pg_database.datfrozenxid gets updated using an in-place update at the
end of vacuum or autovacuum. Since 96cdeae, as pg_database has a toast
relation, it is possible for a pg_database tuple to have toast values
if there is a large set of ACLs in place. In such a case, the in-place
update would fail because of the flattening of the toast values done for
the catcache entry fetched. Instead of using a copy from the catcache,
this changes the logic to fetch the copy of the tuple by directly
scanning pg_database.
Per the lack of complaints on the matter, no backpatch is done. Note
that before 96cdeae, attempting to insert such a tuple to pg_database
would cause a "row is too big" error, so the end-of-vacuum problem was
not reachable.
Author: Ashwin Agrawal, Junfeng Yang
Discussion: https://postgr.es/m/DM5PR0501MB38800D9E4605BCA72DD35557CCE10@DM5PR0501MB3880.namprd05.prod.outlook.com
User-visible log messages should go through ereport(), so they are
subject to translation. Many remaining elog(LOG) calls are really
debugging calls.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://www.postgresql.org/message-id/flat/92d6f545-5102-65d8-3c87-489f71ea0a37%40enterprisedb.com
Previously pg_stat_progress_cluster view reported the current block
number in heap scan as the number of heap blocks scanned (i.e.,
heap_blks_scanned). This reported number could be incorrect when
synchronize_seqscans is enabled, because it allowed the heap scan to
start at block in middle. This could result in wraparounds in the
heap_blks_scanned column when the heap scan wrapped around.
This commit fixes the bug by calculating the number of blocks from
the block that the heap scan starts at to the current block in scan,
and reporting that number in the heap_blks_scanned column.
Also, in pg_stat_progress_cluster view, previously heap_blks_scanned
could not reach heap_blks_total at the end of heap scan phase
if the last pages scanned were empty. This commit fixes the bug by
manually updating heap_blks_scanned to the same value as
heap_blks_total when the heap scan phase finishes.
Back-patch to v12 where pg_stat_progress_cluster view was introduced.
Reported-by: Matthias van de Meent
Author: Matthias van de Meent
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAEze2WjCBWSGkVfYag001Rc4+-nNLDpWM7QbyD6yPvuhKs-gYQ@mail.gmail.com
While ereport() and elog() themselves are quite cheap when the
error message level is too low to be printed, some places need to do
substantial work before they can call those macros at all. To allow
optimizing away such setup work when nothing is to be printed, make
elog.c export a new function message_level_is_interesting(elevel)
that reports whether ereport/elog will do anything. Make use of that
in various places that had ad-hoc direct tests of log_min_messages etc.
Also teach ProcSleep to use it to avoid some work. (There may well
be other places that could usefully use this; I didn't search hard.)
Within elog.c, refactor a little bit to avoid having duplicate copies
of the policy-setting logic. When that code was written, we weren't
relying on the availability of inline functions; so it had some
duplications in the name of efficiency, which I got rid of.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/129515.1606166429@sss.pgh.pa.us
Historically these were called >^ and <^, but that is inconsistent
with the similar box, polygon, and circle operators, which are named
|>> and <<| respectively. Worse, the >^ and <^ names are used for
*not* strict above/below tests for the box type.
Hence, invent new operators following the more common naming. The
old operators remain available for now, and are still accepted by
the relevant index opclasses too. But there's a deprecation notice,
so maybe we can get rid of them someday.
Emre Hasegeli, reviewed by Pavel Borisov
Discussion: https://postgr.es/m/24348.1587444160@sss.pgh.pa.us
Previously, when restore_command claimed to succeed but failed to restore
the file with the right name, for example, due to mis-configuration of
restore_command, no log message was reported. Then the recovery failed
later with an error message not directly related to the issue.
This commit changes the recovery so that a log message is emitted in
this error case. This would enable us to investigate what happened in
this case more easily.
Author: Jeff Janes, Fujii Masao
Reviewed-by: Pavel Borisov, Kyotaro Horiguchi
Discussion: https://postgr.es/m/CAMkU=1xkFs3Omp4JR4wMYWdam_KLuj6LXnTYfU8u3T0h=PLLMQ@mail.gmail.com
Streamline handling of the various strategies that we have to avoid a
page split in nbtinsert.c. When it looks like a leaf page is about to
overflow, we now perform deleting LP_DEAD items and deduplication in one
central place. This greatly simplifies _bt_findinsertloc().
