The brininsert code used to initialize (and destroy) BrinDesc and
BrinRevmap for each tuple, which is not free. This patch initializes
these structures only once, and reuses them for all inserts in the same
command. The data is passed through indexInfo->ii_AmCache.
This also introduces an optional AM callback "aminsertcleanup" that
allows performing custom cleanup in case simply pfree-ing ii_AmCache is
not sufficient (which is the case when the cache contains TupleDesc,
Buffers, and so on).
Author: Soumyadeep Chakraborty
Reviewed-by: Alvaro Herrera, Matthias van de Meent, Tomas Vondra
Discussion: https://postgr.es/m/CAE-ML%2B9r2%3DaO1wwji1sBN9gvPz2xRAtFUGfnffpd0ZqyuzjamA%40mail.gmail.com
This commit log messages (at LOG level when log_replication_commands is
set, otherwise at DEBUG1 level) when walsenders acquire and release
replication slots. These messages help to know the lifetime of a
replication slot - one can know how long a streaming standby, logical
subscriber, or replication slot consumer is down. These messages will be
useful on production servers to debug and analyze inactive replication
slots.
Note that these messages are emitted only for walsenders but not for
backends. This is because walsenders are the ones that typically hold
replication slots for longer durations, unlike backends which hold them
for executing replication related functions.
Author: Bharath Rupireddy
Reviewed-by: Peter Smith, Amit Kapila, Alvaro Herrera
Discussion: http://postgr.es/m/CALj2ACX17G7F-jeLt+7KhJ6YxVeRwR8Zk0rDh4VnT546o0UpTQ@mail.gmail.com
Currently important build targets are somewhat hard to discover. This commit
documents important meson build targets in the sgml documentation. But it's
awkward to have to lookup build targets in the docs when hacking, so this also
adds a 'help' target, printing out the same information. To avoid having to
duplicate information in two places, generate both docbook and interactive
docs from a single source.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/20231108232121.ww542mt6lfo6f26f@awork3.anarazel.de
This undoes the change in what the 'docs' target builds 969509c3f2. Tom was
concerned with having a target to just build the html docs, which a prior
commit now provided explicitly.
A subsequent commit will overhaul the documentation for the documentation
targets.
While at it, move all target in doc/src/sgml/Makefile up to just after the
default "html" target, and add a comment explaining "all" is *not* the default
target.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/20230209203855.njrepiupc3rmehfw@awork3.anarazel.de
Discussion: https://postgr.es/m/20231103163848.26egkh5qdgw3vmil@awork3.anarazel.de
We have toplevel html, man targets in the autoconf build as well. It'd be odd
to have an 'html' target but have the install target be 'install-doc-html',
thus rename the install targets to match.
Reviewed-by: Christoph Berg <myon@debian.org>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/20231103163848.26egkh5qdgw3vmil@awork3.anarazel.de
On the MERGE page, the description of the privileges required could be
taken to imply that the SELECT privilege is required on all columns of
the data source, whereas actually it is only required on the columns
referred to by conditions or expressions in the MERGE command. Re-word
it to make that a little clearer, and mention expressions as well as
conditions.
Also, add a glossary entry for MERGE, and nearby on the glossary page,
mention MERGE in the list of commands that cannot update a
materialized view.
Noted by Jian He. Patch by me, reviewed by Jian He.
Discussion: https://postgr.es/m/CACJufxHuSoRXKwr0MtSFLXuT2nFVWcVfEWhxg7qdP9h%2Bs3a%2BUw%40mail.gmail.com
Previously --with-selinux was documented only in the in the sepgsql
documentation and there was no corresponding documentation for meson. There
are further improvements that could be made, but this change seems worthwhile
even on its own.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reported-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/20231103163848.26egkh5qdgw3vmil@awork3.anarazel.de
Currently, pg_stat_reset_shared() cannot reset the counters in the view
pg_stat_slru even if it is a type of shared stats. This patch adds
support for a new value in pg_stat_reset_shared(), called "slru", able
to do that. Note that pg_stat_reset_shared(NULL) also resets SLRU
counters.
There may be a point in removing pg_stat_reset_slru() that was
introduced in 28cac71bd3 (v13~) as the new option overlaps with this
function, but we would lose the ability to reset individual SLRU
counters. This is left for future reconsideration.
Author: Atsushi Torikoshi
Discussion: https://postgr.es/m/e3c25d72e81378e7b64f3c52e0306fc9@oss.nttdata.com
This adds support for infinity to the interval data type, using the
same input/output representation as the other date/time data types
that support infinity. This allows various arithmetic operations on
infinite dates, timestamps and intervals.
The new values are represented by setting all fields of the interval
to INT32/64_MIN for -infinity, and INT32/64_MAX for +infinity. This
ensures that they compare as less/greater than all other interval
values, without the need for any special-case comparison code.
Note that, since those 2 values were formerly accepted as legal finite
intervals, pg_upgrade and dump/restore from an old database will turn
them from finite to infinite intervals. That seems OK, since those
exact values should be extremely rare in practice, and they are
outside the documented range supported by the interval type, which
gives us a certain amount of leeway.
Bump catalog version.
Joseph Koshakow, Jian He, and Ashutosh Bapat, reviewed by me.
Discussion: https://postgr.es/m/CAAvxfHea4%2BsPybKK7agDYOMo9N-Z3J6ZXf3BOM79pFsFNcRjwA%40mail.gmail.com
pg_stat_reset_slru currently requires an input argument, either:
- NULL to reset the SLRU counters of everything.
- A specific value to reset a single SLRU cache.
This commit adds support for a new pattern: pg_stat_reset_slru without
any argument works the same way as pg_stat_reset_slru(NULL), relying on
a DEFAULT in the function definition to handle this case. This makes
the function more consistent with 23c8c0c8f4.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Atsushi Torikoshi
Discussion: https://postgr.es/m/CALj2ACW1VizYg01EeH_cA-7qA+4NzWVAoZ5Lw9_XYO1RRHAZbA@mail.gmail.com
This was done particularly for geometric data types.
Reported-by: Christoph Berg
Discussion: https://postgr.es/m/YGI8Leuk0WvmNWLr@msg.df7cb.de
Co-authored-by: Kyotaro Horiguchi
Backpatch-through: master
Default privileges are represented as NULL::aclitem[] in catalog ACL
columns, while revoking all privileges leaves an empty aclitem[].
These two cases used to produce identical output in psql meta-commands
like \dp. Using something like "\pset null '(default)'" as a
workaround for spotting the difference did not work, because null
values were always displayed as empty strings by describe.c's
meta-commands.
This patch improves that with two changes:
1. Print "(none)" for empty privileges so that the user is able to
distinguish them from default privileges, even without special
workarounds.
2. Remove the special handling of null values in describe.c,
so that "\pset null" is honored like everywhere else.
(This affects all output from these commands, not only ACLs.)
The privileges shown by \dconfig+ and \ddp as well as the column
privileges shown by \dp are not affected by change #1, because the
respective aclitem[] is reset to NULL or deleted from the catalog
instead of leaving an empty array.
Erik Wienhold and Laurenz Albe
Discussion: https://postgr.es/m/1966228777.127452.1694979110595@office.mailbox.org
Clarify that default privileges are not inherited and reorder
paragraphs. This is a follow up to a recent ALTER DEFAULT PRIVILEGES
doc patch.
Reported-by: Sanjay Minni
Diagnosed-by: AMpxBo=M35hcH1g4Vg=KRJ0-77FOJcvdrdiVF5KSOAdOG-LvKQ@mail.gmail.com
Co-authored-by: Laurenz Albe
Backpatch-through: 16
Rewrite array_in() and its subroutines so that we make only one
pass over the input text, rather than two. This requires
potentially re-pallocing the working arrays values[] and nulls[]
larger than our initial guess, but that cost will hopefully be made
up by avoiding duplicate parsing. In any case this coding seems
much clearer and more straightforward than what we had before.
This also fixes array_in() to reject non-rectangular input (that is,
different brace depths in different parts of the input) more reliably
than before, and to give a better error message when it does so.
This is analogous to the plpython and plperl fixes in 0553528e7 and
f47004add. Like those PLs, we now accept input such as '{{},{}}'
as a valid representation of an empty array, which we did not before.
Additionally, reject explicit array subscripts that are outside the
integer range (previously you just got whatever atoi() converted
them to), and make some other minor improvements in error reporting.
Although this is arguably a bug fix, it's also a behavioral change
that might trip somebody up, so no back-patch.
Tom Lane, Heikki Linnakangas, and Jian He. Thanks to Alexander Lakhin
for the initial report and for review/testing.
Discussion: https://postgr.es/m/2794005.1683042087@sss.pgh.pa.us
One of the examples on the SELECT page was missing a semicolon from
a listing which has the look and feel of being a psql session. This
adds the missing semicolon and also removes the newline between the
query and results to match the other examples nearby.
Backpatch to all supported branches to avoid backpatching issues on
this page.
Reported-by: tim.needham2@gmail.com
Discussion: https://postgr.es/m/169965004097.225187.12941375915673151540@wrigleys.postgresql.org
Backpatch-through: v12
Currently, pg_stat_reset_shared() can use an argument to specify the
target of statistics to reset, doing nothing for NULL as it is strict.
This patch adds to pg_stat_reset_shared() the possibility to reset all
the stats types already handled in this function rather than do nothing
if the argument value given is NULL or if nothing is specified
(proisstrict is switched to false). Like previously, SLRUs are not
included in what gets reset.
The idea to use NULL or no argument to control if all the shared stats
already covered by this function should be reset has been proposed by
Andres Freund.
Bump catalog version.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Michael Paquier, Bharath Rupireddy,
Matthias van de Meent
Discussion: https://postgr.es/m/4291a55137ddda77cf7cc5f46e846daf@oss.nttdata.com
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
This function implements the standard XMLTest function, which
converts text into xml text nodes. It uses the libxml2 function
xmlEncodeSpecialChars to escape predefined entities (&"<>), so
that those do not cause any conflict when concatenating the text
node output with existing xml documents.
This also adds a note in features.sgml about not supporting
XML(SEQUENCE). The SQL specification defines a RETURNING clause
to a set of XML functions, where RETURNING CONTENT or RETURNING
SEQUENCE can be defined. Since PostgreSQL doesn't support
XML(SEQUENCE) all of these functions operate with an
implicit RETURNING CONTENT.
Author: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Vik Fearing <vik@postgresfriends.org>
Discussion: https://postgr.es/m/86617a66-ec95-581f-8d54-08059cca8885@uni-muenster.de
In f13eb16485 I made a mistake leading to only man1 being installed. I will
report a bug suggesting that meson warn about mistakes of this sort.
Reported-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/ZUU5pRQO6ZUeBsi6@msg.df7cb.de
Backpatch: 16-, where the meson build was introduced
This text left one with the impression that an ON SELECT rule could
be attached to a plain table, which has not been true since commit
264c06820 (meaning the text was already misleading when written,
evidently by me in 96bd67f61). However, it didn't get really bad
until b23cd185f removed the convert-a-table-to-a-view logic, which
had made it possible for scripts that thought they were attaching
ON SELECTs to tables to still work.
Rewrite into a form that makes it clear that an ON SELECT rule
is better regarded as an implementation detail of a view.
Pre-v16, point out that adding ON SELECT to a table actually
converts it to a view.
Per bug #18178 from Joshua Uyehara. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18178-05534d7064044d2d@postgresql.org
Introduce unicode_version(), icu_unicode_version(), and
unicode_assigned().
The latter requires introducing a new lookup table for the Unicode
General Category, which is generated along with the other Unicode
lookup tables.
Discussion: https://postgr.es/m/CA+TgmoYzYR-yhU6k1XFCADeyj=Oyz2PkVsa3iKv+keM8wp-F_A@mail.gmail.com
Reviewed-by: Peter Eisentraut
This part of the documentation refers to exceptions as handled by
PL/pgSQL, and using the internal error code is confusing.
Per thinko in 66bde49d96.
Reported-by: Euler Taveira, Bruce Momjian
Discussion: https://postgr.es/m/ZUEUnLevXyW7DlCs@momjian.us
Backpatch-through: 11
The documentation includes a section describing how to define custom
LWLocks in extensions using the shmem hooks. However, it has never
mentioned the second, more flexible method based on the following
routines:
- LWLockNewTrancheId() to allocate a tranche ID.
- LWLockRegisterTranche() to associate a name to a tranche ID.
- LWLockInitialize() to initialize a LWLock with a tranche ID.
autoprewarm.c is the only example of extension in the tree that
allocates a LWLock this way.
This commit adds some documentation about all that. While on it, a
comment is added about the need of AddinShmemInitLock. This is required
especially for EXEC_BACKEND builds (aka Windows, normally), as per a
remark from Alexander, because backends can execute shmem initialization
paths concurrently.
Author: Aleksander Alekseev, Michael Paquier
Discussion: https://postgr.es/m/CAJ7c6TPKhFgL+54cdTD9yGpG4+sNcyJ+N1GvQqAxgWENAOa3VA@mail.gmail.com
Commit 536f410111 added links in the ALTER SUBSCRIPTION command page. The
link names used were slightly different from what other logical
replication commands like CREATE SUBSCRIPTION/PUBLICATION have but were
consistent with other docs. This patch changes the link names for all the
parameters to have 'params' word in the CREATE SUBSCRIPTION/PUBLICATION
pages.
Author: Peter Smith
Reviewed-by: Amit Kapila
Discussion: http://postgr.es/m/CAHut%2BPu2S4RdzYKR7H5_E7QYWyq5hB0hL4EFrYbP91Qso62jeg%40mail.gmail.com
Historically, the statistics of the checkpointer have been always part
of pg_stat_bgwriter. This commit removes a few columns from
pg_stat_bgwriter, and introduces pg_stat_checkpointer with equivalent,
renamed columns (plus a new one for the reset timestamp):
- checkpoints_timed -> num_timed
- checkpoints_req -> num_requested
- checkpoint_write_time -> write_time
- checkpoint_sync_time -> sync_time
- buffers_checkpoint -> buffers_written
The fields of PgStat_CheckpointerStats and its SQL functions are renamed
to match with the new field names, for consistency. Note that
background writer and checkpointer have been split into two different
processes in commits 806a2aee37 and bf405ba8e4. The pgstat
structures were already split, making this change straight-forward.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACVxX2ii=66RypXRweZe2EsBRiPMj0aHfRfHUeXJcC7kHg@mail.gmail.com
It is best not to mention the storage order, because that is
an implementation detail and has confused at least one user,
who assumed that the storage order is the order in which the
constituent ranges were written in SQL.
Since the sorting order is explained at the beginning of the
page, it should be sufficient to say that the ranges are
returned in ascending order.
Author: Laurenz Albe
Reviewed-by: Daniel Fredouille
Discussion: https://postgr.es/m/169627213477.3727338.17653654241633692682%40wrigleys.postgresql.org
Add the 'checkunique' argument to bt_index_check() and bt_index_parent_check().
When the flag is specified the procedures will check the unique constraint
violation for unique indexes. Only one heap entry for all equal keys in
the index should be visible (including posting list entries). Report an error
otherwise.
pg_amcheck called with the --checkunique option will do the same check for all
the indexes it checks.
Author: Anastasia Lubennikova <lubennikovaav@gmail.com>
Author: Pavel Borisov <pashkin.elfe@gmail.com>
Author: Maxim Orlov <orlovmg@gmail.com>
Reviewed-by: Mark Dilger <mark.dilger@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://postgr.es/m/CALT9ZEHRn5xAM5boga0qnrCmPV52bScEK2QnQ1HmUZDD301JEg%40mail.gmail.com
Two attributes related to checkpointer statistics are removed in this
commit:
- buffers_backend, that counts the number of buffers written directly by
a backend.
- buffers_backend_fsync, that counts the number of times a backend had
to do fsync() by its own.
These are actually not checkpointer properties but backend properties.
Also, pg_stat_io provides a more accurate and equivalent report of these
numbers, by tracking all the I/O stats related to backends, including
writes and fsyncs, so storing them in pg_stat_checkpointer was
redundant.
Thanks also to Robert Haas and Amit Kapila for their input.
Bump catalog version.
