The test to ensure that decoding changes via logical slot from another
database will fail was incorrectly done on the primary node instead of on
the standby node.
In the passing, make the test to wait for replay catchup by using
wait_for_replay_catchup(). This will make it consistent with the way we
wait at other places in the test.
Author: Shi yu
Reviewed-by: Bertrand Drouvot, Amit Kapila
Discussion: https://postgr.es/m/OSZPR01MB6310B0A507A0F2A2D379F38CFD6A9@OSZPR01MB6310.jpnprd01.prod.outlook.com
For some reason I had not implemented RBM_ZERO_AND_CLEANUP_LOCK support in
ExtendBufferedRelTo(), likely thinking it not being reachable. But it is
reachable, e.g. when replaying a WAL record for a page in a relation that
subsequently is truncated (likely only reachable when doing crash recovery or
PITR, not during ongoing streaming replication).
As now all of the RBM_* modes are supported, remove assertions checking mode.
As we had no test coverage for this scenario, add a new TAP test. There's
plenty more that ought to be tested in this area...
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/392271.1681238924%40sss.pgh.pa.us
Discussion: https://postgr.es/m/0b5eb82b-cb99-e0a4-b932-3dc60e2e3926@gmail.com
At least one slow buildfarm system (hoverfly) showed that the database
creation was not replicated before we try to create logical replication slots
on the standby, in that database.
Reported-by: Noah Misch <noah@leadboat.com>
Author: "Drouvot, Bertrand" <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/20230411053657.GA1177147@rfd.leadboat.com
Our convention for some time has been that successful tests shouldn't
print anything on stderr. A stray "diag" call violated that, and
for that matter messed up the normal TAP progress display.
This breaks out the background and interactive psql functionality into a
new class, PostgreSQL::Test::BackgroundPsql. Sessions are still initiated
via PostgreSQL::Test::Cluster, but once started they can be manipulated by
the new helper functions which intend to make querying easier. A sample
session for a command which can be expected to finish at a later time can
be seen below.
my $session = $node->background_psql('postgres');
$bsession->query_until(qr/start/, q(
\echo start
CREATE INDEX CONCURRENTLY idx ON t(a);
));
$bsession->quit;
Patch by Andres Freund with some additional hacking by me.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/20230130194350.zj5v467x4jgqt3d6@awork3.anarazel.de
Oversight in f2698ea02c, which introduced
the variable. This lowers some 1000s timeouts to the configurable
default of 180s, due to a lack of evidence for needing the longer
timeout. The alternative was 6*PG_TEST_TIMEOUT_DEFAULT, which we can
adopt if the need arises. Given the lack of observed trouble with these
timeouts, no back-patch.
Coverage of the query jumbling code has always relied on the queries
included in the regression tests of pg_stat_statements. This has its
limitations, as a lot of query patterns have never really stressed the
query jumbling code. The situation got a bit worse since the query
jumbling has been added in the backend core code (5fd9dfa), hence new
nodes that should be included in the jumbling could easily be missed,
resulting in failures in pg_stat_statements or any modules that require
query ID computations. Forcing a load of pg_stat_statements in
027_stream_regress.pl ensures that nodes are never missed in the
computations, without having to rely on a buildfarm member for this
check.
Before this commit, the line coverage of queryjumblefuncs.funcs.c was
around 48.5%, now up to 94.6% just by running 027_stream_regress.pl.
A basic check is added to show that pg_stat_statements reports are
generated after the main regression test suite is finished.
Discussion: https://postgr.es/m/Y+nD9LN70w+8eaG9@paquier.xyz
WAL_LOG does a scan of the template's pg_class to determine the set of
relations that need to be copied from a template database to the new
one. However, as coded in 9c08aea, this copy strategy would load the
pages of pg_class without considering it as a permanent relation,
causing the loaded pages to never be flushed when they should. Any
modification of the template's pg_class, mostly through DDLs, would then
be missed, causing corruptions.
STRATEGY = WAL_LOG is the default over FILE_COPY since it has been
introduced, so any changes done to pg_class on a database template would
be gone. Updates of database templates should be a rare thing, so the
impact of this bug should be hopefully limited. The pre-14 default
strategy FILE_COPY is safe, and can be used as a workaround.
Ryo Matsumura has found and analyzed the issue, and Nathan has written a
test able to reproduce the failure (with few tweaks from me).
Backpatch down to 15, where STRATEGY = WAL_LOG has been introduced.
Author: Nathan Bossart, Ryo Matsumura
Reviewed-by: Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/TYCPR01MB6868677E499C9AD5123084B5E8A39@TYCPR01MB6868.jpnprd01.prod.outlook.com
Backpatch-through: 15
This test has been added as of 857ee8e that has introduced the SQL
function txid_status(), with the purpose of checking that a transaction
ID still in-progress during a crash is correctly marked as aborted after
recovery finishes.