This has an independently useful consequence: nbtree no longer relies on
the BTP_HAS_GARBAGE page level flag/hint for anything important. We
still set and unset the flag in the same way as before, but it's no
longer treated as a gating condition when considering if we should check
for already-set LP_DEAD bits. This happens at the point where the page
looks like it might have to be split anyway, so simply checking the
LP_DEAD bits in passing is practically free. This avoids missing
LP_DEAD bits just because the page-level hint is unset, which is
probably reasonably common (e.g. it happens when VACUUM unsets the
page-level flag without actually removing index tuples whose LP_DEAD-bit
was set recently, after the VACUUM operation began but before it reached
the leaf page in question).
Note that this isn't a big behavioral change compared to PostgreSQL 13.
We were already checking for set LP_DEAD bits regardless of whether the
BTP_HAS_GARBAGE page level flag was set before we considered doing a
deduplication pass. This commit only goes slightly further by doing the
same check for all indexes, even indexes where deduplication won't be
performed.
We don't completely remove the BTP_HAS_GARBAGE flag. We still rely on
it as a gating condition with pg_upgrade'd indexes from before B-tree
version 4/PostgreSQL 12. That makes sense because we sometimes have to
make a choice among pages full of duplicates when inserting a tuple with
pre version 4 indexes. It probably still pays to avoid accessing the
line pointer array of a page there, since it won't yet be clear whether
we'll insert on to the page in question at all, let alone split it as a
result.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Victor Yegorov <vyegorov@gmail.com>
Discussion: https://postgr.es/m/CAH2-Wz%3DYpc1PDdk8OVJDChGJBjT06%3DA0Mbv9HyTLCsOknGcUFg%40mail.gmail.com
Stop naming special area/opaque pointer variables 'lpageop' in contexts
where it doesn't make sense. This is a holdover from a time when logic
that performs tasks that are now spread across _bt_insertonpg(),
_bt_findinsertloc(), and _bt_split() was more centralized. 'lpageop'
denotes "left page", which doesn't make sense outside of contexts in
which there isn't also a right page.
Also acquire page flag variables up front within _bt_insertonpg(). This
makes it closer to _bt_split() following refactoring commit bc3087b626.
This allows the page split and retail insert paths to both make use of
the same variables.
This commit changes the startup process in the standby server so that
it handles the interrupt signals after waiting for wal_retrieve_retry_interval
on the latch and resetting it, before entering another wait on the latch.
This change causes the standby server to promptly handle interrupt signals.
Otherwise, previously, there was the case where the standby needs to
wait extra five seconds to shutdown when the shutdown request arrived
while the startup process was waiting for wal_retrieve_retry_interval
on the latch.
Author: Fujii Masao, but implementation idea is from Soumyadeep Chakraborty
Reviewed-by: Soumyadeep Chakraborty
Discussion: https://postgr.es/m/9d7e6ab0-8a53-ddb9-63cd-289bcb25fe0e@oss.nttdata.com
Only a basic logic bug in a _bt_insertonpg() caller could lead to a
violation of this invariant (index corruption won't do it). A "can't
happen" error seems inappropriate (it is arbitrary at best).
Demote the error to a simple assertion. This matches similar nearby
sanity checks.
Introduce TimestampDifferenceMilliseconds() to simplify callers
that would rather have the difference in milliseconds, instead of
the select()-oriented seconds-and-microseconds format. This gets
rid of at least one integer division per call, and it eliminates
some apparently-easy-to-mess-up arithmetic.
Two of these call sites were in fact wrong:
* pg_prewarm's autoprewarm_main() forgot to multiply the seconds
by 1000, thus ending up with a delay 1000X shorter than intended.
That doesn't quite make it a busy-wait, but close.
* postgres_fdw's pgfdw_get_cleanup_result() thought it needed to compute
microseconds not milliseconds, thus ending up with a delay 1000X longer
than intended. Somebody along the way had noticed this problem but
misdiagnosed the cause, and imposed an ad-hoc 60-second limit rather
than fixing the units. This was relatively harmless in context, because
we don't care that much about exactly how long this delay is; still,
it's wrong.
