implied by the predicate of a partial index being used to scan a table.
However, this optimization is unsafe in an UPDATE, DELETE, or SELECT FOR
UPDATE query, because the quals need to be rechecked by EvalPlanQual if
there's an update conflict. Per example from Jean-Samuel Reynaud.
transaction_timestamp() (just like now()).
Also update statement_timeout() to mention it is statement arrival time
that is measured.
Catalog version updated.
not named ones, and replace linear searches of the list with array indexing.
The named-parameter support has been dead code for many years anyway,
and recent profiling suggests that the searching was costing a noticeable
amount of performance for complex queries.
to track the number of LWLock acquisitions and the number of times we
block waiting for an LWLock, on a per-process basis. After having needed
this twice in the past few months, seems like it should go into CVS.
of rejecting palloc(0). Also, tweak like_selectivity() to avoid assuming
the presented pattern is nonempty; although that assumption is valid,
it doesn't really help much, and the new coding is more correct anyway
since it properly handles redundant wildcards. In combination these
changes should eliminate a Coverity warning noted by Martijn.
whenever we start to read within that file. The first page carries
extra identification information that really ought to be checked, but
as the code stood, this was only checked when we switched sequentially
into a new WAL file, or if by chance the starting checkpoint record was
within the first page. This patch ensures that we will detect bogus
'long header' information before we start replaying the WAL sequence.
8.0), and add as suggestion to use log_min_error_statement for this
purpose. I also fixed the code so the first EXECUTE has it's prepare,
rather than the last which is what was in the current code. Also remove
"protocol" prefix for SQL EXECUTE output because it is not accurate.
Backpatch to 8.1.X.
to occur between pg_start_backup() and pg_stop_backup(), even if the GUC
setting full_page_writes is OFF. Per discussion, doing this in combination
with the already-existing checkpoint during pg_start_backup() should ensure
safety against partial page updates being included in the backup. We do
not have to force full page writes to occur during normal PITR operation,
as I had first feared.
CREATE AGGREGATE aggname (input_type) (parameter_list)
along with the old syntax where the input type was named in the parameter
list. This fits more naturally with the way that the aggregate is identified
in DROP AGGREGATE and other utility commands; furthermore it has a natural
extension to handle multiple-input aggregates, where the basetype-parameter
method would get ugly. In fact, this commit fixes the grammar and all the
utility commands to support multiple-input aggregates; but DefineAggregate
rejects it because the executor isn't fixed yet.
I didn't do anything about treating agg(*) as a zero-input aggregate instead
of artificially making it a one-input aggregate, but that should be considered
in combination with supporting multi-input aggregates.
update no-longer-existing pages to fall through as no-ops, but make a note
of each page number referenced by such records. If we don't see a later
XLOG entry dropping the table or truncating away the page, complain at
the end of XLOG replay. Since this fixes the known failure mode for
full_page_writes = off, revert my previous band-aid patch that disabled
that GUC variable.
If a process abandons a wait in LockBufferForCleanup (in practice,
only happens if someone cancels a VACUUM) just before someone else
sends it a signal indicating the buffer is available, it was possible
for the wakeup to remain in the process' semaphore, causing misbehavior
next time the process waited for an lmgr lock. Rather than try to
prevent the race condition directly, it seems best to make the lock
manager robust against leftover wakeups, by having it repeat waiting
on the semaphore if the lock has not actually been granted or denied
yet.
alternatives ("|" symbol). The original coding allowed the added ^ and $
constraints to be absorbed into the first and last alternatives, producing
a pattern that would match more than it should. Per report from Eric Noriega.
I also changed the pattern to add an ARE director ("***:"), ensuring that
SIMILAR TO patterns do not change behavior if regex_flavor is changed. This
is necessary to make the non-capturing parentheses work, and seems like a
good idea on general principles.
Back-patched as far as 7.4. 7.3 also has the bug, but a fix seems impractical
because that version's regex engine doesn't have non-capturing parens.
upper-level insertion completes a previously-seen split, we cannot simply grab
the downlink block number out of the buffer, because the buffer could contain
a later state of the page --- or perhaps the page doesn't even exist at all
any more, due to relation truncation. These possibilities have been masked up
to now because the use of full_page_writes effectively ensured that no xlog
replay routine ever actually saw a page state newer than its own change.
Since we're deprecating full_page_writes in 8.1.*, there's no need to fix this
in existing release branches, but we need a fix in HEAD if we want to have any
hope of re-allowing full_page_writes. Accordingly, adjust the contents of
btree WAL records so that we can always get the downlink block number from the
WAL record rather than having to depend on buffer contents. Per report from
Kevin Grittner and Peter Brant.
