vacuum_defer_cleanup_age was introduced before hot_standby_feedback and
replication slots existed. It is hard to use reasonably - commonly it will
either be set too low (not preventing recovery conflicts, while still causing
some bloat), or too high (causing a lot of bloat). The alternatives do not
have that issue.
That on its own might not be sufficient reason to remove
vacuum_defer_cleanup_age, but it also complicates computation of xid
horizons. See e.g. the bug fixed in be504a3e97. It also is untested.
This commit removes TransactionIdRetreatSafely(), as there are no users
anymore. There might be potential future users, hence noting that here.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230317230930.nhsgk3qfk7f4axls@awork3.anarazel.de
Unaligned siglen could lead to an unaligned access to subsequent key fields.
Backpatch to 13, where opclass options were introduced.
Reported-by: Alexander Lakhin
Bug: 17847
Discussion: https://postgr.es/m/17847-171232970bea406b%40postgresql.org
Reviewed-by: Tom Lane, Pavel Borisov, Alexander Lakhin
Backpatch-through: 13
a9c70b46 added the statistics view pg_stat_io which contained columns
"io_context" and "io_object". Given that the columns are in the
pg_stat_io view, the "io" prefix is somewhat redundant, so remove it.
The code variables referring to these fields are kept unchanged so as
they can keep their context about I/O.
Bump catalog version.
Author: Melanie Plageman
Reviewed-by: Kyotaro Horiguchi, Fabrízio de Royes Mello
Discussion: https://postgr.es/m/CAAKRu_aAQoJWrvT2BYYQvJChFKra_O-5ra3jhzKJZqWsTR1CPQ@mail.gmail.com
indexes-unique.html mentioned nothing about the availability of NULLS NOT
DISTINCT to modify the NULLs-are-not-equal behavior of unique indexes.
Add this to the synopsis and clarify what it does regarding NULLs.
Author: David Gilman, David Rowley
Reviewed-by: Corey Huinker
Discussion: https://postgr.es/m/CALBH9DDr3NLqzWop1z5uZE-M5G_GYUuAeHFHQeyzFbNd8W0d=Q@mail.gmail.com
Backpatch-through: 15, where NULLS NOT DISTINCT was added
This issue can be reproduced by running `make dist` from the root of the
tree. Error introduced in fcb21b3, where additions of links in
installation.sgml require custom rules in standalone-profile.xsl to make
sure that ./INSTALL is generated correctly for the distribution tarball,
where links are replaced by equivalent terms from the profile file
changed by this commit.
Per buildfarm member guaibasaurus.
Discussion: https://postgr.es/m/ZD859FmcMRCNtz0W@paquier.xyz
We have two existing conventions for long options: either alphabetical
among short options, or all long options after all the short options.
But the convention apparently used here, next to a functionally
related option, is not one of them.
Here we remove the notes which mention which version the given vacuumdb
option is available from. There are now 11 of these notes and they're
both quite untidy and take up far more space than they seem to be worth.
On running a print preview of the compiled HTML, removing these notes
saves about 1 A4 page (~20% less space).
If people need to see which options are available on older versions, then
consulting the documents for that version seems like a good idea. In any
case, when using newer vacuumdb versions on older servers, the user will
receive an error if they try to use an unsupported option.
Additionally, 3 of the notes are warning about the option only being
available from PostgreSQL 9.6 and later. That version's support ended 2.5
years ago. So, it's quite clear that the value of these notes diminishes
over time.
Discussion: https://postgr.es/m/CAApHDvrCQn6tupx2R67VL9RP1Qy4dDuWKRvt4jaB0vk2akQchw@mail.gmail.com
Other vacuumdb options seem to have notes about which version they're
available from, so let's follow this trend for the newly added
--buffer-usage-limit option.
This addresses various deficiencies in the documentation for VACUUM and
ANALYZE's BUFFER_USEAGE_LIMIT docs.
Here we declare "size" in the syntax synopsis for VACUUM and ANALYZE's
BUFFER_USAGE_LIMIT option and then define exactly what values can be
specified for it in the section for that below.
Also, fix the incorrect ordering of vacuumdb options both in the documents
and in vacuumdb's --help output. These should be in alphabetical order.
In passing also add the minimum/maximum range for the BUFFER_USAGE_LIMIT
option. These will also serve as example values that can be modified and
used.