There are a few more callers of TimestampDifference() that don't
have a direct need for seconds-and-microseconds, but can't use
TimestampDifferenceMilliseconds() either because they do need
microsecond precision or because they might possibly deal with
intervals long enough to overflow 32-bit milliseconds. It might be
worth inventing another API to improve that, but that seems outside
the scope of this patch; so those callers are untouched here.
Given the fact that we are fixing some bugs, and the likelihood
that future patches might want to back-patch code that uses this
new API, back-patch to all supported branches.
Alexey Kondratov and Tom Lane
Discussion: https://postgr.es/m/3b1c053a21c07c1ed5e00be3b2b855ef@postgrespro.ru
Remove a CHECK_FOR_INTERRUPTS() call that could never actually handle an
interrupt. We always have a heap page buffer lock at this point.
Having a useless CHECK_FOR_INTERRUPTS() call is harmless but misleading.
It is probably possible to work around the immediate problem by moving
the CHECK_FOR_INTERRUPTS() to before the heap page buffer lock is
acquired. That isn't enough to make the function responsive to
interrupts, though. The index AM caller will still hold an exclusive
buffer lock of its own.
Specifically, this blocks DECLARE ... WITH HOLD and firing of deferred
triggers within index expressions and materialized view queries. An
attacker having permission to create non-temp objects in at least one
schema could execute arbitrary SQL functions under the identity of the
bootstrap superuser. One can work around the vulnerability by disabling
autovacuum and not manually running ANALYZE, CLUSTER, REINDEX, CREATE
INDEX, VACUUM FULL, or REFRESH MATERIALIZED VIEW. (Don't restore from
pg_dump, since it runs some of those commands.) Plain VACUUM (without
FULL) is safe, and all commands are fine when a trusted user owns the
target object. Performance may degrade quickly under this workaround,
however. Back-patch to 9.5 (all supported versions).
Reviewed by Robert Haas. Reported by Etienne Stalmans.
Security: CVE-2020-25695
The description of how LP_DEAD bit setting by index scans works
following commit 2ed5b87f was rather unclear. Clean that up a bit.
Also refer to LP_DEAD bit setting within _bt_check_unique() at the start
of the same section. This mechanism may actually be more important than
the generic kill_prior_tuple mechanism that the section focuses on, so
it at least deserves to be mentioned in passing.
* Avoid pointlessly highlighting that an index vacuum was executed by a
parallel worker; user doesn't care.
* Don't give the impression that a non-concurrent reindex of an invalid
index on a TOAST table would work, because it wouldn't.
* Add a "translator:" comment for a mysterious message.
Discussion: https://postgr.es/m/20201107034943.GA16596@alvherre.pgsql
Reviewed-by: Michael Paquier <michael@paquier.xyz>
brin_form_tuple failed to consider the values may be toasted, inserting
the toast pointer into the index. This may easily result in index
corruption, as the toast data may be deleted and cleaned up by vacuum.
The cleanup however does not care about indexes, leaving invalid toast
pointers behind, which triggers errors like this:
ERROR: missing chunk number 0 for toast value 16433 in pg_toast_16426
A less severe consequence are inconsistent failures due to the index row
being too large, depending on whether brin_form_tuple operated on plain
or toasted version of the row. For example
CREATE TABLE t (val TEXT);
INSERT INTO t VALUES ('... long value ...')
CREATE INDEX idx ON t USING brin (val);
would likely succeed, as the row would likely include toast pointer.
Switching the order of INSERT and CREATE INDEX would likely fail:
ERROR: index row size 8712 exceeds maximum 8152 for index "idx"
because this happens before the row values are toasted.
The bug exists since PostgreSQL 9.5 where BRIN indexes were introduced.
So backpatch all the way back.
Author: Tomas Vondra
Reviewed-by: Alvaro Herrera
Backpatch-through: 9.5
Discussion: https://postgr.es/m/20201001184133.oq5uq75sb45pu3aw@development
Discussion: https://postgr.es/m/20201104010544.zexj52mlldagzowv%40development
wal_consistency_checking indicated an inconsistency in certain cases
involving nbtree page deletion. The underlying issue is that there was
a minor difference between the page image produced after a REDO routine
ran and the corresponding page image following original execution.
This harmless inconsistency has been around forever. We more or less
expect total consistency among even deleted nbtree pages these days,
though, so this won't do anymore.
To fix, tweak the REDO routine to match original execution.
Oversight in commit f47b5e13.