Author: Bharath Rupireddy
Reviewed-by: Bertrand Drouvot, Andres Freund
Discussion: https://postgr.es/m/20230210004604.mcszbscsqs3bc5nx@awork3.anarazel.de
While reading information from the old cluster, a list of logical
slots is fetched. At the later part of upgrading, pg_upgrade revisits the
list and restores slots by executing pg_create_logical_replication_slot()
on the new cluster. Migration of logical replication slots is only
supported when the old cluster is version 17.0 or later.
If the old node has invalid slots or slots with unconsumed WAL records,
the pg_upgrade fails. These checks are needed to prevent data loss.
The significant advantage of this commit is that it makes it easy to
continue logical replication even after upgrading the publisher node.
Previously, pg_upgrade allowed copying publications to a new node. With
this patch, adjusting the connection string to the new publisher will
cause the apply worker on the subscriber to connect to the new publisher
automatically. This enables seamless continuation of logical replication,
even after an upgrade.
Author: Hayato Kuroda, Hou Zhijie
Reviewed-by: Peter Smith, Bharath Rupireddy, Dilip Kumar, Vignesh C, Shlok Kyal
Discussion: http://postgr.es/m/TYAPR01MB58664C81887B3AF2EB6B16E3F5939@TYAPR01MB5866.jpnprd01.prod.outlook.com
Discussion: http://postgr.es/m/CAA4eK1+t7xYcfa0rEQw839=b2MzsfvYDPz3xbD+ZqOdP3zpKYg@mail.gmail.com
As far as I can see, ecpg has no notion of a "default" open
connection. You can do "CONNECT TO DEFAULT" but that just specifies
letting libpq use all its default connection parameters --- the
resulting connection is not special subsequently. In particular,
SET CONNECTION = DEFAULT and DISCONNECT DEFAULT simply act on a
connection named DEFAULT, if you've made one; they do not have
special lookup rules. But the documentation of these commands
makes it look like they do.
Simplest fix, I think, is just to remove the paras suggesting that
DEFAULT is special here.
Also, SET CONNECTION *does* have one special lookup rule, which
is that it recognizes CURRENT as an alias for the currently selected
connection. SET CONNECTION = CURRENT is a no-op, so it's pretty
useless, but nonetheless it does something different from selecting
a connection by name; so we'd better document it.
Per report from Sylvain Frandaz. Back-patch to all supported
versions.
Discussion: https://postgr.es/m/169824721149.1769274.1553568436817652238@wrigleys.postgresql.org
The Self Join Elimination (SJE) feature removes an inner join of a plain table
to itself in the query tree if is proved that the join can be replaced with
a scan without impacting the query result. Self join and inner relation are
replaced with the outer in query, equivalence classes, and planner info
structures. Also, inner restrictlist moves to the outer one with removing
duplicated clauses. Thus, this optimization reduces the length of the range
table list (this especially makes sense for partitioned relations), reduces
the number of restriction clauses === selectivity estimations, and potentially
can improve total planner prediction for the query.
The SJE proof is based on innerrel_is_unique machinery.
We can remove a self-join when for each outer row:
1. At most one inner row matches the join clause.
2. Each matched inner row must be (physically) the same row as the outer one.
In this patch we use the next approach to identify a self-join:
1. Collect all merge-joinable join quals which look like a.x = b.x
2. Add to the list above the baseretrictinfo of the inner table.
3. Check innerrel_is_unique() for the qual list. If it returns false, skip
this pair of joining tables.
4. Check uniqueness, proved by the baserestrictinfo clauses. To prove
the possibility of self-join elimination inner and outer clauses must have
an exact match.
The relation replacement procedure is not trivial and it is partly combined
with the one, used to remove useless left joins. Tests, covering this feature,
were added to join.sql. Some regression tests changed due to self-join removal
logic.
Discussion: https://postgr.es/m/flat/64486b0b-0404-e39e-322d-0801154901f3%40postgrespro.ru
Author: Andrey Lepikhov, Alexander Kuzmenkov
Reviewed-by: Tom Lane, Robert Haas, Andres Freund, Simon Riggs, Jonathan S. Katz
Reviewed-by: David Rowley, Thomas Munro, Konstantin Knizhnik, Heikki Linnakangas
Reviewed-by: Hywel Carver, Laurenz Albe, Ronan Dunklau, vignesh C, Zhihong Yu
Reviewed-by: Greg Stark, Jaime Casanova, Michał Kłeczek, Alena Rybakina
Reviewed-by: Alexander Korotkov
Rather than using the generic word "space" we might as well use "memory"
since that's precisely what we're dealing with here.
This was extracted from a larger patch around terminology changes where
the remaining hunks were rejected.
Author: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CABwTF4UHO_NtcsOL6_XZfnpKg_0XBFKa7B-7_x5zs3MRZm3-Tg@mail.gmail.com
Clearly spell out the limitations of aminsert()'s indexUnchanged hinting
mechanism in the index AM documentation.
Oversight in commit 9dc718bd, which added the "logically unchanged
index" hint (which is used to trigger bottom-up index deletion).
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-By: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAH2-WzmU_BQ=-H9L+bxTSMQBqHMjp1DSwGypvL0gKs+dTOfkKg@mail.gmail.com
Backpatch: 14-, where indexUnchanged hinting was introduced.
This doco said that use of => as an operator "is deprecated".
It's been fully disallowed since 865f14a2d back in 9.5, but
evidently that commit missed updating this statement.
Do so now.
Allow the COMMUTATOR, NEGATOR, MERGES, and HASHES attributes to be set
by ALTER OPERATOR. However, we don't allow COMMUTATOR/NEGATOR to be
changed once set, nor allow the MERGES/HASHES flags to be unset once
set. Changes like that might invalidate plans already made, and
dealing with the consequences seems like more trouble than it's worth.
The main use-case we foresee for this is to allow addition of missed
properties in extension update scripts, such as extending an existing
operator to support hashing. So only transitions from not-set to set
states seem very useful.
This patch also causes us to reject some incorrect cases that formerly
resulted in inconsistent catalog state, such as trying to set the
commutator of an operator to be some other operator that already has a
(different) commutator.
While at it, move the InvokeObjectPostCreateHook call for CREATE
OPERATOR to not occur until after we've fixed up commutator or negator
links as needed. The previous ordering could only be justified by
thinking of the OperatorUpd call as a kind of ALTER OPERATOR step;
but we don't call InvokeObjectPostAlterHook therein. It seems better
to let the hook see the final state of the operator object.
In the documentation, move the discussion of how to establish
commutator pairs from xoper.sgml to the CREATE OPERATOR ref page.
Tommy Pavlicek, reviewed and editorialized a bit by me
Discussion: https://postgr.es/m/CAEhP-W-vGVzf4udhR5M8Bdv88UYnPrhoSkj3ieR3QNrsGQoqdg@mail.gmail.com
This commit adds to pg_stat_statements the two new fields for local
buffers introduced by 295c36c0c1, adding the time spent to read and
write these blocks. These are similar to what is done for temp and
shared blocks. This information available only if track_io_timing is
enabled.
Like for 5a3423ad8e, no version bump is required in the module.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
There was no I/O timing statistics for counting read and write timings
on local blocks, contrary to the counterparts for temp and shared
blocks. This information is available when track_io_timing is enabled.
The output of EXPLAIN is updated to show this information. An update of
pg_stat_statements is planned next.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
These two counters, defined in BufferUsage to track respectively the
time spent while reading and writing blocks have historically only
tracked data related to shared buffers, when track_io_timing is enabled.
An upcoming patch to add specific counters for local buffers will take
advantage of this rename as it has come up that no data is currently
tracked for local buffers, and tracking local and shared buffers using
the same fields would be inconsistent with the treatment done for temp
buffers. Renaming the existing fields clarifies what the block type of
each stats field is.
pg_stat_statement is updated to reflect the rename. No extension
version bump is required as 5a3423ad8e has done one, affecting v17~.
Author: Nazir Bilal Yavuz
Reviewed-by: Robert Haas, Melanie Plageman
Discussion: https://postgr.es/m/CAN55FZ19Ss279mZuqGbuUNxka0iPbLgYuOQXqAKewrjNrp27VA@mail.gmail.com
Since its introduction, LogLogicalMessage() (via the SQL interface
pg_logical_emit_message()) has never included a call to XLogFlush(),
causing it to potentially lose messages on a crash when used in
non-transactional mode. This has come up to me as a problem while
playing with ideas to design a test suite for what has become
039_end_of_wal.pl introduced in bae868caf2 by Thomas Munro, because
there are no direct ways to force a WAL flush via SQL.
The default is false, to not flush messages and influence existing
use-cases where this function could be used. If set to true, the
message emitted is flushed before returning back to the caller, making
the message durable on crash. This new option has no effect when using
pg_logical_emit_message() in transactional mode, as the record's flush
is guaranteed by the WAL record generated by the transaction committed.
Two queries of test_decoding are tweaked to cover the new code path for
the flush.
Bump catalog version.
Author: Michael Paquier
Reviewed-by: Andres Freund, Amit Kapila, Fujii Masao, Tung Nguyen, Tomas
Vondra
Discussion: https://postgr.es/m/ZNsdThSe2qgsfs7R@paquier.xyz
First, we shouldn't recommend switching to single-user mode, because
that's terrible advice. Especially on newer versions where VACUUM
will enter emergency mode when nearing (M)XID exhaustion, it's
perfectly fine to just VACUUM in multi-user mode. Doing it that way
is less disruptive and avoids disabling the safeguards that prevent
actual wraparound, so recommend that instead.
Second, be more precise about what is going to happen (when we're
nearing the limits) or what is happening (when we actually hit them).
The database doesn't shut down, nor does it refuse all commands. It
refuses commands that assign whichever of XIDs and MXIDs are nearly
exhausted.
No back-patch. The existing hint that advises going to single-user
mode is sufficiently awful advice that removing it or changing it
might be justifiable even though we normally avoid changing
user-facing messages in back-branches, but I (rhaas) felt that it
was better to be more conservative and limit this fix to master
only. Aside from the usual risk of breaking translations, people
might be used to the existing message, or even have monitoring
scripts that look for it.
Alexander Alekseev, John Naylor, Robert Haas, reviewed at various
times by Peter Geoghegan, Hannu Krosing, and Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoZBg95FiR9wVQPAXpGPRkacSt2okVge+PKPPFppN7sfnQ@mail.gmail.com
The old documentation encourages entering single-user mode for no
reason, which is a bad plan in most cases. Instead, discourage users
from doing that, and explain the limited cases in which it may be
desirable.
The old documentation claims that running VACUUM as anyone but the
superuser can't possibly work, which is not really true, because it
might be that some other user has enough permissions to VACUUM all
the tables that matter. Weaken the language just a bit.
The old documentation claims that you can't run any commands
when near XID exhaustion, which is false because you can still
run commands that don't require an XID, like a SELECT without a
locking clause.
The old documentation doesn't clearly explain that it's a good idea
to get rid of prepared transactons, long-running transactions, and
replication slots that are preventing (M)XID horizon advancement.
Spell out the steps to do that.
Also, discourage the use of VACUUM FULL and VACUUM FREEZE in
this type of scenario.
Back-patch to v14. Much of this is good advice on all supported
versions, but before 60f1f09ff4
the chances of VACUUM failing in multi-user mode were much higher.
Alexander Alekseev, John Naylor, Robert Haas, reviewed at various
times by Peter Geoghegan, Hannu Krosing, and Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoYtsUDrzaHcmjFhLzTk1VEv29mO_u-MT+XWHrBJ_4nD8A@mail.gmail.com
This commit introduces trigger on login event, allowing to fire some actions
right on the user connection. This can be useful for logging or connection
check purposes as well as for some personalization of environment. Usage
details are described in the documentation included, but shortly usage is
the same as for other triggers: create function returning event_trigger and
then create event trigger on login event.
In order to prevent the connection time overhead when there are no triggers
the commit introduces pg_database.dathasloginevt flag, which indicates database
has active login triggers. This flag is set by CREATE/ALTER EVENT TRIGGER
command, and unset at connection time when no active triggers found.
Author: Konstantin Knizhnik, Mikhail Gribkov
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709%40postgrespro.ru
Reviewed-by: Pavel Stehule, Takayuki Tsunakawa, Greg Nancarrow, Ivan Panchenko
Reviewed-by: Daniel Gustafsson, Teodor Sigaev, Robert Haas, Andres Freund
Reviewed-by: Tom Lane, Andrey Sokolov, Zhihong Yu, Sergey Shinderuk
Reviewed-by: Gregory Stark, Nikita Malakhov, Ted Yu
When converting a timestamp to/from with/without time zone, the SQL
Standard specifies an AT LOCAL variant of AT TIME ZONE which uses the
session's time zone. This includes three system functions able to do
the work in the same way as the existing flavors for AT TIME ZONE,
except that these need to be marked as stable as they depend on the
session's TimeZone GUC.
Bump catalog version.
Author: Vik Fearing
Reviewed-by: Laurenz Albe, Cary Huang, Michael Paquier
Discussion: https://postgr.es/m/8e25dec4-5667-c1a5-6581-167d710c2182@postgresfriends.org
timezone(zone, timestamp) is already mentioned as an equivalent of the
two first patterns in the table describing the AT TIME ZONE variants,
but did not mention the third case about "time" and its equivalent as an
SQL function, so let's be consistent here.
Extracted from a larger patch by the same author.
Author: Vik Fearing
Discussion: https://postgr.es/m/8e25dec4-5667-c1a5-6581-167d710c2182@postgresfriends.org
This adds a new option called BGWORKER_BYPASS_ROLELOGINCHECK to the
flags available to BackgroundWorkerInitializeConnection() and
BackgroundWorkerInitializeConnectionByOid().
This gives the possibility to bgworkers to bypass the role login check,
making possible the use of a role that has no login rights while not
being a superuser. PostgresInit() gains a new flag called
INIT_PG_OVERRIDE_ROLE_LOGIN, taking advantage of the refactoring done in
4800a5dfb4.
Regression tests are added to worker_spi to check the behavior of this
new option with bgworkers.
Author: Bertrand Drouvot
Reviewed-by: Nathan Bossart, Michael Paquier, Bharath Rupireddy
Discussion: https://postgr.es/m/bcc36259-7850-4882-97ef-d6b905d2fc51@gmail.com
While these two built-in functions do exactly the same thing,
CURRENT_USER seems preferable to use in documentation examples.
It's easier to look up if the reader is unsure what it is.
Also, this puts these examples in sync with an adjacent example
that already used CURRENT_USER.
Per question from Kirk Parker.
Discussion: https://postgr.es/m/CANwZ8rmN_Eb0h0hoMRS8Feftaik0z89PxVsKg+cP+PctuOq=Qg@mail.gmail.com
Two custom wait events are added here:
- "DblinkConnect", when waiting to establish a connection to a remote
server.
- "DblinkGetConnect", when waiting to establish a connection to a remote
server but it could not be found in the list of already-opened ones.
Author: Masahiro Ikeda
Discussion: https://postgr.es/m/197bce267fa691a0ac62c86c4ab904c4@oss.nttdata.com
Three custom wait events are added here:
- "PostgresFdwCleanupResult", waiting while cleaning up PQgetResult() on
transaction abort.
- "PostgresFdwConnect", waiting to establish a connection to a remote
server.
- "PostgresFdwGetResult", waiting to receive a result from a remote
server.
Author: Masahiro Ikeda
Discussion: https://postgr.es/m/197bce267fa691a0ac62c86c4ab904c4@oss.nttdata.com
This naming is more consistent with all the other user-facing wait event
strings. Other in-core modules will use the same naming convention, so
let's be consistent here as well.
Extracted from a larger patch by the same author.
Author: Masahiro Ikeda
Discussion: https://postgr.es/m/197bce267fa691a0ac62c86c4ab904c4@oss.nttdata.com
Allow a line break in example output, as we have done elsewhere.
Overlength output was added in commit 1e68e43d3.
While here, adjust some shaky grammar in an adjacent note
(from a different commit, c9af05465).
Per buildfarm.
These options already exist, but you need to specify a column list for
them, which can be cumbersome. We already have the possibility of all
columns for FORCE QUOTE, so this is simply extending that facility to
FORCE_NULL and FORCE_NOT_NULL.
Author: Zhang Mingli
Reviewed-By: Richard Guo, Kyatoro Horiguchi, Michael Paquier.
Discussion: https://postgr.es/m/CACJufxEnVqzOFtqhexF2+AwOKFrV8zHOY3y=p+gPK6eB14pn_w@mail.gmail.com
Commit 7d3b7011b added a link to the statistics functions, which at the
time were anchored under the section for statistics views. aebe989477
added a separate section for statistics functions, but the link was not
updated to point to the new anchor. Fix by changing the xref.