Reported-by: Peter Eisentraut
Discussion: https://postgr.es/m/16845cb1-b228-e157-f293-5892bced9253@enterprisedb.com
Starting with OpenSSL 1.1.0 there is no need to call PQinitOpenSSL
or PQinitSSL to avoid duplicate initialization of OpenSSL. Add a
note to the documentation to explain this.
Backpatch to all supported versions as older OpenSSL versions are
equally likely to be used for all branches.
Reported-by: Sebastien Flaesch <sebastien.flaesch@4js.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/DBAP191MB12895BFFEC4B5FE0460D0F2FB0459@DBAP191MB1289.EURP191.PROD.OUTLOOK.COM
Backpatch-through: 11, all supported versions
WHen building with GSSAPI support, explicitly require MIT Kerberos and
check for gssapi_ext.h in configure.ac and meson.build. Also add
documentation explicitly stating that we now require MIT Kerberos when
building with GSSAPI support.
Reveiwed by: Johnathan Katz
Discussion: https://postgr.es/m/abcc73d0-acf7-6896-e0dc-f5bc12a61bb1@postgresql.org
This reverts commit 3d03b24c3 (Revert Add support for Kerberos
credential delegation) which was committed on the grounds of concern
about portability, but on further review and discussion, it's clear that
we are better off explicitly requiring MIT Kerberos as that appears to
be the only GSSAPI library currently that's under proper maintenance
and ongoing development. The API used for storing credentials was added
to MIT Kerberos over a decade ago while for the other libraries which
appear to be mainly based on Heimdal, which exists explicitly to be a
re-implementation of MIT Kerberos, the API never made it to a released
version (even though it was added to the Heimdal git repo over 5 years
ago..).
This post-feature-freeze change was approved by the RMT.
Discussion: https://postgr.es/m/ZDDO6jaESKaBgej0%40tamriel.snowman.net
In the HTML output, this decorates section headers and variable list
terms with a marker ("#") that is a link to the same section/term.
That way, links inside a page can be discovered for easier sharing.
The marker only appears when hovering.
This now requires that all elements that are candidates for such a
link have an id attribute. Otherwise, an error will be generated.
All previously missing ids have been added prior to this patch.
Author: Brar Piening <brar@gmx.de>
Reviewed-by: Karl O. Pinc <kop@karlpinc.com>
Discussion: https://www.postgresql.org/message-id/flat/CAB8KJ=jpuQU9QJe4+RgWENrK5g9jhoysMw2nvTN_esoOU0=a_w@mail.gmail.com
This reverts commit e056c557ae and minor later fixes thereof.
There's a few problems in this new feature -- most notably regarding
pg_upgrade behavior, but others as well. This new feature is not in any
way critical on its own, so instead of scrambling to fix it we revert it
and try again in early 17 with these issues in mind.
Discussion: https://postgr.es/m/3801207.1681057430@sss.pgh.pa.us
The previous wording used MVF to indicate the Most Common Values'
Frequencies, but the abbreviation was never explained or defined.
Reword to mcv_freqs to make the use clearer.
Also add MCF and MCV as acronyms as they were using <acronym>
markup but were missing from the acronyms page.
Reported-by: Eric Mutta <eric.mutta@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/166112292492.654.5377188452604176150@wrigleys.postgresql.org
The tables in "71.3. Extensibility" listing the support functions
for bloom and minmax-multi opclasses should include the associated
options function. While this isn't quite as required as the rest,
you need it for full functionality of the opclass.
Back-patch to v14 where these functions were added.
We cannot use the generic array_desc approach with per-tuple nbtree
posting list update metadata because array_desc can only deal with fixed
width elements (e.g., page offset numbers). Using array_desc led to
incorrect rmgr descriptions for updates from nbtree DELETE/VACUUM WAL
records.
To fix, add specialized code to describe the update metadata as array
elements in desc output. We now iterate over the update metadata using
an approach that matches related REDO routines.
Also stop showing the updates offset number array separately in nbtree
DELETE/VACUUM desc output. It's redundant information, since the same
page offset numbers appear in the description of each individual update
element. Also make some small tweaks to the way that we format arrays
in all desc routines (not just nbtree desc routines) to make arrays a
little less verbose.
Oversight in commit 1c453cfd, which enhanced the nbtree rmgr desc
routines.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkbYuvwYKm-Y-72QEh6SPMQcAo9uONv+mR3bMGcu9E_Cg@mail.gmail.com
EXTRACT(EPOCH), EXTRACT(SECOND), and some related cases print more
trailing zeroes than they used to. This behavior change happened
with commit a2da77cdb (Change return type of EXTRACT to numeric),
and it was intentional according to the commit log:
- Return values when extracting fields with possibly fractional
values, such as second and epoch, now have the full scale that the
value has internally (so, for example, '1.000000' instead of just
'1').
It's been like that for two releases now, so while I suggested
changing this back, it's probably better to adjust the documentation
examples.
Per bug #17866 from Евгений Жужнев. Back-patch to v14 where the
change came in.
Discussion: https://postgr.es/m/17866-18eb70095b1594e2@postgresql.org
This reverts commit 3d4fa227bc.
Per discussion and buildfarm, this depends on APIs that seem to not
be available on at least one platform (NetBSD). Should be certainly
possible to rework to be optional on that platform if necessary but bit
late for that at this point.
Discussion: https://postgr.es/m/3286097.1680922218@sss.pgh.pa.us
Unsurprisingly, this requires wal_level = logical to be set on the primary and
standby. The infrastructure added in 26669757b6 ensures that slots are
invalidated if the primary's wal_level is lowered.
Creating a slot on a standby waits for a xl_running_xact record to be
processed. If the primary is idle (and thus not emitting xl_running_xact
records), that can take a while. To make that faster, this commit also
introduces the pg_log_standby_snapshot() function. By executing it on the
primary, completion of slot creation on the standby can be accelerated.
Note that logical decoding on a standby does not itself enforce that required
catalog rows are not removed. The user has to use physical replication slots +
hot_standby_feedback or other measures to prevent that. If catalog rows
required for a slot are removed, the slot is invalidated.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion, for the addition of the pg_log_standby_snapshot() function.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de> (in an older version)
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: FabrÌzio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
During WAL replay on the standby, when a conflict with a logical slot is
identified, invalidate such slots. There are two sources of conflicts:
1) Using the information added in 6af1793954, logical slots are invalidated if
required rows are removed
2) wal_level on the primary server is reduced to below logical
Uses the infrastructure introduced in the prior commit. FIXME: add commit
reference.
Change InvalidatePossiblyObsoleteSlot() to use a recovery conflict to
interrupt use of a slot, if called in the startup process. The new recovery
conflict is added to pg_stat_database_conflicts, as confl_active_logicalslot.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion for the addition of the pg_stat_database_conflicts column.
Bumps PGSTAT_FILE_FORMAT_ID for the same reason.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Needed for logical decoding on a standby. Slots need to be invalidated because
of the horizon if rows required for logical decoding are removed. If the
primary's wal_level is lowered from 'logical', logical slots on the standby
need to be invalidated.
The new invalidation methods will be used in a subsequent commit.
Logical slots that have been invalidated can be identified via the new
pg_replication_slots.conflicting column.
See 6af1793954 for an overall design of logical decoding on a standby.
Bumps catversion for the addition of the new pg_replication_slots column.
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Amit Khandekar <amitdkhan.pg@gmail.com> (in an older version)
Reviewed-by: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Fabrízio de Royes Mello <fabriziomello@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20230407075009.igg7be27ha2htkbt@awork3.anarazel.de
Provide a way to ask the kernel to use O_DIRECT (or local equivalent)
where available for data and WAL files, to avoid or minimize kernel
caching. This hurts performance currently and is not intended for end
users yet. Later proposed work would introduce our own I/O clustering,
read-ahead, etc to replace the facilities the kernel disables with this
option.
The only user-visible change, if the developer-only GUC is not used, is
that this commit also removes the obscure logic that would activate
O_DIRECT for the WAL when wal_sync_method=open_[data]sync and
wal_level=minimal (which also requires max_wal_senders=0). Those are
non-default and unlikely settings, and this behavior wasn't (correctly)
documented. The same effect can be achieved with io_direct=wal.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGK1X532hYqJ_MzFWt0n1zt8trz980D79WbjwnT-yYLZpg%40mail.gmail.com
Support GSSAPI/Kerberos credentials being delegated to the server by a
client. With this, a user authenticating to PostgreSQL using Kerberos
(GSSAPI) credentials can choose to delegate their credentials to the
PostgreSQL server (which can choose to accept them, or not), allowing
the server to then use those delegated credentials to connect to
another service, such as with postgres_fdw or dblink or theoretically
any other service which is able to be authenticated using Kerberos.
