive insertions).
duplicate keys by letting search go to the left rather than right when an
equal key is seen at an upper tree level. Fix poor choice of page split
point (leading to insertion failures) that was forced by chaining logic.
Don't store leftmost key in non-leaf pages, since it's not necessary.
Don't create root page until something is first stored in the index, so an
unused index is now 8K not 16K. (Doesn't seem to be as easy to get rid of
the metadata page, unfortunately.) Massive cleanup of unreadable code,
fix poor, obsolete, and just plain wrong documentation and comments.
See src/backend/access/nbtree/README for the gory details.
That means you can now set your options in either or all of $PGDATA/configuration,
some postmaster option (--enable-fsync=off), or set a SET command. The list of
options is in backend/utils/misc/guc.c, documentation will be written post haste.
pg_options is gone, so is that pq_geqo config file. Also removed were backend -K,
-Q, and -T options (no longer applicable, although -d0 does the same as -Q).
Added to configure an --enable-syslog option.
changed all callers from TPRINTF to elog(DEBUG)
appropriate btree three-way comparison routine. Not clear why the
three-way comparison routines were being used in some paths and not
others in btree --- incomplete changes by someone long ago, maybe?
Anyway, this makes for a nice speedup in CREATE INDEX.
a generalized module 'tuplesort.c' that can sort either HeapTuples or
IndexTuples, and is not tied to execution of a Sort node. Clean up
memory leakages in sorting, and replace nbtsort.c's private implementation
of mergesorting with calls to tuplesort.c.
Ok. I made patches replacing all of "#if FALSE" or "#if 0" to "#ifdef
NOT_USED" for current. I have tested these patches in that the
postgres binaries are identical.
> tprintf.patch
>
> tprintf.patch
>
> adds functions and macros which implement a conditional trace package
> with the ability to change flags and numeric options of running
> backends at runtime.
> Options/flags can be specified in the command line and/or read from
> the file pg_options in the data directory.
#define TAPETEMP "pg_btsortXXXXXX"
to:
#define TAPETEMP "pg_btsortXXXXXXX"
For some reason, under FreeBSD, it appears that the mktemp() value needs the
extra 'X' to improve/ensure uniqueness
==========================================
What follows is a set of diffs that cleans up the usage of BLCKSZ.
As a side effect, the person compiling the code can change the
value of BLCKSZ _at_their_own_risk_. By that, I mean that I've
tried it here at 4096 and 16384 with no ill-effects. A value
of 4096 _shouldn't_ affect much as far as the kernel/file system
goes, but making it bigger than 8192 can have severe consequences
if you don't know what you're doing. 16394 worked for me, _BUT_
when I went to 32768 and did an initdb, the SCSI driver broke and
the partition that I was running under went to hell in a hand
basket. Had to reboot and do a good bit of fsck'ing to fix things up.
The patch can be safely applied though. Just leave BLCKSZ = 8192
and everything is as before. It basically only cleans up all of the
references to BLCKSZ in the code.
If this patch is applied, a comment in the config.h file though above
the BLCKSZ define with warning about monkeying around with it would
be a good idea.
Darren darrenk@insightdist.com
(Also cleans up some of the #includes in files referencing BLCKSZ.)
==========================================
index tuple (logical position within A LEVEL). bti_oid & bti_dummy
taken off from BTItemData.
2. Fix for multi-column indices (nbtsearch.c):
_bt_binsrch() - for searches on internal pages having keysize <
number of attrs we point at the last item < the scankey, not at the
first item = the scankey;
_bt_moveright() - if keysize < number of attrs we compare scankey with
_last_ item on current page to decide should we move right or
not.
Actually required by multi-column indices support.
We still don't use btree for 'A is (not) null', but
now btree keep items with NULL attrs using single rule
for placing/finding items on pages:
NULLs greater NOT_NULLs and NULL = NULL.
+ Bulkload code (nbtsort.c) support for multi-column indices
building and NULLs.
+ Fix for btendscan()->pfree(scanopaque) from Chris Dunlop.
Patches from: aoki@CS.Berkeley.EDU (Paul M. Aoki)
i gave jolly my btree bulkload code a long, long time ago but never
gave him a bunch of my bugfixes. here's a diff against the 6.0
baseline.
for some reason, this code has slowed down somewhat relative to the
insertion-build code on very small tables. don't know why -- it used
to be within about 10%. anyway, here are some (highly unscientific!)
timings on a dec 3000/300 for synthetic tables with 10k, 100k and
1000k tuples (basically, 1mb, 10mb and 100mb heaps). 'c' means
clustered (pre-sorted) inputs and 'u' means unclustered (randomly
ordered) inputs. the 10k table basically fits in the buffer pool, but
the 100k and 1000k tables don't. as you can see, insertion build is
fine if you've sorted your heaps on your index key or if your heap
fits in core, but is absolutely horrible on unordered data (yes,
that's 7.5 hours to index 100mb of data...) because of the zillions of
random i/os.
if it doesn't work for you for whatever reason, you can always turn it
back off by flipping the FastBuild flag in nbtree.c. i don't have
time to maintain it.
good luck!
baseline code:
time psql -c 'create index c10 on k10 using btree (c int4_ops)' bttest
real 8.6
time psql -c 'create index u10 on k10 using btree (b int4_ops)' bttest
real 9.1
time psql -c 'create index c100 on k100 using btree (c int4_ops)' bttest
real 59.2
time psql -c 'create index u100 on k100 using btree (b int4_ops)' bttest
real 652.4
time psql -c 'create index c1000 on k1000 using btree (c int4_ops)' bttest
real 636.1
time psql -c 'create index u1000 on k1000 using btree (b int4_ops)' bttest
real 26772.9
bulkloading code:
time psql -c 'create index c10 on k10 using btree (c int4_ops)' bttest
real 11.3
time psql -c 'create index u10 on k10 using btree (b int4_ops)' bttest
real 10.4
time psql -c 'create index c100 on k100 using btree (c int4_ops)' bttest
real 59.5
time psql -c 'create index u100 on k100 using btree (b int4_ops)' bttest
real 63.5
time psql -c 'create index c1000 on k1000 using btree (c int4_ops)' bttest
real 636.9
time psql -c 'create index u1000 on k1000 using btree (b int4_ops)' bttest
real 701.0