Backpatch to all supported branches.
Author: Peter Smith <peter.b.smith@fujitsu.com>
Discussion: https://postgr.es/m/CAHut+Ptr0jKzNNtWnssLq+3jNhbyaBseqf6NPrWHk08mQFRoTg@mail.gmail.com
Backpatch-through: 11
For a reader unfamiliar with the postgres code it might take some
grepping to find where elevels are defined. This adds a reference
to elog.h in the text like how SQLSTATE errorcodes are referenced
to errcodes.h on the same page.
Author: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Discussion: https://postgr.es/m/CAMyC8qqp1UDA9zothnJ9CbUYByytwpALS3LkdZ6bs1w5kZw5Xg@mail.gmail.com
Thanks to commit 2a8b40e368, the logical replication worker type is
easily determined. The worker type could already be deduced via
other columns such as leader_pid and relid, but that is unnecessary
complexity for users.
Bumps catversion.
Author: Peter Smith
Reviewed-by: Michael Paquier, Maxim Orlov, Amit Kapila
Discussion: https://postgr.es/m/CAHut%2BPtmbSMfErSk0S7xxVdZJ9XVE3xVLhqBTmT91kf57BeKDQ%40mail.gmail.com
Without the added "relation" it's not immediately clear that the option
relates to the relation segment size and not e.g. the WAL segment size.
The option was added in d3b111e32.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/837536.1695348498@sss.pgh.pa.us
Backpatch: 16-
In order to troubleshoot misbehaving or buggy event triggers, the
documented advice is to enter single-user mode. In an attempt to
reduce the number of situations where single-user mode is required
(or even recommended) for non-extraordinary maintenance, this GUC
allows to temporarily suspend event triggers.
This was originally extracted from a larger patchset which aimed
at supporting event triggers on login events.
Reviewed-by: Ted Yu <yuzhihong@gmail.com>
Reviewed-by: Mikhail Gribkov <youzhick@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/9140106E-F9BF-4D85-8FC8-F2D3C094A6D9@yesql.se
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709@postgrespro.ru
The previous wording had a faint archaic whiff to it, and more
importantly used "catalogs" as a verb, which while cutely
self-referential seems likely to provoke confusion in this
particular context. Also consistently use "kind" not "type" to
refer to the different kinds of relations distinguished by relkind.
Per gripe from Martin Nash. Back-patch to supported versions.
Discussion: https://postgr.es/m/169518739902.3727338.4793815593763320945@wrigleys.postgresql.org
As physical replication work at the cluster level and not database
level, any dbname in the connection string is ignored. Proxies and
middleware used in connecting to the cluster might however need to
know the dbname in order to make the correct routing decision for
the connection.
With this the startup packet will include the dbname parameter.
Author: Jelte Fennema-Nio <me@jeltef.nl>
Reviewed-by: Tristen Raab <tristen.raab@highgo.ca>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/CAGECzQTw-dZkVT_RELRzfWRzY714-VaTjoBATYfZq93R8C-auA@mail.gmail.com
As reported in bug #18057, the extension unaccent removes in its rule
file whitespace characters that are intentionally specified when
building unaccent.rules from UnicodeData.txt, causing an incorrect
translation for some characters like numeric symbols. This is caused by
the fact that all whitespaces before and after the origin and target
characters are all discarded (this limitation is documented).
This commit makes possible the use of quotes around target characters,
so as whitespaces can be considered part of target characters. Some
target characters use a double quote, these require an extra double
quote.
The documentation is updated to show how to use quoted areas,
generate_unaccent_rules.py is updated to generate unaccent.rules and a
couple of tests are added for numeric symbols. While working on this
patch, I have implemented a fake rule file to test the parsing logic
implemented, which is not included here as it would just consume extra
cycles in the tests, and it requires the manipulation of an installation
tree to be able to work correctly.
As this requires a change of format in unaccent.rules, this cannot be
backpatched, unfortunately. The idea to use double quotes as escaped
characters comes from Tom Lane.
Reported-by: Martin Schlossarek
Author: Michael Paquier
Discussion: https://postgr.es/m/18057-62712cad01bd202c@postgresql.org
cursor_to_xmlschema() assumed that any Portal must have a tupDesc,
which is not so. Add a defensive check.
It's plausible that this mistake occurred because of the rather
poorly chosen name of the lookup function SPI_cursor_find(),
which in such cases is returning something that isn't very much
like a cursor. Add some documentation to try to forestall future
errors of the same ilk.
Report and patch by Boyu Yang (docs changes by me). Back-patch
to all supported branches.
Discussion: https://postgr.es/m/dd343010-c637-434c-a8cb-418f53bda3b8.yangboyu.yby@alibaba-inc.com
The documentation is pretty light on how to set column options
on foreign tables, and the file_fdw docs refer to COPY when
documenting force_null even though it's not used in the same
way. Add a small example to describe how to use it.
Reported-by: Boshomi Phenix <boshomi@gmail.com>
Discussion: https://postgr.es/m/CAJVkCUparn4_Oarernm=U6LWVsTkecKcALHtwGr5M3qJRj_czw@mail.gmail.com
generation_counter includes time spent on both JIT:ing expressions
and tuple deforming which are configured independently via options
jit_expressions and jit_tuple_deforming. As they are combined in
the same counter it's not apparent what fraction of time the tuple
deforming takes.
This adds deform_counter dedicated to tuple deforming, which allows
seeing more directly the influence jit_tuple_deforming is having on
the query. The counter is exposed in EXPLAIN and pg_stat_statements
bumpin pg_stat_statements to 1.11.
Author: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20220612091253.eegstkufdsu4kfls@erthalion.local
Extend the PG_TEST_EXTRA documentation to mention resource intensive
tests as well. The previous wording only mentioned special software
and security in the main paragraph, with resource usage listed on one
of the tests in the list.
Backpatch to v15 where f47ed79cc8 added wal_consistenct_checking as
a PG_TEST_EXTRA target.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ0OthTuBdiNkaX2BvxuHdK4Y1MVEb8_uEuD1yHMPmT9Og@mail.gmail.com
Backpatch-through: 15
This commit allows specifying a --sync-method in several frontend
utilities that must synchronize many files to disk (initdb,
pg_basebackup, pg_checksums, pg_dump, pg_rewind, and pg_upgrade).
On Linux, users can specify "syncfs" to synchronize the relevant
file systems instead of calling fsync() for every single file. In
many cases, using syncfs() is much faster.
As with recovery_init_sync_method, this new option comes with some
caveats. The descriptions of these caveats have been moved to a
new appendix section in the documentation.
Co-authored-by: Justin Pryzby
Reviewed-by: Michael Paquier, Thomas Munro, Robert Haas, Justin Pryzby
Discussion: https://postgr.es/m/20210930004340.GM831%40telsasoft.com
Previously when client was aborted due to some error during
benchmarking, other clients continued their run until certain number
of transactions specified -t was reached or the time specified by -T
was expired. At the end, the results are printed with caution: "Run
was aborted; the above results are incomplete" shows.
New option "--exit-on-abort" allows pgbench to exit immediately in
this case so that users could quickly fix the cause of the failure and
try again another round of benchmarking.
Author: Yugo Nagata
Reviewed-by: Fabien COELHO, Tatsuo Ishii
Discussion: https://postgr.es/m/flat/20230804130325.df32e60879c38c92bca64207%40sraoss.co.jp
The logical_replication_mode GUC is intended for testing and debugging
purposes, but its current name may be misleading and encourage users to make
unnecessary changes.
To avoid confusion, renaming the GUC to a less misleading name
debug_logical_replication_streaming that casual users are less likely to mistakenly
assume needs to be modified in a regular logical replication setup.
Author: Hou Zhijie <houzj.fnst@cn.fujitsu.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/d672d774-c44b-6fec-f993-793e744f169a%40eisentraut.org
When running a repeat query with \watch in psql, it can be
helpful to be able to stop the watch process when the query
no longer returns the expected amount of rows. An example
would be to watch for the presence of a certain event in
pg_stat_activity and stopping when the event is no longer
present, or to watch an index creation and stop when the
index is created.
This adds a min_rows=MIN parameter to \watch which can be
set to a non-negative integer, and the watch query will
stop executing when it returns less than MIN rows.
Author: Greg Sabino Mullane <htamfids@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAKAnmmKStATuddYxP71L+p0DHtp9Rvjze3XRoy0Dyw67VQ45UA@mail.gmail.com
We now create contype='n' pg_constraint rows for not-null constraints.
We propagate these constraints to other tables during operations such as
adding inheritance relationships, creating and attaching partitions and
creating tables LIKE other tables. We also spawn not-null constraints
for inheritance child tables when their parents have primary keys.
These related constraints mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations: for example, as opposed to CHECK constraints, we don't
match not-null ones by name when descending a hierarchy to alter it,
instead matching by column name that they apply to. This means we don't
require the constraint names to be identical across a hierarchy.
For now, we omit them for system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
psql shows these constraints in \d+.
pg_dump requires some ad-hoc hacks, particularly when dumping a primary
key. We now create one "throwaway" not-null constraint for each column
in the PK together with the CREATE TABLE command, and once the PK is
created, all those throwaway constraints are removed. This avoids
having to check each tuple for nullness when the dump restores the
primary key creation.
pg_upgrading from an older release requires a somewhat brittle procedure
to create a constraint state that matches what would be created if the
database were being created fresh in Postgres 17. I have tested all the
scenarios I could think of, and it works correctly as far as I can tell,
but I could have neglected weird cases.
This patch has been very long in the making. The first patch was
written by Bernd Helmle in 2010 to add a new pg_constraint.contype value
('n'), which I (Álvaro) then hijacked in 2011 and 2012, until that one
was killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again. During Postgres 16 this had
already been introduced by commit e056c557ae, but there were some
problems mainly with the pg_upgrade procedure that couldn't be fixed in
reasonable time, so it was reverted.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring an additional pg_attribute column
to track the OID of the not-null constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
This commit introduces functions for converting numbers to their
equivalent binary and octal representations. Also, the base
conversion code for these functions and to_hex() has been moved to
a common helper function.
Co-authored-by: Eric Radman
Reviewed-by: Ian Barwick, Dag Lem, Vignesh C, Tom Lane, Peter Eisentraut, Kirk Wolak, Vik Fearing, John Naylor, Dean Rasheed
Discussion: https://postgr.es/m/Y6IyTQQ/TsD5wnsH%40vm3.eradman.com
The list of external language drivers and procedural languages was
never complete or exhaustive, and rather than attempting to manage
it the content has migrated to the wiki. This replaces the tables
altogether with links to the wiki as we regularly get requests for
adding various projects, which we reject without any clear policy
for why or how the content should be managed.
The threads linked to below are the most recent discussions about
this, the archives contain many more.
Backpatch to all supported branches since the list on the wiki
applies to all branches.
Author: Jonathan Katz <jkatz@postgresql.org>
Discussion: https://postgr.es/m/169165415312.635.10247434927885764880@wrigleys.postgresql.org
Discussion: https://postgr.es/m/169177958824.635.11087800083040275266@wrigleys.postgresql.org
Backpatch-through: v11
This new view, wrapped around a SRF, shows some information known about
wait events, as of:
- Name.
- Type (Activity, I/O, Extension, etc.).
- Description.
All the information retrieved comes from wait_event_names.txt, and the
description is the same as the documentation with filters applied to
remove any XML markups. This view is useful when joined with
pg_stat_activity to get the description of a wait event reported.
Custom wait events for extensions are included in the view.
Original idea by Yves Colin.
Author: Bertrand Drouvot
Reviewed-by: Kyotaro Horiguchi, Masahiro Ikeda, Tom Lane, Michael
Paquier
Discussion: https://postgr.es/m/0e2ae164-dc89-03c3-cf7f-de86378053ac@gmail.com
The source code comment already said that the presence of the field
element_types.domain_default might be a bug in the standard, since it
never made sense there. Indeed, the field is gone in newer versions
of the standard. So just remove it.
This was disabled in commit 6f80a8d9c due to the lack of support for
handling of pseudoconstant quals assigned to replaced joins in
createplan.c. To re-allow it, this patch adds the support by 1)
modifying the ForeignPath and CustomPath structs so that if they
represent foreign and custom scans replacing a join with a scan, they
store the list of RestrictInfo nodes to apply to the join, as in
JoinPaths, and by 2) modifying create_scan_plan() in createplan.c so
that it uses that list in that case, instead of the baserestrictinfo
list, to get pseudoconstant quals assigned to the join, as mentioned in
the commit message for that commit.
Important item for the release notes: this is non-backwards-compatible
since it modifies the ForeignPath and CustomPath structs, as mentioned
above, and changes the argument lists for FDW helper functions
create_foreignscan_path(), create_foreign_join_path(), and
create_foreign_upper_path().
Richard Guo, with some additional changes by me, reviewed by Nishant
Sharma, Suraj Kharage, and Richard Guo.
Discussion: https://postgr.es/m/CADrsxdbcN1vejBaf8a%2BQhrZY5PXL-04mCd4GDu6qm6FigDZd6Q%40mail.gmail.com
Currently, the names of the custom wait event must be registered for
each backend, requiring all these to link to the shared memory area of
an extension, even if these are not loaded with
shared_preload_libraries.
This patch relaxes the constraints related to this infrastructure by
storing the wait events and their names in two dynamic hash tables in
shared memory. This has the advantage to simplify the registration of
custom wait events to a single routine call that returns an event ID
ready for consumption:
uint32 WaitEventExtensionNew(const char *wait_event_name);
The caller of this routine can then cache locally the ID returned, to be
used for pgstat_report_wait_start(), WaitLatch() or a similar routine.
The implementation uses two hash tables: one with a key based on the
event name to avoid duplicates and a second using the event ID as key
for event lookups, like on pg_stat_activity. These tables can hold a
minimum of 16 entries, and a maximum of 128 entries, which should be plenty
enough.
The code changes done in worker_spi show how things are simplified (most
of the code removed in this commit comes from there):
- worker_spi_init() is gone.
- No more shared memory hooks required (size requested and
initialization).
- The custom wait event ID is cached in the process that needs to set
it, with one single call to WaitEventExtensionNew() to retrieve it.
Per suggestion from Andres Freund.
Author: Masahiro Ikeda, with a few tweaks from me.
Discussion: https://postgr.es/m/20230801032349.aaiuvhtrcvvcwzcx@awork3.anarazel.de
Two backend routines are added to allow extension to allocate and define
custom wait events, all of these being allocated in the type
"Extension":
* WaitEventExtensionNew(), that allocates a wait event ID computed from
a counter in shared memory.
* WaitEventExtensionRegisterName(), to associate a custom string to the
wait event ID allocated.
Note that this includes an example of how to use this new facility in
worker_spi with tests in TAP for various scenarios, and some
documentation about how to use them.
Any code in the tree that currently uses WAIT_EVENT_EXTENSION could
switch to this new facility to define custom wait events. This is left
as work for future patches.
Author: Masahiro Ikeda
Reviewed-by: Andres Freund, Michael Paquier, Tristan Partin, Bharath
Rupireddy
Discussion: https://postgr.es/m/b9f5411acda0cf15c8fbb767702ff43e@oss.nttdata.com
Commits 83dec5a712 and ff402ae11b taught vacuumdb to reuse
passwords instead of prompting repeatedly. However, the docs still
warn about repeated prompts, and this improvement was not applied
to clusterdb and reindexdb. This commit allows clusterdb and
reindexdb to reuse passwords just like vacuumdb does, and it
expunges the aforementioned warnings from the docs.
Reviewed-by: Gurjeet Singh, Zhang Mingli
Discussion: https://postgr.es/m/20230628045741.GA1813397%40nathanxps13
This Patch introduces three SQL standard JSON functions:
JSON()
JSON_SCALAR()
JSON_SERIALIZE()
JSON() produces json values from text, bytea, json or jsonb values,
and has facilitites for handling duplicate keys.
JSON_SCALAR() produces a json value from any scalar sql value,
including json and jsonb.
JSON_SERIALIZE() produces text or bytea from input which containis
or represents json or jsonb;
For the most part these functions don't add any significant new
capabilities, but they will be of use to users wanting standard
compliant JSON handling.