Both postgres_fdw and dblink are changed to allow non-superuser
password-less connections but only when GSSAPI credentials have been
delegated to the server by the client and GSSAPI is used to
authenticate to the remote system.
Authors: Stephen Frost, Peifeng Qiu
Reviewed-By: David Christensen
Discussion: https://postgr.es/m/CO1PR05MB8023CC2CB575E0FAAD7DF4F8A8E29@CO1PR05MB8023.namprd05.prod.outlook.com
a9c70b46db and 8aaa04b32S added counting of IO operations to a new view,
pg_stat_io. Now, add IO timing for reads, writes, extends, and fsyncs to
pg_stat_io as well.
This combines the tracking for pgBufferUsage with the tracking for pg_stat_io
into a new function pgstat_count_io_op_time(). This should make it a bit
easier to avoid the somewhat costly instr_time conversion done for
pgBufferUsage.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/flat/CAAKRu_ay5iKmnbXZ3DsauViF3eMxu4m1oNnJXqV_HyqYeg55Ww%40mail.gmail.com
Add helper functions that output arrays in a standard format, and use
the functions inside heapdesc routines. This allows tools like
pg_walinspect to show a detailed description of the page offset number
arrays for records like PRUNE and VACUUM (unless there was an FPI).
Also document the conventions that desc routines should follow. Only
the heapdesc routines follow the conventions for now, so they're just
guidelines for the time being.
Based on a suggestion from Andres Freund.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-By: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/flat/20230109215842.fktuhesvayno6o4g%40awork3.anarazel.de
This modernized version of Soundex works significantly better than
the original, particularly for non-English names.
Dag Lem, reviewed by quite a few people along the way
Discussion: https://postgr.es/m/yger1atbgfy.fsf@sid.nimrod.no
It was pointed out that pg_buffercache_summary()'s report of
the overall average usage count isn't that useful, and what
would be more helpful in many cases is to report totals for
each possible usage count. Add a new function to do it like
that. Since pg_buffercache 1.4 is already new for v16,
we don't need to create a new extension version; we'll just
define this as part of 1.4.
Nathan Bossart
Discussion: https://postgr.es/m/20230130233040.GA2800702@nathanxps13
We now create pg_constaint rows for NOT NULL constraints with
contype='n'.
We propagate these constraints during operations such as adding
inheritance relationships, creating and attaching partitions, creating
tables LIKE other tables. We mostly follow the well-known rules of
conislocal and coninhcount that we have for CHECK constraints, with some
adaptations; for example, as opposed to CHECK constraints, we don't
match NOT NULL ones by name when descending a hierarchy to alter it;
instead we match by column number. This means we don't require the
constraint names to be identical across a hierarchy.
For now, we omit them from system catalogs. Maybe this is worth
reconsidering. We don't support NOT VALID nor DEFERRABLE clauses
either; these can be added as separate features later (this patch is
already large and complicated enough.)
This has been very long in the making. The first patch was written by
Bernd Helmle in 2010 to add a new pg_constraint.contype value ('n'),
which I (Álvaro) then hijacked in 2011 and 2012, until that one was
killed by the realization that we ought to use contype='c' instead:
manufactured CHECK constraints. However, later SQL standard
development, as well as nonobvious emergent properties of that design
(mostly, failure to distinguish them from "normal" CHECK constraints as
well as the performance implication of having to test the CHECK
expression) led us to reconsider this choice, so now the current
implementation uses contype='n' again.
In 2016 Vitaly Burovoy also worked on this feature[1] but found no
consensus for his proposed approach, which was claimed to be closer to
the letter of the standard, requiring additional pg_attribute columns to
track the OID of the NOT NULL constraint for that column.
[1] https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Author: Bernd Helmle <mailings@oopsware.de>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CACA0E642A0267EDA387AF2B%40%5B172.26.14.62%5D
Discussion: https://postgr.es/m/AANLkTinLXMOEMz+0J29tf1POokKi4XDkWJ6-DDR9BKgU@mail.gmail.com
Discussion: https://postgr.es/m/20110707213401.GA27098@alvh.no-ip.org
Discussion: https://postgr.es/m/1343682669-sup-2532@alvh.no-ip.org
Discussion: https://postgr.es/m/CAKOSWNkN6HSyatuys8xZxzRCR-KL1OkHS5-b9qd9bf1Rad3PLA@mail.gmail.com
Discussion: https://postgr.es/m/20220817181249.q7qvj3okywctra3c@alvherre.pgsql
The old wording described these as being multiplied by max_connections
plus max_prepared_transactions, which hasn't been exactly right for
some time thanks to the addition of various auxiliary processes.
