The contents of an unlogged table are WAL-logged; thus, they are not
available on standby servers and are truncated whenever the database
system enters recovery. Indexes on unlogged tables are also unlogged.
Unlogged GiST indexes are not currently supported.
that it can scribble on scan->xs_ctup.t_self while following HOT chains,
so we can't rely on that to stay valid between hashgettuple() calls.
Introduce a private variable in HashScanOpaque, instead.
hash indexes keep entries sorted by hash value. First, the original plans for
concurrency assumed that insertions would happen only at the end of a page,
which is no longer true; this could cause scans to transiently fail to find
index entries in the presence of concurrent insertions. We can compensate
by teaching scans to re-find their position after re-acquiring read locks.
Second, neither the bucket split nor the bucket compaction logic had been
fixed to preserve hashvalue ordering, so application of either of those
processes could lead to permanent corruption of an index, in the sense
that searches might fail to find entries that are present.
This patch fixes the split and compaction logic to preserve hashvalue
ordering, but it cannot do anything about pre-existing corruption. We will
need to recommend reindexing all hash indexes in the 8.4.2 release notes.
To buy back the performance loss hereby induced in split and compaction,
fix them to use PageIndexMultiDelete instead of retail PageIndexDelete
operations. We might later want to do something with qsort'ing the
page contents rather than doing a binary search for each insertion,
but that seemed more invasive than I cared to risk in a back-patch.
Per bug #5157 from Jeff Janes and subsequent investigation.
value. This means that hash index lookups are always lossy and have to be
rechecked when the heap is visited; however, the gain in index compactness
outweighs this when the indexed values are wide. Also, we only need to
perform datatype comparisons when the hash codes match exactly, rather than
for every entry in the hash bucket; so it could also win for datatypes that
have expensive comparison functions. A small additional win is gained by
keeping hash index pages sorted by hash code and using binary search to reduce
the number of index tuples we have to look at.
Xiao Meng
This commit also incorporates Zdenek Kotala's patch to isolate hash metapages
and hash bitmaps a bit better from the page header datastructures.
SizeOfPageHeaderData instead of sizeof(PageHeaderData) in places where that
makes the code clearer, and avoid casting between Page and PageHeader where
possible. Zdenek Kotala, with some additional cleanup by Heikki Linnakangas.
I did not apply the parts of the proposed patch that would have resulted in
slightly changing the on-disk format of hash indexes; it seems to me that's
not a win as long as there's any chance of having in-place upgrade for 8.4.
corresponding struct definitions. This allows other headers to avoid including
certain highly-loaded headers such as rel.h and relscan.h, instead using just
relcache.h, heapam.h or genam.h, which are more lightweight and thus cause less
unnecessary dependencies.
indexscan always occurs in one call, and the results are returned in a
TIDBitmap instead of a limited-size array of TIDs. This should improve
speed a little by reducing AM entry/exit overhead, and it is necessary
infrastructure if we are ever to support bitmap indexes.
In an only slightly related change, add support for TIDBitmaps to preserve
(somewhat lossily) the knowledge that particular TIDs reported by an index
need to have their quals rechecked when the heap is visited. This facility
is not really used yet; we'll need to extend the forced-recheck feature to
plain indexscans before it's useful, and that hasn't been coded yet.
The intent is to use it to clean up 8.3's horrid @@@ kluge for text search
with weighted queries. There might be other uses in future, but that one
alone is sufficient reason.
Heikki Linnakangas, with some adjustments by me.
bucket number, so as to ensure locality of access to the index during the
insertion step. Without this, building an index significantly larger than
available RAM takes a very long time because of thrashing. On the other
hand, sorting is just useless overhead when the index does fit in RAM.
We choose to sort when the initial index size exceeds effective_cache_size.
This is a revised version of work by Tom Raney and Shreya Bhargava.
two buckets at the start, we create a number of buckets appropriate for the
estimated size of the table. This avoids a lot of expensive bucket-split
actions during initial index build on an already-populated table.
This is one of the two core ideas of Tom Raney and Shreya Bhargava's patch
to reduce hash index build time. I'm committing it separately to make it
easier for people to test the effects of this separately from the effects
of their other core idea (pre-sorting the index entries by bucket number).
delivering a well-randomized hash value. I got religion on this after
observing that performance of multi-batch hash join degrades terribly if the
higher-order bits of hash values aren't random, as indeed was true for say
hashes of small integer values. It's now expected and documented that hash
functions should use hash_any or some comparable method to ensure that all
bits of their output are about equally random.
initdb forced because this change invalidates existing hash indexes. For the
same reason, this isn't back-patchable; the hash join performance problem
will get a band-aid fix in the back branches.
buffers, rather than blowing out the whole shared-buffer arena. Aside from
avoiding cache spoliation, this fixes the problem that VACUUM formerly tended
to cause a WAL flush for every page it modified, because we had it hacked to
use only a single buffer. Those flushes will now occur only once per
ring-ful. The exact ring size, and the threshold for seqscans to switch into
the ring usage pattern, remain under debate; but the infrastructure seems
done. The key bit of infrastructure is a new optional BufferAccessStrategy
object that can be passed to ReadBuffer operations; this replaces the former
StrategyHintVacuum API.
This patch also changes the buffer usage-count methodology a bit: we now
advance usage_count when first pinning a buffer, rather than when last
unpinning it. To preserve the behavior that a buffer's lifetime starts to
decrease when it's released, the clock sweep code is modified to not decrement
usage_count of pinned buffers.