Logic for counting heap TIDs from posting list tuples (added by commit
0d861bbb) was faulty. It didn't count any TIDs/index tuples in the
event of no callback being set. This meant that we incorrectly counted
no index tuples in clean-up only VACUUMs, which could lead to
pg_class.reltuples being spuriously set to 0 in affected indexes.
To fix, go back to counting items from the page in cases where there is
no callback. This approach isn't very accurate, but it works well
enough in practice while avoiding the expense of accessing every index
tuple during cleanup-only VACUUMs.
Author: Peter Geoghegan <pg@bowt.ie>
Reported-By: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
https://postgr.es/m/20201023174451.69e358f1@firost
Backpatch: 13-, where nbtree deduplication was introduced
Commit dee663f7 intended to drop any queued up fsync requests before
unlinking segment files, but missed a code path. Fix, by centralizing
the forget-and-unlink code into a single function.
Reported-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
Discussion: https://postgr.es/m/20201104013205.icogbi773przyny5%40development
Commit ac22929a26 changed recoveryWakeupLatch so that it's reset to
NULL at the end of recovery. This change could cause a segmentation fault
in the buildfarm member 'elver'.
Previously the latch was reset to NULL after calling ShutdownWalRcv().
But there could be a window between ShutdownWalRcv() and the actual
exit of walreceiver. If walreceiver set the latch during that window,
the segmentation fault could happen.
To fix the issue, this commit changes walreceiver so that it sets
the latch only when the latch has not been reset to NULL yet.
Author: Fujii Masao
Discussion: https://postgr.es/m/5c1f8a85-747c-7bf9-241e-dd467d8a3586@iki.fi
This commit gets rid of the dedicated latch for signaling the startup
process in favor of using its procLatch, since that comports better
with possible generic signal handlers using that latch.
Commit 1e53fe0e70 changed background processes so that they use standard
SIGHUP handler. Like that, this commit also makes the startup process use
standard SIGHUP handler to simplify the code.
Author: Fujii Masao
Reviewed-by: Bharath Rupireddy, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACXPorUqePswDtOeM_s82v9RW32E1fYmOPZ5NuE+TWKj_A@mail.gmail.com
Some places were using PG_GETARG_UINT32 where PG_GETARG_TRANSACTIONID
would be more appropriate. (Of course, they are the same internally,
so there is no externally visible effect.) To do that, export
PG_GETARG_TRANSACTIONID outside of xid.c. We also export
PG_RETURN_TRANSACTIONID for symmetry, even though there are currently
no external users.
Author: Ashutosh Bapat <ashutosh.bapat@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/d8f6bdd536df403b9b33816e9f7e0b9d@G08CNEXMBPEKD05.g08.fujitsu.local
Certain background workers initiate parallel queries while
debug_query_string==NULL, at which point they attempted strlen(NULL) and
died to SIGSEGV. Older debug_query_string observers allow NULL, so do
likewise in these newer ones. Back-patch to v11, where commit
7de4a1bcc5 introduced the first of these.
Discussion: https://postgr.es/m/20201014022636.GA1962668@rfd.leadboat.com
Because of this, if you tried to create an operator family with the new
sortsupport function, you got an error:
ERROR: support function number 11 is invalid for access method gist
We missed this in commit 16fa9b2b30 that added the sortsupport function,
because it only added sortsupport to a built-in operator family.
Author: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/3520A18A-5C38-4697-A2E3-F3BDE3496CD5%40yandex-team.ru
This fixes a bug in the edge case where, for a temp table, heap_page_prune()
can end up with a different horizon than heap_vacuum_rel(). Which can trigger
errors like "ERROR: cannot freeze committed xmax ...".
The bug was introduced due to interaction of a7212be8b9 "Set cutoff xmin more
aggressively when vacuuming a temporary table." with dc7420c2c9 "snapshot
scalability: Don't compute global horizons while building snapshots.".
The problem is caused by lazy_scan_heap() assuming that the only reason its
HeapTupleSatisfiesVacuum() call would return HEAPTUPLE_DEAD is if the tuple is
a HOT tuple, or if the tuple's inserting transaction has aborted since the
heap_page_prune() call. But after a7212be8b9 that was also possible in other
cases for temp tables, because heap_page_prune() uses a different visibility
test after dc7420c2c9.