Moreover, exactness here is a bit pointless given that the lock tables
can expand into the initially-unallocated "slop" space in shared
memory. Rather than trying to track exactly what the code is doing,
let's just use the term "server processes".
Likewise adjust these GUCs' description strings in guc_tables.c.
Wang Wei, reviewed by Nathan Bossart and myself
Discussion: https://postgr.es/m/OS3PR01MB6275BDD09C9B875C65FCC5AB9EA39@OS3PR01MB6275.jpnprd01.prod.outlook.com
1cbbee033 added BUFFER_USAGE_LIMIT to the VACUUM and ANALYZE commands, so
here we permit that option to be specified in vacuumdb.
In passing, adjust the documents for vacuum_buffer_usage_limit and the
BUFFER_USAGE_LIMIT VACUUM option to mention "kB" rather than "KB". Do the
same for the ERROR message in ExecVacuum() and
check_vacuum_buffer_usage_limit(). Without that we might tell a user that
the valid minimum value is 128 KB only to reject that because we accept
only "kB" and not "KB".
Also, add a small reminder comment in vacuum.h to try to trigger the
memory of anyone adding new fields to VacuumParams that they might want to
consider if vacuumdb needs to grow a new option too.
Author: Melanie Plageman
Reviewed-by: Justin Pryzby
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/ZAzTg3iEnubscvbf@telsasoft.com
Add new options to the VACUUM and ANALYZE commands called
BUFFER_USAGE_LIMIT to allow users more control over how large to make the
buffer access strategy that is used to limit the usage of buffers in
shared buffers. Larger rings can allow VACUUM to run more quickly but
have the drawback of VACUUM possibly evicting more buffers from shared
buffers that might be useful for other queries running on the database.
Here we also add a new GUC named vacuum_buffer_usage_limit which controls
how large to make the access strategy when it's not specified in the
VACUUM/ANALYZE command. This defaults to 256KB, which is the same size as
the access strategy was prior to this change. This setting also
controls how large to make the buffer access strategy for autovacuum.
Per idea by Andres Freund.
Author: Melanie Plageman
Reviewed-by: David Rowley
Reviewed-by: Andres Freund
Reviewed-by: Justin Pryzby
Reviewed-by: Bharath Rupireddy
Discussion: https://postgr.es/m/20230111182720.ejifsclfwymw2reb@awork3.anarazel.de
Make the \g, \o, \w, and \copy commands set these variables
when closing a pipe. We missed doing this in commit b0d8f2d98,
but it seems like a good idea.
There are some remaining places in psql that intentionally don't
update these variables after running a child program:
* pager invocations
* backtick evaluation within a prompt
* \e (edit query buffer)
Corey Huinker and Tom Lane
Discussion: https://postgr.es/m/CADkLM=eSKwRGF-rnRqhtBORRtL49QsjcVUCa-kLxKTqxypsakw@mail.gmail.com
\watch can now be told to stop after N executions of the query.
With the idea that we might want to add more options to \watch
in future, this patch generalizes the command's syntax to a list
of name=value options, with the interval allowed to omit the name
for backwards compatibility.
Andrey Borodin, reviewed by Kyotaro Horiguchi, Nathan Bossart,
Michael Paquier, Yugo Nagata, and myself
Discussion: https://postgr.es/m/CAAhFRxiZ2-n_L1ErMm9AZjgmUK=qS6VHb+0SaMn8sqqbhF7How@mail.gmail.com
zstd compression supports a special mode for finding matched in distant
past, which may result in better compression ratio, at the expense of
using more memory (the window size is 128MB).
To enable this optional mode, use the "long" keyword when specifying the
compression method (--compress=zstd:long).
Author: Justin Pryzby
Reviewed-by: Tomas Vondra, Jacob Champion
Discussion: https://postgr.es/m/20230224191840.GD1653@telsasoft.com
Discussion: https://postgr.es/m/20220327205020.GM28503@telsasoft.com
Michael Paquier
Etsuro Fujita
Andres Freund
Noah Misch
Alexander Korotkov
Fujii Masao
David Rowley
Jeff Davis
Peter Eisentraut
Daniel Gustafsson
Stephen Frost
Alvaro Herrera
Robert Haas
Tom Lane
Peter Geoghegan
Thomas Munro
Amit Kapila
Tomas Vondra