Catversion bumped as this changes ruleutils.c.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby, Álvaro Herrera,
Peter Eisentraut
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
Discussion: https://postgr.es/m/CA+HiwqE4XTdfb1nW=Ojoy_tQSRhYt-q_kb6i5d4xcKyrLC1Nbg@mail.gmail.com
This commit switches the client-side data generation from INSERT queries
to COPY for the two tables pgbench_branches and pgbench_tellers.
pgbench_accounts was already using COPY.
COPY is a better interface for bulk loading or high latency connections
(this point can be countered with the option for server-side data
generation, still client-side is the default), and measurements have
proved that using it for these two other tables can lead to improvements
during initialization. I did not notice slowdowns at large scale
numbers on a local setup, either, most of the work happening for the
accounts table.
Previously COPY was only used for the pgbench_accounts table because the
amount of data was much larger than the two other tables. The code is
refactored so as all three tables use the same code path to execute the
COPY queries, with a callback to build data rows.
Author: Tristan Partin
Discussion: https://postgr.es/m/CSTU5P82ONZ1.19XFUGHMXHBRY@c3po
This adds the X509 attributes notBefore and notAfter to sslinfo
as well as pg_stat_ssl to allow verifying and identifying the
validity period of the current client certificate.
Author: Cary Huang <cary.huang@highgo.ca>
Discussion: https://postgr.es/m/182b8565486.10af1a86f158715.2387262617218380588@highgo.ca
b5913f6120 added a parenthesized syntax for CLUSTER, but it
requires specifying a table name. This is unlike commands such as
VACUUM and ANALYZE, which do not require specifying a table in the
parenthesized syntax. This change resolves this inconsistency.
This is preparatory work for a follow-up commit that will move the
unparenthesized syntax to the "Compatibility" section of the
CLUSTER documentation.
Reviewed-by: Melanie Plageman, Michael Paquier
Discussion: https://postgr.es/m/CAAKRu_bc5uHieG1976kGqJKxyWtyQt9yvktjsVX%2Bi7NOigDjOA%40mail.gmail.com
This change moves the unparenthesized syntax for CLUSTER to the end
of the ClusterStmt rules in preparation for a follow-up commit that
will move this syntax to the "Compatibility" section of the CLUSTER
documentation. The documentation for the CLUSTER syntaxes has also
been consolidated.
Suggested-by: Melanie Plageman
Discussion https://postgr.es/m/CAAKRu_bc5uHieG1976kGqJKxyWtyQt9yvktjsVX%2Bi7NOigDjOA%40mail.gmail.com
With the addition of INHERIT and SET options for role grants,
the historical display of role memberships in \du/\dg is woefully
inadequate. Besides those options, there are pre-existing
shortcomings that you can't see the ADMIN option nor the grantor.
To fix this, remove the "Member of" column from \du/\dg altogether
(making that output usefully narrower), and invent a new meta-command
"\drg" that is specifically for displaying role memberships. It
shows one row for each role granted to the selected role(s), with
the grant options and grantor.
We would not normally back-patch such a feature addition post
feature freeze, but in this case the change is mainly driven by
v16 changes in the server, so it seems appropriate to include it
in v16.
Pavel Luzanov, with bikeshedding and review from a lot of people,
but particularly David Johnston
Discussion: https://postgr.es/m/b9be2d0e-a9bc-0a30-492f-a4f68e4f7740@postgrespro.ru
IN and NOT IN work fine on records and arrays, so just say that
they accept "expressions" not "scalar expressions". I think that
that phrasing was meant to say that they don't work on set-returning
expressions, but that's not the common meaning of "scalar".
Revise the description of row-constructor comparisons to make it
perhaps a bit less confusing. (This partially reverts some
dubious wording changes made by commit f56651519.)
Per gripe from Ilya Nenashev. Back-patch to supported branches.
In HEAD and v16, also drop a NOTE about pre-8.2 behavior, which
is hopefully no longer of interest to anybody.
Discussion: https://postgr.es/m/168968062460.632.14303906825812821399@wrigleys.postgresql.org
By default, pg_archivecleanup does not remove backup history files.
These are just few bytes useful for debugging purposes, still keeping
them around can bloat an archive path history files mixed with the WAL
segments if the path has a long history.
This patch adds a new option to control if backup history files are
removed, depending on the oldest segment name to keep around.
While on it, the TAP tests are refactored so as these are now able to
handle lists of files. Each file has a flag to track if it should still
exist or not depending on the oldest segment defined with the command
run.
Author: Atsushi Torikoshi
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/d660ef741ce3d82f3b4283f1cafd576c@oss.nttdata.com
The "count" argument of SPI_exec() only limits execution when
the query is actually returning rows. This was not the case
before PG 9.0, so this example was correct when written; but
we missed updating it in commit 2ddc600f8. Extend the example
to show the behavior both with and without RETURNING.
While here, improve the commentary and markup for the rest
of the example.
David G. Johnston and Tom Lane, per report from Curt Kolovson.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CANhYJV6HWtgz_qjx_APfK0PAgLUzY-2vjLuj7i_o=TZF1LAQew@mail.gmail.com
Presently, the privilege check for SET SESSION AUTHORIZATION checks
whether the original authenticated role was a superuser at
connection start time. Even if the role loses the superuser
attribute, its existing sessions are permitted to change session
authorization to any role.
This commit modifies this privilege check to verify the original
authenticated role currently has superuser. In the event that the
authenticated role loses superuser within a session authorization
change, the authorization change will remain in effect, which means
the user can still take advantage of the target role's privileges.
However, [RE]SET SESSION AUTHORIZATION will only permit switching
to the original authenticated role.
Author: Joseph Koshakow
Discussion: https://postgr.es/m/CAAvxfHc-HHzONQ2oXdvhFF9ayRnidPwK%2BfVBhRzaBWYYLVQL-g%40mail.gmail.com
Commit 89e46da5e5 allowed using BTREE indexes that are neither
PRIMARY KEY nor REPLICA IDENTITY on the subscriber during apply of
update/delete. This patch extends that functionality to also allow HASH
indexes.
We explored supporting other index access methods as well but they don't
have a fixed strategy for equality operation which is required by the
current infrastructure in logical replication to scan the indexes.
Author: Kuroda Hayato
Reviewed-by: Peter Smith, Onder Kalaci, Amit Kapila
Discussion: https://postgr.es/m/TYAPR01MB58669D7414E59664E17A5827F522A@TYAPR01MB5866.jpnprd01.prod.outlook.com
The "fsync" level already flushes drive write caches on Windows (as does
"fdatasync"), so it only confuses matters to have an apparently higher
level that isn't actually different at all.
That leaves "fsync_writethrough" only for macOS, where it actually does
something different.
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://postgr.es/m/CA%2BhUKGJ2CG2SouPv2mca2WCTOJxYumvBARRcKPraFMB6GSEMcA%40mail.gmail.com
Until now, when DROP DATABASE got interrupted in the wrong moment, the removal
of the pg_database row would also roll back, even though some irreversible
steps have already been taken. E.g. DropDatabaseBuffers() might have thrown
out dirty buffers, or files could have been unlinked. But we continued to
allow connections to such a corrupted database.
To fix this, mark databases invalid with an in-place update, just before
starting to perform irreversible steps. As we can't add a new column in the
back branches, we use pg_database.datconnlimit = -2 for this purpose.
An invalid database cannot be connected to anymore, but can still be
dropped.
Unfortunately we can't easily add output to psql's \l to indicate that some
database is invalid, it doesn't fit in any of the existing columns.
Add tests verifying that a interrupted DROP DATABASE is handled correctly in
the backend and in various tools.
Reported-by: Evgeny Morozov <postgresql3@realityexists.net>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20230509004637.cgvmfwrbht7xm7p6@awork3.anarazel.de
Discussion: https://postgr.es/m/20230314174521.74jl6ffqsee5mtug@awork3.anarazel.de
Backpatch: 11-, bug present in all supported versions
Commit 89e46da5e allowed REPLICA IDENTITY FULL tables to use an index
on the subscriber during apply of update/delete. This commit clarifies
in the documentation that the leftmost field of candidate indexes must
be a column (not an expression) that references the published relation
column.
The source code comments are also updated accordingly.
Reviewed-by: Peter Smith, Amit Kapila
Discussion: https://postgr.es/m/CAD21AoDJjffEvUFKXT27Q5U8-UU9JHv4rrJ9Ke8Zkc5UPWHLvA@mail.gmail.com
Backpatch-through: 16
The errhint example wasn't using the mandated style for errhint
which was needlessly confusing. Fix by rewriting it using the
mandated style.
Reported-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Discussion: https://postgr.es/m/F02F4B4F-7B7E-406A-B25A-FF2AA300AB9A@yesql.se
Previously we only allowed unique B-tree constraints on partitions
(and only if the constraint included all the partition keys). But we
could allow exclusion constraints with the same restriction. We also
require that those columns be compared for equality, not something
like &&.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Ronan Dunklau <ronan.dunklau@aiven.io>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/ec8b1d9b-502e-d1f8-e909-1bf9dffe6fa5@illuminatedcomputing.com
All supported computers have either POSIX or Windows threads, and we no
longer have any automated testing of --disable-thread-safety. We define
a vestigial ENABLE_THREAD_SAFETY macro to 1 in ecpg_config.h in case it
is useful, but we no longer test it anywhere in PostgreSQL code, and
associated dead code paths are removed.
The Meson and perl-based Windows build scripts never had an equivalent
build option.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
This commit adds two columns: indexes_total and indexes_processed, to
pg_stat_progress_vacuum system view to show the index vacuum
progress. These numbers are reported in the "vacuuming indexes" and
"cleaning up indexes" phases.
This uses the new parallel message type for progress reporting added
by be06506e7.
Bump catversion because this changes the definition of
pg_stat_progress_vacuum.
Author: Sami Imseih
Reviewed by: Masahiko Sawada, Michael Paquier, Nathan Bossart, Andres Freund
Discussion: https://www.postgresql.org/message-id/flat/5478DFCD-2333-401A-B2F0-0D186AB09228@amazon.com
The DEFAULT parameter seems most similar to the NULL parameter, so
move it next to it, instead of having it at the end of the parameter
list because it was the last one added.
Comments in src/backend/libpq/auth.c say: (after successfully finding
the final DN to check the user-supplied password against)
/* Unbind and disconnect from the LDAP server */
and later
/*
* Need to re-initialize the LDAP connection, so that we can bind to
* it with a different username.
*/
But the protocol actually permits multiple subsequent authentications
("binds") over a single connection.
So, it seems like the whole connection re-initialization thing was
just a confusion and can be safely removed, thus saving quite a few
network round-trips, especially for the case of ldaps/starttls.
Author: Anatoly Zaretsky <anatoly.zaretsky@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALbq6kmJ-1+58df4B51ctPfTOSyPbY8Qi2=ct8oR=i4TamkUoQ@mail.gmail.com
This is useful to show the allocation state of huge pages when setting
up a server with "huge_pages = try", where allocating huge pages would
be attempted but the server would continue its startup sequence even if
the allocation fails. The effective status of huge pages is not easily
visible without OS-level tools (or for instance, a lookup at
/proc/N/smaps), and the environments where Postgres runs may not
authorize that. Like the other GUCs related to huge pages, this works
for Linux and Windows.
This GUC can report as values:
- "on", if huge pages were allocated.
- "off", if huge pages were not allocated.
- "unknown", a special state that could only be seen when using for
example postgres -C because it is only possible to know if the shared
memory allocation worked after we can check for the GUC values, even if
checking a runtime-computed GUC. This value should never be seen when
querying for the GUC on a running server. An assertion is added to
check that.
The discussion has also turned around having a new function to grab this
status, but this would have required more tricks for -DEXEC_BACKEND,
something that GUCs already handle.
Noriyoshi Shinoda has initiated the thread that has led to the result of
this commit.
Author: Justin Pryzby
Reviewed-by: Nathan Bossart, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/TU4PR8401MB1152EBB0D271F827E2E37A01EECC9@TU4PR8401MB1152.NAMPRD84.PROD.OUTLOOK.COM
The documentation and the code is generated automatically from a new
file called wait_event_names.txt, formatted in sections dedicated to
each wait event class (Timeout, Lock, IO, etc.) with three tab-separated
fields:
- C symbol in enums
- Format in the system views
- Description in the docs
Using this approach has several advantages, as we have proved to be
rather bad in maintaining this area of the tree across the years:
- The order of each item in the documentation and the code, which should
be alphabetical, has become incorrect multiple times, and the script
generating the code and documentation has a few rules to enforce that,
making the maintenance a no-brainer.
- Some wait events were added to the code, but not documented, so this
cannot be missed now.
- The order of the tables for each wait event class is enforced in the
documentation (the input .txt file does so as well for clarity, though
this is not mandatory).
- Less code, shaving 1.2k lines from the tree, with 1/3 of the savings
coming from the code, the rest from the documentation.
The wait event types "Lock" and "LWLock" still have their own code path
for their code, hence only the documentation is created for them. These
classes are listed with a special marker called WAIT_EVENT_DOCONLY in
the input file.
Adding a new wait event now requires only an update of
wait_event_names.txt, with "Lock" and "LWLock" treated as exceptions.
This commit has been tested with configure/Makefile, the CI and VPATH
build. clean, distclean and maintainer-clean were working fine.
Author: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/77a86b3a-c4a8-5f5d-69b9-d70bbf2e9b98@gmail.com
The following routines are added to libpq:
PGresult *PQclosePrepared(PGconn *conn, const char *stmt);
PGresult *PQclosePortal(PGconn *conn, const char *portal);
int PQsendClosePrepared(PGconn *conn, const char *stmt);
int PQsendClosePortal(PGconn *conn, const char *portal);
The "send" routines are non-blocking versions of the two others.
Close messages are part of the protocol but they did not have a libpq
implementation. And, having these routines is for instance useful with
connection poolers as these can detect more easily Close messages
than DEALLOCATE queries.
The implementation takes advantage of what the Describe routines rely on
for portals and statements. Some regression tests are added in
libpq_pipeline, for the four new routines, by closing portals and
statements created already by the tests.
Author: Jelte Fennema
Reviewed-by: Jian He, Michael Paquier
Discussion: https://postgr.es/m/CAGECzQTb4xFAopAVokudB+L62Kt44mNAL4Z9zZ7UTrs1TRFvWA@mail.gmail.com
This commit increases the size of the bgw_library_name member of
the BackgroundWorker struct from BGW_MAXLEN (96) bytes to MAXPGPATH
(default of 1024) bytes so that it can store longer file names
(e.g., absolute paths).
Author: Yurii Rashkovskii
Reviewed-by: Daniel Gustafsson, Aleksander Alekseev
Discussion: https://postgr.es/m/CA%2BRLCQyjFV5Y8tG5QgUb6gjteL4S3p%2B1gcyqWTqigyM93WZ9Pg%40mail.gmail.com
Here are some notes about this change:
- As X509_get_signature_nid() should always exist (OpenSSL and
LibreSSL), hence HAVE_X509_GET_SIGNATURE_NID is now gone.
- OPENSSL_API_COMPAT is bumped to 0x10002000L.
- One comment related to 1.0.1e introduced by 74242c2 is removed.
Upstream OpenSSL still provides long-term support for 1.0.2 in a closed
fashion, so removing it is out of scope for a few years, at least.
Reviewed-by: Jacob Champion, Daniel Gustafsson
Discussion: https://postgr.es/m/ZG3JNursG69dz1lr@paquier.xyz
When set, this environment variable was only effective for data
directories but not for all the other temporary files created by
PostgreSQL::Test::Utils. Keeping the temporary files after a successful
run can be useful for debugging purposes.
The documentation is updated to reflect the new behavior, with contents
available in doc/ since v16 and in src/test/perl/README since v15.
Author: Jacob Champion
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CAAWbhmgHtDH1SGZ+Fw05CsXtE0mzTmjbuUxLB9mY9iPKgM6cUw@mail.gmail.com
Discussion: https://postgr.es/m/YyPd9unV14SX2bLF@paquier.xyz
Backpatch-through: 11
This patch is a preliminary refactoring for an upcoming patch aimed at
adding new options to this tool, and using long options for these is
more user-friendly. The existing short options gain long flavors, as
of:
* -d/--debug
* -n/--dry-run
* -x/--strip-extension
Author: Atsushi Torikoshi
Reviewed-by: Fujii Masao, Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/d660ef741ce3d82f3b4283f1cafd576c@oss.nttdata.com
Not including the timeline IDs to the file names generated by pg_waldump
for the individual blocks saved could cause some of these files to be
overwritten when scanning segments across multiple timelines. Having
this information is also as much useful as the LSNs, to be able to know
from exactly which WAL segment a block is comes from.