Work not done in this commit: teach GiST and GIN indexes to use the vacuum
BufferAccessStrategy for vacuum-driven fetches.
Original patch by Simon, reworked by Heikki and again by Tom.
pages it intends to zero immediately. Just to show there is some use for that
function besides WAL recovery :-).
Along the way, fold _hash_checkpage and _hash_pageinit calls into _hash_getbuf
and friends, instead of expecting callers to do that separately.
failed (due to lock conflicts or out-of-space). We might have already
extended the index's filesystem EOF before failing, causing the EOF to be
beyond what the metapage says is the last used page. Hence the invariant
maintained by the code needs to be "EOF is at or beyond last used page",
not "EOF is exactly the last used page". Problem was created by my patch
of 2006-11-19 that attempted to repair bug #2737. Since that was
back-patched to 7.4, this needs to be as well. Per report and test case
from Vlastimil Krejcir.
index types can be reliably distinguished by examining the special space
on an index page. Per my earlier proposal, plus the realization that
there's no need for btree's vacuum cycle ID to cycle through every possible
16-bit value. Restricting its range a little costs nearly nothing and
eliminates the possibility of collisions.
Memo to self: remember to make bitmap indexes play along with this scheme,
assuming that patch ever gets accepted.
Hashing for aggregation purposes still needs work, so it's not time to
mark any cross-type operators as hashable for general use, but these cases
work if the operators are so marked by hand in the system catalogs.
currentMarkData from IndexScanDesc to the opaque structs for the
AMs that need this information (currently gist and hash).
Patch from Heikki Linnakangas, fixes by Neil Conway.
it can handle small fillfactors for ordinary-sized index entries without
failing on large ones; fix nbtinsert.c to distinguish leaf and nonleaf
pages; change the minimum fillfactor to 10% for all index types.
discussion (including making def_arg allow reserved words), add missed
opt_definition for UNIQUE case. Put the reloptions support code in a less
random place (I chose to make a new file access/common/reloptions.c).
Eliminate header inclusion creep. Make the index options functions safely
user-callable (seems like client apps might like to be able to test validity
of options before trying to make an index). Reduce overhead for normal case
with no options by allowing rd_options to be NULL. Fix some unmaintainably
klugy code, including getting rid of Natts_pg_class_fixed at long last.
Some stylistic cleanup too, and pay attention to keeping comments in sync
with code.
Documentation still needs work, though I did fix the omissions in
catalogs.sgml and indexam.sgml.
This formulation requires every AM to provide amvacuumcleanup, unlike before,
but it's surely a whole lot cleaner. Also, add an 'amstorage' column to
pg_am so that we can get rid of hardwired knowledge in DefineOpClass().
misleadingly-named WriteBuffer routine, and instead require routines that
change buffer pages to call MarkBufferDirty (which does exactly what it says).
We also require that they do so before calling XLogInsert; this takes care of
the synchronization requirement documented in SyncOneBuffer. Note that
because bufmgr takes the buffer content lock (in shared mode) while writing
out any buffer, it doesn't matter whether MarkBufferDirty is executed before
the buffer content change is complete, so long as the content change is
completed before releasing exclusive lock on the buffer. So it's OK to set
the dirtybit before we fill in the LSN.
This eliminates the former kluge of needing to set the dirtybit in LockBuffer.
Aside from making the code more transparent, we can also add some new
debugging assertions, in particular that the caller of MarkBufferDirty must
hold the buffer content lock, not merely a pin.
when an error occurs during xlog replay. Also, replace the former risky
'write into a fixed-size buffer with no overflow detection' API for XLOG
record description routines; use an expansible StringInfo instead. (The
latter accounts for most of the patch bulk.)
Qingqing Zhou
on every index page they read; in particular to catch the case of an
all-zero page, which PageHeaderIsValid allows to pass. It turns out
hash already had this idea, but it was just Assert()ing things rather
than doing a straight error check, and the Asserts were partially
redundant with PageHeaderIsValid anyway. Per recent failure example
from Jim Nasby. (gist still needs the same treatment.)
access: define new index access method functions 'amgetmulti' that can
fetch multiple TIDs per call. (The functions exist but are totally
untested as yet.) Since I was modifying pg_am anyway, remove the
no-longer-needed 'rel' parameter from amcostestimate functions, and
also remove the vestigial amowner column that was creating useless
work for Alvaro's shared-object-dependencies project.
Initdb forced due to changes in pg_am.
convention for isnull flags. Also, remove the useless InsertIndexResult
return struct from index AM aminsert calls --- there is no reason for
the caller to know where in the index the tuple was inserted, and we
were wasting a palloc cycle per insert to deliver this uninteresting
value (plus nontrivial complexity in some AMs).
I forced initdb because of the change in the signature of the aminsert
routines, even though nothing really looks at those pg_proc entries...
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
keep track of portal-related resources separately from transaction-related
resources. This allows cursors to work in a somewhat sane fashion with
nested transactions. For now, cursor behavior is non-subtransactional,
that is a cursor's state does not roll back if you abort a subtransaction
that fetched from the cursor. We might want to change that later.
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
pghackers. This fixes the problem recently reported by Markus KrÌutner
(hash bucket split corrupts the state of scans being done concurrently),
and I believe it also fixes all the known problems with deadlocks in
hash index operations. Hash indexes are still not really ready for prime
time (since they aren't WAL-logged), but this is a step forward.
Bruce Momjian
Robert Haas
Magnus Hagander
Tom Lane
Alvaro Herrera
Neil Conway
PostgreSQL Daemon