The fix is fairly simple: Move the special case logic for temp tables from
vacuum_set_xid_limits() to the infrastructure introduced in dc7420c2c9. That
ensures that the horizon used for pruning is at least as aggressive as the one
used by lazy_scan_heap(). The concrete horizon used for temp tables is
slightly different than the logic in dc7420c2c9, but should always be as
aggressive as before (see comments).
A significant benefit to centralizing the logic procarray.c is that now the
more aggressive horizons for temp tables does not just apply to VACUUM but
also to e.g. HOT pruning and the nbtree killtuples logic.
Because isTopLevel is not needed by vacuum_set_xid_limits() anymore, I
undid the the related changes from a7212be8b9.
This commit also adds an isolation test ensuring that the more aggressive
vacuuming and pruning of temp tables keeps working.
Debugged-By: Amit Kapila <amit.kapila16@gmail.com>
Debugged-By: Tom Lane <tgl@sss.pgh.pa.us>
Debugged-By: Ashutosh Sharma <ashu.coek88@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20201014203103.72oke6hqywcyhx7s@alap3.anarazel.de
Discussion: https://postgr.es/m/20201015083735.derdzysdtqdvxshp@alap3.anarazel.de
Pavan Deolasee recently noted that a few of the
HeapTupleHeaderIndicatesMovedPartitions calls added by commit
5db6df0c01 are useless, since they are done after comparing t_self
with t_ctid. But because t_self can never be set to the magical values
that indicate that the tuple moved partition, this can never succeed: if
the first test fails (so we know t_self equals t_ctid), necessarily the
second test will also fail.
So these checks can be removed and no harm is done.
Discussion: https://postgr.es/m/20200929164411.GA15497@alvherre.pgsql
A number of places were using appendStringInfo() when they could have been
using appendStringInfoString() instead. While there's no functionality
change there, it's just more efficient to use appendStringInfoString()
when no formatting is required. Likewise for some
appendStringInfoString() calls which were just appending a single char.
We can just use appendStringInfoChar() for that.
Additionally, many places were using appendPQExpBuffer() when they could
have used appendPQExpBufferStr(). Change those too.
Patch by Zhijie Hou, but further searching by me found significantly more
places that deserved the same treatment.
Author: Zhijie Hou, David Rowley
Discussion: https://postgr.es/m/cb172cf4361e4c7ba7167429070979d4@G08CNEXMBPEKD05.g08.fujitsu.local
gistRelocateBuildBuffersOnSplit did not get the memo about which
attribute count to use. This could lead to a crash if there were
included columns and buffering build was chosen. (Because there
are random page-split decisions elsewhere in GiST index build,
the crashes are not entirely deterministic.)
Back-patch to v12 where GiST gained support for included columns.
Pavel Borisov
Discussion: https://postgr.es/m/CALT9ZEECCV5m7wvxg46PC-7x-EybUmnpupBGhSFMoAAay+r6HQ@mail.gmail.com
Commit 16fa9b2b3 broke the ability to reliably test GiST buffered builds,
because it caused sorted builds to be done instead if sortsupport is
available, regardless of any attempt to override that. While a would-be
test case could try to work around that by choosing an opclass that has
no sortsupport function, coverage would be silently lost the moment
someone decides it'd be a good idea to add a sortsupport function.
Hence, rearrange the logic in gistbuild() so that if "buffering = on"
is specified in CREATE INDEX, we will use that method, sortsupport or no.
Also document the interaction between sorting and the buffering
parameter, as 16fa9b2b3 failed to do.
(Note that in fact we still lack any test coverage of buffered builds,
but this is a prerequisite to adding a non-fragile test.)
Discussion: https://postgr.es/m/3249980.1602532990@sss.pgh.pa.us
This view shows the statistics about WAL activity. Currently it has only
two columns: wal_buffers_full and stats_reset. wal_buffers_full column
indicates the number of times WAL data was written to the disk because
WAL buffers got full. This information is useful when tuning wal_buffers.
stats_reset column indicates the time at which these statistics were
last reset.
pg_stat_wal view is also the basic infrastructure to expose other
various statistics about WAL activity later.
Bump PGSTAT_FILE_FORMAT_ID due to the change in pgstat format.
Bump catalog version.