Improve a few comments in related code while at it.
had a bad side-effect: it stopped finding plans that involved BitmapAnd
combinations of indexscans using both join and non-join conditions. Instead,
make choose_bitmap_and more aggressive about detecting redundancies between
BitmapOr subplans.
at least one join condition as an indexqual. Before bitmap indexscans, this
oversight didn't really cost much except for redundantly considering the
same join paths twice; but as of 8.1 it could result in silly bitmap scans
that would do the same BitmapOr twice and then BitmapAnd these together :-(
when trying to locate the referent of a RECORD variable. This fixes the
'record type has not been registered' failure reported by Stefan
Kaltenbrunner about a month ago. A side effect of the way I chose to
fix it is that most variable references in join conditions will now be
properly labeled with the variable's source table name, instead of the
not-too-helpful 'outer' or 'inner' we used to use.
output, ie, no OR immediately below an OR. Otherwise we get Asserts or
wrong answers for cases such as
select * from tenk1 a, tenk1 b
where (a.ten = b.ten and (a.unique1 = 100 or a.unique1 = 101))
or (a.hundred = b.hundred and a.unique1 = 42);
Per report from Rafael Martinez Guerrero.
Per recent discussion, this seems to be making the stats less accurate
rather than more so, particularly on Windows where PID values may be
reused very quickly. Patch by Peter Brant.
that apply the necessary domain constraint checks immediately. This fixes
cases where domain constraints went unchecked for statement parameters,
PL function local variables and results, etc. We can also eliminate existing
special cases for domains in places that had gotten it right, eg COPY.
Also, allow domains over domains (base of a domain is another domain type).
This almost worked before, but was disallowed because the original patch
hadn't gotten it quite right.
XLOG_BLCKSZ. This ought to help in preventing configuration mismatch
problems if anyone tries to ship PITR files between servers compiled
with different XLOG_BLCKSZ settings. Simon Riggs
instead a dedicated symbol. This probably makes no functional difference
for likely values of BLCKSZ, but it makes the intent clearer.
Simon Riggs, minor editorialization by Tom Lane.
functions are not strict, they will be called (passing a NULL first parameter)
during any attempt to input a NULL value of their datatype. Currently, all
our input functions are strict and so this commit does not change any
behavior. However, this will make it possible to build domain input functions
that centralize checking of domain constraints, thereby closing numerous holes
in our domain support, as per previous discussion.
While at it, I took the opportunity to introduce convenience functions
InputFunctionCall, OutputFunctionCall, etc to use in code that calls I/O
functions. This eliminates a lot of grotty-looking casts, but the main
motivation is to make it easier to grep for these places if we ever need
to touch them again.
used within WAL files. Historically this was the same as the data file
BLCKSZ, but there's no necessary connection, and it's possible that
performance gains might ensue from reducing XLOG_BLCKSZ. In any case
distinguishing two symbols should improve code clarity. This commit
does not actually change the page size, only provide the infrastructure
to make it possible to do so. initdb forced because of addition of a
field to pg_control.
Mark Wong, with some help from Simon Riggs and Tom Lane.
incrementally by successive inserts rather than by sorting the data.
We were only using the slow path during bootstrap, apparently because
when first written it failed during bootstrap --- but it works fine now
AFAICT. Removing it saves a hundred or so lines of code and produces
noticeably (~10%) smaller initial states of the system catalog indexes.
While that won't make much difference for heavily-modified catalogs,
for the more static ones there may be a useful long-term performance
improvement.
misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
torn-page problems. This introduces some issues of its own, mainly
that there are now some critical sections of unreasonably broad scope,
but it's a step forward anyway. Further cleanup will require some
code refactoring that I'd prefer to get Oleg and Teodor involved in.
startup or recovery process. Since such a process isn't a real backend,
pgstat.c gets confused. This accounts for recent reports of strange
"invalid server process ID -1" log messages during crash recovery.
There isn't any point in attempting to make the report, since we'll discard
stats in such scenarios anyhow.
This commit doesn't make much functional change, but it does eliminate some
duplicated code --- for instance, PageIsNew tests are now done inside
XLogReadBuffer rather than by each caller.
The GIST xlog code still needs a lot of love, but I'll worry about that
separately.
have symlinks (ie, Windows). Although it'll never be called on to do anything
useful during normal operation on such a platform, it's still needed to
re-create dropped directories during WAL replay.
failures even when the hardware and OS did nothing wrong. Per recent analysis
of a problem report from Alex Bahdushka.
For the moment I've just diked out the test of the parameter, rather than
removing the GUC infrastructure and documentation, in case we conclude that
there's something salvageable there. There seems no chance of it being
resurrected in the 8.1 branch though.
passed extend = true whenever we are reading a page we intend to reinitialize
completely, even if we think the page "should exist". This is because it
might indeed not exist, if the relation got truncated sometime after the
current xlog record was made and before the crash we're trying to recover
from. These two thinkos appear to explain both of the old bug reports
discussed here:
http://archives.postgresql.org/pgsql-hackers/2005-05/msg01369.php
tuples as needed "to keep VACUUM from complaining", but actually there is
a more compelling reason to do it: failure to do so violates MVCC semantics.
This is because a pre-existing serializable transaction might try to use
the index after we finish (re)building it, and it might fail to find tuples
it should be able to see. We got this mostly right, but not in the case
of partial indexes: the code mistakenly discarded recently-dead tuples for
partial indexes. Fix that, and adjust the comments.
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou