int2-and-int8 implementations of the basic arithmetic operators +, -, *, /.
This doesn't really add any new functionality, but it avoids "operator is not
unique" failures that formerly occurred in these cases because the parser
couldn't decide whether to promote the int2 to int4 or int8. We could
alternatively have removed the existing cross-type operators, but
experimentation shows that the cost of an additional type coercion expression
node is noticeable compared to such cheap operators; so let's not give up any
performance here. On the other hand, I removed the int2-and-int4 modulo (%)
operators since they didn't seem as important from a performance standpoint.
Per a complaint last January from ykhuang.
that it depends on for replan-forcing purposes. We need to consider plain OID
constants too, because eval_const_expressions folds a RelabelType atop a Const
to just a Const. This change could result in OID values that aren't really
for tables getting added to the dependency list, but the worst-case
consequence would be occasional useless replans. Per report from Gabriele
Messineo.
is necessary to avoid deadlock against ordinary queries, but we'd broken it
with recent changes that made the DROP machinery lock the index before
arriving at index_drop. Per intermittent buildfarm failures.
grammar allows ALTER TABLE/INDEX/SEQUENCE/VIEW interchangeably for all
subforms of those commands, and then we sort out what's really legal
at execution time. This allows the ALTER SEQUENCE/VIEW reference pages
to fully document all the ALTER forms available for sequences and views
respectively, and eliminates a longstanding cause of confusion for users.
The net effect is that the following forms are allowed that weren't before:
ALTER SEQUENCE OWNER TO
ALTER VIEW ALTER COLUMN SET/DROP DEFAULT
ALTER VIEW OWNER TO
ALTER VIEW SET SCHEMA
(There's no actual functionality gain here, but formerly you had to say
ALTER TABLE instead.)
Interestingly, the grammar tables actually get smaller, probably because
there are fewer special cases to keep track of.
I did not disallow using ALTER TABLE for these operations. Perhaps we
should, but there's a backwards-compatibility issue if we do; in fact
it would break existing pg_dump scripts. I did however tighten up
ALTER SEQUENCE and ALTER VIEW to reject non-sequences and non-views
in the new cases as well as a couple of cases where they didn't before.
The patch doesn't change pg_dump to use the new syntaxes, either.
objects are specified, we drop them all in a single performMultipleDeletions
call. This makes the RESTRICT/CASCADE checks more relaxed: it's not counted
as a cascade if one of the later objects has a dependency on an earlier one.
NOTICE messages about such cases go away, too.
In passing, fix the permissions check for DROP CONVERSION, which for some
reason was never made role-aware, and omitted the namespace-owner exemption
too.
Alex Hunsaker, with further fiddling by me.
the problem happened in. These are all supposedly can't-happen cases, but
when they do happen it's useful to know where.
Back-patch to 8.3, but not further because the patch doesn't apply cleanly
further back. Given the lack of response to my proposal of this, there
doesn't seem to be enough interest to justify much back-porting effort.
forks. XLogOpenRelation() and the associated light-weight relation cache in
xlogutils.c is gone, and XLogReadBuffer() now takes a RelFileNode as argument,
instead of Relation.
For functions that still need a Relation struct during WAL replay, there's a
new function called CreateFakeRelcacheEntry() that returns a fake entry like
XLogOpenRelation() used to.
devised for pg_shdepend, namely the individual dependencies are reported as
DETAIL lines rather than coming out as separate NOTICEs. The client-side
report is capped at 100 lines, but the server log always gets a full report.
CacheInvalidateRelcache() crashes if called in WAL recovery, because the
invalidation infrastructure hasn't been initialized yet.
Back-patch to 8.2, where the bug was introduced.
algorithm, replacing the original intention of a one-pass search, which
had been hacked up over time to be partially two-pass in hopes of handling
various corner cases better. It still wasn't quite there, especially as
regards emitting unwanted NOTICE messages. More importantly, this approach
lets us fix a number of open bugs concerning concurrent DROP scenarios,
because we can take locks during the first pass and avoid traversing to
dependent objects that were just deleted by someone else.
There is more that can be done here, but I'll go ahead and commit the
base patch before working on the options.
more logical that way, and also it reduces the amount of unnecessary includes
in bufpage.h, which is widely used.
Zdenek Kotala.
My previous patch to bufpage.h should also have credited him as author, but I
forgot (sorry about that).
patches that dealt with object ownership. It wasn't updating pg_shdepend
nor adjusting the aggregate's ACL. In 8.2 and up, fix this permanently
by making it use AlterFunctionOwner_oid. In 8.1, the function code wasn't
factored that way, so just copy and paste.
This is needed because :: casting binds more tightly than minus, so for
example -1::integer is not the same as (-1)::integer, and there are cases
where the difference is important. In particular this caused a failure
in SELECT DISTINCT ... ORDER BY ... where expressions that should have
matched were seen as different by the parser; but I suspect that there
could be other cases where failure to parenthesize leads to subtler
semantic differences in reloaded rules. Per report from Alexandr Popov.
the PARAM_FLAG_CONST flag on the parameters that are passed into the portal,
while the former's behavior is unchanged. This should only affect the case
where the portal is executing an EXPLAIN; it will cause the generated plan to
look more like what would be generated if the portal were actually executing
the command being explained. Per gripe from Pavel.
This is required on Windows due to the special locale
handling for UTF8 that doesn't change the full environment.
Fixes crash with translated error messages per bugs 4180
and 4196.
Tom Lane
the associated datatype as their equality member. This means that these
opclasses can now support plain equality comparisons along with LIKE tests,
thus avoiding the need for an extra index in some applications. This
optimization was not possible when the pattern opclasses were first introduced,
because we didn't insist that text equality meant bitwise equality; but we
do now, so there is no semantic difference between regular and pattern
equality operators.
I removed the name_pattern_ops opclass altogether, since it's really useless:
name's regular comparisons are just strcmp() and are unlikely to become
something different. Instead teach indxpath.c that btree name_ops can be
used for LIKE whether or not the locale is C. This might lead to a useful
speedup in LIKE queries on the system catalogs in non-C locales.
The ~=~ and ~<>~ operators are gone altogether. (It would have been nice to
keep them for backward compatibility's sake, but since the pg_amop structure
doesn't allow multiple equality operators per opclass, there's no way.)
A not-immediately-obvious incompatibility is that the sort order within
bpchar_pattern_ops indexes changes --- it had been identical to plain
strcmp, but is now trailing-blank-insensitive. This will impact
in-place upgrades, if those ever happen.
Per discussions a couple months ago.
called before, not after, calling the assign_hook if any. This is because
push_old_value might fail (due to palloc out-of-memory), and in that case
there would be no stack entry to tell transaction abort to undo the GUC
assignment. Of course the actual assignment to the GUC variable hasn't
happened yet --- but the assign_hook might have altered subsidiary state.
Without a stack entry we won't call it again to make it undo such actions.
So this is necessary to make the world safe for assign_hooks with side
effects. Per a discussion a couple weeks ago with Magnus.
Back-patch to 8.0. 7.x did not have the problem because it did not have
allocatable stacks of GUC values.
to go beoynd 10MB, as demonstrated by Gavin Sharry's example of dropping a
schema with ~25000 objects. The really bogus thing about the limit was that
it was enforced when a state file file was read in, not when it was written,
so you would end up with a prepared transaction that you can't commit or
abort, and the only recourse was to shut down the server and remove the file
by hand.
Raise the limit to MaxAllocSize, and enforce it also when a state file is
written. We could've removed the limit altogether, but reading in a file
larger than MaxAllocSize would fail anyway because we read it into a
palloc'd buffer.
Backpatch down to 8.1, where 2PC and this issue was introduced.
Formerly, the default value of wal_sync_method was determined inside xlog.c,
but now it is determined inside guc.c. guc.c was reading xlogdefs.h
without having read <fcntl.h>, leading to wrong determination of
DEFAULT_SYNC_METHOD. Obviously xlogdefs.h needs to include <fcntl.h>
for itself to ensure stable results.
sequence to be reset to its original starting value. This requires adding the
original start value to the set of parameters (columns) of a sequence object,
which is a user-visible change with potential compatibility implications;
it also forces initdb.
Also add hopefully-SQL-compatible RESTART/CONTINUE IDENTITY options to
TRUNCATE TABLE. RESTART IDENTITY executes ALTER SEQUENCE RESTART for all
sequences "owned by" any of the truncated relations. CONTINUE IDENTITY is
a no-op option.
Zoltan Boszormenyi
functions.
Note that because this patch changes FmgrInfo, any external C functions
you might be testing with 8.4 will need to be recompiled.
Patch by Martin Pihlak, some editorialization by me (principally, removing
tracking of getrusage() numbers)
file portability/instr_time.h, and add a couple more macros to eliminate
some abstraction leakage we formerly had. Also update psql to use this
header instead of its own copy of nearly the same code.
This commit in itself is just code cleanup and shouldn't change anything.
It lays some groundwork for the upcoming function-stats patch, though.
modes, replacing it with a call to a function that derives it from the
sync_method variable, now that it has distinct values for these two cases.
This means that assign_xlog_sync_method() no longer changes any settings,
thus fixing the bug introduced in the change to use a guc enum for
wal_sync_method.
There are two ways to track a snapshot: there's the "registered" list, which
is used for arbitrary long-lived snapshots; and there's the "active stack",
which is used for the snapshot that is considered "active" at any time.
This also allows users of snapshots to stop worrying about snapshot memory
allocation and freeing, and about using PG_TRY blocks around ActiveSnapshot
assignment. This is all done automatically now.
As a consequence, this allows us to reset MyProc->xmin when there are no
more snapshots registered in the current backend, reducing the impact that
long-running transactions have on VACUUM.
unnecessary #include lines in it. Also, move some tuple routine prototypes and
macros to htup.h, which allows removal of heapam.h inclusion from some .c
files.
For this to work, a new header file access/sysattr.h needed to be created,
initially containing attribute numbers of system columns, for pg_dump usage.
While at it, make contrib ltree, intarray and hstore header files more
consistent with our header style.
as those for inherited columns; that is, it's no longer allowed for a child
table to not have a check constraint matching one that exists on a parent.
This satisfies the principle of least surprise (rows selected from the parent
will always appear to meet its check constraints) and eliminates some
longstanding bogosity in pg_dump, which formerly had to guess about whether
check constraints were really inherited or not.
The implementation involves adding conislocal and coninhcount columns to
pg_constraint (paralleling attislocal and attinhcount in pg_attribute)
and refactoring various ALTER TABLE actions to be more like those for
columns.
Alex Hunsaker, Nikhil Sontakke, Tom Lane
parameter. This fixes bug 4137 reported by Wojciech Strzalka, where a WAL
file is deleted too early when starting the recovery of a warm standby server.
Also add a sanity check in pg_standby so that it will refuse to delete anything
earlier than the file being restored, and improve the debug message in case
nothing is deleted.
Simon Riggs. Backpatch to 8.3, which is where %r was introduced.
instead of calling a bunch of individual functions.
This function can also be called directly, taking a PID as an argument, to
return only the data for a single PID.
These changes assume that the varchar and xml data types are represented
the same as text. (I did not, however, accept the portions of the proposed
patch that wanted to assume bytea is the same as text --- tgl.)
Brendan Jurd
support for a nonsegmented mode from md.c. Per recent discussions, there
doesn't seem to be much value in a "never segment" option as opposed to
segmenting with a suitably large segment size. So instead provide a
configure-time switch to set the desired segment size in units of gigabytes.
While at it, expose a configure switch for BLCKSZ as well.
Zdenek Kotala
it vary with BLCKSZ as before. This agrees with what the documentation says,
and avoids a regression test problem when BLCKSZ is larger than default.
Per recent discussion.
a user-supplied TID is out of range for the relation. This is needed to
preserve compatibility with our pre-8.3 behavior, and it is sensible anyway
since if the query were implemented by brute force rather than optimized
into a TidScan, the behavior for a non-existent TID would be zero rows out,
never an error. Per gripe from Gurjeet Singh.
do CancelBackup at a sane place, fix some oversights in the state transitions,
allow only superusers to connect while we are waiting for backup mode to end.
flags by separate AT_SetNotNull subcommands. That was always ugly and
inefficient, and it's now clear that it was merely a partial workaround
for the bug just identified in ATExecAddColumn. This is just code
beautification not a bug fix, so no back-patch.
Brendan Jurd, with some trivial additional cleanup by me.
checked to see if it's been initialized to all non-nulls. The implicit NOT
NULL constraint was not being checked during the ALTER (in fact, not even if
there was an explicit NOT NULL too), because ATExecAddColumn neglected to
set the flag needed to make the test happen. This has been broken since
the capability was first added, in 8.0.
Brendan Jurd, per a report from Kaloyan Iliev.
have pg_ctl warn about this.
Cancel running online backups (by renaming the backup_label file,
thus rendering the backup useless) when shutting down in fast mode.
Laurenz Albe
<craig@postnewspapers.com.au>.
It was my mistake, I missed limitation of number of held locks, now GIN doesn't
use continiuous locks, but still hold buffers pinned to prevent interference
with vacuum's deletion algorithm.
Backpatch is needed.
ordinary expressions. This probably doesn't catch every single case
where you might get "cache lookup failed for function 0" for use of a
shell operator, but it will catch most. Per bug #4120 from Pedro Gimeno.
This patch incidentally folds make_op_expr() into its sole remaining
caller --- the alternative was to give it yet more arguments, which
didn't seem an improvement.
output is not of the same type that's needed for the IN comparison (ie,
where the parser inserted an implicit coercion above the subselect result).
We should record the coerced expression, not just a raw Var referencing
the subselect output, as the quantity that needs to be unique-ified if
we choose to implement the IN as Unique followed by a plain join.
As of 8.3 this error was causing crashes, as seen in bug #4113 from Javier
Hernandez, because the executor was being told to hash or sort the raw
subselect output column using operators appropriate to the coerced type.
In prior versions there was no crash because the executor chose the
hash or sort operators for itself based on the column type it saw.
However, that's still not really right, because what's unique for one data
type might not be unique for another. In corner cases we could get multiple
outputs of a row that should appear only once, as demonstrated by the
regression test case included in this commit.
However, this patch doesn't apply cleanly to 8.2 or before, and the code
involved has shifted enough over time that I'm hesitant to try to back-patch.
Given the lack of complaints from the field about such corner cases, I think
the bug may not be important enough to risk breaking other things with a
back-patch.
UPDATE/SHARE couldn't occur as a subquery in a query with a non-SELECT
top-level operation. Symptoms included outright failure (as in report from
Mark Mielke) and silently neglecting to take the requested row locks.
Back-patch to 8.3, because the visible failure in the INSERT ... SELECT case
is a regression from 8.2. I'm a bit hesitant to back-patch further given the
lack of field complaints.
where Datum is 8 bytes wide. Since this will break old-style C functions
(those still using version 0 calling convention) that have arguments or
results of these types, provide a configure option to disable it and retain
the old pass-by-reference behavior. Likewise, provide a configure option
to disable the recently-committed float4 pass-by-value change.
Zoltan Boszormenyi, plus configurability stuff by me.
I never understood why initial authors GiST in pgsql choose so
stgrange signature for 'same' method:
bool *sameFn(Datum a, Datum b, bool* result)
instead of simple, logical
bool sameFn(Datum a, Datum b)
This change will break any existing GiST extension, so we still live with
it and will live.
uses of the long-deprecated float32 in contrib/seg; the definitions themselves
are still there, but no longer used. fmgr/README updated to match.
I added a CREATE FUNCTION to account for existing seg_center() code in seg.c
too, and some tests for it and the neighbor functions. At the same time,
remove checks for NULL which are not needed (because the functions are declared
STRICT).
I had to do some adjustments to contrib's btree_gist too. The choices for
representation there are not ideal for changing the underlying types :-(
Original patch by Zoltan Boszormenyi, with some adjustments by me.
file; the idea is that we should clean up as much as we can, even if there's
some problem removing one file. Make the error messages a bit less misleading,
too. In passing, const-ify function arguments.
place to prevent reusing relation OIDs before next checkpoint, and DROP
DATABASE. First, if a database was dropped, bgwriter would still try to unlink
the files that the rmtree() call by the DROP DATABASE command has already
deleted, or is just about to delete. Second, if a database is dropped, and
another database is created with the same OID, bgwriter would in the worst
case delete a relation in the new database that happened to get the same OID
as a dropped relation in the old database.
To fix these race conditions:
- make rmtree() ignore ENOENT errors. This fixes the 1st race condition.
- make ForgetDatabaseFsyncRequests forget unlink requests as well.
- force checkpoint on in dropdb on all platforms
Since ForgetDatabaseFsyncRequests() is asynchronous, the 2nd change isn't
enough on its own to fix the problem of dropping and creating a database with
same OID, but forcing a checkpoint on DROP DATABASE makes it sufficient.
Per Tom Lane's bug report and proposal. Backpatch to 8.3.
of each plan node, instead of its former behavior of dumping the internal
representation of the plan tree. The latter display is still available for
those who really want it (see debug_print_plan), but uses for it are certainly
few and and far between. Per discussion.
This patch also removes the explain_pretty_print GUC, which is obsoleted
by the change.
we had several code paths where a physical tlist could be used for the input
to a Sort node, which is a dumb idea because any unneeded table columns will
increase the volume of data the sort has to push around.
(Unfortunately the easy-looking fix of calling disuse_physical_tlist during
make_sort_xxx doesn't work because in most cases we're already committed to
the current input tlist --- it's been marked with sort column numbers, or
we've built grouping column numbers using it, etc. The tlist has to be
selected properly at the calling level before we start constructing sort-col
information. This is easy enough to do, we were just failing to take the
point into consideration.)
Back-patch to 8.3. I believe the problem probably exists clear back to 7.4
when the physical tlist optimization was added, but I'm afraid to back-patch
further than 8.3 without a great deal more study than I want to put into it.
The code in this area has drifted a lot over time. The real-world importance
of these code paths is uncertain anyway --- I think in many cases we'd
probably prefer hash-based methods.
of each plan node. For the moment this is debug support only and is
not enabled unless EXPLAIN_PRINT_TLISTS is defined at build time.
Later I'll see about the idea of letting EXPLAIN VERBOSE do it.
corrupted. (Neither is very important if SIGTERM is used to shut down the
whole database cluster together, but there's a problem if someone tries to
SIGTERM individual backends.) To do this, introduce new infrastructure
macros PG_ENSURE_ERROR_CLEANUP/PG_END_ENSURE_ERROR_CLEANUP that take care
of transiently pushing an on_shmem_exit cleanup hook. Also use this method
for createdb cleanup --- that wasn't a shared-memory-corruption problem,
but SIGTERM abort of createdb could leave orphaned files lying around.
Backpatch as far as 8.2. The shmem corruption cases don't exist in 8.1,
and the createdb usage doesn't seem important enough to risk backpatching
further.