While on it, this fixes a few comments in the tests, where the format of
the file was not described as matching with the reality.
Reported-by: Fujii Masao
Reviewed-by: Kyotaro Horiguchi, David Christensen
Discussion: https://postgr.es/m/ZJp921+nITFnvBVS@paquier.xyz
The documentation of the required privileges for maintenance
commands (i.e., VACUUM, ANALYZE, CLUSTER, LOCK TABLE, REFRESH
MATERIALIZED VIEW, and REINDEX) is redundant, inaccurate, and
difficult to read. This commit fixes and simplifies this
documentation by removing references to ownership, superuser, and
the pg_maintain role. In addition, this removes notes about
database-wide VACUUM and ANALYZE, clarifies matters for REINDEX on
partitioned indexes and tables, and strengthens the description of
the pg_maintain role.
Reviewed-by: Michael Paquier, Jeff Davis
Discussion: https://postgr.es/m/20230615041044.GA736001%40nathanxps13
ff9618e82a introduced has_partition_ancestor_privs(), which is used
to check whether a user has MAINTAIN on any partition ancestors.
This involves syscache lookups, and presently this function does
not take any relation locks, so it is likely subject to the same
kind of cache lookup failures that were fixed by 19de0ab23c.
To fix this problem, this commit partially reverts ff9618e82a.
Specifically, it removes the partition-related changes, including
the has_partition_ancestor_privs() function mentioned above. This
means that MAINTAIN on a partitioned table is no longer sufficient
to perform maintenance commands on its partitions. This is more
like how privileges for maintenance commands work on supported
versions. Privileges are checked for each partition, so a command
that flows down to all partitions might refuse to process them
(e.g., if the current user doesn't have MAINTAIN on the partition).
In passing, adjust a few related comments and error messages, and
add a test for the privilege checks for CLUSTER on a partitioned
table.
Reviewed-by: Michael Paquier, Jeff Davis
Discussion: https://postgr.es/m/20230613211246.GA219055%40nathanxps13
By default, triggers and rules do not fire on a logical replication
subscriber based on the "session_replication_role" GUC being set to
"replica". However, the docs in the logical replication section assumed
that the reader understood how this GUC worked. This modifies the docs to
be more explicit and links back to the GUC itself.
Author: Jonathan Katz, Peter Smith
Reviewed-by: Vignesh C, Euler Taveira
Backpatch-through: 11
Discussion: https://postgr.es/m/5bb2c9a2-499f-e1a2-6e33-5ce96b35cc4a@postgresql.org
Statistics defined by the CREATE STATISTICS command are only used to
assist with the selectivity estimations of base relations, never for
joins. Here we mention this fact in the notes section of the CREATE
STATISTICS command.
Discussion: https://postgr.es/m/CAApHDvrMuVgDOrmg_EtFDZ=AOovq6EsJNnHH1ddyZ8EqL4yzMw@mail.gmail.com
Backpatch-through: 11
The existing errhint message and docs were missing the fact that we can't
disassociate from the slot unless the subscription is disabled.
Author: Robert Sjöblom, Peter Smith
Reviewed-by: Peter Eisentraut, Amit Kapila
Backpatch-through: 11
Discussion: https://postgr.es/m/807bdf85-61ea-88e2-5712-6d9fcd4eabff@fortnox.se
For CREATE DATABASE, make LOCALE parameter apply regardless of the
provider used. Also affects initdb and createdb --locale arguments.
Previously, LOCALE (and --locale) only affected the database default
collation when using the libc provider.
Discussion: https://postgr.es/m/1a63084d-221e-4075-619e-6b3e590f673e@enterprisedb.com
Reviewed-by: Peter Eisentraut
In the documentation, previously the example command for
ALTER FOREIGN TABLE ... OPTIONS incorrectly included both
the option name and value with the DROP operation.
The correct syntax for the DROP operation requires only
the name of the option to be specified. This commit fixes
the example by removing the option value from the DROP operation.
Back-patch to all supported versions.
Author: Mehmet Emin KARAKAS <emin100@gmail.com>
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CANQrdXAHzbcEYhjGoe5A42OmfvdQhHFJzyKj9gJvHuDKyOF5Ng@mail.gmail.com
The GUC settings lc_collate and lc_ctype are from a time when those
locale settings were cluster-global. When those locale settings were
made per-database (PG 8.4), the settings were kept as read-only. As
of PG 15, you can use ICU as the per-database locale provider, so
examining these settings is already less meaningful and possibly
confusing, since you need to look into pg_database to find out what is
really happening, and they would likely become fully obsolete in the
future anyway.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://www.postgresql.org/message-id/696054d1-bc88-b6ab-129a-18b8bce6a6f0@enterprisedb.com
2dcd1578c4 left the --role option undocumented, which is
inconsistent with other deprecated options such as pg_dump's
--blobs and --no-blobs. This change adds --role back to
createuser's documentation and usage output and marks it as
deprecated.
Suggested-by: Peter Eisentraut
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/0e85c9e7-4804-1cdb-5a4a-c72c328f9ad8%40enterprisedb.com
That's how other boolean options are handled, so do likewise.
The previous coding with "enable" and "disable" was seemingly
modeled on gssencmode, but that's a three-way flag.
While at it, add PGGSSDELEGATION to the set of environment
variables cleared by pg_regress and Utils.pm.
Abhijit Menon-Sen, per gripe from Alvaro Herrera
Discussion: https://postgr.es/m/20230522091609.nlyuu4nolhycqs2p@alvherre.pgsql
This change renames --admin to --with-admin, --role to --member-of,
and --member to --with-member. Many people found the previous
names to be confusing. The --admin and --member options are new in
v16, but --role has been there for a while, so that one has been
kept (but left undocumented) for backward compatibility.
Suggested-by: Peter Eisentraut
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/ZFvVZvQDliIWmOwg%40momjian.us
Tweak column widths in a couple of tables to avoid "contents
... exceed the available area" warnings. Remove usage of
some non-Latin-1 characters.
Discussion: https://postgr.es/m/614600.1684537037@sss.pgh.pa.us
Complete the task begun in 9c0a0e2ed: we don't want to use the
abbreviation "deleg" for GSS delegation in any user-visible places.
(For consistency, this also changes most internal uses too.)
Abhijit Menon-Sen and Tom Lane
Discussion: https://postgr.es/m/949048.1684639317@sss.pgh.pa.us
* document to_reg* accepting OIDs
* document pg_log_standby_snapshot()
* document pg_input_is_valid() and pg_input_error_info()
* handle rename of function to pg_split_walfile_name()
* fix character encoding problem for Przemyslaw Sztoch
* remove partition section
Reported-by: jian he, Tom Lane, Bertrand Drouvot
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
Non-leaf pages of GiST indexes contain key attributes, leaf pages
contain both key and non-key attributes, and gist_page_items() ignored
the handling of non-key attributes. This caused a few problems when
using gist_page_items() on a GiST index with INCLUDE:
- On a non-leaf page, the function would crash.
- On a leaf page, the function would work, but miss to display all the
values for included attributes.
This commit fixes gist_page_items() to handle such cases in a more
appropriate way, and now displays the values of key and non-key
attributes for each item separately in a style consistent with what
ruleutils.c would generate for the attribute list, depending on the page
type dealt with. In a way similar to how a record is displayed, values
would be double-quoted for key or non-key attributes if required.
ruleutils.c did not provide a routine able to control if non-key
attributes should be displayed, so an extended() routine for index
definitions is added to work around the leaf and non-leaf page
differences.
While on it, this commit fixes a third problem related to the amount of
data reported for key attributes. The code originally relied on
BuildIndexValueDescription() (used for error reports on constraints)
that would not print all the data stored in the index but the index
opclass's input type, so this limited the amount of information
available. This switch makes gist_page_items() much cheaper as there is
no need to run ACL checks for each item printed, which is not an issue
anyway as superuser rights are required to execute the functions of
pageinspect. Opclasses whose data cannot be displayed can rely on
gist_page_items_bytea().
The documentation of this function was slightly incorrect for the
output results generated on HEAD and v15, so adjust it on these
branches.
Author: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/17884-cb8c326522977acb@postgresql.org
Backpatch-through: 14
Commit 3581cbdcd6 added a flag to identify empty BRIN ranges. This adds
the new flag to brin_page_items() output.
This is kept as a separate commit as it should not be backpatched.
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
Separate the documentation for language tags themselves from the
available collation settings which can be included in a language tag.
Include tables of the available options, more details about the
effects of each option, and additional examples.
Also include an explanation of the "levels" of textual features and
how they relate to collation.
Discussion: https://postgr.es/m/25787ec7-4c04-9a8a-d241-4dc9be0b1ba3@postgresql.org
Reviewed-by: Jonathan S. Katz
28e626bde0 added the concept of IOOps but neglected to include writeback
operations. ac8d53dae5 added time spent doing these I/O operations. Without
counting writeback, checkpointer write time in the log often differed
substantially from that in pg_stat_io. To fix this, add IOOp IOOP_WRITEBACK
and track writeback in pg_stat_io.
Bumps catversion.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20230419172326.dhgyo4wrrhulovt6%40awork3.anarazel.de
Give the new GUC introduced by d4e71df6 a name that is clearly not
intended for mainstream use quite yet.
Future proposals would drop the prefix only after adding infrastructure
to make it efficient. Having the switch in the tree sooner is good
because it might lead to new discoveries about the hazards awaiting us
on a wide range of systems, but that name was too enticing and could
lead to cross-version confusion in future, per complaints from Noah and
Justin.
Suggested-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com> (the idea, not the patch)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (ditto)
Discussion: https://postgr.es/m/20230430041106.GA2268796%40rfd.leadboat.com
Don't use PSQL_WATCH_PAGER when stdin/stdout are not a terminal.
This corresponds to the restrictions on when other commands will
use [PSQL_]PAGER. There isn't a lot of sense in trying to use a
pager in non-interactive cases, and doing so allows an environment
setting to break our tests.
Also, ignore PSQL_WATCH_PAGER if it is set but empty or all-blank,
for the same reasons we ignore such settings of [PSQL_]PAGER (see
commit 18f8f784c).
No documentation change is really needed, since there is nothing
suggesting that these constraints on [PSQL_]PAGER didn't already
apply to PSQL_WATCH_PAGER too. But I rearranged the text
a little to make it read more naturally (IMHO anyway).
Per report from Pavel Stehule. Back-patch to v15 where
PSQL_WATCH_PAGER was introduced.
Discussion: https://postgr.es/m/CAFj8pRDTwFzmEWdA-gdAcUh0ZnxUioSfTMre71WyB_wNJy-8gw@mail.gmail.com
Fix a link from the "Heap-Only Tuples" documentation section.
Previously, its "fillfactor" link pointed to the "CREATE TABLE"
command's documentation. Now the link directly points to the fillfactor
storage parameter documentation (which is about half way into the
"CREATE TABLE" sect1).
Oversight in commit 115464bb.
Backpatch: 12-, the first version with a usable reloption link.
An update of the GUC stats_fetch_consistency in a transaction would be
able to trigger an assertion when doing cache->snapshot. In this case,
when retrieving a pgstat entry after the switch, a new snapshot would be
rebuilt, confusing pgstat_build_snapshot() because a snapshot is already
cached with an unexpected mode ("cache").
In order to fix this problem, this commit adds a flag to force a
snapshot clear each time this GUC is changed. Some tests are added to
check, while on it.
Some optimizations in avoiding the snapshot clear should be possible
depending on what is cached and the current GUC value, I guess, but this
solution is simple, and ensures that the state of the cache is updated
each time a new pgstat entry is fetched, hence being consistent with the
level wanted by the client that has set the GUC.
Note that cache->none and snapshot->none would not cause issues, as
fetching a pgstat entry would be retrieved from shared memory on the
second attempt, however a snapshot would still be cached. Similarly,
none->snapshot and none->cache would build a new snapshot on the second
fetch attempt. Finally, snapshot->cache would cache a new snapshot on
the second attempt.
Reported-by: Alexander Lakhin
Author: Kyotaro Horiguchi
Discussion: https://postgr.es/m/17804-2a118cd046f2d0e5@postgresql.org
backpatch-through: 15
Commit 1de58df4, which added page-level freezing, taught VACUUM to reuse
each page's "set-visibility-map" snapshotConflictHorizon for freezing
(at least in the vast majority of cases where freezing went ahead).
This made VACUUM FREEZE much less prone to generating recovery conflicts
on standbys; VACUUM FREEZE became only slightly more likely to cause
recovery conflicts than an equivalent VACUUM.
Update old documentation that specifically warned of the likelihood of
recovery conflicts from VACUUM FREEZE. Explain the same general issue
(the issue of VACUUM generating recovery conflicts even in the absence
of dead row cleanup) using the example of conflicts caused by VISIBLE
WAL records.
Add:
- "Restartpoint"
- "Log sequence number"
"LSN" was already listed in the Acronyms appendix, but it is more
suitable as a glossary entry, so move it there and have the acronyms
entry link into the glossary.
Also turn on DocBook parameter glossentry.show.acronym to show
acronyms for glossary entries, which is being used here.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/flat/60915312-62cd-9c94-0d94-556023ece45f%40enterprisedb.com
plperl, plpython, and pltcl all provide query-execution functions
that are thin wrappers around SPI_execute() or its variants.
The SPI functions document their row-count limit arguments clearly,
as "maximum number of rows to return, or 0 for no limit". However
the PLs' documentation failed to explain this special behavior of
zero, so that a reader might well assume it means "fetch zero
rows". Improve that.
Daniel Gustafsson and Tom Lane, per report from Kieran McCusker
Discussion: https://postgr.es/m/CAGgUQ6H6qYScctOhktQ9HLFDDoafBKHyUgJbZ6q_dOApnzNTXg@mail.gmail.com
vacuum_defer_cleanup_age was introduced before hot_standby_feedback and
replication slots existed. It is hard to use reasonably - commonly it will
either be set too low (not preventing recovery conflicts, while still causing
some bloat), or too high (causing a lot of bloat). The alternatives do not
have that issue.
That on its own might not be sufficient reason to remove
vacuum_defer_cleanup_age, but it also complicates computation of xid
horizons. See e.g. the bug fixed in be504a3e97. It also is untested.
This commit removes TransactionIdRetreatSafely(), as there are no users
anymore. There might be potential future users, hence noting that here.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230317230930.nhsgk3qfk7f4axls@awork3.anarazel.de
Unaligned siglen could lead to an unaligned access to subsequent key fields.
Backpatch to 13, where opclass options were introduced.
Reported-by: Alexander Lakhin
Bug: 17847
Discussion: https://postgr.es/m/17847-171232970bea406b%40postgresql.org
Reviewed-by: Tom Lane, Pavel Borisov, Alexander Lakhin
Backpatch-through: 13
a9c70b46 added the statistics view pg_stat_io which contained columns
"io_context" and "io_object". Given that the columns are in the
pg_stat_io view, the "io" prefix is somewhat redundant, so remove it.
The code variables referring to these fields are kept unchanged so as
they can keep their context about I/O.
Bump catalog version.
Author: Melanie Plageman
Reviewed-by: Kyotaro Horiguchi, Fabrízio de Royes Mello
Discussion: https://postgr.es/m/CAAKRu_aAQoJWrvT2BYYQvJChFKra_O-5ra3jhzKJZqWsTR1CPQ@mail.gmail.com
indexes-unique.html mentioned nothing about the availability of NULLS NOT
DISTINCT to modify the NULLs-are-not-equal behavior of unique indexes.
Add this to the synopsis and clarify what it does regarding NULLs.
Author: David Gilman, David Rowley
Reviewed-by: Corey Huinker
Discussion: https://postgr.es/m/CALBH9DDr3NLqzWop1z5uZE-M5G_GYUuAeHFHQeyzFbNd8W0d=Q@mail.gmail.com
Backpatch-through: 15, where NULLS NOT DISTINCT was added
This issue can be reproduced by running `make dist` from the root of the
tree. Error introduced in fcb21b3, where additions of links in
installation.sgml require custom rules in standalone-profile.xsl to make
sure that ./INSTALL is generated correctly for the distribution tarball,
where links are replaced by equivalent terms from the profile file
changed by this commit.