This test is unstable, and some configuration scenarios may that easier
to reproduce (wal_level=minimal, wal_compression=on) because the WAL
holding the information about the in-progress transaction ID may not
have made it to disk yet, hence a post-crash recovery may cause the same
XID to be reused, triggering a test failure.
We have discussed a few approaches, like making this function force a
WAL flush to make it reliable across crashes, but we don't want to pay a
performance penalty in some scenarios, as well. The test could have
been tweaked to enforce a checkpoint but that actually breaks the
promise of the test to rely on a stable result of txid_status() after
a crash.
This issue has been reported a few times across the past years, with an
original report from Kyotaro Horiguchi. The buildfarm machines tanager,
hachi and gokiburi enable wal_compression, and fail on this test
periodically.
Discussion: https://postgr.es/m/3163112.1674762209@sss.pgh.pa.us
Discussion: https://postgr.es/m/20210305.115011.558061052471425531.horikyota.ntt@gmail.com
Backpatch-through: 11
Test files should now ignore has_wal_read_bug() so long as
wait_for_catchup() is their only known way of reaching the bug. That's
at least five files today, a number expected to grow over time. This
commit removes skip logic from three. By doing so, systems having the
bug regain the ability to catch other kinds of defects via those three
tests. The other two, 002_databases.pl and 031_recovery_conflict.pl,
have been unprotected. Back-patch to v15, where done_testing() first
became our standard.
Discussion: https://postgr.es/m/20221030031639.GA3082137@rfd.leadboat.com
Commit df3737a651 added an incorrect assertion about the preconditions
for invoking the backup cleanup callback: it misfires at session end in
case a backup completes successfully. Fix it, using coding from Michaël
Paquier. Also add some tests for the various cases.
Reported by Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20221021.161038.1277961198945653224.horikyota.ntt@gmail.com
As currently designed, with a callback registered in a ERROR_CLEANUP
block, the shutdown callback would get called twice when updating
archive_library on SIGHUP, which is something that we want to avoid to
ease the life of extension writers.
Anyway, an ERROR in the archiver process is treated as a FATAL, stopping
it immediately, hence there is no need for a ERROR_CLEANUP block.
Instead of that, the shutdown callback is not called upon
before_shmem_exit(), giving to the modules the opportunity to do any
cleanup actions before the server shuts down its subsystems.
While on it, this commit adds some testing coverage for the shutdown
callback. Neither shell_archive nor basic_archive have been using it,
and one is added to shell_archive, whose trigger is checked in a TAP
test through a shutdown sequence.
Author: Nathan Bossart, Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20221015221328.GB1821022@nathanxps13
Backpatch-through: 15
The one about "terminating process to release replication slot" told
you nothing about why that was happening. The one about "invalidating
slot because its restart_lsn exceeds max_slot_wal_keep_size" told you
what was happening, but violated our message style guideline about
keeping the primary message short. Add DETAIL/HINT lines to carry
the appropriate detail and make the two cases more uniform.
While here, fix bogus test logic in 019_replslot_limit.pl: if it timed
out without seeing the expected log message, no test failure would be
reported. This is flat broken since commit 549ec201d removed the test
counts; even before that it was horribly bad style, since you'd only
get told that not all tests had been run.
Kyotaro Horiguchi, reviewed by Bertrand Drouvot; test fixes by me
Discussion: https://postgr.es/m/20211214.130456.2233153190058148084.horikyota.ntt@gmail.com
Commit 59be1c942a already tried to make
src/test/recovery/t/033_replay_tsp_drops more reliable, but it wasn't
enough. Try to improve on that by making this use of a replication slot
to be more like others. Also, don't drop the slot.
Make a few other stylistic changes while at it. It's still quite slow,
which is another thing that we need to fix in this script.
Backpatch to all supported branches.
Discussion: https://postgr.es/m/349302.1659191875@sss.pgh.pa.us
This commit adds some test coverage for ee79647 (prevent BASE_BACKUP
from running in the middle of another base backup) and b24b2be
(BASE_BACKUP cancellation followed by pg_backup_start), caused by the
interactions of replication and SQL commands in a logical replication
connection in a WAL sender.
The second test uses a design close to what has been introduced in
0475a97f, where BASE_BACKUP is throttled to give enough room for a
cancellation, though this time we rely on psql with multiple -c
switches to keep a connection around for the second query.
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/Ys/NCI4Eo9300GnQ@paquier.xyz
The new test is from commit 9e4f914b5e.
With this setting messages have SQL error numbers included, so that
needs to be provided for in the pattern looked for.
