Allow some operator-like tokens to be used as function names.
Flesh out support for time, timetz, and interval operators
and interactions.
Regression tests pass, but non-reference-platform horology test results
will need to be updated.
it fixing Y,YY,YYY,YYYY conversion, the docs and regress tests update
are included too.
During the patch testing I found small bug in miscadmin.h in
convertstr() declaration. Here it's fixed too.
Thanks
Karel
rather than just being aliases for int4in/int4out. Give type Oid a
full set of comparison operators that do proper unsigned comparison,
instead of reusing the int4 comparators. Since pg_dump is now doing
unsigned comparisons of OIDs, it is now *necessary* that we play by
the rules here. In fact, given that btoidcmp() has been doing unsigned
comparison for quite some time, it seems likely that we have index-
corruption problems in 7.0 and before once the Oid counter goes past
2G. Fixing these operators is a necessary step before we can think
about 8-byte Oid, too.
in pghackers list. Support for oldstyle internal functions is gone
(no longer needed, since conversion is complete) and pg_language entry
'internal' now implies newstyle call convention. pg_language entry
'newC' is gone; both old and newstyle dynamically loaded C functions
are now called language 'C'. A newstyle function must be identified
by an associated info routine. See src/backend/utils/fmgr/README.
functions, per recent discussions on pghackers. For now, I have called
the verbose-display formatting function text(), but will reconsider if
enough people object.
initdb forced.
on pghackers. Arrange for the sort ordering of general INET values
to be network part as major sort key, host part as minor sort key.
I did not force an initdb for this change, but anyone who's running
indexes on general INET values may need to recreate those indexes.
as well allow DROP multiple INDEX, RULE, TYPE as well. Add missing
CommandCounterIncrement to DROP loop, which could cause trouble otherwise
with multiple DROP of items affecting same catalog entries. Try to
bring a little consistency to various error messages using 'does not exist',
'nonexistent', etc --- I standardized on 'does not exist' since that's
what the vast majority of the existing uses seem to be.
SQL92 semantics, including support for ALL option. All three can be used
in subqueries and views. DISTINCT and ORDER BY work now in views, too.
This rewrite fixes many problems with cross-datatype UNIONs and INSERT/SELECT
where the SELECT yields different datatypes than the INSERT needs. I did
that by making UNION subqueries and SELECT in INSERT be treated like
subselects-in-FROM, thereby allowing an extra level of targetlist where the
datatype conversions can be inserted safely.
INITDB NEEDED!
regression tests for specific types, and move a few others to the
cross-type "horology" test.
Rearrange the test order slightly, and move the abstime test to the
"parallel safe" area.
Hand-patch the results for "1947" and for "solaris", so those may not
be exactly correct.
for views. Views are now have a "relkind" of
RELKIND_VIEW instead of RELKIND_RELATION.
Also, views no longer have actual heap storage
files.
The following changes were made
1. CREATE VIEW sets the new relkind
2. The executor complains if a DELETE or
INSERT references a view.
3. DROP RULE complains if an attempt is made
to delete a view SELECT rule.
4. CREATE RULE "_RETmytable" AS ON SELECT TO mytable DO INSTEAD ...
1. checks to make sure mytable is empty.
2. sets the relkind to RELKIND_VIEW.
3. deletes the heap storage files.
5. LOCK myview is not allowed. :)
6. the regression test type_sanity was changed to
account for the new relkind value.
7. CREATE INDEX ON myview ... is not allowed.
8. VACUUM myview is not allowed.
VACUUM automatically skips views when do the entire
database.
9. TRUNCATE myview is not allowed.
THINGS LEFT TO THINK ABOUT
o pg_views
o pg_dump
o pgsql (\d \dv)
o Do we really want to be able to inherit from views?
o Is 'DROP TABLE myview' OK?
--
Mark Hollomon
didn't hear anything about, but which would
have broken with the function manager changes
anyway.
Well, this patch checks that a unique constraint
of some form (unique or pk) is on the referenced
columns of an FK constraint and that the columns
in the referencing table exist at creation time.
The former is to move closer to SQL compatibility
and the latter is in answer to a bug report.
I also added a basic check of this functionality
to the alter table and foreign key regression
tests.
Stephan Szabo
sszabo@bigpanda.com
rather than the "~~" operator; this made it easy to add ESCAPE features.
Implement ILIKE, NOT ILIKE, and the ESCAPE clause for them.
afaict this is not MultiByte clean, but lots of other stuff isn't either.
Fix up underlying support code for LIKE/NOT LIKE.
Things should be faster and does not require internal string copying.
Update regression test to add explicit checks for
LIKE/NOT LIKE/ILIKE/NOT ILIKE.
Remove colon and semi-colon operators as threatened in 7.0.
Implement SQL99 COMMIT/AND NO CHAIN.
Throw elog(ERROR) on COMMIT/AND CHAIN per spec
since we don't yet support it.
Implement SQL99 CREATE/DROP SCHEMA as equivalent to CREATE DATABASE.
This is only a stopgap or demo since schemas will have another
implementation soon.
Remove a few unused production rules to get rid of warnings
which crept in on the last commit.
Fix up tabbing in some places by removing embedded spaces.
the planner may try to generate them as a result of transitivity of the
existing int2-vs-int4 and int4-vs-int8 operators. In fact, it is now
necessary that mergejoinable cross-datatype operators form closed sets.
Add an opr_sanity regress test to detect missing operators.
varlena elements work now. Allow assignment to previously-nonexistent
subscript position to extend array, but only for 1-D arrays and only
if adjacent to existing positions (could do more if we had a way to
represent nulls in arrays, but I don't want to tackle that now).
Arrange for assignment of NULL to an array element in UPDATE to be a
no-op, rather than setting the entire array to NULL as it used to.
(Throwing an error would be a reasonable alternative, but it's never
done that...) Update regress test accordingly.
type different from input type but are expecting ExecAgg to insert the
first non-null input as the starting transition value. This has always
been verboten, but wasn't checked for until now...
There's now only one transition value and transition function.
NULL handling in aggregates is a lot cleaner. Also, use Numeric
accumulators instead of integer accumulators for sum/avg on integer
datatypes --- this avoids overflow at the cost of being a little slower.
Implement VARIANCE() and STDDEV() aggregates in the standard backend.
Also, enable new LIKE selectivity estimators by default. Unrelated
change, but as long as I had to force initdb anyway...
Include updates for the comment.sql regression test.
Implement SET SESSION CHARACTERISTICS and SET DefaultXactIsoLevel.
Implement SET SESSION CHARACTERISTICS TRANSACTION COMMIT
and SET AutoCommit in the parser only.
Need to add code to actually do something.
Implement WITHOUT TIME ZONE type qualifier.
Define SCHEMA keyword, along with stubbed-out grammar.
Implement "[IN|INOUT|OUT] [varname] type" function arguments
in parser only; INOUT and OUT throws an elog(ERROR).
Add PATH as a type-specific token, since PATH is in SQL99
to support schema resource search and resolution.
entries now for int8 and network hash indexes. int24_ops and int42_ops
are gone. pg_opclass no longer contains multiple entries claiming to be
the default opclass for the same datatype. opr_sanity regress test
extended to catch errors like these in the future.
inputs have been converted to newstyle. This should go a long way towards
fixing our portability problems with platforms where char and short
parameters are passed differently from int-width parameters. Still
more to do for the Alpha port however.
after trying to resolve the item as an input-column name. This allows us
to be compliant with the SQL92 spec for queries that fall within the spec,
while still accepting the same out-of-spec queries as 6.5 did. You'll only
lose if there is an output column name that is the same as an input
column name, but doesn't refer to the same value. 7.0 will interpret
such a GROUP BY spec differently than 6.5 did. No way around that, because
6.5 was clearly not spec compliant.
Implement TIME WITH TIME ZONE type (timetz internal type).
Remap length() for character strings to CHAR_LENGTH() for SQL92
and to remove the ambiguity with geometric length() functions.
Keep length() for character strings for backward compatibility.
Shrink stored views by removing internal column name list from visible rte.
Implement min(), max() for time and timetz data types.
Implement conversion of TIME to INTERVAL.
Implement abs(), mod(), fac() for the int8 data type.
Rename some math functions to generic names:
round(), sqrt(), cbrt(), pow(), etc.
Rename NUMERIC power() function to pow().
Fix int2 factorial to calculate result in int4.
Enhance the Oracle compatibility function translate() to work with string
arguments (from Edwin Ramirez).
Modify pg_proc system table to remove OID holes.
the to_char() source code is large, here are regression tests for
numeric/timestamp/int8 part. It is probably enough test for formatting
code in the formatting.c module. The others (float4/float8/int4) types
share this formatting code and eventual bugs for these types aren't
few probable.
Patch fix timestamp_to_char() for infinity/invalid timestamp too.
Karel
tests for the Foreign Key support in 7.0 which
was made against a CVS copy from this
afternoon.
This modifies
src/test/regress/sql/run_check.tests
src/test/regress/sql/alter_table.sql
src/test/regress/expected/alter_table.out
src/test/regress/sql/foreign_key.sql
src/test/regress/expected/foreign_key.out
sszabo@bigpanda.co
interpret a column name as an output column alias (targetlist AS name),
ather than a real column name as it ought to. According to the spec,
only ORDER BY should look at output column names. I left in GROUP BY's
willingness to use an output column number ('GROUP BY 2'), even though
this is also contrary to the spec --- again, only ORDER BY is supposed
to accept that. But there is no possible reason to want to GROUP BY
an integer constant, so keeping this old behavior won't break any
SQL-compliant queries. DISTINCT ON will behave the same as GROUP BY.
Change numerology regress test, which depended on the incorrect
behavior.
selectivity functions and make the r-tree operators use them. The
estimation functions themselves are just stubs, unfortunately, but
perhaps someday someone will make them compute realistic estimates.
Change pg_am so that the optimizer can reliably tell the difference
between ordered and unordered indexes --- before it would think that
an r-tree index can be scanned in '<<' order, which is not right AFAIK.
Repair broken negator links for network_sup and related ops.
Initdb forced. This might be my last initdb force for 7.0 ... hope so
anyway ...
Implement "date/time grand unification".
Transform datetime and timespan into timestamp and interval.
Deprecate datetime and timespan, though translate to new types in gram.y.
Transform all datetime and timespan catalog entries into new types.
Make "INTERVAL" reserved word allowed as a column identifier in gram.y.
Remove dt.h, dt.c files, and retarget datetime.h, datetime.c as utility
routines for all date/time types.
date.{h,c} now deals with date, time types.
timestamp.{h,c} now deals with timestamp, interval types.
nabstime.{h,c} now deals with abstime, reltime, tinterval types.
Make NUMERIC a known native type for purposes of type coersion. Not tested.
accesses versus sequential accesses, a (very crude) estimate of the
effects of caching on random page accesses, and cost to evaluate WHERE-
clause expressions. Export critical parameters for this model as SET
variables. Also, create SET variables for the planner's enable flags
(enable_seqscan, enable_indexscan, etc) so that these can be controlled
more conveniently than via PGOPTIONS.
Planner now estimates both startup cost (cost before retrieving
first tuple) and total cost of each path, so it can optimize queries
with LIMIT on a reasonable basis by interpolating between these costs.
Same facility is a win for EXISTS(...) subqueries and some other cases.
Redesign pathkey representation to achieve a major speedup in planning
(I saw as much as 5X on a 10-way join); also minor changes in planner
to reduce memory consumption by recycling discarded Path nodes and
not constructing unnecessary lists.