Per buildfarm member guaibasaurus.
Discussion: https://postgr.es/m/ZD859FmcMRCNtz0W@paquier.xyz
We have two existing conventions for long options: either alphabetical
among short options, or all long options after all the short options.
But the convention apparently used here, next to a functionally
related option, is not one of them.
Here we remove the notes which mention which version the given vacuumdb
option is available from. There are now 11 of these notes and they're
both quite untidy and take up far more space than they seem to be worth.
On running a print preview of the compiled HTML, removing these notes
saves about 1 A4 page (~20% less space).
If people need to see which options are available on older versions, then
consulting the documents for that version seems like a good idea. In any
case, when using newer vacuumdb versions on older servers, the user will
receive an error if they try to use an unsupported option.
Additionally, 3 of the notes are warning about the option only being
available from PostgreSQL 9.6 and later. That version's support ended 2.5
years ago. So, it's quite clear that the value of these notes diminishes
over time.
Discussion: https://postgr.es/m/CAApHDvrCQn6tupx2R67VL9RP1Qy4dDuWKRvt4jaB0vk2akQchw@mail.gmail.com
Other vacuumdb options seem to have notes about which version they're
available from, so let's follow this trend for the newly added
--buffer-usage-limit option.
This addresses various deficiencies in the documentation for VACUUM and
ANALYZE's BUFFER_USEAGE_LIMIT docs.
Here we declare "size" in the syntax synopsis for VACUUM and ANALYZE's
BUFFER_USAGE_LIMIT option and then define exactly what values can be
specified for it in the section for that below.
Also, fix the incorrect ordering of vacuumdb options both in the documents
and in vacuumdb's --help output. These should be in alphabetical order.
In passing also add the minimum/maximum range for the BUFFER_USAGE_LIMIT
option. These will also serve as example values that can be modified and
used.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/16845cb1-b228-e157-f293-5892bced9253@enterprisedb.com
Starting with OpenSSL 1.1.0 there is no need to call PQinitOpenSSL
or PQinitSSL to avoid duplicate initialization of OpenSSL. Add a
note to the documentation to explain this.
Backpatch to all supported versions as older OpenSSL versions are
equally likely to be used for all branches.
Reported-by: Sebastien Flaesch <sebastien.flaesch@4js.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/DBAP191MB12895BFFEC4B5FE0460D0F2FB0459@DBAP191MB1289.EURP191.PROD.OUTLOOK.COM
Backpatch-through: 11, all supported versions
WHen building with GSSAPI support, explicitly require MIT Kerberos and
check for gssapi_ext.h in configure.ac and meson.build. Also add
documentation explicitly stating that we now require MIT Kerberos when
building with GSSAPI support.
Reveiwed by: Johnathan Katz
Discussion: https://postgr.es/m/abcc73d0-acf7-6896-e0dc-f5bc12a61bb1@postgresql.org
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
In the HTML output, this decorates section headers and variable list
terms with a marker ("#") that is a link to the same section/term.
That way, links inside a page can be discovered for easier sharing.
The marker only appears when hovering.
This now requires that all elements that are candidates for such a
link have an id attribute. Otherwise, an error will be generated.
All previously missing ids have been added prior to this patch.
Author: Brar Piening <brar@gmx.de>
Reviewed-by: Karl O. Pinc <kop@karlpinc.com>
Discussion: https://www.postgresql.org/message-id/flat/CAB8KJ=jpuQU9QJe4+RgWENrK5g9jhoysMw2nvTN_esoOU0=a_w@mail.gmail.com
This reverts commit e056c557ae and minor later fixes thereof.
There's a few problems in this new feature -- most notably regarding
pg_upgrade behavior, but others as well. This new feature is not in any
way critical on its own, so instead of scrambling to fix it we revert it
and try again in early 17 with these issues in mind.
Discussion: https://postgr.es/m/3801207.1681057430@sss.pgh.pa.us
The previous wording used MVF to indicate the Most Common Values'
Frequencies, but the abbreviation was never explained or defined.
Reword to mcv_freqs to make the use clearer.
Also add MCF and MCV as acronyms as they were using <acronym>
markup but were missing from the acronyms page.
Reported-by: Eric Mutta <eric.mutta@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/166112292492.654.5377188452604176150@wrigleys.postgresql.org
The tables in "71.3. Extensibility" listing the support functions
for bloom and minmax-multi opclasses should include the associated
options function. While this isn't quite as required as the rest,
you need it for full functionality of the opclass.
Back-patch to v14 where these functions were added.
We cannot use the generic array_desc approach with per-tuple nbtree
posting list update metadata because array_desc can only deal with fixed
width elements (e.g., page offset numbers). Using array_desc led to
incorrect rmgr descriptions for updates from nbtree DELETE/VACUUM WAL
records.
To fix, add specialized code to describe the update metadata as array
elements in desc output. We now iterate over the update metadata using
an approach that matches related REDO routines.
Also stop showing the updates offset number array separately in nbtree
DELETE/VACUUM desc output. It's redundant information, since the same
page offset numbers appear in the description of each individual update
element. Also make some small tweaks to the way that we format arrays
in all desc routines (not just nbtree desc routines) to make arrays a
little less verbose.
Oversight in commit 1c453cfd, which enhanced the nbtree rmgr desc
routines.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkbYuvwYKm-Y-72QEh6SPMQcAo9uONv+mR3bMGcu9E_Cg@mail.gmail.com
EXTRACT(EPOCH), EXTRACT(SECOND), and some related cases print more
trailing zeroes than they used to. This behavior change happened
with commit a2da77cdb (Change return type of EXTRACT to numeric),
and it was intentional according to the commit log:
- Return values when extracting fields with possibly fractional
values, such as second and epoch, now have the full scale that the
value has internally (so, for example, '1.000000' instead of just
'1').
It's been like that for two releases now, so while I suggested
changing this back, it's probably better to adjust the documentation
examples.
Per bug #17866 from Евгений Жужнев. Back-patch to v14 where the
change came in.
Discussion: https://postgr.es/m/17866-18eb70095b1594e2@postgresql.org
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Unsurprisingly, this requires wal_level = logical to be set on the primary and
standby. The infrastructure added in 26669757b6 ensures that slots are
invalidated if the primary's wal_level is lowered.
Creating a slot on a standby waits for a xl_running_xact record to be
processed. If the primary is idle (and thus not emitting xl_running_xact
records), that can take a while. To make that faster, this commit also
introduces the pg_log_standby_snapshot() function. By executing it on the
primary, completion of slot creation on the standby can be accelerated.
Note that logical decoding on a standby does not itself enforce that required
catalog rows are not removed. The user has to use physical replication slots +
hot_standby_feedback or other measures to prevent that. If catalog rows
required for a slot are removed, the slot is invalidated.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion, for the addition of the pg_log_standby_snapshot() function.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de> (in an older version)
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: FabrÌzio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
During WAL replay on the standby, when a conflict with a logical slot is
identified, invalidate such slots. There are two sources of conflicts:
1) Using the information added in 6af1793954, logical slots are invalidated if
required rows are removed
2) wal_level on the primary server is reduced to below logical
Uses the infrastructure introduced in the prior commit. FIXME: add commit
reference.
Change InvalidatePossiblyObsoleteSlot() to use a recovery conflict to
interrupt use of a slot, if called in the startup process. The new recovery
conflict is added to pg_stat_database_conflicts, as confl_active_logicalslot.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion for the addition of the pg_stat_database_conflicts column.
Bumps PGSTAT_FILE_FORMAT_ID for the same reason.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Needed for logical decoding on a standby. Slots need to be invalidated because
of the horizon if rows required for logical decoding are removed. If the
primary's wal_level is lowered from 'logical', logical slots on the standby
need to be invalidated.
The new invalidation methods will be used in a subsequent commit.
Logical slots that have been invalidated can be identified via the new
pg_replication_slots.conflicting column.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion for the addition of the new pg_replication_slots column.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Provide a way to ask the kernel to use O_DIRECT (or local equivalent)
where available for data and WAL files, to avoid or minimize kernel
caching. This hurts performance currently and is not intended for end
users yet. Later proposed work would introduce our own I/O clustering,
read-ahead, etc to replace the facilities the kernel disables with this
option.
The only user-visible change, if the developer-only GUC is not used, is
that this commit also removes the obscure logic that would activate
O_DIRECT for the WAL when wal_sync_method=open_[data]sync and
wal_level=minimal (which also requires max_wal_senders=0). Those are
non-default and unlikely settings, and this behavior wasn't (correctly)
documented. The same effect can be achieved with io_direct=wal.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg%40mail.gmail.com
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
a9c70b46db and 8aaa04b32S added counting of IO operations to a new view,
pg_stat_io. Now, add IO timing for reads, writes, extends, and fsyncs to
pg_stat_io as well.
This combines the tracking for pgBufferUsage with the tracking for pg_stat_io
into a new function pgstat_count_io_op_time(). This should make it a bit
easier to avoid the somewhat costly instr_time conversion done for
pgBufferUsage.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_ay5iKmnbXZ3DsauViF3eMxu4m1oNnJXqV_HyqYeg55Ww%40mail.gmail.com
Add helper functions that output arrays in a standard format, and use
the functions inside heapdesc routines. This allows tools like
pg_walinspect to show a detailed description of the page offset number
arrays for records like PRUNE and VACUUM (unless there was an FPI).
Also document the conventions that desc routines should follow. Only
the heapdesc routines follow the conventions for now, so they're just
guidelines for the time being.
Based on a suggestion from Andres Freund.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/flat/20230109215842.fktuhesvayno6o4g%40awork3.anarazel.de
This modernized version of Soundex works significantly better than
the original, particularly for non-English names.
Dag Lem, reviewed by quite a few people along the way
Discussion: https://postgr.es/m/yger1atbgfy.fsf@sid.nimrod.no
It was pointed out that pg_buffercache_summary()'s report of
the overall average usage count isn't that useful, and what
would be more helpful in many cases is to report totals for
each possible usage count. Add a new function to do it like
that. Since pg_buffercache 1.4 is already new for v16,
we don't need to create a new extension version; we'll just
define this as part of 1.4.
Nathan Bossart
Discussion: https://postgr.es/m/20230130233040.GA2800702@nathanxps13
We now create pg_constaint rows for NOT NULL constraints with
contype='n'.
We propagate these constraints during operations such as adding
inheritance relationships, creating and attaching partitions, creating
tables LIKE other tables. We mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations; for example, as opposed to CHECK constraints, we don't
match NOT NULL ones by name when descending a hierarchy to alter it;
instead we match by column number. This means we don't require the
constraint names to be identical across a hierarchy.
For now, we omit them from system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
This has been very long in the making. The first patch was written by
Bernd Helmle in 2010 to add a new pg_constraint.contype value ('n'),
which I (Álvaro) then hijacked in 2011 and 2012, until that one was
killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring additional pg_attribute columns to
track the OID of the NOT NULL constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CACA0E642A0267EDA387AF2B%40%5B172.26.14.62%5D
Discussion: https://postgr.es/m/AANLkTinLXMOEMz+0J29tf1POokKi4XDkWJ6-DDR9BKgU@mail.gmail.com
Discussion: https://postgr.es/m/20110707213401.GA27098@alvh.no-ip.org
Discussion: https://postgr.es/m/1343682669-sup-2532@alvh.no-ip.org
Discussion: https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Discussion: https://postgr.es/m/20220817181249.q7qvj3okywctra3c@alvherre.pgsql
The old wording described these as being multiplied by max_connections
plus max_prepared_transactions, which hasn't been exactly right for
some time thanks to the addition of various auxiliary processes.
Moreover, exactness here is a bit pointless given that the lock tables
can expand into the initially-unallocated "slop" space in shared
memory. Rather than trying to track exactly what the code is doing,
let's just use the term "server processes".
Likewise adjust these GUCs' description strings in guc_tables.c.
Wang Wei, reviewed by Nathan Bossart and myself
Discussion: https://postgr.es/m/OS3PR01MB6275BDD09C9B875C65FCC5AB9EA39@OS3PR01MB6275.jpnprd01.prod.outlook.com
1cbbee033 added BUFFER_USAGE_LIMIT to the VACUUM and ANALYZE commands, so
here we permit that option to be specified in vacuumdb.
In passing, adjust the documents for vacuum_buffer_usage_limit and the
BUFFER_USAGE_LIMIT VACUUM option to mention "kB" rather than "KB". Do the
same for the ERROR message in ExecVacuum() and
check_vacuum_buffer_usage_limit(). Without that we might tell a user that
the valid minimum value is 128 KB only to reject that because we accept
only "kB" and not "KB".
Also, add a small reminder comment in vacuum.h to try to trigger the
memory of anyone adding new fields to VacuumParams that they might want to
consider if vacuumdb needs to grow a new option too.
Author: Melanie Plageman
Reviewed-by: Justin Pryzby
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/ZAzTg3iEnubscvbf@telsasoft.com
Add new options to the VACUUM and ANALYZE commands called
BUFFER_USAGE_LIMIT to allow users more control over how large to make the
buffer access strategy that is used to limit the usage of buffers in
shared buffers. Larger rings can allow VACUUM to run more quickly but
have the drawback of VACUUM possibly evicting more buffers from shared
buffers that might be useful for other queries running on the database.
Here we also add a new GUC named vacuum_buffer_usage_limit which controls
how large to make the access strategy when it's not specified in the
VACUUM/ANALYZE command. This defaults to 256KB, which is the same size as
the access strategy was prior to this change. This setting also
controls how large to make the buffer access strategy for autovacuum.
Per idea by Andres Freund.
Author: Melanie Plageman
Reviewed-by: David Rowley
Reviewed-by: Andres Freund
Reviewed-by: Justin Pryzby
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/20230111182720.ejifsclfwymw2reb@awork3.anarazel.de
Make the \g, \o, \w, and \copy commands set these variables
when closing a pipe. We missed doing this in commit b0d8f2d98,
but it seems like a good idea.
There are some remaining places in psql that intentionally don't
update these variables after running a child program:
* pager invocations
* backtick evaluation within a prompt
* \e (edit query buffer)
Corey Huinker and Tom Lane
Discussion: https://postgr.es/m/CADkLM=eSKwRGF-rnRqhtBORRtL49QsjcVUCa-kLxKTqxypsakw@mail.gmail.com
\watch can now be told to stop after N executions of the query.
With the idea that we might want to add more options to \watch
in future, this patch generalizes the command's syntax to a list
of name=value options, with the interval allowed to omit the name
for backwards compatibility.
Andrey Borodin, reviewed by Kyotaro Horiguchi, Nathan Bossart,
Michael Paquier, Yugo Nagata, and myself
Discussion: https://postgr.es/m/CAAhFRxiZ2-n_L1ErMm9AZjgmUK=qS6VHb+0SaMn8sqqbhF7How@mail.gmail.com
zstd compression supports a special mode for finding matched in distant
past, which may result in better compression ratio, at the expense of
using more memory (the window size is 128MB).
To enable this optional mode, use the "long" keyword when specifying the
compression method (--compress=zstd:long).
Author: Justin Pryzby
Reviewed-by: Tomas Vondra, Jacob Champion
Discussion: https://postgr.es/m/20230224191840.GD1653@telsasoft.com
Discussion: https://postgr.es/m/20220327205020.GM28503@telsasoft.com
postgres_fdw aborts remote (sub)transactions opened on remote server(s)
in a local (sub)transaction one by one when the local (sub)transaction
aborts. This patch allows it to abort the remote (sub)transactions in
parallel to improve performance. This is enabled by the server option
"parallel_abort". The default is false.
Etsuro Fujita, reviewed by David Zhang.
Discussion: http://postgr.es/m/CAPmGK15FuPVGx3TGHKShsbPKKtF1y58-ZLcKoxfN-nqLj1dZ%3Dg%40mail.gmail.com
The primary bottlenecks for relation extension are:
1) The extension lock is held while acquiring a victim buffer for the new
page. Acquiring a victim buffer can require writing out the old page
contents including possibly needing to flush WAL.
2) When extending via ReadBuffer() et al, we write a zero page during the
extension, and then later write out the actual page contents. This can
nearly double the write rate.
3) The existing bulk relation extension infrastructure in hio.c just amortized
the cost of acquiring the relation extension lock, but none of the other
costs.
Unfortunately 1) cannot currently be addressed in a central manner as the
callers to ReadBuffer() need to acquire the extension lock. To address that,
this this commit moves the responsibility for acquiring the extension lock
into bufmgr.c functions. That allows to acquire the relation extension lock
for just the required time. This will also allow us to improve relation
extension further, without changing callers.
The reason we write all-zeroes pages during relation extension is that we hope
to get ENOSPC errors earlier that way (largely works, except for CoW
filesystems). It is easier to handle out-of-space errors gracefully if the
page doesn't yet contain actual tuples. This commit addresses 2), by using the
recently introduced smgrzeroextend(), which extends the relation, without
dirtying the kernel page cache for all the extended pages.
To address 3), this commit introduces a function to extend a relation by
multiple blocks at a time.
There are three new exposed functions: ExtendBufferedRel() for extending the
relation by a single block, ExtendBufferedRelBy() to extend a relation by
multiple blocks at once, and ExtendBufferedRelTo() for extending a relation up
to a certain size.
To avoid duplicating code between ReadBuffer(P_NEW) and the new functions,
ReadBuffer(P_NEW) now implements relation extension with
ExtendBufferedRel(), using a flag to tell ExtendBufferedRel() that the
relation lock is already held.
Note that this commit does not yet lead to a meaningful performance or
scalability improvement - for that uses of ReadBuffer(P_NEW) will need to be
converted to ExtendBuffered*(), which will be done in subsequent commits.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/20221029025420.eplyow6k7tgu6he3@awork3.anarazel.de
This adds a new option to libpq's sslrootcert, "system", which will load
the system trusted CA roots for certificate verification. This is a more
convenient way to achieve this than pointing to the system CA roots
manually since the location can differ by installation and be locally
adjusted by env vars in OpenSSL.
When sslrootcert is set to system, sslmode is forced to be verify-full
as weaker modes aren't providing much security for public CAs.
Changing the location of the system roots by setting environment vars is
not supported by LibreSSL so the tests will use a heuristic to determine
if the system being tested is LibreSSL or OpenSSL.
The workaround in .cirrus.yml is required to handle a strange interaction
between homebrew and the openssl@3 formula; hopefully this can be removed
in the near future.
The original patch was written by Thomas Habets, which was later revived
by Jacob Champion.
Author: Jacob Champion <jchampion@timescale.com>
Author: Thomas Habets <thomas@habets.se>
Reviewed-by: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Reviewed-by: Magnus Hagander <magnus@hagander.net>
Discussion: https://www.postgresql.org/message-id/flat/CA%2BkHd%2BcJwCUxVb-Gj_0ptr3_KZPwi3%2B67vK6HnLFBK9MzuYrLA%40mail.gmail.com
Allow pg_dump to use the zstd compression, in addition to gzip/lz4. Bulk
of the new compression method is implemented in compress_zstd.{c,h},
covering the pg_dump compression APIs. The rest of the patch adds test
and makes various places aware of the new compression method.
The zstd library (which this patch relies on) supports multithreaded
compression since version 1.5. We however disallow that feature for now,
as it might interfere with parallel backups on platforms that rely on
threads (e.g. Windows). This can be improved / relaxed in the future.
This also fixes a minor issue in InitDiscoverCompressFileHandle(), which
was not updated to check if the file already has the .lz4 extension.
Adding zstd compression was originally proposed in 2020 (see the second
thread), but then was reworked to use the new compression API introduced
in e9960732a9. I've considered both threads when compiling the list of
reviewers.
Author: Justin Pryzby
Reviewed-by: Tomas Vondra, Jacob Champion, Andreas Karlsson
Discussion: https://postgr.es/m/20230224191840.GD1653@telsasoft.com
Discussion: https://postgr.es/m/20201221194924.GI30237@telsasoft.com
Since 8b9e9644d, the messages for failed permissions checks report
"table" where appropriate, rather than "relation".
Backpatch to all supported branches
The meson docs generation hardcoded using the website style so far. Make it
configurable via a meson option.
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reported-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/3fc3bb9b-f7f8-d442-35c1-ec82280c564a@enterprisedb.com
Until now the meson built docs did not have a working reference to the css
stylesheet, it was copied in the make target. Instead of duplicating that for
meson, use the docbook-xsl parameter custom.css.source to reference it. An
additional benefit of that approach is that the stylesheet is now included in
the single-file HTML documentation.
Reported-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/3fc3bb9b-f7f8-d442-35c1-ec82280c564a@enterprisedb.com
Until now the meson built HTML docs had non-working references to images. They
were copied in the make target. Instead of duplicating that for meson, copy
them as part of the xslt stylesheet.
Reported-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/3fc3bb9b-f7f8-d442-35c1-ec82280c564a@enterprisedb.com
Detect and report if the tools necessary to build documentation are available
during configure. This is represented as two new options 'docs' and
'docs_pdf', both defaulting to 'auto'.
This should also fix a meson error about the installdocs target, when none of
the doc tools are found.
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20230325201414.sh7c6xlut2fpunnv@awork3.anarazel.de
Discussion: https://postgr.es/m/ZB8331v5IhUA/pNu@telsasoft.com
We had partial support for generating documentation suitable for .chm
files. However, we only had wired up generating the input files using
docbook-xsl, not generating an actual .chm file. Nor did we document how to do
so. Additionally, it was very slow to generate htmlhelp, as we never applied
the docbook-xsl stylesheet performance improvements to htmlhelp.
It doesn't look like there's any interest in the htmlhelp output, so remove
it, instead of spending cycles to finish the support.
Discussion: https://postgr.es/m/20230324165822.wcrj3akllbqquy7u@awork3.anarazel.de
The explanation describing the dependency to system read() calls for
these two functions has been removed in ddfc2d9. And after more
discussion about d69c404, we have concluded that adding more details
makes them easier to understand.
While on it, use the term "block read requests" (maybe found in cache)
rather than "buffers fetched" and "buffer hits".
Per discussion with Melanie Plageman, Kyotaro Horiguchi, Bertrand
Drouvot and myself.
Discussion: https://postgr.es/m/CAAKRu_ZmdiScT4q83OAbfmR5AH-L5zWya3SXjaxiJvhCob-e2A@mail.gmail.com
Backpatch-through: 11
Convert to BCP47 language tags before storing in the catalog, except
during binary upgrade or when the locale comes from an existing
collation or template database.
The resulting language tags can vary slightly between ICU
versions. For instance, "@colBackwards=yes" is converted to
"und-u-kb-true" in older versions of ICU, and to the simpler (but
equivalent) "und-u-kb" in newer versions.
The process of canonicalizing to a language tag also understands more
input locale string formats than ucol_open(). For instance,
"fr_CA.UTF-8" is misinterpreted by ucol_open() and the region is
ignored; effectively treating it the same as the locale "fr" and
opening the wrong collator. Canonicalization properly interprets the
language and region, resulting in the language tag "fr-CA", which can
then be understood by ucol_open().
This commit fixes a problem in prior versions due to ucol_open()
misinterpreting locale strings as described above. For instance,
creating an ICU collation with locale "fr_CA.UTF-8" would store that
string directly in the catalog, which would later be passed to (and
misinterpreted by) ucol_open(). After this commit, the locale string
will be canonicalized to language tag "fr-CA" in the catalog, which
will be properly understood by ucol_open(). Because this fix affects
the resulting collator, we cannot change the locale string stored in
the catalog for existing databases or collations; otherwise we'd risk
corrupting indexes. Therefore, only canonicalize locales for
newly-created (not upgraded) collations/databases. For similar
reasons, do not backport.
Discussion: https://postgr.es/m/8c7af6820aed94dc7bc259d2aa7f9663518e6137.camel@j-davis.com
Reviewed-by: Peter Eisentraut
Invent "GET DIAGNOSTICS oid_variable = PG_ROUTINE_OID".
This is useful for avoiding the maintenance nuisances that come
with embedding a function's name in its body, as one might do
for logging purposes for example. Typically users would cast the
result to regproc or regprocedure to get something human-readable,
but we won't pre-judge whether that's appropriate.
Pavel Stehule, reviewed by Kirk Wolak and myself
Discussion: https://postgr.es/m/CAFj8pRA4zMd5pY-B89Gm64bDLRt-L+akOd34aD1j4PEstHHSVQ@mail.gmail.com
This option is normally false, but can be set to true to obtain
the legacy behavior where the subscription runs with the permissions
of the subscription owner rather than the permissions of the
table owner. The advantages of this mode are (1) it doesn't require
that the subscription owner have permission to SET ROLE to each
table owner and (2) since no role switching occurs, the
SECURITY_RESTRICTED_OPERATION restrictions do not apply.
On the downside, it allows any table owner to easily usurp
the privileges of the subscription owner - basically, to take
over their account. Because that's generally quite undesirable,
we don't make this mode the default, but we do make it available,
just in case the new behavior causes too many problems for someone.
Discussion: http://postgr.es/m/CA+TgmoZ-WEeG6Z14AfH7KhmpX2eFh+tZ0z+vf0=eMDdbda269g@mail.gmail.com
Up until now, logical replication actions have been performed as the
subscription owner, who will generally be a superuser. Commit
cec57b1a0f documented hazards
associated with that situation, namely, that any user who owns a
table on the subscriber side could assume the privileges of the
subscription owner by attaching a trigger, expression index, or
some other kind of executable code to it. As a remedy, it suggested
not creating configurations where users who are not fully trusted
own tables on the subscriber.
Although that will work, it basically precludes using logical
replication in the way that people typically want to use it,
namely, to replicate a database from one node to another
without necessarily having any restrictions on which database
users can own tables. So, instead, change logical replication to
execute INSERT, UPDATE, DELETE, and TRUNCATE operations as the
table owner when they are replicated.
Since this involves switching the active user frequently within
a session that is authenticated as the subscription user, also
impose SECURITY_RESTRICTED_OPERATION restrictions on logical
replication code. As an exception, if the table owner can SET
ROLE to the subscription owner, these restrictions have no
security value, so don't impose them in that case.
Subscription owners are now required to have the ability to
SET ROLE to every role that owns a table that the subscription
is replicating. If they don't, replication will fail. Superusers,
who normally own subscriptions, satisfy this property by default.
Non-superusers users who own subscriptions will need to be
granted the roles that own relevant tables.
Patch by me, reviewed (but not necessarily in its entirety) by
Jelte Fennema, Jeff Davis, and Noah Misch.
Discussion: http://postgr.es/m/CA+TgmoaSCkg9ww9oppPqqs+9RVqCexYCE6Aq=UsYPfnOoDeFkw@mail.gmail.com
The trace point was using the relfileno / fork / block for the to-be-read-in
buffer. Some upcoming work would make that more expensive to provide. We still
have buffer-flush-start/done, which can serve most tracing needs that
buffer-write-dirty could serve.
Discussion: https://postgr.es/m/f5164e7a-eef6-8972-75a3-8ac622ed0c6e@iki.fi
Traditionally, vacuum always makes use of a buffer access strategy 32
buffers in size. This means that running vacuums tend not to cause too
many shared buffers to become dirty, however, this can cause vacuums to
run much more slowly than they otherwise could as WAL flushes will occur
more frequently due to having to flush WAL out to the LSN of the dirty
page before that page can be written to disk.
When we are performing failsafe VACUUMs (as added in 1e55e7d17), we really
want to make the vacuum work go as quickly as possible, so here we disable
the buffer access strategy when entering failsafe mode while vacuuming a
relation.
Per idea and analyis from Andres Freund.
In passing, also include some changes I had intended for 32fbe0239.
Author: Melanie Plageman
Reviewed-by: Justin Pryzby, David Rowley
Discussion: https://postgr.es/m/20230111182720.ejifsclfwymw2reb%40awork3.anarazel.de
It seems useful to add this to the glossary as there's discussion around
adding an option to VACUUM to disable and adjust the size of the buffer
access strategy that VACUUM uses.
Author: Melanie Plageman
Reviewed-by: Justin Pryzby, David Rowley
Discussion: https://postgr.es/m/ZBYDTrD1kyGg%2BHkS%40telsasoft.com
Allow users to opt out of returning FPI data and block data from
pg_get_wal_block_info as an optimization. Testing has shown that this
can make function execution over twice as fast in some cases.
When pg_get_wal_block_info is called with "show_data := false", it
always returns NULL values for its block_data and block_fpi_data bytea
output parameters. Nothing else changes. In particular, the function
will still return the usual per-block summary of block data/FPI space
overhead. Use of "show_data := false" is therefore feasible with all
queries that don't specifically require these raw binary strings.
Follow-up to recent work in commit 122376f0. There still hasn't been a
stable release with the pg_get_wal_block_info function, so no bump in
the pg_walinspect extension version.
Per suggestion from Melanie Plageman.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAAKRu_bJvbcYBRj2cN6G2xV7B7-Ja+pjTO1nEnEhRR8OXYiABA@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wzm9shOkEDM10_+qOZkRSQhKVxwBFiehH6EHWQQRd_rDPw@mail.gmail.com
This patch introduces the SQL standard IS JSON predicate. It operates
on text and bytea values representing JSON, as well as on the json and
jsonb types. Each test has IS and IS NOT variants and supports a WITH
UNIQUE KEYS flag. The tests are:
IS JSON [VALUE]
IS JSON ARRAY
IS JSON OBJECT
IS JSON SCALAR
These should be self-explanatory.
The WITH UNIQUE KEYS flag makes these return false when duplicate keys
exist in any object within the value, not necessarily directly contained
in the outermost object.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Author: Andrew Dunstan <andrew@dunslane.net>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
This converts pg_regress output format to emit TAP compliant output
while keeping it as human readable as possible for use without TAP
test harnesses. As verbose harness related information isn't really
supported by TAP this also reduces the verbosity of pg_regress runs
which makes scrolling through log output in buildfarm/CI runs a bit
easier as well.
As the meson TAP parser conumes whitespace, the leading indentation
for differentiating parallel tests from sequential tests has been
changed to a single character prefix.
This patch has been around for an extended period of time, reviewers
listed below may have been involved in reviewing a version quite
different from the version in this commit. The original idea for
this patch was a hacking session with Jinbao Chen.
TAP format testing is also enabled in meson as of this.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Nikolay Shaplov <dhyan@nataraj.su>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/BD4B107D-7E53-4794-ACBA-275BEB4327C9@yesql.se
Discussion: https://postgr.es/m/20220221164736.rq3ornzjdkmwk2wo@alap3.anarazel.de
Among other things, this should make it easier to calculate a useful cache hit
ratio by excluding buffer reads via buffer access strategies. As buffer access
strategies reuse buffers (and thus evict the prior buffer contents), it is
normal to see reads on repeated scans of the same data.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAAKRu_beMa9Hzih40%3DXPYqhDVz6tsgUGTrhZXRo%3Dunp%2Bszb%3DUA%40mail.gmail.com
Expand the output parameters in pg_walinspect's pg_get_wal_block_info
function to return additional information that was previously only
available from pg_walinspect's pg_get_wal_records_info function. Some
of the details are attributed to individual block references, rather
than aggregated into whole-record values, since the function returns one
row per block reference per WAL record (unlike pg_get_wal_records_info,
which always returns one row per WAL record).
This structure is much easier to work with when writing queries that
track how individual blocks changed over time, or when attributing costs
to individual blocks (not WAL records) is useful.
This is the second time that pg_get_wal_block_info has been enhanced in
recent weeks. Commit 9ecb134a expanded on the original version of the
function added in commit c31cf1c0 (where it first appeared under the
name pg_get_wal_fpi_info). There still hasn't been a stable release
since commit c31cf1c0, so no bump in the pg_walinspect extension
version.
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Kyotaro HORIGUCHI <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CALj2ACVRK5=Z+2ZVsjgTTSkfEnQzCuwny7iigpG7g1btk4Ws2A@mail.gmail.com
This role can be granted to non-superusers to allow them to issue
CREATE SUBSCRIPTION. The non-superuser must additionally have CREATE
permissions on the database in which the subscription is to be
created.
Most forms of ALTER SUBSCRIPTION, including ALTER SUBSCRIPTION .. SKIP,
now require only that the role performing the operation own the
subscription, or inherit the privileges of the owner. However, to
use ALTER SUBSCRIPTION ... RENAME or ALTER SUBSCRIPTION ... OWNER TO,
you also need CREATE permission on the database. This is similar to
what we do for schemas. To change the owner of a schema, you must also
have permission to SET ROLE to the new owner, similar to what we do
for other object types.