Author: Masahiro Ikeda
Reviewed-by: Takayuki Tsunakawa, Kyotaro Horiguchi, Amit Kapila, Fujii Masao
Discussion: https://postgr.es/m/188bd3f2d2233cf97753b5ced02bb050@oss.nttdata.com
Providing this information can be useful for example when diagnosing
problems related to recovery conflicts or for recovery issues without
having to go through the output generated by pg_waldump to get some
information about the blocks a WAL record works on.
The block information is printed in the same format as pg_waldump. This
already existed in xlog.c for debugging purposes with -DWAL_DEBUG, so
adding the block information in the callback has required just a small
refactoring.
Author: Bertrand Drouvot
Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/c31e2cba-efda-762c-f4ad-5c25e5dac3d0@amazon.com
This is not strictly necessary, as the right-links are only needed by
scans that are concurrent with page splits, and neither scans or page
splits can happen during sorted index build. But it seems like a good
idea to set them anyway, if we e.g. want to add a check to amcheck in
the future to verify that the chain of right-links is complete.
Author: Andrey Borodin
Discussion: https://www.postgresql.org/message-id/4D68C21F-9FB9-41DA-B663-FDFC8D143788%40yandex-team.ru
Previously, we called fsync() after writing out individual pg_xact,
pg_multixact and pg_commit_ts pages due to cache pressure, leading to
regular I/O stalls in user backends and recovery. Collapse requests for
the same file into a single system call as part of the next checkpoint,
as we already did for relation files, using the infrastructure developed
by commit 3eb77eba. This can cause a significant improvement to
recovery performance, especially when it's otherwise CPU-bound.
Hoist ProcessSyncRequests() up into CheckPointGuts() to make it clearer
that it applies to all the SLRU mini-buffer-pools as well as the main
buffer pool. Rearrange things so that data collected in CheckpointStats
includes SLRU activity.
Also remove the Shutdown{CLOG,CommitTS,SUBTRANS,MultiXact}() functions,
because they were redundant after the shutdown checkpoint that
immediately precedes them. (I'm not sure if they were ever needed, but
they aren't now.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (parts)
Tested-by: Jakub Wartak <Jakub.Wartak@tomtom.com>
Discussion: https://postgr.es/m/CA+hUKGLJ=84YT+NvhkEEDAuUtVHMfQ9i-N7k_o50JmQ6Rpj_OQ@mail.gmail.com
Existing code used various inconsistent ways to printf struct stat's
st_size member. The type of that is off_t, which is in most cases a
signed 64-bit integer, so use the long long int format for it.
Harmonize behavior by moving reponsibility for fsyncing directories down
into slru.c. In 10 and later, only the multixact directories were
missed (see commit 1b02be21), and in older branches all SLRUs were
missed.
Back-patch to all supported releases.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGLtsTUOScnNoSMZ-2ZLv%2BwGh01J6kAo_DM8mTRq1sKdSQ%40mail.gmail.com
Since we're bypassing the buffer manager, we need to call
PageSetChecksumInplace() directly. As reported by Justin Pryzby.
In the passing, add RelationOpenSmgr() calls before all smgrwrite() and
smgrextend() calls. Tom added one before the first smgrextend() call in
commit c2bb287025, which seems to be enough, but let's play it safe and
do it before each one. That's how it's done in the similar code in
nbtsort.c, too.
Discussion: https://www.postgresql.org/message-id/20200920224446.GF30557@telsasoft.com
After commits 85f6b49c2c and 3ba59ccc89, we can allow parallel inserts
which was earlier not possible as parallel group members won't conflict
for relation extension and page lock. In those commits, we forgot to
update comments at few places.
Author: Amit Kapila
Reviewed-by: Robert Haas and Dilip Kumar
Backpatch-through: 13
Discussion: https://postgr.es/m/CAFiTN-tMrQh5FFMPx5aWJ+1gi1H6JxktEhq5mDwCHgnEO5oBkA@mail.gmail.com
For parallel btree scan to work for array of scan keys, it should reach
BTPARALLEL_DONE state once for every distinct combination of array keys.
This is required to ensure that the parallel workers don't try to seize
blocks at the same time for different scan keys. We missed to update this
state when we discovered that the scan keys can't be satisfied.
Author: James Hunter
Reviewed-by: Amit Kapila
Tested-by: Justin Pryzby
Backpatch-through: 10, where it was introduced
Discussion: https://postgr.es/m/4248CABC-25E3-4809-B4D0-128E1BAABC3C@amazon.com