Minor cleanups to display more-plausible costs in some cases in
EXPLAIN output.
Initdb forced by change in interface to index cost estimation
functions.
SELECT DISTINCT ON (expr [, expr ...]) targetlist ...
and there is a check to make sure that the user didn't specify an ORDER BY
that's incompatible with the DISTINCT operation.
Reimplement nodeUnique and nodeGroup to use the proper datatype-specific
equality function for each column being compared --- they used to do
bitwise comparisons or convert the data to text strings and strcmp().
(To add insult to injury, they'd look up the conversion functions once
for each tuple...) Parse/plan representation of DISTINCT is now a list
of SortClause nodes.
initdb forced by querytree change...
pghackers discussion of 5-Jan-2000. The amopselect and amopnpages
estimators are gone, and in their place is a per-AM amcostestimate
procedure (linked to from pg_am, not pg_amop).
Implements the CREATE CONSTRAINT TRIGGER and SET CONSTRAINTS commands.
TODO:
Generic builtin trigger procedures
Automatic execution of appropriate CREATE CONSTRAINT... at CREATE TABLE
Support of new trigger type in pg_dump
Swapping of huge # of events to disk
Jan
before comparison; if fields being joined are different widths then hashing
will yield wrong answer. Also, remove hashjoinable mark from all uses of
array_eq, because array structures may have padding bytes between elements
and the pad bytes are of uncertain content. This could be revisited if
array code is cleaned up.
Modify opr_sanity regress test to complain if array_eq operator is marked
hashjoinable.
1. Using 100 digits after decimal point on the default
make runtest.
2. Using 1000 digits after decimal point in a new target
make bigtest.
At the end of 'make runtest', a hint about the new bigtest is
printed.
Jan
arrayfuncs.patch fixes a small bug in my previous patches for
arrays
array-regress.patch adds _bpchar and _varchar to regression tests
--
Massimo Dal Zotto
in rules regression test, in order to eliminate bogus test 'failures'
that occur due to platform-dependent and join-implementation-dependent
ordering of tuples. I'm not sure that I got all of the SELECTs that need
ordering clauses --- we may need some more. But this takes care of the
diffs between my platform and Jan's.
hashjoin's hashFunc() so that it does the right thing with pass-by-value
data types (the old code would always return 0 for int2 or char values,
which would work but would slow things down a lot). Extend opr_sanity
regress test to catch more kinds of errors.
function is found in prosrc field of pg_proc, not proname. This allows
multiple aliases of a built-in to all be implemented as direct builtins,
without needing a level of indirection through an SQL function. Replace
existing SQL alias functions with builtin entries accordingly.
Save a few K by not storing string names of builtin functions in fmgr's
internal table (if you really want 'em, get 'em from pg_proc...).
Update opr_sanity with a few more cross-checks.
so remove them from MergeJoin node. Hack together a partial
solution for commuted mergejoin operators --- yesterday
a mergejoin int4 = int8 would crash if the planner decided to
commute it, today it works. The planner's representation of
mergejoins really needs a rewrite though.
Also, further testing of mergejoin ops in opr_sanity regress test.
rule system semantics by having Var nodes referenced across multiple
parsetrees when rules split them.
Added more tests to the rules regression test.
The code in question resulted from v6.3 based development and was
a little careless applied to the v6.5 source tree.
Jan
for against a just updated CVS tree. It contains
Partial new rewrite system that handles subselects, view
aggregate columns, insert into select from view, updates
with set col = view-value and select rules restriction to
view definition.
Updates for rule/view backparsing utility functions to
handle subselects correct.
New system views pg_tables and pg_indexes (where you can
see the complete index definition in the latter one).
Enabling array references on query parameters.
Bugfix for functional index.
Little changes to system views pg_rules and pg_views.
The rule system isn't a release-stopper any longer.
But another stopper is that I don't know if the latest
changes to PL/pgSQL (not already in CVS) made it compile on
AIX. Still wait for some response from Dave.
Jan
here is the patch that includes PL/pgSQL into the build
(currently with make errors ignored) and adds a regression
test for it. A clean build and regression ran fine here.
Can you please apply it?
The tar should be extracted in /usr/local/src/pgsql and
creates the following files:
src/pl/Makefile
called by toplevel GNUmakefile and for now only calls
src/pl/plpgsql/Makefile
src/pl/plpgsql/Makefile
calls src/pl/plpgsql/src/Makefile (here the call to
make ignores build errors - this must be changed
later for the final release).
src/test/regress/input/install_plpgsql.source
SQL script installing PL/pgSQL language in regression
database. Will be modified by .../input/Makefile to
point to correct PGLIB directory where plpgsql.so
gets installed.
src/test/regress/output/install_plpgsql.source
expected output for installation script.
src/test/regress/sql/plpgsql.sql
the main regression test. It tests functions and
triggers written in PL/pgSQL including views that use
supportfunctions in this language.
src/test/regress/expected/plpgsql.out
the expected output for the above regression test.
make_plpgsql.diff
patch that adds some lines to
src/GNUmakefile.in
src/test/regress/expected/Makefile
src/test/regress/input/Makefile
src/test/regress/output/Makefile
src/test/regress/sql/Makefile
src/test/regress/sql/tests
test passes. Interestingly, the fix involves no changes or special
cases in the union test and actually removes a special case for the
numerology test. Thus, following the strategy outlined below is a
definite improvement over the previous situation.
Cheers,
Brook
>
> Please apply this HAVING regression patch.
> > My bad. It is caused by a known bug having to do with GROUP BY.
It ain't$
> > nothing to do with HAVING. For some reason the bug went away for a
while, $
> > script. It must have, because that is how I created the expected
file. :(
> >
> > A patch to the regression will be forthcoming.
>
the following to regress/sql/tests.
If applying by hand note that the setup_... must run before
the run_... (that I splitted these two was due to the errors
that occured when creating rules and using them then in the
same session - I'll post another fix for this later).
BTW: the regression tests sanity_checks and alter_table fail
now due to the remove of some indices and the oidint4 and
oidname types. At least expectes should be set to the current
results.
Thanks.
Jan
I have attached a patch to allow GROUP BY and/or ORDER BY function or
expressions. Note worthy items:
1. The expression or function need not be in the target list.
Example:
SELECT name FROM foo GROUP BY lower(name);
2. Simplified the grammar to use expressions only.
3. Cleaned up earlier patch in this area to make use of existing
utility functions.
3. Reduced some of the members in the SortGroupBy parse node. The
original data members were redundant with the new expression node.
(MUST do a "make clean" now)
4. Added a new parse node "JoinUsing". The JOIN USING clause was
overloading this SortGroupBy structure. With the afore mentioned
reduction of members, the two clauses lost all their commonality.
5. A bug still exist where, if a function or expression is GROUPed BY,
and an aggregate function does not include a attribute from the
expression or function, the backend crashes. (or something like
that) The bug pre-dates this patch. Example:
SELECT lower(a) AS lowcase, count(b) FROM foo GROUP BY lowcase;
*** BOOM ***
--Also when not in target list
SELECT count(b) FROM foo GROUP BY lower(a);
*** BOOM AGAIN ***
I have implemented a framework of encoding translation between the
backend and the frontend. Also I have added a new variable setting
command:
SET CLIENT_ENCODING TO 'encoding';
Other features include:
Latin1 support more 8 bit cleaness
See doc/README.mb for more details. Note that the pacthes are
against May 30 snapshot.
Tatsuo Ishii
src/test/regess/sql/junkfilter.sql -- SQL for
regression test src/test/regess/expected/junkfilter.out --
Expected output SQL for regression test
David Hartwig
Hi, here are patches I promised (against 6.3.2):
* character_length(), position(), substring() are now aware of
multi-byte characters
* add octet_length()
* add --with-mb option to configure
* new regression tests for EUC_KR
(contributed by "Soonmyung. Hong" <hong@lunaris.hanmesoft.co.kr>)
* add some test cases to the EUC_JP regression test
* fix problem in regress/regress.sh in case of System V
* fix toupper(), tolower() to handle 8bit chars
note that:
o patches for both configure.in and configure are
included. maybe the one for configure is not necessary.
o pg_proc.h was modified to add octet_length(). I used OIDs
(1374-1379) for that. Please let me know if these numbers are not
appropriate.
1. Remove the char2, char4, char8 and char16 types from postgresql
2. Change references of char16 to name in the regression tests.
3. Rename the char16.sql regression test to name.sql. 4. Modify
the regression test scripts and outputs to match up.
Might require new regression.{SYSTEM} files...
Darren King
Included are patches intended for allowing PostgreSQL to handle
multi-byte charachter sets such as EUC(Extende Unix Code), Unicode and
Mule internal code. With the MB patch you can use multi-byte character
sets in regexp and LIKE. The encoding system chosen is determined at
the compile time.
To enable the MB extension, you need to define a variable "MB" in
Makefile.global or in Makefile.custom. For further information please
take a look at README.mb under doc directory.
(Note that unlike "jp patch" I do not use modified GNU regexp any
more. I changed Henry Spencer's regexp coming with PostgreSQL.)
I thought it would be a good idea to ensure that the new view
permission model will not get broken by subsequent
fixes/changes. So I wrote a little regression test for it.
There is an ugly thing in this regression test. It creates
temporary a test user that is required for the tests. The
user is removed at the end of the test, but if sometimes the
regression suite is aborted or crashes exactly here, the test
user will lay around in the pg_shadow. Don't have a clue how
to get around.
Subject: [PATCHES] Patches for boolean, timespan and reltime regression tests.
Hi All,
Here are a couple of patches to the regression tests to introduce
some specific ordering to the results.
I've only made changes to the queries that were exhibiting differences
on my regression runs.
This will also have the side effect of testing the ordering code for
the boolean and some of the time types.
OK, here are a passel of patches for the geometric data types.
These add a "circle" data type, new operators and functions
for the existing data types, and change the default formats
for some of the existing types to make them consistant with
each other. Current formatting conventions (e.g. compatible
with v6.0 to allow dump/reload) are supported, but the new
conventions should be an improvement and we can eventually
drop the old conventions entirely.
For example, there are two kinds of paths (connected line segments),
open and closed, and the old format was
'(1,2,1,2,3,4)' for a closed path with two points (1,2) and (3,4)
'(0,2,1,2,3,4)' for an open path with two points (1,2) and (3,4)
Pretty arcane, huh? The new format for paths is
'((1,2),(3,4))' for a closed path with two points (1,2) and (3,4)
'[(1,2),(3,4)]' for an open path with two points (1,2) and (3,4)
For polygons, the old convention is
'(0,4,2,0,4,3)' for a triangle with points at (0,0),(4,4), and (2,3)
and the new convention is
'((0,0),(4,4),(2,3))' for a triangle with points at (0,0),(4,4), and (2,3)
Other data types which are also represented as lists of points
(e.g. boxes, line segments, and polygons) have similar representations
(they surround each point with parens).
For v6.1, any format which can be interpreted as the old style format
is decoded as such; we can remove that backwards compatibility but ugly
convention for v7.0. This will allow dump/reloads from v6.0.
These include some updates to the regression test files to change the test
for creating a data type from "circle" to "widget" to keep the test from
trashing the new builtin circle type.
'master' file
Commit mods to regress.sh so that split out tests are run...look forward
to finding out how to do a proper redirect to continue visual cleanup :)