Non-superusers are required to specify a password for authentication
and the remote side must use the password, similar to what is required
for postgres_fdw and dblink. A superuser who wants a non-superuser to
own a subscription that does not rely on password authentication may
set the new password_required=false property on that subscription. A
non-superuser may not set password_required=false and may not modify a
subscription that already has password_required=false.
This new password_required subscription property works much like the
eponymous postgres_fdw property. In both cases, the actual semantics
are that a password is not required if either (1) the property is set
to false or (2) the relevant user is the superuser.
Patch by me, reviewed by Andres Freund, Jeff Davis, Mark Dilger,
and Stephen Frost (but some of those people did not fully endorse
all of the decisions that the patch makes).
Discussion: http://postgr.es/m/CA+TgmoaDH=0Xj7OBiQnsHTKcF2c4L+=gzPBUKSJLh8zed2_+Dg@mail.gmail.com
This adds support for load balancing connections with libpq using a
connection parameter: load_balance_hosts=<string>. When setting the
param to random, hosts and addresses will be connected to in random
order. This then results in load balancing across these addresses and
hosts when multiple clients or frequent connection setups are used.
The randomization employed performs two levels of shuffling:
1. The given hosts are randomly shuffled, before resolving them
one-by-one.
2. Once a host its addresses get resolved, the returned addresses
are shuffled, before trying to connect to them one-by-one.
Author: Jelte Fennema <postgres@jeltef.nl>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Michael Banck <mbanck@gmx.net>
Reviewed-by: Andrey Borodin <amborodin86@gmail.com>
Discussion: https://postgr.es/m/PR3PR83MB04768E2FF04818EEB2179949F7A69@PR3PR83MB0476.EURPRD83.prod.outlook.
This commit introduces the SQL/JSON standard-conforming constructors for
JSON types:
JSON_ARRAY()
JSON_ARRAYAGG()
JSON_OBJECT()
JSON_OBJECTAGG()
Most of the functionality was already present in PostgreSQL-specific
functions, but these include some new functionality such as the ability
to skip or include NULL values, and to allow duplicate keys or throw
error when they are found, as well as the standard specified syntax to
specify output type and format.
Author: Nikita Glukhov <n.gluhov@postgrespro.ru>
Author: Teodor Sigaev <teodor@sigaev.ru>
Author: Oleg Bartunov <obartunov@gmail.com>
Author: Alexander Korotkov <aekorotkov@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reviewers have included (in no particular order) Andres Freund, Alexander
Korotkov, Pavel Stehule, Andrew Alsup, Erik Rijkers, Zihong Yu,
Himanshu Upadhyaya, Daniel Gustafsson, Justin Pryzby.
Discussion: https://postgr.es/m/CAF4Au4w2x-5LTnN_bxky-mq4=WOqsGsxSpENCzHRAzSnEd8+WQ@mail.gmail.com
Discussion: https://postgr.es/m/cd0bb935-0158-78a7-08b5-904886deac4b@postgrespro.ru
Discussion: https://postgr.es/m/20220616233130.rparivafipt6doj3@alap3.anarazel.de
Discussion: https://postgr.es/m/abd9b83b-aa66-f230-3d6d-734817f0995d%40postgresql.org
When there are multiple publications for a subscription and one of those
publishes via the parent table by using publish_via_partition_root and the
other one directly publishes the child table, we end up copying the same
data twice during initial synchronization. The reason for this was that we
get both the parent and child tables from the publisher and try to copy
the data for both of them.
This patch extends the function pg_get_publication_tables() to take a
publication list as its input parameter. This allows us to exclude a
partition table whose ancestor is published by the same publication list.
This problem does exist in back-branches but we decide to fix it there in
a separate commit if required. The fix for back-branches requires quite
complicated changes to fetch the required table information from the
publisher as we can't update the function pg_get_publication_tables() in
back-branches. We are not sure whether we want to deviate and complicate
the code in back-branches for this problem as there are no field reports
yet.
Author: Wang wei
Reviewed-by: Peter Smith, Jacob Champion, Kuroda Hayato, Vignesh C, Osumi Takamichi, Amit Kapila
Discussion: https://postgr.es/m/OS0PR01MB57167F45D481F78CDC5986F794B99@OS0PR01MB5716.jpnprd01.prod.outlook.com
Commit ecb696527c added an XML ID attribute to one varlistentry in
create_subscription.sgml. Following 78ee60ed84, this commit adds XML ID
attributes to all varlistentries in create_subscription.sgml.
Additionally, links are added to refer to the subscription options,
enhancing the readability of documents.
Author: Kuroda Hayato
Reviewed-by: Peter Smith, Amit Kapila
Discussion: https://postgr.es/m/TYAPR01MB58667AE04D291924671E2051F5879@TYAPR01MB5866.jpnprd01.prod.outlook.com
For ICU collations, ensure that the locale's language exists in ICU,
and that the locale can be opened.
Basic validation helps avoid minor mistakes and misspellings, which
often fall back to the root locale instead of the intended
locale. It's even more important to avoid such mistakes in ICU
versions 54 and earlier, where the same (misspelled) locale string
could fall back to different locales depending on the environment.
Discussion: https://postgr.es/m/11b1eeb7e7667fdd4178497aeb796c48d26e69b9.camel@j-davis.com
Discussion: https://postgr.es/m/df2efad0cae7c65180df8e5ebb709e5eb4f2a82b.camel@j-davis.com
Reviewed-by: Peter Eisentraut
Change the columns attndims, attstattarget, and attinhcount from int32
to int16, and reorder a bit. This saves some space (currently 4
bytes) in pg_attribute and tuple descriptors, which translates into
small performance benefits and/or room for new columns in pg_attribute
needed by future features.
attndims and attinhcount are never realistically used with values
larger than int16. Just to be sure, add some overflow checks.
attstattarget is currently limited explicitly to 10000.
For consistency, pg_constraint.coninhcount is also changed like
attinhcount.
Discussion: https://www.postgresql.org/message-id/flat/d07ffc2b-e0e8-77f7-38fb-be921dff71af%40enterprisedb.com
Commit 4c8d65408 incorrectly stated that Homebrew has changed its
prefix for Apple M1 machines, but the prefix change applies to all
Apple Silicon based machines. Fix by writing Apple Silicon instead
of Apple M1.
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://postgr.es/m/87mt3ys8ng.fsf@wibble.ilmari.org
Replace the hardcoded value with a GUC such that the iteration
count can be raised in order to increase protection against
brute-force attacks. The hardcoded value for SCRAM iteration
count was defined to be 4096, which is taken from RFC 7677, so
set the default for the GUC to 4096 to match. In RFC 7677 the
recommendation is at least 15000 iterations but 4096 is listed
as a SHOULD requirement given that it's estimated to yield a
0.5s processing time on a mobile handset of the time of RFC
writing (late 2015).
Raising the iteration count of SCRAM will make stored passwords
more resilient to brute-force attacks at a higher computational
cost during connection establishment. Lowering the count will
reduce computational overhead during connections at the tradeoff
of reducing strength against brute-force attacks.
There are however platforms where even a modest iteration count
yields a too high computational overhead, with weaker password
encryption schemes chosen as a result. In these situations,
SCRAM with a very low iteration count still gives benefits over
weaker schemes like md5, so we allow the iteration count to be
set to one at the low end.
The new GUC is intentionally generically named such that it can
be made to support future SCRAM standards should they emerge.
At that point the value can be made into key:value pairs with
an undefined key as a default which will be backwards compatible
with this.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Discussion: https://postgr.es/m/F72E7BC7-189F-4B17-BF47-9735EB72C364@yesql.se
Word-smith section 22.1 ("Database Roles") a little bit in hopes
of removing confusion about how the bootstrap superuser's name
is chosen.
While here, I couldn't help noticing that the claim that the bootstrap
superuser is the only initially-existing role has been a lie since
we started to invent predefined roles. We don't want too much detail
in this very introductory text, but it seems worth changing it to say
that it's the only initially-existing login-capable role.
Per documentation comment from Maja Zaloznik.
Discussion: https://postgr.es/m/167931662853.3349090.18217722739345182859@wrigleys.postgresql.org
The "partitions_total" and "partitions_done" fields were updated
as though the current level of partitioning was the only one.
In multi-level cases, not only could partitions_total change
over the course of the command, but partitions_done could go
backwards or exceed the currently-reported partitions_total.
Fix by setting partitions_total to the total number of direct
and indirect children once at command start, and then just
incrementing partitions_done at appropriate points. Invent
a new progress monitoring function "pgstat_progress_incr_param"
to simplify doing the latter. We can avoid adding cost for the
former when doing CREATE INDEX, because ProcessUtility already
enumerates the children and it's pretty easy to pass the count
down to DefineIndex. In principle the same could be done in
ALTER TABLE, but that's structurally difficult; for now, just
eat the cost of an extra find_all_inheritors scan in that case.
Ilya Gladyshev and Justin Pryzby
Discussion: https://postgr.es/m/a15f904a70924ffa4ca25c3c744cff31e0e6e143.camel@gmail.com
These were causing "contents ... exceed the available area"
warnings in PDF builds, and also didn't quite follow our markup
conventions for function examples. To fix the overwidth
problem, reduce the number of fields shown in one example,
and also insert &zwsp; to let the header line be broken in
a reasonable place.
Discussion: https://postgr.es/m/20230324194701.dqkzcdtlcikseo22@awork3.anarazel.de
This provides a very simple way to see the generic plan for a
parameterized query. Without this, it's necessary to define
a prepared statement and temporarily change plan_cache_mode,
which is a bit tedious.
One thing that's a bit of a hack perhaps is that we disable
execution-time partition pruning when the GENERIC_PLAN option
is given. That's because the pruning code may attempt to
fetch the value of one of the parameters, which would fail.
Laurenz Albe, reviewed by Julien Rouhaud, Christoph Berg,
Michel Pelletier, Jim Jones, and myself
Discussion: https://postgr.es/m/0a29b954b10b57f0d135fe12aa0909bd41883eb0.camel@cybertec.at
The sslcertmode option controls whether the server is allowed and/or
required to request a certificate from the client. There are three
modes:
- "allow" is the default and follows the current behavior, where a
configured client certificate is sent if the server requests one
(via one of its default locations or sslcert). With the current
implementation, will happen whenever TLS is negotiated.
- "disable" causes the client to refuse to send a client certificate
even if sslcert is configured or if a client certificate is available in
one of its default locations.
- "require" causes the client to fail if a client certificate is never
sent and the server opens a connection anyway. This doesn't add any
additional security, since there is no guarantee that the server is
validating the certificate correctly, but it may helpful to troubleshoot
more complicated TLS setups.
sslcertmode=require requires SSL_CTX_set_cert_cb(), available since
OpenSSL 1.0.2. Note that LibreSSL does not include it.
Using a connection parameter different than require_auth has come up as
the simplest design because certificate authentication does not rely
directly on any of the AUTH_REQ_* codes, and one may want to require a
certificate to be sent in combination of a given authentication method,
like SCRAM-SHA-256.
TAP tests are added in src/test/ssl/, some of them relying on sslinfo to
check if a certificate has been set. These are compatible across all
the versions of OpenSSL supported on HEAD (currently down to 1.0.1).
Author: Jacob Champion
Reviewed-by: Aleksander Alekseev, Peter Eisentraut, David G. Johnston,
Michael Paquier
Discussion: https://postgr.es/m/9e5a8ccddb8355ea9fa4b75a1e3a9edc88a70cd3.camel@vmware.com
Add pgstat counter to track row updates that result in the successor
version going to a new heap page, leaving behind an original version
whose t_ctid points to the new version. The current count is shown by
the n_tup_newpage_upd column of each of the pg_stat_*_tables views.
The new n_tup_newpage_upd column complements the existing n_tup_hot_upd
and n_tup_upd columns. Tables that have high n_tup_newpage_upd values
(relative to n_tup_upd) are good candidates for tuning heap fillfactor.
Corey Huinker, with small tweaks by me.
Author: Corey Huinker <corey.huinker@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CADkLM=ded21M9iZ36hHm-vj2rE2d=zcKpUQMds__Xm2pxLfHKA@mail.gmail.com
This patch allows copying tables in the binary format during table
synchronization when the binary option for a subscription is enabled.
Previously, tables are copied in text format even if the subscription is
created with the binary option enabled. Copying tables in binary format
may reduce the time spent depending on column types.
A binary copy for initial table synchronization is supported only when
both publisher and subscriber are v16 or later.
Author: Melih Mutlu
Reviewed-by: Peter Smith, Shi yu, Euler Taveira, Vignesh C, Kuroda Hayato, Osumi Takamichi, Bharath Rupireddy, Hou Zhijie
Discussion: https://postgr.es/m/CAGPVpCQvAziCLknEnygY0v1-KBtg%2BOm-9JHJYZOnNPKFJPompw%40mail.gmail.com
* Commit 3048898e dropped -ING from PHJ wait event names. Update the
corresponding barrier phases names to match.
* Rename the "DONE" phases to "FREE". That's symmetrical with
"ALLOCATE", and names the activity that actually happens in that phase
(as we do for the other phases) rather than a state. The bug fixed by
commit 8d578b9b might have been more obvious with this name.
* Rename the batch/bucket growth barriers' "ALLOCATE" phases to
"REALLOCATE", a better description of what they do.
* Update the high level comments about phases to highlight phases
are executed by a single process with an asterisk (mostly memory
management phases).
No behavior change, as this is just improving internal identifiers. The
only user-visible sign of this is that a couple of wait events' display
names change from "...Allocate" to "...Reallocate" in pg_stat_activity,
to stay in sync with the internal names.
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BMDpwF2Eo2LAvzd%3DpOh81wUTsrwU1uAwR-v6OGBB6%2B7g%40mail.gmail.com
This option, or its long form --set, sets the GUC "name" to "value".
The setting applies in the bootstrap and standalone servers run by
initdb, and is also written into the generated postgresql.conf.
This can save an extra editing step when creating a new cluster,
but the real use-case is for coping with situations where the
bootstrap server fails to start due to environmental issues;
for example, if it's necessary to force huge_pages to off.
Discussion: https://postgr.es/m/2844176.1674681919@sss.pgh.pa.us
This commit adds some documentation about two monitoring functions:
- pg_stat_get_xact_blocks_fetched()
- pg_stat_get_xact_blocks_hit()
The description of these functions has been removed in ddfc2d9, later
simplified by 5f2b089, assuming that all the functions whose
descriptions were removed are used in system views. Unfortunately, some
of them were are not used in any system views, so they lacked
documentation.
This gap exists in the docs for a long time, so backpatch all the way
down.
Reported-by: Michael Paquier
Author: Bertrand Drouvot
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/ZBeeH5UoNkTPrwHO@paquier.xyz
Backpatch-through: 11
These are set after a \! command or a backtick substitution.
SHELL_ERROR is just "true" for error (nonzero exit status) or "false"
for success, while SHELL_EXIT_CODE records the actual exit status
following standard shell/system(3) conventions.
Corey Huinker, reviewed by Maxim Orlov and myself
Discussion: https://postgr.es/m/CADkLM=cWao2x2f+UDw15W1JkVFr_bsxfstw=NGea7r9m4j-7rQ@mail.gmail.com
This makes it easier to specify values taken directly from WAL file
names.
The option parsing is arranged in the style of option_parse_int() (but
we need to parse unsigned int), to allow future refactoring in the
same manner.
Reviewed-by: Sébastien Lardière <sebastien@lardiere.net>
Discussion: https://www.postgresql.org/message-id/flat/8fef346e-2541-76c3-d768-6536ae052993@lardiere.net
@extschema:name@ extends the existing @extschema@ feature so that
we can also insert the schema name of some required extension,
thus making cross-extension references robust even if they are in
different schemas.
However, this has the same hazard as @extschema@: if the schema
name is embedded literally in an installed object, rather than being
looked up once during extension script execution, then it's no longer
safe to relocate the other extension to another schema. To deal with
that without restricting things unnecessarily, add a "no_relocate"
option to extension control files. This allows an extension to
specify that it cannot handle relocation of some of its required
extensions, even if in themselves those extensions are relocatable.
We detect "no_relocate" requests of dependent extensions during
ALTER EXTENSION SET SCHEMA.
Regina Obe, reviewed by Sandro Santilli and myself
Discussion: https://postgr.es/m/003001d8f4ae$402282c0$c0678840$@pcorp.us