On FreeBSD, the new test fails due to a WAL file being removed before
the standby has had the chance to copy it. Fix by adding a replication
slot to prevent the removal until after the standby has connected.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reported-by: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2Wj5nau_qpjbwihvmXLfkAWOZ5TKdbnqOc6nKSiRJEoPyQ@mail.gmail.com
Crash recovery on standby may encounter missing directories
when replaying database-creation WAL records. Prior to this
patch, the standby would fail to recover in such a case;
however, the directories could be legitimately missing.
Consider the following sequence of commands:
CREATE DATABASE
DROP DATABASE
DROP TABLESPACE
If, after replaying the last WAL record and removing the
tablespace directory, the standby crashes and has to replay the
create database record again, crash recovery must be able to continue.
A fix for this problem was already attempted in 49d9cfc68b, but it
was reverted because of design issues. This new version is based
on Robert Haas' proposal: any missing tablespaces are created
during recovery before reaching consistency. Tablespaces
are created as real directories, and should be deleted
by later replay. CheckRecoveryConsistency ensures
they have disappeared.
The problems detected by this new code are reported as PANIC,
except when allow_in_place_tablespaces is set to ON, in which
case they are WARNING. Apart from making tests possible, this
gives users an escape hatch in case things don't go as planned.
Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Author: Asim R Praveen <apraveen@pivotal.io>
Author: Paul Guo <paulguo@gmail.com>
Reviewed-by: Anastasia Lubennikova <lubennikovaav@gmail.com> (older versions)
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com> (older versions)
Reviewed-by: Michaël Paquier <michael@paquier.xyz>
Diagnosed-by: Paul Guo <paulguo@gmail.com>
Discussion: https://postgr.es/m/CAEET0ZGx9AvioViLf7nbR_8tH9-=27DN5xWJ2P9-ROH16e4JUA@mail.gmail.com
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
This reverts most of 91c0570a79, f28bf667f6, fe0972ee5e, afdeff1052. The
only thing left is the retry loop in 019_replslot_limit.pl that avoids
spurious failures by retrying a couple times.
We haven't seen any hard evidence that this is caused by anything but slow
process shutdown. We did not find any cases where walsenders did not vanish
after waiting for longer. Therefore there's no reason for this debugging code
to remain.
Discussion: https://postgr.es/m/20220530190155.47wr3x2prdwyciah@alap3.anarazel.de
Backpatch: 15-
Per BF animal chipmunk: CREATE DATABASE could apparently fail due to an
AV process being in the template database and not quitting fast enough
for the 5 second timeout in CountOtherDBBackends(). The test script had
autovacuum_naptime=1s to encourage more activity and opening of fds, but
that wasn't strictly necessary for this test. Take it out.
Per BF animal skink: there was a 300s timeout for all tests in the
script, but apparently that was not enough under valgrind. Let's use
the standard timeout $PostgreSQL::Test::Utils::timeout_default, but
restart it for each query we run.
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKa8HNJaA24gqiiFoGy0ysndeVoJsHvX_q1-DVLFaGAmw%40mail.gmail.com
Commits 4eb21763 and b74e94dc introduced a way to force every backend to
close all relation files, to fix an ancient Windows-only bug.
This commit extends that behavior to all operating systems and adds
a couple of extra barrier points, to fix a totally different class of
bug: the reuse of relfilenodes in scenarios that have no other kind of
cache invalidation to prevent file descriptor mix-ups.
In all releases, data corruption could occur when you moved a database
to another tablespace and then back again. Despite that, no back-patch
for now as the infrastructure required is too new and invasive. In
master only, since commit aa010514, it could also happen when using
CREATE DATABASE with a user-supplied OID or via pg_upgrade.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220209220004.kb3dgtn2x2k2gtdm%40alap3.anarazel.de
The recovery conflict tests added in 9f8a050f68 surfaced a bug in the
interaction between buffer pin and deadlock recovery conflicts. To make sure
that the bugfix won't break deadlock conflict detection, add a test for that
scenario.
031_recovery_conflict.pl will later be backpatched, with this included.
Discussion: https://postgr.es/m/20220413002626.udl7lll7f3o7nre7@alap3.anarazel.de
Checking the execution of archive_cleanup_command on a standby requires
a valid checkpoint coming from its primary, but the logic did not check
that the standby replayed up to the point of the checkpoint, causing the
test checking for the execution of archive_cleanup_command to fail.
This race was more visible in slow environments.
Issue introduced in 46dea24, so no backpatch is needed.
Author: Tom Lane
Discussion: https://postgr.es/m/4015413.1649454951@sss.pgh.pa.us
This test, introduced in df86e52, uses a second standby to check that
it is able to remove correctly RECOVERYHISTORY and RECOVERYXLOG at the
end of recovery. This standby uses the archives of the primary to
restore its contents, with some of the archive's contents coming from
the first standby previously promoted. In slow environments, it was
possible that the test did not check what it should, as the history file
generated by the promotion of the first standby may not be stored yet on
the archives the second standby feeds on. So, it could be possible that
the second standby selects an incorrect timeline, without restoring a
history file at all.
This commits adds a wait phase to make sure that the history file
required by the second standby is archived before this cluster is
created. This relies on poll_query_until() with pg_stat_file() and an
absolute path, something not supported in REL_10_STABLE.
While on it, this adds a new test to check that the history file has
been restored by looking at the logs of the second standby. This
ensures that a RECOVERYHISTORY, whose removal needs to be checked,
is created in the first place. This should make the test more robust.
This test has been introduced by df86e52, but it came in light as an
effect of the bug fixed by acf1dd42, where the extra restore_command
calls made the test much slower.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/YlT23IvsXkGuLzFi@paquier.xyz
Backpatch-through: 11
Previously we didn't, which lead to an assertion failure when resetting
partially loaded statistics. This was encountered on the buildfarm, for
as-of-yet unknown reasons.
Ttighten up a validity check when reading the stats file, verifying 'E'
signals the end of the file (rather than just stopping reading). That's then
used in a test appending to the stats file that crashed before the fix in
pgstat_drop_all_entries().
Reported by buildfarm animals mylodon and kestrel, via Tom Lane.
Discussion: https://postgr.es/m/1656446.1650043715@sss.pgh.pa.us
When not loading stats at startup (i.e. pgstat_discard_stats() getting
called), reset timestamps of fixed numbered stats would be left at
0. Oversight in 5891c7a8ed.
Instead use pgstat_reset_after_failure() and add tests verifying that
fixed-numbered reset timestamps are set appropriately.
Reported-By: "David G. Johnston" <david.g.johnston@gmail.com>
Discussion: https://postgr.es/m/CAKFQuwamFuaQHKdhcMt4Gbw5+Hca2UE741B8gOOXoA=TtAd2Yw@mail.gmail.com
- subscriber stats reset path was untested
- slot stat sreset path for all slots was untested
- pg_stat_database.sessions etc was untested
- pg_stat_reset_shared() was untested, for any kind of shared stats
- pg_stat_reset() was untested
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Previously none of our tests triggered recovery conflicts. The test is
primarily motivated by needing tests for recovery conflict stats for shared
memory based pgstats. But it's also a decent start for recovery conflict
handling in general.
The only type of recovery conflict not tested yet are rcovery deadlock
conflicts.
By configuring log_recovery_conflict_waits the test adds some very minimal
testing for that path as well.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Tests that standbys:
- drop stats for objects when the those records are replayed
- persist stats across graceful restarts
- discard stats after immediate / crash restarts
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Test that stats are restored during normal restarts, discarded after a crash /
immediate restart, and that a corrupted stats file leads to stats being reset.
Author: Melanie Plageman <melanieplageman@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
Add support for unlogged sequences. Unlike for unlogged tables, this
is not a performance feature. It allows sequences associated with
unlogged tables to be excluded from replication.
A new subcommand ALTER SEQUENCE ... SET LOGGED/UNLOGGED is added.
An identity/serial sequence now automatically gets and follows the
persistence level (logged/unlogged) of its owning table. (The
sequences owned by temporary tables were already temporary through the
separate mechanism in RangeVarAdjustRelationPersistence().) But you
can still change the persistence of an owned sequence separately.
Also, pg_dump and pg_upgrade preserve the persistence of existing
sequences.
Discussion: https://www.postgresql.org/message-id/flat/04e12818-2f98-257c-b926-2845d74ed04f%402ndquadrant.com
Exclusive-mode backups have been deprecated since 9.6 (when
non-exclusive backups were introduced) due to the issues
they can cause should the system crash while one is running and
generally because non-exclusive provides a much better interface.
Further, exclusive backup mode wasn't really being tested (nor was most
of the related code- like being able to log in just to stop an exclusive
backup and the bits of the state machine related to that) and having to
possibly deal with an exclusive backup and the backup_label file
existing during pg_basebackup, pg_rewind, etc, added other complexities
that we are better off without.
This patch removes the exclusive backup mode, the various special cases
for dealing with it, and greatly simplifies the online backup code and
documentation.
Authors: David Steele, Nathan Bossart
Reviewed-by: Chapman Flack
Discussion: https://postgr.es/m/ac7339ca-3718-3c93-929f-99e725d1172c@pgmasters.nethttps://postgr.es/m/CAHg+QDfiM+WU61tF6=nPZocMZvHDzCK47Kneyb0ZRULYzV5sKQ@mail.gmail.com
Michael Paquier
Amit Kapila
Andres Freund
Tom Lane
Daniel Gustafsson
Noah Misch
Alvaro Herrera
Bruce Momjian
Peter Eisentraut
Andrew Dunstan
Robert Haas
Thomas Munro
Stephen Frost